tg3: phy tmp variable roundup
authorMatt Carlson <mcarlson@broadcom.com>
Wed, 15 Sep 2010 09:00:01 +0000 (09:00 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 15 Sep 2010 21:16:15 +0000 (14:16 -0700)
The tg3's phy routines define temporary variables in many locations
within the same routine.  This patch unifies all temporary variables
into one location.

Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c

index 0d0deaa..e7a2ba8 100644 (file)
@@ -1917,19 +1917,16 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
  */
 static int tg3_phy_reset(struct tg3 *tp)
 {
-       u32 cpmuctrl;
-       u32 phy_status;
+       u32 val, cpmuctrl;
        int err;
 
        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-               u32 val;
-
                val = tr32(GRC_MISC_CFG);
                tw32_f(GRC_MISC_CFG, val & ~GRC_MISC_CFG_EPHY_IDDQ);
                udelay(40);
        }
-       err  = tg3_readphy(tp, MII_BMSR, &phy_status);
-       err |= tg3_readphy(tp, MII_BMSR, &phy_status);
+       err  = tg3_readphy(tp, MII_BMSR, &val);
+       err |= tg3_readphy(tp, MII_BMSR, &val);
        if (err != 0)
                return -EBUSY;
 
@@ -1961,18 +1958,14 @@ static int tg3_phy_reset(struct tg3 *tp)
                return err;
 
        if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY) {
-               u32 phy;
-
-               phy = MII_TG3_DSP_EXP8_AEDW | MII_TG3_DSP_EXP8_REJ2MHz;
-               tg3_phydsp_write(tp, MII_TG3_DSP_EXP8, phy);
+               val = MII_TG3_DSP_EXP8_AEDW | MII_TG3_DSP_EXP8_REJ2MHz;
+               tg3_phydsp_write(tp, MII_TG3_DSP_EXP8, val);
 
                tw32(TG3_CPMU_CTRL, cpmuctrl);
        }
 
        if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
            GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
-               u32 val;
-
                val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
                if ((val & CPMU_LSPD_1000MB_MACCLK_MASK) ==
                    CPMU_LSPD_1000MB_MACCLK_12_5) {
@@ -2028,23 +2021,19 @@ out:
                /* Cannot do read-modify-write on 5401 */
                tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
        } else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
-               u32 phy_reg;
-
                /* Set bit 14 with read-modify-write to preserve other bits */
                if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007) &&
-                   !tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy_reg))
-                       tg3_writephy(tp, MII_TG3_AUX_CTRL, phy_reg | 0x4000);
+                   !tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
+                       tg3_writephy(tp, MII_TG3_AUX_CTRL, val | 0x4000);
        }
 
        /* Set phy register 0x10 bit 0 to high fifo elasticity to support
         * jumbo frames transmission.
         */
        if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
-               u32 phy_reg;
-
-               if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
+               if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &val))
                        tg3_writephy(tp, MII_TG3_EXT_CTRL,
-                                    phy_reg | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
+                                    val | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
        }
 
        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
@@ -3060,7 +3049,7 @@ static int tg3_adv_1000T_flowctrl_ok(struct tg3 *tp, u32 *lcladv, u32 *rmtadv)
 static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 {
        int current_link_up;
-       u32 bmsr, dummy;
+       u32 bmsr, val;
        u32 lcl_adv, rmt_adv;
        u16 current_speed;
        u8 current_duplex;
@@ -3140,8 +3129,8 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
        }
 
        /* Clear pending interrupts... */
-       tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
-       tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
+       tg3_readphy(tp, MII_TG3_ISTAT, &val);
+       tg3_readphy(tp, MII_TG3_ISTAT, &val);
 
        if (tp->phy_flags & TG3_PHYFLG_USE_MI_INTERRUPT)
                tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
@@ -3162,8 +3151,6 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
        current_duplex = DUPLEX_INVALID;
 
        if (tp->phy_flags & TG3_PHYFLG_CAPACITIVE_COUPLING) {
-               u32 val;
-
                tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4007);
                tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
                if (!(val & (1 << 10))) {
@@ -3238,13 +3225,11 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 
 relink:
        if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
-               u32 tmp;
-
                tg3_phy_copper_begin(tp);
 
-               tg3_readphy(tp, MII_BMSR, &tmp);
-               if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
-                   (tmp & BMSR_LSTATUS))
+               tg3_readphy(tp, MII_BMSR, &bmsr);
+               if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
+                   (bmsr & BMSR_LSTATUS))
                        current_link_up = 1;
        }