rt2800: add rt2800lib (part two)
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 4 Nov 2009 17:36:40 +0000 (18:36 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 6 Nov 2009 21:48:58 +0000 (16:48 -0500)
Code unification.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2800lib.c
drivers/net/wireless/rt2x00/rt2800lib.h
drivers/net/wireless/rt2x00/rt2800pci.c
drivers/net/wireless/rt2x00/rt2800usb.c

index 3cbe854..ba88d64 100644 (file)
@@ -242,3 +242,835 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
        mutex_unlock(&rt2x00dev->csr_mutex);
 }
 EXPORT_SYMBOL_GPL(rt2800_mcu_request);
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+const struct rt2x00debug rt2800_rt2x00debug = {
+       .owner  = THIS_MODULE,
+       .csr    = {
+               .read           = rt2800_register_read,
+               .write          = rt2800_register_write,
+               .flags          = RT2X00DEBUGFS_OFFSET,
+               .word_base      = CSR_REG_BASE,
+               .word_size      = sizeof(u32),
+               .word_count     = CSR_REG_SIZE / sizeof(u32),
+       },
+       .eeprom = {
+               .read           = rt2x00_eeprom_read,
+               .write          = rt2x00_eeprom_write,
+               .word_base      = EEPROM_BASE,
+               .word_size      = sizeof(u16),
+               .word_count     = EEPROM_SIZE / sizeof(u16),
+       },
+       .bbp    = {
+               .read           = rt2800_bbp_read,
+               .write          = rt2800_bbp_write,
+               .word_base      = BBP_BASE,
+               .word_size      = sizeof(u8),
+               .word_count     = BBP_SIZE / sizeof(u8),
+       },
+       .rf     = {
+               .read           = rt2x00_rf_read,
+               .write          = rt2800_rf_write,
+               .word_base      = RF_BASE,
+               .word_size      = sizeof(u32),
+               .word_count     = RF_SIZE / sizeof(u32),
+       },
+};
+EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+       u32 reg;
+
+       rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+       return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800_brightness_set(struct led_classdev *led_cdev,
+                                 enum led_brightness brightness)
+{
+       struct rt2x00_led *led =
+           container_of(led_cdev, struct rt2x00_led, led_dev);
+       unsigned int enabled = brightness != LED_OFF;
+       unsigned int bg_mode =
+           (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+       unsigned int polarity =
+               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+                                  EEPROM_FREQ_LED_POLARITY);
+       unsigned int ledmode =
+               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+                                  EEPROM_FREQ_LED_MODE);
+
+       if (led->type == LED_TYPE_RADIO) {
+               rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+                                     enabled ? 0x20 : 0);
+       } else if (led->type == LED_TYPE_ASSOC) {
+               rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+                                     enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+       } else if (led->type == LED_TYPE_QUALITY) {
+               /*
+                * The brightness is divided into 6 levels (0 - 5),
+                * The specs tell us the following levels:
+                *      0, 1 ,3, 7, 15, 31
+                * to determine the level in a simple way we can simply
+                * work with bitshifting:
+                *      (1 << level) - 1
+                */
+               rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+                                     (1 << brightness / (LED_FULL / 6)) - 1,
+                                     polarity);
+       }
+}
+
+static int rt2800_blink_set(struct led_classdev *led_cdev,
+                           unsigned long *delay_on, unsigned long *delay_off)
+{
+       struct rt2x00_led *led =
+           container_of(led_cdev, struct rt2x00_led, led_dev);
+       u32 reg;
+
+       rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
+       rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+       rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+       rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+       rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+       rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+       rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+       rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+       rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
+
+       return 0;
+}
+
+void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+                    struct rt2x00_led *led, enum led_type type)
+{
+       led->rt2x00dev = rt2x00dev;
+       led->type = type;
+       led->led_dev.brightness_set = rt2800_brightness_set;
+       led->led_dev.blink_set = rt2800_blink_set;
+       led->flags = LED_INITIALIZED;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_led);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+                                   struct rt2x00lib_crypto *crypto,
+                                   struct ieee80211_key_conf *key)
+{
+       struct mac_wcid_entry wcid_entry;
+       struct mac_iveiv_entry iveiv_entry;
+       u32 offset;
+       u32 reg;
+
+       offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+       rt2800_register_read(rt2x00dev, offset, &reg);
+       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+                          !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+                          (crypto->cmd == SET_KEY) * crypto->cipher);
+       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+                          (crypto->cmd == SET_KEY) * crypto->bssidx);
+       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+       rt2800_register_write(rt2x00dev, offset, reg);
+
+       offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+       memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+       if ((crypto->cipher == CIPHER_TKIP) ||
+           (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+           (crypto->cipher == CIPHER_AES))
+               iveiv_entry.iv[3] |= 0x20;
+       iveiv_entry.iv[3] |= key->keyidx << 6;
+       rt2800_register_multiwrite(rt2x00dev, offset,
+                                     &iveiv_entry, sizeof(iveiv_entry));
+
+       offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+       memset(&wcid_entry, 0, sizeof(wcid_entry));
+       if (crypto->cmd == SET_KEY)
+               memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+       rt2800_register_multiwrite(rt2x00dev, offset,
+                                     &wcid_entry, sizeof(wcid_entry));
+}
+
+int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+                            struct rt2x00lib_crypto *crypto,
+                            struct ieee80211_key_conf *key)
+{
+       struct hw_key_entry key_entry;
+       struct rt2x00_field32 field;
+       u32 offset;
+       u32 reg;
+
+       if (crypto->cmd == SET_KEY) {
+               key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+               memcpy(key_entry.key, crypto->key,
+                      sizeof(key_entry.key));
+               memcpy(key_entry.tx_mic, crypto->tx_mic,
+                      sizeof(key_entry.tx_mic));
+               memcpy(key_entry.rx_mic, crypto->rx_mic,
+                      sizeof(key_entry.rx_mic));
+
+               offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+               rt2800_register_multiwrite(rt2x00dev, offset,
+                                             &key_entry, sizeof(key_entry));
+       }
+
+       /*
+        * The cipher types are stored over multiple registers
+        * starting with SHARED_KEY_MODE_BASE each word will have
+        * 32 bits and contains the cipher types for 2 bssidx each.
+        * Using the correct defines correctly will cause overhead,
+        * so just calculate the correct offset.
+        */
+       field.bit_offset = 4 * (key->hw_key_idx % 8);
+       field.bit_mask = 0x7 << field.bit_offset;
+
+       offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+       rt2800_register_read(rt2x00dev, offset, &reg);
+       rt2x00_set_field32(&reg, field,
+                          (crypto->cmd == SET_KEY) * crypto->cipher);
+       rt2800_register_write(rt2x00dev, offset, reg);
+
+       /*
+        * Update WCID information
+        */
+       rt2800_config_wcid_attr(rt2x00dev, crypto, key);
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
+
+int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+                              struct rt2x00lib_crypto *crypto,
+                              struct ieee80211_key_conf *key)
+{
+       struct hw_key_entry key_entry;
+       u32 offset;
+
+       if (crypto->cmd == SET_KEY) {
+               /*
+                * 1 pairwise key is possible per AID, this means that the AID
+                * equals our hw_key_idx. Make sure the WCID starts _after_ the
+                * last possible shared key entry.
+                */
+               if (crypto->aid > (256 - 32))
+                       return -ENOSPC;
+
+               key->hw_key_idx = 32 + crypto->aid;
+
+               memcpy(key_entry.key, crypto->key,
+                      sizeof(key_entry.key));
+               memcpy(key_entry.tx_mic, crypto->tx_mic,
+                      sizeof(key_entry.tx_mic));
+               memcpy(key_entry.rx_mic, crypto->rx_mic,
+                      sizeof(key_entry.rx_mic));
+
+               offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+               rt2800_register_multiwrite(rt2x00dev, offset,
+                                             &key_entry, sizeof(key_entry));
+       }
+
+       /*
+        * Update WCID information
+        */
+       rt2800_config_wcid_attr(rt2x00dev, crypto, key);
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
+
+void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
+                         const unsigned int filter_flags)
+{
+       u32 reg;
+
+       /*
+        * Start configuration steps.
+        * Note that the version error will always be dropped
+        * and broadcast frames will always be accepted since
+        * there is no filter for it at this time.
+        */
+       rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+                          !(filter_flags & FIF_FCSFAIL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+                          !(filter_flags & FIF_PLCPFAIL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+                          !(filter_flags & FIF_PROMISC_IN_BSS));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+                          !(filter_flags & FIF_ALLMULTI));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+                          !(filter_flags & FIF_CONTROL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+                          !(filter_flags & FIF_CONTROL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+                          !(filter_flags & FIF_CONTROL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+                          !(filter_flags & FIF_CONTROL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+                          !(filter_flags & FIF_CONTROL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+                          !(filter_flags & FIF_PSPOLL));
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+                          !(filter_flags & FIF_CONTROL));
+       rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_filter);
+
+void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
+                       struct rt2x00intf_conf *conf, const unsigned int flags)
+{
+       unsigned int beacon_base;
+       u32 reg;
+
+       if (flags & CONFIG_UPDATE_TYPE) {
+               /*
+                * Clear current synchronisation setup.
+                * For the Beacon base registers we only need to clear
+                * the first byte since that byte contains the VALID and OWNER
+                * bits which (when set to 0) will invalidate the entire beacon.
+                */
+               beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+               rt2800_register_write(rt2x00dev, beacon_base, 0);
+
+               /*
+                * Enable synchronisation.
+                */
+               rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+               rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+               rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+               rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+               rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+       }
+
+       if (flags & CONFIG_UPDATE_MAC) {
+               reg = le32_to_cpu(conf->mac[1]);
+               rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+               conf->mac[1] = cpu_to_le32(reg);
+
+               rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+                                             conf->mac, sizeof(conf->mac));
+       }
+
+       if (flags & CONFIG_UPDATE_BSSID) {
+               reg = le32_to_cpu(conf->bssid[1]);
+               rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+               rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+               conf->bssid[1] = cpu_to_le32(reg);
+
+               rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+                                             conf->bssid, sizeof(conf->bssid));
+       }
+}
+EXPORT_SYMBOL_GPL(rt2800_config_intf);
+
+void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp)
+{
+       u32 reg;
+
+       rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+       rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
+       rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+       rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+       rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+                          !!erp->short_preamble);
+       rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+                          !!erp->short_preamble);
+       rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+       rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+       rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+                          erp->cts_protection ? 2 : 0);
+       rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+       rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+                                erp->basic_rates);
+       rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+       rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+       rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+       rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+       rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+       rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+       rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+       rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+       rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+       rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+       rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+       rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
+       rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+       rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+                          erp->beacon_int * 16);
+       rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_erp);
+
+void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
+{
+       u8 r1;
+       u8 r3;
+
+       rt2800_bbp_read(rt2x00dev, 1, &r1);
+       rt2800_bbp_read(rt2x00dev, 3, &r3);
+
+       /*
+        * Configure the TX antenna.
+        */
+       switch ((int)ant->tx) {
+       case 1:
+               rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+               if (rt2x00_intf_is_pci(rt2x00dev))
+                       rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+               break;
+       case 2:
+               rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+               break;
+       case 3:
+               /* Do nothing */
+               break;
+       }
+
+       /*
+        * Configure the RX antenna.
+        */
+       switch ((int)ant->rx) {
+       case 1:
+               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+               break;
+       case 2:
+               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+               break;
+       case 3:
+               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+               break;
+       }
+
+       rt2800_bbp_write(rt2x00dev, 3, r3);
+       rt2800_bbp_write(rt2x00dev, 1, r1);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_ant);
+
+static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+                                  struct rt2x00lib_conf *libconf)
+{
+       u16 eeprom;
+       short lna_gain;
+
+       if (libconf->rf.channel <= 14) {
+               rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+               lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+       } else if (libconf->rf.channel <= 64) {
+               rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+               lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+       } else if (libconf->rf.channel <= 128) {
+               rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+               lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+       } else {
+               rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+               lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+       }
+
+       rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+                                      struct ieee80211_conf *conf,
+                                      struct rf_channel *rf,
+                                      struct channel_info *info)
+{
+       rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+       if (rt2x00dev->default_ant.tx == 1)
+               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+       if (rt2x00dev->default_ant.rx == 1) {
+               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+       } else if (rt2x00dev->default_ant.rx == 2)
+               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+       if (rf->channel > 14) {
+               /*
+                * When TX power is below 0, we should increase it by 7 to
+                * make it a positive value (Minumum value is -7).
+                * However this means that values between 0 and 7 have
+                * double meaning, and we should set a 7DBm boost flag.
+                */
+               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+                                  (info->tx_power1 >= 0));
+
+               if (info->tx_power1 < 0)
+                       info->tx_power1 += 7;
+
+               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+                                  TXPOWER_A_TO_DEV(info->tx_power1));
+
+               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+                                  (info->tx_power2 >= 0));
+
+               if (info->tx_power2 < 0)
+                       info->tx_power2 += 7;
+
+               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+                                  TXPOWER_A_TO_DEV(info->tx_power2));
+       } else {
+               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+                                  TXPOWER_G_TO_DEV(info->tx_power1));
+               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+                                  TXPOWER_G_TO_DEV(info->tx_power2));
+       }
+
+       rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+       rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+
+       udelay(200);
+
+       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+       rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+
+       udelay(200);
+
+       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+       rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+                                      struct ieee80211_conf *conf,
+                                      struct rf_channel *rf,
+                                      struct channel_info *info)
+{
+       u8 rfcsr;
+
+       rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
+       rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+       rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
+       rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+       rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+       rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
+       rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+                         TXPOWER_G_TO_DEV(info->tx_power1));
+       rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+       rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+       rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+       rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+       rt2800_rfcsr_write(rt2x00dev, 24,
+                             rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+       rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+       rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+       rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+                                 struct ieee80211_conf *conf,
+                                 struct rf_channel *rf,
+                                 struct channel_info *info)
+{
+       u32 reg;
+       unsigned int tx_pin;
+       u8 bbp;
+
+       if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+               rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info);
+       else
+               rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+       /*
+        * Change BBP settings
+        */
+       rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+       rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+       rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+       rt2800_bbp_write(rt2x00dev, 86, 0);
+
+       if (rf->channel <= 14) {
+               if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+                       rt2800_bbp_write(rt2x00dev, 82, 0x62);
+                       rt2800_bbp_write(rt2x00dev, 75, 0x46);
+               } else {
+                       rt2800_bbp_write(rt2x00dev, 82, 0x84);
+                       rt2800_bbp_write(rt2x00dev, 75, 0x50);
+               }
+       } else {
+               rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+
+               if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+                       rt2800_bbp_write(rt2x00dev, 75, 0x46);
+               else
+                       rt2800_bbp_write(rt2x00dev, 75, 0x50);
+       }
+
+       rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+       rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+       rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+       rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+       rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+       tx_pin = 0;
+
+       /* Turn on unused PA or LNA when not using 1T or 1R */
+       if (rt2x00dev->default_ant.tx != 1) {
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+       }
+
+       /* Turn on unused PA or LNA when not using 1T or 1R */
+       if (rt2x00dev->default_ant.rx != 1) {
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+       }
+
+       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+       rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+       rt2800_bbp_read(rt2x00dev, 4, &bbp);
+       rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+       rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+       rt2800_bbp_read(rt2x00dev, 3, &bbp);
+       rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+       rt2800_bbp_write(rt2x00dev, 3, bbp);
+
+       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+               if (conf_is_ht40(conf)) {
+                       rt2800_bbp_write(rt2x00dev, 69, 0x1a);
+                       rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+                       rt2800_bbp_write(rt2x00dev, 73, 0x16);
+               } else {
+                       rt2800_bbp_write(rt2x00dev, 69, 0x16);
+                       rt2800_bbp_write(rt2x00dev, 70, 0x08);
+                       rt2800_bbp_write(rt2x00dev, 73, 0x11);
+               }
+       }
+
+       msleep(1);
+}
+
+static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
+                                 const int txpower)
+{
+       u32 reg;
+       u32 value = TXPOWER_G_TO_DEV(txpower);
+       u8 r1;
+
+       rt2800_bbp_read(rt2x00dev, 1, &r1);
+       rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+       rt2800_bbp_write(rt2x00dev, 1, r1);
+
+       rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+       rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+       rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+       rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+       rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+       rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+       rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+       rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+       rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+       rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+                                     struct rt2x00lib_conf *libconf)
+{
+       u32 reg;
+
+       rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+       rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+                          libconf->conf->short_frame_max_tx_count);
+       rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+                          libconf->conf->long_frame_max_tx_count);
+       rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+       rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+       rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+       rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+       rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
+                            struct rt2x00lib_conf *libconf)
+{
+       enum dev_state state =
+           (libconf->conf->flags & IEEE80211_CONF_PS) ?
+               STATE_SLEEP : STATE_AWAKE;
+       u32 reg;
+
+       if (state == STATE_SLEEP) {
+               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+               rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+                                  libconf->conf->listen_interval - 1);
+               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+               rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+       } else {
+               rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+               rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+       }
+}
+
+void rt2800_config(struct rt2x00_dev *rt2x00dev,
+                  struct rt2x00lib_conf *libconf,
+                  const unsigned int flags)
+{
+       /* Always recalculate LNA gain before changing configuration */
+       rt2800_config_lna_gain(rt2x00dev, libconf);
+
+       if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+               rt2800_config_channel(rt2x00dev, libconf->conf,
+                                     &libconf->rf, &libconf->channel);
+       if (flags & IEEE80211_CONF_CHANGE_POWER)
+               rt2800_config_txpower(rt2x00dev, libconf->conf->power_level);
+       if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+               rt2800_config_retry_limit(rt2x00dev, libconf);
+       if (flags & IEEE80211_CONF_CHANGE_PS)
+               rt2800_config_ps(rt2x00dev, libconf);
+}
+EXPORT_SYMBOL_GPL(rt2800_config);
+
+/*
+ * Link tuning
+ */
+void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
+{
+       u32 reg;
+
+       /*
+        * Update FCS error count from register.
+        */
+       rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+       qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+EXPORT_SYMBOL_GPL(rt2800_link_stats);
+
+static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+       if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+               if (rt2x00_intf_is_usb(rt2x00dev) &&
+                   rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+                       return 0x1c + (2 * rt2x00dev->lna_gain);
+               else
+                       return 0x2e + rt2x00dev->lna_gain;
+       }
+
+       if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+               return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+       else
+               return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
+                                 struct link_qual *qual, u8 vgc_level)
+{
+       if (qual->vgc_level != vgc_level) {
+               rt2800_bbp_write(rt2x00dev, 66, vgc_level);
+               qual->vgc_level = vgc_level;
+               qual->vgc_level_reg = vgc_level;
+       }
+}
+
+void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
+{
+       rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
+}
+EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
+
+void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
+                      const u32 count)
+{
+       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+               return;
+
+       /*
+        * When RSSI is better then -80 increase VGC level with 0x10
+        */
+       rt2800_set_vgc(rt2x00dev, qual,
+                      rt2800_get_default_vgc(rt2x00dev) +
+                      ((qual->rssi > -80) * 0x10));
+}
+EXPORT_SYMBOL_GPL(rt2800_link_tuner);
index 40a7f72..b07caba 100644 (file)
@@ -110,4 +110,29 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
                        const u8 command, const u8 token,
                        const u8 arg0, const u8 arg1);
 
+extern const struct rt2x00debug rt2800_rt2x00debug;
+
+int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
+void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+                    struct rt2x00_led *led, enum led_type type);
+int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+                            struct rt2x00lib_crypto *crypto,
+                            struct ieee80211_key_conf *key);
+int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+                              struct rt2x00lib_crypto *crypto,
+                              struct ieee80211_key_conf *key);
+void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
+                         const unsigned int filter_flags);
+void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
+                       struct rt2x00intf_conf *conf, const unsigned int flags);
+void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp);
+void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant);
+void rt2800_config(struct rt2x00_dev *rt2x00dev,
+                  struct rt2x00lib_conf *libconf,
+                  const unsigned int flags);
+void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
+void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
+void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
+                      const u32 count);
+
 #endif /* RT2800LIB_H */
index 90ada5d..cbf8be3 100644 (file)
@@ -187,830 +187,6 @@ static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
 }
 #endif /* CONFIG_RT2800PCI_PCI */
 
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-static const struct rt2x00debug rt2800pci_rt2x00debug = {
-       .owner  = THIS_MODULE,
-       .csr    = {
-               .read           = rt2800_register_read,
-               .write          = rt2800_register_write,
-               .flags          = RT2X00DEBUGFS_OFFSET,
-               .word_base      = CSR_REG_BASE,
-               .word_size      = sizeof(u32),
-               .word_count     = CSR_REG_SIZE / sizeof(u32),
-       },
-       .eeprom = {
-               .read           = rt2x00_eeprom_read,
-               .write          = rt2x00_eeprom_write,
-               .word_base      = EEPROM_BASE,
-               .word_size      = sizeof(u16),
-               .word_count     = EEPROM_SIZE / sizeof(u16),
-       },
-       .bbp    = {
-               .read           = rt2800_bbp_read,
-               .write          = rt2800_bbp_write,
-               .word_base      = BBP_BASE,
-               .word_size      = sizeof(u8),
-               .word_count     = BBP_SIZE / sizeof(u8),
-       },
-       .rf     = {
-               .read           = rt2x00_rf_read,
-               .write          = rt2800_rf_write,
-               .word_base      = RF_BASE,
-               .word_size      = sizeof(u32),
-               .word_count     = RF_SIZE / sizeof(u32),
-       },
-};
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-
-static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-{
-       u32 reg;
-
-       rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
-       return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-}
-
-#ifdef CONFIG_RT2X00_LIB_LEDS
-static void rt2800pci_brightness_set(struct led_classdev *led_cdev,
-                                    enum led_brightness brightness)
-{
-       struct rt2x00_led *led =
-           container_of(led_cdev, struct rt2x00_led, led_dev);
-       unsigned int enabled = brightness != LED_OFF;
-       unsigned int bg_mode =
-           (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-       unsigned int polarity =
-               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-                                  EEPROM_FREQ_LED_POLARITY);
-       unsigned int ledmode =
-               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-                                  EEPROM_FREQ_LED_MODE);
-
-       if (led->type == LED_TYPE_RADIO) {
-               rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-                                     enabled ? 0x20 : 0);
-       } else if (led->type == LED_TYPE_ASSOC) {
-               rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-                                     enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-       } else if (led->type == LED_TYPE_QUALITY) {
-               /*
-                * The brightness is divided into 6 levels (0 - 5),
-                * The specs tell us the following levels:
-                *      0, 1 ,3, 7, 15, 31
-                * to determine the level in a simple way we can simply
-                * work with bitshifting:
-                *      (1 << level) - 1
-                */
-               rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-                                     (1 << brightness / (LED_FULL / 6)) - 1,
-                                     polarity);
-       }
-}
-
-static int rt2800pci_blink_set(struct led_classdev *led_cdev,
-                              unsigned long *delay_on,
-                              unsigned long *delay_off)
-{
-       struct rt2x00_led *led =
-           container_of(led_cdev, struct rt2x00_led, led_dev);
-       u32 reg;
-
-       rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
-       rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
-       rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
-       rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
-       rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-       rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
-       rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
-       rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
-       rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
-
-       return 0;
-}
-
-static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev,
-                              struct rt2x00_led *led,
-                              enum led_type type)
-{
-       led->rt2x00dev = rt2x00dev;
-       led->type = type;
-       led->led_dev.brightness_set = rt2800pci_brightness_set;
-       led->led_dev.blink_set = rt2800pci_blink_set;
-       led->flags = LED_INITIALIZED;
-}
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-/*
- * Configuration handlers.
- */
-static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-                                      struct rt2x00lib_crypto *crypto,
-                                      struct ieee80211_key_conf *key)
-{
-       struct mac_wcid_entry wcid_entry;
-       struct mac_iveiv_entry iveiv_entry;
-       u32 offset;
-       u32 reg;
-
-       offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-
-       rt2800_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-                          !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-                          (crypto->cmd == SET_KEY) * crypto->cipher);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-                          (crypto->cmd == SET_KEY) * crypto->bssidx);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-       rt2800_register_write(rt2x00dev, offset, reg);
-
-       offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-
-       memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-       if ((crypto->cipher == CIPHER_TKIP) ||
-           (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-           (crypto->cipher == CIPHER_AES))
-               iveiv_entry.iv[3] |= 0x20;
-       iveiv_entry.iv[3] |= key->keyidx << 6;
-       rt2800_register_multiwrite(rt2x00dev, offset,
-                                     &iveiv_entry, sizeof(iveiv_entry));
-
-       offset = MAC_WCID_ENTRY(key->hw_key_idx);
-
-       memset(&wcid_entry, 0, sizeof(wcid_entry));
-       if (crypto->cmd == SET_KEY)
-               memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-       rt2800_register_multiwrite(rt2x00dev, offset,
-                                     &wcid_entry, sizeof(wcid_entry));
-}
-
-static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
-                                      struct rt2x00lib_crypto *crypto,
-                                      struct ieee80211_key_conf *key)
-{
-       struct hw_key_entry key_entry;
-       struct rt2x00_field32 field;
-       u32 offset;
-       u32 reg;
-
-       if (crypto->cmd == SET_KEY) {
-               key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-
-               memcpy(key_entry.key, crypto->key,
-                      sizeof(key_entry.key));
-               memcpy(key_entry.tx_mic, crypto->tx_mic,
-                      sizeof(key_entry.tx_mic));
-               memcpy(key_entry.rx_mic, crypto->rx_mic,
-                      sizeof(key_entry.rx_mic));
-
-               offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-               rt2800_register_multiwrite(rt2x00dev, offset,
-                                             &key_entry, sizeof(key_entry));
-       }
-
-       /*
-        * The cipher types are stored over multiple registers
-        * starting with SHARED_KEY_MODE_BASE each word will have
-        * 32 bits and contains the cipher types for 2 bssidx each.
-        * Using the correct defines correctly will cause overhead,
-        * so just calculate the correct offset.
-        */
-       field.bit_offset = 4 * (key->hw_key_idx % 8);
-       field.bit_mask = 0x7 << field.bit_offset;
-
-       offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
-       rt2800_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, field,
-                          (crypto->cmd == SET_KEY) * crypto->cipher);
-       rt2800_register_write(rt2x00dev, offset, reg);
-
-       /*
-        * Update WCID information
-        */
-       rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-
-       return 0;
-}
-
-static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-                                        struct rt2x00lib_crypto *crypto,
-                                        struct ieee80211_key_conf *key)
-{
-       struct hw_key_entry key_entry;
-       u32 offset;
-
-       if (crypto->cmd == SET_KEY) {
-               /*
-                * 1 pairwise key is possible per AID, this means that the AID
-                * equals our hw_key_idx. Make sure the WCID starts _after_ the
-                * last possible shared key entry.
-                */
-               if (crypto->aid > (256 - 32))
-                       return -ENOSPC;
-
-               key->hw_key_idx = 32 + crypto->aid;
-
-
-               memcpy(key_entry.key, crypto->key,
-                      sizeof(key_entry.key));
-               memcpy(key_entry.tx_mic, crypto->tx_mic,
-                      sizeof(key_entry.tx_mic));
-               memcpy(key_entry.rx_mic, crypto->rx_mic,
-                      sizeof(key_entry.rx_mic));
-
-               offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-               rt2800_register_multiwrite(rt2x00dev, offset,
-                                             &key_entry, sizeof(key_entry));
-       }
-
-       /*
-        * Update WCID information
-        */
-       rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-
-       return 0;
-}
-
-static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev,
-                                   const unsigned int filter_flags)
-{
-       u32 reg;
-
-       /*
-        * Start configuration steps.
-        * Note that the version error will always be dropped
-        * and broadcast frames will always be accepted since
-        * there is no filter for it at this time.
-        */
-       rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
-                          !(filter_flags & FIF_FCSFAIL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
-                          !(filter_flags & FIF_PLCPFAIL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
-                          !(filter_flags & FIF_PROMISC_IN_BSS));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
-                          !(filter_flags & FIF_ALLMULTI));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
-                          !(filter_flags & FIF_PSPOLL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
-                          !(filter_flags & FIF_CONTROL));
-       rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-}
-
-static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev,
-                                 struct rt2x00_intf *intf,
-                                 struct rt2x00intf_conf *conf,
-                                 const unsigned int flags)
-{
-       unsigned int beacon_base;
-       u32 reg;
-
-       if (flags & CONFIG_UPDATE_TYPE) {
-               /*
-                * Clear current synchronisation setup.
-                * For the Beacon base registers we only need to clear
-                * the first byte since that byte contains the VALID and OWNER
-                * bits which (when set to 0) will invalidate the entire beacon.
-                */
-               beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-               rt2800_register_write(rt2x00dev, beacon_base, 0);
-
-               /*
-                * Enable synchronisation.
-                */
-               rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-               rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-               rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-               rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-               rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-       }
-
-       if (flags & CONFIG_UPDATE_MAC) {
-               reg = le32_to_cpu(conf->mac[1]);
-               rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-               conf->mac[1] = cpu_to_le32(reg);
-
-               rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-                                             conf->mac, sizeof(conf->mac));
-       }
-
-       if (flags & CONFIG_UPDATE_BSSID) {
-               reg = le32_to_cpu(conf->bssid[1]);
-               rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-               rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-               conf->bssid[1] = cpu_to_le32(reg);
-
-               rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-                                             conf->bssid, sizeof(conf->bssid));
-       }
-}
-
-static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev,
-                                struct rt2x00lib_erp *erp)
-{
-       u32 reg;
-
-       rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-       rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
-       rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-       rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
-                          !!erp->short_preamble);
-       rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
-                          !!erp->short_preamble);
-       rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-       rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
-                          erp->cts_protection ? 2 : 0);
-       rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-       rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-                                erp->basic_rates);
-       rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-       rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
-       rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-       rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-       rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-       rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-       rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
-                          erp->beacon_int * 16);
-       rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-}
-
-static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev,
-                                struct antenna_setup *ant)
-{
-       u8 r1;
-       u8 r3;
-
-       rt2800_bbp_read(rt2x00dev, 1, &r1);
-       rt2800_bbp_read(rt2x00dev, 3, &r3);
-
-       /*
-        * Configure the TX antenna.
-        */
-       switch ((int)ant->tx) {
-       case 1:
-               rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-               if (rt2x00_intf_is_pci(rt2x00dev))
-                       rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-               break;
-       case 2:
-               rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-               break;
-       case 3:
-               /* Do nothing */
-               break;
-       }
-
-       /*
-        * Configure the RX antenna.
-        */
-       switch ((int)ant->rx) {
-       case 1:
-               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-               break;
-       case 2:
-               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-               break;
-       case 3:
-               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-               break;
-       }
-
-       rt2800_bbp_write(rt2x00dev, 3, r3);
-       rt2800_bbp_write(rt2x00dev, 1, r1);
-}
-
-static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-                                     struct rt2x00lib_conf *libconf)
-{
-       u16 eeprom;
-       short lna_gain;
-
-       if (libconf->rf.channel <= 14) {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-       } else if (libconf->rf.channel <= 64) {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-       } else if (libconf->rf.channel <= 128) {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-       } else {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-       }
-
-       rt2x00dev->lna_gain = lna_gain;
-}
-
-static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-                                         struct ieee80211_conf *conf,
-                                         struct rf_channel *rf,
-                                         struct channel_info *info)
-{
-       rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-
-       if (rt2x00dev->default_ant.tx == 1)
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-
-       if (rt2x00dev->default_ant.rx == 1) {
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-       } else if (rt2x00dev->default_ant.rx == 2)
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-
-       if (rf->channel > 14) {
-               /*
-                * When TX power is below 0, we should increase it by 7 to
-                * make it a positive value (Minumum value is -7).
-                * However this means that values between 0 and 7 have
-                * double meaning, and we should set a 7DBm boost flag.
-                */
-               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-                                  (info->tx_power1 >= 0));
-
-               if (info->tx_power1 < 0)
-                       info->tx_power1 += 7;
-
-               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-                                  TXPOWER_A_TO_DEV(info->tx_power1));
-
-               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-                                  (info->tx_power2 >= 0));
-
-               if (info->tx_power2 < 0)
-                       info->tx_power2 += 7;
-
-               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-                                  TXPOWER_A_TO_DEV(info->tx_power2));
-       } else {
-               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-                                  TXPOWER_G_TO_DEV(info->tx_power1));
-               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-                                  TXPOWER_G_TO_DEV(info->tx_power2));
-       }
-
-       rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-
-       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
-       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
-       rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-
-       udelay(200);
-
-       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
-       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
-       rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-
-       udelay(200);
-
-       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
-       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
-       rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-}
-
-static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-                                         struct ieee80211_conf *conf,
-                                         struct rf_channel *rf,
-                                         struct channel_info *info)
-{
-       u8 rfcsr;
-
-       rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
-       rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3);
-
-       rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-       rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
-
-       rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-                         TXPOWER_G_TO_DEV(info->tx_power1));
-       rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
-
-       rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-       rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
-
-       rt2800_rfcsr_write(rt2x00dev, 24,
-                             rt2x00dev->calibration[conf_is_ht40(conf)]);
-
-       rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-       rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
-}
-
-static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
-                                    struct ieee80211_conf *conf,
-                                    struct rf_channel *rf,
-                                    struct channel_info *info)
-{
-       u32 reg;
-       unsigned int tx_pin;
-       u8 bbp;
-
-       if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-               rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
-       else
-               rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
-
-       /*
-        * Change BBP settings
-        */
-       rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-       rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-       rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-       rt2800_bbp_write(rt2x00dev, 86, 0);
-
-       if (rf->channel <= 14) {
-               if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-                       rt2800_bbp_write(rt2x00dev, 82, 0x62);
-                       rt2800_bbp_write(rt2x00dev, 75, 0x46);
-               } else {
-                       rt2800_bbp_write(rt2x00dev, 82, 0x84);
-                       rt2800_bbp_write(rt2x00dev, 75, 0x50);
-               }
-       } else {
-               rt2800_bbp_write(rt2x00dev, 82, 0xf2);
-
-               if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-                       rt2800_bbp_write(rt2x00dev, 75, 0x46);
-               else
-                       rt2800_bbp_write(rt2x00dev, 75, 0x50);
-       }
-
-       rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
-       rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-       rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
-       rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
-       rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
-
-       tx_pin = 0;
-
-       /* Turn on unused PA or LNA when not using 1T or 1R */
-       if (rt2x00dev->default_ant.tx != 1) {
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-       }
-
-       /* Turn on unused PA or LNA when not using 1T or 1R */
-       if (rt2x00dev->default_ant.rx != 1) {
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-       }
-
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-
-       rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-       rt2800_bbp_read(rt2x00dev, 4, &bbp);
-       rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-       rt2800_bbp_write(rt2x00dev, 4, bbp);
-
-       rt2800_bbp_read(rt2x00dev, 3, &bbp);
-       rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-       rt2800_bbp_write(rt2x00dev, 3, bbp);
-
-       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-               if (conf_is_ht40(conf)) {
-                       rt2800_bbp_write(rt2x00dev, 69, 0x1a);
-                       rt2800_bbp_write(rt2x00dev, 70, 0x0a);
-                       rt2800_bbp_write(rt2x00dev, 73, 0x16);
-               } else {
-                       rt2800_bbp_write(rt2x00dev, 69, 0x16);
-                       rt2800_bbp_write(rt2x00dev, 70, 0x08);
-                       rt2800_bbp_write(rt2x00dev, 73, 0x11);
-               }
-       }
-
-       msleep(1);
-}
-
-static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev,
-                                    const int txpower)
-{
-       u32 reg;
-       u32 value = TXPOWER_G_TO_DEV(txpower);
-       u8 r1;
-
-       rt2800_bbp_read(rt2x00dev, 1, &r1);
-       rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
-       rt2800_bbp_write(rt2x00dev, 1, r1);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-}
-
-static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-                                        struct rt2x00lib_conf *libconf)
-{
-       u32 reg;
-
-       rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
-                          libconf->conf->short_frame_max_tx_count);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
-                          libconf->conf->long_frame_max_tx_count);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-       rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
-}
-
-static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev,
-                               struct rt2x00lib_conf *libconf)
-{
-       enum dev_state state =
-           (libconf->conf->flags & IEEE80211_CONF_PS) ?
-               STATE_SLEEP : STATE_AWAKE;
-       u32 reg;
-
-       if (state == STATE_SLEEP) {
-               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-
-               rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-                                  libconf->conf->listen_interval - 1);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-
-               rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-       } else {
-               rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
-               rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-       }
-}
-
-static void rt2800pci_config(struct rt2x00_dev *rt2x00dev,
-                            struct rt2x00lib_conf *libconf,
-                            const unsigned int flags)
-{
-       /* Always recalculate LNA gain before changing configuration */
-       rt2800pci_config_lna_gain(rt2x00dev, libconf);
-
-       if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-               rt2800pci_config_channel(rt2x00dev, libconf->conf,
-                                        &libconf->rf, &libconf->channel);
-       if (flags & IEEE80211_CONF_CHANGE_POWER)
-               rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level);
-       if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-               rt2800pci_config_retry_limit(rt2x00dev, libconf);
-       if (flags & IEEE80211_CONF_CHANGE_PS)
-               rt2800pci_config_ps(rt2x00dev, libconf);
-}
-
-/*
- * Link tuning
- */
-static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev,
-                                struct link_qual *qual)
-{
-       u32 reg;
-
-       /*
-        * Update FCS error count from register.
-        */
-       rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-       qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-}
-
-static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-{
-       if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
-               return 0x2e + rt2x00dev->lna_gain;
-
-       if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-               return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-       else
-               return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-}
-
-static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev,
-                                    struct link_qual *qual, u8 vgc_level)
-{
-       if (qual->vgc_level != vgc_level) {
-               rt2800_bbp_write(rt2x00dev, 66, vgc_level);
-               qual->vgc_level = vgc_level;
-               qual->vgc_level_reg = vgc_level;
-       }
-}
-
-static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
-                                 struct link_qual *qual)
-{
-       rt2800pci_set_vgc(rt2x00dev, qual,
-                         rt2800pci_get_default_vgc(rt2x00dev));
-}
-
-static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
-                                struct link_qual *qual, const u32 count)
-{
-       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-               return;
-
-       /*
-        * When RSSI is better then -80 increase VGC level with 0x10
-        */
-       rt2800pci_set_vgc(rt2x00dev, qual,
-                         rt2800pci_get_default_vgc(rt2x00dev) +
-                         ((qual->rssi > -80) * 0x10));
-}
-
 /*
  * Firmware functions
  */
@@ -2575,9 +1751,9 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
         * Store led settings, for correct led behaviour.
         */
 #ifdef CONFIG_RT2X00_LIB_LEDS
-       rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-       rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-       rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+       rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+       rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+       rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
 
        rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
 #endif /* CONFIG_RT2X00_LIB_LEDS */
@@ -2994,23 +2170,23 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
        .get_entry_state        = rt2800pci_get_entry_state,
        .clear_entry            = rt2800pci_clear_entry,
        .set_device_state       = rt2800pci_set_device_state,
-       .rfkill_poll            = rt2800pci_rfkill_poll,
-       .link_stats             = rt2800pci_link_stats,
-       .reset_tuner            = rt2800pci_reset_tuner,
-       .link_tuner             = rt2800pci_link_tuner,
+       .rfkill_poll            = rt2800_rfkill_poll,
+       .link_stats             = rt2800_link_stats,
+       .reset_tuner            = rt2800_reset_tuner,
+       .link_tuner             = rt2800_link_tuner,
        .write_tx_desc          = rt2800pci_write_tx_desc,
        .write_tx_data          = rt2x00pci_write_tx_data,
        .write_beacon           = rt2800pci_write_beacon,
        .kick_tx_queue          = rt2800pci_kick_tx_queue,
        .kill_tx_queue          = rt2800pci_kill_tx_queue,
        .fill_rxdone            = rt2800pci_fill_rxdone,
-       .config_shared_key      = rt2800pci_config_shared_key,
-       .config_pairwise_key    = rt2800pci_config_pairwise_key,
-       .config_filter          = rt2800pci_config_filter,
-       .config_intf            = rt2800pci_config_intf,
-       .config_erp             = rt2800pci_config_erp,
-       .config_ant             = rt2800pci_config_ant,
-       .config                 = rt2800pci_config,
+       .config_shared_key      = rt2800_config_shared_key,
+       .config_pairwise_key    = rt2800_config_pairwise_key,
+       .config_filter          = rt2800_config_filter,
+       .config_intf            = rt2800_config_intf,
+       .config_erp             = rt2800_config_erp,
+       .config_ant             = rt2800_config_ant,
+       .config                 = rt2800_config,
 };
 
 static const struct data_queue_desc rt2800pci_queue_rx = {
@@ -3047,7 +2223,7 @@ static const struct rt2x00_ops rt2800pci_ops = {
        .lib            = &rt2800pci_rt2x00_ops,
        .hw             = &rt2800pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-       .debugfs        = &rt2800pci_rt2x00debug,
+       .debugfs        = &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
index 6bd646a..365f66f 100644 (file)
@@ -45,832 +45,6 @@ static int modparam_nohwcrypt = 1;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-static const struct rt2x00debug rt2800usb_rt2x00debug = {
-       .owner  = THIS_MODULE,
-       .csr    = {
-               .read           = rt2800_register_read,
-               .write          = rt2800_register_write,
-               .flags          = RT2X00DEBUGFS_OFFSET,
-               .word_base      = CSR_REG_BASE,
-               .word_size      = sizeof(u32),
-               .word_count     = CSR_REG_SIZE / sizeof(u32),
-       },
-       .eeprom = {
-               .read           = rt2x00_eeprom_read,
-               .write          = rt2x00_eeprom_write,
-               .word_base      = EEPROM_BASE,
-               .word_size      = sizeof(u16),
-               .word_count     = EEPROM_SIZE / sizeof(u16),
-       },
-       .bbp    = {
-               .read           = rt2800_bbp_read,
-               .write          = rt2800_bbp_write,
-               .word_base      = BBP_BASE,
-               .word_size      = sizeof(u8),
-               .word_count     = BBP_SIZE / sizeof(u8),
-       },
-       .rf     = {
-               .read           = rt2x00_rf_read,
-               .write          = rt2800_rf_write,
-               .word_base      = RF_BASE,
-               .word_size      = sizeof(u32),
-               .word_count     = RF_SIZE / sizeof(u32),
-       },
-};
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-
-static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-{
-       u32 reg;
-
-       rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
-       return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-}
-
-#ifdef CONFIG_RT2X00_LIB_LEDS
-static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
-                                    enum led_brightness brightness)
-{
-       struct rt2x00_led *led =
-           container_of(led_cdev, struct rt2x00_led, led_dev);
-       unsigned int enabled = brightness != LED_OFF;
-       unsigned int bg_mode =
-           (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-       unsigned int polarity =
-               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-                                  EEPROM_FREQ_LED_POLARITY);
-       unsigned int ledmode =
-               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-                                  EEPROM_FREQ_LED_MODE);
-
-       if (led->type == LED_TYPE_RADIO) {
-               rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-                                     enabled ? 0x20 : 0);
-       } else if (led->type == LED_TYPE_ASSOC) {
-               rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-                                     enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-       } else if (led->type == LED_TYPE_QUALITY) {
-               /*
-                * The brightness is divided into 6 levels (0 - 5),
-                * The specs tell us the following levels:
-                *      0, 1 ,3, 7, 15, 31
-                * to determine the level in a simple way we can simply
-                * work with bitshifting:
-                *      (1 << level) - 1
-                */
-               rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-                                     (1 << brightness / (LED_FULL / 6)) - 1,
-                                     polarity);
-       }
-}
-
-static int rt2800usb_blink_set(struct led_classdev *led_cdev,
-                              unsigned long *delay_on,
-                              unsigned long *delay_off)
-{
-       struct rt2x00_led *led =
-           container_of(led_cdev, struct rt2x00_led, led_dev);
-       u32 reg;
-
-       rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
-       rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
-       rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
-       rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
-       rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-       rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
-       rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
-       rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
-       rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
-
-       return 0;
-}
-
-static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
-                              struct rt2x00_led *led,
-                              enum led_type type)
-{
-       led->rt2x00dev = rt2x00dev;
-       led->type = type;
-       led->led_dev.brightness_set = rt2800usb_brightness_set;
-       led->led_dev.blink_set = rt2800usb_blink_set;
-       led->flags = LED_INITIALIZED;
-}
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-/*
- * Configuration handlers.
- */
-static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-                                      struct rt2x00lib_crypto *crypto,
-                                      struct ieee80211_key_conf *key)
-{
-       struct mac_wcid_entry wcid_entry;
-       struct mac_iveiv_entry iveiv_entry;
-       u32 offset;
-       u32 reg;
-
-       offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-
-       rt2800_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-                          !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-                          (crypto->cmd == SET_KEY) * crypto->cipher);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-                          (crypto->cmd == SET_KEY) * crypto->bssidx);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-       rt2800_register_write(rt2x00dev, offset, reg);
-
-       offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-
-       memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-       if ((crypto->cipher == CIPHER_TKIP) ||
-           (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-           (crypto->cipher == CIPHER_AES))
-               iveiv_entry.iv[3] |= 0x20;
-       iveiv_entry.iv[3] |= key->keyidx << 6;
-       rt2800_register_multiwrite(rt2x00dev, offset,
-                                     &iveiv_entry, sizeof(iveiv_entry));
-
-       offset = MAC_WCID_ENTRY(key->hw_key_idx);
-
-       memset(&wcid_entry, 0, sizeof(wcid_entry));
-       if (crypto->cmd == SET_KEY)
-               memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-       rt2800_register_multiwrite(rt2x00dev, offset,
-                                     &wcid_entry, sizeof(wcid_entry));
-}
-
-static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
-                                      struct rt2x00lib_crypto *crypto,
-                                      struct ieee80211_key_conf *key)
-{
-       struct hw_key_entry key_entry;
-       struct rt2x00_field32 field;
-       u32 offset;
-       u32 reg;
-
-       if (crypto->cmd == SET_KEY) {
-               key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-
-               memcpy(key_entry.key, crypto->key,
-                      sizeof(key_entry.key));
-               memcpy(key_entry.tx_mic, crypto->tx_mic,
-                      sizeof(key_entry.tx_mic));
-               memcpy(key_entry.rx_mic, crypto->rx_mic,
-                      sizeof(key_entry.rx_mic));
-
-               offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-               rt2800_register_multiwrite(rt2x00dev, offset,
-                                             &key_entry, sizeof(key_entry));
-       }
-
-       /*
-        * The cipher types are stored over multiple registers
-        * starting with SHARED_KEY_MODE_BASE each word will have
-        * 32 bits and contains the cipher types for 2 bssidx each.
-        * Using the correct defines correctly will cause overhead,
-        * so just calculate the correct offset.
-        */
-       field.bit_offset = 4 * (key->hw_key_idx % 8);
-       field.bit_mask = 0x7 << field.bit_offset;
-
-       offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
-       rt2800_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, field,
-                          (crypto->cmd == SET_KEY) * crypto->cipher);
-       rt2800_register_write(rt2x00dev, offset, reg);
-
-       /*
-        * Update WCID information
-        */
-       rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
-       return 0;
-}
-
-static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-                                        struct rt2x00lib_crypto *crypto,
-                                        struct ieee80211_key_conf *key)
-{
-       struct hw_key_entry key_entry;
-       u32 offset;
-
-       if (crypto->cmd == SET_KEY) {
-               /*
-                * 1 pairwise key is possible per AID, this means that the AID
-                * equals our hw_key_idx. Make sure the WCID starts _after_ the
-                * last possible shared key entry.
-                */
-               if (crypto->aid > (256 - 32))
-                       return -ENOSPC;
-
-               key->hw_key_idx = 32 + crypto->aid;
-
-               memcpy(key_entry.key, crypto->key,
-                      sizeof(key_entry.key));
-               memcpy(key_entry.tx_mic, crypto->tx_mic,
-                      sizeof(key_entry.tx_mic));
-               memcpy(key_entry.rx_mic, crypto->rx_mic,
-                      sizeof(key_entry.rx_mic));
-
-               offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-               rt2800_register_multiwrite(rt2x00dev, offset,
-                                             &key_entry, sizeof(key_entry));
-       }
-
-       /*
-        * Update WCID information
-        */
-       rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
-       return 0;
-}
-
-static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
-                                   const unsigned int filter_flags)
-{
-       u32 reg;
-
-       /*
-        * Start configuration steps.
-        * Note that the version error will always be dropped
-        * and broadcast frames will always be accepted since
-        * there is no filter for it at this time.
-        */
-       rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
-                          !(filter_flags & FIF_FCSFAIL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
-                          !(filter_flags & FIF_PLCPFAIL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
-                          !(filter_flags & FIF_PROMISC_IN_BSS));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
-                          !(filter_flags & FIF_ALLMULTI));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
-                          !(filter_flags & FIF_CONTROL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
-                          !(filter_flags & FIF_PSPOLL));
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
-       rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
-                          !(filter_flags & FIF_CONTROL));
-       rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-}
-
-static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
-                                 struct rt2x00_intf *intf,
-                                 struct rt2x00intf_conf *conf,
-                                 const unsigned int flags)
-{
-       unsigned int beacon_base;
-       u32 reg;
-
-       if (flags & CONFIG_UPDATE_TYPE) {
-               /*
-                * Clear current synchronisation setup.
-                * For the Beacon base registers we only need to clear
-                * the first byte since that byte contains the VALID and OWNER
-                * bits which (when set to 0) will invalidate the entire beacon.
-                */
-               beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-               rt2800_register_write(rt2x00dev, beacon_base, 0);
-
-               /*
-                * Enable synchronisation.
-                */
-               rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-               rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-               rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-               rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-               rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-       }
-
-       if (flags & CONFIG_UPDATE_MAC) {
-               reg = le32_to_cpu(conf->mac[1]);
-               rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-               conf->mac[1] = cpu_to_le32(reg);
-
-               rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-                                             conf->mac, sizeof(conf->mac));
-       }
-
-       if (flags & CONFIG_UPDATE_BSSID) {
-               reg = le32_to_cpu(conf->bssid[1]);
-               rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-               rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-               conf->bssid[1] = cpu_to_le32(reg);
-
-               rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-                                             conf->bssid, sizeof(conf->bssid));
-       }
-}
-
-static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
-                                struct rt2x00lib_erp *erp)
-{
-       u32 reg;
-
-       rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-       rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
-       rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-       rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
-                          !!erp->short_preamble);
-       rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
-                          !!erp->short_preamble);
-       rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-       rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
-                          erp->cts_protection ? 2 : 0);
-       rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-       rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-                                erp->basic_rates);
-       rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-       rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
-       rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-       rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-       rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
-       rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-       rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-
-       rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-       rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
-                          erp->beacon_int * 16);
-       rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-}
-
-static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
-                                struct antenna_setup *ant)
-{
-       u8 r1;
-       u8 r3;
-
-       rt2800_bbp_read(rt2x00dev, 1, &r1);
-       rt2800_bbp_read(rt2x00dev, 3, &r3);
-
-       /*
-        * Configure the TX antenna.
-        */
-       switch ((int)ant->tx) {
-       case 1:
-               rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-               break;
-       case 2:
-               rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-               break;
-       case 3:
-               /* Do nothing */
-               break;
-       }
-
-       /*
-        * Configure the RX antenna.
-        */
-       switch ((int)ant->rx) {
-       case 1:
-               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-               break;
-       case 2:
-               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-               break;
-       case 3:
-               rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-               break;
-       }
-
-       rt2800_bbp_write(rt2x00dev, 3, r3);
-       rt2800_bbp_write(rt2x00dev, 1, r1);
-}
-
-static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-                                     struct rt2x00lib_conf *libconf)
-{
-       u16 eeprom;
-       short lna_gain;
-
-       if (libconf->rf.channel <= 14) {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-       } else if (libconf->rf.channel <= 64) {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-       } else if (libconf->rf.channel <= 128) {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-       } else {
-               rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-               lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-       }
-
-       rt2x00dev->lna_gain = lna_gain;
-}
-
-static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-                                         struct ieee80211_conf *conf,
-                                         struct rf_channel *rf,
-                                         struct channel_info *info)
-{
-       rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-
-       if (rt2x00dev->default_ant.tx == 1)
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-
-       if (rt2x00dev->default_ant.rx == 1) {
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-       } else if (rt2x00dev->default_ant.rx == 2)
-               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-
-       if (rf->channel > 14) {
-               /*
-                * When TX power is below 0, we should increase it by 7 to
-                * make it a positive value (Minumum value is -7).
-                * However this means that values between 0 and 7 have
-                * double meaning, and we should set a 7DBm boost flag.
-                */
-               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-                                  (info->tx_power1 >= 0));
-
-               if (info->tx_power1 < 0)
-                       info->tx_power1 += 7;
-
-               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-                                  TXPOWER_A_TO_DEV(info->tx_power1));
-
-               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-                                  (info->tx_power2 >= 0));
-
-               if (info->tx_power2 < 0)
-                       info->tx_power2 += 7;
-
-               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-                                  TXPOWER_A_TO_DEV(info->tx_power2));
-       } else {
-               rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-                                  TXPOWER_G_TO_DEV(info->tx_power1));
-               rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-                                  TXPOWER_G_TO_DEV(info->tx_power2));
-       }
-
-       rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-
-       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
-       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
-       rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-
-       udelay(200);
-
-       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
-       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
-       rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-
-       udelay(200);
-
-       rt2800_rf_write(rt2x00dev, 1, rf->rf1);
-       rt2800_rf_write(rt2x00dev, 2, rf->rf2);
-       rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-       rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-}
-
-static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-                                         struct ieee80211_conf *conf,
-                                         struct rf_channel *rf,
-                                         struct channel_info *info)
-{
-       u8 rfcsr;
-
-       rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
-       rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3);
-
-       rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-       rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
-
-       rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-                         TXPOWER_G_TO_DEV(info->tx_power1));
-       rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
-
-       rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-       rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
-
-       rt2800_rfcsr_write(rt2x00dev, 24,
-                             rt2x00dev->calibration[conf_is_ht40(conf)]);
-
-       rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
-       rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-       rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
-}
-
-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
-                                    struct ieee80211_conf *conf,
-                                    struct rf_channel *rf,
-                                    struct channel_info *info)
-{
-       u32 reg;
-       unsigned int tx_pin;
-       u8 bbp;
-
-       if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-               rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
-       else
-               rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
-
-       /*
-        * Change BBP settings
-        */
-       rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-       rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-       rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-       rt2800_bbp_write(rt2x00dev, 86, 0);
-
-       if (rf->channel <= 14) {
-               if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-                       rt2800_bbp_write(rt2x00dev, 82, 0x62);
-                       rt2800_bbp_write(rt2x00dev, 75, 0x46);
-               } else {
-                       rt2800_bbp_write(rt2x00dev, 82, 0x84);
-                       rt2800_bbp_write(rt2x00dev, 75, 0x50);
-               }
-       } else {
-               rt2800_bbp_write(rt2x00dev, 82, 0xf2);
-
-               if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-                       rt2800_bbp_write(rt2x00dev, 75, 0x46);
-               else
-                       rt2800_bbp_write(rt2x00dev, 75, 0x50);
-       }
-
-       rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
-       rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-       rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
-       rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
-       rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
-
-       tx_pin = 0;
-
-       /* Turn on unused PA or LNA when not using 1T or 1R */
-       if (rt2x00dev->default_ant.tx != 1) {
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-       }
-
-       /* Turn on unused PA or LNA when not using 1T or 1R */
-       if (rt2x00dev->default_ant.rx != 1) {
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-               rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-       }
-
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-       rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-
-       rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-       rt2800_bbp_read(rt2x00dev, 4, &bbp);
-       rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-       rt2800_bbp_write(rt2x00dev, 4, bbp);
-
-       rt2800_bbp_read(rt2x00dev, 3, &bbp);
-       rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-       rt2800_bbp_write(rt2x00dev, 3, bbp);
-
-       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-               if (conf_is_ht40(conf)) {
-                       rt2800_bbp_write(rt2x00dev, 69, 0x1a);
-                       rt2800_bbp_write(rt2x00dev, 70, 0x0a);
-                       rt2800_bbp_write(rt2x00dev, 73, 0x16);
-               } else {
-                       rt2800_bbp_write(rt2x00dev, 69, 0x16);
-                       rt2800_bbp_write(rt2x00dev, 70, 0x08);
-                       rt2800_bbp_write(rt2x00dev, 73, 0x11);
-               }
-       }
-
-       msleep(1);
-}
-
-static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
-                                    const int txpower)
-{
-       u32 reg;
-       u32 value = TXPOWER_G_TO_DEV(txpower);
-       u8 r1;
-
-       rt2800_bbp_read(rt2x00dev, 1, &r1);
-       rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
-       rt2800_bbp_write(rt2x00dev, 1, r1);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
-       rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
-       rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-       rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-}
-
-static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-                                        struct rt2x00lib_conf *libconf)
-{
-       u32 reg;
-
-       rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
-                          libconf->conf->short_frame_max_tx_count);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
-                          libconf->conf->long_frame_max_tx_count);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
-       rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-       rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
-}
-
-static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
-                               struct rt2x00lib_conf *libconf)
-{
-       enum dev_state state =
-           (libconf->conf->flags & IEEE80211_CONF_PS) ?
-               STATE_SLEEP : STATE_AWAKE;
-       u32 reg;
-
-       if (state == STATE_SLEEP) {
-               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-
-               rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-                                  libconf->conf->listen_interval - 1);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-
-               rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-       } else {
-               rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
-               rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-               rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-               rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-       }
-}
-
-static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
-                            struct rt2x00lib_conf *libconf,
-                            const unsigned int flags)
-{
-       /* Always recalculate LNA gain before changing configuration */
-       rt2800usb_config_lna_gain(rt2x00dev, libconf);
-
-       if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-               rt2800usb_config_channel(rt2x00dev, libconf->conf,
-                                        &libconf->rf, &libconf->channel);
-       if (flags & IEEE80211_CONF_CHANGE_POWER)
-               rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
-       if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-               rt2800usb_config_retry_limit(rt2x00dev, libconf);
-       if (flags & IEEE80211_CONF_CHANGE_PS)
-               rt2800usb_config_ps(rt2x00dev, libconf);
-}
-
-/*
- * Link tuning
- */
-static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
-                                struct link_qual *qual)
-{
-       u32 reg;
-
-       /*
-        * Update FCS error count from register.
-        */
-       rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-       qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-}
-
-static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-{
-       if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
-               if (rt2x00_intf_is_usb(rt2x00dev) &&
-                   rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
-                       return 0x1c + (2 * rt2x00dev->lna_gain);
-               else
-                       return 0x2e + rt2x00dev->lna_gain;
-       }
-
-       if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-               return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-       else
-               return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-}
-
-static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
-                                    struct link_qual *qual, u8 vgc_level)
-{
-       if (qual->vgc_level != vgc_level) {
-               rt2800_bbp_write(rt2x00dev, 66, vgc_level);
-               qual->vgc_level = vgc_level;
-               qual->vgc_level_reg = vgc_level;
-       }
-}
-
-static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
-                                 struct link_qual *qual)
-{
-       rt2800usb_set_vgc(rt2x00dev, qual,
-                         rt2800usb_get_default_vgc(rt2x00dev));
-}
-
-static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
-                                struct link_qual *qual, const u32 count)
-{
-       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-               return;
-
-       /*
-        * When RSSI is better then -80 increase VGC level with 0x10
-        */
-       rt2800usb_set_vgc(rt2x00dev, qual,
-                         rt2800usb_get_default_vgc(rt2x00dev) +
-                         ((qual->rssi > -80) * 0x10));
-}
-
 /*
  * Firmware functions
  */
@@ -2205,9 +1379,9 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
         * Store led settings, for correct led behaviour.
         */
 #ifdef CONFIG_RT2X00_LIB_LEDS
-       rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-       rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-       rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+       rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+       rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+       rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
 
        rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
                           &rt2x00dev->led_mcu_reg);
@@ -2645,10 +1819,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
        .uninitialize           = rt2x00usb_uninitialize,
        .clear_entry            = rt2x00usb_clear_entry,
        .set_device_state       = rt2800usb_set_device_state,
-       .rfkill_poll            = rt2800usb_rfkill_poll,
-       .link_stats             = rt2800usb_link_stats,
-       .reset_tuner            = rt2800usb_reset_tuner,
-       .link_tuner             = rt2800usb_link_tuner,
+       .rfkill_poll            = rt2800_rfkill_poll,
+       .link_stats             = rt2800_link_stats,
+       .reset_tuner            = rt2800_reset_tuner,
+       .link_tuner             = rt2800_link_tuner,
        .write_tx_desc          = rt2800usb_write_tx_desc,
        .write_tx_data          = rt2x00usb_write_tx_data,
        .write_beacon           = rt2800usb_write_beacon,
@@ -2656,13 +1830,13 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
        .kick_tx_queue          = rt2800usb_kick_tx_queue,
        .kill_tx_queue          = rt2x00usb_kill_tx_queue,
        .fill_rxdone            = rt2800usb_fill_rxdone,
-       .config_shared_key      = rt2800usb_config_shared_key,
-       .config_pairwise_key    = rt2800usb_config_pairwise_key,
-       .config_filter          = rt2800usb_config_filter,
-       .config_intf            = rt2800usb_config_intf,
-       .config_erp             = rt2800usb_config_erp,
-       .config_ant             = rt2800usb_config_ant,
-       .config                 = rt2800usb_config,
+       .config_shared_key      = rt2800_config_shared_key,
+       .config_pairwise_key    = rt2800_config_pairwise_key,
+       .config_filter          = rt2800_config_filter,
+       .config_intf            = rt2800_config_intf,
+       .config_erp             = rt2800_config_erp,
+       .config_ant             = rt2800_config_ant,
+       .config                 = rt2800_config,
 };
 
 static const struct data_queue_desc rt2800usb_queue_rx = {
@@ -2699,7 +1873,7 @@ static const struct rt2x00_ops rt2800usb_ops = {
        .lib            = &rt2800usb_rt2x00_ops,
        .hw             = &rt2800usb_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-       .debugfs        = &rt2800usb_rt2x00debug,
+       .debugfs        = &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };