#include <linux/ftrace.h>
#include <linux/suspend.h>
#include <linux/gfp.h>
+#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
-#include <asm/io.h>
#include <asm/apic.h>
#include <asm/cpufeature.h>
#include <asm/desc.h>
"\tmovl %%eax,%%fs\n"
"\tmovl %%eax,%%gs\n"
"\tmovl %%eax,%%ss\n"
- ::: "eax", "memory");
+ : : : "eax", "memory");
#undef STR
#undef __STR
}
if (image->preserve_context) {
#ifdef CONFIG_X86_IO_APIC
- /* We need to put APICs in legacy mode so that we can
+ /*
+ * We need to put APICs in legacy mode so that we can
* get timer interrupts in second kernel. kexec/kdump
* paths already have calls to disable_IO_APIC() in
* one form or other. kexec jump path also need
page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
<< PAGE_SHIFT);
- /* The segment registers are funny things, they have both a
+ /*
+ * The segment registers are funny things, they have both a
* visible and an invisible part. Whenever the visible part is
* set to a specific selector, the invisible part is loaded
* with from a table in memory. At no other time is the
* segments, before I zap the gdt with an invalid value.
*/
load_segments();
- /* The gdt & idt are now invalid.
+ /*
+ * The gdt & idt are now invalid.
* If you want to load them you must set up your own idt & gdt.
*/
- set_gdt(phys_to_virt(0),0);
- set_idt(phys_to_virt(0),0);
+ set_gdt(phys_to_virt(0), 0);
+ set_idt(phys_to_virt(0), 0);
/* now call it */
image->start = relocate_kernel_ptr((unsigned long)image->head,
#include <linux/reboot.h>
#include <linux/numa.h>
#include <linux/ftrace.h>
+#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
-#include <asm/io.h>
static void init_level2_page(pmd_t *level2p, unsigned long addr)
{
}
level3p = (pud_t *)page_address(page);
result = init_level3_page(image, level3p, addr, last_addr);
- if (result) {
+ if (result)
goto out;
- }
set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
addr += PGDIR_SIZE;
}
page_list[PA_TABLE_PAGE] =
(unsigned long)__pa(page_address(image->control_code_page));
- /* The segment registers are funny things, they have both a
+ /*
+ * The segment registers are funny things, they have both a
* visible and an invisible part. Whenever the visible part is
* set to a specific selector, the invisible part is loaded
* with from a table in memory. At no other time is the
* segments, before I zap the gdt with an invalid value.
*/
load_segments();
- /* The gdt & idt are now invalid.
+ /*
+ * The gdt & idt are now invalid.
* If you want to load them you must set up your own idt & gdt.
*/
- set_gdt(phys_to_virt(0),0);
- set_idt(phys_to_virt(0),0);
+ set_gdt(phys_to_virt(0), 0);
+ set_idt(phys_to_virt(0), 0);
/* now call it */
relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
#define PTR(x) (x << 2)
-/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
* ~ control_page + PAGE_SIZE are used as data storage and stack for
* jumping back
*/
movl %eax, CP_PA_SWAP_PAGE(%edi)
movl %ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
- /* get physical address of control page now */
- /* this is impossible after page table switch */
+ /*
+ * get physical address of control page now
+ * this is impossible after page table switch
+ */
movl PTR(PA_CONTROL_PAGE)(%ebp), %edi
/* switch to new set of page tables */
/* store the start address on the stack */
pushl %edx
- /* Set cr0 to a known state:
+ /*
+ * Set cr0 to a known state:
* - Paging disabled
* - Alignment check disabled
* - Write protect disabled
/* clear cr4 if applicable */
testl %ecx, %ecx
jz 1f
- /* Set cr4 to a known state:
+ /*
+ * Set cr4 to a known state:
* Setting everything to zero seems safe.
*/
xorl %eax, %eax
call swap_pages
addl $8, %esp
- /* To be certain of avoiding problems with self-modifying code
+ /*
+ * To be certain of avoiding problems with self-modifying code
* I need to execute a serializing instruction here.
* So I flush the TLB, it's handy, and not processor dependent.
*/
xorl %eax, %eax
movl %eax, %cr3
- /* set all of the registers to known values */
- /* leave %esp alone */
+ /*
+ * set all of the registers to known values
+ * leave %esp alone
+ */
testl %esi, %esi
jnz 1f
.code64
.globl relocate_kernel
relocate_kernel:
- /* %rdi indirection_page
+ /*
+ * %rdi indirection_page
* %rsi page_list
* %rdx start address
*/
pushq $0
popfq
- /* get physical address of control page now */
- /* this is impossible after page table switch */
+ /*
+ * get physical address of control page now
+ * this is impossible after page table switch
+ */
movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
/* get physical address of page table now too */
/* store the start address on the stack */
pushq %rdx
- /* Set cr0 to a known state:
+ /*
+ * Set cr0 to a known state:
* - Paging enabled
* - Alignment check disabled
* - Write protect disabled
orl $(X86_CR0_PG | X86_CR0_PE), %eax
movq %rax, %cr0
- /* Set cr4 to a known state:
+ /*
+ * Set cr4 to a known state:
* - physical address extension enabled
*/
movq $X86_CR4_PAE, %rax
jmp 0b
3:
- /* To be certain of avoiding problems with self-modifying code
+ /*
+ * To be certain of avoiding problems with self-modifying code
* I need to execute a serializing instruction here.
* So I flush the TLB by reloading %cr3 here, it's handy,
* and not processor dependent.
movq %cr3, %rax
movq %rax, %cr3
- /* set all of the registers to known values */
- /* leave %rsp alone */
+ /*
+ * set all of the registers to known values
+ * leave %rsp alone
+ */
xorq %rax, %rax
xorq %rbx, %rbx
git.openpandora.org / pandora-kernel.git / commitdiff