default 0x4000000 if SANDBOX
default 0x2000000 if ARCH_ROCKCHIP || ARCH_OMAP2PLUS || ARCH_MESON
default 0x200000 if ARCH_BMIPS || X86
- default 0x120000 if MACH_SUNIV
- default 0x220000 if MACH_SUN8I_V3S
- default 0x4020000 if ARCH_SUNXI
+ default 0x4020000 if SUNXI_MINIMUM_DRAM_MB >= 256
+ default 0x220000 if SUNXI_MINIMUM_DRAM_MB >= 64
+ default 0x120000 if SUNXI_MINIMUM_DRAM_MB >= 32
default 0x400000
help
This defines memory to be allocated for Dynamic allocation
dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-evb.dtb \
+ rk3399-eaidk-610.dtb \
rk3399-ficus.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
sun50i-h6-tanix-tx6.dtb \
sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_MACH_SUN50I_H616) += \
- sun50i-h616-orangepi-zero2.dtb
+ sun50i-h616-orangepi-zero2.dtb \
+ sun50i-h616-x96-mate.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-amarula-relic.dtb \
sun50i-a64-bananapi-m64.dtb \
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for RK3288 SoC thermal
- *
- * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-reserve_thermal: reserve_thermal {
- polling-delay-passive = <1000>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- /* sensor ID */
- thermal-sensors = <&tsadc 0>;
-
-};
-
-cpu_thermal: cpu_thermal {
- polling-delay-passive = <100>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- /* sensor ID */
- thermal-sensors = <&tsadc 1>;
- linux,hwmon;
-
- trips {
- cpu_alert0: cpu_alert0 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert1: cpu_alert1 {
- temperature = <75000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <100000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT 6>;
- };
- map1 {
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
-
-gpu_thermal: gpu_thermal {
- polling-delay-passive = <100>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- /* sensor ID */
- thermal-sensors = <&tsadc 2>;
- linux,hwmon;
-
- trips {
- gpu_alert0: gpu_alert0 {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- gpu_crit: gpu_crit {
- temperature = <100000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&gpu_alert0>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-};
};
};
- edp {
- edp_hpd: edp_hpd {
- rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
- };
- };
-
emmc {
/* Make sure eMMC is not in reset */
emmc_deassert_reset: emmc-deassert-reset {
status = "okay";
};
-&hdmi_audio {
- status = "okay";
-};
-
&gpu {
status = "okay";
};
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
spi2 = &spi2;
};
+ arm-pmu {
+ compatible = "arm,cortex-a12-pmu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x500>;
- operating-points = <
- /* KHz uV */
- 1800000 1400000
- 1704000 1350000
- 1608000 1300000
- 1512000 1250000
- 1416000 1200000
- 1200000 1100000
- 1008000 1050000
- 816000 1000000
- 696000 950000
- 600000 900000
- 408000 900000
- 216000 900000
- 126000 900000
- >;
+ resets = <&cru SRST_CORE0>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
- resets = <&cru SRST_CORE0>;
+ dynamic-power-coefficient = <370>;
};
- cpu@501 {
+ cpu1: cpu@501 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
};
- cpu@502 {
+ cpu2: cpu@502 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
};
- cpu@503 {
+ cpu3: cpu@503 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <370>;
+ };
+ };
+
+ cpu_opp_table: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-126000000 {
+ opp-hz = /bits/ 64 <126000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-216000000 {
+ opp-hz = /bits/ 64 <216000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-696000000 {
+ opp-hz = /bits/ 64 <696000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1200000>;
+ };
+ opp-1512000000 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt = <1300000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1350000>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * The rk3288 cannot use the memory area above 0xfe000000
+ * for dma operations for some reason. While there is
+ * probably a better solution available somewhere, we
+ * haven't found it yet and while devices with 2GB of ram
+ * are not affected, this issue prevents 4GB from booting.
+ * So to make these devices at least bootable, block
+ * this area for the time being until the real solution
+ * is found.
+ */
+ dma-unusable@fe000000 {
+ reg = <0xfe000000 0x1000000>;
};
};
};
timer {
- arm,use-physical-timer;
compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
- always-on;
+ arm,no-tick-in-suspend;
+ };
+
+ timer: timer@ff810000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0x0 0xff810000 0x0 0x20>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clock-names = "pclk", "timer";
};
display-subsystem {
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0c0000 0x4000>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0d0000 0x4000>;
+ resets = <&cru SRST_SDIO0>;
+ reset-names = "reset";
status = "disabled";
};
fifo-depth = <0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0e0000 0x4000>;
+ resets = <&cru SRST_SDIO1>;
+ reset-names = "reset";
status = "disabled";
};
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0f0000 0x4000>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC>;
+ reset-names = "saradc-apb";
status = "disabled";
};
pinctrl-0 = <&i2c5_xfer>;
status = "disabled";
};
+
uart0: serial@ff180000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff180000 0x100>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
status = "disabled";
reg-io-width = <4>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
status = "disabled";
pinctrl-0 = <&uart2_xfer>;
status = "disabled";
};
+
uart3: serial@ff1b0000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff1b0000 0x100>;
reg-io-width = <4>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
status = "disabled";
reg-io-width = <4>;
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart4_xfer>;
status = "disabled";
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- broken-no-flushp;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC2>;
clock-names = "apb_pclk";
};
thermal: thermal-zones {
- #include "rk3288-thermal.dtsi"
+ reserve_thermal: reserve-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 0>;
+ };
+
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 6>,
+ <&cpu1 THERMAL_NO_LIMIT 6>,
+ <&cpu2 THERMAL_NO_LIMIT 6>,
+ <&cpu3 THERMAL_NO_LIMIT 6>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ gpu_alert0: gpu_alert0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
};
tsadc: tsadc@ff280000 {
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
+ resets = <&cru SRST_MAC>;
+ reset-names = "stmmaceth";
};
usb_host0_ehci: usb@ff500000 {
status = "disabled";
};
- /* NOTE: doesn't work on RK3288, but fixed on RK3288W */
+ /* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
usb_host0_ohci: usb@ff520000 {
compatible = "generic-ohci";
reg = <0x0 0xff520000 0x0 0x100>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
+ dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
+ snps,reset-phy-on-wake;
status = "disabled";
};
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- broken-no-flushp;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC1>;
clock-names = "apb_pclk";
status = "disabled";
status = "disabled";
};
- bus_intmem: bus_intmem@ff700000 {
+ bus_intmem: sram@ff700000 {
compatible = "mmio-sram";
reg = <0xff700000 0x18000>;
#address-cells = <1>;
};
};
- sram@ff720000 {
+ pmu_sram: sram@ff720000 {
compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
reg = <0xff720000 0x1000>;
};
compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
reg = <0xff800000 0x100>;
clocks = <&cru PCLK_WDT>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
reg = <0xff8b0000 0x10000>;
#sound-dai-cells = <0>;
- clock-names = "hclk", "mclk";
- clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+ clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+ clock-names = "mclk", "hclk";
dmas = <&dmac_bus_s 3>;
dma-names = "tx";
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx>;
rockchip,grf = <&grf>;
i2s: i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+ clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
dma-names = "tx", "rx";
- clock-names = "i2s_hclk", "i2s_clk";
- clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
+ status = "disabled";
+ };
+
+ crypto: crypto@ff8a0000 {
+ compatible = "rockchip,rk3288-crypto";
+ reg = <0xff8a0000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+ <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+ clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+ resets = <&cru SRST_CRYPTO>;
+ reset-names = "crypto-rst";
+ };
+
+ iep_mmu: iommu@ff900800 {
+ compatible = "rockchip,iommu";
+ reg = <0xff900800 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
status = "disabled";
};
+ isp_mmu: iommu@ff914000 {
+ compatible = "rockchip,iommu";
+ reg = <0xff914000 0x100>, <0xff915000 0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ rockchip,disable-mmu-reset;
+ status = "disabled";
+ };
+
+ rga: rga@ff920000 {
+ compatible = "rockchip,rk3288-rga";
+ reg = <0xff920000 0x180>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+ clock-names = "aclk", "hclk", "sclk";
+ power-domains = <&power RK3288_PD_VIO>;
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
+ reset-names = "core", "axi", "ahb";
+ };
+
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0xff930000 0x19c>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
- power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
vopb_out_edp: endpoint@0 {
reg = <0>;
remote-endpoint = <&edp_in_vopb>;
};
+
vopb_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_vopb>;
};
+
vopb_out_lvds: endpoint@2 {
reg = <2>;
remote-endpoint = <&lvds_in_vopb>;
};
+
vopb_out_mipi: endpoint@3 {
reg = <3>;
remote-endpoint = <&mipi_in_vopb>;
};
-
};
};
compatible = "rockchip,iommu";
reg = <0xff930300 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
- power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
vopl_out_edp: endpoint@0 {
reg = <0>;
remote-endpoint = <&edp_in_vopl>;
};
+
vopl_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_vopl>;
};
+
vopl_out_lvds: endpoint@2 {
reg = <2>;
remote-endpoint = <&lvds_in_vopl>;
};
+
vopl_out_mipi: endpoint@3 {
reg = <3>;
remote-endpoint = <&mipi_in_vopl>;
};
-
};
};
compatible = "rockchip,iommu";
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
mipi_dsi: mipi@ff960000 {
compatible = "rockchip,rk3288_mipi_dsi";
reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_MIPI_DSI0>;
clock-names = "pclk_mipi";
- /*pinctrl-names = "default";
- pinctrl-0 = <&lcdc0_ctl>;*/
+ power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
+
ports {
- reg = <1>;
mipi_in: port {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cru PCLK_LVDS_PHY>;
clock-names = "pclk_lvds";
pinctrl-names = "default";
- pinctrl-0 = <&lcdc0_ctl>;
+ pinctrl-0 = <&lcdc_ctl>;
+ power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
+
lvds_in: port@0 {
reg = <0>;
+
#address-cells = <1>;
#size-cells = <0>;
+
lvds_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_lvds>;
reg = <0xff970000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>;
- rockchip,grf = <&grf>;
clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
- resets = <&cru 111>;
+ resets = <&cru SRST_EDP>;
reset-names = "edp";
+ rockchip,grf = <&grf>;
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
ports {
edp_in: port {
#address-cells = <1>;
compatible = "rockchip,rk3288-dw-hdmi";
reg = <0xff980000 0x20000>;
reg-io-width = <4>;
- ddc-i2c-bus = <&i2c5>;
+ #sound-dai-cells = <0>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
+ power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
ports {
hdmi_in: port {
#address-cells = <1>;
};
};
- hdmi_audio: hdmi_audio {
- compatible = "rockchip,rk3288-hdmi-audio";
- i2s-controller = <&i2s>;
- status = "disable";
- };
-
vpu: video-codec@ff9a0000 {
compatible = "rockchip,rk3288-vpu";
reg = <0xff9a0000 0x800>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu", "vdpu";
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
- clock-names = "aclk_vcodec", "hclk_vcodec";
- power-domains = <&power RK3288_PD_VIDEO>;
+ clock-names = "aclk", "hclk";
iommus = <&vpu_mmu>;
+ power-domains = <&power RK3288_PD_VIDEO>;
};
vpu_mmu: iommu@ff9a0800 {
compatible = "rockchip,iommu";
reg = <0xff9a0800 0x100>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
power-domains = <&power RK3288_PD_VIDEO>;
+ };
+
+ hevc_mmu: iommu@ff9c0440 {
+ compatible = "rockchip,iommu";
+ reg = <0xff9c0440 0x40>, <0xff9c0480 0x40>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
+ status = "disabled";
};
gpu: gpu@ffa30000 {
- compatible = "arm,malit764",
- "arm,malit76x",
- "arm,malit7xx",
- "arm,mali-midgard";
+ compatible = "rockchip,rk3288-mali", "arm,mali-t760";
reg = <0xffa30000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "JOB", "MMU", "GPU";
+ interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
- clock-names = "aclk_gpu";
- operating-points = <
- /* KHz uV */
- 100000 950000
- 200000 950000
- 300000 1000000
- 400000 1100000
- /* 500000 1200000 - See crosbug.com/p/33857 */
- 600000 1250000
- >;
+ operating-points-v2 = <&gpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
power-domains = <&power RK3288_PD_GPU>;
status = "disabled";
};
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1250000>;
+ };
+ };
+
+ qos_gpu_r: qos@ffaa0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaa0000 0x20>;
+ };
+
+ qos_gpu_w: qos@ffaa0080 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaa0080 0x20>;
+ };
+
+ qos_vio1_vop: qos@ffad0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0000 0x20>;
+ };
+
+ qos_vio1_isp_w0: qos@ffad0100 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0100 0x20>;
+ };
+
+ qos_vio1_isp_w1: qos@ffad0180 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0x0 0xffad0180 0x0 0x20>;
+ };
+
+ qos_vio0_vop: qos@ffad0400 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0x0 0xffad0400 0x0 0x20>;
+ };
+
+ qos_vio0_vip: qos@ffad0480 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0480 0x20>;
+ };
+
+ qos_vio0_iep: qos@ffad0500 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0500 0x20>;
+ };
+
+ qos_vio2_rga_r: qos@ffad0800 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0800 0x20>;
+ };
+
+ qos_vio2_rga_w: qos@ffad0880 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0880 0x20>;
+ };
+
+ qos_vio1_isp_r: qos@ffad0900 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0900 0x20>;
+ };
+
+ qos_video: qos@ffae0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffae0000 0x20>;
+ };
+
+ qos_hevc_r: qos@ffaf0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaf0000 0x20>;
+ };
+
+ qos_hevc_w: qos@ffaf0080 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaf0080 0x20>;
+ };
+
dmac_bus_s: dma-controller@ffb20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xffb20000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- broken-no-flushp;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC1>;
clock-names = "apb_pclk";
};
efuse: efuse@ffb40000 {
compatible = "rockchip,rk3288-efuse";
reg = <0xffb40000 0x10000>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE256>;
+ clock-names = "pclk_efuse";
+
+ cpu_id: cpu-id@7 {
+ reg = <0x07 0x10>;
+ };
+ cpu_leakage: cpu_leakage@17 {
+ reg = <0x17 0x1>;
+ };
};
gic: interrupt-controller@ffc01000 {
gpio0: gpio0@ff750000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff750000 0x100>;
+ reg = <0xff750000 0x100>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
hdmi_cec_c0: hdmi-cec-c0 {
rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
};
+
+ hdmi_cec_c7: hdmi-cec-c7 {
+ rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>;
+ };
+
+ hdmi_ddc: hdmi-ddc {
+ rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
+ <7 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ hdmi_ddc_unwedge: hdmi-ddc-unwedge {
+ rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
+ <7 RK_PC4 2 &pcfg_pull_none>;
+ };
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
};
pcfg_pull_up: pcfg-pull-up {
drive-strength = <12>;
};
- sleep {
+ suspend {
global_pwroff: global-pwroff {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
};
};
};
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>,
};
};
- lcdc0 {
- lcdc0_ctl: lcdc0-ctl {
+ lcdc {
+ lcdc_ctl: lcdc-ctl {
rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
<1 RK_PD1 1 &pcfg_pull_none>,
<1 RK_PD2 1 &pcfg_pull_none>,
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>;
};
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>;
};
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 RK_PC2 1 &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 RK_PB2 1 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 RK_PB1 1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
uart4 {
uart4_xfer: uart4-xfer {
- rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>,
- <5 RK_PB5 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>,
+ <5 RK_PB6 3 &pcfg_pull_none>;
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 RK_PB6 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
- rockchip,pins = <5 RK_PB7 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>;
};
};
tsadc {
+ otp_pin: otp-pin {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
otp_out: otp-out {
rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>;
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2022 Andy Yan <andy.yan@gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1600.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+ };
+};
+
+&vdd_log {
+ regulator-init-microvolt = <950000>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "OPEN AI LAB EAIDK-610";
+ compatible = "openailab,eaidk-610", "rockchip,rk3399";
+
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ key-power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_pin>, <&user_led_pin>,
+ <&heartbeat_led_pin>, <&wlan_active_led_pin>,
+ <&bt_active_led_pin>;
+
+ work_led: led-0 {
+ label = "blue:work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+
+ user_led: led-1 {
+ label = "read:user";
+ default-state = "off";
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ };
+
+ heartbeat_led: led-2 {
+ label = "green:heartbeat";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan_active_led: led-3 {
+ label = "yellow:wlan";
+ gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led: led-4 {
+ label = "blue:bt";
+ gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ rt5651-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "realtek,rt5651-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&rt5651>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ /* For USB3.0 Port1/2 */
+ vcc5v0_host1: vcc5v0-host1-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host1_en>;
+ regulator-name = "vcc5v0_host1";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* For USB2.0 Port1/2 */
+ vcc5v0_host3: vcc5v0-host3-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host3_en>;
+ regulator-name = "vcc5v0_host3";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_pin>;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_pin>;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ rt5651: audio-codec@1a {
+ compatible = "rockchip,rt5651";
+ reg = <0x1a>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+ spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_role_sw: endpoint@0 {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+ };
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc_hs: endpoint {
+ remote-endpoint = <&u2phy0_typec_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc_ss: endpoint {
+ remote-endpoint = <&tcphy0_typec_ss>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcca1v8_codec>;
+ bt656-supply = <&vcc_3v0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+
+ pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_pin: work-led-pin {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ user_led_pin: user-led-pin {
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ heartbeat_led_pin: heartbeat-led-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wlan_active_led_pin: wlan-led-pin {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_active_led_pin: bt-led-pin {
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_pin: vsel1-pin {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_pin: vsel2-pin {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ rt5651 {
+ rt5651_hpcon: rt5640-hpcon {
+ rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host3_en: vcc5v0-host3-en {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_host1_en: vcc5v0-host1-en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdio0 {
+ /* WiFi & BT combo module AMPAK AP6255 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy0_usb3 {
+ orientation-switch;
+ port {
+ tcphy0_typec_ss: endpoint {
+ remote-endpoint = <&usbc_ss>;
+ };
+ };
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host3>;
+ status = "okay";
+ };
+
+ port {
+ u2phy0_typec_hs: endpoint {
+ remote-endpoint = <&usbc_hs>;
+ };
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host3>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ usb-role-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
/ {
config {
- u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+ u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */
u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
spi5 = &spi5;
};
- /*
- * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
- * eMMC and SPI flash powered-down initially (in fact it keeps the
- * reset signal asserted). Even though it is an enable signal, we
- * model this as a regulator.
- */
- bios_enable: bios_enable {
- compatible = "regulator-fixed";
- u-boot,dm-pre-reloc;
- regulator-name = "bios_enable";
- enable-active-high;
- gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
};
};
+&binman {
+ simple-bin {
+ blob {
+ offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
+ };
+ };
+
+#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
+ simple-bin-spi {
+ blob {
+ /* same as u-boot,spl-payload-offset */
+ offset = <0x80000>;
+ };
+ };
+#endif
+};
+
&gpio1 {
u-boot,dm-pre-reloc;
};
&gpio3 {
u-boot,dm-pre-reloc;
+
+ /*
+ * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+ * eMMC and SPI flash powered-down initially (in fact it keeps the
+ * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable
+ * eMMC and SPI after the SPL has been booted from SD Card.
+ */
+ bios_disable_override {
+ u-boot,dm-pre-reloc;
+ gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "bios_disable_override";
+ gpio-hog;
+ };
+};
+
+&gpio4 {
+ u-boot,dm-pre-reloc;
};
&norflash {
u-boot,dm-pre-reloc;
};
+
+&pcfg_pull_none {
+ u-boot,dm-pre-reloc;
+};
+
+&pcfg_pull_up {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_bus4 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_clk {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_cmd {
+ u-boot,dm-pre-reloc;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x.dtsi"
+
+/ {
+ compatible = "rockchip,rk3566";
+};
+
+&pipegrf {
+ compatible = "rockchip,rk3566-pipe-grf", "syscon";
+};
+
+&power {
+ power-domain@RK3568_PD_PIPE {
+ reg = <RK3568_PD_PIPE>;
+ clocks = <&cru PCLK_PIPE>;
+ pm_qos = <&qos_pcie2x1>,
+ <&qos_sata1>,
+ <&qos_sata2>,
+ <&qos_usb3_0>,
+ <&qos_usb3_1>;
+ #power-domain-cells = <0>;
+ };
+};
+
+&usb_host0_xhci {
+ phys = <&usb2phy0_otg>;
+ phy-names = "usb2-phy";
+ extcon = <&usb2phy0>;
+ maximum-speed = "high-speed";
+};
+
+&vop {
+ compatible = "rockchip,rk3566-vop";
+};
* (C) Copyright 2021 Rockchip Electronics Co., Ltd
*/
-#include "rk3568-u-boot.dtsi"
+#include "rk356x-u-boot.dtsi"
/ {
chosen {
<4 RK_PA0 3 &pcfg_pull_none_drv_level_2>;
};
};
+
+ tsadc {
+ /omit-if-no-ref/
+ tsadc_pin: tsadc-pin {
+ rockchip,pins =
+ /* tsadc_pin */
+ <0 RK_PA1 0 &pcfg_pull_none>;
+ };
+ };
};
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
*/
-#include <dt-bindings/clock/rk3568-cru.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/soc/rockchip,boot-mode.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "rk356x.dtsi"
/ {
compatible = "rockchip,rk3568";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- gpio4 = &gpio4;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- serial6 = &uart6;
- serial7 = &uart7;
- serial8 = &uart8;
- serial9 = &uart9;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x0>;
- clocks = <&scmi_clk 0>;
- enable-method = "psci";
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu1: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x100>;
- enable-method = "psci";
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu2: cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x200>;
- enable-method = "psci";
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu3: cpu@300 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0 0x300>;
- enable-method = "psci";
- operating-points-v2 = <&cpu0_opp_table>;
- };
- };
-
- cpu0_opp_table: cpu0-opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-408000000 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <900000 900000 1150000>;
- clock-latency-ns = <40000>;
- };
-
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <900000 900000 1150000>;
- };
-
- opp-816000000 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <900000 900000 1150000>;
- opp-suspend;
- };
-
- opp-1104000000 {
- opp-hz = /bits/ 64 <1104000000>;
- opp-microvolt = <900000 900000 1150000>;
- };
-
- opp-1416000000 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <900000 900000 1150000>;
- };
-
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <975000 975000 1150000>;
- };
-
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1050000 1050000 1150000>;
- };
-
- opp-1992000000 {
- opp-hz = /bits/ 64 <1992000000>;
- opp-microvolt = <1150000 1150000 1150000>;
- };
- };
-
- firmware {
- scmi: scmi {
- compatible = "arm,scmi-smc";
- arm,smc-id = <0x82000010>;
- shmem = <&scmi_shmem>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- scmi_clk: protocol@14 {
- reg = <0x14>;
- #clock-cells = <1>;
- };
- };
-
- };
-
- pmu {
- compatible = "arm,cortex-a55-pmu";
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
- arm,no-tick-in-suspend;
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xin24m";
- #clock-cells = <0>;
- };
-
- xin32k: xin32k {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- pinctrl-0 = <&clk32k_out0>;
- pinctrl-names = "default";
- #clock-cells = <0>;
- };
-
- sram@10f000 {
- compatible = "mmio-sram";
- reg = <0x0 0x0010f000 0x0 0x100>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0x0010f000 0x100>;
-
- scmi_shmem: sram@0 {
- compatible = "arm,scmi-shmem";
- reg = <0x0 0x100>;
- };
- };
-
- gic: interrupt-controller@fd400000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
- <0x0 0xfd460000 0 0x80000>; /* GICR */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <3>;
- mbi-alias = <0x0 0xfd100000>;
- mbi-ranges = <296 24>;
- msi-controller;
- };
-
- pmugrf: syscon@fdc20000 {
- compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
- reg = <0x0 0xfdc20000 0x0 0x10000>;
- };
-
- grf: syscon@fdc60000 {
- compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfdc60000 0x0 0x10000>;
- };
-
- pmucru: clock-controller@fdd00000 {
- compatible = "rockchip,rk3568-pmucru";
- reg = <0x0 0xfdd00000 0x0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- cru: clock-controller@fdd20000 {
- compatible = "rockchip,rk3568-cru";
- reg = <0x0 0xfdd20000 0x0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- i2c0: i2c@fdd40000 {
- compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfdd40000 0x0 0x1000>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
+ sata0: sata@fc000000 {
+ compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfc000000 0 0x1000>;
+ clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
+ <&cru CLK_SATA0_RXOOB>;
+ clock-names = "sata", "pmalive", "rxoob";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&combphy0 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&power RK3568_PD_PIPE>;
status = "disabled";
};
- uart0: serial@fdd50000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfdd50000 0x0 0x100>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 0>, <&dmac0 1>;
- pinctrl-0 = <&uart0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
+ pipe_phy_grf0: syscon@fdc70000 {
+ compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfdc70000 0x0 0x1000>;
};
- pwm0: pwm@fdd70000 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfdd70000 0x0 0x10>;
- clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm0m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
+ qos_pcie3x1: qos@fe190080 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190080 0x0 0x20>;
};
- pwm1: pwm@fdd70010 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfdd70010 0x0 0x10>;
- clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm1m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
+ qos_pcie3x2: qos@fe190100 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190100 0x0 0x20>;
};
- pwm2: pwm@fdd70020 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfdd70020 0x0 0x10>;
- clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm2m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
+ qos_sata0: qos@fe190200 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190200 0x0 0x20>;
};
- pwm3: pwm@fdd70030 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfdd70030 0x0 0x10>;
- clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm3_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- sdmmc2: mmc@fe000000 {
- compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe000000 0x0 0x4000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
- <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- max-frequency = <150000000>;
- resets = <&cru SRST_SDMMC2>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdmmc0: mmc@fe2b0000 {
- compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe2b0000 0x0 0x4000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
- <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- max-frequency = <150000000>;
- resets = <&cru SRST_SDMMC0>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdmmc1: mmc@fe2c0000 {
- compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe2c0000 0x0 0x4000>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
- <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- max-frequency = <150000000>;
- resets = <&cru SRST_SDMMC1>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdhci: mmc@fe310000 {
- compatible = "rockchip,rk3568-dwcmshc";
- reg = <0x0 0xfe310000 0x0 0x10000>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
- assigned-clock-rates = <200000000>, <24000000>;
- clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
- <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
- <&cru TCLK_EMMC>;
- clock-names = "core", "bus", "axi", "block", "timer";
- status = "disabled";
- };
-
- dmac0: dmac@fe530000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xfe530000 0x0 0x4000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_BUS>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- dmac1: dmac@fe550000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xfe550000 0x0 0x4000>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_BUS>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- i2c1: i2c@fe5a0000 {
- compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfe5a0000 0x0 0x1000>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c1_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@fe5b0000 {
- compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfe5b0000 0x0 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c2m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@fe5c0000 {
- compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfe5c0000 0x0 0x1000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c3m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c4: i2c@fe5d0000 {
- compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfe5d0000 0x0 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c4m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c5: i2c@fe5e0000 {
- compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfe5e0000 0x0 0x1000>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c5m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- wdt: watchdog@fe600000 {
- compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
- reg = <0x0 0xfe600000 0x0 0x100>;
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
- clock-names = "tclk", "pclk";
- };
-
- uart1: serial@fe650000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe650000 0x0 0x100>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 2>, <&dmac0 3>;
- pinctrl-0 = <&uart1m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart2: serial@fe660000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe660000 0x0 0x100>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 4>, <&dmac0 5>;
- pinctrl-0 = <&uart2m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart3: serial@fe670000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe670000 0x0 0x100>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 6>, <&dmac0 7>;
- pinctrl-0 = <&uart3m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart4: serial@fe680000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe680000 0x0 0x100>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 8>, <&dmac0 9>;
- pinctrl-0 = <&uart4m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart5: serial@fe690000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe690000 0x0 0x100>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 10>, <&dmac0 11>;
- pinctrl-0 = <&uart5m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart6: serial@fe6a0000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe6a0000 0x0 0x100>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 12>, <&dmac0 13>;
- pinctrl-0 = <&uart6m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart7: serial@fe6b0000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe6b0000 0x0 0x100>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 14>, <&dmac0 15>;
- pinctrl-0 = <&uart7m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart8: serial@fe6c0000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe6c0000 0x0 0x100>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 16>, <&dmac0 17>;
- pinctrl-0 = <&uart8m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart9: serial@fe6d0000 {
- compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfe6d0000 0x0 0x100>;
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 18>, <&dmac0 19>;
- pinctrl-0 = <&uart9m0_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- pwm4: pwm@fe6e0000 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6e0000 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm4_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm5: pwm@fe6e0010 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6e0010 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm5_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm6: pwm@fe6e0020 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6e0020 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm6_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm7: pwm@fe6e0030 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6e0030 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm7_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
+ gmac0: ethernet@fe2a0000 {
+ compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe2a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>,
+ <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>,
+ <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>,
+ <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_refout",
+ "aclk_mac", "pclk_mac",
+ "clk_mac_speed", "ptp_ref";
+ resets = <&cru SRST_A_GMAC0>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,tso;
status = "disabled";
- };
- pwm8: pwm@fe6f0000 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6f0000 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm8m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
- pwm9: pwm@fe6f0010 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6f0010 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm9m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <8>;
+ snps,wr_osr_lmt = <4>;
+ };
- pwm10: pwm@fe6f0020 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6f0020 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm10m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
- pwm11: pwm@fe6f0030 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe6f0030 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm11m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
};
- pwm12: pwm@fe700000 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe700000 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm12m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
+ combphy0: phy@fe820000 {
+ compatible = "rockchip,rk3568-naneng-combphy";
+ reg = <0x0 0xfe820000 0x0 0x100>;
+ clocks = <&pmucru CLK_PCIEPHY0_REF>,
+ <&cru PCLK_PIPEPHY0>,
+ <&cru PCLK_PIPE>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_PIPEPHY0>;
+ rockchip,pipe-grf = <&pipegrf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+ #phy-cells = <1>;
status = "disabled";
};
+};
- pwm13: pwm@fe700010 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe700010 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm13m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
+&cpu0_opp_table {
+ opp-1992000000 {
+ opp-hz = /bits/ 64 <1992000000>;
+ opp-microvolt = <1150000 1150000 1150000>;
};
+};
- pwm14: pwm@fe700020 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe700020 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm14m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
- };
+&pipegrf {
+ compatible = "rockchip,rk3568-pipe-grf", "syscon";
+};
- pwm15: pwm@fe700030 {
- compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfe700030 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm15m0_pins>;
- pinctrl-names = "active";
- #pwm-cells = <3>;
- status = "disabled";
+&power {
+ power-domain@RK3568_PD_PIPE {
+ reg = <RK3568_PD_PIPE>;
+ clocks = <&cru PCLK_PIPE>;
+ pm_qos = <&qos_pcie2x1>,
+ <&qos_pcie3x1>,
+ <&qos_pcie3x2>,
+ <&qos_sata0>,
+ <&qos_sata1>,
+ <&qos_sata2>,
+ <&qos_usb3_0>,
+ <&qos_usb3_1>;
+ #power-domain-cells = <0>;
};
+};
- pinctrl: pinctrl {
- compatible = "rockchip,rk3568-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmugrf>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio0: gpio@fdd60000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfdd60000 0x0 0x100>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@fe740000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfe740000 0x0 0x100>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@fe750000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfe750000 0x0 0x100>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@fe760000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfe760000 0x0 0x100>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@fe770000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfe770000 0x0 0x100>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
+&usb_host0_xhci {
+ phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
};
-#include "rk3568-pinctrl.dtsi"
+&vop {
+ compatible = "rockchip,rk3568-vop";
+};
status = "okay";
};
-&sdmmc0 {
+&sdhci {
u-boot,dm-spl;
status = "okay";
};
-&sdhci {
- bus-width = <8>;
+&sdmmc0 {
u-boot,dm-spl;
- mmc-hs200-1_8v;
status = "okay";
};
-
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3568-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
+ serial8 = &uart8;
+ serial9 = &uart9;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ clocks = <&scmi_clk 0>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ clock-latency-ns = <40000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ opp-suspend;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ };
+
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <975000 975000 1150000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1050000 1050000 1150000>;
+ };
+ };
+
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
+ firmware {
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0x82000010>;
+ shmem = <&scmi_shmem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <825000>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <825000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <825000>;
+ };
+
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <900000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ };
+ };
+
+ hdmi_sound: hdmi-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "HDMI";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ status = "disabled";
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ arm,no-tick-in-suspend;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ pinctrl-0 = <&clk32k_out0>;
+ pinctrl-names = "default";
+ #clock-cells = <0>;
+ };
+
+ sram@10f000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x0010f000 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x0010f000 0x100>;
+
+ scmi_shmem: sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x100>;
+ };
+ };
+
+ sata1: sata@fc400000 {
+ compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfc400000 0 0x1000>;
+ clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
+ <&cru CLK_SATA1_RXOOB>;
+ clock-names = "sata", "pmalive", "rxoob";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&combphy1 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&power RK3568_PD_PIPE>;
+ status = "disabled";
+ };
+
+ sata2: sata@fc800000 {
+ compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfc800000 0 0x1000>;
+ clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
+ <&cru CLK_SATA2_RXOOB>;
+ clock-names = "sata", "pmalive", "rxoob";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&combphy2 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&power RK3568_PD_PIPE>;
+ status = "disabled";
+ };
+
+ usb_host0_xhci: usb@fcc00000 {
+ compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+ reg = <0x0 0xfcc00000 0x0 0x400000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ power-domains = <&power RK3568_PD_PIPE>;
+ resets = <&cru SRST_USB3OTG0>;
+ snps,dis_u2_susphy_quirk;
+ status = "disabled";
+ };
+
+ usb_host1_xhci: usb@fd000000 {
+ compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+ reg = <0x0 0xfd000000 0x0 0x400000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "host";
+ phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ power-domains = <&power RK3568_PD_PIPE>;
+ resets = <&cru SRST_USB3OTG1>;
+ snps,dis_u2_susphy_quirk;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@fd400000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
+ <0x0 0xfd460000 0 0x80000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ mbi-alias = <0x0 0xfd410000>;
+ mbi-ranges = <296 24>;
+ msi-controller;
+ };
+
+ usb_host0_ehci: usb@fd800000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd800000 0x0 0x40000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&usb2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fd840000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd840000 0x0 0x40000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&usb2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fd880000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd880000 0x0 0x40000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&usb2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fd8c0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd8c0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&usb2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ pmugrf: syscon@fdc20000 {
+ compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xfdc20000 0x0 0x10000>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,rk3568-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ pipegrf: syscon@fdc50000 {
+ reg = <0x0 0xfdc50000 0x0 0x1000>;
+ };
+
+ grf: syscon@fdc60000 {
+ compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xfdc60000 0x0 0x10000>;
+ };
+
+ pipe_phy_grf1: syscon@fdc80000 {
+ compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfdc80000 0x0 0x1000>;
+ };
+
+ pipe_phy_grf2: syscon@fdc90000 {
+ compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfdc90000 0x0 0x1000>;
+ };
+
+ usb2phy0_grf: syscon@fdca0000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca0000 0x0 0x8000>;
+ };
+
+ usb2phy1_grf: syscon@fdca8000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca8000 0x0 0x8000>;
+ };
+
+ pmucru: clock-controller@fdd00000 {
+ compatible = "rockchip,rk3568-pmucru";
+ reg = <0x0 0xfdd00000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@fdd20000 {
+ compatible = "rockchip,rk3568-cru";
+ reg = <0x0 0xfdd20000 0x0 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
+ assigned-clock-rates = <1200000000>, <200000000>;
+ rockchip,grf = <&grf>;
+ };
+
+ i2c0: i2c@fdd40000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfdd40000 0x0 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@fdd50000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfdd50000 0x0 0x100>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 0>, <&dmac0 1>;
+ pinctrl-0 = <&uart0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@fdd70000 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfdd70000 0x0 0x10>;
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm0m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@fdd70010 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfdd70010 0x0 0x10>;
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm1m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@fdd70020 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfdd70020 0x0 0x10>;
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm2m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@fdd70030 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfdd70030 0x0 0x10>;
+ clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pmu: power-management@fdd90000 {
+ compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xfdd90000 0x0 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3568-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_GPU */
+ power-domain@RK3568_PD_GPU {
+ reg = <RK3568_PD_GPU>;
+ clocks = <&cru ACLK_GPU_PRE>,
+ <&cru PCLK_GPU_PRE>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+
+ /* These power domains are grouped by VD_LOGIC */
+ power-domain@RK3568_PD_VI {
+ reg = <RK3568_PD_VI>;
+ clocks = <&cru HCLK_VI>,
+ <&cru PCLK_VI>;
+ pm_qos = <&qos_isp>,
+ <&qos_vicap0>,
+ <&qos_vicap1>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3568_PD_VO {
+ reg = <RK3568_PD_VO>;
+ clocks = <&cru HCLK_VO>,
+ <&cru PCLK_VO>,
+ <&cru ACLK_VOP_PRE>;
+ pm_qos = <&qos_hdcp>,
+ <&qos_vop_m0>,
+ <&qos_vop_m1>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3568_PD_RGA {
+ reg = <RK3568_PD_RGA>;
+ clocks = <&cru HCLK_RGA_PRE>,
+ <&cru PCLK_RGA_PRE>;
+ pm_qos = <&qos_ebc>,
+ <&qos_iep>,
+ <&qos_jpeg_dec>,
+ <&qos_jpeg_enc>,
+ <&qos_rga_rd>,
+ <&qos_rga_wr>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3568_PD_VPU {
+ reg = <RK3568_PD_VPU>;
+ clocks = <&cru HCLK_VPU_PRE>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3568_PD_RKVDEC {
+ clocks = <&cru HCLK_RKVDEC_PRE>;
+ reg = <RK3568_PD_RKVDEC>;
+ pm_qos = <&qos_rkvdec>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3568_PD_RKVENC {
+ reg = <RK3568_PD_RKVENC>;
+ clocks = <&cru HCLK_RKVENC_PRE>;
+ pm_qos = <&qos_rkvenc_rd_m0>,
+ <&qos_rkvenc_rd_m1>,
+ <&qos_rkvenc_wr_m0>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ gpu: gpu@fde60000 {
+ compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
+ reg = <0x0 0xfde60000 0x0 0x4000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
+ clock-names = "gpu", "bus";
+ #cooling-cells = <2>;
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&power RK3568_PD_GPU>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@fe000000 {
+ compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
+ <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMC2>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@fe010000 {
+ compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe010000 0x0 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>,
+ <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>,
+ <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>,
+ <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_refout",
+ "aclk_mac", "pclk_mac",
+ "clk_mac_speed", "ptp_ref";
+ resets = <&cru SRST_A_GMAC1>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ snps,axi-config = <&gmac1_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+ snps,tso;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac1_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <8>;
+ snps,wr_osr_lmt = <4>;
+ };
+
+ gmac1_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac1_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+ };
+
+ vop: vop@fe040000 {
+ reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+ reg-names = "vop", "gamma-lut";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+ clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3568_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ vp1: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ vp2: port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fe043e00 {
+ compatible = "rockchip,rk3568-iommu";
+ reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ hdmi: hdmi@fe0a0000 {
+ compatible = "rockchip,rk3568-dw-hdmi";
+ reg = <0x0 0xfe0a0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_HOST>,
+ <&cru CLK_HDMI_SFR>,
+ <&cru CLK_HDMI_CEC>,
+ <&pmucru CLK_HDMI_REF>,
+ <&cru HCLK_VO>;
+ clock-names = "iahb", "isfr", "cec", "ref";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+ power-domains = <&power RK3568_PD_VO>;
+ reg-io-width = <4>;
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ qos_gpu: qos@fe128000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe128000 0x0 0x20>;
+ };
+
+ qos_rkvenc_rd_m0: qos@fe138080 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe138080 0x0 0x20>;
+ };
+
+ qos_rkvenc_rd_m1: qos@fe138100 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe138100 0x0 0x20>;
+ };
+
+ qos_rkvenc_wr_m0: qos@fe138180 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe138180 0x0 0x20>;
+ };
+
+ qos_isp: qos@fe148000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe148000 0x0 0x20>;
+ };
+
+ qos_vicap0: qos@fe148080 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe148080 0x0 0x20>;
+ };
+
+ qos_vicap1: qos@fe148100 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe148100 0x0 0x20>;
+ };
+
+ qos_vpu: qos@fe150000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe150000 0x0 0x20>;
+ };
+
+ qos_ebc: qos@fe158000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe158000 0x0 0x20>;
+ };
+
+ qos_iep: qos@fe158100 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe158100 0x0 0x20>;
+ };
+
+ qos_jpeg_dec: qos@fe158180 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe158180 0x0 0x20>;
+ };
+
+ qos_jpeg_enc: qos@fe158200 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe158200 0x0 0x20>;
+ };
+
+ qos_rga_rd: qos@fe158280 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe158280 0x0 0x20>;
+ };
+
+ qos_rga_wr: qos@fe158300 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe158300 0x0 0x20>;
+ };
+
+ qos_npu: qos@fe180000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe180000 0x0 0x20>;
+ };
+
+ qos_pcie2x1: qos@fe190000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190000 0x0 0x20>;
+ };
+
+ qos_sata1: qos@fe190280 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190280 0x0 0x20>;
+ };
+
+ qos_sata2: qos@fe190300 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190300 0x0 0x20>;
+ };
+
+ qos_usb3_0: qos@fe190380 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190380 0x0 0x20>;
+ };
+
+ qos_usb3_1: qos@fe190400 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe190400 0x0 0x20>;
+ };
+
+ qos_rkvdec: qos@fe198000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe198000 0x0 0x20>;
+ };
+
+ qos_hdcp: qos@fe1a8000 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe1a8000 0x0 0x20>;
+ };
+
+ qos_vop_m0: qos@fe1a8080 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe1a8080 0x0 0x20>;
+ };
+
+ qos_vop_m1: qos@fe1a8100 {
+ compatible = "rockchip,rk3568-qos", "syscon";
+ reg = <0x0 0xfe1a8100 0x0 0x20>;
+ };
+
+ pcie2x1: pcie@fe260000 {
+ compatible = "rockchip,rk3568-pcie";
+ reg = <0x3 0xc0000000 0x0 0x00400000>,
+ <0x0 0xfe260000 0x0 0x00010000>,
+ <0x3 0x3f000000 0x0 0x01000000>;
+ reg-names = "dbi", "apb", "config";
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msi", "legacy", "err";
+ bus-range = <0x0 0xf>;
+ clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+ <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+ <&cru CLK_PCIE20_AUX_NDFT>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk", "aux";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ linux,pci-domain = <0>;
+ num-ib-windows = <6>;
+ num-ob-windows = <2>;
+ max-link-speed = <2>;
+ msi-map = <0x0 &gic 0x0 0x1000>;
+ num-lanes = <1>;
+ phys = <&combphy2 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3568_PD_PIPE>;
+ ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
+ 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
+ resets = <&cru SRST_PCIE20_POWERUP>;
+ reset-names = "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ pcie_intc: legacy-interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ sdmmc0: mmc@fe2b0000 {
+ compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe2b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
+ <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMC0>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@fe2c0000 {
+ compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe2c0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
+ <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMC1>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sfc: spi@fe300000 {
+ compatible = "rockchip,sfc";
+ reg = <0x0 0xfe300000 0x0 0x4000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "clk_sfc", "hclk_sfc";
+ pinctrl-0 = <&fspi_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ sdhci: mmc@fe310000 {
+ compatible = "rockchip,rk3568-dwcmshc";
+ reg = <0x0 0xfe310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
+ assigned-clock-rates = <200000000>, <24000000>;
+ clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+ <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+ <&cru TCLK_EMMC>;
+ clock-names = "core", "bus", "axi", "block", "timer";
+ status = "disabled";
+ };
+
+ spdif: spdif@fe460000 {
+ compatible = "rockchip,rk3568-spdif";
+ reg = <0x0 0xfe460000 0x0 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "mclk", "hclk";
+ clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
+ dmas = <&dmac1 1>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdifm0_tx>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s0_8ch: i2s@fe400000 {
+ compatible = "rockchip,rk3568-i2s-tdm";
+ reg = <0x0 0xfe400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+ assigned-clock-rates = <1188000000>, <1188000000>;
+ clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac1 0>;
+ dma-names = "tx";
+ resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s1_8ch: i2s@fe410000 {
+ compatible = "rockchip,rk3568-i2s-tdm";
+ reg = <0x0 0xfe410000 0x0 0x1000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>;
+ assigned-clock-rates = <1188000000>, <1188000000>;
+ clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
+ <&cru HCLK_I2S1_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac1 3>, <&dmac1 2>;
+ dma-names = "rx", "tx";
+ resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
+ &i2s1m0_lrcktx &i2s1m0_lrckrx
+ &i2s1m0_sdi0 &i2s1m0_sdi1
+ &i2s1m0_sdi2 &i2s1m0_sdi3
+ &i2s1m0_sdo0 &i2s1m0_sdo1
+ &i2s1m0_sdo2 &i2s1m0_sdo3>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s3_2ch: i2s@fe430000 {
+ compatible = "rockchip,rk3568-i2s-tdm";
+ reg = <0x0 0xfe430000 0x0 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>,
+ <&cru HCLK_I2S3_2CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac1 6>, <&dmac1 7>;
+ dma-names = "tx", "rx";
+ resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ pdm: pdm@fe440000 {
+ compatible = "rockchip,rk3568-pdm";
+ reg = <0x0 0xfe440000 0x0 0x1000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>;
+ clock-names = "pdm_clk", "pdm_hclk";
+ dmas = <&dmac1 9>;
+ dma-names = "rx";
+ pinctrl-0 = <&pdmm0_clk
+ &pdmm0_clk1
+ &pdmm0_sdi0
+ &pdmm0_sdi1
+ &pdmm0_sdi2
+ &pdmm0_sdi3>;
+ pinctrl-names = "default";
+ resets = <&cru SRST_M_PDM>;
+ reset-names = "pdm-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@fe530000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfe530000 0x0 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_BUS>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ dmac1: dma-controller@fe550000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfe550000 0x0 0x4000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_BUS>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ i2c1: i2c@fe5a0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c1_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@fe5b0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5b0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c2m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fe5c0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5c0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@fe5d0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5d0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c4m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@fe5e0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5e0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c5m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@fe600000 {
+ compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
+ reg = <0x0 0xfe600000 0x0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
+ clock-names = "tclk", "pclk";
+ };
+
+ spi0: spi@fe610000 {
+ compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfe610000 0x0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac0 20>, <&dmac0 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@fe620000 {
+ compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfe620000 0x0 0x1000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac0 22>, <&dmac0 23>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@fe630000 {
+ compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfe630000 0x0 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac0 24>, <&dmac0 25>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@fe640000 {
+ compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfe640000 0x0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac0 26>, <&dmac0 27>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart1: serial@fe650000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe650000 0x0 0x100>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 2>, <&dmac0 3>;
+ pinctrl-0 = <&uart1m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@fe660000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe660000 0x0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 4>, <&dmac0 5>;
+ pinctrl-0 = <&uart2m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@fe670000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe670000 0x0 0x100>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 6>, <&dmac0 7>;
+ pinctrl-0 = <&uart3m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@fe680000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe680000 0x0 0x100>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 8>, <&dmac0 9>;
+ pinctrl-0 = <&uart4m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@fe690000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe690000 0x0 0x100>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 10>, <&dmac0 11>;
+ pinctrl-0 = <&uart5m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart6: serial@fe6a0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6a0000 0x0 0x100>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 12>, <&dmac0 13>;
+ pinctrl-0 = <&uart6m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart7: serial@fe6b0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6b0000 0x0 0x100>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 14>, <&dmac0 15>;
+ pinctrl-0 = <&uart7m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart8: serial@fe6c0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6c0000 0x0 0x100>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 16>, <&dmac0 17>;
+ pinctrl-0 = <&uart8m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart9: serial@fe6d0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6d0000 0x0 0x100>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 18>, <&dmac0 19>;
+ pinctrl-0 = <&uart9m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ thermal_zones: thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <20>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ gpu_threshold: gpu-threshold {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_target: gpu-target {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_target>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ tsadc: tsadc@fe710000 {
+ compatible = "rockchip,rk3568-tsadc";
+ reg = <0x0 0xfe710000 0x0 0x100>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>;
+ assigned-clock-rates = <17000000>, <700000>;
+ clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>,
+ <&cru SRST_TSADCPHY>;
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-temp = <95000>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&tsadc_pin>;
+ pinctrl-1 = <&tsadc_shutorg>;
+ pinctrl-2 = <&tsadc_pin>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
+ saradc: saradc@fe720000 {
+ compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc";
+ reg = <0x0 0xfe720000 0x0 0x100>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_P_SARADC>;
+ reset-names = "saradc-apb";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@fe6e0000 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6e0000 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm4_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@fe6e0010 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6e0010 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@fe6e0020 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6e0020 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm6_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@fe6e0030 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6e0030 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm7_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm8: pwm@fe6f0000 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6f0000 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm8m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm9: pwm@fe6f0010 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6f0010 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm9m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm10: pwm@fe6f0020 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6f0020 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm10m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm11: pwm@fe6f0030 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe6f0030 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm11m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm12: pwm@fe700000 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe700000 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm12m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm13: pwm@fe700010 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe700010 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm13m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm14: pwm@fe700020 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe700020 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm14m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm15: pwm@fe700030 {
+ compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfe700030 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm15m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ combphy1: phy@fe830000 {
+ compatible = "rockchip,rk3568-naneng-combphy";
+ reg = <0x0 0xfe830000 0x0 0x100>;
+ clocks = <&pmucru CLK_PCIEPHY1_REF>,
+ <&cru PCLK_PIPEPHY1>,
+ <&cru PCLK_PIPE>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_PIPEPHY1>;
+ rockchip,pipe-grf = <&pipegrf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ combphy2: phy@fe840000 {
+ compatible = "rockchip,rk3568-naneng-combphy";
+ reg = <0x0 0xfe840000 0x0 0x100>;
+ clocks = <&pmucru CLK_PCIEPHY2_REF>,
+ <&cru PCLK_PIPEPHY2>,
+ <&cru PCLK_PIPE>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_PIPEPHY2>;
+ rockchip,pipe-grf = <&pipegrf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ usb2phy0: usb2phy@fe8a0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8a0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY0_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy0_480m";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy0_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ usb2phy0_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ usb2phy1: usb2phy@fe8b0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8b0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY1_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy1_480m";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy1_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ usb2phy1_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3568-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio@fdd60000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfdd60000 0x0 0x100>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@fe740000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe740000 0x0 0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@fe750000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe750000 0x0 0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@fe760000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe760000 0x0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@fe770000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe770000 0x0 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+#include "rk3568-pinctrl.dtsi"
compatible = "gpio-keys-polled";
poll-interval = <20>;
- left-joystick-left {
+ event-left-joystick-left {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
};
- left-joystick-right {
+ event-left-joystick-right {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
};
- left-joystick-up {
+ event-left-joystick-up {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
};
- left-joystick-down {
+ event-left-joystick-down {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
};
- right-joystick-left {
+ event-right-joystick-left {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
};
- right-joystick-right {
+ event-right-joystick-right {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
};
- right-joystick-up {
+ event-right-joystick-up {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
};
- right-joystick-down {
+ event-right-joystick-down {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
};
- dpad-left {
+ event-dpad-left {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
};
- dpad-right {
+ event-dpad-right {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
};
- dpad-up {
+ event-dpad-up {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
};
- dpad-down {
+ event-dpad-down {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
};
- x {
+ event-x {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
};
- y {
+ event-y {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
};
- a {
+ event-a {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
};
- b {
+ event-b {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
};
- select {
+ event-select {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
};
- start {
+ event-start {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
};
- top-left {
+ event-top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
};
- top-right {
+ event-top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- home {
+ key-home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- menu {
+ key-menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo2>;
vddio-supply = <®_dldo4>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <®_eldo1>;
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
cpu-supply = <®_dcdc2>;
};
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
vcc-hdmi-supply = <®_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
+ "Microphone", "Microphone Jack Right",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing = "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "Headphone Jack", "HP",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
+ "Microphone Jack Left", "MBIAS",
+ "MIC1", "Microphone Jack Left",
+ "Microphone Jack Right", "MBIAS",
+ "MIC2", "Microphone Jack Right";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
leds {
compatible = "gpio-leds";
- status {
+ led-0 {
label = "orangepi:green:status";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo2>;
vddio-supply = <®_dldo4>;
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- lid_switch {
+ lid-switch {
label = "Lid Switch";
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
linux,input-type = <EV_SW>;
compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
};
+&codec_analog {
+ allwinner,internal-bias-resistor;
+};
+
&sgm3140 {
enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
default-brightness-level = <400>;
};
+&codec_analog {
+ allwinner,internal-bias-resistor;
+};
+
&sgm3140 {
enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
status = "okay";
};
+&pio {
+ vcc-pc-supply = <®_dcdc1>;
+ vcc-pd-supply = <®_dldo2>;
+ vcc-pe-supply = <®_aldo1>;
+ vcc-pf-supply = <®_dcdc1>; /* No dedicated supply-pin for this */
+ vcc-pg-supply = <®_aldo2>;
+};
+
&pwm {
status = "okay";
};
// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ key-sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ key-sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
bluetooth {
compatible = "brcm,bcm4345c5";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
bluetooth {
compatible = "brcm,bcm4345c5";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun50i-h6-ccu.h>
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_XHCI>,
<&ccu CLK_BUS_XHCI>,
- <&rtc 0>;
+ <&rtc CLK_OSC32K>;
clock-names = "ref", "bus_early", "suspend";
resets = <&ccu RST_BUS_XHCI>;
/*
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
reg = <0x07022000 0x400>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
-
- reg_usb1_vbus: usb1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <®_vcc5v>;
- enable-active-high;
- gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
- status = "okay";
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
};
-/* USB 2 & 3 are on headers only. */
-
&emac0 {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
status = "okay";
};
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
&r_rsb {
status = "okay";
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <990000>;
regulator-name = "vdd-gpu-sys";
};
};
reg_dcdce: dcdce {
- regulator-boot-on;
+ regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-eth-mmc";
};
};
+&pio {
+ vcc-pc-supply = <®_aldo1>;
+ vcc-pf-supply = <®_aldo1>;
+ vcc-pg-supply = <®_bldo1>;
+ vcc-ph-supply = <®_aldo1>;
+ vcc-pi-supply = <®_aldo1>;
+};
+
&spi0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
flash@0 {
#address-cells = <1>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
-
-&usbotg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "X96 Mate";
+ compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_dcdce>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_dcdce>;
+ vqmmc-supply = <®_bldo1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp305: pmic@745 {
+ compatible = "x-powers,axp305", "x-powers,axp805",
+ "x-powers,axp806";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x745>;
+
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-sys";
+ };
+
+ /* Enabled by the Android BSP */
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-ext";
+ status = "disabled";
+ };
+
+ /* Enabled by the Android BSP */
+ reg_aldo3: aldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-ext2";
+ status = "disabled";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ /* Enabled by the Android BSP */
+ reg_bldo2: bldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8-2";
+ status = "disabled";
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ cldo1 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc2v5";
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-eth-mmc";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h616-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/reset/sun50i-h616-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
};
};
- osc24M: osc24M_clk {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * 256 KiB reserved for Trusted Firmware-A (BL31).
+ * This is added by BL31 itself, but some bootloaders fail
+ * to propagate this into the DTB handed to kernels.
+ */
+ secmon@40000000 {
+ reg = <0x0 0x40000000 0x0 0x40000>;
+ no-map;
+ };
+ };
+
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h616-ccu";
reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
function = "i2c3";
};
- ir_rx_pin: ir_rx_pin {
+ ir_rx_pin: ir-rx-pin {
pins = "PH10";
function = "ir_rx";
};
bias-pull-up;
};
+ /omit-if-no-ref/
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
bias-pull-up;
};
+ /omit-if-no-ref/
spi0_pins: spi0-pins {
- pins = "PC0", "PC2", "PC3", "PC4";
+ pins = "PC0", "PC2", "PC4";
function = "spi0";
};
+ /omit-if-no-ref/
+ spi0_cs0_pin: spi0-cs0-pin {
+ pins = "PC3";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
spi1_pins: spi1-pins {
pins = "PH6", "PH7", "PH8";
function = "spi1";
};
- spi1_cs_pin: spi1-cs-pin {
+ /omit-if-no-ref/
+ spi1_cs0_pin: spi1-cs0-pin {
pins = "PH5";
function = "spi1";
};
function = "uart0";
};
+ /omit-if-no-ref/
uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
+ /omit-if-no-ref/
uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "disabled";
+ max-frequency = <150000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
mmc-ddr-3_3v;
- mmc-ddr-1_8v;
cap-sdio-irq;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
status = "disabled";
+ max-frequency = <150000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
mmc-ddr-3_3v;
- mmc-ddr-1_8v;
cap-sdio-irq;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
status = "disabled";
+ max-frequency = <150000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
mmc-ddr-3_3v;
- mmc-ddr-1_8v;
cap-sdio-irq;
#address-cells = <1>;
#size-cells = <0>;
i2c0: i2c@5002000 {
compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002000 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
i2c1: i2c@5002400 {
compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002400 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
i2c2: i2c@5002800 {
compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002800 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
i2c3: i2c@5002c00 {
compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002c00 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
i2c4: i2c@5003000 {
compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05003000 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_SPI0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_SPI1>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
emac0: ethernet@5020000 {
- compatible = "allwinner,sun50i-h616-emac",
+ compatible = "allwinner,sun50i-h616-emac0",
"allwinner,sun50i-a64-emac";
- syscon = <&syscon>;
reg = <0x05020000 0x10000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC0>;
- reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC0>;
clock-names = "stmmaceth";
- status = "disabled";
-
- mdio0: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- emac1: ethernet@5030000 {
- compatible = "allwinner,sun50i-h616-emac";
- syscon = <&syscon 1>;
- reg = <0x05030000 0x10000>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC1>;
+ resets = <&ccu RST_BUS_EMAC0>;
reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC1>;
- clock-names = "stmmaceth";
+ syscon = <&syscon>;
status = "disabled";
- mdio1: mdio {
+ mdio0: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
- usbotg: usb@5100000 {
- compatible = "allwinner,sun50i-h616-musb",
- "allwinner,sun8i-h3-musb";
- reg = <0x05100000 0x0400>;
- clocks = <&ccu CLK_BUS_OTG>;
- resets = <&ccu RST_BUS_OTG>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- status = "disabled";
- };
-
- usbphy: phy@5100400 {
- compatible = "allwinner,sun50i-h616-usb-phy";
- reg = <0x05100400 0x24>,
- <0x05101800 0x14>,
- <0x05200800 0x14>,
- <0x05310800 0x14>,
- <0x05311800 0x14>;
- reg-names = "phy_ctrl",
- "pmu0",
- "pmu1",
- "pmu2",
- "pmu3";
- clocks = <&ccu CLK_USB_PHY0>,
- <&ccu CLK_USB_PHY1>,
- <&ccu CLK_USB_PHY2>,
- <&ccu CLK_USB_PHY3>;
- clock-names = "usb0_phy",
- "usb1_phy",
- "usb2_phy",
- "usb3_phy";
- resets = <&ccu RST_USB_PHY0>,
- <&ccu RST_USB_PHY1>,
- <&ccu RST_USB_PHY2>,
- <&ccu RST_USB_PHY3>;
- reset-names = "usb0_reset",
- "usb1_reset",
- "usb2_reset",
- "usb3_reset";
- status = "disabled";
- #phy-cells = <1>;
- };
-
- ehci0: usb@5101000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05101000 0x100>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI0>,
- <&ccu CLK_BUS_EHCI0>,
- <&ccu CLK_USB_OHCI0>;
- resets = <&ccu RST_BUS_OHCI0>,
- <&ccu RST_BUS_EHCI0>;
- phys = <&usbphy 0>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@5101400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05101400 0x100>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI0>,
- <&ccu CLK_USB_OHCI0>;
- resets = <&ccu RST_BUS_OHCI0>;
- phys = <&usbphy 0>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci1: usb@5200000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05200000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI1>,
- <&ccu CLK_BUS_EHCI1>,
- <&ccu CLK_USB_OHCI1>;
- resets = <&ccu RST_BUS_OHCI1>,
- <&ccu RST_BUS_EHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci1: usb@5200400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05200400 0x100>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI1>,
- <&ccu CLK_USB_OHCI1>;
- resets = <&ccu RST_BUS_OHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci2: usb@5310000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05310000 0x100>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI2>,
- <&ccu CLK_BUS_EHCI2>,
- <&ccu CLK_USB_OHCI2>;
- resets = <&ccu RST_BUS_OHCI2>,
- <&ccu RST_BUS_EHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci2: usb@5310400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05310400 0x100>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI2>,
- <&ccu CLK_USB_OHCI2>;
- resets = <&ccu RST_BUS_OHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci3: usb@5311000 {
- compatible = "allwinner,sun50i-h616-ehci",
- "generic-ehci";
- reg = <0x05311000 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI3>,
- <&ccu CLK_BUS_EHCI3>,
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_OHCI3>,
- <&ccu RST_BUS_EHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci3: usb@5311400 {
- compatible = "allwinner,sun50i-h616-ohci",
- "generic-ohci";
- reg = <0x05311400 0x100>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_OHCI3>,
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_OHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
rtc: rtc@7000000 {
- compatible = "allwinner,sun50i-h616-rtc",
- "allwinner,sun50i-h6-rtc";
+ compatible = "allwinner,sun50i-h616-rtc";
reg = <0x07000000 0x400>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clock-output-names = "osc32k", "osc32k-out", "iosc";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
+ <&ccu CLK_PLL_SYSTEM_32K>;
+ clock-names = "bus", "hosc",
+ "pll-32k";
#clock-cells = <1>;
};
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h616-r-ccu";
- reg = <0x07010000 0x400>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ reg = <0x07010000 0x210>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-h616-r-pinctrl";
reg = <0x07022000 0x400>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
+ /omit-if-no-ref/
r_i2c_pins: r-i2c-pins {
pins = "PL0", "PL1";
function = "s_i2c";
};
ir: ir@7040000 {
- compatible = "allwinner,sun50i-h616-ir",
- "allwinner,sun6i-a31-ir";
- reg = <0x07040000 0x400>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1_IR>,
- <&r_ccu CLK_IR>;
- clock-names = "apb", "ir";
- resets = <&r_ccu RST_R_APB1_IR>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_rx_pin>;
- status = "disabled";
+ compatible = "allwinner,sun50i-h616-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x07040000 0x400>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1_IR>,
+ <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_R_APB1_IR>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx_pin>;
+ status = "disabled";
};
r_i2c: i2c@7081400 {
compatible = "allwinner,sun50i-h616-i2c",
+ "allwinner,sun8i-v536-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
compatible = "gpio-leds";
led-0 {
- label ="licheepi:red:usr";
+ label = "licheepi:red:usr";
gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
};
led-1 {
- label ="licheepi:green:usr";
+ label = "licheepi:green:usr";
gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-2 {
- label ="licheepi:blue:usr";
+ label = "licheepi:blue:usr";
gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
};
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/reset/sun6i-a31-ccu.h>
/ {
ccu: clock@1c20000 {
compatible = "allwinner,sun6i-a31-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&rtc 0>, <&osc24M>,
+ clocks = <&rtc CLK_OSC32K>, <&osc24M>,
<&ccu CLK_PLL_PERIPH>,
<&ccu CLK_PLL_PERIPH>;
clock-output-names = "ar100";
ir_clk: ir_clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
- clocks = <&rtc 0>, <&osc24M>;
+ clocks = <&rtc CLK_OSC32K>, <&osc24M>;
clock-output-names = "ir";
};
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
- resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- home {
+ key-home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- menu {
+ key-menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
ccu: clock@1c20000 {
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
/* interrupts get set in SoC specific dtsi file */
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
- resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a23.dtsi"
-#include "sun8i-q8-common.dtsi"
-
-/ {
- model = "Q8 A23 Tablet";
- compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
-};
-
-&codec {
- allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
- allwinner,audio-routing =
- "Headphone", "HP",
- "Headphone", "HPCOM",
- "Speaker", "HP",
- "MIC1", "Mic",
- "MIC2", "Headset Mic",
- "Mic", "MBIAS",
- "Headset Mic", "HBIAS";
- status = "okay";
-};
-
-&panel {
- compatible = "bananapi,s070wv20-ct16";
-};
-
-&tcon0_out {
- tcon0_out_lcd: endpoint {
- remote-endpoint = <&panel_input>;
- };
-};
--- /dev/null
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a23.dtsi"
-#include "sun8i-q8-common.dtsi"
-
-/ {
- model = "Q8 A23 Tablet";
- compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
-};
-
-&codec {
- allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
- allwinner,audio-routing =
- "Headphone", "HP",
- "Headphone", "HPCOM",
- "Speaker", "HP",
- "MIC1", "Mic",
- "MIC2", "Headset Mic",
- "Mic", "MBIAS",
- "Headset Mic", "HBIAS";
- status = "okay";
-};
-
-&panel {
- compatible = "bananapi,s070wv20-ct16";
-};
-
-&tcon0_out {
- tcon0_out_lcd: endpoint {
- remote-endpoint = <&panel_input>;
- };
-};
--- /dev/null
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sun8i-q8-common.dtsi"
-
-/ {
- model = "Q8 A33 Tablet";
- compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
-};
-
-&tcon0_out {
- tcon0_out_lcd: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
-};
--- /dev/null
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sun8i-q8-common.dtsi"
-
-/ {
- model = "Q8 A33 Tablet";
- compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
-};
-
-&tcon0_out {
- tcon0_out_lcd: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
-};
--- /dev/null
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
};
- r-gpio-keys {
+ gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
};
- user {
+ key-user {
label = "user";
linux,code = <BTN_0>;
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- k1 {
+ key-0 {
label = "k1";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- input-name = "k1";
- k1 {
+ key-0 {
label = "k1";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw2 {
+ switch-2 {
label = "sw2";
linux,code = <BTN_1>;
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
};
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
- r_gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "sw4";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_dldo1>;
vddio-supply = <®_aldo3>;
/dts-v1/;
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&de {
status = "okay";
};
--- /dev/null
+/{
+ cpu0_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1000000 1000000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1100000 1100000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1160000 1160000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1240000 1240000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1300000 1300000 1300000>;
+ clock-latency-ns = <2000000>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
&i2c0 {
status = "okay";
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/clock/sun8i-tcon-top.h>
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPU>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
};
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_hot_trip: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot_trip: cpu-very-hot {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu_hot_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
gpu_thermal: gpu-thermal {
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
reg-io-width = <1>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
/dts-v1/;
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&de {
status = "okay";
};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/reset/sun8i-v3s-ccu.h>
#include <dt-bindings/clock/sun8i-de2.h>
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-v3s-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
/dts-v1/;
#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&de {
status = "okay";
};
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
- resets = <&apbs_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- sw4 {
+ switch-4 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <1500000>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
};
};
bluetooth {
compatible = "brcm,bcm43438-bt";
- clocks = <&rtc 1>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
vddio-supply = <®_vcc3v3>;
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-h3-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
ccu: clock@1c20000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc 0>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu CLK_HDMI>, <&rtc 0>;
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-h3-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
/* CRU_PMU_CLK_SEL0_CON */
CLK_PMU_PCLK_DIV_SHIFT = 0,
CLK_PMU_PCLK_DIV_MASK = 0x1f << CLK_PMU_PCLK_DIV_SHIFT,
+
+ /* CRU_PMU_CLKSEL3_CON */
+ UART0_PLL_SEL_SHIFT = 14,
+ UART0_PLL_SEL_MASK = 3 << UART0_PLL_SEL_SHIFT,
+ UART0_PLL_SEL_GPLL = 0,
+ UART0_PLL_SEL_24M,
+ UART0_PLL_SEL_480M,
+ UART0_PLL_SEL_NPLL,
+ UART0_DIV_CON_SHIFT = 0,
+ UART0_DIV_CON_MASK = 0x1f << UART0_DIV_CON_SHIFT,
+
+ /* CRU_PMU_CLKSEL4_CON */
+ UART0_CLK_SEL_SHIFT = 14,
+ UART0_CLK_SEL_MASK = 3 << UART0_PLL_SEL_SHIFT,
+ UART0_CLK_SEL_UART0 = 0,
+ UART0_CLK_SEL_UART0_NP5,
+ UART0_CLK_SEL_UART0_FRAC,
+ UART0_DIVNP5_SHIFT = 0,
+ UART0_DIVNP5_MASK = 0x1f << UART0_DIVNP5_SHIFT,
};
#endif
#define PMUGRF_BASE 0xff010000
#define GRF_BASE 0xff140000
#define CRU_BASE 0xff2b0000
+#define PMUCRU_BASE 0xff2bc000
#define VIDEO_PHY_BASE 0xff2e0000
#define SERVICE_CORE_ADDR 0xff508000
#define DDR_FW_BASE 0xff534000
GPIO3A1_UART5_RX = 4,
};
+/* PMUGRF_GPIO0BL_IOMUX */
+enum {
+ GPIO0B3_SHIFT = 6,
+ GPIO0B3_MASK = 0x3 << GPIO0B3_SHIFT,
+ GPIO0B3_GPIO = 0,
+ GPIO0B3_UART0_RX,
+ GPIO0B3_PMU_DEBUG1,
+
+ GPIO0B2_SHIFT = 4,
+ GPIO0B2_MASK = 0x3 << GPIO0B2_SHIFT,
+ GPIO0B2_GPIO = 0,
+ GPIO0B2_UART0_TX,
+ GPIO0B2_PMU_DEBUG0,
+};
+
/* PMUGRF_GPIO0CL_IOMUX */
enum {
GPIO0C1_SHIFT = 2,
void board_debug_uart_init(void)
{
#if defined(CONFIG_DEBUG_UART_BASE) && \
- (CONFIG_DEBUG_UART_BASE == 0xff168000) && \
- (CONFIG_DEBUG_UART_CHANNEL != 1)
+ (((CONFIG_DEBUG_UART_BASE == 0xff168000) && \
+ (CONFIG_DEBUG_UART_CHANNEL != 1)) || \
+ CONFIG_DEBUG_UART_BASE == 0xff030000)
static struct px30_pmugrf * const pmugrf = (void *)PMUGRF_BASE;
#endif
static struct px30_grf * const grf = (void *)GRF_BASE;
static struct px30_cru * const cru = (void *)CRU_BASE;
+#if defined(CONFIG_DEBUG_UART_BASE) && CONFIG_DEBUG_UART_BASE == 0xff030000
+ static struct px30_pmucru * const pmucru = (void *)PMUCRU_BASE;
+#endif
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff158000)
/* uart_sel_clk default select 24MHz */
GPIO3A2_MASK | GPIO3A1_MASK,
GPIO3A2_UART5_TX << GPIO3A2_SHIFT |
GPIO3A1_UART5_RX << GPIO3A1_SHIFT);
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff030000)
+ /* uart_sel_clk default select 24MHz */
+ rk_clrsetreg(&pmucru->pmu_clksel_con[3],
+ UART0_PLL_SEL_MASK | UART0_DIV_CON_MASK,
+ UART0_PLL_SEL_24M << UART0_PLL_SEL_SHIFT | 0);
+ rk_clrsetreg(&pmucru->pmu_clksel_con[4],
+ UART0_CLK_SEL_MASK,
+ UART0_CLK_SEL_UART0 << UART0_CLK_SEL_SHIFT);
+
+ rk_clrsetreg(&pmugrf->gpio0bl_iomux,
+ GPIO0B3_MASK | GPIO0B2_MASK,
+ GPIO0B3_UART0_RX << GPIO0B3_SHIFT |
+ GPIO0B2_UART0_TX << GPIO0B2_SHIFT);
#else
/* GRF_IOFUNC_CON0 */
enum {
config TARGET_PHYCORE_RK3288
bool "phyCORE-RK3288"
select BOARD_LATE_INIT
- select SPL_BOARD_INIT if SPL
help
Add basic support for the PCM-947 carrier board, a RK3288 based
development board made by PHYTEC. This board works in a combination
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru.h>
#include <asm/arch-rockchip/gpio.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
"u-boot,spl-boot-device", boot_ofpath);
}
-#if defined(SPL_GPIO)
static void rk3399_force_power_on_reset(void)
{
ofnode node;
struct gpio_desc sysreset_gpio;
+ if (!IS_ENABLED(CONFIG_SPL_GPIO)) {
+ debug("%s: trying to force a power-on reset but no GPIO "
+ "support in SPL!\n", __func__);
+ return;
+ }
+
debug("%s: trying to force a power-on reset\n", __func__);
node = ofnode_path("/config");
dm_gpio_set_value(&sysreset_gpio, 1);
}
-#endif
void __weak led_setup(void)
{
{
led_setup();
-#if defined(SPL_GPIO)
- struct rockchip_cru *cru = rockchip_get_cru();
+ if (IS_ENABLED(CONFIG_SPL_GPIO)) {
+ struct rockchip_cru *cru = rockchip_get_cru();
- /*
- * The RK3399 resets only 'almost all logic' (see also in the TRM
- * "3.9.4 Global software reset"), when issuing a software reset.
- * This may cause issues during boot-up for some configurations of
- * the application software stack.
- *
- * To work around this, we test whether the last reset reason was
- * a power-on reset and (if not) issue an overtemp-reset to reset
- * the entire module.
- *
- * While this was previously fixed by modifying the various places
- * that could generate a software reset (e.g. U-Boot's sysreset
- * driver, the ATF or Linux), we now have it here to ensure that
- * we no longer have to track this through the various components.
- */
- if (cru->glb_rst_st != 0)
- rk3399_force_power_on_reset();
-#endif
+ /*
+ * The RK3399 resets only 'almost all logic' (see also in the
+ * TRM "3.9.4 Global software reset"), when issuing a software
+ * reset. This may cause issues during boot-up for some
+ * configurations of the application software stack.
+ *
+ * To work around this, we test whether the last reset reason
+ * was a power-on reset and (if not) issue an overtemp-reset to
+ * reset the entire module.
+ *
+ * While this was previously fixed by modifying the various
+ * places that could generate a software reset (e.g. U-Boot's
+ * sysreset driver, the ATF or Linux), we now have it here to
+ * ensure that we no longer have to track this through the
+ * various components.
+ */
+ if (cru->glb_rst_st != 0)
+ rk3399_force_power_on_reset();
+ }
-#if defined(SPL_DM_REGULATOR)
- /*
- * Turning the eMMC and SPI back on (if disabled via the Qseven
- * BIOS_ENABLE) signal is done through a always-on regulator).
- */
- if (regulators_enable_boot_on(false))
- debug("%s: Cannot enable boot on regulator\n", __func__);
-#endif
+ if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
+ /*
+ * Turning the eMMC and SPI back on (if disabled via the Qseven
+ * BIOS_ENABLE) signal is done through a always-on regulator).
+ */
+ if (regulators_enable_boot_on(false))
+ debug("%s: Cannot enable boot on regulator\n",
+ __func__);
+ }
}
#endif
select CPU_ARM926EJS
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
+ select SKIP_LOWLEVEL_INIT_ONLY
+ select SPL_SKIP_LOWLEVEL_INIT_ONLY
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
config SYS_SOC
default "sunxi"
+config SUNXI_MINIMUM_DRAM_MB
+ int "minimum DRAM size"
+ default 32 if MACH_SUNIV
+ default 64 if MACH_SUN8I_V3S
+ default 256
+ ---help---
+ Minimum DRAM size expected on the board. Traditionally we assumed
+ 256 MB, so that U-Boot would load at 160MB. With co-packaged DRAM
+ we have smaller sizes, though, so that U-Boot's own load address and
+ the default payload addresses must be shifted down.
+ This is expected to be fixed by the SoC selection.
+
config UART0_PORT_F
bool "UART0 on MicroSD breakout board"
---help---
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
- depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 || MACH_SUNIV
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 || MACH_SUNIV
help
Enable support for SPI Flash. This option allows SPL to read from
sunxi SPI Flash. It uses the same method as the boot ROM, so does
sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUNIV)
+ sunxi_gpio_set_cfgpin(SUNXI_GPA(2), SUNIV_GPE_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPA(3), SUNIV_GPE_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPA(3), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
}
#endif
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && defined(CONFIG_CPU_V7A)
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
#define CCM_AHB_GATING0 (0x01C20000 + 0x60)
#define CCM_H6_SPI_BGR_REG (0x03001000 + 0x96c)
-#ifdef CONFIG_MACH_SUN50I_H6
+#ifdef CONFIG_SUN50I_GEN_H6
#define CCM_SPI0_CLK (0x03001000 + 0x940)
#else
#define CCM_SPI0_CLK (0x01C20000 + 0xA0)
/*
* Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting
* from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3.
- * The H6 uses PC0, PC2, PC3, PC5.
+ * The H6 uses PC0, PC2, PC3, PC5, the H616 PC0, PC2, PC3, PC4.
*/
static void spi0_pinmux_setup(unsigned int pin_function)
{
sunxi_gpio_set_cfgpin(SUNXI_GPC(0), pin_function);
sunxi_gpio_set_cfgpin(SUNXI_GPC(2), pin_function);
- /* All chips except H6 use PC1, and only H6 uses PC5. */
- if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ /* All chips except H6 and H616 use PC1. */
+ if (!IS_ENABLED(CONFIG_SUN50I_GEN_H6))
sunxi_gpio_set_cfgpin(SUNXI_GPC(1), pin_function);
- else
+
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
sunxi_gpio_set_cfgpin(SUNXI_GPC(5), pin_function);
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(4), pin_function);
/* Older generations use PC23 for CS, newer ones use PC3. */
if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I) ||
static bool is_sun6i_gen_spi(void)
{
return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ||
- IS_ENABLED(CONFIG_MACH_SUN50I_H6);
+ IS_ENABLED(CONFIG_SUN50I_GEN_H6);
}
static uintptr_t spi0_base_address(void)
if (IS_ENABLED(CONFIG_MACH_SUN8I_R40))
return 0x01C05000;
- if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ if (IS_ENABLED(CONFIG_SUN50I_GEN_H6))
return 0x05010000;
if (!is_sun6i_gen_spi() ||
uintptr_t base = spi0_base_address();
/* Deassert SPI0 reset on SUN6I */
- if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ if (IS_ENABLED(CONFIG_SUN50I_GEN_H6))
setbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
else if (is_sun6i_gen_spi())
setbits_le32(SUN6I_BUS_SOFT_RST_REG0,
(1 << AHB_RESET_SPI0_SHIFT));
/* Open the SPI0 gate */
- if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ if (!IS_ENABLED(CONFIG_SUN50I_GEN_H6))
setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
if (IS_ENABLED(CONFIG_MACH_SUNIV)) {
writel(0, CCM_SPI0_CLK);
/* Close the SPI0 gate */
- if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ if (!IS_ENABLED(CONFIG_SUN50I_GEN_H6))
clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
/* Assert SPI0 reset on SUN6I */
- if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ if (IS_ENABLED(CONFIG_SUN50I_GEN_H6))
clrbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
else if (is_sun6i_gen_spi())
clrbits_le32(SUN6I_BUS_SOFT_RST_REG0,
unsigned int pin_function = SUNXI_GPC_SPI0;
if (IS_ENABLED(CONFIG_MACH_SUN50I) ||
- IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ IS_ENABLED(CONFIG_SUN50I_GEN_H6))
pin_function = SUN50I_GPC_SPI0;
else if (IS_ENABLED(CONFIG_MACH_SUNIV))
pin_function = SUNIV_GPC_SPI0;
when building U-Boot, which results in compressed instructions in the
U-Boot binary.
+config RISCV_ISA_F
+ bool "Standard extension for Single-Precision Floating Point"
+ default y
+ help
+ Adds "F" to the ISA string passed to the compiler.
+
+config RISCV_ISA_D
+ bool "Standard extension for Double-Precision Floating Point"
+ depends on RISCV_ISA_F
+ default y
+ help
+ Adds "D" to the ISA string passed to the compiler and changes the
+ riscv32 ABI from ilp32 to ilp32d and the riscv64 ABI from lp64 to
+ lp64d.
+
config RISCV_ISA_A
def_bool y
ifeq ($(CONFIG_ARCH_RV64I),y)
ARCH_BASE = rv64im
- ABI = lp64
+ ABI_BASE = lp64
endif
ifeq ($(CONFIG_ARCH_RV32I),y)
ARCH_BASE = rv32im
- ABI = ilp32
+ ABI_BASE = ilp32
endif
ifeq ($(CONFIG_RISCV_ISA_A),y)
ARCH_A = a
endif
+ifeq ($(CONFIG_RISCV_ISA_F),y)
+ ARCH_F = f
+endif
+ifeq ($(CONFIG_RISCV_ISA_D),y)
+ ARCH_D = d
+ ABI_D = d
+endif
ifeq ($(CONFIG_RISCV_ISA_C),y)
ARCH_C = c
endif
CMODEL = medany
endif
-RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
+
+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_F)$(ARCH_D)$(ARCH_C)
+ABI = $(ABI_BASE)$(ABI_D)
# Newer binutils versions default to ISA spec version 20191213 which moves some
# instructions from the I extension to the Zicsr and Zifencei extensions.
/* claim register */
#define CLAIM_REG(base, hart) ((ulong)(base) + 0x200004 + (hart) * 0x1000)
-#define ENABLE_HART_IPI (0x80808080)
-#define SEND_IPI_TO_HART(hart) (0x80 >> (hart))
+#define ENABLE_HART_IPI (0x01010101)
+#define SEND_IPI_TO_HART(hart) (0x1 << (hart))
DECLARE_GLOBAL_DATA_PTR;
{
unsigned int en;
- en = ENABLE_HART_IPI >> hart;
+ en = ENABLE_HART_IPI << hart;
writel(en, (void __iomem *)ENABLE_REG(gd->arch.plic, hart));
+ writel(en, (void __iomem *)ENABLE_REG(gd->arch.plic + 0x4, hart));
return 0;
}
*err = 0;
if (IS_ENABLED(CONFIG_OF_SEPARATE) || IS_ENABLED(CONFIG_OF_BOARD)) {
- if (gd->arch.firmware_fdt_addr)
+ if (fdt_magic((uintptr_t)gd->arch.firmware_fdt_addr) == FDT_MAGIC)
return (void *)(ulong)gd->arch.firmware_fdt_addr;
}
config SPL_OPENSBI_LOAD_ADDR
hex
- default 0x81000000
+ default 0x80100000
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
#include <netdev.h>
#include <linux/bitops.h>
#include "som.h"
-#include <power/regulator.h>
-#include <power/rk8xx_pmic.h>
static int valid_rk3288_som(struct rk3288_som *som)
{
return 0;
}
-
-#ifdef CONFIG_SPL_BUILD
-#if !defined(CONFIG_SPL_OF_PLATDATA)
-static int phycore_init(void)
-{
- struct udevice *pmic;
- int ret;
-
- ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
- if (ret)
- return ret;
-
-#if defined(CONFIG_SPL_POWER)
- /* Increase USB input current to 2A */
- ret = rk818_spl_configure_usb_input_current(pmic, 2000);
- if (ret)
- return ret;
-
- /* Close charger when USB lower then 3.26V */
- ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
- if (ret)
- return ret;
-#endif
-
- return 0;
-}
-#endif
-
-void spl_board_init(void)
-{
-#if !defined(CONFIG_SPL_OF_PLATDATA)
- int ret;
-
- if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
- ret = phycore_init();
- if (ret) {
- debug("Failed to set up phycore power settings: %d\n",
- ret);
- return;
- }
- }
-#endif
-}
-#endif
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+EAIDK-610
+M: Andy Yan <andy.yan@rock-chips.com>
+S: Maintained
+F: configs/eaidk-610-rk3399_defconfig
+F: arch/arm/dts/rk3399-eaidk-610-u-boot.dtsi
+
KHADAS-EDGE
M: Nick Xie <nick@khadas.com>
S: Maintained
S: Maintained
F: configs/Wexler_TAB7200_defconfig
+X96 MATE TV BOX
+M: Andre Przywara <andre.przywara@arm.com>
+S: Maintained
+F: configs/x96_mate_defconfig
+
YONES TOPTECH BD1078 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
config ENV_SIZE
default 0x4000
-config ENV_OFFSET
- default 0x3fc000 if ENV_IS_IN_SPI_FLASH
-
choice
prompt "Theobroma Systems RK3399-Q7 DDR Option"
default TARGET_PUMA_RK3399_RAM_DDR3_1333
> cd ../u-boot
> make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
-Package the image
-=================
-
-The SPL image for SD-Card/eMMC is readily available in idbloader.img at the
-root of U-Boot after compilation.
-
-Creating an SPL image for SPI-NOR:
- > tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader-spi.img
-
Flash the image
===============
-Copy the SPL to offset 32k for SD/eMMC, offset 0 for NOR-Flash and the FIT
-image to offset 256k.
+Copy u-boot-rockchip.bin to offset 32k for SD/eMMC.
+Copy u-boot-rockchip-spi.bin to offset 0 for NOR-flash.
SD-Card
-------
- > dd if=idbloader.img of=/dev/sdb seek=64
- > dd if=u-boot.itb of=/dev/sdb seek=512
+ > dd if=u-boot-rockchip.bin of=/dev/sdb seek=64
eMMC
----
> ./tools/boot_merger RKBOOT/RK3399MINIALL.ini
> cd ..
> ./rkdeveloptool db rkbin/rk3399_loader_v1.25.126.bin
- > ./rkdeveloptool wl 64 ../idbloader.img
- > ./rkdeveloptool wl 512 ../u-boot.itb
+ > ./rkdeveloptool wl 64 ../u-boot-rockchip.bin
NOR-Flash
---------
> cd ..
> ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin
> ./rkdeveloptool ef
- > ./rkdeveloptool wl 0 ../idbloader-spi.img
- > ./rkdeveloptool wl 512 ../u-boot.itb
+ > ./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin
#include <common.h>
#include <dm.h>
#include <env.h>
+#include <env_internal.h>
#include <init.h>
#include <log.h>
#include <misc.h>
}
/*
- * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and
- * only consider cases where the default boot-order first
- * tries to boot from mmc0 (eMMC) and then from mmc1
- * (i.e. external SD).
- *
- * In other words: the SD card will be moved to earlier in the
- * order, if U-Boot was also loaded from the SD-card.
+ * Make the default boot medium between SD Card and eMMC, the one that
+ * was used to load U-Boot proper. If SPI-NOR flash was used, keep
+ * original default order.
*/
- if (!strcmp(boot_device, "/mmc@fe320000")) {
+ if (strcmp(boot_device, "/spi@ff1d0000/flash@0")) {
+ bool sd_booted = !strcmp(boot_device, "/mmc@fe320000");
char *mmc0, *mmc1;
- debug("%s: booted from SD-Card\n", __func__);
+ debug("%s: booted from %s\n", __func__,
+ sd_booted ? "SD-Card" : "eMMC");
mmc0 = strstr(env, "mmc0");
mmc1 = strstr(env, "mmc1");
}
/*
- * If mmc0 comes first in the boot order, we need to change
- * the strings to make mmc1 first.
+ * If mmc0 comes first in the boot order and U-Boot proper was
+ * loaded from mmc1, swap mmc0 and mmc1 in the list.
+ * If mmc1 comes first in the boot order and U-Boot proper was
+ * loaded from mmc0, swap mmc0 and mmc1 in the list.
*/
- if (mmc0 < mmc1) {
+ if ((mmc0 < mmc1 && sd_booted) ||
+ (mmc0 > mmc1 && !sd_booted)) {
mmc0[3] = '1';
mmc1[3] = '0';
debug("%s: set boot_targets to: %s\n", __func__, env);
return 0;
}
+int mmc_get_env_dev(void)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+ return CONFIG_SYS_MMC_ENV_DEV;
+ }
+
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ if (!strcmp(boot_device, "/mmc@fe320000"))
+ return 1;
+
+ if (!strcmp(boot_device, "/mmc@fe330000"))
+ return 0;
+
+ return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+#if !IS_ENABLED(CONFIG_ENV_IS_NOWHERE)
+#error Please enable CONFIG_ENV_IS_NOWHERE
+#endif
+
+enum env_location arch_env_get_location(enum env_operation op, int prio)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+
+ if (prio > 0)
+ return ENVL_UNKNOWN;
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+ return ENVL_NOWHERE;
+ }
+
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) &&
+ !strcmp(boot_device, "/spi@ff1d0000/flash@0"))
+ return ENVL_SPI_FLASH;
+
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
+ (!strcmp(boot_device, "/mmc@fe320000") ||
+ !strcmp(boot_device, "/mmc@fe330000")))
+ return ENVL_MMC;
+
+ printf("%s: No environment available: booted from %s but U-Boot "
+ "config does not allow loading environment from it.",
+ __func__, boot_device);
+
+ return ENVL_NOWHERE;
+}
+
int misc_init_r(void)
{
const u32 cpuid_offset = 0x7;
return 0;
}
-
-#ifdef CONFIG_SERIAL_TAG
-void get_board_serial(struct tag_serialnr *serialnr)
-{
- char *serial_string;
- u64 serial = 0;
-
- serial_string = env_get("serial#");
-
- if (serial_string)
- serial = simple_strtoull(serial_string, NULL, 16);
-
- serialnr->high = (u32)(serial >> 32);
- serialnr->low = (u32)(serial & 0xffffffff);
-}
-#endif
default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
default 0x81700000 if MACH_SUNIV
default 0x2a000000 if MACH_SUN9I
- default 0x42e00000 if MACH_SUN8I_V3S
- default 0x4a000000 if ARCH_SUNXI
+ default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
+ default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
hex "Text Base"
help
The address in memory that U-Boot will be running from, initially.
config SYS_PBSIZE
int "Buffer size for console output"
+ default 1024 if ARCH_SUNXI
default 1044
config SYS_XTRACE
};
static struct sbi_ext extensions[] = {
- { SBI_EXT_0_1_SET_TIMER, "sbi_set_timer" },
- { SBI_EXT_0_1_CONSOLE_PUTCHAR, "sbi_console_putchar" },
- { SBI_EXT_0_1_CONSOLE_GETCHAR, "sbi_console_getchar" },
- { SBI_EXT_0_1_CLEAR_IPI, "sbi_clear_ipi" },
- { SBI_EXT_0_1_SEND_IPI, "sbi_send_ipi" },
- { SBI_EXT_0_1_REMOTE_FENCE_I, "sbi_remote_fence_i" },
- { SBI_EXT_0_1_REMOTE_SFENCE_VMA, "sbi_remote_sfence_vma" },
- { SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID, "sbi_remote_sfence_vma_asid" },
- { SBI_EXT_0_1_SHUTDOWN, "sbi_shutdown" },
+ { SBI_EXT_0_1_SET_TIMER, "Set Timer" },
+ { SBI_EXT_0_1_CONSOLE_PUTCHAR, "Console Putchar" },
+ { SBI_EXT_0_1_CONSOLE_GETCHAR, "Console Getchar" },
+ { SBI_EXT_0_1_CLEAR_IPI, "Clear IPI" },
+ { SBI_EXT_0_1_SEND_IPI, "Send IPI" },
+ { SBI_EXT_0_1_REMOTE_FENCE_I, "Remote FENCE.I" },
+ { SBI_EXT_0_1_REMOTE_SFENCE_VMA, "Remote SFENCE.VMA" },
+ { SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID, "Remote SFENCE.VMA with ASID" },
+ { SBI_EXT_0_1_SHUTDOWN, "System Shutdown" },
{ SBI_EXT_BASE, "SBI Base Functionality" },
{ SBI_EXT_TIME, "Timer Extension" },
{ SBI_EXT_IPI, "IPI Extension" },
long mvendorid, marchid, mimpid;
ret = sbi_get_spec_version();
- if (ret >= 0)
- printf("SBI %ld.%ld", ret >> 24, ret & 0xffffff);
+ if (ret < 0) {
+ printf("No SBI 0.2+\n");
+ return CMD_RET_FAILURE;
+ }
+ printf("SBI %ld.%ld", ret >> 24, ret & 0xffffff);
impl_id = sbi_get_impl_id();
if (impl_id >= 0) {
for (i = 0; i < ARRAY_SIZE(implementations); ++i) {
vers >> 16, vers & 0xffff);
break;
case 3: /* KVM */
+ case 4: /* RustSBI */
printf("%ld.%ld.%ld",
vers >> 16,
(vers >> 8) & 0xff,
default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB
default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x10000
default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x20000 && !MACH_SUN50I_H616
+ default 0xbfa0 if MACH_SUN50I_H616
default 0x7000 if RCAR_GEN3
default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0
default 0x10000 if ASPEED_AST2600
default 0x946bb8 if ARCH_MX7
default 0x93ffb8 if ARCH_MX6 && MX6_OCRAM_256KB
default 0x91ffb8 if ARCH_MX6 && !MX6_OCRAM_256KB
+ default 0x118000 if MACH_SUN50I_H6
+ default 0x58000 if MACH_SUN50I_H616
+ default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5
+ default 0x18000 if MACH_SUN9I
+ default 0x8000 if ARCH_SUNXI
help
Address of the start of the stack SPL will use before SDRAM is
initialized.
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_DFU_RAM=y
CONFIG_SPL_SPI_SUNXI=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_SCSI_AHCI=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_SCSI_AHCI=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_VIDEO_LCD_BL_EN="PB2"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_NETCONSOLE=y
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_ID_DET="PH8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_NETCONSOLE=y
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_CHIP_DIP_SCAN=y
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_DFU_RAM=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB1_VBUS_PIN="PH14"
CONFIG_USB3_VBUS_PIN="PH15"
CONFIG_AXP_GPIO=y
-CONFIG_SPL_STACK=0x18000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_SUN8I_RSB=y
CONFIG_AXP809_POWER=y
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_GMAC_TX_DELAY=1
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_SCSI_AHCI=y
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
# CONFIG_NETDEVICES is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SATAPWR="PH2"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_USB_MUSB_HOST=y
CONFIG_MACH_SUN4I=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_USB1_VBUS_PIN="PH4"
CONFIG_USB3_VBUS_PIN="PH5"
CONFIG_AXP_GPIO=y
-CONFIG_SPL_STACK=0x18000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_SUN8I_RSB=y
CONFIG_AXP809_POWER=y
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y
# CONFIG_MMC is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_DFU=y
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_SATAPWR="PD25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_INITIAL_USB_SCAN_DELAY=500
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_USB3_VBUS_PIN="PL8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x18000
-CONFIG_SYS_PBSIZE=1024
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_MMC0_CD_PIN="PB3"
CONFIG_USB1_VBUS_PIN="PG12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB2_VBUS_PIN="PH12"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_NETCONSOLE=y
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SCSI_AHCI=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x118000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_DRAM_CLK=567
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
+CONFIG_DM_RESET=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_ROCKCHIP_SERIAL=y
CONFIG_SOUND=y
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO2_VOLT=1800
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-eaidk-610"
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_DEBUG_UART=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-eaidk-610.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x400000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x400000
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
# CONFIG_DRAM_ODT_EN is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_EHCI_HCD=y
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACPWR="PH21"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_CONS_INDEX=5
CONFIG_VIDEO_LCD_POWER="PH22"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_UNZIP=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPI_FLASH_XMC=y
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPI_FLASH_XMC=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
-CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
-CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano"
CONFIG_SPL=y
CONFIG_DRAM_ZQ=0
# CONFIG_VIDEO_SUNXI is not set
CONFIG_SPL_SPI_SUNXI=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_XTX=y
CONFIG_SPI=y
CONFIG_USB1_VBUS_PIN="PH24"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_DRAM_EMR1=0
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_MACH_SUN4I=y
CONFIG_USB2_VBUS_PIN="PH12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC0_CD_PIN=""
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_DRAM_CLK=672
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SUN8I_EMAC=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x118000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_PHY_SUN50I_USB3=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x118000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x118000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MACPWR="PD6"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SUN8I_EMAC=y
CONFIG_DRAM_CLK=624
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SUN8I_EMAC=y
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_SATAPWR="PG11"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SUN8I_EMAC=y
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_MACPWR="PD14"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_MACH_SUN50I_H616=y
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_MAX_SIZE=0xbfa0
-CONFIG_SPL_STACK=0x58000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB1_VBUS_PIN="PD12"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_CONS_INDEX=5
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_PARTITIONS is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_PINE64_DT_SELECTION=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus"
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x118000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_DRAM_ZQ=3881949
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_R_I2C_ENABLE=y
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DRAM_ODT_EN=y
CONFIG_I2C0_ENABLE=y
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_PINEPHONE_DT_SELECTION=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_DRAM_ZQ=3881949
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-haikou"
-CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
+CONFIG_ROCKCHIP_SPI_IMAGE=y
CONFIG_TARGET_PUMA_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF180000
CONFIG_DEBUG_UART_CLOCK=24000000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xff8effff
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
+CONFIG_TPL=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_REGULATOR=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_PMIC_RK8XX=y
-CONFIG_SPL_DM_REGULATOR=y
CONFIG_REGULATOR_PWM=y
-CONFIG_SPL_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_DM_RESET=y
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
CONFIG_DRAM_CLK=384
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB0_VBUS_DET="axp_vbus_detect"
CONFIG_USB1_VBUS_PIN="PH7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_CONS_INDEX=5
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
CONFIG_SPL_I2C=y
-CONFIG_SYS_PBSIZE=1024
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x118000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_USB0_ID_DET="PH11"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_AXP_DCDC5_VOLT=1200
CONFIG_USB_EHCI_HCD=y
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_I2C0_ENABLE=y
CONFIG_PREBOOT="setenv usb_pgood_delay 2000; usb start"
-CONFIG_SPL_STACK=0x54000
-CONFIG_SYS_PBSIZE=1024
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_DM_REGULATOR_FIXED=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-x96-mate"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION=y
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SUPPORT_EMMC_BOOT=y
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
-CONFIG_SPL_STACK=0x8000
-CONFIG_SYS_PBSIZE=1024
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
return pclk;
}
-long long clk_get_parent_rate(struct clk *clk)
+ulong clk_get_parent_rate(struct clk *clk)
{
const struct clk_ops *ops;
struct clk *pclk;
return ops->round_rate(clk, rate);
}
+static void clk_get_priv(struct clk *clk, struct clk **clkp)
+{
+ *clkp = clk;
+
+ /* get private clock struct associated to the provided clock */
+ if (CONFIG_IS_ENABLED(CLK_CCF)) {
+ /* Take id 0 as a non-valid clk, such as dummy */
+ if (clk->id)
+ clk_get_by_id(clk->id, clkp);
+ }
+}
+
+/* clean cache, called with private clock struct */
static void clk_clean_rate_cache(struct clk *clk)
{
struct udevice *child_dev;
ulong clk_set_rate(struct clk *clk, ulong rate)
{
const struct clk_ops *ops;
+ struct clk *clkp;
debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate);
if (!clk_valid(clk))
if (!ops->set_rate)
return -ENOSYS;
+ /* get private clock struct used for cache */
+ clk_get_priv(clk, &clkp);
/* Clean up cached rates for us and all child clocks */
- clk_clean_rate_cache(clk);
+ clk_clean_rate_cache(clkp);
return ops->set_rate(clk, rate);
}
error = DIV_ROUND_CLOSEST_ULL(f * inv_ratio, r * od);
/* The lower 16 bits are spurious */
- error = abs((error - BIT(32))) >> 16;
+ error = abs64((error - BIT_ULL(32))) >> 16;
if (error < best_error) {
best->r = r;
#define RK3036_PLLCON1_DSMPD_SHIFT 12
#define RK3036_PLLCON2_FRAC_MASK 0xffffff
#define RK3036_PLLCON2_FRAC_SHIFT 0
-#define RK3036_PLLCON1_PWRDOWN_SHIT 13
+#define RK3036_PLLCON1_PWRDOWN_SHIFT 13
#define MHZ 1000000
#define KHZ 1000
/* Power down */
rk_setreg(base + pll->con_offset + 0x4,
- 1 << RK3036_PLLCON1_PWRDOWN_SHIT);
+ 1 << RK3036_PLLCON1_PWRDOWN_SHIFT);
rk_clrsetreg(base + pll->con_offset,
(RK3036_PLLCON0_POSTDIV1_MASK |
/* Power Up */
rk_clrreg(base + pll->con_offset + 0x4,
- 1 << RK3036_PLLCON1_PWRDOWN_SHIT);
+ 1 << RK3036_PLLCON1_PWRDOWN_SHIFT);
/* waiting for pll lock */
while (!(readl(base + pll->con_offset + 0x4) & (1 << pll->lock_shift)))
switch (set_rate) {
case 50 * MHz:
dpll_cfg = (struct pll_div)
- {.refdiv = 1, .fbdiv = 12, .postdiv1 = 3, .postdiv2 = 2};
+ {.refdiv = 2, .fbdiv = 75, .postdiv1 = 3, .postdiv2 = 6};
break;
case 200 * MHz:
dpll_cfg = (struct pll_div)
#else
{ "uart0", 5 }, /* PE0-PE1 */
#endif
+ { "uart1", 5 }, /* PA0-PA3 */
};
static const struct sunxi_pinctrl_desc __maybe_unused suniv_f1c100s_pinctrl_desc = {
initialization, configurations and etc.
config RAM_PX30_DDR4
- bool "DDR3 support for Rockchip PX30"
+ bool "DDR4 support for Rockchip PX30"
depends on RAM_ROCKCHIP && ROCKCHIP_PX30
help
This enables DDR4 sdram support instead of the default DDR3 support
*
* Return: clock rate in Hz, or -ve error code.
*/
-long long clk_get_parent_rate(struct clk *clk);
+ulong clk_get_parent_rate(struct clk *clk);
/**
* clk_round_rate() - Adjust a rate to the exact rate a clock can provide
return ERR_PTR(-ENOSYS);
}
-static inline long long clk_get_parent_rate(struct clk *clk)
+static inline ulong clk_get_parent_rate(struct clk *clk)
{
return -ENOSYS;
}
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000))
-#elif defined(CONFIG_MACH_SUN8I_V3S)
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
+/*
+ * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
+ * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
+ */
+#define BOOTM_SIZE __stringify(0xa000000)
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
/*
* 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
* 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))
-#elif defined(CONFIG_MACH_SUNIV)
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
/*
- * 32M RAM minus 1MB heap + 8MB for u-boot, stack, fb, etc.
- * 8M uncompressed kernel, 4M compressed kernel, 512K fdt,
- * 512K script, 512K pxe and the ramdisk at the end.
+ * 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
+ * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
+ * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
*/
#define BOOTM_SIZE __stringify(0x1700000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0500000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(0C00000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(0C50000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(0D00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(0D50000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(0D60000))
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1d50000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1d40000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1d00000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1800000))
#else
-/*
- * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
- * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#define BOOTM_SIZE __stringify(0xa000000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
+#error Need at least 32MB of DRAM. Please adjust load addresses.
#endif
#define MEM_LAYOUT_ENV_SETTINGS \
#define CLK_W1 12
#define CLK_R_APB2_RSB 13
+#define CLK_R_APB1_RTC 14
#endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
#define CLK_BUS_TVE0 125
#define CLK_HDCP 126
#define CLK_BUS_HDCP 127
+#define CLK_PLL_SYSTEM_32K 128
#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+
+#ifndef _DT_BINDINGS_CLK_SUN6I_RTC_H_
+#define _DT_BINDINGS_CLK_SUN6I_RTC_H_
+
+#define CLK_OSC32K 0
+#define CLK_OSC32K_FANOUT 1
+#define CLK_IOSC 2
+
+#endif /* _DT_BINDINGS_CLK_SUN6I_RTC_H_ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_POWER_RK3568_POWER_H__
+#define __DT_BINDINGS_POWER_RK3568_POWER_H__
+
+/* VD_CORE */
+#define RK3568_PD_CPU_0 0
+#define RK3568_PD_CPU_1 1
+#define RK3568_PD_CPU_2 2
+#define RK3568_PD_CPU_3 3
+#define RK3568_PD_CORE_ALIVE 4
+
+/* VD_PMU */
+#define RK3568_PD_PMU 5
+
+/* VD_NPU */
+#define RK3568_PD_NPU 6
+
+/* VD_GPU */
+#define RK3568_PD_GPU 7
+
+/* VD_LOGIC */
+#define RK3568_PD_VI 8
+#define RK3568_PD_VO 9
+#define RK3568_PD_RGA 10
+#define RK3568_PD_VPU 11
+#define RK3568_PD_CENTER 12
+#define RK3568_PD_RKVDEC 13
+#define RK3568_PD_RKVENC 14
+#define RK3568_PD_PIPE 15
+#define RK3568_PD_LOGIC_ALIVE 16
+
+#endif
error = DIV_ROUND_CLOSEST_ULL(f * inv_ratio,
r * od);
/* The lower 16 bits are spurious */
- error = abs((error - BIT(32))) >> 16;
+ error = abs64((error - BIT_ULL(32))) >> 16;
if (error < best_error) {
best->r = r;
best->f = f;
git.openpandora.org / pandora-u-boot.git / commitdiff