I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM
authorKevin Hilman <khilman@ti.com>
Tue, 17 May 2011 14:31:38 +0000 (16:31 +0200)
committerBen Dooks <ben-linux@fluff.org>
Sat, 29 Oct 2011 08:37:09 +0000 (09:37 +0100)
Current usage of runtime PM is not quite correct.  The actual
idle/unidle of the I2C hardware should not happen until the runtime PM
callbacks are called.  Therefore, change omap_i2c_[un]idle() functions
to only be called from the runtime PM callbacks (when usage count
transitions to/from zero.)

Also, the runtime PM core does usage counting and replaces
functionality currently managed by the dev->idle flag.  Remove usage
of dev->idle in favor of using runtime PM, and checking status using
pm_runtime_suspended().

Signed-off-by: Kevin Hilman <khilman@ti.com>
drivers/i2c/busses/i2c-omap.c

index cddb29c..a43d002 100644 (file)
@@ -194,7 +194,6 @@ struct omap_i2c_dev {
                                                 */
        u8                      rev;
        unsigned                b_hw:1;         /* bad h/w fixes */
-       unsigned                idle:1;
        u16                     iestate;        /* Saved interrupt register */
        u16                     pscstate;
        u16                     scllstate;
@@ -269,12 +268,8 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
        struct omap_i2c_bus_platform_data *pdata;
 
-       WARN_ON(!dev->idle);
-
        pdata = dev->dev->platform_data;
 
-       pm_runtime_get_sync(dev->dev);
-
        if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
                omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
                omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
@@ -285,7 +280,6 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
                omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
                omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
        }
-       dev->idle = 0;
 
        /*
         * Don't write to this register if the IE state is 0 as it can
@@ -300,8 +294,6 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
        struct omap_i2c_bus_platform_data *pdata;
        u16 iv;
 
-       WARN_ON(dev->idle);
-
        pdata = dev->dev->platform_data;
 
        dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -315,12 +307,9 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
        } else {
                omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
 
-               /* Flush posted write before the dev->idle store occurs */
+               /* Flush posted write */
                omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
        }
-       dev->idle = 1;
-
-       pm_runtime_put_sync(dev->dev);
 }
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -644,7 +633,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
        int i;
        int r;
 
-       omap_i2c_unidle(dev);
+       pm_runtime_get_sync(dev->dev);
 
        r = omap_i2c_wait_for_bb(dev);
        if (r < 0)
@@ -667,7 +656,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
        omap_i2c_wait_for_bb(dev);
 out:
-       omap_i2c_idle(dev);
+       pm_runtime_put(dev->dev);
        return r;
 }
 
@@ -727,7 +716,7 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id)
        struct omap_i2c_dev *dev = dev_id;
        u16 iv, w;
 
-       if (dev->idle)
+       if (pm_runtime_suspended(dev->dev))
                return IRQ_NONE;
 
        iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
@@ -819,7 +808,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
 
        pdata = dev->dev->platform_data;
 
-       if (dev->idle)
+       if (pm_runtime_suspended(dev->dev))
                return IRQ_NONE;
 
        bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -1021,7 +1010,6 @@ omap_i2c_probe(struct platform_device *pdev)
        }
 
        dev->speed = speed;
-       dev->idle = 1;
        dev->dev = &pdev->dev;
        dev->irq = irq->start;
        dev->base = ioremap(mem->start, resource_size(mem));
@@ -1040,7 +1028,7 @@ omap_i2c_probe(struct platform_device *pdev)
                dev->regs = (u8 *)reg_map_ip_v1;
 
        pm_runtime_enable(dev->dev);
-       omap_i2c_unidle(dev);
+       pm_runtime_get_sync(dev->dev);
 
        dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
@@ -1087,7 +1075,7 @@ omap_i2c_probe(struct platform_device *pdev)
        dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
                 pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 
-       omap_i2c_idle(dev);
+       pm_runtime_put(dev->dev);
 
        adap = &dev->adapter;
        i2c_set_adapdata(adap, dev);
@@ -1111,7 +1099,7 @@ err_free_irq:
        free_irq(dev->irq, dev);
 err_unuse_clocks:
        omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-       omap_i2c_idle(dev);
+       pm_runtime_put(dev->dev);
        iounmap(dev->base);
 err_free_mem:
        platform_set_drvdata(pdev, NULL);
@@ -1140,12 +1128,43 @@ omap_i2c_remove(struct platform_device *pdev)
        return 0;
 }
 
+#ifdef CONFIG_PM_RUNTIME
+static int omap_i2c_runtime_suspend(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+       omap_i2c_idle(_dev);
+
+       return 0;
+}
+
+static int omap_i2c_runtime_resume(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+       omap_i2c_unidle(_dev);
+
+       return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+       .runtime_suspend = omap_i2c_runtime_suspend,
+       .runtime_resume = omap_i2c_runtime_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
 static struct platform_driver omap_i2c_driver = {
        .probe          = omap_i2c_probe,
        .remove         = omap_i2c_remove,
        .driver         = {
                .name   = "omap_i2c",
                .owner  = THIS_MODULE,
+               .pm     = OMAP_I2C_PM_OPS,
        },
 };