config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
Enable this to add support for the PHY part present in the control
module. This driver has API to power on the USB2 PHY and to write to
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o
-obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
class_dev_iter_init(&iter, phy_class, NULL, NULL);
while ((dev = class_dev_iter_next(&iter))) {
phy = to_phy(dev);
+
+ if (!phy->init_data)
+ continue;
count = phy->init_data->num_consumers;
consumers = phy->init_data->consumers;
while (count--) {
}
}
+/**
+ * ci_usb_phy_init: initialize phy according to different phy type
+ * @ci: the controller
+ *
+ * This function returns an error code if usb_phy_init has failed
+ */
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+ int ret;
+
+ switch (ci->platdata->phy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ case USBPHY_INTERFACE_MODE_HSIC:
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ hw_phymode_configure(ci);
+ break;
+ case USBPHY_INTERFACE_MODE_ULPI:
+ case USBPHY_INTERFACE_MODE_SERIAL:
+ hw_phymode_configure(ci);
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ break;
+ default:
+ ret = usb_phy_init(ci->transceiver);
+ }
+
+ return ret;
+}
+
/**
* hw_device_reset: resets chip (execute without interruption)
* @ci: the controller
return -ENODEV;
}
- hw_phymode_configure(ci);
-
if (ci->platdata->phy)
ci->transceiver = ci->platdata->phy;
else
return -EPROBE_DEFER;
}
- ret = usb_phy_init(ci->transceiver);
+ ret = ci_usb_phy_init(ci);
if (ret) {
dev_err(dev, "unable to init phy: %d\n", ret);
return ret;
spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_event_buffers_setup(dwc);
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
case USB_DR_MODE_OTG:
/* FALLTHROUGH */
case USB_DR_MODE_HOST:
default:
- dwc3_event_buffers_setup(dwc);
break;
}
* improve this algorithm so that we better use the internal
* FIFO space
*/
- for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
- struct dwc3_ep *dep = dwc->eps[num];
- int fifo_number = dep->number >> 1;
+ for (num = 0; num < dwc->num_in_eps; num++) {
+ /* bit0 indicates direction; 1 means IN ep */
+ struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
int mult = 1;
int tmp;
- if (!(dep->number & 1))
- continue;
-
if (!(dep->flags & DWC3_EP_ENABLED))
continue;
dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
dep->name, last_fifo_depth, fifo_size & 0xffff);
- dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
- fifo_size);
+ dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
last_fifo_depth += (fifo_size & 0xffff);
}
*/
struct usb_gadget *gadget = epfile->ffs->gadget;
+ spin_lock_irq(&epfile->ffs->eps_lock);
+ /* In the meantime, endpoint got disabled or changed. */
+ if (epfile->ep != ep) {
+ spin_unlock_irq(&epfile->ffs->eps_lock);
+ return -ESHUTDOWN;
+ }
/*
* Controller may require buffer size to be aligned to
* maxpacketsize of an out endpoint.
data_len = io_data->read ?
usb_ep_align_maybe(gadget, ep->ep, io_data->len) :
io_data->len;
+ spin_unlock_irq(&epfile->ffs->eps_lock);
data = kmalloc(data_len, GFP_KERNEL);
if (unlikely(!data))
if (skb2)
rndis_add_hdr(skb2);
- dev_kfree_skb_any(skb);
+ dev_kfree_skb(skb);
return skb2;
}
struct fsl_udc *udc;
udc = container_of(gadget, struct fsl_udc, gadget);
+
+ if (!udc->vbus_active)
+ return -EOPNOTSUPP;
+
udc->softconnect = (is_on != 0);
if (can_pullup(udc))
fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
if (!udc_controller)
return -ENODEV;
- usb_del_gadget_udc(&udc_controller->gadget);
udc_controller->done = &done;
+ usb_del_gadget_udc(&udc_controller->gadget);
fsl_udc_clk_release();
return -ESRCH;
/* fake probe to determine $CHIP */
+ CHIP = NULL;
usb_gadget_probe_driver(&probe_driver);
if (!CHIP)
return -ENODEV;
#include <asm/byteorder.h>
#include <asm/unaligned.h>
+#include "u_rndis.h"
#undef VERBOSE_DEBUG
#define UETH__VERSION "29-May-2008"
-#define GETHER_NAPI_WEIGHT 32
-
struct eth_dev {
/* lock is held while accessing port_usb
*/
struct sk_buff_head *list);
struct work_struct work;
- struct napi_struct rx_napi;
unsigned long todo;
#define WORK_RX_MEMORY 0
DBG(dev, "rx submit --> %d\n", retval);
if (skb)
dev_kfree_skb_any(skb);
+ spin_lock_irqsave(&dev->req_lock, flags);
+ list_add(&req->list, &dev->rx_reqs);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
}
return retval;
}
static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct sk_buff *skb = req->context;
+ struct sk_buff *skb = req->context, *skb2;
struct eth_dev *dev = ep->driver_data;
int status = req->status;
- bool rx_queue = 0;
switch (status) {
} else {
skb_queue_tail(&dev->rx_frames, skb);
}
- if (!status)
- rx_queue = 1;
+ skb = NULL;
+
+ skb2 = skb_dequeue(&dev->rx_frames);
+ while (skb2) {
+ if (status < 0
+ || ETH_HLEN > skb2->len
+ || skb2->len > VLAN_ETH_FRAME_LEN) {
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_length_errors++;
+ DBG(dev, "rx length %d\n", skb2->len);
+ dev_kfree_skb_any(skb2);
+ goto next_frame;
+ }
+ skb2->protocol = eth_type_trans(skb2, dev->net);
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += skb2->len;
+
+ /* no buffer copies needed, unless hardware can't
+ * use skb buffers.
+ */
+ status = netif_rx(skb2);
+next_frame:
+ skb2 = skb_dequeue(&dev->rx_frames);
+ }
break;
/* software-driven interface shutdown */
/* FALLTHROUGH */
default:
- rx_queue = 1;
- dev_kfree_skb_any(skb);
dev->net->stats.rx_errors++;
DBG(dev, "rx status %d\n", status);
break;
}
+ if (skb)
+ dev_kfree_skb_any(skb);
+ if (!netif_running(dev->net)) {
clean:
spin_lock(&dev->req_lock);
list_add(&req->list, &dev->rx_reqs);
spin_unlock(&dev->req_lock);
-
- if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi)))
- __napi_schedule(&dev->rx_napi);
+ req = NULL;
+ }
+ if (req)
+ rx_submit(dev, req, GFP_ATOMIC);
}
static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
{
struct usb_request *req;
unsigned long flags;
- int rx_counts = 0;
/* fill unused rxq slots with some skb */
spin_lock_irqsave(&dev->req_lock, flags);
while (!list_empty(&dev->rx_reqs)) {
-
- if (++rx_counts > qlen(dev->gadget, dev->qmult))
- break;
-
req = container_of(dev->rx_reqs.next,
struct usb_request, list);
list_del_init(&req->list);
spin_unlock_irqrestore(&dev->req_lock, flags);
if (rx_submit(dev, req, gfp_flags) < 0) {
- spin_lock_irqsave(&dev->req_lock, flags);
- list_add(&req->list, &dev->rx_reqs);
- spin_unlock_irqrestore(&dev->req_lock, flags);
defer_kevent(dev, WORK_RX_MEMORY);
return;
}
spin_unlock_irqrestore(&dev->req_lock, flags);
}
-static int gether_poll(struct napi_struct *napi, int budget)
-{
- struct eth_dev *dev = container_of(napi, struct eth_dev, rx_napi);
- struct sk_buff *skb;
- unsigned int work_done = 0;
- int status = 0;
-
- while ((skb = skb_dequeue(&dev->rx_frames))) {
- if (status < 0
- || ETH_HLEN > skb->len
- || skb->len > VLAN_ETH_FRAME_LEN) {
- dev->net->stats.rx_errors++;
- dev->net->stats.rx_length_errors++;
- DBG(dev, "rx length %d\n", skb->len);
- dev_kfree_skb_any(skb);
- continue;
- }
- skb->protocol = eth_type_trans(skb, dev->net);
- dev->net->stats.rx_packets++;
- dev->net->stats.rx_bytes += skb->len;
-
- status = netif_rx_ni(skb);
- }
-
- if (netif_running(dev->net)) {
- rx_fill(dev, GFP_KERNEL);
- work_done++;
- }
-
- if (work_done < budget)
- napi_complete(&dev->rx_napi);
-
- return work_done;
-}
-
static void eth_work(struct work_struct *work)
{
struct eth_dev *dev = container_of(work, struct eth_dev, work);
/* and open the tx floodgates */
atomic_set(&dev->tx_qlen, 0);
netif_wake_queue(dev->net);
- napi_enable(&dev->rx_napi);
}
static int eth_open(struct net_device *net)
unsigned long flags;
VDBG(dev, "%s\n", __func__);
- napi_disable(&dev->rx_napi);
netif_stop_queue(net);
DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
- netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
- netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
- struct sk_buff *skb;
WARN_ON(!dev);
if (!dev)
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
-
- spin_lock(&dev->rx_frames.lock);
- while ((skb = __skb_dequeue(&dev->rx_frames)))
- dev_kfree_skb_any(skb);
- spin_unlock(&dev->rx_frames.lock);
-
link->in_ep->driver_data = NULL;
link->in_ep->desc = NULL;
ss_opts->isoc_interval = gzero_options.isoc_interval;
ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
ss_opts->isoc_mult = gzero_options.isoc_mult;
- ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket;
+ ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
ss_opts->bulk_buflen = gzero_options.bulk_buflen;
func_ss = usb_get_function(func_inst_ss);
*/
if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+
+ xhci->quirks |= XHCI_SPURIOUS_REBOOT;
}
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
- pdev->device == 0x0015 &&
- pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
- pdev->subsystem_device == 0xc0cd)
+ pdev->device == 0x0015)
xhci->quirks |= XHCI_RESET_ON_RESUME;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
struct xhci_ring *ep_ring;
struct xhci_generic_trb *trb;
dma_addr_t addr;
+ u64 hw_dequeue;
ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
ep_index, stream_id);
stream_id);
return;
}
- state->new_cycle_state = 0;
- xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
- "Finding segment containing stopped TRB.");
- state->new_deq_seg = find_trb_seg(cur_td->start_seg,
- dev->eps[ep_index].stopped_trb,
- &state->new_cycle_state);
- if (!state->new_deq_seg) {
- WARN_ON(1);
- return;
- }
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
if (ep->ep_state & EP_HAS_STREAMS) {
struct xhci_stream_ctx *ctx =
&ep->stream_info->stream_ctx_array[stream_id];
- state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring);
+ hw_dequeue = le64_to_cpu(ctx->stream_ring);
} else {
struct xhci_ep_ctx *ep_ctx
= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
- state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+ hw_dequeue = le64_to_cpu(ep_ctx->deq);
}
+ /* Find virtual address and segment of hardware dequeue pointer */
+ state->new_deq_seg = ep_ring->deq_seg;
+ state->new_deq_ptr = ep_ring->dequeue;
+ while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
+ != (dma_addr_t)(hw_dequeue & ~0xf)) {
+ next_trb(xhci, ep_ring, &state->new_deq_seg,
+ &state->new_deq_ptr);
+ if (state->new_deq_ptr == ep_ring->dequeue) {
+ WARN_ON(1);
+ return;
+ }
+ }
+ /*
+ * Find cycle state for last_trb, starting at old cycle state of
+ * hw_dequeue. If there is only one segment ring, find_trb_seg() will
+ * return immediately and cannot toggle the cycle state if this search
+ * wraps around, so add one more toggle manually in that case.
+ */
+ state->new_cycle_state = hw_dequeue & 0x1;
+ if (ep_ring->first_seg == ep_ring->first_seg->next &&
+ cur_td->last_trb < state->new_deq_ptr)
+ state->new_cycle_state ^= 0x1;
+
state->new_deq_ptr = cur_td->last_trb;
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding segment containing last TRB in TD.");
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
- state->new_deq_ptr,
- &state->new_cycle_state);
+ state->new_deq_ptr, &state->new_cycle_state);
if (!state->new_deq_seg) {
WARN_ON(1);
return;
}
+ /* Increment to find next TRB after last_trb. Cycle if appropriate. */
trb = &state->new_deq_ptr->generic;
if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
(trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
state->new_cycle_state ^= 0x1;
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
- /*
- * If there is only one segment in a ring, find_trb_seg()'s while loop
- * will not run, and it will return before it has a chance to see if it
- * needs to toggle the cycle bit. It can't tell if the stalled transfer
- * ended just before the link TRB on a one-segment ring, or if the TD
- * wrapped around the top of the ring, because it doesn't have the TD in
- * question. Look for the one-segment case where stalled TRB's address
- * is greater than the new dequeue pointer address.
- */
- if (ep_ring->first_seg == ep_ring->first_seg->next &&
- state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
- state->new_cycle_state ^= 0x1;
+ /* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
- /* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"New dequeue segment = %p (virtual)",
state->new_deq_seg);
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
- /* Clear stopped_td and stopped_trb if endpoint is not halted */
- if (!(ep->ep_state & EP_HALTED)) {
+ /* Clear stopped_td if endpoint is not halted */
+ if (!(ep->ep_state & EP_HALTED))
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
- }
/*
* Drop the lock and complete the URBs in the cancelled TD list.
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
ep->ep_state |= EP_HALTED;
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
ep->stopped_stream = stream_id;
xhci_queue_reset_ep(xhci, slot_id, ep_index);
xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
ep->stopped_stream = 0;
xhci_ring_cmd_db(xhci);
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
return 0;
} else {
if (trb_comp_code == COMP_STALL) {
* USB class driver clear the stall later.
*/
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
ep->stopped_stream = ep_ring->stream_id;
} else if (xhci_requires_manual_halt_cleanup(xhci,
ep_ctx, trb_comp_code)) {
#else
-static int xhci_try_enable_msi(struct usb_hcd *hcd)
+static inline int xhci_try_enable_msi(struct usb_hcd *hcd)
{
return 0;
}
-static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+static inline void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
}
-static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
{
}
xhci_ring_cmd_db(xhci);
}
virt_ep->stopped_td = NULL;
- virt_ep->stopped_trb = NULL;
virt_ep->stopped_stream = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
#define EP_GETTING_NO_STREAMS (1 << 5)
/* ---- Related to URB cancellation ---- */
struct list_head cancelled_td_list;
- /* The TRB that was last reported in a stopped endpoint ring */
- union xhci_trb *stopped_trb;
struct xhci_td *stopped_td;
unsigned int stopped_stream;
/* Watchdog timer for stop endpoint command to cancel URBs */
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
del_timer_sync(&glue->timer);
-
usb_phy_shutdown(musb->xceiv);
+ debugfs_remove_recursive(glue->dbgfs_root);
+
return 0;
}
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- debugfs_remove_recursive(glue->dbgfs_root);
-
return 0;
}
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
+ struct musb *musb = glue_to_musb(glue);
+ struct device *dev = musb->controller;
+
+ pm_runtime_get_sync(dev);
omap_musb_set_mailbox(glue);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
omap_musb_set_mailbox(glue);
phy_init(musb->phy);
+ phy_power_on(musb->phy);
pm_runtime_put_noidle(musb->controller);
return 0;
del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
+ phy_power_off(musb->phy);
phy_exit(musb->phy);
return 0;
#include <linux/err.h>
#include <linux/of.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include "am35x-phy-control.h"
struct am335x_control_usb {
}
writel(val, usb_ctrl->phy_reg + reg);
+
+ /*
+ * Give the PHY ~1ms to complete the power up operation.
+ * Tests have shown unstable behaviour if other USB PHY related
+ * registers are written too shortly after such a transition.
+ */
+ if (on)
+ mdelay(1);
}
static const struct phy_control ctrl_am335x = {
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_debug("PHY: unable to find transceiver of type %s\n",
usb_phy_type_string(type));
+ if (!IS_ERR(phy))
+ phy = ERR_PTR(-ENODEV);
+
goto err0;
}
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/serial.h>
+#include <linux/swab.h>
#include <linux/kfifo.h>
#include <linux/ioctl.h>
#include <linux/firmware.h>
{
int status = 0;
__u8 read_length;
- __be16 be_start_address;
+ u16 be_start_address;
dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
if (read_length > 1) {
dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
}
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * NOTE: Must use swab as wIndex is sent in little-endian
+ * byte order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vread_sync(dev, UMPC_MEMORY_READ,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, read_length);
if (status) {
struct device *dev = &serial->serial->dev->dev;
int status = 0;
int write_length;
- __be16 be_start_address;
+ u16 be_start_address;
/* We can only send a maximum of 1 aligned byte page at a time */
__func__, start_address, write_length);
usb_serial_debug_data(dev, __func__, write_length, buffer);
- /* Write first page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write first page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte order
+ * regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev,
UMPC_MEMORY_WRITE, (__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
__func__, start_address, write_length);
usb_serial_debug_data(dev, __func__, write_length, buffer);
- /* Write next page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write next page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte
+ * order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_err(dev, "%s - ERROR %d\n", __func__, status);
if (rom_desc->Type == desc_type)
return start_address;
- start_address = start_address + sizeof(struct ti_i2c_desc)
- + rom_desc->Size;
+ start_address = start_address + sizeof(struct ti_i2c_desc) +
+ le16_to_cpu(rom_desc->Size);
} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
__u16 i;
__u8 cs = 0;
- for (i = 0; i < rom_desc->Size; i++)
+ for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
cs = (__u8)(cs + buffer[i]);
if (cs != rom_desc->CheckSum) {
break;
if ((start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size) > TI_MAX_I2C_SIZE) {
+ le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
break;
/* Read the descriptor data */
status = read_rom(serial, start_address +
sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size),
+ buffer);
if (status)
break;
break;
}
start_address = start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size;
+ le16_to_cpu(rom_desc->Size);
} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
(start_address < TI_MAX_I2C_SIZE));
/* Read the descriptor data */
status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size), buffer);
if (status)
goto exit;
#define QUALCOMM_VENDOR_ID 0x05C6
#define CMOTECH_VENDOR_ID 0x16d8
-#define CMOTECH_PRODUCT_6008 0x6008
-#define CMOTECH_PRODUCT_6280 0x6280
+#define CMOTECH_PRODUCT_6001 0x6001
+#define CMOTECH_PRODUCT_CMU_300 0x6002
+#define CMOTECH_PRODUCT_6003 0x6003
+#define CMOTECH_PRODUCT_6004 0x6004
+#define CMOTECH_PRODUCT_6005 0x6005
+#define CMOTECH_PRODUCT_CGU_628A 0x6006
+#define CMOTECH_PRODUCT_CHE_628S 0x6007
+#define CMOTECH_PRODUCT_CMU_301 0x6008
+#define CMOTECH_PRODUCT_CHU_628 0x6280
+#define CMOTECH_PRODUCT_CHU_628S 0x6281
+#define CMOTECH_PRODUCT_CDU_680 0x6803
+#define CMOTECH_PRODUCT_CDU_685A 0x6804
+#define CMOTECH_PRODUCT_CHU_720S 0x7001
+#define CMOTECH_PRODUCT_7002 0x7002
+#define CMOTECH_PRODUCT_CHU_629K 0x7003
+#define CMOTECH_PRODUCT_7004 0x7004
+#define CMOTECH_PRODUCT_7005 0x7005
+#define CMOTECH_PRODUCT_CGU_629 0x7006
+#define CMOTECH_PRODUCT_CHU_629S 0x700a
+#define CMOTECH_PRODUCT_CHU_720I 0x7211
+#define CMOTECH_PRODUCT_7212 0x7212
+#define CMOTECH_PRODUCT_7213 0x7213
+#define CMOTECH_PRODUCT_7251 0x7251
+#define CMOTECH_PRODUCT_7252 0x7252
+#define CMOTECH_PRODUCT_7253 0x7253
#define TELIT_VENDOR_ID 0x1bc7
#define TELIT_PRODUCT_UC864E 0x1003
#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define ALCATEL_PRODUCT_X220_X500D 0x0017
#define ALCATEL_PRODUCT_L100V 0x011e
+#define ALCATEL_PRODUCT_L800MA 0x0203
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
#define OLIVETTI_PRODUCT_OLICARD100 0xc000
#define OLIVETTI_PRODUCT_OLICARD145 0xc003
#define OLIVETTI_PRODUCT_OLICARD200 0xc005
+#define OLIVETTI_PRODUCT_OLICARD500 0xc00b
/* Celot products */
#define CELOT_VENDOR_ID 0x211f
.reserved = BIT(1) | BIT(2),
};
+static const struct option_blacklist_info net_intf0_blacklist = {
+ .reserved = BIT(0),
+};
+
static const struct option_blacklist_info net_intf1_blacklist = {
.reserved = BIT(1),
};
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
- { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
- { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
.driver_info = (kernel_ulong_t)&net_intf6_blacklist
},
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist
+ },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)}, /* Sierra Wireless MC7710 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)}, /* Sierra Wireless MC7710 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)}, /* Sierra Wireless MC7710 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 0)}, /* Sierra Wireless MC73xx Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 2)}, /* Sierra Wireless MC73xx NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 3)}, /* Sierra Wireless MC73xx Modem */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)}, /* Sierra Wireless EM7355 Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)}, /* Sierra Wireless EM7355 NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)}, /* Sierra Wireless EM7355 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 0)}, /* Sierra Wireless MC7305/MC7355 Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 2)}, /* Sierra Wireless MC7305/MC7355 NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 3)}, /* Sierra Wireless MC7305/MC7355 Modem */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */
static void usb_serial_deregister(struct usb_serial_driver *device)
{
pr_info("USB Serial deregistering driver %s\n", device->description);
+
mutex_lock(&table_lock);
list_del(&device->driver_list);
- usb_serial_bus_deregister(device);
mutex_unlock(&table_lock);
+
+ usb_serial_bus_deregister(device);
}
/**
if (chid)
result = uwb_radio_start(&wusbhc->pal);
- else
+ else if (wusbhc->uwb_rc)
uwb_radio_stop(&wusbhc->pal);
return result;
done) {
dev_info(dev, "Control EP stall. Queue delayed work.\n");
- spin_lock_irq(&wa->xfer_list_lock);
+ spin_lock(&wa->xfer_list_lock);
/* move xfer from xfer_list to xfer_errored_list. */
list_move_tail(&xfer->list_node, &wa->xfer_errored_list);
- spin_unlock_irq(&wa->xfer_list_lock);
+ spin_unlock(&wa->xfer_list_lock);
spin_unlock_irqrestore(&xfer->lock, flags);
queue_work(wusbd, &wa->xfer_error_work);
} else {
struct uwb_rceb *reply, ssize_t reply_size)
{
struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply;
+ unsigned long flags;
if (r != NULL) {
if (r->bResultCode != UWB_RC_RES_SUCCESS)
} else
dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
- spin_lock_irq(&rc->rsvs_lock);
+ spin_lock_irqsave(&rc->rsvs_lock, flags);
if (rc->set_drp_ie_pending > 1) {
rc->set_drp_ie_pending = 0;
- uwb_rsv_queue_update(rc);
+ uwb_rsv_queue_update(rc);
} else {
- rc->set_drp_ie_pending = 0;
+ rc->set_drp_ie_pending = 0;
}
- spin_unlock_irq(&rc->rsvs_lock);
+ spin_unlock_irqrestore(&rc->rsvs_lock, flags);
}
/**
#else
static inline int phy_pm_runtime_get(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_pm_runtime_get_sync(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_pm_runtime_put(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_pm_runtime_put_sync(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_init(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_exit(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_power_on(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_power_off(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
git.openpandora.org / pandora-kernel.git / commitdiff