[media] cx231xx: Add support for Iconbit U100

This patch adds support for the "Iconbit Analog Stick U100 FM".
Only composite & s-video inputs, no tuner support now.

Signed-off-by: Igor Novgorodov <igor@novg.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134 add new TV cards

Add new TV cards of Beholder Company. Just for autodetect.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Use a more consistent value for RC repeat period

The default REP_PERIOD is 33 ms. This doesn't make sense for IR's,
as, in general, an IR repeat scancode is provided at every 110/115ms,
depending on the RC protocol. So, increase its default, to do a
better job avoiding ghost repeat events.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>

[media] cx18: Move spinlock and vb_type initialisation into stream_init

The initialisation of vb_type in serialized_open was preventing
REQBUFS from working reliably. Remove it, and move the spinlock into
stream_init for good measure - it's only used when we have a stream
that supports videobuf anyway.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove tm6010 sif audio start and stop

remove tm6010 sif audio start and stop

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove unused exports

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add pts logging

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: change from ioctl to unlocked_ioctl

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: all audio packets must swab

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove input select

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: move from tm6000_set_reg to tm6000_set_reg_mask

move from tm6000_set_reg to tm6000_set_reg_mask

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove duplicated init

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove old tuner params

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove unused capabilities

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add eeprom

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: change input control

change input control

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: vitual input enums

vitual input enums

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: change to virtual inputs

change to virtual inputs

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add tm6010 audio mode setup

add tm6010 audio mode setup

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add radio capabilities

add radio capabilities

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Prevent null pointer derefernce of pdev

Make sure pdev is not dereferenced when it is null

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: allow to read back of detected parameters through S2API

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: add parameters_out

- Holds the parameters detected by the demod.
- Updated on every call to get_frontend, either through ioctl or when
  a frontend event occurs.
- Reset to input parameters after every call to set_frontend, tune or
  search/track.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: use shortcut to access fe->dtv_property_cache

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: remove unused assignments

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: rename parameters to parameters_in

- Preparation to distinguish input parameters from output parameters.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: call get_property at the end of dtv_property_process_get

- Drivers should be able to override properties returned to the user.
- The default values get prefilled from the cache.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dtv_property_cache_submit shouldn't modifiy the cache

- Use const pointers and remove assignments.
- delivery_system already gets assigned by DTV_DELIVERY_SYSTEM
  and dtv_property_cache_sync.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r: Update frontend capabilities to advertise QAM-256

This is supported in DVB-T2 mode, so added to the T/T2 frontend.

Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DocBook/dvb: Update to include DVB-T2 additions

A few new capabilities added to frontend.h for DVB-T2. Added these
to the documentation plus some notes explaining that they are
used by the T2 delivery system.

Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: mxl5005s: handle new bandwidths by returning -EINVAL

drivers/media/common/tuners/mxl5005s.c: In function ‘mxl5005s_set_params’:
drivers/media/common/tuners/mxl5005s.c:4016: warning: enumeration value ‘BANDWIDTH_5_MHZ’ not handled in switch
drivers/media/common/tuners/mxl5005s.c:4016: warning: enumeration value ‘BANDWIDTH_10_MHZ’ not handled in switch
drivers/media/common/tuners/mxl5005s.c:4016: warning: enumeration value ‘BANDWIDTH_1_712_MHZ’ not handled in switch

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: drxd_hard: handle new bandwidths by returning -EINVAL

drivers/media/dvb/frontends/drxd_hard.c: In function ‘DRX_Start’:
drivers/media/dvb/frontends/drxd_hard.c:2327: warning: enumeration value ‘BANDWIDTH_5_MHZ’ not handled in switch
drivers/media/dvb/frontends/drxd_hard.c:2327: warning: enumeration value ‘BANDWIDTH_10_MHZ’ not handled in switch
drivers/media/dvb/frontends/drxd_hard.c:2327: warning: enumeration value ‘BANDWIDTH_1_712_MHZ’ not handled in switch

[mchehab@redhat.com: removed the status = status assignment after the switch]
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: Add basic API support for DVB-T2 and bump minor version

[steve@stevekerrison.com: Remove private definitions from cxd2820r that existed before API was defined]
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] imon: Correct call to input_free_device

ictx->touch is intialied in imon_init_intf1, to the result of calling the
function that contains this code.  Thus, in this code, input_free_device
should be called on touch itself.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression struct input_dev * x;
expression ra,rr;
position p1,p2;
@@

x = input_allocate_device@p1(...)
...  when != x = rr
    when != input_free_device(x,...)
    when != if (...) { ... input_free_device(x,...) ...}
if(...) { ... when != x = ra
    when forall
    when != input_free_device(x,...)
\(return <+...x...+>; \| return@p2...; \) }

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

cocci.print_main("input_allocate_device",p1)
cocci.print_secs("input_free_device",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: enable IR support for Hauppauge HVR-1150/1120

Enable the IR support for the Hauppauge HVR-1150 and HVR-1120.

Thanks to Fernando Laudares Camargos for testing the patch.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Fernando Laudares Camargos <fernando.laudares.camargos@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] redrat3: new rc-core IR transceiver device driver

This is a new rc-core device driver for the IR transceivers made by
RedRat Ltd. (http://redrat.co.uk/). It started out life as an
out-of-lirc-tree lirc driver, maintained in its own repo on sourceforge,
by Stephen Cox. He started porting it to what was then ir-core, and I
finally picked it up about two week ago and did a fairly large overhaul
on it, and its now into a state where I'm fairly comfortable submitting
it here for review and inclusion in the kernel. I'm claiming authorship
of this driver, since while it started out as Stephen's work, its
definitely a derivative work now, at 876 lines added and 1698 lines
removed since grabbing it from sourceforge. Stephen's name is retained
as secondary author though, and credited in the headers. Those
interested in seeing how the changes evolved can (at least for now) look
at this branch in my git tree:

http://git.kernel.org/?p=linux/kernel/git/jarod/linux-2.6-ir.git;a=shortlog;h=refs/heads/redrat3

That won't be around forever though, and I'm doing this as a single
commit to go into mainline. Anyway...

I've successfully tested in-kernel decode of rc5, rc6 and nec remotes,
as well as lirc userspace decode of rc5 and rc6. There are still some
quirks here to sort out with rc5 lirc userspace decode, but I'm working
with the RedRat folks themselves to figure out what's going on there
(rc5 lirc decode works, but you only get an event on key release --
in-kernel rc5 decode behaves perfectly fine). Note that lirc decode of
rc6 is working perfectly. Transmit is also working, tested by pointing
the redrat3 at an mceusb transceiver, which happily picked up the
transmitted signals and properly decoded them.

There's no default remote for this hardware, so its somewhat arbitrarily
set to use the Hauppauge RC5 keymap by default. Easily changed out by
way of ir-keytable and irrelevant if you're using lircd for decode.

CC: Chris Dodge <chris@redrat.co.uk>
CC: Andrew Vincer <Andrew.Vincer@redrat.co.uk>
CC: Stephen Cox <scox_nz@yahoo.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: add locking to fix register/show race

When device_add is called in rc_register_device, the rc sysfs nodes show
up, and there's a window in which ir-keytable can be launched via udev
and trigger a show_protocols call, which runs without various rc_dev
fields filled in yet. Add some locking around registration and
store/show_protocols to prevent that from happening.

The problem manifests thusly:

[64692.957872] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
[64692.957878] IP: [<ffffffffa036a4c1>] show_protocols+0x47/0xf1 [rc_core]
[64692.957890] PGD 19cfc7067 PUD 19cfc6067 PMD 0
[64692.957894] Oops: 0000 [#1] SMP
[64692.957897] last sysfs file: /sys/devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/rc/rc2/protocols
[64692.957902] CPU 3
[64692.957903] Modules linked in: redrat3(+) ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder rc_hauppauge ir_nec
_decoder rc_core ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_mi
di_event snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem pcsp
kr tg3 snd_hwdep emu10k1_gp snd amd64_edac_mod gameport edac_core soundcore edac_mce_amd k8temp shpchp i2c_piix4 lm63 e100 mii uinput ipv6 raid0 rai
d1 ata_generic firewire_ohci pata_acpi firewire_core crc_itu_t sata_svw pata_serverworks floppy radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core
[last unloaded: redrat3]
[64692.957949] [64692.957952] Pid: 12265, comm: ir-keytable Tainted: G   M    W   2.6.39-rc6+ #2 empty empty/TYAN Thunder K8HM S3892
[64692.957957] RIP: 0010:[<ffffffffa036a4c1>]  [<ffffffffa036a4c1>] show_protocols+0x47/0xf1 [rc_core]
[64692.957962] RSP: 0018:ffff880194509e38  EFLAGS: 00010202
[64692.957964] RAX: 0000000000000000 RBX: ffffffffa036d1e0 RCX: ffffffffa036a47a
[64692.957966] RDX: ffff88019a84d000 RSI: ffffffffa036d1e0 RDI: ffff88019cf2f3f0
[64692.957969] RBP: ffff880194509e68 R08: 0000000000000002 R09: 0000000000000000
[64692.957971] R10: 0000000000000002 R11: 0000000000001617 R12: ffff88019a84d000
[64692.957973] R13: 0000000000001000 R14: ffff8801944d2e38 R15: ffff88019ce5f190
[64692.957976] FS:  00007f0a30c9a720(0000) GS:ffff88019fc00000(0000) knlGS:0000000000000000
[64692.957979] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[64692.957981] CR2: 0000000000000090 CR3: 000000019a8e0000 CR4: 00000000000006e0
[64692.957983] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[64692.957986] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[64692.957989] Process ir-keytable (pid: 12265, threadinfo ffff880194508000, task ffff88019a9fc720)
[64692.957991] Stack:
[64692.957992]  0000000000000002 ffffffffa036d1e0 ffff880194509f58 0000000000001000
[64692.957997]  ffff8801944d2e38 ffff88019ce5f190 ffff880194509e98 ffffffff8131484b
[64692.958001]  ffffffff8118e923 ffffffff810e9b2f ffff880194509e98 ffff8801944d2e18
[64692.958005] Call Trace:
[64692.958014]  [<ffffffff8131484b>] dev_attr_show+0x27/0x4e
[64692.958014]  [<ffffffff8118e923>] ? sysfs_read_file+0x94/0x172
[64692.958014]  [<ffffffff810e9b2f>] ? __get_free_pages+0x16/0x52
[64692.958014]  [<ffffffff8118e94c>] sysfs_read_file+0xbd/0x172
[64692.958014]  [<ffffffff8113205e>] vfs_read+0xac/0xf3
[64692.958014]  [<ffffffff8113347b>] ? fget_light+0x3a/0xa1
[64692.958014]  [<ffffffff811320f2>] sys_read+0x4d/0x74
[64692.958014]  [<ffffffff814c19c2>] system_call_fastpath+0x16/0x1b

Its a bit difficult to reproduce, but I'm fairly confident this has
fixed the problem.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: passing ep to request_packet is redundant

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc-winfast: fix inverted left/right key mappings

Reported-by: Douglas Clowes <dclowes1@optusnet.com.au>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ite-cir: finish tx before suspending

Continuing with IR transmit after resuming from suspend seems fairly
useless, given that the only place we can actually end up suspending is
after IR has been send and we're simply mdelay'ing. Lets simplify the
resume path by just waiting on tx to complete in the suspend path, then
we know we can't be transmitting on resume, and reinitialization of the
hardware registers becomes more straight-forward.

CC: Juan Jesús García de Soria <skandalfo@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ite-cir: clean up odd spacing in ite8709 bits

There was some rather odd spacing in a few of the ite8709-specific
functions that made it hard to read those sections of code. This is just
a simple reformatting.

CC: Juan Jesús García de Soria <skandalfo@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ite-cir: make IR receive work after resume

Just recently acquired an Asus Eee Box PC with an onboard IR receiver
driven by ite-cir (ITE8713 sub-variant). Works out of the box with the
ite-cir driver in 2.6.39, but stops working after a suspend/resume
cycle. Its fixed by simply reinitializing registers after resume,
similar to what's done in the nuvoton-cir driver. I've not tested with
any other ITE variant, but code inspection suggests this should be safe
on all variants.

Reported-by: Stephan Raue <sraue@openelec.tv>
CC: Juan Jesús García de Soria <skandalfo@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] imon: clean up disconnect routine

- Eliminate a possible circular locking lockdep warning
- Make sure we don't try to unregister a vfd on a device w/a vga screen
- Always free imon context after devices are removed (display_close can
  just error out w/no context)

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] nuvoton-cir: minor tweaks to rc dev init

- Set a default timeout (matching mceusb.c) and use
  ir_raw_event_store_with_filter, which leads to better behavior when
  using lirc userspace decoding with this hardware
- Fill in rx_resolution with the value we're using here (50us)
- Wire up input phys and device parent pointer
- Use device_init_wakeup() instead of device_set_wakeup_*()

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add M420 format support

The M420 format is used by the Microsoft LifeCam Studio HD.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[laurent.pinchart@ideasonboard.com: split into v4l/uvcvideo patches]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Add M420 format definition

M420 is a hybrid YUV 4:2:0 packet/planar format. Two Y lines are
followed by an interleaved U/V line.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[laurent.pinchart@ideasonboard.com: split into v4l/uvcvideo patches]
[laurent.pinchart@ideasonboard.com: add documentation]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add support for NOMMU arch

Add support to uvc driver for NOMMU arch including add function
uvc_queue_get_unmapped_area() and make some changes in uvc_queue_mmap().
So that uvc camera can be used on nommu arch like blackfin.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Revert "V4L/DVB: v4l2-dev: remove get_unmapped_area"

This reverts commit c29fcff3daafbf46d64a543c1950bbd206ad8c1c.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: mt9m111: fix pixel clock

This camera driver supports only rising edge, which is the default
setting of the device. The function mt9m111_setup_pixfmt() overwrites
this setting. So the driver actually uses falling edge.
This patch corrects that.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
[g.liakhovetski@gmx.de: removed superfluous register write]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: mt9v022: fix pixel clock

The setup of the pixel clock is done wrong in the mt9v022 driver.
The 'Invert Pixel Clock' bit has to be set to 1 for falling edge
and not for rising. This is not clearly described in the data
sheet.

Tested on pcm037 and pcm027/pcm990.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: a missing mediabus code -> fourcc translation is not critical

soc_mbus_get_fmtdesc() returning NULL means only, that no standard
mediabus code -> fourcc conversion is known, this shouldn't be treated
as an error by drivers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: add more format look-up entries

Add new look-up entries for all mediabus codes, for which respective
fourcc codes exist.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: add a new packing for YUV 4:2:0 type formats

12-bit formats, similar to YUV 4:2:0 occupy 3 bytes for each two pixels
and cannot be described by any of the existing SOC_MBUS_PACKING_* macros.
This patch adds a new one SOC_MBUS_PACKING_1_5X8 to describe such
formats and extends soc_mbus_samples_per_pixel() to support it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: omap1-camera: fix huge lookup array

Since V4L2_MBUS_FMT_* codes have become large and sparse, they cannot
be used as array indices anymore.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: avoid huge arrays, caused by changed format codes

Recently mediabus pixel format codes have become a part of the user-
space API, at which time their values also have been changed from
contiguous numbers, running from 0 to sparse numbers with values
around 0x1000, 0x2000, 0x3000... This made them unsuitable for the
use as array indices. This patch switches soc-camera internal format
look-ups to not depend on values of those macros.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: add MIPI bus flags

Signed-off-by: Kassey Lee <ygli@marvell.com>
Signed-off-by: Qing Xu <qingx@marvell.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: add JPEG support

Signed-off-by: Qing Xu <qingx@marvell.com>
Signed-off-by: Kassey Lee <ygli@marvell.com>
[g.liakhovetski@gmx.de: fixed compiler warning]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: sh_mobile_ceu_camera: implement live cropping

PRELIMINARY: break out spinlock changes; consider multiple completing
feames, causing multiple complete() calles.

Add live crop support to the sh_mobile_ceu driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: soc-camera: add a livecrop host operation

Add an soc-camera host livecrop operation to implement live zoom. If
a host driver implements it, it should take care to preserve output
frame format, then live crop doesn't break streaming.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: mx3_camera: implement .stop_streaming()

The .stop_streaming() videobuf2 operation has to be implemented to
guarantee, that video buffers are not written to after a STREAMOFF.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: sh_mobile_ceu_camera: implement .stop_streaming()

The .stop_streaming() videobuf2 operation has to be implemented to
guarantee, that video buffers are not written to after a STREAMOFF.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-csis: Do not use uninitialized variables in s5pcsis_suspend

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Add v4l2 subdev driver for S5P/EXYNOS4 MIPI-CSI receivers

Add the subdev driver for the MIPI CSIS units available in S5P and
Exynos4 SoC series. This driver supports both CSIS0 and CSIS1
MIPI-CSI2 receivers.
The driver requires Runtime PM to be enabled for proper operation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Move s5p-fimc driver into Video capture devices

s5p-fimc now also implements a camera capture video node so move
it under the "Video capture devices" Kconfig menu. Also update
the entry to reflect the driver's coverage of EXYNOS4 SoCs and
separate the Makefile entry from the soc-camera drivers set.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Add V4L2_MBUS_FMT_JPEG_1X8 media bus format

Add V4L2_MBUS_FMT_JPEG_1X8 format and the corresponding Docbook
documentation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - kinect: fix comments referring to color camera

Use the expression "video stream" instead of "color camera" which is
more correct as the driver supports the RGB and IR image on the same
endpoint.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - kinect: fix a typo s/steram/stream/

Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - kinect: move communications buffers out of stack

Move large communications buffers out of stack and into device
structure. This prevents the frame size from being >1kB and fixes a
compiler warning when CONFIG_FRAME_WARN=1024:

drivers/media/video/gspca/kinect.c: In function ‘send_cmd.clone.0’:
drivers/media/video/gspca/kinect.c:202: warning: the frame size of 1548 bytes is larger than 1024 bytes

Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: return meaningful error codes in dvb_frontend

- Return values should not be ORed. Abort early instead.
- Return -EINVAL instead of -1.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Kconfig: Fix indention of ---help--- for timerdale driver

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/dvb: Improve description of the DVB API v5

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiBxxxx: get rid of DMA buffer on stack

This patch removes the remaining on-stack buffer for USB DMA transfer.
This patch also reduces the stack memory usage.

Cc: stable@kernel.org
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] via-camera: add MODULE_ALIAS

This fixes autoloading of the module.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: Fix warnings introduced during cleanup

I misused the ktime API, and failed to remove some traces of the
in-kernel format conversion. Fix these, so the the driver builds
without warnings.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Make the API public

Move the public API definitions to include/linux/uvcvideo.h and bump the
version number to 1.1.0. Compatibility with the old API is kept,
application can still be compiled against the private header and will
not break.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Return -ERANGE when userspace sets an unsupported menu entry

Instead of passing the value down to the device and getting an error
back (or worse, crashing the firmware), return -ERANGE when the
requested menu entry is not supported.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Don't report unsupported menu entries

Supported menu entries are reported by the device in response to the
GET_RES query. Use the information to return -EINVAL to userspace for
unsupported values when enumerating menu entries.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Override wrong bandwidth value for Hercules Classic Silver

Set the FIX_BANDWIDTH quirk for the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add support for JMicron USB2.0 XGA WebCam

The camera requires the PROBE_MINMAX quirk. Add a corresponding entry
in the device IDs list

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add support for V4L2_PIX_FMT_RGB565

The TomTom navigation system used in the Sony XNV 660BT and 770BT
reports an RGB565 (RGBP) format, support it in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add driver documentation

This adds detailed documentation about the driver's extension unit control
features. Part of it has been adopted from the dynctrl.txt that used to be
available in the driver's previous Subversion repository.

The documentation has been rewritten to match the current implementation, in
particular to capture the new XU control support including UVCIOC_CTRL_QUERY.

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Rename UVC_CONTROL_* flags to UVC_CTRL_FLAG_*

This makes the public driver API more uniform, in preparation of moving
uvcvideo.h to include/linux. Keep the old names for backward
compatibility with existing applications.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Deprecate UVCIOC_CTRL_{ADD,MAP_OLD,GET,SET}

Those ioctls are deprecated, list them in the features removal schedule
for 2.6.42.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add UVCIOC_CTRL_QUERY ioctl

This ioctl extends UVCIOC_CTRL_GET/SET by not only allowing to get/set
XU controls but to also send arbitrary UVC commands to XU controls,
namely GET_CUR, SET_CUR, GET_MIN, GET_MAX, GET_RES, GET_LEN, GET_INFO
and GET_DEF. This is required for applications to work with XU controls,
so that they can properly query the size and allocate the necessary
buffers.

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: Bump driver version to 1.5.0

To simplify maintainer support of this driver, bump the version to
1.5.0 - this will be the first version that is expected to support
mmap() for raw video frames.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: Clean up mmap() support for raw YUV

The initial version of this patch (commit
d5976931639176bb6777755d96b9f8d959f79e9e) had some issues:

 * It didn't correctly calculate the size of the YUV buffer for 4:2:2,
   resulting in capture sometimes being offset by 1/3rd of a picture.

 * There were a lot of variables duplicating information the driver
   already knew, which have been removed.

 * There was an in-kernel format conversion - libv4l can do this one,
   and is the right place to do format conversions anyway.

 * Some magic numbers weren't properly explained.

Fix all these issues, leaving just the move from videobuf to videobuf2
to do.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cpia2: fix typo in variable initialisation

Currently 'fh' initialises to whatever happens to be on stack. This
looks like a typo and this patch fixes that.

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r: switch automatically between DVB-T and DVB-T2

Remove old DVB-T2 freq module param and detect DVB-T/T2 automatically.

Implementation is trial and error, if DVB-T does not lock try DVB-T2
and vice versa. That's done by replacing normal DVBFE_ALGO_SW with
DVBFE_ALGO_CUSTOM which gives better control for tuning process.

DVB-C still uses normal software ZigZag, DVBFE_ALGO_SW.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r: whitespace fix

Make checkpatch.pl happy by fixing whitespaces introduced by
commit 79e8b8e3b8cbf67130247a3f6d25732373fe2f34

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Disable audio for EM28174

Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r: make C, T, T2 and core components as linked objects

Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add support for PCTV nanoStick T2 290e [2013:024f]

Supports DVB-T/T2/C, USB ID: 2013:024f.
Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Sony CXD2820R DVB-T/T2/C demodulator driver

It is very first DVB-T2 Linux driver!

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add support for EM28174 chip

EM28174 is very similar as already supported EM2874.
I am not sure what are differences, but it could be analog support.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Multi Frontend (MFE) support

Register multiple FEs for same adapter. After that it is
possible to register two FEs for same adapter. For example
one for DVB-T and one for DVB-C.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18271: add DVB-C support

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx24116: make FW DL split more readable

Change firmware download split, which I introduced few patch earlier,
a little bit to make it more readable as requested [1].

Anyhow, for some reason this seems to increase compiled binary size
52 bytes, on my AMD64 box, which is rather much for so small change.

[1] http://www.spinics.net/lists/linux-media/msg31968.html

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] anysee: add support for Anysee E7 S2

It is DVB-S/S2 USB box.

* DNBU10512IST NIM
 * STV0903 demod
 * STV6110 tuner

* Intersil ISL6423 LNB controller

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] anysee: add support for Anysee E30 S2 Plus

It is USB DVB-S/S2 box.

Conexant cx24116/cx24118 demod tuner combo
Intersil ISL6423 LNB controller

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx24116: add config option to split firmware download

It is very rare I2C adapter hardware which can provide 32kB I2C write
as one write. Add .i2c_wr_max option to set desired max packet size.
Split transaction to smaller pieces according to that option.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>