See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
- acpi= [HW,ACPI] Advanced Configuration and Power Interface
+ acpi= [HW,ACPI,X86-64,i386]
+ Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
L: linux-kernel@vger.kernel.org
S: Maintained
-DEVICE FILESYSTEM
-S: Obsolete
-
DIGI INTL. EPCA DRIVER
P: Digi International, Inc
M: Eng.Linux@digi.com
"ASUS A7V ACPI BIOS Revision 1007"),
},
},
-
+ {
+ /*
+ * Latest BIOS for IBM 600E (1.16) has bad pcinum
+ * for LPC bridge, which is needed for the PCI
+ * interrupt links to work. DSDT fix is in bug 5966.
+ * 2645, 2646 model numbers are shared with 600/600E/600X
+ */
+ .callback = disable_acpi_irq,
+ .ident = "IBM Thinkpad 600 Series 2645",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2645"),
+ },
+ },
+ {
+ .callback = disable_acpi_irq,
+ .ident = "IBM Thinkpad 600 Series 2646",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2646"),
+ },
+ },
/*
* Boxes that need ACPI PCI IRQ routing and PCI scan disabled
*/
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 15:49:18 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 8 11:07:09 2007
#
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IA64=y
CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
+CONFIG_AUDIT_ARCH=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_SCHED_SMT is not set
CONFIG_PERMIT_BSP_REMOVE=y
CONFIG_FORCE_CPEI_RETARGET=y
-# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_IA32_SUPPORT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_ESI is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
#
# Firmware Drivers
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_FC=y
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
+# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_DRM=m
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
#
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
-# EDAC - error detection and reporting (RAS)
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
#
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+# CONFIG_MSPEC is not set
+
#
# File systems
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 15:55:36 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 8 11:04:20 2007
#
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
+CONFIG_STOP_MACHINE=y
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IA64=y
CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
CONFIG_MMU=y
-CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
+CONFIG_AUDIT_ARCH=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_ZX1=y
# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=16
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SCHED_SMT is not set
+# CONFIG_PERMIT_BSP_REMOVE is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_IA32_SUPPORT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_ESI is not set
+# CONFIG_KEXEC is not set
+CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=y
#
# CPU Frequency scaling
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
CONFIG_AGP=y
CONFIG_AGP_HP_ZX1=y
CONFIG_DRM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_HWMON_VID is not set
#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
#
-# Video For Linux
+# Video Capture Adapters
#
#
-# Video Adapters
+# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
#
# Radio Adapters
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# PCI devices
#
# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=y
-CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_FM801_TEA575X_BOOL is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
#
# USB DSL modem support
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
-# EDAC - error detection and reporting (RAS)
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+# CONFIG_MSPEC is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
#
# Instrumentation Support
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 16:02:28 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 8 11:01:03 2007
#
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IA64=y
CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
+CONFIG_AUDIT_ARCH=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=512
-CONFIG_IA64_NR_NODES=256
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SCHED_SMT is not set
+# CONFIG_PERMIT_BSP_REMOVE is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=10
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_SGI_SN=y
+# CONFIG_IA64_ESI is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC3=m
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+#
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
+# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
#
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# PCI devices
#
# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_FM801_TEA575X_BOOL is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
#
# CONFIG_MMC is not set
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
+# CONFIG_INFINIBAND_ISER is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
#
-CONFIG_SGI_IOC4=y
-CONFIG_SGI_IOC3=m
#
-# EDAC - error detection and reporting (RAS)
+# Virtualization
#
+# CONFIG_MSPEC is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
#
# HP Simulator drivers
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
#include <asm/mca.h>
int kdump_status[NR_CPUS];
-atomic_t kdump_cpu_freezed;
+static atomic_t kdump_cpu_frozen;
atomic_t kdump_in_progress;
-int kdump_on_init = 1;
+static int kdump_on_init = 1;
static inline Elf64_Word
*append_elf_note(Elf64_Word *buf, char *name, unsigned type, void *data,
int cpu_num = num_online_cpus() - 1;
int timeout = 1000;
while(timeout-- > 0) {
- if (atomic_read(&kdump_cpu_freezed) == cpu_num)
+ if (atomic_read(&kdump_cpu_frozen) == cpu_num)
return 0;
udelay(1000);
}
kexec_disable_iosapic();
#ifdef CONFIG_SMP
kdump_smp_send_stop();
+ /* not all cpu response to IPI, send INIT to freeze them */
if (kdump_wait_cpu_freeze() && kdump_on_init) {
- //not all cpu response to IPI, send INIT to freeze them
kdump_smp_send_init();
}
#endif
cpuid = smp_processor_id();
crash_save_this_cpu();
current->thread.ksp = (__u64)info->sw - 16;
- atomic_inc(&kdump_cpu_freezed);
+ atomic_inc(&kdump_cpu_frozen);
kdump_status[cpuid] = 1;
mb();
#ifdef CONFIG_HOTPLUG_CPU
/* find a block of memory aligned to 64M exclude reserved regions
rsvd_regions are sorted
*/
-unsigned long
+unsigned long __init
kdump_find_rsvd_region (unsigned long size,
struct rsvd_region *r, int n)
{
ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
struct ia64_sal_os_state *sos)
{
- pal_processor_state_info_t *psp = (pal_processor_state_info_t *)
- &sos->proc_state_param;
int recover, cpu = smp_processor_id();
struct task_struct *previous_current;
struct ia64_mca_notify_die nd =
/* Get the MCA error record and log it */
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
- /* TLB error is only exist in this SAL error record */
- recover = (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc))
- /* other error recovery */
- || (ia64_mca_ucmc_extension
+ /* MCA error recovery */
+ recover = (ia64_mca_ucmc_extension
&& ia64_mca_ucmc_extension(
IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA),
sos));
default:
break;
}
+ } else if (psp->cc && !psp->bc) { /* Cache error */
+ status = recover_from_read_error(slidx, peidx, pbci, sos);
}
return status;
}
+/*
+ * recover_from_tlb_check
+ * @peidx: pointer of index of processor error section
+ *
+ * Return value:
+ * 1 on Success / 0 on Failure
+ */
+static int
+recover_from_tlb_check(peidx_table_t *peidx)
+{
+ sal_log_mod_error_info_t *smei;
+ pal_tlb_check_info_t *ptci;
+
+ smei = (sal_log_mod_error_info_t *)peidx_tlb_check(peidx, 0);
+ ptci = (pal_tlb_check_info_t *)&(smei->check_info);
+
+ /*
+ * Look for signature of a duplicate TLB DTC entry, which is
+ * a SW bug and always fatal.
+ */
+ if (ptci->op == PAL_TLB_CHECK_OP_PURGE
+ && !(ptci->itr || ptci->dtc || ptci->itc))
+ return fatal_mca("Duplicate TLB entry");
+
+ return mca_recovered("TLB check recovered");
+}
+
/**
* recover_from_processor_error
* @platform: whether there are some platform error section or not
* Return value:
* 1 on Success / 0 on Failure
*/
-/*
- * Later we try to recover when below all conditions are satisfied.
- * 1. Only one processor error section is exist.
- * 2. BUS_CHECK is exist and the others are not exist.(Except TLB_CHECK)
- * 3. The entry of BUS_CHECK_INFO is 1.
- * 4. "External bus error" flag is set and the others are not set.
- */
static int
recover_from_processor_error(int platform, slidx_table_t *slidx,
if (psp->us || psp->ci == 0)
return fatal_mca("error not contained");
+ /*
+ * Look for recoverable TLB check
+ */
+ if (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc))
+ return recover_from_tlb_check(peidx);
+
/*
* The cache check and bus check bits have four possible states
* cc bc
- * 0 0 Weird record, not recovered
- * 1 0 Cache error, not recovered
- * 0 1 I/O error, attempt recovery
* 1 1 Memory error, attempt recovery
+ * 1 0 Cache error, attempt recovery
+ * 0 1 I/O error, attempt recovery
+ * 0 0 Other error type, not recovered
*/
- if (psp->bc == 0 || pbci == NULL)
- return fatal_mca("No bus check");
+ if (psp->cc == 0 && (psp->bc == 0 || pbci == NULL))
+ return fatal_mca("No cache or bus check");
/*
- * Sorry, we cannot handle so many.
+ * Cannot handle more than one bus check.
*/
if (peidx_bus_check_num(peidx) > 1)
return fatal_mca("Too many bus checks");
- /*
- * Well, here is only one bus error.
- */
+
if (pbci->ib)
return fatal_mca("Internal Bus error");
- if (pbci->cc)
- return fatal_mca("Cache-cache error");
if (pbci->eb && pbci->bsi > 0)
return fatal_mca("External bus check fatal status");
/*
- * This is a local MCA and estimated as recoverble external bus error.
- * (e.g. a load from poisoned memory)
- * This means "there are some platform errors".
+ * This is a local MCA and estimated as a recoverble error.
*/
if (platform)
return recover_from_platform_error(slidx, peidx, pbci, sos);
+
/*
* On account of strange SAL error record, we cannot recover.
*/
case PTRACE_DETACH:
/* detach a process that was attached. */
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
ret = ptrace_detach(child, data);
goto out_tsk;
}
/*
- * sn_hubdev_add - The 'add' function of the acpi_sn_hubdev_driver.
- * Called for every "SGIHUB" or "SGITIO" device defined
- * in the ACPI namespace.
+ * sn_acpi_hubdev_init() - This function is called by acpi_ns_get_device_callback()
+ * for all SGIHUB and SGITIO acpi devices defined in the
+ * DSDT. It obtains the hubdev_info pointer from the
+ * ACPI vendor resource, which the PROM setup, and sets up the
+ * hubdev_info in the pda.
*/
-static int __init
-sn_hubdev_add(struct acpi_device *device)
+
+static acpi_status __init
+sn_acpi_hubdev_init(acpi_handle handle, u32 depth, void *context, void **ret)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
u64 addr;
int i;
u64 nasid;
struct acpi_resource *resource;
- int ret = 0;
acpi_status status;
struct acpi_resource_vendor_typed *vendor;
extern void sn_common_hubdev_init(struct hubdev_info *);
- status = acpi_get_vendor_resource(device->handle, METHOD_NAME__CRS,
+ status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
&sn_uuid, &buffer);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
- "sn_hubdev_add: acpi_get_vendor_resource() failed: %d\n",
- status);
- return 1;
+ "sn_acpi_hubdev_init: acpi_get_vendor_resource() "
+ "(0x%x) failed for: ", status);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
+ return AE_OK; /* Continue walking namespace */
}
resource = buffer.pointer;
if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
sizeof(struct hubdev_info *)) {
printk(KERN_ERR
- "sn_hubdev_add: Invalid vendor data length: %d\n",
+ "sn_acpi_hubdev_init: Invalid vendor data length: %d for: ",
vendor->byte_length);
- ret = 1;
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
goto exit;
}
exit:
kfree(buffer.pointer);
- return ret;
+ return AE_OK; /* Continue walking namespace */
}
/*
EXPORT_SYMBOL(sn_acpi_slot_fixup);
-static struct acpi_driver acpi_sn_hubdev_driver = {
- .name = "SGI HUBDEV Driver",
- .ids = "SGIHUB,SGITIO",
- .ops = {
- .add = sn_hubdev_add,
- },
-};
-
/*
* sn_acpi_bus_fixup - Perform SN specific setup of software structs
/* SN Altix does not follow the IOSAPIC IRQ routing model */
acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
- acpi_bus_register_driver(&acpi_sn_hubdev_driver);
+ /* Setup hubdev_info for all SGIHUB/SGITIO devices */
+ acpi_get_devices("SGIHUB", sn_acpi_hubdev_init, NULL, NULL);
+ acpi_get_devices("SGITIO", sn_acpi_hubdev_init, NULL, NULL);
+
status = sal_ioif_init(&result);
if (status || result)
panic("sal_ioif_init failed: [%lx] %s\n",
ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
+ /* Load the new DSDT and SSDT tables into the global table list. */
+ acpi_table_init();
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
/*
config SIBYTE_SB1250
bool
select HW_HAS_PCI
- select SIBYTE_HAS_LDT
+ select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
config SIBYTE_BCM1120
bool
select SIBYTE_BCM112X
+ select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM1125
bool
select HW_HAS_PCI
select SIBYTE_BCM112X
+ select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM1125H
bool
select HW_HAS_PCI
select SIBYTE_BCM112X
- select SIBYTE_HAS_LDT
+ select SIBYTE_ENABLE_LDT_IF_PCI
+ select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM112X
bool
select SIBYTE_SB1xxx_SOC
+ select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80
bool
bool
select HW_HAS_PCI
select SIBYTE_SB1xxx_SOC
+ select SIBYTE_HAS_ZBUS_PROFILING
select SYS_SUPPORTS_SMP
config SIBYTE_SB1xxx_SOC
config SIBYTE_HAS_LDT
bool
- depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
- default y
+
+config SIBYTE_ENABLE_LDT_IF_PCI
+ bool
+ select SIBYTE_HAS_LDT if PCI
config SIMULATION
bool "Running under simulation"
depends on SIBYTE_SB1xxx_SOC
config SIBYTE_TBPROF
- bool "Support for ZBbus profiling"
- depends on SIBYTE_SB1xxx_SOC
+ tristate "Support for ZBbus profiling"
+ depends on SIBYTE_HAS_ZBUS_PROFILING
+
+config SIBYTE_HAS_ZBUS_PROFILING
+ bool
/*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
*/
-#define SBPROF_TB_DEBUG 0
+#undef DEBUG
+#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/smp_lock.h>
+#include <linux/types.h>
#include <linux/wait.h>
-#include <asm/uaccess.h>
+
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/trace_prof.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
-#define DEVNAME "bcm1250_tbprof"
+#define SBPROF_TB_MAJOR 240
+
+typedef u64 tb_sample_t[6*256];
+
+enum open_status {
+ SB_CLOSED,
+ SB_OPENING,
+ SB_OPEN
+};
+
+struct sbprof_tb {
+ wait_queue_head_t tb_sync;
+ wait_queue_head_t tb_read;
+ struct mutex lock;
+ enum open_status open;
+ tb_sample_t *sbprof_tbbuf;
+ int next_tb_sample;
+
+ volatile int tb_enable;
+ volatile int tb_armed;
+
+};
static struct sbprof_tb sbp;
+#define MAX_SAMPLE_BYTES (24*1024*1024)
+#define MAX_TBSAMPLE_BYTES (12*1024*1024)
+
+#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
+#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
+#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
+
+/* ioctls */
+#define SBPROF_ZBSTART _IOW('s', 0, int)
+#define SBPROF_ZBSTOP _IOW('s', 1, int)
+#define SBPROF_ZBWAITFULL _IOW('s', 2, int)
+
+/*
+ * Routines for using 40-bit SCD cycle counter
+ *
+ * Client responsible for either handling interrupts or making sure
+ * the cycles counter never saturates, e.g., by doing
+ * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
+ */
+
+/*
+ * Configures SCD counter 0 to count ZCLKs starting from val;
+ * Configures SCD counters1,2,3 to count nothing.
+ * Must not be called while gathering ZBbus profiles.
+ */
+
+#define zclk_timer_init(val) \
+ __asm__ __volatile__ (".set push;" \
+ ".set mips64;" \
+ "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+ "sd %0, 0x10($8);" /* write val to counter0 */ \
+ "sd %1, 0($8);" /* config counter0 for zclks*/ \
+ ".set pop" \
+ : /* no outputs */ \
+ /* enable, counter0 */ \
+ : /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
+ : /* modifies */ "$8" )
+
+
+/* Reads SCD counter 0 and puts result in value
+ unsigned long long val; */
+#define zclk_get(val) \
+ __asm__ __volatile__ (".set push;" \
+ ".set mips64;" \
+ "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+ "ld %0, 0x10($8);" /* write val to counter0 */ \
+ ".set pop" \
+ : /* outputs */ "=r"(val) \
+ : /* inputs */ \
+ : /* modifies */ "$8" )
+
+#define DEVNAME "bcm1250_tbprof"
+
#define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
-/************************************************************************
+/*
* Support for ZBbus sampling using the trace buffer
*
* We use the SCD performance counter interrupt, caused by a Zclk counter
* overflow.
*
* We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
- *
- ************************************************************************/
+ */
-static u_int64_t tb_period;
+static u64 tb_period;
static void arm_tb(void)
{
- u_int64_t scdperfcnt;
- u_int64_t next = (1ULL << 40) - tb_period;
- u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
- /* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
- trigger start of trace. XXX vary sampling period */
+ u64 scdperfcnt;
+ u64 next = (1ULL << 40) - tb_period;
+ u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
+
+ /*
+ * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger
+ *start of trace. XXX vary sampling period
+ */
__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
- /* Unfortunately, in Pass 2 we must clear all counters to knock down
- a previous interrupt request. This means that bus profiling
- requires ALL of the SCD perf counters. */
+
+ /*
+ * Unfortunately, in Pass 2 we must clear all counters to knock down a
+ * previous interrupt request. This means that bus profiling requires
+ * ALL of the SCD perf counters.
+ */
__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
- // keep counters 0,2,3 as is
- M_SPC_CFG_ENABLE | // enable counting
- M_SPC_CFG_CLEAR | // clear all counters
- V_SPC_CFG_SRC1(1), // counter 1 counts cycles
+ /* keep counters 0,2,3 as is */
+ M_SPC_CFG_ENABLE | /* enable counting */
+ M_SPC_CFG_CLEAR | /* clear all counters */
+ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
IOADDR(A_SCD_PERF_CNT_CFG));
__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+
/* Reset the trace buffer */
__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
{
int i;
- DBG(printk(DEVNAME ": tb_intr\n"));
+
+ pr_debug(DEVNAME ": tb_intr\n");
+
if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
/* XXX should use XKPHYS to make writes bypass L2 */
- u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
+ u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
/* Read out trace */
__raw_writeq(M_SCD_TRACE_CFG_START_READ,
IOADDR(A_SCD_TRACE_CFG));
__asm__ __volatile__ ("sync" : : : "memory");
/* Loop runs backwards because bundles are read out in reverse order */
for (i = 256 * 6; i > 0; i -= 6) {
- // Subscripts decrease to put bundle in the order
- // t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
+ /* Subscripts decrease to put bundle in the order */
+ /* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- // read t2 hi
+ /* read t2 hi */
p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- // read t2 lo
+ /* read t2 lo */
p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- // read t1 hi
+ /* read t1 hi */
p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- // read t1 lo
+ /* read t1 lo */
p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- // read t0 hi
+ /* read t0 hi */
p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- // read t0 lo
+ /* read t0 lo */
}
if (!sbp.tb_enable) {
- DBG(printk(DEVNAME ": tb_intr shutdown\n"));
+ pr_debug(DEVNAME ": tb_intr shutdown\n");
__raw_writeq(M_SCD_TRACE_CFG_RESET,
IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
wake_up(&sbp.tb_sync);
} else {
- arm_tb(); // knock down current interrupt and get another one later
+ arm_tb(); /* knock down current interrupt and get another one later */
}
} else {
/* No more trace buffer samples */
- DBG(printk(DEVNAME ": tb_intr full\n"));
+ pr_debug(DEVNAME ": tb_intr full\n");
__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
if (!sbp.tb_enable) {
}
wake_up(&sbp.tb_read);
}
+
return IRQ_HANDLED;
}
return IRQ_NONE;
}
-int sbprof_zbprof_start(struct file *filp)
+/*
+ * Requires: Already called zclk_timer_init with a value that won't
+ * saturate 40 bits. No subsequent use of SCD performance counters
+ * or trace buffer.
+ */
+
+static int sbprof_zbprof_start(struct file *filp)
{
- u_int64_t scdperfcnt;
+ u64 scdperfcnt;
+ int err;
- if (sbp.tb_enable)
+ if (xchg(&sbp.tb_enable, 1))
return -EBUSY;
- DBG(printk(DEVNAME ": starting\n"));
+ pr_debug(DEVNAME ": starting\n");
- sbp.tb_enable = 1;
sbp.next_tb_sample = 0;
filp->f_pos = 0;
- if (request_irq
- (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, DEVNAME " trace freeze", &sbp)) {
+ err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
+ DEVNAME " trace freeze", &sbp);
+ if (err)
return -EBUSY;
- }
+
/* Make sure there isn't a perf-cnt interrupt waiting */
scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Disable and clear counters, override SRC_1 */
M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
IOADDR(A_SCD_PERF_CNT_CFG));
- /* We grab this interrupt to prevent others from trying to use
- it, even though we don't want to service the interrupts
- (they only feed into the trace-on-interrupt mechanism) */
- if (request_irq
- (K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
- free_irq(K_INT_TRACE_FREEZE, &sbp);
- return -EBUSY;
- }
-
- /* I need the core to mask these, but the interrupt mapper to
- pass them through. I am exploiting my knowledge that
- cp0_status masks out IP[5]. krw */
+ /*
+ * We grab this interrupt to prevent others from trying to use it, even
+ * though we don't want to service the interrupts (they only feed into
+ * the trace-on-interrupt mechanism)
+ */
+ err = request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0,
+ DEVNAME " scd perfcnt", &sbp);
+ if (err)
+ goto out_free_irq;
+
+ /*
+ * I need the core to mask these, but the interrupt mapper to pass them
+ * through. I am exploiting my knowledge that cp0_status masks out
+ * IP[5]. krw
+ */
__raw_writeq(K_INT_MAP_I3,
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
(K_INT_PERF_CNT << 3)));
__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
/* Initialize Trace Event 0-7 */
- // when interrupt
+ /* when interrupt */
__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
/* Initialize Trace Sequence 0-7 */
- // Start on event 0 (interrupt)
+ /* Start on event 0 (interrupt) */
__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
IOADDR(A_SCD_TRACE_SEQUENCE_0));
- // dsamp when d used | asamp when a used
+ /* dsamp when d used | asamp when a used */
__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
K_SCD_TRSEQ_TRIGGER_ALL,
IOADDR(A_SCD_TRACE_SEQUENCE_1));
arm_tb();
- DBG(printk(DEVNAME ": done starting\n"));
+ pr_debug(DEVNAME ": done starting\n");
return 0;
+
+out_free_irq:
+ free_irq(K_INT_TRACE_FREEZE, &sbp);
+
+ return err;
}
-int sbprof_zbprof_stop(void)
+static int sbprof_zbprof_stop(void)
{
- DEFINE_WAIT(wait);
- DBG(printk(DEVNAME ": stopping\n"));
+ int err;
+
+ pr_debug(DEVNAME ": stopping\n");
if (sbp.tb_enable) {
+ /*
+ * XXXKW there is a window here where the intr handler may run,
+ * see the disable, and do the wake_up before this sleep
+ * happens.
+ */
+ pr_debug(DEVNAME ": wait for disarm\n");
+ err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed);
+ pr_debug(DEVNAME ": disarm complete, stat %d\n", err);
+
+ if (err)
+ return err;
+
sbp.tb_enable = 0;
- /* XXXKW there is a window here where the intr handler
- may run, see the disable, and do the wake_up before
- this sleep happens. */
- if (sbp.tb_armed) {
- DBG(printk(DEVNAME ": wait for disarm\n"));
- prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
- schedule();
- finish_wait(&sbp.tb_sync, &wait);
- DBG(printk(DEVNAME ": disarm complete\n"));
- }
free_irq(K_INT_TRACE_FREEZE, &sbp);
free_irq(K_INT_PERF_CNT, &sbp);
}
- DBG(printk(DEVNAME ": done stopping\n"));
+ pr_debug(DEVNAME ": done stopping\n");
return 0;
}
int minor;
minor = iminor(inode);
- if (minor != 0) {
+ if (minor != 0)
return -ENODEV;
- }
- if (sbp.open) {
+
+ if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
return -EBUSY;
- }
memset(&sbp, 0, sizeof(struct sbprof_tb));
+
sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
- if (!sbp.sbprof_tbbuf) {
+ if (!sbp.sbprof_tbbuf)
return -ENOMEM;
- }
+
memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
init_waitqueue_head(&sbp.tb_sync);
init_waitqueue_head(&sbp.tb_read);
- sbp.open = 1;
+ mutex_init(&sbp.lock);
+
+ sbp.open = SB_OPEN;
return 0;
}
static int sbprof_tb_release(struct inode *inode, struct file *filp)
{
- int minor;
+ int minor = iminor(inode);
- minor = iminor(inode);
- if (minor != 0 || !sbp.open) {
+ if (minor != 0 || !sbp.open)
return -ENODEV;
- }
- if (sbp.tb_armed || sbp.tb_enable) {
+ mutex_lock(&sbp.lock);
+
+ if (sbp.tb_armed || sbp.tb_enable)
sbprof_zbprof_stop();
- }
vfree(sbp.sbprof_tbbuf);
sbp.open = 0;
+ mutex_unlock(&sbp.lock);
+
return 0;
}
size_t size, loff_t *offp)
{
int cur_sample, sample_off, cur_count, sample_left;
- char *src;
- int count = 0;
- char *dest = buf;
long cur_off = *offp;
+ char *dest = buf;
+ int count = 0;
+ char *src;
+
+ if (!access_ok(VERIFY_WRITE, buf, size))
+ return -EFAULT;
+
+ mutex_lock(&sbp.lock);
count = 0;
cur_sample = cur_off / TB_SAMPLE_SIZE;
sample_off = cur_off % TB_SAMPLE_SIZE;
sample_left = TB_SAMPLE_SIZE - sample_off;
+
while (size && (cur_sample < sbp.next_tb_sample)) {
+ int err;
+
cur_count = size < sample_left ? size : sample_left;
src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
- copy_to_user(dest, src, cur_count);
- DBG(printk(DEVNAME ": read from sample %d, %d bytes\n",
- cur_sample, cur_count));
+ err = __copy_to_user(dest, src, cur_count);
+ if (err) {
+ *offp = cur_off + cur_count - err;
+ mutex_unlock(&sbp.lock);
+ return err;
+ }
+
+ pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
+ cur_sample, cur_count);
size -= cur_count;
sample_left -= cur_count;
if (!sample_left) {
dest += cur_count;
count += cur_count;
}
+
*offp = cur_off;
+ mutex_unlock(&sbp.lock);
return count;
}
-static long sbprof_tb_ioctl(struct file *filp,
- unsigned int command,
- unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp, unsigned int command,
+ unsigned long arg)
{
int error = 0;
- lock_kernel();
switch (command) {
case SBPROF_ZBSTART:
+ mutex_lock(&sbp.lock);
error = sbprof_zbprof_start(filp);
+ mutex_unlock(&sbp.lock);
break;
+
case SBPROF_ZBSTOP:
+ mutex_lock(&sbp.lock);
error = sbprof_zbprof_stop();
+ mutex_unlock(&sbp.lock);
break;
+
case SBPROF_ZBWAITFULL:
- DEFINE_WAIT(wait);
- prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
- schedule();
- finish_wait(&sbp.tb_read, &wait);
- /* XXXKW check if interrupted? */
- return put_user(TB_FULL, (int *) arg);
+ error = wait_event_interruptible(sbp.tb_read, TB_FULL);
+ if (error)
+ break;
+
+ error = put_user(TB_FULL, (int *) arg);
+ break;
+
default:
error = -EINVAL;
break;
}
- unlock_kernel();
return error;
}
.mmap = NULL,
};
+static struct class *tb_class;
+static struct device *tb_dev;
+
static int __init sbprof_tb_init(void)
{
+ struct device *dev;
+ struct class *tbc;
+ int err;
+
if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
SBPROF_TB_MAJOR);
return -EIO;
}
+
+ tbc = class_create(THIS_MODULE, "sb_tracebuffer");
+ if (IS_ERR(tbc)) {
+ err = PTR_ERR(tbc);
+ goto out_chrdev;
+ }
+
+ tb_class = tbc;
+
+ dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+ if (IS_ERR(dev)) {
+ err = PTR_ERR(dev);
+ goto out_class;
+ }
+ tb_dev = dev;
+
sbp.open = 0;
tb_period = zbbus_mhz * 10000LL;
- printk(KERN_INFO DEVNAME ": initialized - tb_period = %lld\n", tb_period);
+ pr_info(DEVNAME ": initialized - tb_period = %lld\n", tb_period);
+
return 0;
+
+out_class:
+ class_destroy(tb_class);
+out_chrdev:
+ unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+
+ return err;
}
static void __exit sbprof_tb_cleanup(void)
{
+ device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+ class_destroy(tb_class);
}
module_init(sbprof_tb_init);
module_exit(sbprof_tb_cleanup);
+
+MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR);
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/string.h>
unsigned int soc_type;
unsigned int periph_rev;
unsigned int zbbus_mhz;
+EXPORT_SYMBOL(zbbus_mhz);
static char *soc_str;
static char *pass_str;
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "ppc970",
},
+ { /* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */
+ .pvr_mask = 0xffffffff,
+ .pvr_value = 0x00440100,
+ .cpu_name = "PPC970MP",
+ .cpu_features = CPU_FTRS_PPC970,
+ .cpu_user_features = COMMON_USER_POWER4 |
+ PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .num_pmcs = 8,
+ .cpu_setup = __setup_cpu_ppc970,
+ .cpu_restore = __restore_cpu_ppc970,
+ .oprofile_cpu_type = "ppc64/970MP",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .platform = "ppc970",
+ },
{ /* PPC970MP */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00440000,
static int of_irq_map_oldworld(struct device_node *device, int index,
struct of_irq *out_irq)
{
- const u32 *ints;
+ const u32 *ints = NULL;
int intlen;
/*
struct device_node *np = NULL;
int port0_is_dr = 0;
- if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
+ if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr")) != NULL)
port0_is_dr = 1;
- if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
+ if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph")) != NULL){
if (port0_is_dr) {
printk(KERN_WARNING
"There is only one USB port on PB board! \n");
return -1;
/*
- * if MDS board is plug into PIB board,
- * force to use the PHY on MDS board
+ * if Processor Board is plugged into PIB board,
+ * force to use the PHY on Processor Board
*/
bcsr5 = in_8(bcsr_regs + 5);
if (!(bcsr5 & BCSR5_INT_USB))
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
+ select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS
config PPC_INDIRECT_PCI_BE
#define iob() __asm__ __volatile__("eieio; sync":::"memory")
+static inline volatile void __iomem *celleb_epci_get_epci_base(
+ struct pci_controller *hose)
+{
+ /*
+ * Note:
+ * Celleb epci uses cfg_addr as a base address for
+ * epci control registers.
+ */
+
+ return hose->cfg_addr;
+}
+
+static inline volatile void __iomem *celleb_epci_get_epci_cfg(
+ struct pci_controller *hose)
+{
+ /*
+ * Note:
+ * Celleb epci uses cfg_data as a base address for
+ * configuration area for epci devices.
+ */
+
+ return hose->cfg_data;
+}
#if 0 /* test code for epci dummy read */
static void celleb_epci_dummy_read(struct pci_dev *dev)
{
- void __iomem *epci_base;
+ volatile void __iomem *epci_base;
struct device_node *node;
struct pci_controller *hose;
u32 val;
if (!hose)
return;
- epci_base = hose->cfg_addr;
+ epci_base = celleb_epci_get_epci_base(hose);
val = in_be32(epci_base + SCC_EPCI_WATRP);
iosync();
static inline void clear_and_disable_master_abort_interrupt(
struct pci_controller *hose)
{
- void __iomem *addr;
- addr = hose->cfg_addr + PCI_COMMAND;
- out_be32(addr, in_be32(addr) | (PCI_STATUS_REC_MASTER_ABORT << 16));
+ volatile void __iomem *epci_base, *reg;
+ epci_base = celleb_epci_get_epci_base(hose);
+ reg = epci_base + PCI_COMMAND;
+ out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16));
}
static int celleb_epci_check_abort(struct pci_controller *hose,
- void __iomem *addr)
+ volatile void __iomem *addr)
{
- void __iomem *reg, *epci_base;
+ volatile void __iomem *reg, *epci_base;
u32 val;
iob();
- epci_base = hose->cfg_addr;
+ epci_base = celleb_epci_get_epci_base(hose);
reg = epci_base + PCI_COMMAND;
val = in_be32(reg);
return PCIBIOS_SUCCESSFUL;
}
-static void __iomem *celleb_epci_make_config_addr(struct pci_controller *hose,
+static volatile void __iomem *celleb_epci_make_config_addr(
+ struct pci_controller *hose,
unsigned int devfn, int where)
{
- void __iomem *addr;
+ volatile void __iomem *addr;
struct pci_bus *bus = hose->bus;
if (bus->self)
- addr = hose->cfg_data +
+ addr = celleb_epci_get_epci_cfg(hose) +
(((bus->number & 0xff) << 16)
| ((devfn & 0xff) << 8)
| (where & 0xff)
| 0x01000000);
else
- addr = hose->cfg_data +
+ addr = celleb_epci_get_epci_cfg(hose) +
(((devfn & 0xff) << 8) | (where & 0xff));
pr_debug("EPCI: config_addr = 0x%p\n", addr);
static int celleb_epci_read_config(struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 * val)
{
- void __iomem *addr;
+ volatile void __iomem *epci_base, *addr;
struct device_node *node;
struct pci_controller *hose;
node = (struct device_node *)bus->sysdata;
hose = pci_find_hose_for_OF_device(node);
- if (!hose->cfg_data)
+ if (!celleb_epci_get_epci_cfg(hose))
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number == hose->first_busno && devfn == 0) {
/* EPCI controller self */
- addr = hose->cfg_addr + where;
+ epci_base = celleb_epci_get_epci_base(hose);
+ addr = epci_base + where;
switch (size) {
case 1:
}
pr_debug("EPCI: "
- "addr=0x%lx, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
+ "addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
addr, devfn, where, size, *val);
return celleb_epci_check_abort(hose, NULL);
static int celleb_epci_write_config(struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 val)
{
- void __iomem *addr;
+ volatile void __iomem *epci_base, *addr;
struct device_node *node;
struct pci_controller *hose;
node = (struct device_node *)bus->sysdata;
hose = pci_find_hose_for_OF_device(node);
- if (!hose->cfg_data)
+
+ if (!celleb_epci_get_epci_cfg(hose))
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number == hose->first_busno && devfn == 0) {
/* EPCI controller self */
- addr = hose->cfg_addr + where;
+ epci_base = celleb_epci_get_epci_base(hose);
+ addr = epci_base + where;
switch (size) {
case 1:
static int __devinit celleb_epci_init(struct pci_controller *hose)
{
u32 val;
- void __iomem *reg, *epci_base;
+ volatile void __iomem *reg, *epci_base;
int hwres = 0;
- epci_base = hose->cfg_addr;
+ epci_base = celleb_epci_get_epci_base(hose);
/* PCI core reset(Internal bus and PCI clock) */
reg = epci_base + SCC_EPCI_CKCTRL;
pr_debug("PCI: celleb_setup_epci()\n");
+ /*
+ * Note:
+ * Celleb epci uses cfg_addr and cfg_data member of
+ * pci_controller structure in irregular way.
+ *
+ * cfg_addr is used to map for control registers of
+ * celleb epci.
+ *
+ * cfg_data is used for configuration area of devices
+ * on Celleb epci buses.
+ */
+
if (of_address_to_resource(node, 0, &r))
goto error;
hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
+ select DEFAULT_UIMAGE
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
unsigned long flags;
struct pci_dev *pdev = NULL;
u8 pbus, pid;
+ int rc;
if (uninorth_rev < 0x24)
return -ENODEV;
pdev = pci_find_slot(pbus, pid);
if (pdev == NULL)
return 0;
- pci_enable_device(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
pci_set_master(pdev);
}
return 0;
* -- BenH
*/
for_each_pci_dev(dev) {
- if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE)
- pci_enable_device(dev);
+ if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE)
+ continue;
+ if (pci_enable_device(dev))
+ printk(KERN_WARNING
+ "pci: Failed to enable %s\n", pci_name(dev));
}
#endif /* CONFIG_BLK_DEV_IDE */
" ss stop execution on all spus\n\
sr restore execution on stopped spus\n\
sf # dump spu fields for spu # (in hex)\n\
- sd # dump spu local store for spu # (in hex)\
+ sd # dump spu local store for spu # (in hex)\n\
sdi # disassemble spu local store for spu # (in hex)\n"
#endif
" S print special registers\n\
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
+ depends on PM
config ACPI
bool "ACPI Support"
If you are not sure, say N here.
+config ACPI_IBM_BAY
+ bool "Legacy Removable Bay Support"
+ depends on ACPI_IBM
+ default y
+ ---help---
+ Allows the ibm_acpi driver to handle removable bays. It will allow
+ disabling the device in the bay, and also generate notifications when
+ the bay lever is ejected or inserted.
+
+ If you are not sure, say Y here.
+
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
{
int year = dmi_get_year(DMI_BIOS_DATE);
/* Doesn't exist? Likely an old system */
- if (year == -1)
+ if (year == -1) {
+ printk(KERN_ERR PREFIX "no DMI BIOS year, "
+ "acpi=force is required to enable ACPI\n" );
return 1;
+ }
/* 0? Likely a buggy new BIOS */
- if (year == 0)
+ if (year == 0) {
+ printk(KERN_ERR PREFIX "DMI BIOS year==0, "
+ "assuming ACPI-capable machine\n" );
return 0;
+ }
if (year < CONFIG_ACPI_BLACKLIST_YEAR) {
printk(KERN_ERR PREFIX "BIOS age (%d) fails cutoff (%d), "
"acpi=force is required to enable ACPI\n",
unsigned long global_lock;
struct mutex lock;
atomic_t query_pending;
+ atomic_t event_count;
atomic_t leaving_burst; /* 0 : No, 1 : Yes, 2: abort */
wait_queue_head_t wait;
} *ec_ecdt;
outb(data, ec->data_addr);
}
-static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
+static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event,
+ unsigned old_count)
{
u8 status = acpi_ec_read_status(ec);
-
+ if (old_count == atomic_read(&ec->event_count))
+ return 0;
if (event == ACPI_EC_EVENT_OBF_1) {
if (status & ACPI_EC_FLAG_OBF)
return 1;
return 0;
}
-static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event)
+static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, unsigned count)
{
if (acpi_ec_mode == EC_POLL) {
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
while (time_before(jiffies, delay)) {
- if (acpi_ec_check_status(ec, event))
+ if (acpi_ec_check_status(ec, event, 0))
return 0;
}
} else {
if (wait_event_timeout(ec->wait,
- acpi_ec_check_status(ec, event),
+ acpi_ec_check_status(ec, event, count),
msecs_to_jiffies(ACPI_EC_DELAY)) ||
- acpi_ec_check_status(ec, event)) {
+ acpi_ec_check_status(ec, event, 0)) {
return 0;
} else {
printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
u8 * rdata, unsigned rdata_len)
{
int result = 0;
-
+ unsigned count = atomic_read(&ec->event_count);
acpi_ec_write_cmd(ec, command);
for (; wdata_len > 0; --wdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count);
if (result) {
printk(KERN_ERR PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
+ count = atomic_read(&ec->event_count);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count);
if (result) {
printk(KERN_ERR PREFIX
"finish-write timeout, command = %d\n", command);
}
for (; rdata_len > 0; --rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count);
if (result) {
printk(KERN_ERR PREFIX "read timeout, command = %d\n",
command);
goto end;
}
-
+ count = atomic_read(&ec->event_count);
*(rdata++) = acpi_ec_read_data(ec);
}
end:
/* Make sure GPE is enabled before doing transaction */
acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
+ status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
if (status) {
printk(KERN_DEBUG PREFIX
"input buffer is not empty, aborting transaction\n");
EXPORT_SYMBOL(ec_write);
int ec_transaction(u8 command,
- const u8 * wdata, unsigned wdata_len,
- u8 * rdata, unsigned rdata_len)
+ const u8 * wdata, unsigned wdata_len,
+ u8 * rdata, unsigned rdata_len)
{
struct acpi_ec *ec;
acpi_status status = AE_OK;
u8 value;
struct acpi_ec *ec = (struct acpi_ec *)data;
-
+ atomic_inc(&ec->event_count);
if (acpi_ec_mode == EC_INTR) {
wake_up(&ec->wait);
}
ec->uid = -1;
mutex_init(&ec->lock);
atomic_set(&ec->query_pending, 0);
+ atomic_set(&ec->event_count, 1);
if (acpi_ec_mode == EC_INTR) {
atomic_set(&ec->leaving_burst, 1);
init_waitqueue_head(&ec->wait);
acpi_status status;
mutex_init(&ec_ecdt->lock);
+ atomic_set(&ec_ecdt->event_count, 1);
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
return -ENOMEM;
mutex_init(&ec_ecdt->lock);
+ atomic_set(&ec_ecdt->event_count, 1);
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
acpi_ec_mode = EC_POLL;
}
acpi_ec_driver.ops.add = acpi_ec_add;
- printk(KERN_NOTICE PREFIX "%s mode.\n",
- intr ? "interrupt" : "polling");
+ printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
return 1;
}
* the global lock appear as a standard mutex on the OS side.
*
*****************************************************************************/
+static acpi_thread_id acpi_ev_global_lock_thread_id;
+static int acpi_ev_global_lock_acquired;
acpi_status acpi_ev_acquire_global_lock(u16 timeout)
{
* Only one thread can acquire the GL at a time, the global_lock_mutex
* enforces this. This interface releases the interpreter if we must wait.
*/
- status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, timeout);
+ status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, 0);
+ if (status == AE_TIME) {
+ if (acpi_ev_global_lock_thread_id == acpi_os_get_thread_id()) {
+ acpi_ev_global_lock_acquired++;
+ return AE_OK;
+ }
+ }
+
+ if (ACPI_FAILURE(status)) {
+ status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, timeout);
+ }
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+ acpi_ev_global_lock_thread_id = acpi_os_get_thread_id();
+ acpi_ev_global_lock_acquired++;
+
/*
* Make sure that a global lock actually exists. If not, just treat
* the lock as a standard mutex.
return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
+ acpi_ev_global_lock_acquired--;
+ if (acpi_ev_global_lock_acquired > 0) {
+ return AE_OK;
+ }
+
if (acpi_gbl_global_lock_present) {
/* Allow any thread to release the lock */
acpi_gbl_global_lock_acquired = FALSE;
/* Release the local GL mutex */
-
+ acpi_ev_global_lock_thread_id = 0;
+ acpi_ev_global_lock_acquired = 0;
acpi_os_release_mutex(acpi_gbl_global_lock_mutex);
return_ACPI_STATUS(status);
}
#include <linux/proc_fs.h>
#include <linux/backlight.h>
+#include <linux/fb.h>
#include <asm/uaccess.h>
#include <linux/dmi.h>
"\\_SB.PCI.ISA.SLCE", /* 570 */
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
"\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
"_EJ0", /* 770x */
); /* all others */
+#endif /* CONFIG_ACPI_IBM_BAY */
/* don't list other alternatives as we install a notify handler on the 570 */
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
return 0;
}
+#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
static int _sta(acpi_handle handle)
{
int status;
return status;
}
+#endif
#ifdef CONFIG_ACPI_IBM_DOCK
#define dock_docked() (_sta(dock_handle) & 1)
}
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
static int bay_status_supported;
static int bay_status2_supported;
static int bay_eject_supported;
{
acpi_bus_generate_event(ibm->device, event, 0);
}
+#endif /* CONFIG_ACPI_IBM_BAY */
static int cmos_read(char *p)
{
static int brightness_update_status(struct backlight_device *bd)
{
- return brightness_set(bd->props.brightness);
+ return brightness_set(
+ (bd->props.fb_blank == FB_BLANK_UNBLANK &&
+ bd->props.power == FB_BLANK_UNBLANK) ?
+ bd->props.brightness : 0);
}
static struct backlight_ops ibm_backlight_data = {
static int brightness_init(void)
{
+ int b;
+
+ b = brightness_get(NULL);
+ if (b < 0)
+ return b;
+
ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
&ibm_backlight_data);
if (IS_ERR(ibm_backlight_device)) {
return PTR_ERR(ibm_backlight_device);
}
- ibm_backlight_device->props.max_brightness = 7;
+ ibm_backlight_device->props.max_brightness = 7;
+ ibm_backlight_device->props.brightness = b;
+ backlight_update_status(ibm_backlight_device);
return 0;
}
.type = ACPI_SYSTEM_NOTIFY,
},
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
{
.name = "bay",
.init = bay_init,
.handle = &bay_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
+#endif /* CONFIG_ACPI_IBM_BAY */
{
.name = "cmos",
.read = cmos_read,
#ifdef CONFIG_ACPI_IBM_DOCK
IBM_PARAM(dock);
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_PARAM(bay);
+#endif /* CONFIG_ACPI_IBM_BAY */
IBM_PARAM(cmos);
IBM_PARAM(led);
IBM_PARAM(beep);
IBM_HANDLE_INIT(dock);
#endif
IBM_HANDLE_INIT(pci);
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE_INIT(bay);
if (bay_handle)
IBM_HANDLE_INIT(bay_ej);
IBM_HANDLE_INIT(bay2);
if (bay2_handle)
IBM_HANDLE_INIT(bay2_ej);
+#endif /* CONFIG_ACPI_IBM_BAY */
IBM_HANDLE_INIT(beep);
IBM_HANDLE_INIT(ecrd);
IBM_HANDLE_INIT(ecwr);
cl = &device->power.states[device->power.state].resources;
tl = &device->power.states[state].resources;
- device->power.state = ACPI_STATE_UNKNOWN;
-
if (!cl->count && !tl->count) {
result = -ENODEV;
goto end;
goto end;
}
- /* We shouldn't change the state till all above operations succeed */
- device->power.state = state;
- end:
- if (result)
+ end:
+ if (result) {
+ device->power.state = ACPI_STATE_UNKNOWN;
printk(KERN_WARNING PREFIX "Transitioning device [%s] to D%d\n",
device->pnp.bus_id, state);
+ } else {
+ /* We shouldn't change the state till all above operations succeed */
+ device->power.state = state;
+ }
return result;
}
return result;
mutex_lock(&resource->resource_lock);
- if ((resource->state == ACPI_POWER_RESOURCE_STATE_ON) &&
- list_empty(&resource->reference)) {
- mutex_unlock(&resource->resource_lock);
- result = acpi_power_off_device(device->handle, NULL);
- return result;
- }
-
if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) &&
!list_empty(&resource->reference)) {
ref = container_of(resource->reference.next, struct acpi_power_reference, node);
user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
for (index = 0; index < number_of_elements; index++) {
+ int source_name_index = 2;
+ int source_index_index = 3;
+
/*
* Point user_prt past this current structure
*
return_ACPI_STATUS(AE_BAD_DATA);
}
+ /*
+ * If BIOS erroneously reversed the _PRT source_name and source_index,
+ * then reverse them back.
+ */
+ if (ACPI_GET_OBJECT_TYPE (sub_object_list[3]) != ACPI_TYPE_INTEGER) {
+ if (acpi_gbl_enable_interpreter_slack) {
+ source_name_index = 3;
+ source_index_index = 2;
+ printk(KERN_WARNING "ACPI: Handling Garbled _PRT entry\n");
+ } else {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].source_index) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(sub_object_list[3])));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+ }
+
/*
* 3) Third subobject: Dereference the PRT.source_name
* The name may be unresolved (slack mode), so allow a null object
*/
- obj_desc = sub_object_list[2];
+ obj_desc = sub_object_list[source_name_index];
if (obj_desc) {
switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
case ACPI_TYPE_LOCAL_REFERENCE:
/* 4) Fourth subobject: Dereference the PRT.source_index */
- obj_desc = sub_object_list[3];
+ obj_desc = sub_object_list[source_index_index];
if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
user_prt->source_index = (u32) obj_desc->integer.value;
} else {
struct acpi_video_device_attrib {
u32 display_index:4; /* A zero-based instance of the Display */
- u32 display_port_attachment:4; /*This field differenates displays type */
+ u32 display_port_attachment:4; /*This field differentiates the display type */
u32 display_type:4; /*Describe the specific type in use */
- u32 vendor_specific:4; /*Chipset Vendor Specifi */
+ u32 vendor_specific:4; /*Chipset Vendor Specific */
u32 bios_can_detect:1; /*BIOS can detect the device */
u32 depend_on_vga:1; /*Non-VGA output device whose power is related to
the VGA device. */
* 0. The system BIOS should NOT automatically switch(toggle)
* the active display output.
* 1. The system BIOS should automatically switch (toggle) the
- * active display output. No swich event.
+ * active display output. No switch event.
* 2. The _DGS value should be locked.
* 3. The system BIOS should not automatically switch (toggle) the
* active display output, but instead generate the display switch
* event notify code.
* lcd_flag :
* 0. The system BIOS should automatically control the brightness level
- * of the LCD, when the power changes from AC to DC
+ * of the LCD when the power changes from AC to DC
* 1. The system BIOS should NOT automatically control the brightness
- * level of the LCD, when the power changes from AC to DC.
+ * level of the LCD when the power changes from AC to DC.
* Return Value:
* -1 wrong arg.
*/
* Return Value:
* None
*
- * Find out all required AML method defined under the output
+ * Find out all required AML methods defined under the output
* device.
*/
* Return Value:
* None
*
- * Find out all required AML method defined under the video bus device.
+ * Find out all required AML methods defined under the video bus device.
*/
static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
* to check well known required nodes.
*/
- /* Does this device able to support video switching ? */
+ /* Does this device support video switching? */
if (video->cap._DOS) {
video->flags.multihead = 1;
status = 0;
}
- /* Does this device able to retrieve a retrieve a video ROM ? */
+ /* Does this device support retrieving a video ROM? */
if (video->cap._ROM) {
video->flags.rom = 1;
status = 0;
}
- /* Does this device able to configure which video device to POST ? */
+ /* Does this device support configuring which video device to POST? */
if (video->cap._GPD && video->cap._SPD && video->cap._VPO) {
video->flags.post = 1;
status = 0;
if (level > 100)
return -EFAULT;
- /* validate though the list of available levels */
+ /* validate through the list of available levels */
for (i = 0; i < dev->brightness->count; i++)
if (level == dev->brightness->levels[i]) {
if (ACPI_SUCCESS
printk(KERN_WARNING PREFIX
"The motherboard VGA device is not listed as a possible POST device.\n");
printk(KERN_WARNING PREFIX
- "This indicate a BIOS bug. Please contact the manufacturer.\n");
+ "This indicates a BIOS bug. Please contact the manufacturer.\n");
}
printk("%lx\n", options);
- seq_printf(seq, "can POST: <intgrated video>");
+ seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
if (options & 4)
seq_printf(seq, "<not supported>\n");
goto end;
}
- seq_printf(seq, "device posted is <%s>\n", device_decode[id & 3]);
+ seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]);
end:
return 0;
if (opt > 3)
return -EFAULT;
- /* just in case an OEM 'forget' the motherboard... */
+ /* just in case an OEM 'forgot' the motherboard... */
options |= 1;
if (options & (1ul << opt)) {
/*
* Arg:
* video : video bus device
- * event : Nontify Event
+ * event : notify event
*
* Return:
* < 0 : error
*
* 1. Find out the current active output device.
- * 2. Identify the next output device to switch
+ * 2. Identify the next output device to switch to.
* 3. call _DSS to do actual switch.
*/
device = video->device;
switch (event) {
- case ACPI_VIDEO_NOTIFY_SWITCH: /* User request that a switch occur,
+ case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch,
* most likely via hotkey. */
acpi_bus_generate_event(device, event, 0);
break;
- case ACPI_VIDEO_NOTIFY_PROBE: /* User plug or remove a video
+ case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video
* connector. */
acpi_video_device_enumerate(video);
acpi_video_device_rebind(video);
if (noacpi)
return 0;
+ /*
+ * TBD - implement PATA support. For now,
+ * we should not run GTF on PATA devices since some
+ * PATA require execution of GTM/STM before GTF.
+ */
+ if (!(ap->cbl == ATA_CBL_SATA))
+ return 0;
for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
if (!ata_dev_enabled(&ap->device[ix]))
if (dev->kobj.parent != &dev->class->subsys.kset.kobj)
sysfs_create_link(&dev->class->subsys.kset.kobj,
&dev->kobj, dev->bus_id);
-#ifdef CONFIG_SYSFS_DEPRECATED
if (parent) {
sysfs_create_link(&dev->kobj, &dev->parent->kobj,
"device");
+#ifdef CONFIG_SYSFS_DEPRECATED
class_name = make_class_name(dev->class->name,
&dev->kobj);
if (class_name)
sysfs_create_link(&dev->parent->kobj,
&dev->kobj, class_name);
- }
#endif
+ }
}
if ((error = device_add_attrs(dev)))
if (dev->kobj.parent != &dev->class->subsys.kset.kobj)
sysfs_remove_link(&dev->class->subsys.kset.kobj,
dev->bus_id);
-#ifdef CONFIG_SYSFS_DEPRECATED
if (parent) {
+#ifdef CONFIG_SYSFS_DEPRECATED
char *class_name = make_class_name(dev->class->name,
&dev->kobj);
if (class_name)
sysfs_remove_link(&dev->parent->kobj,
class_name);
kfree(class_name);
+#endif
sysfs_remove_link(&dev->kobj, "device");
}
-#endif
down(&dev->class->sem);
/* notify any interfaces that the device is now gone */
if (dev->kobj.parent != &dev->class->subsys.kset.kobj)
sysfs_remove_link(&dev->class->subsys.kset.kobj,
dev->bus_id);
-#ifdef CONFIG_SYSFS_DEPRECATED
if (parent) {
+#ifdef CONFIG_SYSFS_DEPRECATED
char *class_name = make_class_name(dev->class->name,
&dev->kobj);
if (class_name)
sysfs_remove_link(&dev->parent->kobj,
class_name);
kfree(class_name);
+#endif
sysfs_remove_link(&dev->kobj, "device");
}
-#endif
down(&dev->class->sem);
/* notify any interfaces that the device is now gone */
return error;
}
-
+EXPORT_SYMBOL_GPL(device_rename);
static int device_move_class_links(struct device *dev,
struct device *old_parent,
struct device *new_parent)
{
+ int error = 0;
#ifdef CONFIG_SYSFS_DEPRECATED
- int error;
char *class_name;
class_name = make_class_name(dev->class->name, &dev->kobj);
kfree(class_name);
return error;
#else
- return 0;
+ if (old_parent)
+ sysfs_remove_link(&dev->kobj, "device");
+ if (new_parent)
+ error = sysfs_create_link(&dev->kobj, &new_parent->kobj,
+ "device");
+ return error;
#endif
}
enum led_brightness value); \
static void object##_led_update(struct work_struct *ignored); \
static int object##_led_wk; \
- DECLARE_WORK(object##_led_work, object##_led_update); \
+ static DECLARE_WORK(object##_led_work, object##_led_update); \
static struct led_classdev object##_led = { \
.name = "asus:" ledname, \
.brightness_set = object##_led_set, \
static int sony_acpi_add(struct acpi_device *device)
{
acpi_status status;
- int result;
+ int result = 0;
acpi_handle handle;
sony_acpi_acpi_device = device;
* when a device is enabled using managed PCI device enable interface.
*/
struct pci_devres {
- unsigned int disable:1;
+ unsigned int enabled:1;
+ unsigned int pinned:1;
unsigned int orig_intx:1;
unsigned int restore_intx:1;
u32 region_mask;
if (this->restore_intx)
pci_intx(dev, this->orig_intx);
- if (this->disable)
+ if (this->enabled && !this->pinned)
pci_disable_device(dev);
}
dr = get_pci_dr(pdev);
if (unlikely(!dr))
return -ENOMEM;
- WARN_ON(!!dr->disable);
+ WARN_ON(!!dr->enabled);
rc = pci_enable_device(pdev);
if (!rc) {
pdev->is_managed = 1;
- dr->disable = 1;
+ dr->enabled = 1;
}
return rc;
}
struct pci_devres *dr;
dr = find_pci_dr(pdev);
- WARN_ON(!dr || !dr->disable);
+ WARN_ON(!dr || !dr->enabled);
if (dr)
- dr->disable = 0;
+ dr->pinned = 1;
}
/**
dr = find_pci_dr(dev);
if (dr)
- dr->disable = 0;
+ dr->enabled = 0;
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
return;
.resume = aer_error_resume,
};
-static struct pcie_port_service_driver aerdrv = {
+static struct pcie_port_service_driver aerdriver = {
.name = "aer",
.id_table = &aer_id[0],
**/
static int __init aer_service_init(void)
{
- return pcie_port_service_register(&aerdrv);
+ return pcie_port_service_register(&aerdriver);
}
/**
**/
static void __exit aer_service_exit(void)
{
- pcie_port_service_unregister(&aerdrv);
+ pcie_port_service_unregister(&aerdriver);
}
module_init(aer_service_init);
.resume = pcie_portdrv_err_resume,
};
-static struct pci_driver pcie_portdrv = {
+static struct pci_driver pcie_portdriver = {
.name = (char *)device_name,
.id_table = &port_pci_ids[0],
printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
goto out;
}
- retval = pci_register_driver(&pcie_portdrv);
+ retval = pci_register_driver(&pcie_portdriver);
if (retval)
pcie_port_bus_unregister();
out:
static void __exit pcie_portdrv_exit(void)
{
- pci_unregister_driver(&pcie_portdrv);
+ pci_unregister_driver(&pcie_portdriver);
pcie_port_bus_unregister();
}
DECLARE_RWSEM(pci_bus_sem);
-static struct pci_bus * __devinit
+static struct pci_bus *
pci_do_find_bus(struct pci_bus* bus, unsigned char busnr)
{
struct pci_bus* child;
return;
res->irq_resource[i].flags = IORESOURCE_IRQ; // Also clears _UNSET flag
+ res->irq_resource[i].flags |= irq_flags(triggering, polarity);
irq = acpi_register_gsi(gsi, triggering, polarity);
if (irq < 0) {
res->irq_resource[i].flags |= IORESOURCE_DISABLED;
pcibios_penalize_isa_irq(irq, 1);
}
+static int dma_flags(int type, int bus_master, int transfer)
+{
+ int flags = 0;
+
+ if (bus_master)
+ flags |= IORESOURCE_DMA_MASTER;
+ switch (type) {
+ case ACPI_COMPATIBILITY:
+ flags |= IORESOURCE_DMA_COMPATIBLE;
+ break;
+ case ACPI_TYPE_A:
+ flags |= IORESOURCE_DMA_TYPEA;
+ break;
+ case ACPI_TYPE_B:
+ flags |= IORESOURCE_DMA_TYPEB;
+ break;
+ case ACPI_TYPE_F:
+ flags |= IORESOURCE_DMA_TYPEF;
+ break;
+ default:
+ /* Set a default value ? */
+ flags |= IORESOURCE_DMA_COMPATIBLE;
+ pnp_err("Invalid DMA type");
+ }
+ switch (transfer) {
+ case ACPI_TRANSFER_8:
+ flags |= IORESOURCE_DMA_8BIT;
+ break;
+ case ACPI_TRANSFER_8_16:
+ flags |= IORESOURCE_DMA_8AND16BIT;
+ break;
+ case ACPI_TRANSFER_16:
+ flags |= IORESOURCE_DMA_16BIT;
+ break;
+ default:
+ /* Set a default value ? */
+ flags |= IORESOURCE_DMA_8AND16BIT;
+ pnp_err("Invalid DMA transfer type");
+ }
+
+ return flags;
+}
+
static void
-pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res, u32 dma)
+pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res, u32 dma,
+ int type, int bus_master, int transfer)
{
int i = 0;
while (i < PNP_MAX_DMA &&
i++;
if (i < PNP_MAX_DMA) {
res->dma_resource[i].flags = IORESOURCE_DMA; // Also clears _UNSET flag
+ res->dma_resource[i].flags |= dma_flags(type, bus_master, transfer);
if (dma == -1) {
res->dma_resource[i].flags |= IORESOURCE_DISABLED;
return;
static void
pnpacpi_parse_allocated_ioresource(struct pnp_resource_table *res,
- u64 io, u64 len)
+ u64 io, u64 len, int io_decode)
{
int i = 0;
while (!(res->port_resource[i].flags & IORESOURCE_UNSET) &&
i++;
if (i < PNP_MAX_PORT) {
res->port_resource[i].flags = IORESOURCE_IO; // Also clears _UNSET flag
+ if (io_decode == ACPI_DECODE_16)
+ res->port_resource[i].flags |= PNP_PORT_FLAG_16BITADDR;
if (len <= 0 || (io + len -1) >= 0x10003) {
res->port_resource[i].flags |= IORESOURCE_DISABLED;
return;
static void
pnpacpi_parse_allocated_memresource(struct pnp_resource_table *res,
- u64 mem, u64 len)
+ u64 mem, u64 len, int write_protect)
{
int i = 0;
while (!(res->mem_resource[i].flags & IORESOURCE_UNSET) &&
res->mem_resource[i].flags |= IORESOURCE_DISABLED;
return;
}
+ if(write_protect == ACPI_READ_WRITE_MEMORY)
+ res->mem_resource[i].flags |= IORESOURCE_MEM_WRITEABLE;
+
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
}
if (p->resource_type == ACPI_MEMORY_RANGE)
pnpacpi_parse_allocated_memresource(res_table,
- p->minimum, p->address_length);
+ p->minimum, p->address_length, p->info.mem.write_protect);
else if (p->resource_type == ACPI_IO_RANGE)
pnpacpi_parse_allocated_ioresource(res_table,
- p->minimum, p->address_length);
+ p->minimum, p->address_length,
+ p->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16);
}
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
case ACPI_RESOURCE_TYPE_DMA:
if (res->data.dma.channel_count > 0)
pnpacpi_parse_allocated_dmaresource(res_table,
- res->data.dma.channels[0]);
+ res->data.dma.channels[0],
+ res->data.dma.type,
+ res->data.dma.bus_master,
+ res->data.dma.transfer);
break;
case ACPI_RESOURCE_TYPE_IO:
pnpacpi_parse_allocated_ioresource(res_table,
res->data.io.minimum,
- res->data.io.address_length);
+ res->data.io.address_length,
+ res->data.io.io_decode);
break;
case ACPI_RESOURCE_TYPE_START_DEPENDENT:
case ACPI_RESOURCE_TYPE_FIXED_IO:
pnpacpi_parse_allocated_ioresource(res_table,
res->data.fixed_io.address,
- res->data.fixed_io.address_length);
+ res->data.fixed_io.address_length,
+ ACPI_DECODE_10);
break;
case ACPI_RESOURCE_TYPE_VENDOR:
case ACPI_RESOURCE_TYPE_MEMORY24:
pnpacpi_parse_allocated_memresource(res_table,
res->data.memory24.minimum,
- res->data.memory24.address_length);
+ res->data.memory24.address_length,
+ res->data.memory24.write_protect);
break;
case ACPI_RESOURCE_TYPE_MEMORY32:
pnpacpi_parse_allocated_memresource(res_table,
res->data.memory32.minimum,
- res->data.memory32.address_length);
+ res->data.memory32.address_length,
+ res->data.memory32.write_protect);
break;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
pnpacpi_parse_allocated_memresource(res_table,
res->data.fixed_memory32.address,
- res->data.fixed_memory32.address_length);
+ res->data.fixed_memory32.address_length,
+ res->data.fixed_memory32.write_protect);
break;
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
for(i = 0; i < p->channel_count; i++)
dma->map |= 1 << p->channels[i];
- dma->flags = 0;
- if (p->bus_master)
- dma->flags |= IORESOURCE_DMA_MASTER;
- switch (p->type) {
- case ACPI_COMPATIBILITY:
- dma->flags |= IORESOURCE_DMA_COMPATIBLE;
- break;
- case ACPI_TYPE_A:
- dma->flags |= IORESOURCE_DMA_TYPEA;
- break;
- case ACPI_TYPE_B:
- dma->flags |= IORESOURCE_DMA_TYPEB;
- break;
- case ACPI_TYPE_F:
- dma->flags |= IORESOURCE_DMA_TYPEF;
- break;
- default:
- /* Set a default value ? */
- dma->flags |= IORESOURCE_DMA_COMPATIBLE;
- pnp_err("Invalid DMA type");
- }
- switch (p->transfer) {
- case ACPI_TRANSFER_8:
- dma->flags |= IORESOURCE_DMA_8BIT;
- break;
- case ACPI_TRANSFER_8_16:
- dma->flags |= IORESOURCE_DMA_8AND16BIT;
- break;
- case ACPI_TRANSFER_16:
- dma->flags |= IORESOURCE_DMA_16BIT;
- break;
- default:
- /* Set a default value ? */
- dma->flags |= IORESOURCE_DMA_8AND16BIT;
- pnp_err("Invalid DMA transfer type");
- }
+
+ dma->flags = dma_flags(p->type, p->bus_master, p->transfer);
pnp_register_dma_resource(option, dma);
return;
if (!ACM_READY(acm))
return;
- spin_lock(&acm->throttle_lock);
+ spin_lock_irqsave(&acm->throttle_lock, flags);
throttled = acm->throttle;
- spin_unlock(&acm->throttle_lock);
+ spin_unlock_irqrestore(&acm->throttle_lock, flags);
if (throttled)
return;
dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
tty_buffer_request_room(tty, buf->size);
- spin_lock(&acm->throttle_lock);
+ spin_lock_irqsave(&acm->throttle_lock, flags);
throttled = acm->throttle;
- spin_unlock(&acm->throttle_lock);
+ spin_unlock_irqrestore(&acm->throttle_lock, flags);
if (!throttled)
tty_insert_flip_string(tty, buf->base, buf->size);
tty_flip_buffer_push(tty);
struct async *as;
struct usb_ctrlrequest *dr = NULL;
unsigned int u, totlen, isofrmlen;
- int ret, interval = 0, ifnum = -1;
+ int ret, ifnum = -1;
if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP|USBDEVFS_URB_SHORT_NOT_OK|
URB_NO_FSBR|URB_ZERO_PACKET))
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_ISOC)
return -EINVAL;
- interval = 1 << min (15, ep->desc.bInterval - 1);
isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * uurb->number_of_packets;
if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
return -ENOMEM;
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT)
return -EINVAL;
- if (ps->dev->speed == USB_SPEED_HIGH)
- interval = 1 << min (15, ep->desc.bInterval - 1);
- else
- interval = ep->desc.bInterval;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
as->urb->setup_packet = (unsigned char*)dr;
as->urb->start_frame = uurb->start_frame;
as->urb->number_of_packets = uurb->number_of_packets;
- as->urb->interval = interval;
+ if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
+ ps->dev->speed == USB_SPEED_HIGH)
+ as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
+ else
+ as->urb->interval = ep->desc.bInterval;
as->urb->context = as;
as->urb->complete = async_completed;
for (totlen = u = 0; u < uurb->number_of_packets; u++) {
{
int err;
- /* Lock ourself into memory in order to keep a probe sequence
- * sleeping in a new thread from allowing us to be unloaded.
- */
- if (!try_module_get(THIS_MODULE))
- return -EINVAL;
-
/* Determine quirks */
usb_detect_quirks(udev);
usb_autoresume_device(udev->parent);
exit:
- module_put(THIS_MODULE);
return err;
fail:
if (portchange & USB_PORT_STAT_C_CONNECTION) {
status = hub_port_debounce(hub, port1);
- if (status < 0) {
+ if (status < 0 && printk_ratelimit()) {
dev_err (hub_dev,
"connect-debounce failed, port %d disabled\n",
port1);
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_INT) {
+ int interval;
+
+ if (usb_dev->speed == USB_SPEED_HIGH)
+ interval = 1 << min(15, ep->desc.bInterval - 1);
+ else
+ interval = ep->desc.bInterval;
pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
usb_fill_int_urb(urb, usb_dev, pipe, data, len,
- usb_api_blocking_completion, NULL,
- ep->desc.bInterval);
+ usb_api_blocking_completion, NULL, interval);
} else
usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
usb_api_blocking_completion, NULL);
#define at91udc_resume NULL
#endif
-static struct platform_driver at91_udc = {
+static struct platform_driver at91_udc_driver = {
.remove = __exit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
.suspend = at91udc_suspend,
static int __init udc_init_module(void)
{
- return platform_driver_probe(&at91_udc, at91udc_probe);
+ return platform_driver_probe(&at91_udc_driver, at91udc_probe);
}
module_init(udc_init_module);
static void __exit udc_exit_module(void)
{
- platform_driver_unregister(&at91_udc);
+ platform_driver_unregister(&at91_udc_driver);
}
module_exit(udc_exit_module);
/*-------------------------------------------------------------------------*/
-#undef USE_KMALLOC
-
-/* many common platforms have dma-coherent caches, which means that it's
- * safe to use kmalloc() memory for all i/o buffers without using any
- * cache flushing calls. (unless you're trying to share cache lines
- * between dma and non-dma activities, which is a slow idea in any case.)
- *
- * other platforms need more care, with 2.6 having a moderately general
- * solution except for the common "buffer is smaller than a page" case.
- */
-#if defined(CONFIG_X86)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
-#define USE_KMALLOC
-
-#endif
-
/* allocating buffers this way eliminates dma mapping overhead, which
* on some platforms will mean eliminating a per-io buffer copy. with
* some kinds of system caches, further tweaks may still be needed.
return NULL;
*dma = DMA_ADDR_INVALID;
-#if defined(USE_KMALLOC)
- retval = kmalloc(bytes, gfp_flags);
- if (retval)
- *dma = virt_to_phys(retval);
-#else
if (ep->dma) {
/* the main problem with this call is that it wastes memory
* on typical 1/N page allocations: it allocates 1-N pages.
bytes, dma, gfp_flags);
} else
retval = kmalloc(bytes, gfp_flags);
-#endif
return retval;
}
goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
{
/* free memory into the right allocator */
-#ifndef USE_KMALLOC
if (dma != DMA_ADDR_INVALID) {
struct goku_ep *ep;
return;
dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
} else
-#endif
kfree (buf);
}
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, vbus_irq, retval);
- free_irq(IRQ_USB, dev);
+ free_irq(irq, dev);
return -EBUSY;
}
}
if (status & ~0xffff) /* only if wPortChange is interesting */
#endif
dbg_port (ehci, "GetStatus", wIndex + 1, temp);
- // we "know" this alignment is good, caller used kmalloc()...
- *((__le32 *) buf) = cpu_to_le32 (status);
+ put_unaligned(cpu_to_le32 (status), (__le32 *) buf);
break;
case SetHubFeature:
switch (wValue) {
/* status change bits: nonzero writes will clear */
#define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
+/* suspend/resume bits: port suspended or port resuming */
+#define SUSPEND_BITS (USBPORTSC_SUSP | USBPORTSC_RD)
+
/* A port that either is connected or has a changed-bit set will prevent
* us from AUTO_STOPPING.
*/
int status;
int i;
- if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
- CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
+ if (inw(port_addr) & SUSPEND_BITS) {
+ CLR_RH_PORTSTAT(SUSPEND_BITS);
if (test_bit(port, &uhci->resuming_ports))
set_bit(port, &uhci->port_c_suspend);
* Experiments show that some controllers take longer, so
* we'll poll for completion. */
for (i = 0; i < 10; ++i) {
- if (!(inw(port_addr) & USBPORTSC_RD))
+ if (!(inw(port_addr) & SUSPEND_BITS))
break;
udelay(1);
}
wPortStatus |= USB_PORT_STAT_CONNECTION;
if (status & USBPORTSC_PE) {
wPortStatus |= USB_PORT_STAT_ENABLE;
- if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
+ if (status & SUSPEND_BITS)
wPortStatus |= USB_PORT_STAT_SUSPEND;
}
if (status & USBPORTSC_OC)
{
int result;
printk(KERN_INFO "driver %s built at %s on %s\n", ftdi_elan_driver.name,
- __TIME__, __DATE__);
+ __TIME__, __DATE__);
init_MUTEX(&ftdi_module_lock);
INIT_LIST_HEAD(&ftdi_static_list);
status_queue = create_singlethread_workqueue("ftdi-status-control");
+ if (!status_queue)
+ goto err1;
command_queue = create_singlethread_workqueue("ftdi-command-engine");
+ if (!command_queue)
+ goto err2;
respond_queue = create_singlethread_workqueue("ftdi-respond-engine");
+ if (!respond_queue)
+ goto err3;
result = usb_register(&ftdi_elan_driver);
if (result)
printk(KERN_ERR "usb_register failed. Error number %d\n",
- result);
+ result);
return result;
+
+ err3:
+ destroy_workqueue(command_queue);
+ err2:
+ destroy_workqueue(status_queue);
+ err1:
+ printk(KERN_ERR "%s couldn't create workqueue\n", ftdi_elan_driver.name);
+ return -ENOMEM;
}
static void __exit ftdi_elan_exit(void)
};
static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(0x07aa, 0x9601), /* Corega FEther USB-TXC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{
USB_DEVICE(0x0a46, 0x9601), /* Davicom USB-100 */
.driver_info = (unsigned long)&dm9601_info,
int outstanding_urbs;
int throttled;
struct urb *read_urbp[NUM_READ_URBS];
+
+ /* Settings for the port */
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
};
+static int airprime_send_setup(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct airprime_private *priv;
+
+ dbg("%s", __FUNCTION__);
+
+ if (port->number != 0)
+ return 0;
+
+ priv = usb_get_serial_port_data(port);
+
+ if (port->tty) {
+ int val = 0;
+ if (priv->dtr_state)
+ val |= 0x01;
+ if (priv->rts_state)
+ val |= 0x02;
+
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ }
+
+ return 0;
+}
+
static void airprime_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
usb_set_serial_port_data(port, priv);
}
+ /* Set some sane defaults */
+ priv->rts_state = 1;
+ priv->dtr_state = 1;
+
for (i = 0; i < NUM_READ_URBS; ++i) {
buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
/* remember this urb so we can kill it when the port is closed */
priv->read_urbp[i] = urb;
}
+
+ airprime_send_setup(port);
+
goto out;
errout:
dbg("%s - port %d", __FUNCTION__, port->number);
+ priv->rts_state = 0;
+ priv->dtr_state = 0;
+
+ airprime_send_setup(port);
+
for (i = 0; i < NUM_READ_URBS; ++i) {
usb_kill_urb (priv->read_urbp[i]);
kfree (priv->read_urbp[i]->transfer_buffer);
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
* These will probably use user-space drivers. Uncomment them if
* you need them or use the user-specified vendor/product module
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+ { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
[FT8U232AM] = "FT8U232AM",
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
+ [FT232RL] = "FT232RL",
};
static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id);
static int ftdi_sio_attach (struct usb_serial *serial);
static void ftdi_shutdown (struct usb_serial *serial);
+static int ftdi_sio_port_probe (struct usb_serial_port *port);
+static int ftdi_sio_port_remove (struct usb_serial_port *port);
static int ftdi_open (struct usb_serial_port *port, struct file *filp);
static void ftdi_close (struct usb_serial_port *port, struct file *filp);
static int ftdi_write (struct usb_serial_port *port, const unsigned char *buf, int count);
.num_bulk_out = 1,
.num_ports = 1,
.probe = ftdi_sio_probe,
+ .port_probe = ftdi_sio_port_probe,
+ .port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev;
+ struct usb_device *udev = port->serial->dev;
unsigned short latency = 0;
int rv = 0;
- udev = to_usb_device(dev);
dbg("%s",__FUNCTION__);
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev;
+ struct usb_device *udev = port->serial->dev;
char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- udev = to_usb_device(dev);
-
dbg("%s: setting latency timer = %i", __FUNCTION__, v);
rv = usb_control_msg(udev,
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev;
+ struct usb_device *udev = port->serial->dev;
char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- udev = to_usb_device(dev);
-
dbg("%s: setting event char = %i", __FUNCTION__, v);
rv = usb_control_msg(udev,
static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
-static int create_sysfs_attrs(struct usb_serial *serial)
+static int create_sysfs_attrs(struct usb_serial_port *port)
{
- struct ftdi_private *priv;
- struct usb_device *udev;
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
int retval = 0;
dbg("%s",__FUNCTION__);
- priv = usb_get_serial_port_data(serial->port[0]);
- udev = serial->dev;
-
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
- retval = device_create_file(&udev->dev, &dev_attr_event_char);
+ retval = device_create_file(&port->dev, &dev_attr_event_char);
if ((!retval) &&
(priv->chip_type == FT232BM || priv->chip_type == FT2232C)) {
- retval = device_create_file(&udev->dev,
+ retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
}
return retval;
}
-static void remove_sysfs_attrs(struct usb_serial *serial)
+static void remove_sysfs_attrs(struct usb_serial_port *port)
{
- struct ftdi_private *priv;
- struct usb_device *udev;
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s",__FUNCTION__);
- priv = usb_get_serial_port_data(serial->port[0]);
- udev = serial->dev;
-
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
- device_remove_file(&udev->dev, &dev_attr_event_char);
+ device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
- device_remove_file(&udev->dev, &dev_attr_latency_timer);
+ device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
return (0);
}
-/* attach subroutine */
-static int ftdi_sio_attach (struct usb_serial *serial)
+static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
- struct usb_serial_port *port = serial->port[0];
struct ftdi_private *priv;
- struct ftdi_sio_quirk *quirk;
- int retval;
dbg("%s",__FUNCTION__);
kfree(port->bulk_out_buffer);
port->bulk_out_buffer = NULL;
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
- ftdi_determine_type (serial->port[0]);
- retval = create_sysfs_attrs(serial);
- if (retval)
- dev_err(&serial->dev->dev, "Error creating sysfs files, "
- "continuing\n");
+ ftdi_determine_type (port);
+ create_sysfs_attrs(port);
+ return 0;
+}
+/* attach subroutine */
+static int ftdi_sio_attach (struct usb_serial *serial)
+{
/* Check for device requiring special set up. */
- quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
- if (quirk && quirk->setup) {
+ struct ftdi_sio_quirk *quirk = usb_get_serial_data(serial);
+
+ if (quirk && quirk->setup)
quirk->setup(serial);
- }
return 0;
} /* ftdi_sio_attach */
* calls __serial_close for each open of the port
* shutdown is called then (ie ftdi_shutdown)
*/
-
-
static void ftdi_shutdown (struct usb_serial *serial)
-{ /* ftdi_shutdown */
+{
+ dbg("%s", __FUNCTION__);
+}
- struct usb_serial_port *port = serial->port[0];
+static int ftdi_sio_port_remove(struct usb_serial_port *port)
+{
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s", __FUNCTION__);
- remove_sysfs_attrs(serial);
+ remove_sysfs_attrs(port);
/* all open ports are closed at this point
* (by usbserial.c:__serial_close, which calls ftdi_close)
usb_set_serial_port_data(port, NULL);
kfree(priv);
}
-} /* ftdi_shutdown */
+ return 0;
+}
static int ftdi_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_open */
#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
*/
#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID 0x103E /* Vendor Id */
+#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
+
/*
* Definitions for B&B Electronics products.
*/
#define TELLDUS_VID 0x1781 /* Vendor ID */
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
+/*
+ * IBS elektronik product ids
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID 0xff3f /* future device */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
FT8U232AM = 2,
FT232BM = 3,
FT2232C = 4,
+ FT232RL = 5,
} ftdi_chip_type_t;
typedef enum {
{ USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
{ USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
{ USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
+ { USB_DEVICE(0x04AD, 0x0306) }, /* GPS Pocket PC USB Sync */
+ { USB_DEVICE(0x04B7, 0x0531) }, /* MyGuide 7000 XL USB Sync */
{ USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
continue;
*minor = i;
+ j = 0;
dbg("%s - minor base = %d", __FUNCTION__, *minor);
- for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
+ for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
serial_table[i] = serial;
+ serial->port[j++]->number = i;
+ }
spin_unlock(&table_lock);
return serial;
}
dbg("%s - %s", __FUNCTION__, serial->type->description);
- serial->type->shutdown(serial);
-
- /* return the minor range that this device had */
- return_serial(serial);
-
for (i = 0; i < serial->num_ports; ++i)
serial->port[i]->open_count = 0;
serial->port[i] = NULL;
}
+ if (serial->type->shutdown)
+ serial->type->shutdown(serial);
+
+ /* return the minor range that this device had */
+ return_serial(serial);
+
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
num_ports = type->num_ports;
}
- serial->minor = minor;
serial->num_ports = num_ports;
serial->num_bulk_in = num_bulk_in;
serial->num_bulk_out = num_bulk_out;
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
goto probe_error;
- port->number = i + serial->minor;
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
dev_err(&interface->dev, "No more free serial devices\n");
goto probe_error;
}
+ serial->minor = minor;
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
kfree(port->interrupt_out_buffer);
}
- /* return the minor range that this device had */
- return_serial (serial);
-
/* free up any memory that we allocated */
for (i = 0; i < serial->num_port_pointers; ++i)
kfree(serial->port[i]);
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Andrew Nayenko <relan@bk.ru> */
+UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
+ "Nokia",
+ "Nokia 6288",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Thomas Baechler <thomas@archlinux.org>
- * Fixes I/O errors with Teac HD-35PU devices
- */
-
-UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
- "Super Top",
- "USB 2.0 IDE DEVICE",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE),
-
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
} while(0)
extern struct kimage *ia64_kimage;
-DECLARE_PER_CPU(u64, ia64_mca_pal_base);
extern const unsigned int relocate_new_kernel_size;
extern void relocate_new_kernel(unsigned long, unsigned long,
struct ia64_boot_param *, unsigned long);
int *monarch_cpu;
};
+DECLARE_PER_CPU(u64, ia64_mca_pal_base);
+
#else /* __ASSEMBLY__ */
#define IA64_MCA_CORRECTED 0x0 /* Error has been corrected by OS_MCA */
* dependent
*/
+#define PAL_TLB_CHECK_OP_PURGE 8
typedef struct pal_process_state_info_s {
u64 reserved1 : 2,
#include <asm/io.h>
#include <asm/scatterlist.h>
+#include <asm/hw_irq.h>
/*
* Can be used to override the logic in pci_scan_bus for skipping already-configured bus
#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
- return channel ? 15 : 14;
+ return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
}
#endif /* _ASM_IA64_PCI_H */
*/
struct sal_to_os_boot {
u64 rr[8]; /* Region Registers */
- u64 br[6]; /* br0: return addr into SAL boot rendez routine */
+ u64 br[6]; /* br0:
+ * return addr into SAL boot rendez routine */
u64 gr1; /* SAL:GP */
u64 gr12; /* SAL:SP */
u64 gr13; /* SAL: Task Pointer */
u64 fpsr;
- u64 pfs;
+ u64 pfs;
u64 rnat;
u64 unat;
u64 bspstore;
struct unw_ireg {
unsigned long *loc;
struct unw_ireg_nat {
- long type : 3; /* enum unw_nat_type */
+ unsigned long type : 3; /* enum unw_nat_type */
signed long off : 61; /* NaT word is at loc+nat.off */
} nat;
} r4, r5, r6, r7;
+++ /dev/null
-/*
- * Copyright (C) 2001 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __ASM_SIBYTE_TRACE_PROF_H
-#define __ASM_SIBYTE_TRACE_PROF_H
-
-#undef DBG
-#if SBPROF_TB_DEBUG
-#define DBG(a) a
-#else
-#define DBG(a)
-#endif
-
-#define SBPROF_TB_MAJOR 240
-#define DEVNAME "bcm1250_tbprof"
-
-typedef u_int64_t tb_sample_t[6*256];
-
-struct sbprof_tb {
- int open;
- tb_sample_t *sbprof_tbbuf;
- int next_tb_sample;
-
- volatile int tb_enable;
- volatile int tb_armed;
-
- wait_queue_head_t tb_sync;
- wait_queue_head_t tb_read;
-};
-
-#define MAX_SAMPLE_BYTES (24*1024*1024)
-#define MAX_TBSAMPLE_BYTES (12*1024*1024)
-
-#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
-#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
-#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
-
-/* IOCTLs */
-#define SBPROF_ZBSTART _IOW('s', 0, int)
-#define SBPROF_ZBSTOP _IOW('s', 1, int)
-#define SBPROF_ZBWAITFULL _IOW('s', 2, int)
-
-/***************************************************************************
- * Routines for gathering ZBbus profiles using trace buffer
- ***************************************************************************/
-
-/* Requires: Already called zclk_timer_init with a value that won't
- saturate 40 bits. No subsequent use of SCD performance counters
- or trace buffer.
- Effect: Starts gathering random ZBbus profiles using trace buffer. */
-extern int sbprof_zbprof_start(struct file *filp);
-
-/* Effect: Stops collection of ZBbus profiles */
-extern int sbprof_zbprof_stop(void);
-
-
-/***************************************************************************
- * Routines for using 40-bit SCD cycle counter
- *
- * Client responsible for either handling interrupts or making sure
- * the cycles counter never saturates, e.g., by doing
- * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
- ***************************************************************************/
-
-/* Configures SCD counter 0 to count ZCLKs starting from val;
- Configures SCD counters1,2,3 to count nothing.
- Must not be called while gathering ZBbus profiles.
-
-unsigned long long val; */
-#define zclk_timer_init(val) \
- __asm__ __volatile__ (".set push;" \
- ".set mips64;" \
- "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
- "sd %0, 0x10($8);" /* write val to counter0 */ \
- "sd %1, 0($8);" /* config counter0 for zclks*/ \
- ".set pop" \
- : /* no outputs */ \
- /* enable, counter0 */ \
- : /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
- : /* modifies */ "$8" )
-
-
-/* Reads SCD counter 0 and puts result in value
- unsigned long long val; */
-#define zclk_get(val) \
- __asm__ __volatile__ (".set push;" \
- ".set mips64;" \
- "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
- "ld %0, 0x10($8);" /* write val to counter0 */ \
- ".set pop" \
- : /* outputs */ "=r"(val) \
- : /* inputs */ \
- : /* modifies */ "$8" )
-
-#endif /* __ASM_SIBYTE_TRACE_PROF_H */
kfree(driver_name);
}
}
- /*
- * Undo the additional reference we added in module_add_driver()
- * via kset_find_obj()
- */
- if (drv->mod_name)
- kobject_put(&drv->kobj);
}
EXPORT_SYMBOL(module_remove_driver);
#endif
goto out;
old_parent = kobj->parent;
kobj->parent = new_parent;
+ new_parent = NULL;
kobject_put(old_parent);
kobject_uevent_env(kobj, KOBJ_MOVE, envp);
out:
+ kobject_put(new_parent);
kobject_put(kobj);
kfree(devpath_string);
kfree(devpath);
git.openpandora.org / pandora-kernel.git / commitdiff