+++ /dev/null
-Copyright (C) 2003, Fred Boulay <dilb@handhelds.org>
-Licensed under GPL v2
-
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/autogen.sh xine-lib-1-beta12/autogen.sh
-*** xine-lib-1-beta12_orig/autogen.sh Sun Mar 2 06:47:39 2003
---- xine-lib-1-beta12/autogen.sh Sun May 18 13:32:51 2003
-***************
-*** 140,145 ****
---- 140,149 ----
- echo $_echo_n " + Running libtoolize: $_echo_c";
- libtoolize --force --copy >/dev/null 2>&1;
- echo "done."
-+ echo $_echo_n " + copying patched ltmain.sh solving DESTDIR issues: $_echo_c";
-+ cp -f ltmain_patched.sh ltmain.sh;
-+ echo "done."
-+
- }
-
- #--------------------
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/configure.ac xine-lib-1-beta12/configure.ac
-*** xine-lib-1-beta12_orig/configure.ac Sun May 11 13:11:06 2003
---- xine-lib-1-beta12/configure.ac Sun May 18 15:59:50 2003
-***************
-*** 670,676 ****
- dnl ---------------------------------------------
- dnl freetype2 lib.
- dnl ---------------------------------------------
-! AC_PATH_PROG(FREETYPE_CONFIG, freetype-config, no)
- if test "$FREETYPE_CONFIG" = "no" ; then
- AC_MSG_RESULT([*** freetype-config not found, freetype2 support disabled ***])
- else
---- 670,676 ----
- dnl ---------------------------------------------
- dnl freetype2 lib.
- dnl ---------------------------------------------
-! AC_PATH_PROG(FREETYPE_CONFIG, moooooooooooo_putain_de_script_freetype-config, no)
- if test "$FREETYPE_CONFIG" = "no" ; then
- AC_MSG_RESULT([*** freetype-config not found, freetype2 support disabled ***])
- else
-***************
-*** 737,743 ****
- dnl ---------------------------------------------
- dnl gnome-vfs support
- dnl ---------------------------------------------
-! PKG_CHECK_MODULES(GNOME_VFS, gnome-vfs-2.0,
- no_gnome_vfs=no,
- no_gnome_vfs=yes)
- AC_SUBST(GNOME_VFS_CFLAGS)
---- 737,743 ----
- dnl ---------------------------------------------
- dnl gnome-vfs support
- dnl ---------------------------------------------
-! PKG_CHECK_MODULES(GNOME_VFS, putain_de_module_gnome-vfs-2.0,
- no_gnome_vfs=no,
- no_gnome_vfs=yes)
- AC_SUBST(GNOME_VFS_CFLAGS)
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/ltmain_patched.sh xine-lib-1-beta12/ltmain_patched.sh
-*** xine-lib-1-beta12_orig/ltmain_patched.sh Wed Dec 31 19:00:00 1969
---- xine-lib-1-beta12/ltmain_patched.sh Sun May 18 13:31:34 2003
-***************
-*** 0 ****
---- 1,5044 ----
-+ # ltmain.sh - Provide generalized library-building support services.
-+ # NOTE: Changing this file will not affect anything until you rerun configure.
-+ #
-+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-+ # Free Software Foundation, Inc.
-+ # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+ #
-+ # This program is free software; you can redistribute it and/or modify
-+ # it under the terms of the GNU General Public License as published by
-+ # the Free Software Foundation; either version 2 of the License, or
-+ # (at your option) any later version.
-+ #
-+ # This program is distributed in the hope that it will be useful, but
-+ # WITHOUT ANY WARRANTY; without even the implied warranty of
-+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ # General Public License for more details.
-+ #
-+ # You should have received a copy of the GNU General Public License
-+ # along with this program; if not, write to the Free Software
-+ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ #
-+ # As a special exception to the GNU General Public License, if you
-+ # distribute this file as part of a program that contains a
-+ # configuration script generated by Autoconf, you may include it under
-+ # the same distribution terms that you use for the rest of that program.
-+
-+ # Check that we have a working $echo.
-+ if test "X$1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+ elif test "X$1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-+ # Yippee, $echo works!
-+ :
-+ else
-+ # Restart under the correct shell, and then maybe $echo will work.
-+ exec $SHELL "$0" --no-reexec ${1+"$@"}
-+ fi
-+
-+ if test "X$1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+ $*
-+ EOF
-+ exit 0
-+ fi
-+
-+ # The name of this program.
-+ progname=`$echo "$0" | sed 's%^.*/%%'`
-+ modename="$progname"
-+
-+ # Constants.
-+ PROGRAM=ltmain.sh
-+ PACKAGE=libtool
-+ VERSION=1.4.2a
-+ TIMESTAMP=" (1.922.2.79 2001/11/28 21:50:31)"
-+
-+ default_mode=
-+ help="Try \`$progname --help' for more information."
-+ magic="%%%MAGIC variable%%%"
-+ mkdir="mkdir"
-+ mv="mv -f"
-+ rm="rm -f"
-+
-+ # Sed substitution that helps us do robust quoting. It backslashifies
-+ # metacharacters that are still active within double-quoted strings.
-+ Xsed='sed -e 1s/^X//'
-+ sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-+ SP2NL='tr \040 \012'
-+ NL2SP='tr \015\012 \040\040'
-+
-+ # NLS nuisances.
-+ # Only set LANG and LC_ALL to C if already set.
-+ # These must not be set unconditionally because not all systems understand
-+ # e.g. LANG=C (notably SCO).
-+ # We save the old values to restore during execute mode.
-+ if test "${LC_ALL+set}" = set; then
-+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-+ fi
-+ if test "${LANG+set}" = set; then
-+ save_LANG="$LANG"; LANG=C; export LANG
-+ fi
-+
-+ # Make sure IFS has a sensible default
-+ : ${IFS=" "}
-+
-+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-+ echo "$modename: not configured to build any kind of library" 1>&2
-+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-+ exit 1
-+ fi
-+
-+ # Global variables.
-+ mode=$default_mode
-+ nonopt=
-+ prev=
-+ prevopt=
-+ run=
-+ show="$echo"
-+ show_help=
-+ execute_dlfiles=
-+ lo2o="s/\\.lo\$/.${objext}/"
-+ o2lo="s/\\.${objext}\$/.lo/"
-+
-+ # Parse our command line options once, thoroughly.
-+ while test $# -gt 0
-+ do
-+ arg="$1"
-+ shift
-+
-+ case $arg in
-+ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-+ *) optarg= ;;
-+ esac
-+
-+ # If the previous option needs an argument, assign it.
-+ if test -n "$prev"; then
-+ case $prev in
-+ execute_dlfiles)
-+ execute_dlfiles="$execute_dlfiles $arg"
-+ ;;
-+ *)
-+ eval "$prev=\$arg"
-+ ;;
-+ esac
-+
-+ prev=
-+ prevopt=
-+ continue
-+ fi
-+
-+ # Have we seen a non-optional argument yet?
-+ case $arg in
-+ --help)
-+ show_help=yes
-+ ;;
-+
-+ --version)
-+ echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-+ exit 0
-+ ;;
-+
-+ --config)
-+ sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
-+ exit 0
-+ ;;
-+
-+ --debug)
-+ echo "$progname: enabling shell trace mode"
-+ set -x
-+ ;;
-+
-+ --dry-run | -n)
-+ run=:
-+ ;;
-+
-+ --features)
-+ echo "host: $host"
-+ if test "$build_libtool_libs" = yes; then
-+ echo "enable shared libraries"
-+ else
-+ echo "disable shared libraries"
-+ fi
-+ if test "$build_old_libs" = yes; then
-+ echo "enable static libraries"
-+ else
-+ echo "disable static libraries"
-+ fi
-+ exit 0
-+ ;;
-+
-+ --finish) mode="finish" ;;
-+
-+ --mode) prevopt="--mode" prev=mode ;;
-+ --mode=*) mode="$optarg" ;;
-+
-+ --preserve-dup-deps) duplicate_deps="yes" ;;
-+
-+ --quiet | --silent)
-+ show=:
-+ ;;
-+
-+ -dlopen)
-+ prevopt="-dlopen"
-+ prev=execute_dlfiles
-+ ;;
-+
-+ -*)
-+ $echo "$modename: unrecognized option \`$arg'" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ ;;
-+
-+ *)
-+ nonopt="$arg"
-+ break
-+ ;;
-+ esac
-+ done
-+
-+ if test -n "$prevopt"; then
-+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ # If this variable is set in any of the actions, the command in it
-+ # will be execed at the end. This prevents here-documents from being
-+ # left over by shells.
-+ exec_cmd=
-+
-+ if test -z "$show_help"; then
-+
-+ # Infer the operation mode.
-+ if test -z "$mode"; then
-+ case $nonopt in
-+ *cc | *++ | gcc* | *-gcc*)
-+ mode=link
-+ for arg
-+ do
-+ case $arg in
-+ -c)
-+ mode=compile
-+ break
-+ ;;
-+ esac
-+ done
-+ ;;
-+ *db | *dbx | *strace | *truss)
-+ mode=execute
-+ ;;
-+ *install*|cp|mv)
-+ mode=install
-+ ;;
-+ *rm)
-+ mode=uninstall
-+ ;;
-+ *)
-+ # If we have no mode, but dlfiles were specified, then do execute mode.
-+ test -n "$execute_dlfiles" && mode=execute
-+
-+ # Just use the default operation mode.
-+ if test -z "$mode"; then
-+ if test -n "$nonopt"; then
-+ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-+ else
-+ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-+ fi
-+ fi
-+ ;;
-+ esac
-+ fi
-+
-+ # Only execute mode is allowed to have -dlopen flags.
-+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
-+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ # Change the help message to a mode-specific one.
-+ generic_help="$help"
-+ help="Try \`$modename --help --mode=$mode' for more information."
-+
-+ # These modes are in order of execution frequency so that they run quickly.
-+ case $mode in
-+ # libtool compile mode
-+ compile)
-+ modename="$modename: compile"
-+ # Get the compilation command and the source file.
-+ base_compile=
-+ prev=
-+ lastarg=
-+ srcfile="$nonopt"
-+ suppress_output=
-+
-+ user_target=no
-+ for arg
-+ do
-+ case $prev in
-+ "") ;;
-+ xcompiler)
-+ # Aesthetically quote the previous argument.
-+ prev=
-+ lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+
-+ case $arg in
-+ # Double-quote args containing other shell metacharacters.
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, so we specify it separately.
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+
-+ # Add the previous argument to base_compile.
-+ if test -z "$base_compile"; then
-+ base_compile="$lastarg"
-+ else
-+ base_compile="$base_compile $lastarg"
-+ fi
-+ continue
-+ ;;
-+ esac
-+
-+ # Accept any command-line options.
-+ case $arg in
-+ -o)
-+ if test "$user_target" != "no"; then
-+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-+ exit 1
-+ fi
-+ user_target=next
-+ ;;
-+
-+ -static)
-+ build_old_libs=yes
-+ continue
-+ ;;
-+
-+ -prefer-pic)
-+ pic_mode=yes
-+ continue
-+ ;;
-+
-+ -prefer-non-pic)
-+ pic_mode=no
-+ continue
-+ ;;
-+
-+ -Xcompiler)
-+ prev=xcompiler
-+ continue
-+ ;;
-+
-+ -Wc,*)
-+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-+ lastarg=
-+ save_ifs="$IFS"; IFS=','
-+ for arg in $args; do
-+ IFS="$save_ifs"
-+
-+ # Double-quote args containing other shell metacharacters.
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, so we specify it separately.
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ lastarg="$lastarg $arg"
-+ done
-+ IFS="$save_ifs"
-+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-+
-+ # Add the arguments to base_compile.
-+ if test -z "$base_compile"; then
-+ base_compile="$lastarg"
-+ else
-+ base_compile="$base_compile $lastarg"
-+ fi
-+ continue
-+ ;;
-+ esac
-+
-+ case $user_target in
-+ next)
-+ # The next one is the -o target name
-+ user_target=yes
-+ continue
-+ ;;
-+ yes)
-+ # We got the output file
-+ user_target=set
-+ libobj="$arg"
-+ continue
-+ ;;
-+ esac
-+
-+ # Accept the current argument as the source file.
-+ lastarg="$srcfile"
-+ srcfile="$arg"
-+
-+ # Aesthetically quote the previous argument.
-+
-+ # Backslashify any backslashes, double quotes, and dollar signs.
-+ # These are the only characters that are still specially
-+ # interpreted inside of double-quoted scrings.
-+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-+
-+ # Double-quote args containing other shell metacharacters.
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, so we specify it separately.
-+ case $lastarg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ lastarg="\"$lastarg\""
-+ ;;
-+ esac
-+
-+ # Add the previous argument to base_compile.
-+ if test -z "$base_compile"; then
-+ base_compile="$lastarg"
-+ else
-+ base_compile="$base_compile $lastarg"
-+ fi
-+ done
-+
-+ case $user_target in
-+ set)
-+ ;;
-+ no)
-+ # Get the name of the library object.
-+ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-+ ;;
-+ *)
-+ $echo "$modename: you must specify a target with \`-o'" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ # Recognize several different file suffixes.
-+ # If the user specifies -o file.o, it is replaced with file.lo
-+ xform='[cCFSfmso]'
-+ case $libobj in
-+ *.ada) xform=ada ;;
-+ *.adb) xform=adb ;;
-+ *.ads) xform=ads ;;
-+ *.asm) xform=asm ;;
-+ *.c++) xform=c++ ;;
-+ *.cc) xform=cc ;;
-+ *.cpp) xform=cpp ;;
-+ *.cxx) xform=cxx ;;
-+ *.f90) xform=f90 ;;
-+ *.for) xform=for ;;
-+ esac
-+
-+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-+
-+ case $libobj in
-+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-+ *)
-+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ if test -z "$base_compile"; then
-+ $echo "$modename: you must specify a compilation command" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ # Delete any leftover library objects.
-+ if test "$build_old_libs" = yes; then
-+ removelist="$obj $libobj"
-+ else
-+ removelist="$libobj"
-+ fi
-+
-+ $run $rm $removelist
-+ trap "$run $rm $removelist; exit 1" 1 2 15
-+
-+ # On Cygwin there's no "real" PIC flag so we must build both object types
-+ case $host_os in
-+ cygwin* | mingw* | pw32* | os2*)
-+ pic_mode=default
-+ ;;
-+ esac
-+ if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
-+ # non-PIC code in shared libraries is not supported
-+ pic_mode=default
-+ fi
-+
-+ # Calculate the filename of the output object if compiler does
-+ # not support -o with -c
-+ if test "$compiler_c_o" = no; then
-+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-+ lockfile="$output_obj.lock"
-+ removelist="$removelist $output_obj $lockfile"
-+ trap "$run $rm $removelist; exit 1" 1 2 15
-+ else
-+ need_locks=no
-+ lockfile=
-+ fi
-+
-+ # Lock this critical section if it is needed
-+ # We use this script file to make the link, it avoids creating a new file
-+ if test "$need_locks" = yes; then
-+ until $run ln "$0" "$lockfile" 2>/dev/null; do
-+ $show "Waiting for $lockfile to be removed"
-+ sleep 2
-+ done
-+ elif test "$need_locks" = warn; then
-+ if test -f "$lockfile"; then
-+ echo "\
-+ *** ERROR, $lockfile exists and contains:
-+ `cat $lockfile 2>/dev/null`
-+
-+ This indicates that another process is trying to use the same
-+ temporary object file, and libtool could not work around it because
-+ your compiler does not support \`-c' and \`-o' together. If you
-+ repeat this compilation, it may succeed, by chance, but you had better
-+ avoid parallel builds (make -j) in this platform, or get a better
-+ compiler."
-+
-+ $run $rm $removelist
-+ exit 1
-+ fi
-+ echo $srcfile > "$lockfile"
-+ fi
-+
-+ if test -n "$fix_srcfile_path"; then
-+ eval srcfile=\"$fix_srcfile_path\"
-+ fi
-+
-+ # Only build a PIC object if we are building libtool libraries.
-+ if test "$build_libtool_libs" = yes; then
-+ # Without this assignment, base_compile gets emptied.
-+ fbsd_hideous_sh_bug=$base_compile
-+
-+ if test "$pic_mode" != no; then
-+ # All platforms use -DPIC, to notify preprocessed assembler code.
-+ command="$base_compile $srcfile $pic_flag -DPIC"
-+ else
-+ # Don't build PIC code
-+ command="$base_compile $srcfile"
-+ fi
-+ if test "$build_old_libs" = yes; then
-+ lo_libobj="$libobj"
-+ dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$dir" = "X$libobj"; then
-+ dir="$objdir"
-+ else
-+ dir="$dir/$objdir"
-+ fi
-+ libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-+
-+ if test -d "$dir"; then
-+ $show "$rm $libobj"
-+ $run $rm $libobj
-+ else
-+ $show "$mkdir $dir"
-+ $run $mkdir $dir
-+ status=$?
-+ if test $status -ne 0 && test ! -d $dir; then
-+ exit $status
-+ fi
-+ fi
-+ fi
-+ if test "$compiler_o_lo" = yes; then
-+ output_obj="$libobj"
-+ command="$command -o $output_obj"
-+ elif test "$compiler_c_o" = yes; then
-+ output_obj="$obj"
-+ command="$command -o $output_obj"
-+ fi
-+
-+ $run $rm "$output_obj"
-+ $show "$command"
-+ if $run eval "$command"; then :
-+ else
-+ test -n "$output_obj" && $run $rm $removelist
-+ exit 1
-+ fi
-+
-+ if test "$need_locks" = warn &&
-+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-+ echo "\
-+ *** ERROR, $lockfile contains:
-+ `cat $lockfile 2>/dev/null`
-+
-+ but it should contain:
-+ $srcfile
-+
-+ This indicates that another process is trying to use the same
-+ temporary object file, and libtool could not work around it because
-+ your compiler does not support \`-c' and \`-o' together. If you
-+ repeat this compilation, it may succeed, by chance, but you had better
-+ avoid parallel builds (make -j) in this platform, or get a better
-+ compiler."
-+
-+ $run $rm $removelist
-+ exit 1
-+ fi
-+
-+ # Just move the object if needed, then go on to compile the next one
-+ if test x"$output_obj" != x"$libobj"; then
-+ $show "$mv $output_obj $libobj"
-+ if $run $mv $output_obj $libobj; then :
-+ else
-+ error=$?
-+ $run $rm $removelist
-+ exit $error
-+ fi
-+ fi
-+
-+ # If we have no pic_flag, then copy the object into place and finish.
-+ if (test -z "$pic_flag" || test "$pic_mode" != default) &&
-+ test "$build_old_libs" = yes; then
-+ # Rename the .lo from within objdir to obj
-+ if test -f $obj; then
-+ $show $rm $obj
-+ $run $rm $obj
-+ fi
-+
-+ $show "$mv $libobj $obj"
-+ if $run $mv $libobj $obj; then :
-+ else
-+ error=$?
-+ $run $rm $removelist
-+ exit $error
-+ fi
-+
-+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$obj"; then
-+ xdir="."
-+ else
-+ xdir="$xdir"
-+ fi
-+ baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
-+ libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-+ # Now arrange that obj and lo_libobj become the same file
-+ $show "(cd $xdir && $LN_S $baseobj $libobj)"
-+ if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-+ # Unlock the critical section if it was locked
-+ if test "$need_locks" != no; then
-+ $run $rm "$lockfile"
-+ fi
-+ exit 0
-+ else
-+ error=$?
-+ $run $rm $removelist
-+ exit $error
-+ fi
-+ fi
-+
-+ # Allow error messages only from the first compilation.
-+ suppress_output=' >/dev/null 2>&1'
-+ fi
-+
-+ # Only build a position-dependent object if we build old libraries.
-+ if test "$build_old_libs" = yes; then
-+ if test "$pic_mode" != yes; then
-+ # Don't build PIC code
-+ command="$base_compile $srcfile"
-+ else
-+ # All platforms use -DPIC, to notify preprocessed assembler code.
-+ command="$base_compile $srcfile $pic_flag -DPIC"
-+ fi
-+ if test "$compiler_c_o" = yes; then
-+ command="$command -o $obj"
-+ output_obj="$obj"
-+ fi
-+
-+ # Suppress compiler output if we already did a PIC compilation.
-+ command="$command$suppress_output"
-+ $run $rm "$output_obj"
-+ $show "$command"
-+ if $run eval "$command"; then :
-+ else
-+ $run $rm $removelist
-+ exit 1
-+ fi
-+
-+ if test "$need_locks" = warn &&
-+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-+ echo "\
-+ *** ERROR, $lockfile contains:
-+ `cat $lockfile 2>/dev/null`
-+
-+ but it should contain:
-+ $srcfile
-+
-+ This indicates that another process is trying to use the same
-+ temporary object file, and libtool could not work around it because
-+ your compiler does not support \`-c' and \`-o' together. If you
-+ repeat this compilation, it may succeed, by chance, but you had better
-+ avoid parallel builds (make -j) in this platform, or get a better
-+ compiler."
-+
-+ $run $rm $removelist
-+ exit 1
-+ fi
-+
-+ # Just move the object if needed
-+ if test x"$output_obj" != x"$obj"; then
-+ $show "$mv $output_obj $obj"
-+ if $run $mv $output_obj $obj; then :
-+ else
-+ error=$?
-+ $run $rm $removelist
-+ exit $error
-+ fi
-+ fi
-+
-+ # Create an invalid libtool object if no PIC, so that we do not
-+ # accidentally link it into a program.
-+ if test "$build_libtool_libs" != yes; then
-+ $show "echo timestamp > $libobj"
-+ $run eval "echo timestamp > \$libobj" || exit $?
-+ else
-+ # Move the .lo from within objdir
-+ $show "$mv $libobj $lo_libobj"
-+ if $run $mv $libobj $lo_libobj; then :
-+ else
-+ error=$?
-+ $run $rm $removelist
-+ exit $error
-+ fi
-+ fi
-+ fi
-+
-+ # Unlock the critical section if it was locked
-+ if test "$need_locks" != no; then
-+ $run $rm "$lockfile"
-+ fi
-+
-+ exit 0
-+ ;;
-+
-+ # libtool link mode
-+ link | relink)
-+ modename="$modename: link"
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ # It is impossible to link a dll without this setting, and
-+ # we shouldn't force the makefile maintainer to figure out
-+ # which system we are compiling for in order to pass an extra
-+ # flag for every libtool invokation.
-+ # allow_undefined=no
-+
-+ # FIXME: Unfortunately, there are problems with the above when trying
-+ # to make a dll which has undefined symbols, in which case not
-+ # even a static library is built. For now, we need to specify
-+ # -no-undefined on the libtool link line when we can be certain
-+ # that all symbols are satisfied, otherwise we get a static library.
-+ allow_undefined=yes
-+ ;;
-+ *)
-+ allow_undefined=yes
-+ ;;
-+ esac
-+ libtool_args="$nonopt"
-+ compile_command="$nonopt"
-+ finalize_command="$nonopt"
-+
-+ compile_rpath=
-+ finalize_rpath=
-+ compile_shlibpath=
-+ finalize_shlibpath=
-+ convenience=
-+ old_convenience=
-+ deplibs=
-+ old_deplibs=
-+ compiler_flags=
-+ linker_flags=
-+ dllsearchpath=
-+ lib_search_path=`pwd`
-+
-+ avoid_version=no
-+ dlfiles=
-+ dlprefiles=
-+ dlself=no
-+ export_dynamic=no
-+ export_symbols=
-+ export_symbols_regex=
-+ generated=
-+ libobjs=
-+ ltlibs=
-+ module=no
-+ no_install=no
-+ objs=
-+ prefer_static_libs=no
-+ preload=no
-+ prev=
-+ prevarg=
-+ release=
-+ rpath=
-+ xrpath=
-+ perm_rpath=
-+ temp_rpath=
-+ thread_safe=no
-+ vinfo=
-+
-+ # We need to know -static, to get the right output filenames.
-+ for arg
-+ do
-+ case $arg in
-+ -all-static | -static)
-+ if test "X$arg" = "X-all-static"; then
-+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-+ fi
-+ if test -n "$link_static_flag"; then
-+ dlopen_self=$dlopen_self_static
-+ fi
-+ else
-+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
-+ dlopen_self=$dlopen_self_static
-+ fi
-+ fi
-+ build_libtool_libs=no
-+ build_old_libs=yes
-+ prefer_static_libs=yes
-+ break
-+ ;;
-+ esac
-+ done
-+
-+ # See if our shared archives depend on static archives.
-+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-+
-+ # Go through the arguments, transforming them on the way.
-+ while test $# -gt 0; do
-+ arg="$1"
-+ shift
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-+ ;;
-+ *) qarg=$arg ;;
-+ esac
-+ libtool_args="$libtool_args $qarg"
-+
-+ # If the previous option needs an argument, assign it.
-+ if test -n "$prev"; then
-+ case $prev in
-+ output)
-+ compile_command="$compile_command @OUTPUT@"
-+ finalize_command="$finalize_command @OUTPUT@"
-+ ;;
-+ esac
-+
-+ case $prev in
-+ dlfiles|dlprefiles)
-+ if test "$preload" = no; then
-+ # Add the symbol object into the linking commands.
-+ compile_command="$compile_command @SYMFILE@"
-+ finalize_command="$finalize_command @SYMFILE@"
-+ preload=yes
-+ fi
-+ case $arg in
-+ *.la | *.lo) ;; # We handle these cases below.
-+ force)
-+ if test "$dlself" = no; then
-+ dlself=needless
-+ export_dynamic=yes
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ self)
-+ if test "$prev" = dlprefiles; then
-+ dlself=yes
-+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-+ dlself=yes
-+ else
-+ dlself=needless
-+ export_dynamic=yes
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ *)
-+ if test "$prev" = dlfiles; then
-+ dlfiles="$dlfiles $arg"
-+ else
-+ dlprefiles="$dlprefiles $arg"
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ esac
-+ ;;
-+ expsyms)
-+ export_symbols="$arg"
-+ if test ! -f "$arg"; then
-+ $echo "$modename: symbol file \`$arg' does not exist"
-+ exit 1
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ expsyms_regex)
-+ export_symbols_regex="$arg"
-+ prev=
-+ continue
-+ ;;
-+ release)
-+ release="-$arg"
-+ prev=
-+ continue
-+ ;;
-+ rpath | xrpath)
-+ # We need an absolute path.
-+ case $arg in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ $echo "$modename: only absolute run-paths are allowed" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ if test "$prev" = rpath; then
-+ case "$rpath " in
-+ *" $arg "*) ;;
-+ *) rpath="$rpath $arg" ;;
-+ esac
-+ else
-+ case "$xrpath " in
-+ *" $arg "*) ;;
-+ *) xrpath="$xrpath $arg" ;;
-+ esac
-+ fi
-+ prev=
-+ continue
-+ ;;
-+ xcompiler)
-+ compiler_flags="$compiler_flags $qarg"
-+ prev=
-+ compile_command="$compile_command $qarg"
-+ finalize_command="$finalize_command $qarg"
-+ continue
-+ ;;
-+ xlinker)
-+ linker_flags="$linker_flags $qarg"
-+ compiler_flags="$compiler_flags $wl$qarg"
-+ prev=
-+ compile_command="$compile_command $wl$qarg"
-+ finalize_command="$finalize_command $wl$qarg"
-+ continue
-+ ;;
-+ *)
-+ eval "$prev=\"\$arg\""
-+ prev=
-+ continue
-+ ;;
-+ esac
-+ fi # test -n $prev
-+
-+ prevarg="$arg"
-+
-+ case $arg in
-+ -all-static)
-+ if test -n "$link_static_flag"; then
-+ compile_command="$compile_command $link_static_flag"
-+ finalize_command="$finalize_command $link_static_flag"
-+ fi
-+ continue
-+ ;;
-+
-+ -allow-undefined)
-+ # FIXME: remove this flag sometime in the future.
-+ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-+ continue
-+ ;;
-+
-+ -avoid-version)
-+ avoid_version=yes
-+ continue
-+ ;;
-+
-+ -dlopen)
-+ prev=dlfiles
-+ continue
-+ ;;
-+
-+ -dlpreopen)
-+ prev=dlprefiles
-+ continue
-+ ;;
-+
-+ -export-dynamic)
-+ export_dynamic=yes
-+ continue
-+ ;;
-+
-+ -export-symbols | -export-symbols-regex)
-+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-+ $echo "$modename: more than one -exported-symbols argument is not allowed"
-+ exit 1
-+ fi
-+ if test "X$arg" = "X-export-symbols"; then
-+ prev=expsyms
-+ else
-+ prev=expsyms_regex
-+ fi
-+ continue
-+ ;;
-+
-+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-+ # so, if we see these flags be careful not to treat them like -L
-+ -L[A-Z][A-Z]*:*)
-+ case $with_gcc/$host in
-+ no/*-*-irix* | no/*-*-nonstopux*)
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -L*)
-+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ absdir=`cd "$dir" && pwd`
-+ if test -z "$absdir"; then
-+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-+ exit 1
-+ fi
-+ dir="$absdir"
-+ ;;
-+ esac
-+ case "$deplibs " in
-+ *" -L$dir "*) ;;
-+ *)
-+ deplibs="$deplibs -L$dir"
-+ lib_search_path="$lib_search_path $dir"
-+ ;;
-+ esac
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ case :$dllsearchpath: in
-+ *":$dir:"*) ;;
-+ *) dllsearchpath="$dllsearchpath:$dir";;
-+ esac
-+ ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -l*)
-+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-+ case $host in
-+ *-*-cygwin* | *-*-pw32* | *-*-beos*)
-+ # These systems don't actually have a C or math library (as such)
-+ continue
-+ ;;
-+ *-*-mingw* | *-*-os2*)
-+ # These systems don't actually have a C library (as such)
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-openbsd* | *-*-freebsd*)
-+ # Do not include libc due to us having libc/libc_r.
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ esac
-+ elif test "X$arg" = "X-lc_r"; then
-+ case $host in
-+ *-*-openbsd* | *-*-freebsd*)
-+ # Do not include libc_r directly, use -pthread flag.
-+ continue
-+ ;;
-+ esac
-+ fi
-+ deplibs="$deplibs $arg"
-+ continue
-+ ;;
-+
-+ -module)
-+ module=yes
-+ continue
-+ ;;
-+
-+ -no-fast-install)
-+ fast_install=no
-+ continue
-+ ;;
-+
-+ -no-install)
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ # The PATH hackery in wrapper scripts is required on Windows
-+ # in order for the loader to find any dlls it needs.
-+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-+ fast_install=no
-+ ;;
-+ *) no_install=yes ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -no-undefined)
-+ allow_undefined=no
-+ continue
-+ ;;
-+
-+ -o) prev=output ;;
-+
-+ -release)
-+ prev=release
-+ continue
-+ ;;
-+
-+ -rpath)
-+ prev=rpath
-+ continue
-+ ;;
-+
-+ -R)
-+ prev=xrpath
-+ continue
-+ ;;
-+
-+ -R*)
-+ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ $echo "$modename: only absolute run-paths are allowed" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ case "$xrpath " in
-+ *" $dir "*) ;;
-+ *) xrpath="$xrpath $dir" ;;
-+ esac
-+ continue
-+ ;;
-+
-+ -static)
-+ # The effects of -static are defined in a previous loop.
-+ # We used to do the same as -all-static on platforms that
-+ # didn't have a PIC flag, but the assumption that the effects
-+ # would be equivalent was wrong. It would break on at least
-+ # Digital Unix and AIX.
-+ continue
-+ ;;
-+
-+ -thread-safe)
-+ thread_safe=yes
-+ continue
-+ ;;
-+
-+ -version-info)
-+ prev=vinfo
-+ continue
-+ ;;
-+
-+ -Wc,*)
-+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-+ arg=
-+ save_ifs="$IFS"; IFS=','
-+ for flag in $args; do
-+ IFS="$save_ifs"
-+ case $flag in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ flag="\"$flag\""
-+ ;;
-+ esac
-+ arg="$arg $wl$flag"
-+ compiler_flags="$compiler_flags $flag"
-+ done
-+ IFS="$save_ifs"
-+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-+ ;;
-+
-+ -Wl,*)
-+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-+ arg=
-+ save_ifs="$IFS"; IFS=','
-+ for flag in $args; do
-+ IFS="$save_ifs"
-+ case $flag in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ flag="\"$flag\""
-+ ;;
-+ esac
-+ arg="$arg $wl$flag"
-+ compiler_flags="$compiler_flags $wl$flag"
-+ linker_flags="$linker_flags $flag"
-+ done
-+ IFS="$save_ifs"
-+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-+ ;;
-+
-+ -Xcompiler)
-+ prev=xcompiler
-+ continue
-+ ;;
-+
-+ -Xlinker)
-+ prev=xlinker
-+ continue
-+ ;;
-+
-+ # Some other compiler flag.
-+ -* | +*)
-+ # Unknown arguments in both finalize_command and compile_command need
-+ # to be aesthetically quoted because they are evaled later.
-+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ ;;
-+
-+ *.lo | *.$objext)
-+ # A library or standard object.
-+ if test "$prev" = dlfiles; then
-+ # This file was specified with -dlopen.
-+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-+ dlfiles="$dlfiles $arg"
-+ prev=
-+ continue
-+ else
-+ # If libtool objects are unsupported, then we need to preload.
-+ prev=dlprefiles
-+ fi
-+ fi
-+
-+ if test "$prev" = dlprefiles; then
-+ # Preload the old-style object.
-+ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-+ prev=
-+ else
-+ case $arg in
-+ *.lo) libobjs="$libobjs $arg" ;;
-+ *) objs="$objs $arg" ;;
-+ esac
-+ fi
-+ ;;
-+
-+ *.$libext)
-+ # An archive.
-+ deplibs="$deplibs $arg"
-+ old_deplibs="$old_deplibs $arg"
-+ continue
-+ ;;
-+
-+ *.la)
-+ # A libtool-controlled library.
-+
-+ if test "$prev" = dlfiles; then
-+ # This library was specified with -dlopen.
-+ dlfiles="$dlfiles $arg"
-+ prev=
-+ elif test "$prev" = dlprefiles; then
-+ # The library was specified with -dlpreopen.
-+ dlprefiles="$dlprefiles $arg"
-+ prev=
-+ else
-+ deplibs="$deplibs $arg"
-+ fi
-+ continue
-+ ;;
-+
-+ # Some other compiler argument.
-+ *)
-+ # Unknown arguments in both finalize_command and compile_command need
-+ # to be aesthetically quoted because they are evaled later.
-+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ ;;
-+ esac # arg
-+
-+ # Now actually substitute the argument into the commands.
-+ if test -n "$arg"; then
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ fi
-+ done # argument parsing loop
-+
-+ if test -n "$prev"; then
-+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-+ eval arg=\"$export_dynamic_flag_spec\"
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ fi
-+
-+ # calculate the name of the file, without its directory
-+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-+ libobjs_save="$libobjs"
-+
-+ if test -n "$shlibpath_var"; then
-+ # get the directories listed in $shlibpath_var
-+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-+ else
-+ shlib_search_path=
-+ fi
-+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-+
-+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$output_objdir" = "X$output"; then
-+ output_objdir="$objdir"
-+ else
-+ output_objdir="$output_objdir/$objdir"
-+ fi
-+ # Create the object directory.
-+ if test ! -d $output_objdir; then
-+ $show "$mkdir $output_objdir"
-+ $run $mkdir $output_objdir
-+ status=$?
-+ if test $status -ne 0 && test ! -d $output_objdir; then
-+ exit $status
-+ fi
-+ fi
-+
-+ # Determine the type of output
-+ case $output in
-+ "")
-+ $echo "$modename: you must specify an output file" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ ;;
-+ *.$libext) linkmode=oldlib ;;
-+ *.lo | *.$objext) linkmode=obj ;;
-+ *.la) linkmode=lib ;;
-+ *) linkmode=prog ;; # Anything else should be a program.
-+ esac
-+
-+ specialdeplibs=
-+ libs=
-+ # Find all interdependent deplibs by searching for libraries
-+ # that are linked more than once (e.g. -la -lb -la)
-+ for deplib in $deplibs; do
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ libs="$libs $deplib"
-+ done
-+ deplibs=
-+ newdependency_libs=
-+ newlib_search_path=
-+ need_relink=no # whether we're linking any uninstalled libtool libraries
-+ notinst_deplibs= # not-installed libtool libraries
-+ notinst_path= # paths that contain not-installed libtool libraries
-+ case $linkmode in
-+ lib)
-+ passes="conv link"
-+ for file in $dlfiles $dlprefiles; do
-+ case $file in
-+ *.la) ;;
-+ *)
-+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ done
-+ ;;
-+ prog)
-+ compile_deplibs=
-+ finalize_deplibs=
-+ alldeplibs=no
-+ newdlfiles=
-+ newdlprefiles=
-+ passes="conv scan dlopen dlpreopen link"
-+ ;;
-+ *) passes="conv"
-+ ;;
-+ esac
-+ for pass in $passes; do
-+ if test $linkmode = prog; then
-+ # Determine which files to process
-+ case $pass in
-+ dlopen)
-+ libs="$dlfiles"
-+ save_deplibs="$deplibs" # Collect dlpreopened libraries
-+ deplibs=
-+ ;;
-+ dlpreopen) libs="$dlprefiles" ;;
-+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-+ esac
-+ fi
-+ for deplib in $libs; do
-+ lib=
-+ found=no
-+ case $deplib in
-+ -l*)
-+ if test $linkmode = oldlib && test $linkmode = obj; then
-+ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
-+ continue
-+ fi
-+ if test $pass = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ # Search the libtool library
-+ lib="$searchdir/lib${name}.la"
-+ if test -f "$lib"; then
-+ found=yes
-+ break
-+ fi
-+ done
-+ if test "$found" != yes; then
-+ # deplib doesn't seem to be a libtool library
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ deplibs="$deplib $deplibs"
-+ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ continue
-+ fi
-+ ;; # -l
-+ -L*)
-+ case $linkmode in
-+ lib)
-+ deplibs="$deplib $deplibs"
-+ test $pass = conv && continue
-+ newdependency_libs="$deplib $newdependency_libs"
-+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-+ ;;
-+ prog)
-+ if test $pass = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ if test $pass = scan; then
-+ deplibs="$deplib $deplibs"
-+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-+ else
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ fi
-+ ;;
-+ *)
-+ $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
-+ ;;
-+ esac # linkmode
-+ continue
-+ ;; # -L
-+ -R*)
-+ if test $pass = link; then
-+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-+ # Make sure the xrpath contains only unique directories.
-+ case "$xrpath " in
-+ *" $dir "*) ;;
-+ *) xrpath="$xrpath $dir" ;;
-+ esac
-+ fi
-+ deplibs="$deplib $deplibs"
-+ continue
-+ ;;
-+ *.la) lib="$deplib" ;;
-+ *.$libext)
-+ if test $pass = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ case $linkmode in
-+ lib)
-+ if test "$deplibs_check_method" != pass_all; then
-+ echo
-+ echo "*** Warning: Trying to link with static lib archive $deplib."
-+ echo "*** I have the capability to make that library automatically link in when"
-+ echo "*** you link to this library. But I can only do this if you have a"
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because the file extensions .$libext of this argument makes me believe"
-+ echo "*** that it is just a static archive that I should not used here."
-+ else
-+ echo
-+ echo "*** Warning: Linking the shared library $output against the"
-+ echo "*** static library $deplib is not portable!"
-+ deplibs="$deplib $deplibs"
-+ fi
-+ continue
-+ ;;
-+ prog)
-+ if test $pass != link; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ fi
-+ continue
-+ ;;
-+ esac # linkmode
-+ ;; # *.$libext
-+ *.lo | *.$objext)
-+ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-+ # If there is no dlopen support or we're linking statically,
-+ # we need to preload.
-+ newdlprefiles="$newdlprefiles $deplib"
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ newdlfiles="$newdlfiles $deplib"
-+ fi
-+ continue
-+ ;;
-+ %DEPLIBS%)
-+ alldeplibs=yes
-+ continue
-+ ;;
-+ esac # case $deplib
-+ if test $found = yes || test -f "$lib"; then :
-+ else
-+ $echo "$modename: cannot find the library \`$lib'" 1>&2
-+ exit 1
-+ fi
-+
-+ # Check to see that this really is a libtool archive.
-+ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ else
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ exit 1
-+ fi
-+
-+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$ladir" = "X$lib" && ladir="."
-+
-+ dlname=
-+ dlopen=
-+ dlpreopen=
-+ libdir=
-+ library_names=
-+ old_library=
-+ # If the library was installed with an old release of libtool,
-+ # it will not redefine variable installed.
-+ installed=yes
-+
-+ # Read the .la file
-+ case $lib in
-+ */* | *\\*) . $lib ;;
-+ *) . ./$lib ;;
-+ esac
-+
-+ if test "$linkmode,$pass" = "lib,link" ||
-+ test "$linkmode,$pass" = "prog,scan" ||
-+ { test $linkmode = oldlib && test $linkmode = obj; }; then
-+ # Add dl[pre]opened files of deplib
-+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-+ fi
-+
-+ if test $pass = conv; then
-+ # Only check for convenience libraries
-+ deplibs="$lib $deplibs"
-+ if test -z "$libdir"; then
-+ if test -z "$old_library"; then
-+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-+ exit 1
-+ fi
-+ # It is a libtool convenience library, so add in its objects.
-+ convenience="$convenience $ladir/$objdir/$old_library"
-+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ deplibs="$deplib $deplibs"
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done
-+ elif test $linkmode != prog && test $linkmode != lib; then
-+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
-+ exit 1
-+ fi
-+ continue
-+ fi # $pass = conv
-+
-+ # Get the name of the library we link against.
-+ linklib=
-+ for l in $old_library $library_names; do
-+ linklib="$l"
-+ done
-+ if test -z "$linklib"; then
-+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-+ exit 1
-+ fi
-+
-+ # This library was specified with -dlopen.
-+ if test $pass = dlopen; then
-+ if test -z "$libdir"; then
-+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-+ exit 1
-+ fi
-+ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-+ # If there is no dlname, no dlopen support or we're linking
-+ # statically, we need to preload.
-+ dlprefiles="$dlprefiles $lib"
-+ else
-+ newdlfiles="$newdlfiles $lib"
-+ fi
-+ continue
-+ fi # $pass = dlopen
-+
-+ # We need an absolute path.
-+ case $ladir in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-+ *)
-+ abs_ladir=`cd "$ladir" && pwd`
-+ if test -z "$abs_ladir"; then
-+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-+ abs_ladir="$ladir"
-+ fi
-+ ;;
-+ esac
-+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-+
-+ # Find the relevant object directory and library name.
-+ if test "X$installed" = Xyes; then
-+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-+ $echo "$modename: warning: library \`$lib' was moved." 1>&2
-+ dir="$ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ else
-+ dir="$libdir"
-+ absdir="$libdir"
-+ fi
-+ else
-+ dir="$ladir/$objdir"
-+ absdir="$abs_ladir/$objdir"
-+ # Remove this search path later
-+ notinst_path="$notinst_path $abs_ladir"
-+ fi # $installed = yes
-+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-+
-+ # This library was specified with -dlpreopen.
-+ if test $pass = dlpreopen; then
-+ if test -z "$libdir"; then
-+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-+ exit 1
-+ fi
-+ # Prefer using a static library (so that no silly _DYNAMIC symbols
-+ # are required to link).
-+ if test -n "$old_library"; then
-+ newdlprefiles="$newdlprefiles $dir/$old_library"
-+ # Otherwise, use the dlname, so that lt_dlopen finds it.
-+ elif test -n "$dlname"; then
-+ newdlprefiles="$newdlprefiles $dir/$dlname"
-+ else
-+ newdlprefiles="$newdlprefiles $dir/$linklib"
-+ fi
-+ fi # $pass = dlpreopen
-+
-+ if test -z "$libdir"; then
-+ # Link the convenience library
-+ if test $linkmode = lib; then
-+ deplibs="$dir/$old_library $deplibs"
-+ elif test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$dir/$old_library $compile_deplibs"
-+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
-+ else
-+ deplibs="$lib $deplibs"
-+ fi
-+ continue
-+ fi
-+
-+ if test $linkmode = prog && test $pass != link; then
-+ newlib_search_path="$newlib_search_path $ladir"
-+ deplibs="$lib $deplibs"
-+
-+ linkalldeplibs=no
-+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
-+ test "$build_libtool_libs" = no; then
-+ linkalldeplibs=yes
-+ fi
-+
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-+ esac
-+ # Need to link against all dependency_libs?
-+ if test $linkalldeplibs = yes; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ # Need to hardcode shared library paths
-+ # or/and link against static libraries
-+ newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done # for deplib
-+ continue
-+ fi # $linkmode = prog...
-+
-+ link_static=no # Whether the deplib will be linked statically
-+ if test -n "$library_names" &&
-+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-+ # Link against this shared library
-+
-+ if test "$linkmode,$pass" = "prog,link" ||
-+ { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
-+ # Hardcode the library path.
-+ # Skip directories that are in the system default run-time
-+ # search path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $absdir "*) ;;
-+ *)
-+ case "$compile_rpath " in
-+ *" $absdir "*) ;;
-+ *) compile_rpath="$compile_rpath $absdir"
-+ esac
-+ ;;
-+ esac
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *)
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir"
-+ esac
-+ ;;
-+ esac
-+ if test $linkmode = prog; then
-+ # We need to hardcode the library path
-+ if test -n "$shlibpath_var"; then
-+ # Make sure the rpath contains only unique directories.
-+ case "$temp_rpath " in
-+ *" $dir "*) ;;
-+ *" $absdir "*) ;;
-+ *) temp_rpath="$temp_rpath $dir" ;;
-+ esac
-+ fi
-+ fi
-+ fi # $linkmode,$pass = prog,link...
-+
-+ if test "$alldeplibs" = yes &&
-+ { test "$deplibs_check_method" = pass_all ||
-+ { test "$build_libtool_libs" = yes &&
-+ test -n "$library_names"; }; }; then
-+ # We only need to search for static libraries
-+ continue
-+ fi
-+
-+ if test "$installed" = no; then
-+ notinst_deplibs="$notinst_deplibs $lib"
-+ need_relink=yes
-+ fi
-+
-+ if test -n "$old_archive_from_expsyms_cmds"; then
-+ # figure out the soname
-+ set dummy $library_names
-+ realname="$2"
-+ shift; shift
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ # use dlname if we got it. it's perfectly good, no?
-+ if test -n "$dlname"; then
-+ soname="$dlname"
-+ elif test -n "$soname_spec"; then
-+ # bleh windows
-+ case $host in
-+ *cygwin*)
-+ major=`expr $current - $age`
-+ versuffix="-$major"
-+ ;;
-+ esac
-+ eval soname=\"$soname_spec\"
-+ else
-+ soname="$realname"
-+ fi
-+
-+ # Make a new name for the extract_expsyms_cmds to use
-+ soroot="$soname"
-+ soname=`echo $soroot | sed -e 's/^.*\///'`
-+ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
-+
-+ # If the library has no export list, then create one now
-+ if test -f "$output_objdir/$soname-def"; then :
-+ else
-+ $show "extracting exported symbol list from \`$soname'"
-+ save_ifs="$IFS"; IFS='~'
-+ eval cmds=\"$extract_expsyms_cmds\"
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ fi
-+
-+ # Create $newlib
-+ if test -f "$output_objdir/$newlib"; then :; else
-+ $show "generating import library for \`$soname'"
-+ save_ifs="$IFS"; IFS='~'
-+ eval cmds=\"$old_archive_from_expsyms_cmds\"
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ fi
-+ # make sure the library variables are pointing to the new library
-+ dir=$output_objdir
-+ linklib=$newlib
-+ fi # test -n $old_archive_from_expsyms_cmds
-+
-+ if test $linkmode = prog || test "$mode" != relink; then
-+ add_shlibpath=
-+ add_dir=
-+ add=
-+ lib_linked=yes
-+ case $hardcode_action in
-+ immediate | unsupported)
-+ if test "$hardcode_direct" = no; then
-+ add="$dir/$linklib"
-+ elif test "$hardcode_minus_L" = no; then
-+ case $host in
-+ *-*-sunos*) add_shlibpath="$dir" ;;
-+ esac
-+ add_dir="-L$dir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = no; then
-+ add_shlibpath="$dir"
-+ add="-l$name"
-+ else
-+ lib_linked=no
-+ fi
-+ ;;
-+ relink)
-+ if test "$hardcode_direct" = yes; then
-+ add="$dir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
-+ add_dir="-L$dir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
-+ add_shlibpath="$dir"
-+ add="-l$name"
-+ else
-+ lib_linked=no
-+ fi
-+ ;;
-+ *) lib_linked=no ;;
-+ esac
-+
-+ if test "$lib_linked" != yes; then
-+ $echo "$modename: configuration error: unsupported hardcode properties"
-+ exit 1
-+ fi
-+
-+ if test -n "$add_shlibpath"; then
-+ case :$compile_shlibpath: in
-+ *":$add_shlibpath:"*) ;;
-+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-+ esac
-+ fi
-+ if test $linkmode = prog; then
-+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
-+ else
-+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
-+ test -n "$add" && deplibs="$add $deplibs"
-+ if test "$hardcode_direct" != yes && \
-+ test "$hardcode_minus_L" != yes && \
-+ test "$hardcode_shlibpath_var" = yes; then
-+ case :$finalize_shlibpath: in
-+ *":$libdir:"*) ;;
-+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ esac
-+ fi
-+ fi
-+ fi
-+
-+ if test $linkmode = prog || test "$mode" = relink; then
-+ add_shlibpath=
-+ add_dir=
-+ add=
-+ # Finalize command for both is simple: just hardcode it.
-+ if test "$hardcode_direct" = yes; then
-+ add="$libdir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
-+ add_dir="-L$libdir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
-+ case :$finalize_shlibpath: in
-+ *":$libdir:"*) ;;
-+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ esac
-+ add="-l$name"
-+ else
-+ # We cannot seem to hardcode it, guess we'll fake it.
-+ if test "X$installed" = Xyes; then
-+ add_dir="-L$libdir"
-+ else
-+ add_dir="-L$DESTDIR$libdir"
-+ fi
-+ add="-l$name"
-+ fi
-+
-+ if test $linkmode = prog; then
-+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-+ else
-+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
-+ test -n "$add" && deplibs="$add $deplibs"
-+ fi
-+ fi
-+ elif test $linkmode = prog; then
-+ if test "$alldeplibs" = yes &&
-+ { test "$deplibs_check_method" = pass_all ||
-+ { test "$build_libtool_libs" = yes &&
-+ test -n "$library_names"; }; }; then
-+ # We only need to search for static libraries
-+ continue
-+ fi
-+
-+ # Try to link the static library
-+ # Here we assume that one of hardcode_direct or hardcode_minus_L
-+ # is not unsupported. This is valid on all known static and
-+ # shared platforms.
-+ if test "$hardcode_direct" != unsupported; then
-+ test -n "$old_library" && linklib="$old_library"
-+ compile_deplibs="$dir/$linklib $compile_deplibs"
-+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
-+ else
-+ compile_deplibs="-l$name -L$dir $compile_deplibs"
-+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-+ fi
-+ elif test "$build_libtool_libs" = yes; then
-+ # Not a shared library
-+ if test "$deplibs_check_method" != pass_all; then
-+ # We're trying link a shared library against a static one
-+ # but the system doesn't support it.
-+
-+ # Just print a warning and add the library to dependency_libs so
-+ # that the program can be linked against the static library.
-+ echo
-+ echo "*** Warning: This system can not link to static lib archive $lib."
-+ echo "*** I have the capability to make that library automatically link in when"
-+ echo "*** you link to this library. But I can only do this if you have a"
-+ echo "*** shared version of the library, which you do not appear to have."
-+ if test "$module" = yes; then
-+ echo "*** But as you try to build a module library, libtool will still create "
-+ echo "*** a static module, that should work as long as the dlopening application"
-+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-+ if test -z "$global_symbol_pipe"; then
-+ echo
-+ echo "*** However, this would only work if libtool was able to extract symbol"
-+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ echo "*** not find such a program. So, this module is probably useless."
-+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
-+ fi
-+ if test "$build_old_libs" = no; then
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ fi
-+ else
-+ convenience="$convenience $dir/$old_library"
-+ old_convenience="$old_convenience $dir/$old_library"
-+ deplibs="$dir/$old_library $deplibs"
-+ link_static=yes
-+ fi
-+ fi # link shared/static library?
-+
-+ if test $linkmode = lib; then
-+ if test -n "$dependency_libs" &&
-+ { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
-+ test $link_static = yes; }; then
-+ # Extract -R from dependency_libs
-+ temp_deplibs=
-+ for libdir in $dependency_libs; do
-+ case $libdir in
-+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-+ case " $xrpath " in
-+ *" $temp_xrpath "*) ;;
-+ *) xrpath="$xrpath $temp_xrpath";;
-+ esac;;
-+ *) temp_deplibs="$temp_deplibs $libdir";;
-+ esac
-+ done
-+ dependency_libs="$temp_deplibs"
-+ fi
-+
-+ newlib_search_path="$newlib_search_path $absdir"
-+ # Link against this library
-+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-+ # ... and its dependency_libs
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ newdependency_libs="$deplib $newdependency_libs"
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done
-+
-+ if test $link_all_deplibs != no; then
-+ # Add the search paths of all dependency libraries
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ -L*) path="$deplib" ;;
-+ *.la)
-+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$dir" = "X$deplib" && dir="."
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-+ *)
-+ absdir=`cd "$dir" && pwd`
-+ if test -z "$absdir"; then
-+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-+ absdir="$dir"
-+ fi
-+ ;;
-+ esac
-+ if grep "^installed=no" $deplib > /dev/null; then
-+ path="-L$absdir/$objdir"
-+ else
-+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+ exit 1
-+ fi
-+ if test "$absdir" != "$libdir"; then
-+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+ fi
-+ path="-L$absdir"
-+ fi
-+ ;;
-+ *) continue ;;
-+ esac
-+ case " $deplibs " in
-+ *" $path "*) ;;
-+ *) deplibs="$deplibs $path" ;;
-+ esac
-+ done
-+ fi # link_all_deplibs != no
-+ fi # linkmode = lib
-+ done # for deplib in $libs
-+ if test $pass = dlpreopen; then
-+ # Link the dlpreopened libraries before other libraries
-+ for deplib in $save_deplibs; do
-+ deplibs="$deplib $deplibs"
-+ done
-+ fi
-+ if test $pass != dlopen; then
-+ test $pass != scan && dependency_libs="$newdependency_libs"
-+ if test $pass != conv; then
-+ # Make sure lib_search_path contains only unique directories.
-+ lib_search_path=
-+ for dir in $newlib_search_path; do
-+ case "$lib_search_path " in
-+ *" $dir "*) ;;
-+ *) lib_search_path="$lib_search_path $dir" ;;
-+ esac
-+ done
-+ newlib_search_path=
-+ fi
-+
-+ if test "$linkmode,$pass" != "prog,link"; then
-+ vars="deplibs"
-+ else
-+ vars="compile_deplibs finalize_deplibs"
-+ fi
-+ for var in $vars dependency_libs; do
-+ # Add libraries to $var in reverse order
-+ eval tmp_libs=\"\$$var\"
-+ new_libs=
-+ for deplib in $tmp_libs; do
-+ case $deplib in
-+ -L*) new_libs="$deplib $new_libs" ;;
-+ *)
-+ case " $specialdeplibs " in
-+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
-+ *)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$deplib $new_libs" ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ tmp_libs=
-+ for deplib in $new_libs; do
-+ case $deplib in
-+ -L*)
-+ case " $tmp_libs " in
-+ *" $deplib "*) ;;
-+ *) tmp_libs="$tmp_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) tmp_libs="$tmp_libs $deplib" ;;
-+ esac
-+ done
-+ eval $var=\"$tmp_libs\"
-+ done # for var
-+ fi
-+ if test "$pass" = "conv" &&
-+ { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
-+ libs="$deplibs" # reset libs
-+ deplibs=
-+ fi
-+ done # for pass
-+ if test $linkmode = prog; then
-+ dlfiles="$newdlfiles"
-+ dlprefiles="$newdlprefiles"
-+ fi
-+
-+ case $linkmode in
-+ oldlib)
-+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-+ fi
-+
-+ if test -n "$rpath"; then
-+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-+ fi
-+
-+ if test -n "$xrpath"; then
-+ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-+ fi
-+
-+ if test -n "$vinfo"; then
-+ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-+ fi
-+
-+ if test -n "$release"; then
-+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-+ fi
-+
-+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-+ fi
-+
-+ # Now set the variables for building old libraries.
-+ build_libtool_libs=no
-+ oldlibs="$output"
-+ objs="$objs$old_deplibs"
-+ ;;
-+
-+ lib)
-+ # Make sure we only generate libraries of the form `libNAME.la'.
-+ case $outputname in
-+ lib*)
-+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-+ eval libname=\"$libname_spec\"
-+ ;;
-+ *)
-+ if test "$module" = no; then
-+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+ if test "$need_lib_prefix" != no; then
-+ # Add the "lib" prefix for modules if required
-+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-+ eval libname=\"$libname_spec\"
-+ else
-+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-+ fi
-+ ;;
-+ esac
-+
-+ if test -n "$objs"; then
-+ if test "$deplibs_check_method" != pass_all; then
-+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-+ exit 1
-+ else
-+ echo
-+ echo "*** Warning: Linking the shared library $output against the non-libtool"
-+ echo "*** objects $objs is not portable!"
-+ libobjs="$libobjs $objs"
-+ fi
-+ fi
-+
-+ if test "$dlself" != no; then
-+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-+ fi
-+
-+ set dummy $rpath
-+ if test $# -gt 2; then
-+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-+ fi
-+ install_libdir="$2"
-+
-+ oldlibs=
-+ if test -z "$rpath"; then
-+ if test "$build_libtool_libs" = yes; then
-+ # Building a libtool convenience library.
-+ libext=al
-+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
-+ build_libtool_libs=convenience
-+ build_old_libs=yes
-+ fi
-+
-+ if test -n "$vinfo"; then
-+ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-+ fi
-+
-+ if test -n "$release"; then
-+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-+ fi
-+ else
-+
-+ # Parse the version information argument.
-+ save_ifs="$IFS"; IFS=':'
-+ set dummy $vinfo 0 0 0
-+ IFS="$save_ifs"
-+
-+ if test -n "$8"; then
-+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ current="$2"
-+ revision="$3"
-+ age="$4"
-+
-+ # Check that each of the things are valid numbers.
-+ case $current in
-+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-+ *)
-+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ case $revision in
-+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-+ *)
-+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ case $age in
-+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-+ *)
-+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ if test $age -gt $current; then
-+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-+ exit 1
-+ fi
-+
-+ # Calculate the version variables.
-+ major=
-+ versuffix=
-+ verstring=
-+ case $version_type in
-+ none) ;;
-+
-+ darwin)
-+ # Like Linux, but with the current version available in
-+ # verstring for coding it into the library header
-+ major=.`expr $current - $age`
-+ versuffix="$major.$age.$revision"
-+ # Darwin ld doesn't like 0 for these options...
-+ minor_current=`expr $current + 1`
-+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-+ ;;
-+
-+ freebsd-aout)
-+ major=".$current"
-+ versuffix=".$current.$revision";
-+ ;;
-+
-+ freebsd-elf)
-+ major=".$current"
-+ versuffix=".$current";
-+ ;;
-+
-+ irix | nonstopux)
-+ case $version_type in
-+ nonstopux) verstring_prefix=nonstopux ;;
-+ *) verstring_prefix=sgi ;;
-+ esac
-+ verstring="$verstring_prefix$major.$revision"
-+
-+ major=`expr $current - $age + 1`
-+
-+ # Add in all the interfaces that we are compatible with.
-+ loop=$revision
-+ while test $loop != 0; do
-+ iface=`expr $revision - $loop`
-+ loop=`expr $loop - 1`
-+ verstring="$verstring_prefix$major.$iface:$verstring"
-+ done
-+
-+ # Before this point, $major must not contain `.'.
-+ major=.$major
-+ versuffix="$major.$revision"
-+ ;;
-+
-+ linux)
-+ major=.`expr $current - $age`
-+ versuffix="$major.$age.$revision"
-+ ;;
-+
-+ osf)
-+ major=`expr $current - $age`
-+ versuffix=".$current.$age.$revision"
-+ verstring="$current.$age.$revision"
-+
-+ # Add in all the interfaces that we are compatible with.
-+ loop=$age
-+ while test $loop != 0; do
-+ iface=`expr $current - $loop`
-+ loop=`expr $loop - 1`
-+ verstring="$verstring:${iface}.0"
-+ done
-+
-+ # Make executables depend on our current version.
-+ verstring="$verstring:${current}.0"
-+ ;;
-+
-+ sunos)
-+ major=".$current"
-+ versuffix=".$current.$revision"
-+ ;;
-+
-+ windows)
-+ # Use '-' rather than '.', since we only want one
-+ # extension on DOS 8.3 filesystems.
-+ major=`expr $current - $age`
-+ versuffix="-$major"
-+ ;;
-+
-+ *)
-+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
-+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ # Clear the version info if we defaulted, and they specified a release.
-+ if test -z "$vinfo" && test -n "$release"; then
-+ major=
-+ verstring="0.0"
-+ case $version_type in
-+ darwin)
-+ # we can't check for "0.0" in archive_cmds due to quoting
-+ # problems, so we reset it completely
-+ verstring=""
-+ ;;
-+ *)
-+ verstring="0.0"
-+ ;;
-+ esac
-+ if test "$need_version" = no; then
-+ versuffix=
-+ else
-+ versuffix=".0.0"
-+ fi
-+ fi
-+
-+ # Remove version info from name if versioning should be avoided
-+ if test "$avoid_version" = yes && test "$need_version" = no; then
-+ major=
-+ versuffix=
-+ verstring=""
-+ fi
-+
-+ # Check to see if the archive will have undefined symbols.
-+ if test "$allow_undefined" = yes; then
-+ if test "$allow_undefined_flag" = unsupported; then
-+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-+ build_libtool_libs=no
-+ build_old_libs=yes
-+ fi
-+ else
-+ # Don't allow undefined symbols.
-+ allow_undefined_flag="$no_undefined_flag"
-+ fi
-+ fi
-+
-+ if test "$mode" != relink; then
-+ # Remove our outputs.
-+ $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-+ $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
-+ fi
-+
-+ # Now set the variables for building old libraries.
-+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
-+
-+ # Transform .lo files to .o files.
-+ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-+ fi
-+
-+ # Eliminate all temporary directories.
-+ for path in $notinst_path; do
-+ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
-+ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
-+ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
-+ done
-+
-+ if test -n "$xrpath"; then
-+ # If the user specified any rpath flags, then add them.
-+ temp_xrpath=
-+ for libdir in $xrpath; do
-+ temp_xrpath="$temp_xrpath -R$libdir"
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ esac
-+ done
-+ if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
-+ dependency_libs="$temp_xrpath $dependency_libs"
-+ fi
-+ fi
-+
-+ # Make sure dlfiles contains only unique files that won't be dlpreopened
-+ old_dlfiles="$dlfiles"
-+ dlfiles=
-+ for lib in $old_dlfiles; do
-+ case " $dlprefiles $dlfiles " in
-+ *" $lib "*) ;;
-+ *) dlfiles="$dlfiles $lib" ;;
-+ esac
-+ done
-+
-+ # Make sure dlprefiles contains only unique files
-+ old_dlprefiles="$dlprefiles"
-+ dlprefiles=
-+ for lib in $old_dlprefiles; do
-+ case "$dlprefiles " in
-+ *" $lib "*) ;;
-+ *) dlprefiles="$dlprefiles $lib" ;;
-+ esac
-+ done
-+
-+ if test "$build_libtool_libs" = yes; then
-+ if test -n "$rpath"; then
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-+ # these systems don't actually have a c library (as such)!
-+ ;;
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # Rhapsody C library is in the System framework
-+ deplibs="$deplibs -framework System"
-+ ;;
-+ *-*-netbsd*)
-+ # Don't link with libc until the a.out ld.so is fixed.
-+ ;;
-+ *-*-openbsd* | *-*-freebsd*)
-+ # Do not include libc due to us having libc/libc_r.
-+ ;;
-+ *)
-+ # Add libc to deplibs on all other systems if necessary.
-+ if test $build_libtool_need_lc = "yes"; then
-+ deplibs="$deplibs -lc"
-+ fi
-+ ;;
-+ esac
-+ fi
-+
-+ # Transform deplibs into only deplibs that can be linked in shared.
-+ name_save=$name
-+ libname_save=$libname
-+ release_save=$release
-+ versuffix_save=$versuffix
-+ major_save=$major
-+ # I'm not sure if I'm treating the release correctly. I think
-+ # release should show up in the -l (ie -lgmp5) so we don't want to
-+ # add it in twice. Is that correct?
-+ release=""
-+ versuffix=""
-+ major=""
-+ newdeplibs=
-+ droppeddeps=no
-+ case $deplibs_check_method in
-+ pass_all)
-+ # Don't check for shared/static. Everything works.
-+ # This might be a little naive. We might want to check
-+ # whether the library exists or not. But this is on
-+ # osf3 & osf4 and I'm not really sure... Just
-+ # implementing what was already the behaviour.
-+ newdeplibs=$deplibs
-+ ;;
-+ test_compile)
-+ # This code stresses the "libraries are programs" paradigm to its
-+ # limits. Maybe even breaks it. We compile a program, linking it
-+ # against the deplibs as a proxy for the library. Then we can check
-+ # whether they linked in statically or dynamically with ldd.
-+ $rm conftest.c
-+ cat > conftest.c <<EOF
-+ int main() { return 0; }
-+ EOF
-+ $rm conftest
-+ $CC -o conftest conftest.c $deplibs
-+ if test $? -eq 0 ; then
-+ ldd_output=`ldd conftest`
-+ for i in $deplibs; do
-+ name="`expr $i : '-l\(.*\)'`"
-+ # If $name is empty we are operating on a -L argument.
-+ if test -n "$name" && test "$name" != "0"; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
-+ set dummy $deplib_matches
-+ deplib_match=$2
-+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+ newdeplibs="$newdeplibs $i"
-+ else
-+ droppeddeps=yes
-+ echo
-+ echo "*** Warning: dynamic linker does not accept needed library $i."
-+ echo "*** I have the capability to make that library automatically link in when"
-+ echo "*** you link to this library. But I can only do this if you have a"
-+ echo "*** shared version of the library, which I believe you do not have"
-+ echo "*** because a test_compile did reveal that the linker did not use it for"
-+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
-+ fi
-+ else
-+ newdeplibs="$newdeplibs $i"
-+ fi
-+ done
-+ else
-+ # Error occured in the first compile. Let's try to salvage
-+ # the situation: Compile a separate program for each library.
-+ for i in $deplibs; do
-+ name="`expr $i : '-l\(.*\)'`"
-+ # If $name is empty we are operating on a -L argument.
-+ if test -n "$name" && test "$name" != "0"; then
-+ $rm conftest
-+ $CC -o conftest conftest.c $i
-+ # Did it work?
-+ if test $? -eq 0 ; then
-+ ldd_output=`ldd conftest`
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
-+ set dummy $deplib_matches
-+ deplib_match=$2
-+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+ newdeplibs="$newdeplibs $i"
-+ else
-+ droppeddeps=yes
-+ echo
-+ echo "*** Warning: dynamic linker does not accept needed library $i."
-+ echo "*** I have the capability to make that library automatically link in when"
-+ echo "*** you link to this library. But I can only do this if you have a"
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because a test_compile did reveal that the linker did not use this one"
-+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-+ fi
-+ else
-+ droppeddeps=yes
-+ echo
-+ echo "*** Warning! Library $i is needed by this library but I was not able to"
-+ echo "*** make it link in! You will probably need to install it or some"
-+ echo "*** library that it depends on before this library will be fully"
-+ echo "*** functional. Installing it before continuing would be even better."
-+ fi
-+ else
-+ newdeplibs="$newdeplibs $i"
-+ fi
-+ done
-+ fi
-+ ;;
-+ file_magic*)
-+ set dummy $deplibs_check_method
-+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-+ for a_deplib in $deplibs; do
-+ name="`expr $a_deplib : '-l\(.*\)'`"
-+ # If $name is empty we are operating on a -L argument.
-+ if test -n "$name" && test "$name" != "0"; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ for potent_lib in $potential_libs; do
-+ # Follow soft links.
-+ if ls -lLd "$potent_lib" 2>/dev/null \
-+ | grep " -> " >/dev/null; then
-+ continue
-+ fi
-+ # The statement above tries to avoid entering an
-+ # endless loop below, in case of cyclic links.
-+ # We might still enter an endless loop, since a link
-+ # loop can be closed while we follow links,
-+ # but so what?
-+ potlib="$potent_lib"
-+ while test -h "$potlib" 2>/dev/null; do
-+ potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-+ case $potliblink in
-+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-+ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-+ esac
-+ done
-+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-+ | sed 10q \
-+ | egrep "$file_magic_regex" > /dev/null; then
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ break 2
-+ fi
-+ done
-+ done
-+ if test -n "$a_deplib" ; then
-+ droppeddeps=yes
-+ echo
-+ echo "*** Warning: linker path does not have real file for library $a_deplib."
-+ echo "*** I have the capability to make that library automatically link in when"
-+ echo "*** you link to this library. But I can only do this if you have a"
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ echo "*** with $libname but no candidates were found. (...for file magic test)"
-+ else
-+ echo "*** with $libname and none of the candidates passed a file format test"
-+ echo "*** using a file magic. Last file checked: $potlib"
-+ fi
-+ fi
-+ else
-+ # Add a -L argument.
-+ newdeplibs="$newdeplibs $a_deplib"
-+ fi
-+ done # Gone through all deplibs.
-+ ;;
-+ match_pattern*)
-+ set dummy $deplibs_check_method
-+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-+ for a_deplib in $deplibs; do
-+ name="`expr $a_deplib : '-l\(.*\)'`"
-+ # If $name is empty we are operating on a -L argument.
-+ if test -n "$name" && test "$name" != "0"; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ for potent_lib in $potential_libs; do
-+ potlib="$potent_lib" # see symlink-check below in file_magic test
-+ if eval echo \"$potent_lib\" 2>/dev/null \
-+ | sed 10q \
-+ | egrep "$match_pattern_regex" > /dev/null; then
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ break 2
-+ fi
-+ done
-+ done
-+ if test -n "$a_deplib" ; then
-+ droppeddeps=yes
-+ echo
-+ echo "*** Warning: linker path does not have real file for library $a_deplib."
-+ echo "*** I have the capability to make that library automatically link in when"
-+ echo "*** you link to this library. But I can only do this if you have a"
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-+ else
-+ echo "*** with $libname and none of the candidates passed a file format test"
-+ echo "*** using a regex pattern. Last file checked: $potlib"
-+ fi
-+ fi
-+ else
-+ # Add a -L argument.
-+ newdeplibs="$newdeplibs $a_deplib"
-+ fi
-+ done # Gone through all deplibs.
-+ ;;
-+ none | unknown | *)
-+ newdeplibs=""
-+ if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-+ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
-+ grep . >/dev/null; then
-+ echo
-+ if test "X$deplibs_check_method" = "Xnone"; then
-+ echo "*** Warning: inter-library dependencies are not supported in this platform."
-+ else
-+ echo "*** Warning: inter-library dependencies are not known to be supported."
-+ fi
-+ echo "*** All declared inter-library dependencies are being dropped."
-+ droppeddeps=yes
-+ fi
-+ ;;
-+ esac
-+ versuffix=$versuffix_save
-+ major=$major_save
-+ release=$release_save
-+ libname=$libname_save
-+ name=$name_save
-+
-+ case $host in
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # On Rhapsody replace the C library is the System framework
-+ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ ;;
-+ esac
-+
-+ if test "$droppeddeps" = yes; then
-+ if test "$module" = yes; then
-+ echo
-+ echo "*** Warning: libtool could not satisfy all declared inter-library"
-+ echo "*** dependencies of module $libname. Therefore, libtool will create"
-+ echo "*** a static module, that should work as long as the dlopening"
-+ echo "*** application is linked with the -dlopen flag."
-+ if test -z "$global_symbol_pipe"; then
-+ echo
-+ echo "*** However, this would only work if libtool was able to extract symbol"
-+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ echo "*** not find such a program. So, this module is probably useless."
-+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
-+ fi
-+ if test "$build_old_libs" = no; then
-+ oldlibs="$output_objdir/$libname.$libext"
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ else
-+ echo "*** The inter-library dependencies that have been dropped here will be"
-+ echo "*** automatically added whenever a program is linked with this library"
-+ echo "*** or is declared to -dlopen it."
-+
-+ if test $allow_undefined = no; then
-+ echo
-+ echo "*** Since this library must not contain undefined symbols,"
-+ echo "*** because either the platform does not support them or"
-+ echo "*** it was explicitly requested with -no-undefined,"
-+ echo "*** libtool will only create a static version of it."
-+ if test "$build_old_libs" = no; then
-+ oldlibs="$output_objdir/$libname.$libext"
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ fi
-+ fi
-+ fi
-+ # Done checking deplibs!
-+ deplibs=$newdeplibs
-+ fi
-+
-+ # All the library-specific variables (install_libdir is set above).
-+ library_names=
-+ old_library=
-+ dlname=
-+
-+ # Test again, we may have decided not to build it any more
-+ if test "$build_libtool_libs" = yes; then
-+ if test $hardcode_into_libs = yes; then
-+ # Hardcode the library paths
-+ hardcode_libdirs=
-+ dep_rpath=
-+ rpath="$finalize_rpath"
-+ test "$mode" != relink && rpath="$compile_rpath$rpath"
-+ for libdir in $rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ dep_rpath="$dep_rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) perm_rpath="$perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-+ fi
-+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-+ fi
-+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-+ fi
-+
-+ shlibpath="$finalize_shlibpath"
-+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-+ if test -n "$shlibpath"; then
-+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-+ fi
-+
-+ # Get the real and link names of the library.
-+ eval library_names=\"$library_names_spec\"
-+ set dummy $library_names
-+ realname="$2"
-+ shift; shift
-+
-+ if test -n "$soname_spec"; then
-+ eval soname=\"$soname_spec\"
-+ else
-+ soname="$realname"
-+ fi
-+ test -z "$dlname" && dlname=$soname
-+
-+ lib="$output_objdir/$realname"
-+ for link
-+ do
-+ linknames="$linknames $link"
-+ done
-+
-+ # Ensure that we have .o objects for linkers which dislike .lo
-+ # (e.g. aix) in case we are running --disable-static
-+ for obj in $libobjs; do
-+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$obj"; then
-+ xdir="."
-+ else
-+ xdir="$xdir"
-+ fi
-+ baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-+ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-+ if test ! -f $xdir/$oldobj; then
-+ $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-+ $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-+ fi
-+ done
-+
-+ # Use standard objects if they are pic
-+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+
-+ # Prepare the list of exported symbols
-+ if test -z "$export_symbols"; then
-+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-+ $show "generating symbol list for \`$libname.la'"
-+ export_symbols="$output_objdir/$libname.exp"
-+ $run $rm $export_symbols
-+ eval cmds=\"$export_symbols_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ if test -n "$export_symbols_regex"; then
-+ $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-+ $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-+ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-+ $run eval '$mv "${export_symbols}T" "$export_symbols"'
-+ fi
-+ fi
-+ fi
-+
-+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
-+ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-+ fi
-+
-+ if test -n "$convenience"; then
-+ if test -n "$whole_archive_flag_spec"; then
-+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-+ else
-+ gentop="$output_objdir/${outputname}x"
-+ $show "${rm}r $gentop"
-+ $run ${rm}r "$gentop"
-+ $show "mkdir $gentop"
-+ $run mkdir "$gentop"
-+ status=$?
-+ if test $status -ne 0 && test ! -d "$gentop"; then
-+ exit $status
-+ fi
-+ generated="$generated $gentop"
-+
-+ for xlib in $convenience; do
-+ # Extract the objects.
-+ case $xlib in
-+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-+ *) xabs=`pwd`"/$xlib" ;;
-+ esac
-+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-+ xdir="$gentop/$xlib"
-+
-+ $show "${rm}r $xdir"
-+ $run ${rm}r "$xdir"
-+ $show "mkdir $xdir"
-+ $run mkdir "$xdir"
-+ status=$?
-+ if test $status -ne 0 && test ! -d "$xdir"; then
-+ exit $status
-+ fi
-+ $show "(cd $xdir && $AR x $xabs)"
-+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-+
-+ libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-+ done
-+ fi
-+ fi
-+
-+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-+ eval flag=\"$thread_safe_flag_spec\"
-+ linker_flags="$linker_flags $flag"
-+ fi
-+
-+ # Make a backup of the uninstalled library when relinking
-+ if test "$mode" = relink; then
-+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-+ fi
-+
-+ # Do each of the archive commands.
-+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-+ eval cmds=\"$archive_expsym_cmds\"
-+ else
-+ eval cmds=\"$archive_cmds\"
-+ fi
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-+ exit 0
-+ fi
-+
-+ # Create links to the real library.
-+ for linkname in $linknames; do
-+ if test "$realname" != "$linkname"; then
-+ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-+ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-+ fi
-+ done
-+
-+ # If -module or -export-dynamic was specified, set the dlname.
-+ if test "$module" = yes || test "$export_dynamic" = yes; then
-+ # On all known operating systems, these are identical.
-+ dlname="$soname"
-+ fi
-+ fi
-+ ;;
-+
-+ obj)
-+ if test -n "$deplibs"; then
-+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-+ fi
-+
-+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-+ fi
-+
-+ if test -n "$rpath"; then
-+ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-+ fi
-+
-+ if test -n "$xrpath"; then
-+ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-+ fi
-+
-+ if test -n "$vinfo"; then
-+ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-+ fi
-+
-+ if test -n "$release"; then
-+ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-+ fi
-+
-+ case $output in
-+ *.lo)
-+ if test -n "$objs$old_deplibs"; then
-+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-+ exit 1
-+ fi
-+ libobj="$output"
-+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-+ ;;
-+ *)
-+ libobj=
-+ obj="$output"
-+ ;;
-+ esac
-+
-+ # Delete the old objects.
-+ $run $rm $obj $libobj
-+
-+ # Objects from convenience libraries. This assumes
-+ # single-version convenience libraries. Whenever we create
-+ # different ones for PIC/non-PIC, this we'll have to duplicate
-+ # the extraction.
-+ reload_conv_objs=
-+ gentop=
-+ # reload_cmds runs $LD directly, so let us get rid of
-+ # -Wl from whole_archive_flag_spec
-+ wl=
-+
-+ if test -n "$convenience"; then
-+ if test -n "$whole_archive_flag_spec"; then
-+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-+ else
-+ gentop="$output_objdir/${obj}x"
-+ $show "${rm}r $gentop"
-+ $run ${rm}r "$gentop"
-+ $show "mkdir $gentop"
-+ $run mkdir "$gentop"
-+ status=$?
-+ if test $status -ne 0 && test ! -d "$gentop"; then
-+ exit $status
-+ fi
-+ generated="$generated $gentop"
-+
-+ for xlib in $convenience; do
-+ # Extract the objects.
-+ case $xlib in
-+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-+ *) xabs=`pwd`"/$xlib" ;;
-+ esac
-+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-+ xdir="$gentop/$xlib"
-+
-+ $show "${rm}r $xdir"
-+ $run ${rm}r "$xdir"
-+ $show "mkdir $xdir"
-+ $run mkdir "$xdir"
-+ status=$?
-+ if test $status -ne 0 && test ! -d "$xdir"; then
-+ exit $status
-+ fi
-+ $show "(cd $xdir && $AR x $xabs)"
-+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-+
-+ reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-+ done
-+ fi
-+ fi
-+
-+ # Create the old-style object.
-+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-+
-+ output="$obj"
-+ eval cmds=\"$reload_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+
-+ # Exit if we aren't doing a library object file.
-+ if test -z "$libobj"; then
-+ if test -n "$gentop"; then
-+ $show "${rm}r $gentop"
-+ $run ${rm}r $gentop
-+ fi
-+
-+ exit 0
-+ fi
-+
-+ if test "$build_libtool_libs" != yes; then
-+ if test -n "$gentop"; then
-+ $show "${rm}r $gentop"
-+ $run ${rm}r $gentop
-+ fi
-+
-+ # Create an invalid libtool object if no PIC, so that we don't
-+ # accidentally link it into a program.
-+ $show "echo timestamp > $libobj"
-+ $run eval "echo timestamp > $libobj" || exit $?
-+ exit 0
-+ fi
-+
-+ if test -n "$pic_flag" || test "$pic_mode" != default; then
-+ # Only do commands if we really have different PIC objects.
-+ reload_objs="$libobjs $reload_conv_objs"
-+ output="$libobj"
-+ eval cmds=\"$reload_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ else
-+ # Just create a symlink.
-+ $show $rm $libobj
-+ $run $rm $libobj
-+ xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$libobj"; then
-+ xdir="."
-+ else
-+ xdir="$xdir"
-+ fi
-+ baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-+ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-+ $show "(cd $xdir && $LN_S $oldobj $baseobj)"
-+ $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
-+ fi
-+
-+ if test -n "$gentop"; then
-+ $show "${rm}r $gentop"
-+ $run ${rm}r $gentop
-+ fi
-+
-+ exit 0
-+ ;;
-+
-+ prog)
-+ case $host in
-+ *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
-+ esac
-+ if test -n "$vinfo"; then
-+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-+ fi
-+
-+ if test -n "$release"; then
-+ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-+ fi
-+
-+ if test "$preload" = yes; then
-+ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-+ test "$dlopen_self_static" = unknown; then
-+ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-+ fi
-+ fi
-+
-+ case $host in
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # On Rhapsody replace the C library is the System framework
-+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ ;;
-+ esac
-+
-+ compile_command="$compile_command $compile_deplibs"
-+ finalize_command="$finalize_command $finalize_deplibs"
-+
-+ if test -n "$rpath$xrpath"; then
-+ # If the user specified any rpath flags, then add them.
-+ for libdir in $rpath $xrpath; do
-+ # This is the magic to use -rpath.
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ esac
-+ done
-+ fi
-+
-+ # Now hardcode the library paths
-+ rpath=
-+ hardcode_libdirs=
-+ for libdir in $compile_rpath $finalize_rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ rpath="$rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) perm_rpath="$perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ case :$dllsearchpath: in
-+ *":$libdir:"*) ;;
-+ *) dllsearchpath="$dllsearchpath:$libdir";;
-+ esac
-+ ;;
-+ esac
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ eval rpath=\" $hardcode_libdir_flag_spec\"
-+ fi
-+ compile_rpath="$rpath"
-+
-+ rpath=
-+ hardcode_libdirs=
-+ for libdir in $finalize_rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ rpath="$rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$finalize_perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ eval rpath=\" $hardcode_libdir_flag_spec\"
-+ fi
-+ finalize_rpath="$rpath"
-+
-+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
-+ # Transform all the library objects into standard objects.
-+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ fi
-+
-+ dlsyms=
-+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
-+ dlsyms="${outputname}S.c"
-+ else
-+ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-+ fi
-+ fi
-+
-+ if test -n "$dlsyms"; then
-+ case $dlsyms in
-+ "") ;;
-+ *.c)
-+ # Discover the nlist of each of the dlfiles.
-+ nlist="$output_objdir/${outputname}.nm"
-+
-+ $show "$rm $nlist ${nlist}S ${nlist}T"
-+ $run $rm "$nlist" "${nlist}S" "${nlist}T"
-+
-+ # Parse the name list into a source file.
-+ $show "creating $output_objdir/$dlsyms"
-+
-+ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-+ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-+ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-+
-+ #ifdef __cplusplus
-+ extern \"C\" {
-+ #endif
-+
-+ /* Prevent the only kind of declaration conflicts we can make. */
-+ #define lt_preloaded_symbols some_other_symbol
-+
-+ /* External symbol declarations for the compiler. */\
-+ "
-+
-+ if test "$dlself" = yes; then
-+ $show "generating symbol list for \`$output'"
-+
-+ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-+
-+ # Add our own program objects to the symbol list.
-+ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ for arg in $progfiles; do
-+ $show "extracting global C symbols from \`$arg'"
-+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-+ done
-+
-+ if test -n "$exclude_expsyms"; then
-+ $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-+ $run eval '$mv "$nlist"T "$nlist"'
-+ fi
-+
-+ if test -n "$export_symbols_regex"; then
-+ $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-+ $run eval '$mv "$nlist"T "$nlist"'
-+ fi
-+
-+ # Prepare the list of exported symbols
-+ if test -z "$export_symbols"; then
-+ export_symbols="$output_objdir/$output.exp"
-+ $run $rm $export_symbols
-+ $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-+ else
-+ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-+ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-+ $run eval 'mv "$nlist"T "$nlist"'
-+ fi
-+ fi
-+
-+ for arg in $dlprefiles; do
-+ $show "extracting global C symbols from \`$arg'"
-+ name=`echo "$arg" | sed -e 's%^.*/%%'`
-+ $run eval 'echo ": $name " >> "$nlist"'
-+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-+ done
-+
-+ if test -z "$run"; then
-+ # Make sure we have at least an empty file.
-+ test -f "$nlist" || : > "$nlist"
-+
-+ if test -n "$exclude_expsyms"; then
-+ egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-+ $mv "$nlist"T "$nlist"
-+ fi
-+
-+ # Try sorting and uniquifying the output.
-+ if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-+ :
-+ else
-+ grep -v "^: " < "$nlist" > "$nlist"S
-+ fi
-+
-+ if test -f "$nlist"S; then
-+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-+ else
-+ echo '/* NONE */' >> "$output_objdir/$dlsyms"
-+ fi
-+
-+ $echo >> "$output_objdir/$dlsyms" "\
-+
-+ #undef lt_preloaded_symbols
-+
-+ #if defined (__STDC__) && __STDC__
-+ # define lt_ptr void *
-+ #else
-+ # define lt_ptr char *
-+ # define const
-+ #endif
-+
-+ /* The mapping between symbol names and symbols. */
-+ const struct {
-+ const char *name;
-+ lt_ptr address;
-+ }
-+ lt_preloaded_symbols[] =
-+ {\
-+ "
-+
-+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-+
-+ $echo >> "$output_objdir/$dlsyms" "\
-+ {0, (lt_ptr) 0}
-+ };
-+
-+ /* This works around a problem in FreeBSD linker */
-+ #ifdef FREEBSD_WORKAROUND
-+ static const void *lt_preloaded_setup() {
-+ return lt_preloaded_symbols;
-+ }
-+ #endif
-+
-+ #ifdef __cplusplus
-+ }
-+ #endif\
-+ "
-+ fi
-+
-+ pic_flag_for_symtable=
-+ case $host in
-+ # compiling the symbol table file with pic_flag works around
-+ # a FreeBSD bug that causes programs to crash when -lm is
-+ # linked before any other PIC object. But we must not use
-+ # pic_flag when linking with -static. The problem exists in
-+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-+ case "$compile_command " in
-+ *" -static "*) ;;
-+ *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
-+ esac;;
-+ *-*-hpux*)
-+ case "$compile_command " in
-+ *" -static "*) ;;
-+ *) pic_flag_for_symtable=" $pic_flag -DPIC";;
-+ esac
-+ esac
-+
-+ # Now compile the dynamic symbol file.
-+ $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-+ $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-+
-+ # Clean up the generated files.
-+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-+
-+ # Transform the symbol file into the correct name.
-+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ ;;
-+ *)
-+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ else
-+ # We keep going just in case the user didn't refer to
-+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
-+ # really was required.
-+
-+ # Nullify the symbol file.
-+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-+ fi
-+
-+ if test $need_relink = no || test "$build_libtool_libs" != yes; then
-+ # Replace the output file specification.
-+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-+ link_command="$compile_command$compile_rpath"
-+
-+ # We have no uninstalled library dependencies, so finalize right now.
-+ $show "$link_command"
-+ $run eval "$link_command"
-+ status=$?
-+
-+ # Delete the generated files.
-+ if test -n "$dlsyms"; then
-+ $show "$rm $output_objdir/${outputname}S.${objext}"
-+ $run $rm "$output_objdir/${outputname}S.${objext}"
-+ fi
-+
-+ exit $status
-+ fi
-+
-+ if test -n "$shlibpath_var"; then
-+ # We should set the shlibpath_var
-+ rpath=
-+ for dir in $temp_rpath; do
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*)
-+ # Absolute path.
-+ rpath="$rpath$dir:"
-+ ;;
-+ *)
-+ # Relative path: add a thisdir entry.
-+ rpath="$rpath\$thisdir/$dir:"
-+ ;;
-+ esac
-+ done
-+ temp_rpath="$rpath"
-+ fi
-+
-+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
-+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-+ fi
-+ if test -n "$finalize_shlibpath"; then
-+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-+ fi
-+
-+ compile_var=
-+ finalize_var=
-+ if test -n "$runpath_var"; then
-+ if test -n "$perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-+ fi
-+ if test -n "$finalize_perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $finalize_perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-+ fi
-+ fi
-+
-+ if test "$no_install" = yes; then
-+ # We don't need to create a wrapper script.
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ # Replace the output file specification.
-+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-+ # Delete the old output file.
-+ $run $rm $output
-+ # Link the executable and exit
-+ $show "$link_command"
-+ $run eval "$link_command" || exit $?
-+ exit 0
-+ fi
-+
-+ if test "$hardcode_action" = relink; then
-+ # Fast installation is not supported
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ relink_command="$finalize_var$finalize_command$finalize_rpath"
-+
-+ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-+ $echo "$modename: \`$output' will be relinked during installation" 1>&2
-+ else
-+ if test "$fast_install" != no; then
-+ link_command="$finalize_var$compile_command$finalize_rpath"
-+ if test "$fast_install" = yes; then
-+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-+ else
-+ # fast_install is set to needless
-+ relink_command=
-+ fi
-+ else
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ relink_command="$finalize_var$finalize_command$finalize_rpath"
-+ fi
-+ fi
-+
-+ # Replace the output file specification.
-+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-+
-+ # Delete the old output files.
-+ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-+
-+ $show "$link_command"
-+ $run eval "$link_command" || exit $?
-+
-+ # Now create the wrapper script.
-+ $show "creating $output"
-+
-+ # Quote the relink command for shipping.
-+ if test -n "$relink_command"; then
-+ # Preserve any variables that may affect compiler behavior
-+ for var in $variables_saved_for_relink; do
-+ if eval test -z \"\${$var+set}\"; then
-+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-+ elif eval var_value=\$$var; test -z "$var_value"; then
-+ relink_command="$var=; export $var; $relink_command"
-+ else
-+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
-+ fi
-+ done
-+ relink_command="(cd `pwd`; $relink_command)"
-+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-+ fi
-+
-+ # Quote $echo for shipping.
-+ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-+ case $0 in
-+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-+ *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-+ esac
-+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-+ else
-+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-+ fi
-+
-+ # Only actually do things if our run command is non-null.
-+ if test -z "$run"; then
-+ # win32 will think the script is a binary if it has
-+ # a .exe suffix, so we strip it off here.
-+ case $output in
-+ *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
-+ esac
-+ # test for cygwin because mv fails w/o .exe extensions
-+ case $host in
-+ *cygwin*) exeext=.exe ;;
-+ *) exeext= ;;
-+ esac
-+ $rm $output
-+ trap "$rm $output; exit 1" 1 2 15
-+
-+ $echo > $output "\
-+ #! $SHELL
-+
-+ # $output - temporary wrapper script for $objdir/$outputname
-+ # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-+ #
-+ # The $output program cannot be directly executed until all the libtool
-+ # libraries that it depends on are installed.
-+ #
-+ # This wrapper script should never be moved out of the build directory.
-+ # If it is, it will not operate correctly.
-+
-+ # Sed substitution that helps us do robust quoting. It backslashifies
-+ # metacharacters that are still active within double-quoted strings.
-+ Xsed='sed -e 1s/^X//'
-+ sed_quote_subst='$sed_quote_subst'
-+
-+ # The HP-UX ksh and POSIX shell print the target directory to stdout
-+ # if CDPATH is set.
-+ if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-+
-+ relink_command=\"$relink_command\"
-+
-+ # This environment variable determines our operation mode.
-+ if test \"\$libtool_install_magic\" = \"$magic\"; then
-+ # install mode needs the following variable:
-+ notinst_deplibs='$notinst_deplibs'
-+ else
-+ # When we are sourced in execute mode, \$file and \$echo are already set.
-+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
-+ echo=\"$qecho\"
-+ file=\"\$0\"
-+ # Make sure echo works.
-+ if test \"X\$1\" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-+ # Yippee, \$echo works!
-+ :
-+ else
-+ # Restart under the correct shell, and then maybe \$echo will work.
-+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-+ fi
-+ fi\
-+ "
-+ $echo >> $output "\
-+
-+ # Find the directory that this script lives in.
-+ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-+
-+ # Follow symbolic links until we get to the real thisdir.
-+ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
-+ while test -n \"\$file\"; do
-+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-+
-+ # If there was a directory component, then change thisdir.
-+ if test \"x\$destdir\" != \"x\$file\"; then
-+ case \"\$destdir\" in
-+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-+ *) thisdir=\"\$thisdir/\$destdir\" ;;
-+ esac
-+ fi
-+
-+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-+ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
-+ done
-+
-+ # Try to get the absolute directory name.
-+ absdir=\`cd \"\$thisdir\" && pwd\`
-+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
-+ "
-+
-+ if test "$fast_install" = yes; then
-+ echo >> $output "\
-+ program=lt-'$outputname'$exeext
-+ progdir=\"\$thisdir/$objdir\"
-+
-+ if test ! -f \"\$progdir/\$program\" || \\
-+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
-+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-+
-+ file=\"\$\$-\$program\"
-+
-+ if test ! -d \"\$progdir\"; then
-+ $mkdir \"\$progdir\"
-+ else
-+ $rm \"\$progdir/\$file\"
-+ fi"
-+
-+ echo >> $output "\
-+
-+ # relink executable if necessary
-+ if test -n \"\$relink_command\"; then
-+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-+ else
-+ $echo \"\$relink_command_output\" >&2
-+ $rm \"\$progdir/\$file\"
-+ exit 1
-+ fi
-+ fi
-+
-+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-+ { $rm \"\$progdir/\$program\";
-+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-+ $rm \"\$progdir/\$file\"
-+ fi"
-+ else
-+ echo >> $output "\
-+ program='$outputname'
-+ progdir=\"\$thisdir/$objdir\"
-+ "
-+ fi
-+
-+ echo >> $output "\
-+
-+ if test -f \"\$progdir/\$program\"; then"
-+
-+ # Export our shlibpath_var if we have one.
-+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-+ $echo >> $output "\
-+ # Add our own library path to $shlibpath_var
-+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-+
-+ # Some systems cannot cope with colon-terminated $shlibpath_var
-+ # The second colon is a workaround for a bug in BeOS R4 sed
-+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-+
-+ export $shlibpath_var
-+ "
-+ fi
-+
-+ # fixup the dll searchpath if we need to.
-+ if test -n "$dllsearchpath"; then
-+ $echo >> $output "\
-+ # Add the dll search path components to the executable PATH
-+ PATH=$dllsearchpath:\$PATH
-+ "
-+ fi
-+
-+ $echo >> $output "\
-+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
-+ # Run the actual program with our arguments.
-+ "
-+ case $host in
-+ # win32 systems need to use the prog path for dll
-+ # lookup to work
-+ *-*-cygwin* | *-*-pw32*)
-+ $echo >> $output "\
-+ exec \$progdir/\$program \${1+\"\$@\"}
-+ "
-+ ;;
-+
-+ # Backslashes separate directories on plain windows
-+ *-*-mingw | *-*-os2*)
-+ $echo >> $output "\
-+ exec \$progdir\\\\\$program \${1+\"\$@\"}
-+ "
-+ ;;
-+
-+ *)
-+ $echo >> $output "\
-+ # Export the path to the program.
-+ PATH=\"\$progdir:\$PATH\"
-+ export PATH
-+
-+ exec \$program \${1+\"\$@\"}
-+ "
-+ ;;
-+ esac
-+ $echo >> $output "\
-+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-+ exit 1
-+ fi
-+ else
-+ # The program doesn't exist.
-+ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
-+ echo \"See the $PACKAGE documentation for more information.\" 1>&2
-+ exit 1
-+ fi
-+ fi\
-+ "
-+ chmod +x $output
-+ fi
-+ exit 0
-+ ;;
-+ esac
-+
-+ # See if we need to build an old-fashioned archive.
-+ for oldlib in $oldlibs; do
-+
-+ if test "$build_libtool_libs" = convenience; then
-+ oldobjs="$libobjs_save"
-+ addlibs="$convenience"
-+ build_libtool_libs=no
-+ else
-+ if test "$build_libtool_libs" = module; then
-+ oldobjs="$libobjs_save"
-+ build_libtool_libs=no
-+ else
-+ oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
-+ fi
-+ addlibs="$old_convenience"
-+ fi
-+
-+ if test -n "$addlibs"; then
-+ gentop="$output_objdir/${outputname}x"
-+ $show "${rm}r $gentop"
-+ $run ${rm}r "$gentop"
-+ $show "mkdir $gentop"
-+ $run mkdir "$gentop"
-+ status=$?
-+ if test $status -ne 0 && test ! -d "$gentop"; then
-+ exit $status
-+ fi
-+ generated="$generated $gentop"
-+
-+ # Add in members from convenience archives.
-+ for xlib in $addlibs; do
-+ # Extract the objects.
-+ case $xlib in
-+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-+ *) xabs=`pwd`"/$xlib" ;;
-+ esac
-+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-+ xdir="$gentop/$xlib"
-+
-+ $show "${rm}r $xdir"
-+ $run ${rm}r "$xdir"
-+ $show "mkdir $xdir"
-+ $run mkdir "$xdir"
-+ status=$?
-+ if test $status -ne 0 && test ! -d "$xdir"; then
-+ exit $status
-+ fi
-+ $show "(cd $xdir && $AR x $xabs)"
-+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-+
-+ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-+ done
-+ fi
-+
-+ # Do each command in the archive commands.
-+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-+ eval cmds=\"$old_archive_from_new_cmds\"
-+ else
-+ # Ensure that we have .o objects in place in case we decided
-+ # not to build a shared library, and have fallen back to building
-+ # static libs even though --disable-static was passed!
-+ for oldobj in $oldobjs; do
-+ if test ! -f $oldobj; then
-+ xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$oldobj"; then
-+ xdir="."
-+ else
-+ xdir="$xdir"
-+ fi
-+ baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-+ obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-+ $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-+ $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
-+ fi
-+ done
-+
-+ eval cmds=\"$old_archive_cmds\"
-+ fi
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ done
-+
-+ if test -n "$generated"; then
-+ $show "${rm}r$generated"
-+ $run ${rm}r$generated
-+ fi
-+
-+ # Now create the libtool archive.
-+ case $output in
-+ *.la)
-+ old_library=
-+ test "$build_old_libs" = yes && old_library="$libname.$libext"
-+ $show "creating $output"
-+
-+ # Preserve any variables that may affect compiler behavior
-+ for var in $variables_saved_for_relink; do
-+ if eval test -z \"\${$var+set}\"; then
-+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-+ elif eval var_value=\$$var; test -z "$var_value"; then
-+ relink_command="$var=; export $var; $relink_command"
-+ else
-+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
-+ fi
-+ done
-+ # Quote the link command for shipping.
-+ relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)"
-+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-+
-+ # Only create the output if not a dry run.
-+ if test -z "$run"; then
-+ for installed in no yes; do
-+ if test "$installed" = yes; then
-+ if test -z "$install_libdir"; then
-+ break
-+ fi
-+ output="$output_objdir/$outputname"i
-+ # Replace all uninstalled libtool libraries with the installed ones
-+ newdependency_libs=
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ *.la)
-+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+ exit 1
-+ fi
-+ newdependency_libs="$newdependency_libs $libdir/$name"
-+ ;;
-+ *) newdependency_libs="$newdependency_libs $deplib" ;;
-+ esac
-+ done
-+ dependency_libs="$newdependency_libs"
-+ newdlfiles=
-+ for lib in $dlfiles; do
-+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ exit 1
-+ fi
-+ newdlfiles="$newdlfiles $libdir/$name"
-+ done
-+ dlfiles="$newdlfiles"
-+ newdlprefiles=
-+ for lib in $dlprefiles; do
-+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ exit 1
-+ fi
-+ newdlprefiles="$newdlprefiles $libdir/$name"
-+ done
-+ dlprefiles="$newdlprefiles"
-+ fi
-+ $rm $output
-+ # place dlname in correct position for cygwin
-+ tdlname=$dlname
-+ case $host,$output,$installed,$module,$dlname in
-+ *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-+ esac
-+ $echo > $output "\
-+ # $outputname - a libtool library file
-+ # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-+ #
-+ # Please DO NOT delete this file!
-+ # It is necessary for linking the library.
-+
-+ # The name that we can dlopen(3).
-+ dlname='$tdlname'
-+
-+ # Names of this library.
-+ library_names='$library_names'
-+
-+ # The name of the static archive.
-+ old_library='$old_library'
-+
-+ # Libraries that this one depends upon.
-+ dependency_libs='$dependency_libs'
-+
-+ # Version information for $libname.
-+ current=$current
-+ age=$age
-+ revision=$revision
-+
-+ # Is this an already installed library?
-+ installed=$installed
-+
-+ # Files to dlopen/dlpreopen
-+ dlopen='$dlfiles'
-+ dlpreopen='$dlprefiles'
-+
-+ # Directory that this library needs to be installed in:
-+ libdir='$install_libdir'"
-+ if test "$installed" = no && test $need_relink = yes; then
-+ $echo >> $output "\
-+ relink_command=\"$relink_command\""
-+ fi
-+ done
-+ fi
-+
-+ # Do a symbolic link so that the libtool archive can be found in
-+ # LD_LIBRARY_PATH before the program is installed.
-+ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-+ ;;
-+ esac
-+ exit 0
-+ ;;
-+
-+ # libtool install mode
-+ install)
-+ modename="$modename: install"
-+
-+ # There may be an optional sh(1) argument at the beginning of
-+ # install_prog (especially on Windows NT).
-+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-+ # Allow the use of GNU shtool's install command.
-+ $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
-+ # Aesthetically quote it.
-+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ install_prog="$arg "
-+ arg="$1"
-+ shift
-+ else
-+ install_prog=
-+ arg="$nonopt"
-+ fi
-+
-+ # The real first argument should be the name of the installation program.
-+ # Aesthetically quote it.
-+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ install_prog="$install_prog$arg"
-+
-+ # We need to accept at least all the BSD install flags.
-+ dest=
-+ files=
-+ opts=
-+ prev=
-+ install_type=
-+ isdir=no
-+ stripme=
-+ for arg
-+ do
-+ if test -n "$dest"; then
-+ files="$files $dest"
-+ dest="$arg"
-+ continue
-+ fi
-+
-+ case $arg in
-+ -d) isdir=yes ;;
-+ -f) prev="-f" ;;
-+ -g) prev="-g" ;;
-+ -m) prev="-m" ;;
-+ -o) prev="-o" ;;
-+ -s)
-+ stripme=" -s"
-+ continue
-+ ;;
-+ -*) ;;
-+
-+ *)
-+ # If the previous option needed an argument, then skip it.
-+ if test -n "$prev"; then
-+ prev=
-+ else
-+ dest="$arg"
-+ continue
-+ fi
-+ ;;
-+ esac
-+
-+ # Aesthetically quote the argument.
-+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ install_prog="$install_prog $arg"
-+ done
-+
-+ if test -z "$install_prog"; then
-+ $echo "$modename: you must specify an install program" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ if test -n "$prev"; then
-+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ if test -z "$files"; then
-+ if test -z "$dest"; then
-+ $echo "$modename: no file or destination specified" 1>&2
-+ else
-+ $echo "$modename: you must specify a destination" 1>&2
-+ fi
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ # Strip any trailing slash from the destination.
-+ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-+
-+ # Check to see that the destination is a directory.
-+ test -d "$dest" && isdir=yes
-+ if test "$isdir" = yes; then
-+ destdir="$dest"
-+ destname=
-+ else
-+ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$destdir" = "X$dest" && destdir=.
-+ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-+
-+ # Not a directory, so check to see that there is only one file specified.
-+ set dummy $files
-+ if test $# -gt 2; then
-+ $echo "$modename: \`$dest' is not a directory" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+ fi
-+ case $destdir in
-+ [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ *)
-+ for file in $files; do
-+ case $file in
-+ *.lo) ;;
-+ *)
-+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ # This variable tells wrapper scripts just to set variables rather
-+ # than running their programs.
-+ libtool_install_magic="$magic"
-+
-+ staticlibs=
-+ future_libdirs=
-+ current_libdirs=
-+ for file in $files; do
-+
-+ # Do each installation.
-+ case $file in
-+ *.$libext)
-+ # Do the static libraries later.
-+ staticlibs="$staticlibs $file"
-+ ;;
-+
-+ *.la)
-+ # Check to see that this really is a libtool archive.
-+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ else
-+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ library_names=
-+ old_library=
-+ relink_command=
-+ # If there is no directory component, then add one.
-+ case $file in
-+ */* | *\\*) . $file ;;
-+ *) . ./$file ;;
-+ esac
-+
-+ # Add the libdir to current_libdirs if it is the destination.
-+ DESTDIR=
-+ if test "X$destdir" = "X$libdir"; then
-+ case "$current_libdirs " in
-+ *" $libdir "*) ;;
-+ *) current_libdirs="$current_libdirs $libdir" ;;
-+ esac
-+ else
-+ case "$destdir" in
-+ *"$libdir")
-+ DESTDIR=`$echo "$destdir" | sed -e 's!'"$libdir"'$!!'`
-+ if test "X$destdir" != "X$DESTDIR$libdir"; then
-+ DESTDIR=
-+ fi
-+ ;;
-+ esac
-+ # Note the libdir as a future libdir.
-+ case "$future_libdirs " in
-+ *" $libdir "*) ;;
-+ *) future_libdirs="$future_libdirs $libdir" ;;
-+ esac
-+ fi
-+
-+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-+ test "X$dir" = "X$file/" && dir=
-+ dir="$dir$objdir"
-+
-+ if test -n "$relink_command"; then
-+ $echo "$modename: warning: relinking \`$file'" 1>&2
-+ export DESTDIR
-+ $show "$relink_command"
-+ if $run eval "$relink_command"; then :
-+ else
-+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-+ continue
-+ fi
-+ fi
-+ unset DESTDIR
-+
-+ # See the names of the shared library.
-+ set dummy $library_names
-+ if test -n "$2"; then
-+ realname="$2"
-+ shift
-+ shift
-+
-+ srcname="$realname"
-+ test -n "$relink_command" && srcname="$realname"T
-+
-+ # Install the shared library and build the symlinks.
-+ $show "$install_prog $dir/$srcname $destdir/$realname"
-+ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-+ if test -n "$stripme" && test -n "$striplib"; then
-+ $show "$striplib $destdir/$realname"
-+ $run eval "$striplib $destdir/$realname" || exit $?
-+ fi
-+
-+ if test $# -gt 0; then
-+ # Delete the old symlinks, and create new ones.
-+ for linkname
-+ do
-+ if test "$linkname" != "$realname"; then
-+ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-+ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-+ fi
-+ done
-+ fi
-+
-+ # Do each command in the postinstall commands.
-+ lib="$destdir/$realname"
-+ eval cmds=\"$postinstall_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ fi
-+
-+ # Install the pseudo-library for information purposes.
-+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+ instname="$dir/$name"i
-+ $show "$install_prog $instname $destdir/$name"
-+ $run eval "$install_prog $instname $destdir/$name" || exit $?
-+
-+ # Maybe install the static library, too.
-+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-+ ;;
-+
-+ *.lo)
-+ # Install (i.e. copy) a libtool object.
-+
-+ # Figure out destination file name, if it wasn't already specified.
-+ if test -n "$destname"; then
-+ destfile="$destdir/$destname"
-+ else
-+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+ destfile="$destdir/$destfile"
-+ fi
-+
-+ # Deduce the name of the destination old-style object file.
-+ case $destfile in
-+ *.lo)
-+ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-+ ;;
-+ *.$objext)
-+ staticdest="$destfile"
-+ destfile=
-+ ;;
-+ *)
-+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ # Install the libtool object if requested.
-+ if test -n "$destfile"; then
-+ $show "$install_prog $file $destfile"
-+ $run eval "$install_prog $file $destfile" || exit $?
-+ fi
-+
-+ # Install the old object if enabled.
-+ if test "$build_old_libs" = yes; then
-+ # Deduce the name of the old-style object file.
-+ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-+
-+ $show "$install_prog $staticobj $staticdest"
-+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-+ fi
-+ exit 0
-+ ;;
-+
-+ *)
-+ # Figure out destination file name, if it wasn't already specified.
-+ if test -n "$destname"; then
-+ destfile="$destdir/$destname"
-+ else
-+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+ destfile="$destdir/$destfile"
-+ fi
-+
-+ # Do a test to see if this is really a libtool program.
-+ case $host in
-+ *cygwin*|*mingw*)
-+ wrapper=`echo $file | sed -e 's,.exe$,,'`
-+ ;;
-+ *)
-+ wrapper=$file
-+ ;;
-+ esac
-+ if (sed -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-+ notinst_deplibs=
-+ relink_command=
-+
-+ # If there is no directory component, then add one.
-+ case $file in
-+ */* | *\\*) . $wrapper ;;
-+ *) . ./$wrapper ;;
-+ esac
-+
-+ # Check the variables that should have been set.
-+ if test -z "$notinst_deplibs"; then
-+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-+ exit 1
-+ fi
-+
-+ finalize=yes
-+ for lib in $notinst_deplibs; do
-+ # Check to see that each library is installed.
-+ libdir=
-+ if test -f "$lib"; then
-+ # If there is no directory component, then add one.
-+ case $lib in
-+ */* | *\\*) . $lib ;;
-+ *) . ./$lib ;;
-+ esac
-+ fi
-+ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-+ if test -n "$libdir" && test ! -f "$libfile"; then
-+ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-+ finalize=no
-+ fi
-+ done
-+
-+ relink_command=
-+ # If there is no directory component, then add one.
-+ case $file in
-+ */* | *\\*) . $wrapper ;;
-+ *) . ./$wrapper ;;
-+ esac
-+
-+ outputname=
-+ if test "$fast_install" = no && test -n "$relink_command"; then
-+ if test "$finalize" = yes && test -z "$run"; then
-+ tmpdir="/tmp"
-+ test -n "$TMPDIR" && tmpdir="$TMPDIR"
-+ tmpdir="$tmpdir/libtool-$$"
-+ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-+ else
-+ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-+ continue
-+ fi
-+ file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+ outputname="$tmpdir/$file"
-+ # Replace the output file specification.
-+ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-+
-+ $show "$relink_command"
-+ if $run eval "$relink_command"; then :
-+ else
-+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-+ ${rm}r "$tmpdir"
-+ continue
-+ fi
-+ file="$outputname"
-+ else
-+ $echo "$modename: warning: cannot relink \`$file'" 1>&2
-+ fi
-+ else
-+ # Install the binary that we compiled earlier.
-+ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-+ fi
-+ fi
-+
-+ # remove .exe since cygwin /usr/bin/install will append another
-+ # one anyways
-+ case $install_prog,$host in
-+ /usr/bin/install*,*cygwin*)
-+ case $file:$destfile in
-+ *.exe:*.exe)
-+ # this is ok
-+ ;;
-+ *.exe:*)
-+ destfile=$destfile.exe
-+ ;;
-+ *:*.exe)
-+ destfile=`echo $destfile | sed -e 's,.exe$,,'`
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ $show "$install_prog$stripme $file $destfile"
-+ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-+ test -n "$outputname" && ${rm}r "$tmpdir"
-+ ;;
-+ esac
-+ done
-+
-+ for file in $staticlibs; do
-+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+
-+ # Set up the ranlib parameters.
-+ oldlib="$destdir/$name"
-+
-+ $show "$install_prog $file $oldlib"
-+ $run eval "$install_prog \$file \$oldlib" || exit $?
-+
-+ if test -n "$stripme" && test -n "$striplib"; then
-+ $show "$old_striplib $oldlib"
-+ $run eval "$old_striplib $oldlib" || exit $?
-+ fi
-+
-+ # Do each command in the postinstall commands.
-+ eval cmds=\"$old_postinstall_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ done
-+
-+ if test -n "$future_libdirs"; then
-+ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-+ fi
-+
-+ if test -n "$current_libdirs"; then
-+ # Maybe just do a dry run.
-+ test -n "$run" && current_libdirs=" -n$current_libdirs"
-+ exec_cmd='$SHELL $0 --finish$current_libdirs'
-+ else
-+ exit 0
-+ fi
-+ ;;
-+
-+ # libtool finish mode
-+ finish)
-+ modename="$modename: finish"
-+ libdirs="$nonopt"
-+ admincmds=
-+
-+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-+ for dir
-+ do
-+ libdirs="$libdirs $dir"
-+ done
-+
-+ for libdir in $libdirs; do
-+ if test -n "$finish_cmds"; then
-+ # Do each command in the finish commands.
-+ eval cmds=\"$finish_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || admincmds="$admincmds
-+ $cmd"
-+ done
-+ IFS="$save_ifs"
-+ fi
-+ if test -n "$finish_eval"; then
-+ # Do the single finish_eval.
-+ eval cmds=\"$finish_eval\"
-+ $run eval "$cmds" || admincmds="$admincmds
-+ $cmds"
-+ fi
-+ done
-+ fi
-+
-+ # Exit here if they wanted silent mode.
-+ test "$show" = ":" && exit 0
-+
-+ echo "----------------------------------------------------------------------"
-+ echo "Libraries have been installed in:"
-+ for libdir in $libdirs; do
-+ echo " $libdir"
-+ done
-+ echo
-+ echo "If you ever happen to want to link against installed libraries"
-+ echo "in a given directory, LIBDIR, you must either use libtool, and"
-+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-+ echo "flag during linking and do at least one of the following:"
-+ if test -n "$shlibpath_var"; then
-+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
-+ echo " during execution"
-+ fi
-+ if test -n "$runpath_var"; then
-+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
-+ echo " during linking"
-+ fi
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ libdir=LIBDIR
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+
-+ echo " - use the \`$flag' linker flag"
-+ fi
-+ if test -n "$admincmds"; then
-+ echo " - have your system administrator run these commands:$admincmds"
-+ fi
-+ if test -f /etc/ld.so.conf; then
-+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-+ fi
-+ echo
-+ echo "See any operating system documentation about shared libraries for"
-+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
-+ echo "----------------------------------------------------------------------"
-+ exit 0
-+ ;;
-+
-+ # libtool execute mode
-+ execute)
-+ modename="$modename: execute"
-+
-+ # The first argument is the command name.
-+ cmd="$nonopt"
-+ if test -z "$cmd"; then
-+ $echo "$modename: you must specify a COMMAND" 1>&2
-+ $echo "$help"
-+ exit 1
-+ fi
-+
-+ # Handle -dlopen flags immediately.
-+ for file in $execute_dlfiles; do
-+ if test ! -f "$file"; then
-+ $echo "$modename: \`$file' is not a file" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ dir=
-+ case $file in
-+ *.la)
-+ # Check to see that this really is a libtool archive.
-+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ else
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ # Read the libtool library.
-+ dlname=
-+ library_names=
-+
-+ # If there is no directory component, then add one.
-+ case $file in
-+ */* | *\\*) . $file ;;
-+ *) . ./$file ;;
-+ esac
-+
-+ # Skip this library if it cannot be dlopened.
-+ if test -z "$dlname"; then
-+ # Warn if it was a shared library.
-+ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-+ continue
-+ fi
-+
-+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$dir" = "X$file" && dir=.
-+
-+ if test -f "$dir/$objdir/$dlname"; then
-+ dir="$dir/$objdir"
-+ else
-+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-+ exit 1
-+ fi
-+ ;;
-+
-+ *.lo)
-+ # Just add the directory containing the .lo file.
-+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$dir" = "X$file" && dir=.
-+ ;;
-+
-+ *)
-+ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-+ continue
-+ ;;
-+ esac
-+
-+ # Get the absolute pathname.
-+ absdir=`cd "$dir" && pwd`
-+ test -n "$absdir" && dir="$absdir"
-+
-+ # Now add the directory to shlibpath_var.
-+ if eval "test -z \"\$$shlibpath_var\""; then
-+ eval "$shlibpath_var=\"\$dir\""
-+ else
-+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-+ fi
-+ done
-+
-+ # This variable tells wrapper scripts just to set shlibpath_var
-+ # rather than running their programs.
-+ libtool_execute_magic="$magic"
-+
-+ # Check if any of the arguments is a wrapper script.
-+ args=
-+ for file
-+ do
-+ case $file in
-+ -*) ;;
-+ *)
-+ # Do a test to see if this is really a libtool program.
-+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ # If there is no directory component, then add one.
-+ case $file in
-+ */* | *\\*) . $file ;;
-+ *) . ./$file ;;
-+ esac
-+
-+ # Transform arg to wrapped name.
-+ file="$progdir/$program"
-+ fi
-+ ;;
-+ esac
-+ # Quote arguments (to preserve shell metacharacters).
-+ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-+ args="$args \"$file\""
-+ done
-+
-+ if test -z "$run"; then
-+ if test -n "$shlibpath_var"; then
-+ # Export the shlibpath_var.
-+ eval "export $shlibpath_var"
-+ fi
-+
-+ # Restore saved enviroment variables
-+ if test "${save_LC_ALL+set}" = set; then
-+ LC_ALL="$save_LC_ALL"; export LC_ALL
-+ fi
-+ if test "${save_LANG+set}" = set; then
-+ LANG="$save_LANG"; export LANG
-+ fi
-+
-+ # Now prepare to actually exec the command.
-+ exec_cmd="\$cmd$args"
-+ else
-+ # Display what would be done.
-+ if test -n "$shlibpath_var"; then
-+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-+ $echo "export $shlibpath_var"
-+ fi
-+ $echo "$cmd$args"
-+ exit 0
-+ fi
-+ ;;
-+
-+ # libtool clean and uninstall mode
-+ clean | uninstall)
-+ modename="$modename: $mode"
-+ rm="$nonopt"
-+ files=
-+ rmforce=
-+ exit_status=0
-+
-+ # This variable tells wrapper scripts just to set variables rather
-+ # than running their programs.
-+ libtool_install_magic="$magic"
-+
-+ for arg
-+ do
-+ case $arg in
-+ -f) rm="$rm $arg"; rmforce=yes ;;
-+ -*) rm="$rm $arg" ;;
-+ *) files="$files $arg" ;;
-+ esac
-+ done
-+
-+ if test -z "$rm"; then
-+ $echo "$modename: you must specify an RM program" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ fi
-+
-+ rmdirs=
-+
-+ for file in $files; do
-+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$dir" = "X$file"; then
-+ dir=.
-+ objdir="$objdir"
-+ else
-+ objdir="$dir/$objdir"
-+ fi
-+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+ test $mode = uninstall && objdir="$dir"
-+
-+ # Remember objdir for removal later, being careful to avoid duplicates
-+ if test $mode = clean; then
-+ case " $rmdirs " in
-+ *" $objdir "*) ;;
-+ *) rmdirs="$rmdirs $objdir" ;;
-+ esac
-+ fi
-+
-+ # Don't error if the file doesn't exist and rm -f was used.
-+ if (test -L "$file") >/dev/null 2>&1 \
-+ || (test -h "$file") >/dev/null 2>&1 \
-+ || test -f "$file"; then
-+ :
-+ elif test -d "$file"; then
-+ exit_status=1
-+ continue
-+ elif test "$rmforce" = yes; then
-+ continue
-+ fi
-+
-+ rmfiles="$file"
-+
-+ case $name in
-+ *.la)
-+ # Possibly a libtool archive, so verify it.
-+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ . $dir/$name
-+
-+ # Delete the libtool libraries and symlinks.
-+ for n in $library_names; do
-+ rmfiles="$rmfiles $objdir/$n"
-+ done
-+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-+ test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-+
-+ if test $mode = uninstall; then
-+ if test -n "$library_names"; then
-+ # Do each command in the postuninstall commands.
-+ eval cmds=\"$postuninstall_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd"
-+ if test $? != 0 && test "$rmforce" != yes; then
-+ exit_status=1
-+ fi
-+ done
-+ IFS="$save_ifs"
-+ fi
-+
-+ if test -n "$old_library"; then
-+ # Do each command in the old_postuninstall commands.
-+ eval cmds=\"$old_postuninstall_cmds\"
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd"
-+ if test $? != 0 && test "$rmforce" != yes; then
-+ exit_status=1
-+ fi
-+ done
-+ IFS="$save_ifs"
-+ fi
-+ # FIXME: should reinstall the best remaining shared library.
-+ fi
-+ fi
-+ ;;
-+
-+ *.lo)
-+ if test "$build_old_libs" = yes; then
-+ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-+ rmfiles="$rmfiles $dir/$oldobj"
-+ fi
-+ ;;
-+
-+ *)
-+ # Do a test to see if this is a libtool program.
-+ if test $mode = clean &&
-+ (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ relink_command=
-+ . $dir/$file
-+
-+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-+ if test "$fast_install" = yes && test -n "$relink_command"; then
-+ rmfiles="$rmfiles $objdir/lt-$name"
-+ fi
-+ fi
-+ ;;
-+ esac
-+ $show "$rm $rmfiles"
-+ $run $rm $rmfiles || exit_status=1
-+ done
-+
-+ # Try to remove the ${objdir}s in the directories where we deleted files
-+ for dir in $rmdirs; do
-+ if test -d "$dir"; then
-+ $show "rmdir $dir"
-+ $run rmdir $dir >/dev/null 2>&1
-+ fi
-+ done
-+
-+ exit $exit_status
-+ ;;
-+
-+ "")
-+ $echo "$modename: you must specify a MODE" 1>&2
-+ $echo "$generic_help" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ if test -z "$exec_cmd"; then
-+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
-+ $echo "$generic_help" 1>&2
-+ exit 1
-+ fi
-+ fi # test -z "$show_help"
-+
-+ if test -n "$exec_cmd"; then
-+ eval exec $exec_cmd
-+ exit 1
-+ fi
-+
-+ # We need to display help for each of the modes.
-+ case $mode in
-+ "") $echo \
-+ "Usage: $modename [OPTION]... [MODE-ARG]...
-+
-+ Provide generalized library-building support services.
-+
-+ --config show all configuration variables
-+ --debug enable verbose shell tracing
-+ -n, --dry-run display commands without modifying any files
-+ --features display basic configuration information and exit
-+ --finish same as \`--mode=finish'
-+ --help display this help message and exit
-+ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
-+ --quiet same as \`--silent'
-+ --silent don't print informational messages
-+ --version print version information
-+
-+ MODE must be one of the following:
-+
-+ clean remove files from the build directory
-+ compile compile a source file into a libtool object
-+ execute automatically set library path, then run a program
-+ finish complete the installation of libtool libraries
-+ install install libraries or executables
-+ link create a library or an executable
-+ uninstall remove libraries from an installed directory
-+
-+ MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-+ a more detailed description of MODE."
-+ exit 0
-+ ;;
-+
-+ clean)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-+
-+ Remove files from the build directory.
-+
-+ RM is the name of the program to use to delete files associated with each FILE
-+ (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-+ to RM.
-+
-+ If FILE is a libtool library, object or program, all the files associated
-+ with it are deleted. Otherwise, only FILE itself is deleted using RM."
-+ ;;
-+
-+ compile)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-+
-+ Compile a source file into a libtool library object.
-+
-+ This mode accepts the following additional options:
-+
-+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
-+ -prefer-pic try to building PIC objects only
-+ -prefer-non-pic try to building non-PIC objects only
-+ -static always build a \`.o' file suitable for static linking
-+
-+ COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-+ from the given SOURCEFILE.
-+
-+ The output file name is determined by removing the directory component from
-+ SOURCEFILE, then substituting the C source code suffix \`.c' with the
-+ library object suffix, \`.lo'."
-+ ;;
-+
-+ execute)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-+
-+ Automatically set library path, then run a program.
-+
-+ This mode accepts the following additional options:
-+
-+ -dlopen FILE add the directory containing FILE to the library path
-+
-+ This mode sets the library path environment variable according to \`-dlopen'
-+ flags.
-+
-+ If any of the ARGS are libtool executable wrappers, then they are translated
-+ into their corresponding uninstalled binary, and any of their required library
-+ directories are added to the library path.
-+
-+ Then, COMMAND is executed, with ARGS as arguments."
-+ ;;
-+
-+ finish)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-+
-+ Complete the installation of libtool libraries.
-+
-+ Each LIBDIR is a directory that contains libtool libraries.
-+
-+ The commands that this mode executes may require superuser privileges. Use
-+ the \`--dry-run' option if you just want to see what would be executed."
-+ ;;
-+
-+ install)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-+
-+ Install executables or libraries.
-+
-+ INSTALL-COMMAND is the installation command. The first component should be
-+ either the \`install' or \`cp' program.
-+
-+ The rest of the components are interpreted as arguments to that command (only
-+ BSD-compatible install options are recognized)."
-+ ;;
-+
-+ link)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-+
-+ Link object files or libraries together to form another library, or to
-+ create an executable program.
-+
-+ LINK-COMMAND is a command using the C compiler that you would use to create
-+ a program from several object files.
-+
-+ The following components of LINK-COMMAND are treated specially:
-+
-+ -all-static do not do any dynamic linking at all
-+ -avoid-version do not add a version suffix if possible
-+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-+ -export-symbols SYMFILE
-+ try to export only the symbols listed in SYMFILE
-+ -export-symbols-regex REGEX
-+ try to export only the symbols matching REGEX
-+ -LLIBDIR search LIBDIR for required installed libraries
-+ -lNAME OUTPUT-FILE requires the installed library libNAME
-+ -module build a library that can dlopened
-+ -no-fast-install disable the fast-install mode
-+ -no-install link a not-installable executable
-+ -no-undefined declare that a library does not refer to external symbols
-+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-+ -release RELEASE specify package release information
-+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
-+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-+ -static do not do any dynamic linking of libtool libraries
-+ -version-info CURRENT[:REVISION[:AGE]]
-+ specify library version info [each variable defaults to 0]
-+
-+ All other options (arguments beginning with \`-') are ignored.
-+
-+ Every other argument is treated as a filename. Files ending in \`.la' are
-+ treated as uninstalled libtool libraries, other files are standard or library
-+ object files.
-+
-+ If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-+ only library objects (\`.lo' files) may be specified, and \`-rpath' is
-+ required, except when creating a convenience library.
-+
-+ If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-+ using \`ar' and \`ranlib', or on Windows using \`lib'.
-+
-+ If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-+ is created, otherwise an executable program is created."
-+ ;;
-+
-+ uninstall)
-+ $echo \
-+ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-+
-+ Remove libraries from an installation directory.
-+
-+ RM is the name of the program to use to delete files associated with each FILE
-+ (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-+ to RM.
-+
-+ If FILE is a libtool library, all the files associated with it are deleted.
-+ Otherwise, only FILE itself is deleted using RM."
-+ ;;
-+
-+ *)
-+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
-+ $echo "$help" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ echo
-+ $echo "Try \`$modename --help' for more information about other modes."
-+
-+ exit 0
-+
-+ # Local Variables:
-+ # mode:shell-script
-+ # sh-indentation:2
-+ # End:
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/m4/vorbis.m4 xine-lib-1-beta12/m4/vorbis.m4
-*** xine-lib-1-beta12_orig/m4/vorbis.m4 Mon Nov 26 16:07:49 2001
---- xine-lib-1-beta12/m4/vorbis.m4 Sun May 18 14:52:51 2003
-***************
-*** 18,24 ****
- VORBIS_LIBDIR="-L$vorbis_prefix/lib"
- fi
-
-! VORBIS_LIBS="$VORBIS_LIBDIR -lvorbis -lm"
- VORBISFILE_LIBS="-lvorbisfile"
- VORBISENC_LIBS="-lvorbisenc"
-
---- 18,24 ----
- VORBIS_LIBDIR="-L$vorbis_prefix/lib"
- fi
-
-! VORBIS_LIBS="$VORBIS_LIBDIR -lvorbisidec -lm"
- VORBISFILE_LIBS="-lvorbisfile"
- VORBISENC_LIBS="-lvorbisenc"
-
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/demuxers/Makefile.am xine-lib-1-beta12/src/demuxers/Makefile.am
-*** xine-lib-1-beta12_orig/src/demuxers/Makefile.am Thu May 1 15:46:11 2003
---- xine-lib-1-beta12/src/demuxers/Makefile.am Sun May 18 14:43:33 2003
-***************
-*** 1,4 ****
-! AM_CFLAGS = $(THEORA_CFLAGS) $(OGG_CFLAGS) @ANSI_FLAGS@
-
- LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic
-
---- 1,4 ----
-! AM_CFLAGS = $(THEORA_CFLAGS) $(VORBIS_CFLAGS) $(OGG_CFLAGS) @ANSI_FLAGS@
-
- LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic
-
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/Makefile.am xine-lib-1-beta12/src/libffmpeg/libavcodec/Makefile.am
-*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/Makefile.am Sat May 10 09:04:37 2003
---- xine-lib-1-beta12/src/libffmpeg/libavcodec/Makefile.am Sun May 18 13:36:25 2003
-***************
-*** 10,18 ****
- ppc/dsputil_altivec.c ppc/fft_altivec.c ppc/Makefile.am ppc/mpegvideo_ppc.c \
- ppc/dsputil_altivec.h ppc/idct_altivec.c
-
-! AM_CFLAGS = $(LIBFFMPEG_CFLAGS) -DCONFIG_RISKY
- ASFLAGS =
-
- LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic
-
- noinst_LTLIBRARIES = libavcodec.la
---- 10,25 ----
- ppc/dsputil_altivec.c ppc/fft_altivec.c ppc/Makefile.am ppc/mpegvideo_ppc.c \
- ppc/dsputil_altivec.h ppc/idct_altivec.c
-
-! #AM_CFLAGS = $(LIBFFMPEG_CFLAGS) -DCONFIG_RISKY
- ASFLAGS =
-
-+ if HAVE_ARMV4L
-+ AM_CFLAGS = -DARCH_ARMV4L $(LIBFFMPEG_CFLAGS)
-+ else
-+ AM_CFLAGS = $(LIBFFMPEG_CFLAGS)
-+ endif
-+
-+
- LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic
-
- noinst_LTLIBRARIES = libavcodec.la
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/Makefile.am xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/Makefile.am
-*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/Makefile.am Wed Oct 9 01:13:39 2002
---- xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/Makefile.am Sun May 18 13:38:26 2003
-***************
-*** 9,22 ****
-
- noinst_LTLIBRARIES = libavcodec_armv4l.la
-
-! libavcodec_armv4l_src = dsputil_arm.c jrevdct_arm.S
- libavcodec_armv4l_dummy = libavcodec_armv4l_dummy.c
- EXTRA_DIST = $(libavcodec_armv4l_src) $(libavcodec_armv4l_dummy)
-
-! #if HAVE_ARMV4L
-! #armv4l_modules = $(libavcodec_armv4l_src)
-! #endif
-! armv4l_modules =
-
- libavcodec_armv4l_la_SOURCES = $(armv4l_modules) $(libavcodec_armv4l_dummy)
-
---- 9,22 ----
-
- noinst_LTLIBRARIES = libavcodec_armv4l.la
-
-! libavcodec_armv4l_src = mpegvideo_arm.c dsputil_arm.c jrevdct_arm.S
- libavcodec_armv4l_dummy = libavcodec_armv4l_dummy.c
- EXTRA_DIST = $(libavcodec_armv4l_src) $(libavcodec_armv4l_dummy)
-
-! if HAVE_ARMV4L
-! armv4l_modules = $(libavcodec_armv4l_src)
-! endif
-! #armv4l_modules =
-
- libavcodec_armv4l_la_SOURCES = $(armv4l_modules) $(libavcodec_armv4l_dummy)
-
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c
-*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c Fri Mar 28 16:38:06 2003
---- xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/dsputil_arm.c Wed Jul 2 19:51:29 2003
-***************
-*** 48,53 ****
---- 48,54 ----
- if(idct_algo==FF_IDCT_AUTO || idct_algo==FF_IDCT_ARM){
- c->idct_put= arm_idct_put;
- c->idct_add= arm_idct_add;
-+ /* c->idct = j_rev_dct_ARM; */
- c->idct_permutation_type= FF_LIBMPEG2_IDCT_PERM;/* FF_NO_IDCT_PERM */
- }
- }
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c
-*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c Wed Dec 31 19:00:00 1969
---- xine-lib-1-beta12/src/libffmpeg/libavcodec/armv4l/mpegvideo_arm.c Sun May 18 13:44:55 2003
-***************
-*** 0 ****
---- 1,26 ----
-+ /*
-+ * Copyright (c) 2002 Michael Niedermayer
-+ *
-+ * This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU Lesser General Public
-+ * License as published by the Free Software Foundation; either
-+ * version 2 of the License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * Lesser General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU Lesser General Public
-+ * License along with this library; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+ #include "../dsputil.h"
-+ #include "../mpegvideo.h"
-+ #include "../avcodec.h"
-+
-+ void MPV_common_init_armv4l(MpegEncContext *s)
-+ {
-+ }
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/dsputil.h xine-lib-1-beta12/src/libffmpeg/libavcodec/dsputil.h
-*** xine-lib-1-beta12_orig/src/libffmpeg/libavcodec/dsputil.h Sat May 10 09:04:38 2003
---- xine-lib-1-beta12/src/libffmpeg/libavcodec/dsputil.h Sun May 18 13:45:56 2003
-***************
-*** 48,53 ****
---- 48,54 ----
- void ff_jpeg_fdct_islow (DCTELEM *data);
-
- void j_rev_dct (DCTELEM *data);
-+ void j_rev_dct_ARM (DCTELEM *data);
-
- void ff_fdct_mmx(DCTELEM *block);
-
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libffmpeg/xine_decoder.c xine-lib-1-beta12/src/libffmpeg/xine_decoder.c
-*** xine-lib-1-beta12_orig/src/libffmpeg/xine_decoder.c Sat May 10 09:04:37 2003
---- xine-lib-1-beta12/src/libffmpeg/xine_decoder.c Mon May 19 18:59:11 2003
-***************
-*** 334,340 ****
- this->pp_available = 0;
- break;
- }
-!
- /* Detect what cpu accel we have */
- cpu_caps = xine_mm_accel();
- this->pp_flags = PP_FORMAT_420;
---- 334,344 ----
- this->pp_available = 0;
- break;
- }
-!
-! #if 0
-! this->pp_available = 0; /* remove post processing shit, probably a bug in the functions checking the quality value!!*/
-! #endif /* if 0 */
-!
- /* Detect what cpu accel we have */
- cpu_caps = xine_mm_accel();
- this->pp_flags = PP_FORMAT_420;
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/libvorbis/xine_decoder.c xine-lib-1-beta12/src/libvorbis/xine_decoder.c
-*** xine-lib-1-beta12_orig/src/libvorbis/xine_decoder.c Thu May 1 17:39:28 2003
---- xine-lib-1-beta12/src/libvorbis/xine_decoder.c Sun May 18 13:49:30 2003
-***************
-*** 205,211 ****
-
- } else if (this->output_open) {
-
-! float **pcm;
- int samples;
-
- if(vorbis_synthesis(&this->vb,op)==0)
---- 205,211 ----
-
- } else if (this->output_open) {
-
-! int **pcm;
- int samples;
-
- if(vorbis_synthesis(&this->vb,op)==0)
-***************
-*** 227,235 ****
- interleave */
- for(i=0;i<this->vi.channels;i++){
- ogg_int16_t *ptr=audio_buffer->mem+i;
-! float *mono=pcm[i];
- for(j=0;j<bout;j++){
-! int val=mono[j]*32767.f;
- /* might as well guard against clipping */
- if(val>32767){
- val=32767;
---- 227,235 ----
- interleave */
- for(i=0;i<this->vi.channels;i++){
- ogg_int16_t *ptr=audio_buffer->mem+i;
-! int *mono=pcm[i];
- for(j=0;j<bout;j++){
-! int val=mono[j]>>9;
- /* might as well guard against clipping */
- if(val>32767){
- val=32767;
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/audio_decoder.c xine-lib-1-beta12/src/xine-engine/audio_decoder.c
-*** xine-lib-1-beta12_orig/src/xine-engine/audio_decoder.c Sun Apr 6 19:15:05 2003
---- xine-lib-1-beta12/src/xine-engine/audio_decoder.c Sun May 18 14:16:05 2003
-***************
-*** 354,360 ****
-
- pthread_attr_t pth_attrs;
- struct sched_param pth_params;
-! int err;
-
- if (stream->audio_out == NULL) {
- stream->audio_fifo = NULL;
---- 354,360 ----
-
- pthread_attr_t pth_attrs;
- struct sched_param pth_params;
-! int err, num_audio_buffers, size_audio_buffers;
-
- if (stream->audio_out == NULL) {
- stream->audio_fifo = NULL;
-***************
-*** 368,374 ****
---- 368,399 ----
- * We provide buffers of 8k size instead of 2k for demuxers sending
- * larger chunks.
- */
-+ /* changed the allocation method for the buffer, using the same trick as for the video part,
-+ i.e. it will give better possibilities to customize the size.
- stream->audio_fifo = fifo_buffer_new (230, 8192);
-+ */
-+
-+ num_audio_buffers = stream->xine->config->register_num (stream->xine->config,
-+ "audio.num_buffers",
-+ 50,
-+ "number of audio buffers to allocate (higher values mean smoother playback but higher latency)",
-+ NULL, 20,
-+ NULL, NULL);
-+
-+
-+ size_audio_buffers = stream->xine->config->register_num (stream->xine->config,
-+ "audio.size_buffers",
-+ 8192,
-+ "size of the audio buffers to allocate",
-+ NULL, 20,
-+ NULL, NULL);
-+
-+
-+ /* LOGGING INFO ABOUT THE CURRENT SIZE OF THE BUFFERS: */
-+ fprintf (stderr, "************************* %s:function %s, number of buffers:%d (%d B) [default:50 (400 kB)]\n", __FILE__, __FUNCTION__, num_audio_buffers, num_audio_buffers*size_audio_buffers);
-+ stream->audio_fifo = fifo_buffer_new (num_audio_buffers, size_audio_buffers);
-+
-+
- stream->audio_channel_user = -1;
- stream->audio_channel_auto = -1;
- stream->audio_track_map_entries = 0;
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/audio_out.c xine-lib-1-beta12/src/xine-engine/audio_out.c
-*** xine-lib-1-beta12_orig/src/xine-engine/audio_out.c Fri Apr 25 18:06:27 2003
---- xine-lib-1-beta12/src/xine-engine/audio_out.c Sun May 18 14:29:29 2003
-***************
-*** 89,98 ****
---- 89,103 ----
- #define LOG_RESAMPLE_SYNC
- */
-
-+ /*
-+ REPLACED BY CONFIG ENTRIES
- #define NUM_AUDIO_BUFFERS 32
- #define AUDIO_BUF_SIZE 32768
-
- #define ZERO_BUF_SIZE 5000
-+ */
-+
-+ static int iNumAudioBuffers, iAudioBufSize, iZeroBufSize;
-
- /* By adding gap errors (difference between reported and expected
- * sound card clock) into metronom's vpts_offset we can use its
-***************
-*** 117,123 ****
---- 122,133 ----
- * buffers may be dropped or gaps filled with silence.
- */
- #define SYNC_TIME_INVERVAL (1 * 90000)
-+
-+ /*
-+ REPLACED BY CONFIG_ENTRIES
- #define SYNC_BUF_INTERVAL NUM_AUDIO_BUFFERS / 2
-+ */
-+
- #define SYNC_GAP_RATE 4
-
- /* Alternative for metronom feedback: fix sound card clock drift
-***************
-*** 430,440 ****
- }
-
- while (num_frames > 0 && !this->discard_buffers) {
-! if (num_frames > ZERO_BUF_SIZE) {
- pthread_mutex_lock( &this->driver_lock );
- if(this->driver_open) {
-! this->driver->write(this->driver, this->zero_space, ZERO_BUF_SIZE);
-! num_frames -= ZERO_BUF_SIZE;
- } else
- num_frames = 0;
- pthread_mutex_unlock( &this->driver_lock );
---- 440,450 ----
- }
-
- while (num_frames > 0 && !this->discard_buffers) {
-! if (num_frames > iZeroBufSize) {
- pthread_mutex_lock( &this->driver_lock );
- if(this->driver_open) {
-! this->driver->write(this->driver, this->zero_space, iZeroBufSize);
-! num_frames -= iZeroBufSize;
- } else
- num_frames = 0;
- pthread_mutex_unlock( &this->driver_lock );
-***************
-*** 1059,1065 ****
- */
- } else if ( abs(gap) < AO_MAX_GAP && abs(gap) > this->gap_tolerance &&
- cur_time > (last_sync_time + SYNC_TIME_INVERVAL) &&
-! bufs_since_sync >= SYNC_BUF_INTERVAL &&
- !this->resample_sync_method ) {
- xine_stream_t *stream;
- #ifdef LOG
---- 1069,1075 ----
- */
- } else if ( abs(gap) < AO_MAX_GAP && abs(gap) > this->gap_tolerance &&
- cur_time > (last_sync_time + SYNC_TIME_INVERVAL) &&
-! bufs_since_sync >= (iNumAudioBuffers/2) &&
- !this->resample_sync_method ) {
- xine_stream_t *stream;
- #ifdef LOG
-***************
-*** 1786,1791 ****
---- 1796,1826 ----
- static char *resample_modes[] = {"auto", "off", "on", NULL};
- static char *av_sync_methods[] = {"metronom_feedback", "resample", NULL};
-
-+
-+
-+ iNumAudioBuffers = config->register_num (config,
-+ "audio.out_num_audio_buf",
-+ 16,
-+ "number of audio buffer on the output side",
-+ NULL, 20,
-+ NULL, NULL);
-+
-+ iAudioBufSize = config->register_num (config,
-+ "audio.out_size_audio_buf",
-+ 8192,
-+ "size of the audio buffers to allocate on the output side",
-+ NULL, 20,
-+ NULL, NULL);
-+
-+ iZeroBufSize = config->register_num (config,
-+ "audio.out_size_zero_buf",
-+ 2048,
-+ "size of the zero buffers to allocate on the output side",
-+ NULL, 20,
-+ NULL, NULL);
-+
-+
-+
- this = xine_xmalloc (sizeof (aos_t)) ;
-
- this->driver = driver;
-***************
-*** 1813,1819 ****
- this->audio_paused = 0;
- this->flush_audio_driver = 0;
- this->discard_buffers = 0;
-! this->zero_space = xine_xmalloc (ZERO_BUF_SIZE * 2 * 6);
- if (!grab_only)
- this->gap_tolerance = driver->get_gap_tolerance (this->driver);
-
---- 1848,1854 ----
- this->audio_paused = 0;
- this->flush_audio_driver = 0;
- this->discard_buffers = 0;
-! this->zero_space = xine_xmalloc (iZeroBufSize * 2 * 6);
- if (!grab_only)
- this->gap_tolerance = driver->get_gap_tolerance (this->driver);
-
-***************
-*** 1871,1883 ****
- this->free_fifo = fifo_new ();
- this->out_fifo = fifo_new ();
-
-! for (i=0; i<NUM_AUDIO_BUFFERS; i++) {
-
- audio_buffer_t *buf;
-
- buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t));
-! buf->mem = xine_xmalloc (AUDIO_BUF_SIZE);
-! buf->mem_size = AUDIO_BUF_SIZE;
- buf->extra_info = malloc(sizeof(extra_info_t));
-
- fifo_append (this->free_fifo, buf);
---- 1906,1919 ----
- this->free_fifo = fifo_new ();
- this->out_fifo = fifo_new ();
-
-!
-! for (i=0; i<iNumAudioBuffers; i++) {
-
- audio_buffer_t *buf;
-
- buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t));
-! buf->mem = xine_xmalloc (iAudioBufSize);
-! buf->mem_size = iAudioBufSize;
- buf->extra_info = malloc(sizeof(extra_info_t));
-
- fifo_append (this->free_fifo, buf);
-***************
-*** 1889,1896 ****
- audio_buffer_t *buf;
-
- buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t));
-! buf->mem = xine_xmalloc (4*AUDIO_BUF_SIZE);
-! buf->mem_size = 4*AUDIO_BUF_SIZE;
- buf->extra_info = malloc(sizeof(extra_info_t));
-
- this->frame_buf[i] = buf;
---- 1925,1932 ----
- audio_buffer_t *buf;
-
- buf = (audio_buffer_t *) xine_xmalloc (sizeof (audio_buffer_t));
-! buf->mem = xine_xmalloc (4*iAudioBufSize);
-! buf->mem_size = 4*iAudioBufSize;
- buf->extra_info = malloc(sizeof(extra_info_t));
-
- this->frame_buf[i] = buf;
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/video_overlay.h xine-lib-1-beta12/src/xine-engine/video_overlay.h
-*** xine-lib-1-beta12_orig/src/xine-engine/video_overlay.h Wed Nov 20 08:51:36 2002
---- xine-lib-1-beta12/src/xine-engine/video_overlay.h Sun May 18 14:39:47 2003
-***************
-*** 32,40 ****
- #define CLUT_Y_CR_CB_INIT(_y,_cr,_cb) { (_cb), (_cr), (_y) }
- #endif
-
-! #define MAX_OBJECTS 50
-! #define MAX_EVENTS 50
-! #define MAX_SHOWING 5
-
- #define OVERLAY_EVENT_NULL 0
- #define OVERLAY_EVENT_SHOW 1
---- 32,40 ----
- #define CLUT_Y_CR_CB_INIT(_y,_cr,_cb) { (_cb), (_cr), (_y) }
- #endif
-
-! #define MAX_OBJECTS 3
-! #define MAX_EVENTS 3
-! #define MAX_SHOWING 3
-
- #define OVERLAY_EVENT_NULL 0
- #define OVERLAY_EVENT_SHOW 1
-diff -rcN -x Makefile.in -x POTFILES -x libxine.pc -x relchk.sh -x xine-config -x dsputil_arm.c_dilb -x jrevdct_arm.S_dilb -x libdha -x vidix -x demux_ogg.c_before_test_song_length -x config.log -x config.status -x autom4te.cache -x aclocal.m4 -x xine.c_orig -x libtool-nofpic -x config.sub -x config.guess -x configure -x SlackBuild -x stamp-h1 -x config.h -x libtool -x ltmain.sh xine-lib-1-beta12_orig/src/xine-engine/xine.c xine-lib-1-beta12/src/xine-engine/xine.c
-*** xine-lib-1-beta12_orig/src/xine-engine/xine.c Sat Apr 26 10:43:33 2003
---- xine-lib-1-beta12/src/xine-engine/xine.c Sat Aug 9 16:44:20 2003
-***************
-*** 1209,1214 ****
---- 1209,1218 ----
- static char *demux_strategies[] = {"default", "reverse", "content",
- "extension", NULL};
-
-+ /* specific information: who did compile that: */
-+ printf("\n/!\\ This is xine-lib 1.0beta12 compiled by buildroot and patched by Dilb (don't forget to give this information when reporting a bug) /!\\\n");
-+
-+
- /* initialize color conversion tables and functions */
- init_yuv_conversion();
-
+++ /dev/null
-Copyright (C) 2002, Fred Boulay <dilb@handhelds.org>
-Licensed under GPL v2
-
---- src/libffmpeg/libavcodec/Makefile.am.orig 2002-11-04 01:31:49.000000000 +0100
-+++ src/libffmpeg/libavcodec/Makefile.am 2002-12-19 17:00:59.000000000 +0100
-@@ -6,9 +6,16 @@ SUBDIRS = armv4l i386 mlib alpha
-
- EXTRA_DIST = fdctref.c imgresample.c
-
--AM_CFLAGS = $(LIBFFMPEG_CFLAGS)
-+#AM_CFLAGS = $(LIBFFMPEG_CFLAGS)
- ASFLAGS =
-
-+if HAVE_ARMV4L
-+AM_CFLAGS = -DARCH_ARMV4L $(LIBFFMPEG_CFLAGS)
-+else
-+AM_CFLAGS = $(LIBFFMPEG_CFLAGS)
-+endif
-+
-+
- LIBTOOL = $(SHELL) $(top_builddir)/libtool-nofpic
-
- noinst_LTLIBRARIES = libavcodec.la
---- src/libffmpeg/libavcodec/dsputil.h.orig 2002-12-19 17:02:39.000000000 +0100
-+++ src/libffmpeg/libavcodec/dsputil.h 2002-12-19 17:03:15.000000000 +0100
-@@ -35,6 +35,7 @@ void fdct_ifast (DCTELEM *data);
- void ff_jpeg_fdct_islow (DCTELEM *data);
-
- void j_rev_dct (DCTELEM *data);
-+void j_rev_dct_ARM ( DCTELEM *data );
-
- void ff_fdct_mmx(DCTELEM *block);
-
---- src/libffmpeg/libavcodec/mpegvideo.c.orig 2002-12-19 17:03:28.000000000 +0100
-+++ src/libffmpeg/libavcodec/mpegvideo.c 2002-12-19 17:05:50.000000000 +0100
-@@ -186,6 +186,23 @@ static void ff_jref_idct_add(UINT8 *dest
- ff_add_pixels_clamped(block, dest, line_size);
- }
-
-+#ifdef ARCH_ARMV4L
-+
-+static void ff_jref_idct_put_armv4l(UINT8 *dest, int line_size, DCTELEM *block)
-+{
-+// fprintf(stderr, "src/libffmpeg/libavcodec/mpegvideo.c : ff_jref_idct_put_armv4l utilisant l'iDCT ARMv4l en ASM\n");
-+ j_rev_dct_ARM (block);
-+ ff_put_pixels_clamped(block, dest, line_size);
-+}
-+static void ff_jref_idct_add_armv4l(UINT8 *dest, int line_size, DCTELEM *block)
-+{
-+// fprintf(stderr, "src/libffmpeg/libavcodec/mpegvideo.c : ff_jref_idct_add_armv4l utilisant l'iDCT ARMv4l en ASM\n");
-+ j_rev_dct_ARM (block);
-+ ff_add_pixels_clamped(block, dest, line_size);
-+}
-+
-+#endif
-+
- /* init common dct for both encoder and decoder */
- int DCT_common_init(MpegEncContext *s)
- {
-@@ -227,7 +244,11 @@ int DCT_common_init(MpegEncContext *s)
- MPV_common_init_mmi(s);
- #endif
- #ifdef ARCH_ARMV4L
-- MPV_common_init_armv4l(s);
-+ /* MPV_common_init_armv4l(s); */
-+ /* Methode bourrine, mais bon, c'est pour pas trop se prendre la tete a tout changer ce soir, a ameliorer plus tard*/
-+ s->idct_put= ff_jref_idct_put_armv4l;
-+ s->idct_add= ff_jref_idct_add_armv4l;
-+ s->idct_permutation_type= FF_NO_IDCT_PERM;
- #endif
- #ifdef ARCH_POWERPC
- MPV_common_init_ppc(s);
---- src/libffmpeg/libavcodec/armv4l/jrevdct_arm.S 2001-12-27 21:02:23.000000000 +0100
-+++ src/libffmpeg/libavcodec/armv4l/jrevdct_arm.S 2002-12-17 23:38:13.000000000 +0100
-@@ -1,386 +1,491 @@
- /*
-- C-like prototype :
-- void j_rev_dct_ARM(DCTBLOCK data)
-+ * jrevdct_arm.S
-+ * Copyright (C) 2002 Frederic 'dilb' Boulay.
-+ * All Rights Reserved.
-+ *
-+ * Author: Frederic Boulay <dilb@handhelds.org>
-+ *
-+ * you can redistribute this file and/or modify
-+ * it under the terms of the GNU General Public License (version 2)
-+ * as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ *
-+ * The function defined in this file, is derived from the simple_idct function from
-+ * the libavcodec library part of the ffmpeg project.
-+ */
-
-- With DCTBLOCK being a pointer to an array of 64 'signed shorts'
-
-- Copyright (c) 2001 Lionel Ulmer (lionel.ulmer@free.fr / bbrox@bbrox.org)
-
-- Permission is hereby granted, free of charge, to any person obtaining a copy
-- of this software and associated documentation files (the "Software"), to deal
-- in the Software without restriction, including without limitation the rights
-- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-- copies of the Software, and to permit persons to whom the Software is
-- furnished to do so, subject to the following conditions:
--
-- The above copyright notice and this permission notice shall be included in
-- all copies or substantial portions of the Software.
--
-- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-- COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
-- IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-- CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
--
--*/
--#define FIX_0_298631336 2446
--#define FIX_0_541196100 4433
--#define FIX_0_765366865 6270
--#define FIX_1_175875602 9633
--#define FIX_1_501321110 12299
--#define FIX_2_053119869 16819
--#define FIX_3_072711026 25172
--#define FIX_M_0_390180644 -3196
--#define FIX_M_0_899976223 -7373
--#define FIX_M_1_847759065 -15137
--#define FIX_M_1_961570560 -16069
--#define FIX_M_2_562915447 -20995
--#define FIX_0xFFFF 0xFFFF
--
--#define FIX_0_298631336_ID 0
--#define FIX_0_541196100_ID 4
--#define FIX_0_765366865_ID 8
--#define FIX_1_175875602_ID 12
--#define FIX_1_501321110_ID 16
--#define FIX_2_053119869_ID 20
--#define FIX_3_072711026_ID 24
--#define FIX_M_0_390180644_ID 28
--#define FIX_M_0_899976223_ID 32
--#define FIX_M_1_847759065_ID 36
--#define FIX_M_1_961570560_ID 40
--#define FIX_M_2_562915447_ID 44
--#define FIX_0xFFFF_ID 48
-+
-+/* useful constants for the algorithm, they are save in __constant_ptr__ at the end of the source code.*/
-+#define W1 22725
-+#define W2 21407
-+#define W3 19266
-+#define W4 16383
-+#define W5 12873
-+#define W6 8867
-+#define W7 4520
-+#define MASK_MSHW 0xFFFF0000
-+
-+/* offsets of the constants in the vector*/
-+#define offW1 0
-+#define offW2 4
-+#define offW3 8
-+#define offW4 12
-+#define offW5 16
-+#define offW6 20
-+#define offW7 24
-+#define offMASK_MSHW 28
-+
-+#define ROW_SHIFT 11
-+#define ROW_SHIFT2MSHW (16-11)
-+#define COL_SHIFT 20
-+#define ROW_SHIFTED_1 1024 /* 1<< (ROW_SHIFT-1)*/
-+#define COL_SHIFTED_1 524288 /* 1<< (COL_SHIFT-1)*/
-+
-+
- .text
- .align
--
- .global j_rev_dct_ARM
--j_rev_dct_ARM:
-- stmdb sp!, { r4 - r12, lr } @ all callee saved regs
-
-- sub sp, sp, #4 @ reserve some space on the stack
-- str r0, [ sp ] @ save the DCT pointer to the stack
-+j_rev_dct_ARM:
-+simple_idct3:
-+simple_idct_ARM:
-+ @@ void simple_idct_ARM(int16_t *block)
-+ @@ save stack for reg needed (take all of them),
-+ @@ R0-R3 are scratch regs, so no need to save them, but R0 contains the pointer to block
-+ @@ so it must not be overwritten, if it is not saved!!
-+ @@ R12 is another scratch register, so it should not be saved too
-+ @@ save all registers
-+ stmfd sp!, {r4-r11, r14} @ R14 is also called LR
-+ @@ at this point, R0=block, other registers are free.
-+ add r14, r0, #112 @ R14=&block[8*7], better start from the last row, and decrease the value until row=0, i.e. R12=block.
-+ add r12, pc, #(__constant_ptr__-.-8) @ R12=__constant_ptr__, the vector containing the constants, probably not necessary to reserve a register for it
-+ @@ add 2 temporary variables in the stack: R0 and R14
-+ sub sp, sp, #8 @ allow 2 local variables
-+ str r0, [sp, #0] @ save block in sp[0]
-+ @@ stack status
-+ @@ sp+4 free
-+ @@ sp+0 R0 (block)
-+
-+
-+ @@ at this point, R0=block, R14=&block[56], R12=__const_ptr_, R1-R11 free
-+
-+
-+__row_loop:
-+ @@ read the row and check if it is null, almost null, or not, according to strongarm specs, it is not necessary to optimise ldr accesses (i.e. split 32bits in 2 16bits words), at least it gives more usable registers :)
-+ ldr r1, [r14, #0] @ R1=(int32)(R12)[0]=ROWr32[0] (relative row cast to a 32b pointer)
-+ ldr r2, [r14, #4] @ R2=(int32)(R12)[1]=ROWr32[1]
-+ ldr r3, [r14, #8] @ R3=ROWr32[2]
-+ ldr r4, [r14, #12] @ R4=ROWr32[3]
-+ @@ check if the words are null, if all of them are null, then proceed with next row (branch __end_row_loop),
-+ @@ if ROWr16[0] is the only one not null, then proceed with this special case (branch __almost_empty_row)
-+ @@ else follow the complete algorithm.
-+ @@ at this point, R0=block, R14=&block[n], R12=__const_ptr_, R1=ROWr32[0], R2=ROWr32[1],
-+ @@ R3=ROWr32[2], R4=ROWr32[3], R5-R11 free
-+ orr r5, r4, r3 @ R5=R4 | R3
-+ orr r5, r5, r2 @ R5=R4 | R3 | R2
-+ orrs r6, r5, r1 @ Test R5 | R1 (the aim is to check if everything is null)
-+ beq __end_row_loop
-+ mov r7, r1, asr #16 @ R7=R1>>16=ROWr16[1] (evaluate it now, as it could be useful later)
-+ ldrsh r6, [r14, #0] @ R6=ROWr16[0]
-+ orrs r5, r5, r7 @ R5=R4 | R3 | R2 | R7
-+ beq __almost_empty_row
-+
-+__b_evaluation:
-+ @@ at this point, R0=block (temp), R1(free), R2=ROWr32[1], R3=ROWr32[2], R4=ROWr32[3],
-+ @@ R5=(temp), R6=ROWr16[0], R7=ROWr16[1], R8-R11 free,
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ to save some registers/calls, proceed with b0-b3 first, followed by a0-a3
-+
-+ @@ MUL16(b0, W1, row[1]);
-+ @@ MUL16(b1, W3, row[1]);
-+ @@ MUL16(b2, W5, row[1]);
-+ @@ MUL16(b3, W7, row[1]);
-+ @@ MAC16(b0, W3, row[3]);
-+ @@ MAC16(b1, -W7, row[3]);
-+ @@ MAC16(b2, -W1, row[3]);
-+ @@ MAC16(b3, -W5, row[3]);
-+ ldr r8, [r12, #offW1] @ R8=W1
-+ mov r2, r2, asr #16 @ R2=ROWr16[3]
-+ mul r0, r8, r7 @ R0=W1*ROWr16[1]=b0 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ ldr r9, [r12, #offW3] @ R9=W3
-+ ldr r10, [r12, #offW5] @ R10=W5
-+ mul r1, r9, r7 @ R1=W3*ROWr16[1]=b1 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ ldr r11, [r12, #offW7] @ R11=W7
-+ mul r5, r10, r7 @ R5=W5*ROWr16[1]=b2 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ mul r7, r11, r7 @ R7=W7*ROWr16[1]=b3 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ teq r2, #0 @ if null avoid muls
-+ mlane r0, r9, r2, r0 @ R0+=W3*ROWr16[3]=b0 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+ rsbne r2, r2, #0 @ R2=-ROWr16[3]
-+ mlane r1, r11, r2, r1 @ R1-=W7*ROWr16[3]=b1 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+ mlane r5, r8, r2, r5 @ R5-=W1*ROWr16[3]=b2 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+ mlane r7, r10, r2, r7 @ R7-=W5*ROWr16[3]=b3 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+
-+ @@ at this point, R0=b0, R1=b1, R2 (free), R3=ROWr32[2], R4=ROWr32[3],
-+ @@ R5=b2, R6=ROWr16[0], R7=b3, R8=W1, R9=W3, R10=W5, R11=W7,
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ temp = ((uint32_t*)row)[2] | ((uint32_t*)row)[3];
-+ @@ if (temp != 0) {}
-+ orrs r2, r3, r4 @ R2=ROWr32[2] | ROWr32[3]
-+ beq __end_b_evaluation
-+
-+ @@ at this point, R0=b0, R1=b1, R2 (free), R3=ROWr32[2], R4=ROWr32[3],
-+ @@ R5=b2, R6=ROWr16[0], R7=b3, R8=W1, R9=W3, R10=W5, R11=W7,
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ MAC16(b0, W5, row[5]);
-+ @@ MAC16(b2, W7, row[5]);
-+ @@ MAC16(b3, W3, row[5]);
-+ @@ MAC16(b1, -W1, row[5]);
-+ @@ MAC16(b0, W7, row[7]);
-+ @@ MAC16(b2, W3, row[7]);
-+ @@ MAC16(b3, -W1, row[7]);
-+ @@ MAC16(b1, -W5, row[7]);
-+ mov r3, r3, asr #16 @ R3=ROWr16[5]
-+ teq r3, #0 @ if null avoid muls
-+ mlane r0, r10, r3, r0 @ R0+=W5*ROWr16[5]=b0
-+ mov r4, r4, asr #16 @ R4=ROWr16[7]
-+ mlane r5, r11, r3, r5 @ R5+=W7*ROWr16[5]=b2
-+ mlane r7, r9, r3, r7 @ R7+=W3*ROWr16[5]=b3
-+ rsbne r3, r3, #0 @ R3=-ROWr16[5]
-+ mlane r1, r8, r3, r1 @ R7-=W1*ROWr16[5]=b1
-+ @@ R3 is free now
-+ teq r4, #0 @ if null avoid muls
-+ mlane r0, r11, r4, r0 @ R0+=W7*ROWr16[7]=b0
-+ mlane r5, r9, r4, r5 @ R5+=W3*ROWr16[7]=b2
-+ rsbne r4, r4, #0 @ R4=-ROWr16[7]
-+ mlane r7, r8, r4, r7 @ R7-=W1*ROWr16[7]=b3
-+ mlane r1, r10, r4, r1 @ R1-=W5*ROWr16[7]=b1
-+ @@ R4 is free now
-+__end_b_evaluation:
-+ @@ at this point, R0=b0, R1=b1, R2=ROWr32[2] | ROWr32[3] (tmp), R3 (free), R4 (free),
-+ @@ R5=b2, R6=ROWr16[0], R7=b3, R8 (free), R9 (free), R10 (free), R11 (free),
-+ @@ R12=__const_ptr_, R14=&block[n]
-+
-+__a_evaluation:
-+ @@ a0 = (W4 * row[0]) + (1 << (ROW_SHIFT - 1));
-+ @@ a1 = a0 + W6 * row[2];
-+ @@ a2 = a0 - W6 * row[2];
-+ @@ a3 = a0 - W2 * row[2];
-+ @@ a0 = a0 + W2 * row[2];
-+ ldr r9, [r12, #offW4] @ R9=W4
-+ mul r6, r9, r6 @ R6=W4*ROWr16[0]
-+ ldr r10, [r12, #offW6] @ R10=W6
-+ ldrsh r4, [r14, #4] @ R4=ROWr16[2] (a3 not defined yet)
-+ add r6, r6, #ROW_SHIFTED_1 @ R6=W4*ROWr16[0] + 1<<(ROW_SHIFT-1) (a0)
-+
-+ mul r11, r10, r4 @ R11=W6*ROWr16[2]
-+ ldr r8, [r12, #offW2] @ R8=W2
-+ sub r3, r6, r11 @ R3=a0-W6*ROWr16[2] (a2)
-+ @@ temp = ((uint32_t*)row)[2] | ((uint32_t*)row)[3];
-+ @@ if (temp != 0) {}
-+ teq r2, #0
-+ beq __end_bef_a_evaluation
-+
-+ add r2, r6, r11 @ R2=a0+W6*ROWr16[2] (a1)
-+ mul r11, r8, r4 @ R11=W2*ROWr16[2]
-+ sub r4, r6, r11 @ R4=a0-W2*ROWr16[2] (a3)
-+ add r6, r6, r11 @ R6=a0+W2*ROWr16[2] (a0)
-+
-+
-+ @@ at this point, R0=b0, R1=b1, R2=a1, R3=a2, R4=a3,
-+ @@ R5=b2, R6=a0, R7=b3, R8=W2, R9=W4, R10=W6, R11 (free),
-+ @@ R12=__const_ptr_, R14=&block[n]
-+
-+
-+ @@ a0 += W4*row[4]
-+ @@ a1 -= W4*row[4]
-+ @@ a2 -= W4*row[4]
-+ @@ a3 += W4*row[4]
-+ ldrsh r11, [r14, #8] @ R11=ROWr16[4]
-+ teq r11, #0 @ if null avoid muls
-+ mulne r11, r9, r11 @ R11=W4*ROWr16[4]
-+ @@ R9 is free now
-+ ldrsh r9, [r14, #12] @ R9=ROWr16[6]
-+ addne r6, r6, r11 @ R6+=W4*ROWr16[4] (a0)
-+ subne r2, r2, r11 @ R2-=W4*ROWr16[4] (a1)
-+ subne r3, r3, r11 @ R3-=W4*ROWr16[4] (a2)
-+ addne r4, r4, r11 @ R4+=W4*ROWr16[4] (a3)
-+ @@ W6 alone is no more useful, save W2*ROWr16[6] in it instead
-+ teq r9, #0 @ if null avoid muls
-+ mulne r11, r10, r9 @ R11=W6*ROWr16[6]
-+ addne r6, r6, r11 @ R6+=W6*ROWr16[6] (a0)
-+ mulne r10, r8, r9 @ R10=W2*ROWr16[6]
-+ @@ a0 += W6*row[6];
-+ @@ a3 -= W6*row[6];
-+ @@ a1 -= W2*row[6];
-+ @@ a2 += W2*row[6];
-+ subne r4, r4, r11 @ R4-=W6*ROWr16[6] (a3)
-+ subne r2, r2, r10 @ R2-=W2*ROWr16[6] (a1)
-+ addne r3, r3, r10 @ R3+=W2*ROWr16[6] (a2)
-+
-+__end_a_evaluation:
-+ @@ at this point, R0=b0, R1=b1, R2=a1, R3=a2, R4=a3,
-+ @@ R5=b2, R6=a0, R7=b3, R8 (free), R9 (free), R10 (free), R11 (free),
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ row[0] = (a0 + b0) >> ROW_SHIFT;
-+ @@ row[1] = (a1 + b1) >> ROW_SHIFT;
-+ @@ row[2] = (a2 + b2) >> ROW_SHIFT;
-+ @@ row[3] = (a3 + b3) >> ROW_SHIFT;
-+ @@ row[4] = (a3 - b3) >> ROW_SHIFT;
-+ @@ row[5] = (a2 - b2) >> ROW_SHIFT;
-+ @@ row[6] = (a1 - b1) >> ROW_SHIFT;
-+ @@ row[7] = (a0 - b0) >> ROW_SHIFT;
-+ add r8, r6, r0 @ R8=a0+b0
-+ add r9, r2, r1 @ R9=a1+b1
-+ @@ put 2 16 bits half-words in a 32bits word
-+ @@ ROWr32[0]=ROWr16[0] | (ROWr16[1]<<16) (only Little Endian compliant then!!!)
-+ ldr r10, [r12, #offMASK_MSHW] @ R10=0xFFFF0000
-+ and r9, r10, r9, lsl #ROW_SHIFT2MSHW @ R9=0xFFFF0000 & ((a1+b1)<<5)
-+ mvn r11, r10 @ R11= NOT R10= 0x0000FFFF
-+ and r8, r11, r8, asr #ROW_SHIFT @ R8=0x0000FFFF & ((a0+b0)>>11)
-+ orr r8, r8, r9
-+ str r8, [r14, #0]
-+
-+ add r8, r3, r5 @ R8=a2+b2
-+ add r9, r4, r7 @ R9=a3+b3
-+ and r9, r10, r9, lsl #ROW_SHIFT2MSHW @ R9=0xFFFF0000 & ((a3+b3)<<5)
-+ and r8, r11, r8, asr #ROW_SHIFT @ R8=0x0000FFFF & ((a2+b2)>>11)
-+ orr r8, r8, r9
-+ str r8, [r14, #4]
-+
-+ sub r8, r4, r7 @ R8=a3-b3
-+ sub r9, r3, r5 @ R9=a2-b2
-+ and r9, r10, r9, lsl #ROW_SHIFT2MSHW @ R9=0xFFFF0000 & ((a2-b2)<<5)
-+ and r8, r11, r8, asr #ROW_SHIFT @ R8=0x0000FFFF & ((a3-b3)>>11)
-+ orr r8, r8, r9
-+ str r8, [r14, #8]
-+
-+ sub r8, r2, r1 @ R8=a1-b1
-+ sub r9, r6, r0 @ R9=a0-b0
-+ and r9, r10, r9, lsl #ROW_SHIFT2MSHW @ R9=0xFFFF0000 & ((a0-b0)<<5)
-+ and r8, r11, r8, asr #ROW_SHIFT @ R8=0x0000FFFF & ((a1-b1)>>11)
-+ orr r8, r8, r9
-+ str r8, [r14, #12]
-+
-+ bal __end_row_loop
-+
-+__almost_empty_row:
-+ @@ the row was empty, except ROWr16[0], now, management of this special case
-+ @@ at this point, R0=block, R14=&block[n], R12=__const_ptr_, R1=ROWr32[0], R2=ROWr32[1],
-+ @@ R3=ROWr32[2], R4=ROWr32[3], R5=(temp), R6=ROWr16[0], R7=ROWr16[1],
-+ @@ R8=0xFFFF (temp), R9-R11 free
-+ mov r8, #0x10000 @ R8=0xFFFF (2 steps needed!) it saves a ldr call (because of delay run).
-+ sub r8, r8, #1 @ R8 is now ready.
-+ and r5, r8, r6, lsl #3 @ R5=R8 & (R6<<3)= (ROWr16[0]<<3) & 0xFFFF
-+ orr r5, r5, r5, lsl #16 @ R5=R5 | (R5<<16)
-+ str r5, [r14, #0] @ R14[0]=ROWr32[0]=R5
-+ str r5, [r14, #4] @ R14[4]=ROWr32[1]=R5
-+ str r5, [r14, #8] @ R14[8]=ROWr32[2]=R5
-+ str r5, [r14, #12] @ R14[12]=ROWr32[3]=R5
-+
-+__end_row_loop:
-+ @@ at this point, R0-R11 (free)
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ ldr r0, [sp, #0] @ R0=block
-+ teq r0, r14 @ compare current &block[8*n] to block, when block is reached, the loop is finished.
-+ sub r14, r14, #16
-+ bne __row_loop
-+
-+
-+
-+ @@ at this point, R0=block, R1-R11 (free)
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ add r14, r0, #14 @ R14=&block[7], better start from the last col, and decrease the value until col=0, i.e. R14=block.
-+__col_loop:
-+
-+__b_evaluation2:
-+ @@ at this point, R0=block (temp), R1-R11 (free)
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ proceed with b0-b3 first, followed by a0-a3
-+ @@ MUL16(b0, W1, col[8x1]);
-+ @@ MUL16(b1, W3, col[8x1]);
-+ @@ MUL16(b2, W5, col[8x1]);
-+ @@ MUL16(b3, W7, col[8x1]);
-+ @@ MAC16(b0, W3, col[8x3]);
-+ @@ MAC16(b1, -W7, col[8x3]);
-+ @@ MAC16(b2, -W1, col[8x3]);
-+ @@ MAC16(b3, -W5, col[8x3]);
-+ ldr r8, [r12, #offW1] @ R8=W1
-+ ldrsh r7, [r14, #16]
-+ mul r0, r8, r7 @ R0=W1*ROWr16[1]=b0 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ ldr r9, [r12, #offW3] @ R9=W3
-+ ldr r10, [r12, #offW5] @ R10=W5
-+ mul r1, r9, r7 @ R1=W3*ROWr16[1]=b1 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ ldr r11, [r12, #offW7] @ R11=W7
-+ mul r5, r10, r7 @ R5=W5*ROWr16[1]=b2 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ ldrsh r2, [r14, #48]
-+ mul r7, r11, r7 @ R7=W7*ROWr16[1]=b3 (ROWr16[1] must be the second arg, to have the possibility to save 1 cycle)
-+ teq r2, #0 @ if 0, then avoid muls
-+ mlane r0, r9, r2, r0 @ R0+=W3*ROWr16[3]=b0 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+ rsbne r2, r2, #0 @ R2=-ROWr16[3]
-+ mlane r1, r11, r2, r1 @ R1-=W7*ROWr16[3]=b1 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+ mlane r5, r8, r2, r5 @ R5-=W1*ROWr16[3]=b2 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+ mlane r7, r10, r2, r7 @ R7-=W5*ROWr16[3]=b3 (ROWr16[3] must be the second arg, to have the possibility to save 1 cycle)
-+
-+ @@ at this point, R0=b0, R1=b1, R2 (free), R3 (free), R4 (free),
-+ @@ R5=b2, R6 (free), R7=b3, R8=W1, R9=W3, R10=W5, R11=W7,
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ MAC16(b0, W5, col[5x8]);
-+ @@ MAC16(b2, W7, col[5x8]);
-+ @@ MAC16(b3, W3, col[5x8]);
-+ @@ MAC16(b1, -W1, col[5x8]);
-+ @@ MAC16(b0, W7, col[7x8]);
-+ @@ MAC16(b2, W3, col[7x8]);
-+ @@ MAC16(b3, -W1, col[7x8]);
-+ @@ MAC16(b1, -W5, col[7x8]);
-+ ldrsh r3, [r14, #80] @ R3=COLr16[5x8]
-+ teq r3, #0 @ if 0 then avoid muls
-+ mlane r0, r10, r3, r0 @ R0+=W5*ROWr16[5x8]=b0
-+ mlane r5, r11, r3, r5 @ R5+=W7*ROWr16[5x8]=b2
-+ mlane r7, r9, r3, r7 @ R7+=W3*ROWr16[5x8]=b3
-+ rsbne r3, r3, #0 @ R3=-ROWr16[5x8]
-+ ldrsh r4, [r14, #112] @ R4=COLr16[7x8]
-+ mlane r1, r8, r3, r1 @ R7-=W1*ROWr16[5x8]=b1
-+ @@ R3 is free now
-+ teq r4, #0 @ if 0 then avoid muls
-+ mlane r0, r11, r4, r0 @ R0+=W7*ROWr16[7x8]=b0
-+ mlane r5, r9, r4, r5 @ R5+=W3*ROWr16[7x8]=b2
-+ rsbne r4, r4, #0 @ R4=-ROWr16[7x8]
-+ mlane r7, r8, r4, r7 @ R7-=W1*ROWr16[7x8]=b3
-+ mlane r1, r10, r4, r1 @ R1-=W5*ROWr16[7x8]=b1
-+ @@ R4 is free now
-+__end_b_evaluation2:
-+ @@ at this point, R0=b0, R1=b1, R2 (free), R3 (free), R4 (free),
-+ @@ R5=b2, R6 (free), R7=b3, R8 (free), R9 (free), R10 (free), R11 (free),
-+ @@ R12=__const_ptr_, R14=&block[n]
-+
-+__a_evaluation2:
-+ @@ a0 = (W4 * col[8x0]) + (1 << (COL_SHIFT - 1));
-+ @@ a1 = a0 + W6 * row[2];
-+ @@ a2 = a0 - W6 * row[2];
-+ @@ a3 = a0 - W2 * row[2];
-+ @@ a0 = a0 + W2 * row[2];
-+ ldrsh r6, [r14, #0]
-+ ldr r9, [r12, #offW4] @ R9=W4
-+ mul r6, r9, r6 @ R6=W4*ROWr16[0]
-+ ldr r10, [r12, #offW6] @ R10=W6
-+ ldrsh r4, [r14, #32] @ R4=ROWr16[2] (a3 not defined yet)
-+ add r6, r6, #COL_SHIFTED_1 @ R6=W4*ROWr16[0] + 1<<(COL_SHIFT-1) (a0)
-+ mul r11, r10, r4 @ R11=W6*ROWr16[2]
-+ ldr r8, [r12, #offW2] @ R8=W2
-+ add r2, r6, r11 @ R2=a0+W6*ROWr16[2] (a1)
-+ sub r3, r6, r11 @ R3=a0-W6*ROWr16[2] (a2)
-+ mul r11, r8, r4 @ R11=W2*ROWr16[2]
-+ sub r4, r6, r11 @ R4=a0-W2*ROWr16[2] (a3)
-+ add r6, r6, r11 @ R6=a0+W2*ROWr16[2] (a0)
-+
-+ @@ at this point, R0=b0, R1=b1, R2=a1, R3=a2, R4=a3,
-+ @@ R5=b2, R6=a0, R7=b3, R8=W2, R9=W4, R10=W6, R11 (free),
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ a0 += W4*row[4]
-+ @@ a1 -= W4*row[4]
-+ @@ a2 -= W4*row[4]
-+ @@ a3 += W4*row[4]
-+ ldrsh r11, [r14, #64] @ R11=ROWr16[4]
-+ teq r11, #0 @ if null avoid muls
-+ mulne r11, r9, r11 @ R11=W4*ROWr16[4]
-+ @@ R9 is free now
-+ addne r6, r6, r11 @ R6+=W4*ROWr16[4] (a0)
-+ subne r2, r2, r11 @ R2-=W4*ROWr16[4] (a1)
-+ subne r3, r3, r11 @ R3-=W4*ROWr16[4] (a2)
-+ ldrsh r9, [r14, #96] @ R9=ROWr16[6]
-+ addne r4, r4, r11 @ R4+=W4*ROWr16[4] (a3)
-+ @@ W6 alone is no more useful, save W2*ROWr16[6] in it instead
-+ teq r9, #0 @ if null avoid muls
-+ mulne r11, r10, r9 @ R11=W6*ROWr16[6]
-+ addne r6, r6, r11 @ R6+=W6*ROWr16[6] (a0)
-+ mulne r10, r8, r9 @ R10=W2*ROWr16[6]
-+ @@ a0 += W6*row[6];
-+ @@ a3 -= W6*row[6];
-+ @@ a1 -= W2*row[6];
-+ @@ a2 += W2*row[6];
-+ subne r4, r4, r11 @ R4-=W6*ROWr16[6] (a3)
-+ subne r2, r2, r10 @ R2-=W2*ROWr16[6] (a1)
-+ addne r3, r3, r10 @ R3+=W2*ROWr16[6] (a2)
-+__end_a_evaluation2:
-+ @@ at this point, R0=b0, R1=b1, R2=a1, R3=a2, R4=a3,
-+ @@ R5=b2, R6=a0, R7=b3, R8 (free), R9 (free), R10 (free), R11 (free),
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ @@ col[0 ] = ((a0 + b0) >> COL_SHIFT);
-+ @@ col[8 ] = ((a1 + b1) >> COL_SHIFT);
-+ @@ col[16] = ((a2 + b2) >> COL_SHIFT);
-+ @@ col[24] = ((a3 + b3) >> COL_SHIFT);
-+ @@ col[32] = ((a3 - b3) >> COL_SHIFT);
-+ @@ col[40] = ((a2 - b2) >> COL_SHIFT);
-+ @@ col[48] = ((a1 - b1) >> COL_SHIFT);
-+ @@ col[56] = ((a0 - b0) >> COL_SHIFT);
-+ @@@@@ no optimisation here @@@@@
-+ add r8, r6, r0 @ R8=a0+b0
-+ add r9, r2, r1 @ R9=a1+b1
-+ mov r8, r8, asr #COL_SHIFT
-+ mov r9, r9, asr #COL_SHIFT
-+ strh r8, [r14, #0]
-+ strh r9, [r14, #16]
-+ add r8, r3, r5 @ R8=a2+b2
-+ add r9, r4, r7 @ R9=a3+b3
-+ mov r8, r8, asr #COL_SHIFT
-+ mov r9, r9, asr #COL_SHIFT
-+ strh r8, [r14, #32]
-+ strh r9, [r14, #48]
-+ sub r8, r4, r7 @ R8=a3-b3
-+ sub r9, r3, r5 @ R9=a2-b2
-+ mov r8, r8, asr #COL_SHIFT
-+ mov r9, r9, asr #COL_SHIFT
-+ strh r8, [r14, #64]
-+ strh r9, [r14, #80]
-+ sub r8, r2, r1 @ R8=a1-b1
-+ sub r9, r6, r0 @ R9=a0-b0
-+ mov r8, r8, asr #COL_SHIFT
-+ mov r9, r9, asr #COL_SHIFT
-+ strh r8, [r14, #96]
-+ strh r9, [r14, #112]
-+
-+__end_col_loop:
-+ @@ at this point, R0-R11 (free)
-+ @@ R12=__const_ptr_, R14=&block[n]
-+ ldr r0, [sp, #0] @ R0=block
-+ teq r0, r14 @ compare current &block[n] to block, when block is reached, the loop is finished.
-+ sub r14, r14, #2
-+ bne __col_loop
-+
-+
-+
-+
-+__end_simple_idct_ARM:
-+ @@ restore registers to previous status!
-+ add sp, sp, #8 @@ the local variables!
-+ ldmfd sp!, {r4-r11, r15} @@ update PC with LR content.
-+
-+
-+
-+@@ kind of sub-function, here not to overload the common case.
-+__end_bef_a_evaluation:
-+ add r2, r6, r11 @ R2=a0+W6*ROWr16[2] (a1)
-+ mul r11, r8, r4 @ R11=W2*ROWr16[2]
-+ sub r4, r6, r11 @ R4=a0-W2*ROWr16[2] (a3)
-+ add r6, r6, r11 @ R6=a0+W2*ROWr16[2] (a0)
-+ bal __end_a_evaluation
-
-- mov lr, r0 @ lr = pointer to the current row
-- mov r12, #8 @ r12 = row-counter
-- add r11, pc, #(const_array-.-8) @ r11 = base pointer to the constants array
--row_loop:
-- ldrsh r0, [lr, # 0] @ r0 = 'd0'
-- ldrsh r1, [lr, # 8] @ r1 = 'd1'
--
-- @ Optimization for row that have all items except the first set to 0
-- @ (this works as the DCTELEMS are always 4-byte aligned)
-- ldr r5, [lr, # 0]
-- ldr r2, [lr, # 4]
-- ldr r3, [lr, # 8]
-- ldr r4, [lr, #12]
-- orr r3, r3, r4
-- orr r3, r3, r2
-- orrs r5, r3, r5
-- beq end_of_row_loop @ nothing to be done as ALL of them are '0'
-- orrs r2, r3, r1
-- beq empty_row
--
-- ldrsh r2, [lr, # 2] @ r2 = 'd2'
-- ldrsh r4, [lr, # 4] @ r4 = 'd4'
-- ldrsh r6, [lr, # 6] @ r6 = 'd6'
--
-- ldr r3, [r11, #FIX_0_541196100_ID]
-- add r7, r2, r6
-- ldr r5, [r11, #FIX_M_1_847759065_ID]
-- mul r7, r3, r7 @ r7 = z1
-- ldr r3, [r11, #FIX_0_765366865_ID]
-- mla r6, r5, r6, r7 @ r6 = tmp2
-- add r5, r0, r4 @ r5 = tmp0
-- mla r2, r3, r2, r7 @ r2 = tmp3
-- sub r3, r0, r4 @ r3 = tmp1
--
-- add r0, r2, r5, lsl #13 @ r0 = tmp10
-- rsb r2, r2, r5, lsl #13 @ r2 = tmp13
-- add r4, r6, r3, lsl #13 @ r4 = tmp11
-- rsb r3, r6, r3, lsl #13 @ r3 = tmp12
--
-- stmdb sp!, { r0, r2, r3, r4 } @ save on the stack tmp10, tmp13, tmp12, tmp11
--
-- ldrsh r3, [lr, #10] @ r3 = 'd3'
-- ldrsh r5, [lr, #12] @ r5 = 'd5'
-- ldrsh r7, [lr, #14] @ r7 = 'd7'
--
-- add r0, r3, r5 @ r0 = 'z2'
-- add r2, r1, r7 @ r2 = 'z1'
-- add r4, r3, r7 @ r4 = 'z3'
-- add r6, r1, r5 @ r6 = 'z4'
-- ldr r9, [r11, #FIX_1_175875602_ID]
-- add r8, r4, r6 @ r8 = z3 + z4
-- ldr r10, [r11, #FIX_M_0_899976223_ID]
-- mul r8, r9, r8 @ r8 = 'z5'
-- ldr r9, [r11, #FIX_M_2_562915447_ID]
-- mul r2, r10, r2 @ r2 = 'z1'
-- ldr r10, [r11, #FIX_M_1_961570560_ID]
-- mul r0, r9, r0 @ r0 = 'z2'
-- ldr r9, [r11, #FIX_M_0_390180644_ID]
-- mla r4, r10, r4, r8 @ r4 = 'z3'
-- ldr r10, [r11, #FIX_0_298631336_ID]
-- mla r6, r9, r6, r8 @ r6 = 'z4'
-- ldr r9, [r11, #FIX_2_053119869_ID]
-- mla r7, r10, r7, r2 @ r7 = tmp0 + z1
-- ldr r10, [r11, #FIX_3_072711026_ID]
-- mla r5, r9, r5, r0 @ r5 = tmp1 + z2
-- ldr r9, [r11, #FIX_1_501321110_ID]
-- mla r3, r10, r3, r0 @ r3 = tmp2 + z2
-- add r7, r7, r4 @ r7 = tmp0
-- mla r1, r9, r1, r2 @ r1 = tmp3 + z1
-- add r5, r5, r6 @ r5 = tmp1
-- add r3, r3, r4 @ r3 = tmp2
-- add r1, r1, r6 @ r1 = tmp3
--
-- ldmia sp!, { r0, r2, r4, r6 } @ r0 = tmp10 / r2 = tmp13 / r4 = tmp12 / r6 = tmp11
-- @ r1 = tmp3 / r3 = tmp2 / r5 = tmp1 / r7 = tmp0
--
-- @ Compute DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS)
-- add r8, r0, r1
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, # 0]
--
-- @ Compute DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS)
-- sub r8, r0, r1
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, #14]
--
-- @ Compute DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS)
-- add r8, r6, r3
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, # 2]
--
-- @ Compute DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS)
-- sub r8, r6, r3
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, #12]
--
-- @ Compute DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS)
-- add r8, r4, r5
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, # 4]
--
-- @ Compute DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS)
-- sub r8, r4, r5
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, #10]
--
-- @ Compute DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS)
-- add r8, r2, r7
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, # 6]
--
-- @ Compute DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS)
-- sub r8, r2, r7
-- add r8, r8, #(1<<10)
-- mov r8, r8, asr #11
-- strh r8, [lr, # 8]
--
-- @ End of row loop
-- add lr, lr, #16
-- subs r12, r12, #1
-- bne row_loop
-- beq start_column_loop
--
--empty_row:
-- ldr r1, [r11, #FIX_0xFFFF_ID]
-- mov r0, r0, lsl #2
-- and r0, r0, r1
-- add r0, r0, r0, lsl #16
-- str r0, [lr, # 0]
-- str r0, [lr, # 4]
-- str r0, [lr, # 8]
-- str r0, [lr, #12]
--
--end_of_row_loop:
-- @ End of loop
-- add lr, lr, #16
-- subs r12, r12, #1
-- bne row_loop
--
--start_column_loop:
-- @ Start of column loop
-- ldr lr, [ sp ]
-- mov r12, #8
--column_loop:
-- ldrsh r0, [lr, #( 0*8)] @ r0 = 'd0'
-- ldrsh r2, [lr, #( 4*8)] @ r2 = 'd2'
-- ldrsh r4, [lr, #( 8*8)] @ r4 = 'd4'
-- ldrsh r6, [lr, #(12*8)] @ r6 = 'd6'
--
-- ldr r3, [r11, #FIX_0_541196100_ID]
-- add r1, r2, r6
-- ldr r5, [r11, #FIX_M_1_847759065_ID]
-- mul r1, r3, r1 @ r1 = z1
-- ldr r3, [r11, #FIX_0_765366865_ID]
-- mla r6, r5, r6, r1 @ r6 = tmp2
-- add r5, r0, r4 @ r5 = tmp0
-- mla r2, r3, r2, r1 @ r2 = tmp3
-- sub r3, r0, r4 @ r3 = tmp1
--
-- add r0, r2, r5, lsl #13 @ r0 = tmp10
-- rsb r2, r2, r5, lsl #13 @ r2 = tmp13
-- add r4, r6, r3, lsl #13 @ r4 = tmp11
-- rsb r6, r6, r3, lsl #13 @ r6 = tmp12
--
-- ldrsh r1, [lr, #( 2*8)] @ r1 = 'd1'
-- ldrsh r3, [lr, #( 6*8)] @ r3 = 'd3'
-- ldrsh r5, [lr, #(10*8)] @ r5 = 'd5'
-- ldrsh r7, [lr, #(14*8)] @ r7 = 'd7'
--
-- @ Check for empty odd column (happens about 20 to 25 % of the time according to my stats)
-- orr r9, r1, r3
-- orr r10, r5, r7
-- orrs r10, r9, r10
-- beq empty_odd_column
--
-- stmdb sp!, { r0, r2, r4, r6 } @ save on the stack tmp10, tmp13, tmp12, tmp11
--
-- add r0, r3, r5 @ r0 = 'z2'
-- add r2, r1, r7 @ r2 = 'z1'
-- add r4, r3, r7 @ r4 = 'z3'
-- add r6, r1, r5 @ r6 = 'z4'
-- ldr r9, [r11, #FIX_1_175875602_ID]
-- add r8, r4, r6
-- ldr r10, [r11, #FIX_M_0_899976223_ID]
-- mul r8, r9, r8 @ r8 = 'z5'
-- ldr r9, [r11, #FIX_M_2_562915447_ID]
-- mul r2, r10, r2 @ r2 = 'z1'
-- ldr r10, [r11, #FIX_M_1_961570560_ID]
-- mul r0, r9, r0 @ r0 = 'z2'
-- ldr r9, [r11, #FIX_M_0_390180644_ID]
-- mla r4, r10, r4, r8 @ r4 = 'z3'
-- ldr r10, [r11, #FIX_0_298631336_ID]
-- mla r6, r9, r6, r8 @ r6 = 'z4'
-- ldr r9, [r11, #FIX_2_053119869_ID]
-- mla r7, r10, r7, r2 @ r7 = tmp0 + z1
-- ldr r10, [r11, #FIX_3_072711026_ID]
-- mla r5, r9, r5, r0 @ r5 = tmp1 + z2
-- ldr r9, [r11, #FIX_1_501321110_ID]
-- mla r3, r10, r3, r0 @ r3 = tmp2 + z2
-- add r7, r7, r4 @ r7 = tmp0
-- mla r1, r9, r1, r2 @ r1 = tmp3 + z1
-- add r5, r5, r6 @ r5 = tmp1
-- add r3, r3, r4 @ r3 = tmp2
-- add r1, r1, r6 @ r1 = tmp3
--
-- ldmia sp!, { r0, r2, r4, r6 } @ r0 = tmp10 / r2 = tmp13 / r4 = tmp11 / r6 = tmp12
-- @ r1 = tmp3 / r3 = tmp2 / r5 = tmp1 / r7 = tmp0
--
-- @ Compute DESCALE(tmp10 + tmp3, CONST_BITS+PASS1_BITS+3)
-- add r8, r0, r1
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #( 0*8)]
--
-- @ Compute DESCALE(tmp10 - tmp3, CONST_BITS+PASS1_BITS+3)
-- sub r8, r0, r1
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #(14*8)]
--
-- @ Compute DESCALE(tmp11 + tmp2, CONST_BITS+PASS1_BITS+3)
-- add r8, r4, r3
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #( 2*8)]
--
-- @ Compute DESCALE(tmp11 - tmp2, CONST_BITS+PASS1_BITS+3)
-- sub r8, r4, r3
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #(12*8)]
--
-- @ Compute DESCALE(tmp12 + tmp1, CONST_BITS+PASS1_BITS+3)
-- add r8, r6, r5
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #( 4*8)]
--
-- @ Compute DESCALE(tmp12 - tmp1, CONST_BITS+PASS1_BITS+3)
-- sub r8, r6, r5
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #(10*8)]
--
-- @ Compute DESCALE(tmp13 + tmp0, CONST_BITS+PASS1_BITS+3)
-- add r8, r2, r7
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #( 6*8)]
--
-- @ Compute DESCALE(tmp13 - tmp0, CONST_BITS+PASS1_BITS+3)
-- sub r8, r2, r7
-- add r8, r8, #(1<<17)
-- mov r8, r8, asr #18
-- strh r8, [lr, #( 8*8)]
--
-- @ End of row loop
-- add lr, lr, #2
-- subs r12, r12, #1
-- bne column_loop
-- beq the_end
--
--empty_odd_column:
-- @ Compute DESCALE(tmp10 + tmp3, CONST_BITS+PASS1_BITS+3)
-- @ Compute DESCALE(tmp10 - tmp3, CONST_BITS+PASS1_BITS+3)
-- add r0, r0, #(1<<17)
-- mov r0, r0, asr #18
-- strh r0, [lr, #( 0*8)]
-- strh r0, [lr, #(14*8)]
--
-- @ Compute DESCALE(tmp11 + tmp2, CONST_BITS+PASS1_BITS+3)
-- @ Compute DESCALE(tmp11 - tmp2, CONST_BITS+PASS1_BITS+3)
-- add r4, r4, #(1<<17)
-- mov r4, r4, asr #18
-- strh r4, [lr, #( 2*8)]
-- strh r4, [lr, #(12*8)]
--
-- @ Compute DESCALE(tmp12 + tmp1, CONST_BITS+PASS1_BITS+3)
-- @ Compute DESCALE(tmp12 - tmp1, CONST_BITS+PASS1_BITS+3)
-- add r6, r6, #(1<<17)
-- mov r6, r6, asr #18
-- strh r6, [lr, #( 4*8)]
-- strh r6, [lr, #(10*8)]
--
-- @ Compute DESCALE(tmp13 + tmp0, CONST_BITS+PASS1_BITS+3)
-- @ Compute DESCALE(tmp13 - tmp0, CONST_BITS+PASS1_BITS+3)
-- add r2, r2, #(1<<17)
-- mov r2, r2, asr #18
-- strh r2, [lr, #( 6*8)]
-- strh r2, [lr, #( 8*8)]
--
-- @ End of row loop
-- add lr, lr, #2
-- subs r12, r12, #1
-- bne column_loop
--
--the_end:
-- @ The end....
-- add sp, sp, #4
-- ldmia sp!, { r4 - r12, pc } @ restore callee saved regs and return
-
--const_array:
-+__constant_ptr__: @@ see #defines at the beginning of the source code for values.
- .align
-- .word FIX_0_298631336
-- .word FIX_0_541196100
-- .word FIX_0_765366865
-- .word FIX_1_175875602
-- .word FIX_1_501321110
-- .word FIX_2_053119869
-- .word FIX_3_072711026
-- .word FIX_M_0_390180644
-- .word FIX_M_0_899976223
-- .word FIX_M_1_847759065
-- .word FIX_M_1_961570560
-- .word FIX_M_2_562915447
-- .word FIX_0xFFFF
-+ .word W1
-+ .word W2
-+ .word W3
-+ .word W4
-+ .word W5
-+ .word W6
-+ .word W7
-+ .word MASK_MSHW
-+
-+
git.openpandora.org / openembedded.git / commitdiff