Tony Lindgren [Tue, 26 Jan 2010 03:48:35 +0000 (19:48 -0800)]
Linux-omap rebuilt: omap-fixes merged to mainline
$ git checkout -b tmp-rebuild-
1264477604 linus
$ git merge -m "Merge omap-fixes" omap-fixes
$ git merge -m "Merge omap-testing" omap-testing
$ git merge -m "Merge for-next" for-next
$ git merge -m "Merge cbus" cbus
$ git merge -s ours master
$ git checkout master
$ git merge tmp-rebuild-
1264477604
To view the changes since the last rebuild, please do
$ git diff
c48807a26251343c3e8f24d1a42cb024e5584a86..
0e0bb7f4c064aee30d0cdeff784f064cd9fdc6a0 arch/arm/*omap*/
Tony Lindgren [Tue, 26 Jan 2010 03:48:31 +0000 (19:48 -0800)]
Merge cbus
Tony Lindgren [Tue, 26 Jan 2010 03:48:30 +0000 (19:48 -0800)]
Merge for-next
Tony Lindgren [Tue, 26 Jan 2010 03:48:29 +0000 (19:48 -0800)]
Merge omap-testing
Francisco Alecrim [Tue, 26 Jan 2010 03:46:31 +0000 (19:46 -0800)]
fix compile for tahvo-usb.c
drivers/cbus/tahvo-usb.c:138: undefined reference to 'usb_bus_start_enum'
usb_bus_start_enum only exported if USB_OTG enabled
Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Francisco Alecrim [Tue, 26 Jan 2010 03:46:30 +0000 (19:46 -0800)]
n8x0_defconfig: active cbus, retu-wd and omap-wd
It's critical for correct n8x0 operation. Device turn power-off after some
seconds without these options.
Signed-off-by: Francisco Alecrim <alecrim@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:46:30 +0000 (19:46 -0800)]
cbus: add platform_data to pass gpios
also add the platform_data to the related
board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:46:30 +0000 (19:46 -0800)]
cbus: move to platform_driver
also add the platform_device to 770 and n8x0 board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:46:29 +0000 (19:46 -0800)]
cbus: separate into several MODULE_AUTHOR entries
will look cleaner on modinfo.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:46:29 +0000 (19:46 -0800)]
cbus: move EXPORT_SYMBOL close to its exported symbols
while there, also add a missing static to cbus_bus_init().
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:46:29 +0000 (19:46 -0800)]
cbus: switch to kzalloc
change kmalloc() + memset() to kzalloc(), no functional
changes.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:46:28 +0000 (19:46 -0800)]
cbus: tahvo-usb: make it build again
plenty of legacy code sitting there. Make it build
again. Later patches will come to clean that up.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 26 Jan 2010 03:46:28 +0000 (19:46 -0800)]
cbus: Make retu watchdog behave like a standard Linux watchdog
Make retu watchdog behave like a standard Linux watchdog.
Let the kernel do the kicking until the watchdog device is opened.
Note: We should remove the old non-standard interface, please
change to use standard /dev/watchdog instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 26 Jan 2010 03:46:28 +0000 (19:46 -0800)]
cbus: Fix compile and don't try to use tag
Fix compile and don't try to use tag
This should be really passed as platform_data from
the board-*.c files.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 26 Jan 2010 03:46:27 +0000 (19:46 -0800)]
omap: Search and replace headers to use plat
Search and replace headers to use plat
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Tue, 26 Jan 2010 03:46:27 +0000 (19:46 -0800)]
omap: Add drivers/cbus support
CBUS is the bus that Energy Management ASICs are connected to on
some Nokia mobile devices. Added support for CBUS and two EM ASIC
drivers.
This commit is a merge of all the commits that were in the linux-omap
tree:
aae6da6d5f09307b1feb391a47d1ddb6bf2d523e CBUS: Switch to gpio_request/free calls
702e65cebefe0af8ac4a648286f229947f3e1b68 cbus build fixes
f03fdeddbbaafb57f0f62629a316036f270a973d use gpio_to_irq (OMAP tree only)
570f10b7d3aaa3d542b749622df2a1f86e54ebc3 use gpio_direction_output (OMAP tree only)
d59842e6881e8f58cb17de5c0d11866796347d50 use gpio_direction_input (OMAP tree only)
7270f33b7b0139f40fcfbf771dc5ec5a773a71cd use standard gpio get/set calls (OMAP tree only)
f228a725b975832ac5771ab2fc86d06bd694cdb3 ARM: OMAP: Remove io_p2v, use ioremap and XXX_IO_ADDRESS
fdee8764947cde1e6933e7d981ce5b9de00e83e6 Merge current mainline tree into linux-omap tree
5061bcd119547453b32c847d2b9490a052bc1755 Merge mainline v2.6.27-rc2 tree into linux-omap tree
2d46b9c984d1c862f2525b4d0cabcb092f77ac64 CBUS: A workaround for ADC S/H HW bug: always keep ch 8 selected when S/H is used
648f41f57c2bfa7152f0760ca29a1e9dac566ca4 USB: Change omap USB code to use omap_read/write instead of __REG for multi-omap
d305c615bb7f85d49788a4ed28cb6aace2317ab7 ARM: OMAP: Misc compile fixes
bfbd53fcc738ff33ebcf91bc3ef25ae637cc4175 CBUS: Checkpatch.pl fixes for retu-wdt.c
2d28be5848928fbb17952e8eb5295fb506e0c40e CBUS: Fix retu mutex handling
7faa6dd4ae4db44f9c3142484266e17080314d79 CBUS: Fix retu-headset driver by not using removed input_dev->private field
8964c7d13133723ef2fe6a2b798a3fd336b15f4e ARM: OMAP: Add return value check for input_register_device()
2cf7bc8a039d6a6b4558c8c3a319ea15eccab60c CBUS: Fix retu-headset driver by not using removed input_dev->cdev field
97b705ad835f1481270c4b67b402d6e37fa8ad15 ARM: OMAP: Misc compile fixes after syncing with mainline
488de021a75771df95473c85bfaa9c8f1c9db659 tahvo-usb: compile fix usb/gadget.h
d079a1c74ea46f75cc406838c45652b97205e6be CBUS: Do not BUG_ON in retu-headset in case of spurious release event
074e3419440ba83e659be554f827e928826b512d CBUS: Fix reentrant issues in retu-headset driver
9afd4b705891e8afd505ecabec25539b22416d7a CBUS: Manage bias voltage in retu-headset suspend/resume code
0de1ae4b1cee28514dec435bf58c4b5960dfb4e1 CBUS: Cleanup retu-headset driver
dff99b718dffb5c041c99eebb3607f411d377f4d ARM: OMAP: Misc compile fixes after updating to current mainline tree
e0f2c271e0e3feaab8f8190b39876683099d3f6a ARM: OMAP: Fix inconsistency of completion in retu-rtc
6cda72c73944cc50250b3ae959174b6778d5e19f ARM: OMAP: Fix USB compilation for N770 defconfig
d041f80e997ff7c21b14fdee920a034e576aa226 CBUS: Add driver for Retu/Vilma headset detection
699d8412c1bf505f24d1a2048b49b8ffd8fe1d00 ARM: OMAP: Clean up bitrot to sync with mainline
ba9ca80b6468c5500a84a5c5e84383a6925a0bc3 ARM: OMAP: Convert driver interrupt flags SA_* to IRQF_*
7adeaaa4390dff8dcd4e44e6bcb144befcc2816f ARM: OMAP: Workqueue changes for retu-rtc
708739a058a59b76f72062bda81fb961e05d61e8 ARM: OMAP: Workqueue changes for tahvo-usb
995dda5fa21c77d337fa2fc07914ecb15cd08e54 ARM: OMAP: Fix warnings in N770 build
e2f0b012fd0fc16899dcdabc0b43fabdfdadcd8c ARM: OMAP: Fix broken N770 build (tahvo-usb)
d5c772f519236d8683b460e5da37f4a943ca4aae Fix some pt_regs users
229b59cdb41742aa4aee3628962af6ef2c4d944a Sync with mainline: Get rid of unnecessary pt_regs
b983452be56be4169233c34be1134e8030be674b Sync with mainline: Get rid of <#include linux/config.h>
77845293a4eb6cfea806ecc74ea9988c044a76bc CBUS: Retu: add atomic set and clear register bits function
d2db44bd92af99576cdf976f7dfc95f54884b14d CBUS: Tahvo: add atomic set and clear register bits function
e19cba0ecf9dd2d9adfdba175e335aebe973023a CBUS: Enable suspend wakeup for Retu IRQ
8c81aa40bea255769f13449dfb7699552ddb8438 Merge source.mvista.com:/home/git/linux-omap-2.6
1230366a669d16c7a292586adc7ab0725395f5b4 Manual merge to make things compile after updating to 2.6.18-rc4
6b411907432fe97bce3e6a253f6b98ab6c105efc CBUS: turn off tahvo-usb OTG idle mode during enabling
e3b2a7b6c6bcb4d6e839695fdac3e23b86046f98 CBUS: Make Retu RTC and Tahvo USB drivers use sysfs_notify
fe3702054f6412aea04373ceb9d27a4a417ff3f0 OMAP: Fix USB on Nokia 770
9c926661738080ee298bc3a51240dd102973fa61 [PATCH] ARM: OMAP: tahvo_user: sem2mutex conversion
ea90ef431139e4ac40b1d08726f45283f98d50ef [PATCH] ARM: OMAP: tahvo usb: sem2mutex conversion
06563a863d399ab6a3a5c104ddf086030f33b6f6 [PATCH] ARM: OMAP: retu-user: sem2mutex conversion
72a222f41989a4b8ad8cddf62c47608ad2e9e358 [PATCH] ARM: OMAP: retu-rtc: sem2mutex conversion
7508d984603f5ce3cb6883c229c97ed0a35d24c6 [PATCH] CBUS: Fix tahvo-usb omap_otg_remove
07f4f04763e2ff4333d44bec438d4bacbea0b4ae CBUS: Convert Retu power button driver to use input_allocate_device()
c604ff0bb1bbd3c6bf14bb9e5cae67c5a89e4ece cbus: Update tahvo-usb for kernel API changes.
f5c9432bb9bd44968cb785e3bb8aad95d6af3431 [PATCH] ARM: OMAP: gpio-switch and retu-rtc kobject_uevent() fixes
517df76f9295ac1865494476e8b531c65232dc5a ARM: OMAP: Replace clock.h with clk.h
93cb1e87df6ac03d315c0408634831e7db898a77 ARM: OMAP: Support for new Retu chips
480a299b3f3a5302f068fb7e3c68069ab3d355a5 ARM: OMAP: Support for 7-bit backlight register on new Tahvo chips
19deb6846965d9fdd5a87cae3593a953ccfea778 ARM: OMAP: Add CBUS support
vikram pandita [Tue, 26 Jan 2010 03:46:20 +0000 (19:46 -0800)]
omap: zoom3: enable ehci support
Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy.
GPIO_64 is connected to the PHY reset pin.
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Gadiyar, Anand <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
vikram pandita [Tue, 26 Jan 2010 03:46:19 +0000 (19:46 -0800)]
omap: serial: fix coding style indentaion
No logical code change
Fix coding style indentaion as per checkpatch.pl
Fix multi-line comment style reported by Nishanth Menon
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Menon, Nishanth <nm@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lesly A M [Tue, 26 Jan 2010 03:46:19 +0000 (19:46 -0800)]
omap3: pm: Add T2 Keypad as a wakeup source
Changes for setting the padconf value for sys_nirq line which is
connected to T2 INTR1. This will fix the T2 keypad wakeup.
Signed-off-by: Lesly A M <x0080970@ti.com>
Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sriram [Tue, 26 Jan 2010 03:46:19 +0000 (19:46 -0800)]
ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
OMAP platforms(like OMAP3530) include DSP or other co-processors
for media acceleration. when carving out memory for the
accelerators we can end up creating a hole in the memory map
of sort:
<kernel memory><hole(memory for accelerator)><kernel memory>
To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL
has to be enabled. For further information refer discussion at:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html.
Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 26 Jan 2010 03:46:19 +0000 (19:46 -0800)]
omap: Clean-up for omap_mux_init
Get rid of the ifdeffery in omap_mux_init by creating
omap_mux_init_package and omap_mux_init_signals functions.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Tue, 26 Jan 2010 03:46:18 +0000 (19:46 -0800)]
MTD: remove no longer used OMAP flash map
All OMAP boards are now using physmap-flash.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Tue, 26 Jan 2010 03:46:18 +0000 (19:46 -0800)]
omap: convert boards to use physmap-flash
Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Roel Kluin [Tue, 26 Jan 2010 03:45:54 +0000 (19:45 -0800)]
USB: musb: don't dereference NULL tusb_dma indma_controller_destroy()
Test whether tusb_dma is not NULL before dereferencing
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 26 Jan 2010 03:45:53 +0000 (19:45 -0800)]
usb: host: ehci: adding regulator framework in ehci-omap.cdriver
OMAP3 has three HS USB ports so it can have three different regulator
for each PHY connected to each port.
Currently these regulators are assumed to be optional and driver doesn't
fail but continue with the initialization if it doesn't get any regulators.
Regulator supply names has to be mapped in board files as 'hsusbN' where
'N' is port number and can be {0, 1 ,2}.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 26 Jan 2010 03:45:53 +0000 (19:45 -0800)]
usb: host: ehci: fix missing kfree in remove path also
Added missing kfree() in ehci_hcd_omap_remove().
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 26 Jan 2010 03:45:52 +0000 (19:45 -0800)]
usb: musb: Add 'extvbus' in musb_hdrc_platform_data
Some of the board might use external Vbus power supply on musb
interface which would require to program ULPI_BUSCONTROL register.
Adding 'extvbus' flag which can be set from such boards which will
be checked at musb driver files before programming ULPI_BUSCONTROL.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 26 Jan 2010 03:45:52 +0000 (19:45 -0800)]
usb: musb: save dynfifo in musb struct
Save dynamic FIFO read only information for later uses during
musb_save/restore_context functions.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnaud Mandy [Tue, 26 Jan 2010 03:45:52 +0000 (19:45 -0800)]
usb: musb: handle irqs in the order dictated by programmingguide
MUSB's programming guide dictates how we should handle its
irqs and in which order. Follow that.
Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Bryan Wu [Tue, 26 Jan 2010 03:45:51 +0000 (19:45 -0800)]
usb: musb: clean up commit 'workaround Blackfin FIFO anomalies'
The version applied had a few comments which are now
done.
Thanks to Sergei for pointing out.
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Swaminathan S [Tue, 26 Jan 2010 03:45:51 +0000 (19:45 -0800)]
usb: musb: Fix cppi_channel_abort() function to handle Txabort correctly
This patch fixes the Tx abort/teardown logic. We now wait for the teardown
completion interrupt and acknowledge the same by setting the tx_complete
register to 0.
This change is needed to ensure that abort processing works on DM365 platform.
Without this change after completion of abort processing the system is
overwhelmed with continuous stream of abort interrupts.
This change has been tested on all CPPI3.x platforms (DM644x, DM646x, DM35x,
DM36x).
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Swaminathan S [Tue, 26 Jan 2010 03:45:51 +0000 (19:45 -0800)]
usb: musb: workaround toggle bug when doing bulk transferafter isoc
This patch implements the work around for a Mentor controller related
bug where it's observed a BULK Tx toggle error on the bus when a
BULK IO gets scheduled on an endpoint that was earlier used for
handling ISOC transaction and needed to start on 1 toggle. When such
a situation arises even if the TXCSR toggle bits are programmed
correctly by the musb driver the data gets transmitted with 0 toggle
which leads to toggle error on the bus and the BULK transaction fails.
In case of MSC write, the device gets reset by the Host.
This Mentor bug is observed on almost all Mentor versions (1.3, 1.5,
1.8). Confirmed on DM644x, DM355, DM365, OMAPL13x platforms.
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Anand Gadiyar [Tue, 26 Jan 2010 03:45:50 +0000 (19:45 -0800)]
[PATCH/USB,
MUSB DMA_INTR register may sometimes read zero when infact there
was a pending interrupt. Workaround this by reading the DMA_COUNT
values for all enabled channels when this condition occurs.
Flag these channels as the ones needing to be serviced.
Additionally, the absence of a debug print meant we would never
catch a spurious DMA interrupt in MUSB. So this patch adds a
debug print in the IRQ handler.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Anand Gadiyar [Tue, 26 Jan 2010 03:45:50 +0000 (19:45 -0800)]
usb: musb: hsdma: add wrapper for reading DMA count
Add a wrapper for reading the DMA count register, analogous
to the one for writing to this register.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 26 Jan 2010 03:45:50 +0000 (19:45 -0800)]
USB: musb: Add new fifo table for a OMAP3 errata
We have observed MSC data read corruption when USB LAN device is
also connected and it's interface is up.
Silicon team has confirmed an errata where in all the active
transfers should use FIFO space either in first 8K or next 8K.
So far we have observed the issue in above use case scenario.
As a workaround to it, adding a new FIFO config (5) fitting well
within first 8K which can be used for such use cases.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:45:49 +0000 (19:45 -0800)]
USB: musb: remove some of the never defined defines
just makes the musb init code a bit cleaner.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:45:49 +0000 (19:45 -0800)]
USB: musb: move to sysfs_groups
it's easier to keep up and add more sysfs entries
as necessary.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:45:49 +0000 (19:45 -0800)]
USB: musb: move two printk to dev_err
trivial cleanup, no functional changes.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 26 Jan 2010 03:45:48 +0000 (19:45 -0800)]
USB: musb: use resource_size()
it makes ioremap() usage looks cleaner.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 26 Jan 2010 03:45:48 +0000 (19:45 -0800)]
i2c-omap: Fix reg_shift init
Otherwise register access won't work during probe
for omap_i2c_unidle.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cory Maccarrone [Tue, 26 Jan 2010 03:45:48 +0000 (19:45 -0800)]
Add support for 16-bit registers
The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices. However, OMAP730/850 based
devices use a 16-bit register size.
This change modifies the driver to perform a runtime CPU type check
to determine the register sizes, and uses a bit shift of either 1
or 2 bits to compute the proper register sizes for all registers.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marek Belisko [Tue, 26 Jan 2010 03:45:47 +0000 (19:45 -0800)]
mmc-omap: Add support for 16-bit and 32-bit registers
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver. To resolve
this, a bit shift is performed on base register addresses, either by 1 or 2
bits depending on the CPU in use. This yields the correct registers for
each CPU.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 26 Jan 2010 03:45:47 +0000 (19:45 -0800)]
ehci: fix missing kfree in remove path also
Added missing kfree() in ehci_hcd_omap_remove().
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Tony Lindgren [Tue, 26 Jan 2010 03:45:32 +0000 (19:45 -0800)]
omap: Remove old unused defines for OMAP_32KSYNCT_BASE
Remove old unused defines for OMAP_32KSYNCT_BASE
Signed-off-by: Tony Lindgren <tony@atomide.com>
Uwe Kleine-König [Tue, 26 Jan 2010 03:45:32 +0000 (19:45 -0800)]
omap: define _toggle_gpio_edge_triggering only for OMAP1
The only usage of _toggle_gpio_edge_triggering is in an
CONFIG_ARCH_OMAP1 is defined, too.
This fixes a compiler warning:
arch/arm/plat-omap/gpio.c:758: warning: '_toggle_gpio_edge_triggering' defined but not used
when compiling for ARCH_OMAP2, ARCH_OMAP3 or ARCH_OMAP4.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Tue, 26 Jan 2010 02:56:12 +0000 (18:56 -0800)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (25 commits)
OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer
PM debug: Fix warning when no CONFIG_DEBUG_FS
OMAP3: PM: DSS PM_WKEN to refill DMA
OMAP: timekeeping: time should not stop during suspend
OMAP3: PM: Force write last pad config register into save area
OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get()
OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modules
OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS
OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
OMAP3: Fixed ARM aux ctrl register save/restore
OMAP3: CPUidle: Fixed timer resolution
OMAP3: PM: Remove duplicate code blocks
OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI
OMAP3: PM: Enable system control module autoidle
OMAP3: PM: Ack pending interrupts before entering suspend
omap: Enable GPMC clock in gpmc_init
OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"
OMAP4: clocks: Fix the clksel_rate struct DPLL divs
OMAP4: PRCM: Fix the base address for CHIRONSS reg defines
OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch()
...
Linus Torvalds [Sun, 24 Jan 2010 18:38:07 +0000 (10:38 -0800)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevent: Don't remove broadcast device when cpu is dead
Linus Torvalds [Sun, 24 Jan 2010 18:37:51 +0000 (10:37 -0800)]
Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux:
i2c: imx: call ioremap only after request_mem_region
i2c: mxc: let time to generate stop bit
Linus Torvalds [Sun, 24 Jan 2010 18:31:34 +0000 (10:31 -0800)]
Merge git://git.infradead.org/~dwmw2/mtd-2.6.33
* git://git.infradead.org/~dwmw2/mtd-2.6.33:
mtd: tests: fix read, speed and stress tests on NOR flash
mtd: Really add ARM pismo support
kmsg_dump: Dump on crash_kexec as well
Uwe Kleine-König [Fri, 8 Jan 2010 16:23:17 +0000 (17:23 +0100)]
i2c: imx: call ioremap only after request_mem_region
accordingly adapt order of release_mem_region and release_mem_region on
remove.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Richard Zhao <linuxzsc@gmail.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Valentin Longchamp [Thu, 21 Jan 2010 17:55:32 +0000 (18:55 +0100)]
i2c: mxc: let time to generate stop bit
After generating the stop bit by changing MSTA from 1 to 0,
the i2c_imx->stopped was immediatly set to 1. The second test
on i2c_imx->stopped then is correct and the controller never
waits if the bus is busy. This patch corrects this.
On mx31moboard, stop bit was not generated on single write transfers.
This was kept unnoticed as other transfers are made afterwards that
help the write recipient to resynchronize.
Thanks to Philippe and Michael for the debugging.
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Reported-by: Michael Bonani <michael.bonani@epfl.ch>
Acked-by; Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Tony Lindgren [Fri, 22 Jan 2010 02:36:57 +0000 (18:36 -0800)]
Linux-omap rebuilt: Updated to 2.6.33-rc5
$ git checkout -b tmp-rebuild-
1264127809 linus
$ git merge -m "Merge omap-fixes" omap-fixes
$ git merge -m "Merge omap-testing" omap-testing
$ git merge -m "Merge for-next" for-next
$ git merge -m "Merge cbus" cbus
$ git merge -s ours master
$ git checkout master
$ git merge tmp-rebuild-
1264127809
To view the changes since the last rebuild, please do
$ git diff
0ef74b74ff3ec1d3ae3f54b0833fb0235edf9269..
e6cca94a3251855111d406935bf2347d7ff4e58a arch/arm/*omap*/
Tony Lindgren [Fri, 22 Jan 2010 02:36:52 +0000 (18:36 -0800)]
Merge cbus
Tony Lindgren [Fri, 22 Jan 2010 02:36:51 +0000 (18:36 -0800)]
Merge for-next
Francisco Alecrim [Fri, 22 Jan 2010 02:34:06 +0000 (18:34 -0800)]
fix compile for tahvo-usb.c
drivers/cbus/tahvo-usb.c:138: undefined reference to 'usb_bus_start_enum'
usb_bus_start_enum only exported if USB_OTG enabled
Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Francisco Alecrim [Fri, 22 Jan 2010 02:34:06 +0000 (18:34 -0800)]
n8x0_defconfig: active cbus, retu-wd and omap-wd
It's critical for correct n8x0 operation. Device turn power-off after some
seconds without these options.
Signed-off-by: Francisco Alecrim <alecrim@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Fri, 22 Jan 2010 02:34:06 +0000 (18:34 -0800)]
cbus: add platform_data to pass gpios
also add the platform_data to the related
board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Fri, 22 Jan 2010 02:34:05 +0000 (18:34 -0800)]
cbus: move to platform_driver
also add the platform_device to 770 and n8x0 board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Fri, 22 Jan 2010 02:34:05 +0000 (18:34 -0800)]
cbus: separate into several MODULE_AUTHOR entries
will look cleaner on modinfo.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Fri, 22 Jan 2010 02:34:05 +0000 (18:34 -0800)]
cbus: move EXPORT_SYMBOL close to its exported symbols
while there, also add a missing static to cbus_bus_init().
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Fri, 22 Jan 2010 02:34:05 +0000 (18:34 -0800)]
cbus: switch to kzalloc
change kmalloc() + memset() to kzalloc(), no functional
changes.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Fri, 22 Jan 2010 02:34:04 +0000 (18:34 -0800)]
cbus: tahvo-usb: make it build again
plenty of legacy code sitting there. Make it build
again. Later patches will come to clean that up.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 22 Jan 2010 02:34:04 +0000 (18:34 -0800)]
cbus: Make retu watchdog behave like a standard Linux watchdog
Make retu watchdog behave like a standard Linux watchdog.
Let the kernel do the kicking until the watchdog device is opened.
Note: We should remove the old non-standard interface, please
change to use standard /dev/watchdog instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 22 Jan 2010 02:34:03 +0000 (18:34 -0800)]
cbus: Fix compile and don't try to use tag
Fix compile and don't try to use tag
This should be really passed as platform_data from
the board-*.c files.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 22 Jan 2010 02:34:03 +0000 (18:34 -0800)]
omap: Search and replace headers to use plat
Search and replace headers to use plat
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Fri, 22 Jan 2010 02:34:03 +0000 (18:34 -0800)]
omap: Add drivers/cbus support
CBUS is the bus that Energy Management ASICs are connected to on
some Nokia mobile devices. Added support for CBUS and two EM ASIC
drivers.
This commit is a merge of all the commits that were in the linux-omap
tree:
aae6da6d5f09307b1feb391a47d1ddb6bf2d523e CBUS: Switch to gpio_request/free calls
702e65cebefe0af8ac4a648286f229947f3e1b68 cbus build fixes
f03fdeddbbaafb57f0f62629a316036f270a973d use gpio_to_irq (OMAP tree only)
570f10b7d3aaa3d542b749622df2a1f86e54ebc3 use gpio_direction_output (OMAP tree only)
d59842e6881e8f58cb17de5c0d11866796347d50 use gpio_direction_input (OMAP tree only)
7270f33b7b0139f40fcfbf771dc5ec5a773a71cd use standard gpio get/set calls (OMAP tree only)
f228a725b975832ac5771ab2fc86d06bd694cdb3 ARM: OMAP: Remove io_p2v, use ioremap and XXX_IO_ADDRESS
fdee8764947cde1e6933e7d981ce5b9de00e83e6 Merge current mainline tree into linux-omap tree
5061bcd119547453b32c847d2b9490a052bc1755 Merge mainline v2.6.27-rc2 tree into linux-omap tree
2d46b9c984d1c862f2525b4d0cabcb092f77ac64 CBUS: A workaround for ADC S/H HW bug: always keep ch 8 selected when S/H is used
648f41f57c2bfa7152f0760ca29a1e9dac566ca4 USB: Change omap USB code to use omap_read/write instead of __REG for multi-omap
d305c615bb7f85d49788a4ed28cb6aace2317ab7 ARM: OMAP: Misc compile fixes
bfbd53fcc738ff33ebcf91bc3ef25ae637cc4175 CBUS: Checkpatch.pl fixes for retu-wdt.c
2d28be5848928fbb17952e8eb5295fb506e0c40e CBUS: Fix retu mutex handling
7faa6dd4ae4db44f9c3142484266e17080314d79 CBUS: Fix retu-headset driver by not using removed input_dev->private field
8964c7d13133723ef2fe6a2b798a3fd336b15f4e ARM: OMAP: Add return value check for input_register_device()
2cf7bc8a039d6a6b4558c8c3a319ea15eccab60c CBUS: Fix retu-headset driver by not using removed input_dev->cdev field
97b705ad835f1481270c4b67b402d6e37fa8ad15 ARM: OMAP: Misc compile fixes after syncing with mainline
488de021a75771df95473c85bfaa9c8f1c9db659 tahvo-usb: compile fix usb/gadget.h
d079a1c74ea46f75cc406838c45652b97205e6be CBUS: Do not BUG_ON in retu-headset in case of spurious release event
074e3419440ba83e659be554f827e928826b512d CBUS: Fix reentrant issues in retu-headset driver
9afd4b705891e8afd505ecabec25539b22416d7a CBUS: Manage bias voltage in retu-headset suspend/resume code
0de1ae4b1cee28514dec435bf58c4b5960dfb4e1 CBUS: Cleanup retu-headset driver
dff99b718dffb5c041c99eebb3607f411d377f4d ARM: OMAP: Misc compile fixes after updating to current mainline tree
e0f2c271e0e3feaab8f8190b39876683099d3f6a ARM: OMAP: Fix inconsistency of completion in retu-rtc
6cda72c73944cc50250b3ae959174b6778d5e19f ARM: OMAP: Fix USB compilation for N770 defconfig
d041f80e997ff7c21b14fdee920a034e576aa226 CBUS: Add driver for Retu/Vilma headset detection
699d8412c1bf505f24d1a2048b49b8ffd8fe1d00 ARM: OMAP: Clean up bitrot to sync with mainline
ba9ca80b6468c5500a84a5c5e84383a6925a0bc3 ARM: OMAP: Convert driver interrupt flags SA_* to IRQF_*
7adeaaa4390dff8dcd4e44e6bcb144befcc2816f ARM: OMAP: Workqueue changes for retu-rtc
708739a058a59b76f72062bda81fb961e05d61e8 ARM: OMAP: Workqueue changes for tahvo-usb
995dda5fa21c77d337fa2fc07914ecb15cd08e54 ARM: OMAP: Fix warnings in N770 build
e2f0b012fd0fc16899dcdabc0b43fabdfdadcd8c ARM: OMAP: Fix broken N770 build (tahvo-usb)
d5c772f519236d8683b460e5da37f4a943ca4aae Fix some pt_regs users
229b59cdb41742aa4aee3628962af6ef2c4d944a Sync with mainline: Get rid of unnecessary pt_regs
b983452be56be4169233c34be1134e8030be674b Sync with mainline: Get rid of <#include linux/config.h>
77845293a4eb6cfea806ecc74ea9988c044a76bc CBUS: Retu: add atomic set and clear register bits function
d2db44bd92af99576cdf976f7dfc95f54884b14d CBUS: Tahvo: add atomic set and clear register bits function
e19cba0ecf9dd2d9adfdba175e335aebe973023a CBUS: Enable suspend wakeup for Retu IRQ
8c81aa40bea255769f13449dfb7699552ddb8438 Merge source.mvista.com:/home/git/linux-omap-2.6
1230366a669d16c7a292586adc7ab0725395f5b4 Manual merge to make things compile after updating to 2.6.18-rc4
6b411907432fe97bce3e6a253f6b98ab6c105efc CBUS: turn off tahvo-usb OTG idle mode during enabling
e3b2a7b6c6bcb4d6e839695fdac3e23b86046f98 CBUS: Make Retu RTC and Tahvo USB drivers use sysfs_notify
fe3702054f6412aea04373ceb9d27a4a417ff3f0 OMAP: Fix USB on Nokia 770
9c926661738080ee298bc3a51240dd102973fa61 [PATCH] ARM: OMAP: tahvo_user: sem2mutex conversion
ea90ef431139e4ac40b1d08726f45283f98d50ef [PATCH] ARM: OMAP: tahvo usb: sem2mutex conversion
06563a863d399ab6a3a5c104ddf086030f33b6f6 [PATCH] ARM: OMAP: retu-user: sem2mutex conversion
72a222f41989a4b8ad8cddf62c47608ad2e9e358 [PATCH] ARM: OMAP: retu-rtc: sem2mutex conversion
7508d984603f5ce3cb6883c229c97ed0a35d24c6 [PATCH] CBUS: Fix tahvo-usb omap_otg_remove
07f4f04763e2ff4333d44bec438d4bacbea0b4ae CBUS: Convert Retu power button driver to use input_allocate_device()
c604ff0bb1bbd3c6bf14bb9e5cae67c5a89e4ece cbus: Update tahvo-usb for kernel API changes.
f5c9432bb9bd44968cb785e3bb8aad95d6af3431 [PATCH] ARM: OMAP: gpio-switch and retu-rtc kobject_uevent() fixes
517df76f9295ac1865494476e8b531c65232dc5a ARM: OMAP: Replace clock.h with clk.h
93cb1e87df6ac03d315c0408634831e7db898a77 ARM: OMAP: Support for new Retu chips
480a299b3f3a5302f068fb7e3c68069ab3d355a5 ARM: OMAP: Support for 7-bit backlight register on new Tahvo chips
19deb6846965d9fdd5a87cae3593a953ccfea778 ARM: OMAP: Add CBUS support
Roel Kluin [Tue, 19 Jan 2010 13:14:15 +0000 (13:14 +0000)]
USB: musb: don't dereference NULL tusb_dma indma_controller_destroy()
Test whether tusb_dma is not NULL before dereferencing
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 19 Jan 2010 13:14:14 +0000 (13:14 +0000)]
usb: host: ehci: adding regulator framework in ehci-omap.cdriver
OMAP3 has three HS USB ports so it can have three different regulator
for each PHY connected to each port.
Currently these regulators are assumed to be optional and driver doesn't
fail but continue with the initialization if it doesn't get any regulators.
Regulator supply names has to be mapped in board files as 'hsusbN' where
'N' is port number and can be {0, 1 ,2}.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 19 Jan 2010 13:14:13 +0000 (13:14 +0000)]
usb: host: ehci: fix missing kfree in remove path also
Added missing kfree() in ehci_hcd_omap_remove().
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 19 Jan 2010 13:14:12 +0000 (13:14 +0000)]
usb: musb: Add 'extvbus' in musb_hdrc_platform_data
Some of the board might use external Vbus power supply on musb
interface which would require to program ULPI_BUSCONTROL register.
Adding 'extvbus' flag which can be set from such boards which will
be checked at musb driver files before programming ULPI_BUSCONTROL.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 19 Jan 2010 13:14:11 +0000 (13:14 +0000)]
usb: musb: save dynfifo in musb struct
Save dynamic FIFO read only information for later uses during
musb_save/restore_context functions.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnaud Mandy [Tue, 19 Jan 2010 13:14:10 +0000 (13:14 +0000)]
usb: musb: handle irqs in the order dictated by programmingguide
MUSB's programming guide dictates how we should handle its
irqs and in which order. Follow that.
Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Bryan Wu [Tue, 19 Jan 2010 13:14:09 +0000 (13:14 +0000)]
usb: musb: clean up commit 'workaround Blackfin FIFO anomalies'
The version applied had a few comments which are now
done.
Thanks to Sergei for pointing out.
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Swaminathan S [Tue, 19 Jan 2010 13:14:08 +0000 (13:14 +0000)]
usb: musb: Fix cppi_channel_abort() function to handle Txabort correctly
This patch fixes the Tx abort/teardown logic. We now wait for the teardown
completion interrupt and acknowledge the same by setting the tx_complete
register to 0.
This change is needed to ensure that abort processing works on DM365 platform.
Without this change after completion of abort processing the system is
overwhelmed with continuous stream of abort interrupts.
This change has been tested on all CPPI3.x platforms (DM644x, DM646x, DM35x,
DM36x).
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Swaminathan S [Tue, 19 Jan 2010 13:14:07 +0000 (13:14 +0000)]
usb: musb: workaround toggle bug when doing bulk transferafter isoc
This patch implements the work around for a Mentor controller related
bug where it's observed a BULK Tx toggle error on the bus when a
BULK IO gets scheduled on an endpoint that was earlier used for
handling ISOC transaction and needed to start on 1 toggle. When such
a situation arises even if the TXCSR toggle bits are programmed
correctly by the musb driver the data gets transmitted with 0 toggle
which leads to toggle error on the bus and the BULK transaction fails.
In case of MSC write, the device gets reset by the Host.
This Mentor bug is observed on almost all Mentor versions (1.3, 1.5,
1.8). Confirmed on DM644x, DM355, DM365, OMAPL13x platforms.
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Anand Gadiyar [Tue, 19 Jan 2010 13:14:06 +0000 (13:14 +0000)]
[PATCH/USB,
MUSB DMA_INTR register may sometimes read zero when infact there
was a pending interrupt. Workaround this by reading the DMA_COUNT
values for all enabled channels when this condition occurs.
Flag these channels as the ones needing to be serviced.
Additionally, the absence of a debug print meant we would never
catch a spurious DMA interrupt in MUSB. So this patch adds a
debug print in the IRQ handler.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Anand Gadiyar [Tue, 19 Jan 2010 13:14:05 +0000 (13:14 +0000)]
usb: musb: hsdma: add wrapper for reading DMA count
Add a wrapper for reading the DMA count register, analogous
to the one for writing to this register.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Tue, 19 Jan 2010 13:14:04 +0000 (13:14 +0000)]
USB: musb: Add new fifo table for a OMAP3 errata
We have observed MSC data read corruption when USB LAN device is
also connected and it's interface is up.
Silicon team has confirmed an errata where in all the active
transfers should use FIFO space either in first 8K or next 8K.
So far we have observed the issue in above use case scenario.
As a workaround to it, adding a new FIFO config (5) fitting well
within first 8K which can be used for such use cases.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 19 Jan 2010 13:14:03 +0000 (13:14 +0000)]
USB: musb: remove some of the never defined defines
just makes the musb init code a bit cleaner.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 19 Jan 2010 13:14:02 +0000 (13:14 +0000)]
USB: musb: move to sysfs_groups
it's easier to keep up and add more sysfs entries
as necessary.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 19 Jan 2010 13:14:01 +0000 (13:14 +0000)]
USB: musb: move two printk to dev_err
trivial cleanup, no functional changes.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 19 Jan 2010 13:14:00 +0000 (13:14 +0000)]
USB: musb: use resource_size()
it makes ioremap() usage looks cleaner.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 22 Jan 2010 02:31:46 +0000 (18:31 -0800)]
i2c-omap: Fix reg_shift init
Otherwise register access won't work during probe
for omap_i2c_unidle.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cory Maccarrone [Fri, 22 Jan 2010 02:31:46 +0000 (18:31 -0800)]
Add support for 16-bit registers
The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices. However, OMAP730/850 based
devices use a 16-bit register size.
This change modifies the driver to perform a runtime CPU type check
to determine the register sizes, and uses a bit shift of either 1
or 2 bits to compute the proper register sizes for all registers.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marek Belisko [Fri, 22 Jan 2010 02:31:46 +0000 (18:31 -0800)]
mmc-omap: Add support for 16-bit and 32-bit registers
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver. To resolve
this, a bit shift is performed on base register addresses, either by 1 or 2
bits depending on the CPU in use. This yields the correct registers for
each CPU.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Fri, 22 Jan 2010 02:31:45 +0000 (18:31 -0800)]
ehci: fix missing kfree in remove path also
Added missing kfree() in ehci_hcd_omap_remove().
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
vikram pandita [Fri, 22 Jan 2010 02:31:42 +0000 (18:31 -0800)]
omap: zoom3: enable ehci support
Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy.
GPIO_64 is connected to the PHY reset pin.
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Gadiyar, Anand <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
vikram pandita [Fri, 22 Jan 2010 02:31:42 +0000 (18:31 -0800)]
omap: serial: fix coding style indentaion
No logical code change
Fix coding style indentaion as per checkpatch.pl
Fix multi-line comment style reported by Nishanth Menon
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Menon, Nishanth <nm@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lesly A M [Fri, 22 Jan 2010 02:31:41 +0000 (18:31 -0800)]
omap3: pm: Add T2 Keypad as a wakeup source
Changes for setting the padconf value for sys_nirq line which is
connected to T2 INTR1. This will fix the T2 keypad wakeup.
Signed-off-by: Lesly A M <x0080970@ti.com>
Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sriram [Fri, 22 Jan 2010 02:31:41 +0000 (18:31 -0800)]
ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
OMAP platforms(like OMAP3530) include DSP or other co-processors
for media acceleration. when carving out memory for the
accelerators we can end up creating a hole in the memory map
of sort:
<kernel memory><hole(memory for accelerator)><kernel memory>
To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL
has to be enabled. For further information refer discussion at:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html.
Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 22 Jan 2010 02:31:41 +0000 (18:31 -0800)]
omap: Clean-up for omap_mux_init
Get rid of the ifdeffery in omap_mux_init by creating
omap_mux_init_package and omap_mux_init_signals functions.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Fri, 22 Jan 2010 02:31:40 +0000 (18:31 -0800)]
MTD: remove no longer used OMAP flash map
All OMAP boards are now using physmap-flash.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Fri, 22 Jan 2010 02:31:40 +0000 (18:31 -0800)]
omap: convert boards to use physmap-flash
Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 23 Oct 2009 16:03:47 +0000 (19:03 +0300)]
OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer
OMAP GP timers keep running for a few cycles after they are stopped,
which can cause the timer to expire and generate an interrupt. The
pending interrupt will prevent e.g. OMAP from entering suspend, thus
we ack it manually. Only applicable on OMAP2/3/4.
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Fri, 22 Jan 2010 01:33:23 +0000 (17:33 -0800)]
Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
hmt: adjust for new pwm_backlight->notify prototype
Peter Korsgaard [Thu, 21 Jan 2010 21:56:58 +0000 (22:56 +0100)]
hmt: adjust for new pwm_backlight->notify prototype
Commit
cfc38999f (backlight: Pass device through notify callback)
added a struct device argument to the notify callback, but didn't
update the user of it in mach-hmt.c
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Torvalds [Thu, 21 Jan 2010 23:31:35 +0000 (15:31 -0800)]
Linux 2.6.33-rc5
Linus Torvalds [Thu, 21 Jan 2010 16:50:04 +0000 (08:50 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: x86: Add support for the ANY bit
perf: Change the is_software_event() definition
perf: Honour event state for aux stream data
perf: Fix perf_event_do_pending() fallback callsite
perf kmem: Print usage help for unknown commands
perf kmem: Increase "Hit" column length
hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change
perf timechart: Use tid not pid for COMM change
Linus Torvalds [Thu, 21 Jan 2010 16:49:52 +0000 (08:49 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Reassign prev and switch_count when reacquire_kernel_lock() fail
sched: Fix vmark regression on big machines
Linus Torvalds [Thu, 21 Jan 2010 15:42:59 +0000 (07:42 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: retry FS IOs even if it has failed with AC_ERR_INVALID
git.openpandora.org / pandora-kernel.git / log