OMAP: DMA: Convert DMA library into platform driver
authorG, Manjunath Kondaiah <manjugk@ti.com>
Tue, 21 Dec 2010 02:27:19 +0000 (18:27 -0800)
committerTony Lindgren <tony@atomide.com>
Tue, 21 Dec 2010 02:38:31 +0000 (18:38 -0800)
Convert DMA library into DMA platform driver and make use of
platform data provided by hwmod data base for OMAP2+ onwards.

For OMAP1 processors, the DMA driver in mach-omap uses resource
structures for getting platform data.

Thanks to Tony Lindgren <tony@atomide.com> for fixing various
omap1 issues and testing the same on OSK5912 board.

Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap1/Makefile
arch/arm/mach-omap1/dma.c
arch/arm/mach-omap2/Makefile
arch/arm/mach-omap2/dma.c
arch/arm/plat-omap/dma.c
arch/arm/plat-omap/include/plat/dma.h

index 0b1c07f..6ee1950 100644 (file)
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
index 120eff7..d855934 100644 (file)
 #include <plat/irqs.h>
 
 #define OMAP1_DMA_BASE                 (0xfffed800)
+#define OMAP1_LOGICAL_DMA_CH_COUNT     17
+#define OMAP1_DMA_STRIDE               0x40
+
+static u32 errata;
+static u32 enable_1510_mode;
+static u8 dma_stride;
+static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
+
+static u16 reg_map[] = {
+       [GCR]           = 0x400,
+       [GSCR]          = 0x404,
+       [GRST1]         = 0x408,
+       [HW_ID]         = 0x442,
+       [PCH2_ID]       = 0x444,
+       [PCH0_ID]       = 0x446,
+       [PCH1_ID]       = 0x448,
+       [PCHG_ID]       = 0x44a,
+       [PCHD_ID]       = 0x44c,
+       [CAPS_0]        = 0x44e,
+       [CAPS_1]        = 0x452,
+       [CAPS_2]        = 0x456,
+       [CAPS_3]        = 0x458,
+       [CAPS_4]        = 0x45a,
+       [PCH2_SR]       = 0x460,
+       [PCH0_SR]       = 0x480,
+       [PCH1_SR]       = 0x482,
+       [PCHD_SR]       = 0x4c0,
+
+       /* Common Registers */
+       [CSDP]          = 0x00,
+       [CCR]           = 0x02,
+       [CICR]          = 0x04,
+       [CSR]           = 0x06,
+       [CEN]           = 0x10,
+       [CFN]           = 0x12,
+       [CSFI]          = 0x14,
+       [CSEI]          = 0x16,
+       [CPC]           = 0x18, /* 15xx only */
+       [CSAC]          = 0x18,
+       [CDAC]          = 0x1a,
+       [CDEI]          = 0x1c,
+       [CDFI]          = 0x1e,
+       [CLNK_CTRL]     = 0x28,
+
+       /* Channel specific register offsets */
+       [CSSA]          = 0x08,
+       [CDSA]          = 0x0c,
+       [COLOR]         = 0x20,
+       [CCR2]          = 0x24,
+       [LCH_CTRL]      = 0x2a,
+};
 
 static struct resource res[] __initdata = {
        [0] = {
@@ -67,6 +118,7 @@ static struct resource res[] __initdata = {
                .start  = INT_DMA_CH5,
                .flags  = IORESOURCE_IRQ,
        },
+       /* Handled in lcd_dma.c */
        [7] = {
                .name   = "6",
                .start  = INT_1610_DMA_CH6,
@@ -125,9 +177,100 @@ static struct resource res[] __initdata = {
        },
 };
 
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+       u8  stride;
+       u32 offset;
+
+       stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+       offset = reg_map[reg] + (stride * lch);
+
+       __raw_writew(val, dma_base + offset);
+       if ((reg > CLNK_CTRL && reg < CCEN) ||
+                       (reg > PCHD_ID && reg < CAPS_2)) {
+               u32 offset2 = reg_map[reg] + 2 + (stride * lch);
+               __raw_writew(val >> 16, dma_base + offset2);
+       }
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+       u8 stride;
+       u32 offset, val;
+
+       stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+       offset = reg_map[reg] + (stride * lch);
+
+       val = __raw_readw(dma_base + offset);
+       if ((reg > CLNK_CTRL && reg < CCEN) ||
+                       (reg > PCHD_ID && reg < CAPS_2)) {
+               u16 upper;
+               u32 offset2 = reg_map[reg] + 2 + (stride * lch);
+               upper = __raw_readw(dma_base + offset2);
+               val |= (upper << 16);
+       }
+       return val;
+}
+
+static void omap1_clear_lch_regs(int lch)
+{
+       int i = dma_common_ch_start;
+
+       for (; i <= dma_common_ch_end; i += 1)
+               dma_write(0, i, lch);
+}
+
+static void omap1_clear_dma(int lch)
+{
+       u32 l;
+
+       l = dma_read(CCR, lch);
+       l &= ~OMAP_DMA_CCR_EN;
+       dma_write(l, CCR, lch);
+
+       /* Clear pending interrupts */
+       l = dma_read(CSR, lch);
+}
+
+static void omap1_show_dma_caps(void)
+{
+       if (enable_1510_mode) {
+               printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
+       } else {
+               u16 w;
+               printk(KERN_INFO "OMAP DMA hardware version %d\n",
+                                                       dma_read(HW_ID, 0));
+               printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
+                       dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
+                       dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
+                       dma_read(CAPS_4, 0));
+
+               /* Disable OMAP 3.0/3.1 compatibility mode. */
+               w = dma_read(GSCR, 0);
+               w |= 1 << 3;
+               dma_write(w, GSCR, 0);
+       }
+       return;
+}
+
+static u32 configure_dma_errata(void)
+{
+
+       /*
+        * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+        * read before the DMA controller finished disabling the channel.
+        */
+       if (!cpu_is_omap15xx())
+               SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+       return errata;
+}
+
 static int __init omap1_system_dma_init(void)
 {
        struct omap_system_dma_plat_info        *p;
+       struct omap_dma_dev_attr                *d;
        struct platform_device                  *pdev;
        int ret;
 
@@ -138,6 +281,12 @@ static int __init omap1_system_dma_init(void)
                return -ENOMEM;
        }
 
+       dma_base = ioremap(res[0].start, resource_size(&res[0]));
+       if (!dma_base) {
+               pr_err("%s: Unable to ioremap\n", __func__);
+               return -ENODEV;
+       }
+
        ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
        if (ret) {
                dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
@@ -153,22 +302,84 @@ static int __init omap1_system_dma_init(void)
                goto exit_device_put;
        }
 
+       d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
+       if (!d) {
+               dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
+                       __func__, pdev->name);
+               ret = -ENOMEM;
+               goto exit_release_p;
+       }
+
+       d->lch_count            = OMAP1_LOGICAL_DMA_CH_COUNT;
+
+       /* Valid attributes for omap1 plus processors */
+       if (cpu_is_omap15xx())
+               d->dev_caps = ENABLE_1510_MODE;
+       enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+
+       d->dev_caps             |= SRC_PORT;
+       d->dev_caps             |= DST_PORT;
+       d->dev_caps             |= SRC_INDEX;
+       d->dev_caps             |= DST_INDEX;
+       d->dev_caps             |= IS_BURST_ONLY4;
+       d->dev_caps             |= CLEAR_CSR_ON_READ;
+       d->dev_caps             |= IS_WORD_16;
+
+
+       d->chan = kzalloc(sizeof(struct omap_dma_lch) *
+                                       (d->lch_count), GFP_KERNEL);
+       if (!d->chan) {
+               dev_err(&pdev->dev, "%s: Memory allocation failed"
+                                       "for d->chan!!!\n", __func__);
+               goto exit_release_d;
+       }
+
+       if (cpu_is_omap15xx())
+               d->chan_count = 9;
+       else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+               if (!(d->dev_caps & ENABLE_1510_MODE))
+                       d->chan_count = 16;
+               else
+                       d->chan_count = 9;
+       }
+
+       p->dma_attr = d;
+
+       p->show_dma_caps        = omap1_show_dma_caps;
+       p->clear_lch_regs       = omap1_clear_lch_regs;
+       p->clear_dma            = omap1_clear_dma;
+       p->dma_write            = dma_write;
+       p->dma_read             = dma_read;
+       p->disable_irq_lch      = NULL;
+
+       p->errata = configure_dma_errata();
+
        ret = platform_device_add_data(pdev, p, sizeof(*p));
        if (ret) {
                dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
                        __func__, pdev->name, pdev->id);
-               goto exit_device_put;
+               goto exit_release_chan;
        }
 
        ret = platform_device_add(pdev);
        if (ret) {
                dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
                        __func__, pdev->name, pdev->id);
-               goto exit_device_put;
+               goto exit_release_chan;
        }
 
+       dma_stride              = OMAP1_DMA_STRIDE;
+       dma_common_ch_start     = CPC;
+       dma_common_ch_end       = COLOR;
+
        return ret;
 
+exit_release_chan:
+       kfree(d->chan);
+exit_release_d:
+       kfree(d);
+exit_release_p:
+       kfree(p);
 exit_device_put:
        platform_device_put(pdev);
 exit_device_del:
index 25bc945..1538e32 100644 (file)
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
-        common.o gpio.o
+        common.o gpio.o dma.o
 
 omap-2-3-common                                = irq.o sdrc.o prm2xxx_3xxx.o
 hwmod-common                           = omap_hwmod.o \
index 2130059..d2f15f5 100644 (file)
 #include <plat/omap_device.h>
 #include <plat/dma.h>
 
+#define OMAP2_DMA_STRIDE       0x60
+
+static u32 errata;
+static u8 dma_stride;
+
+static struct omap_dma_dev_attr *d;
+
+static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
+
+static u16 reg_map[] = {
+       [REVISION]              = 0x00,
+       [GCR]                   = 0x78,
+       [IRQSTATUS_L0]          = 0x08,
+       [IRQSTATUS_L1]          = 0x0c,
+       [IRQSTATUS_L2]          = 0x10,
+       [IRQSTATUS_L3]          = 0x14,
+       [IRQENABLE_L0]          = 0x18,
+       [IRQENABLE_L1]          = 0x1c,
+       [IRQENABLE_L2]          = 0x20,
+       [IRQENABLE_L3]          = 0x24,
+       [SYSSTATUS]             = 0x28,
+       [OCP_SYSCONFIG]         = 0x2c,
+       [CAPS_0]                = 0x64,
+       [CAPS_2]                = 0x6c,
+       [CAPS_3]                = 0x70,
+       [CAPS_4]                = 0x74,
+
+       /* Common register offsets */
+       [CCR]                   = 0x80,
+       [CLNK_CTRL]             = 0x84,
+       [CICR]                  = 0x88,
+       [CSR]                   = 0x8c,
+       [CSDP]                  = 0x90,
+       [CEN]                   = 0x94,
+       [CFN]                   = 0x98,
+       [CSEI]                  = 0xa4,
+       [CSFI]                  = 0xa8,
+       [CDEI]                  = 0xac,
+       [CDFI]                  = 0xb0,
+       [CSAC]                  = 0xb4,
+       [CDAC]                  = 0xb8,
+
+       /* Channel specific register offsets */
+       [CSSA]                  = 0x9c,
+       [CDSA]                  = 0xa0,
+       [CCEN]                  = 0xbc,
+       [CCFN]                  = 0xc0,
+       [COLOR]                 = 0xc4,
+
+       /* OMAP4 specific registers */
+       [CDP]                   = 0xd0,
+       [CNDP]                  = 0xd4,
+       [CCDN]                  = 0xd8,
+};
+
 static struct omap_device_pm_latency omap2_dma_latency[] = {
        {
                .deactivate_func = omap_device_idle_hwmods,
@@ -40,13 +95,151 @@ static struct omap_device_pm_latency omap2_dma_latency[] = {
        },
 };
 
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+       u8  stride;
+       u32 offset;
+
+       stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+       offset = reg_map[reg] + (stride * lch);
+       __raw_writel(val, dma_base + offset);
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+       u8 stride;
+       u32 offset, val;
+
+       stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+       offset = reg_map[reg] + (stride * lch);
+       val = __raw_readl(dma_base + offset);
+       return val;
+}
+
+static inline void omap2_disable_irq_lch(int lch)
+{
+       u32 val;
+
+       val = dma_read(IRQENABLE_L0, lch);
+       val &= ~(1 << lch);
+       dma_write(val, IRQENABLE_L0, lch);
+}
+
+static void omap2_clear_dma(int lch)
+{
+       int i = dma_common_ch_start;
+
+       for (; i <= dma_common_ch_end; i += 1)
+               dma_write(0, i, lch);
+}
+
+static void omap2_show_dma_caps(void)
+{
+       u8 revision = dma_read(REVISION, 0) & 0xff;
+       printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+                               revision >> 4, revision & 0xf);
+       return;
+}
+
+static u32 configure_dma_errata(void)
+{
+
+       /*
+        * Errata applicable for OMAP2430ES1.0 and all omap2420
+        *
+        * I.
+        * Erratum ID: Not Available
+        * Inter Frame DMA buffering issue DMA will wrongly
+        * buffer elements if packing and bursting is enabled. This might
+        * result in data gets stalled in FIFO at the end of the block.
+        * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
+        * guarantee no data will stay in the DMA FIFO in case inter frame
+        * buffering occurs
+        *
+        * II.
+        * Erratum ID: Not Available
+        * DMA may hang when several channels are used in parallel
+        * In the following configuration, DMA channel hanging can occur:
+        * a. Channel i, hardware synchronized, is enabled
+        * b. Another channel (Channel x), software synchronized, is enabled.
+        * c. Channel i is disabled before end of transfer
+        * d. Channel i is reenabled.
+        * e. Steps 1 to 4 are repeated a certain number of times.
+        * f. A third channel (Channel y), software synchronized, is enabled.
+        * Channel x and Channel y may hang immediately after step 'f'.
+        * Workaround:
+        * For any channel used - make sure NextLCH_ID is set to the value j.
+        */
+       if (cpu_is_omap2420() || (cpu_is_omap2430() &&
+                               (omap_type() == OMAP2430_REV_ES1_0))) {
+
+               SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
+               SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
+       }
+
+       /*
+        * Erratum ID: i378: OMAP2+: sDMA Channel is not disabled
+        * after a transaction error.
+        * Workaround: SW should explicitely disable the channel.
+        */
+       if (cpu_class_is_omap2())
+               SET_DMA_ERRATA(DMA_ERRATA_i378);
+
+       /*
+        * Erratum ID: i541: sDMA FIFO draining does not finish
+        * If sDMA channel is disabled on the fly, sDMA enters standby even
+        * through FIFO Drain is still in progress
+        * Workaround: Put sDMA in NoStandby more before a logical channel is
+        * disabled, then put it back to SmartStandby right after the channel
+        * finishes FIFO draining.
+        */
+       if (cpu_is_omap34xx())
+               SET_DMA_ERRATA(DMA_ERRATA_i541);
+
+       /*
+        * Erratum ID: i88 : Special programming model needed to disable DMA
+        * before end of block.
+        * Workaround: software must ensure that the DMA is configured in No
+        * Standby mode(DMAx_OCP_SYSCONFIG.MIDLEMODE = "01")
+        */
+       if (omap_type() == OMAP3430_REV_ES1_0)
+               SET_DMA_ERRATA(DMA_ERRATA_i88);
+
+       /*
+        * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+        * read before the DMA controller finished disabling the channel.
+        */
+       SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+       /*
+        * Erratum ID: Not Available
+        * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+        * after secure sram context save and restore.
+        * Work around: Hence we need to manually clear those IRQs to avoid
+        * spurious interrupts. This affects only secure devices.
+        */
+       if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+               SET_DMA_ERRATA(DMA_ROMCODE_BUG);
+
+       return errata;
+}
+
 /* One time initializations */
 static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 {
        struct omap_device                      *od;
        struct omap_system_dma_plat_info        *p;
+       struct resource                         *mem;
        char                                    *name = "omap_dma_system";
 
+       dma_stride              = OMAP2_DMA_STRIDE;
+       dma_common_ch_start     = CSDP;
+       if (cpu_is_omap3630() || cpu_is_omap4430())
+               dma_common_ch_end = CCDN;
+       else
+               dma_common_ch_end = CCFN;
+
        p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
        if (!p) {
                pr_err("%s: Unable to allocate pdata for %s:%s\n",
@@ -54,6 +247,17 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
                return -ENOMEM;
        }
 
+       p->dma_attr             = (struct omap_dma_dev_attr *)oh->dev_attr;
+       p->disable_irq_lch      = omap2_disable_irq_lch;
+       p->show_dma_caps        = omap2_show_dma_caps;
+       p->clear_dma            = omap2_clear_dma;
+       p->dma_write            = dma_write;
+       p->dma_read             = dma_read;
+
+       p->clear_lch_regs       = NULL;
+
+       p->errata               = configure_dma_errata();
+
        od = omap_device_build(name, 0, oh, p, sizeof(*p),
                        omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
        kfree(p);
@@ -63,6 +267,25 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
                return IS_ERR(od);
        }
 
+       mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+       if (!mem) {
+               dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+               return -EINVAL;
+       }
+       dma_base = ioremap(mem->start, resource_size(mem));
+       if (!dma_base) {
+               dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+               return -ENOMEM;
+       }
+
+       d = oh->dev_attr;
+       d->chan = kzalloc(sizeof(struct omap_dma_lch) *
+                                       (d->lch_count), GFP_KERNEL);
+
+       if (!d->chan) {
+               dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+               return -ENOMEM;
+       }
        return 0;
 }
 
index 6f51bf3..c4b2b47 100644 (file)
  *
  * Support functions for the OMAP internal DMA channels.
  *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into DMA platform driver.
+ *     - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 
 #undef DEBUG
 
-static u16 reg_map_omap1[] = {
-       [GCR]           = 0x400,
-       [GSCR]          = 0x404,
-       [GRST1]         = 0x408,
-       [HW_ID]         = 0x442,
-       [PCH2_ID]       = 0x444,
-       [PCH0_ID]       = 0x446,
-       [PCH1_ID]       = 0x448,
-       [PCHG_ID]       = 0x44a,
-       [PCHD_ID]       = 0x44c,
-       [CAPS_0]        = 0x44e,
-       [CAPS_1]        = 0x452,
-       [CAPS_2]        = 0x456,
-       [CAPS_3]        = 0x458,
-       [CAPS_4]        = 0x45a,
-       [PCH2_SR]       = 0x460,
-       [PCH0_SR]       = 0x480,
-       [PCH1_SR]       = 0x482,
-       [PCHD_SR]       = 0x4c0,
-
-       /* Common Registers */
-       [CSDP]          = 0x00,
-       [CCR]           = 0x02,
-       [CICR]          = 0x04,
-       [CSR]           = 0x06,
-       [CEN]           = 0x10,
-       [CFN]           = 0x12,
-       [CSFI]          = 0x14,
-       [CSEI]          = 0x16,
-       [CPC]           = 0x18, /* 15xx only */
-       [CSAC]          = 0x18,
-       [CDAC]          = 0x1a,
-       [CDEI]          = 0x1c,
-       [CDFI]          = 0x1e,
-       [CLNK_CTRL]     = 0x28,
-
-       /* Channel specific register offsets */
-       [CSSA]          = 0x08,
-       [CDSA]          = 0x0c,
-       [COLOR]         = 0x20,
-       [CCR2]          = 0x24,
-       [LCH_CTRL]      = 0x2a,
-};
-
-static u16 reg_map_omap2[] = {
-       [REVISION]              = 0x00,
-       [GCR]                   = 0x78,
-       [IRQSTATUS_L0]          = 0x08,
-       [IRQSTATUS_L1]          = 0x0c,
-       [IRQSTATUS_L2]          = 0x10,
-       [IRQSTATUS_L3]          = 0x14,
-       [IRQENABLE_L0]          = 0x18,
-       [IRQENABLE_L1]          = 0x1c,
-       [IRQENABLE_L2]          = 0x20,
-       [IRQENABLE_L3]          = 0x24,
-       [SYSSTATUS]             = 0x28,
-       [OCP_SYSCONFIG]         = 0x2c,
-       [CAPS_0]                = 0x64,
-       [CAPS_2]                = 0x6c,
-       [CAPS_3]                = 0x70,
-       [CAPS_4]                = 0x74,
-
-       /* Common register offsets */
-       [CCR]                   = 0x80,
-       [CLNK_CTRL]             = 0x84,
-       [CICR]                  = 0x88,
-       [CSR]                   = 0x8c,
-       [CSDP]                  = 0x90,
-       [CEN]                   = 0x94,
-       [CFN]                   = 0x98,
-       [CSEI]                  = 0xa4,
-       [CSFI]                  = 0xa8,
-       [CDEI]                  = 0xac,
-       [CDFI]                  = 0xb0,
-       [CSAC]                  = 0xb4,
-       [CDAC]                  = 0xb8,
-
-       /* Channel specific register offsets */
-       [CSSA]                  = 0x9c,
-       [CDSA]                  = 0xa0,
-       [CCEN]                  = 0xbc,
-       [CCFN]                  = 0xc0,
-       [COLOR]                 = 0xc4,
-
-       /* OMAP4 specific registers */
-       [CDP]                   = 0xd0,
-       [CNDP]                  = 0xd4,
-       [CCDN]                  = 0xd8,
-};
-
 #ifndef CONFIG_ARCH_OMAP1
 enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
        DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
@@ -143,6 +57,9 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 
 #define OMAP_FUNC_MUX_ARM_BASE         (0xfffe1000 + 0xec)
 
+static struct omap_system_dma_plat_info *p;
+static struct omap_dma_dev_attr *d;
+
 static int enable_1510_mode;
 static u32 errata;
 
@@ -152,27 +69,6 @@ static struct omap_dma_global_context_registers {
        u32 dma_gcr;
 } omap_dma_global_context;
 
-struct omap_dma_lch {
-       int next_lch;
-       int dev_id;
-       u16 saved_csr;
-       u16 enabled_irqs;
-       const char *dev_name;
-       void (*callback)(int lch, u16 ch_status, void *data);
-       void *data;
-
-#ifndef CONFIG_ARCH_OMAP1
-       /* required for Dynamic chaining */
-       int prev_linked_ch;
-       int next_linked_ch;
-       int state;
-       int chain_id;
-
-       int status;
-#endif
-       long flags;
-};
-
 struct dma_link_info {
        int *linked_dmach_q;
        int no_of_lchs_linked;
@@ -228,18 +124,6 @@ static int omap_dma_reserve_channels;
 
 static spinlock_t dma_chan_lock;
 static struct omap_dma_lch *dma_chan;
-static void __iomem *omap_dma_base;
-static u16 *reg_map;
-static u8 dma_stride;
-static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
-
-static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
-       INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
-       INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
-       INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
-       INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
-       INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
-};
 
 static inline void disable_lnk(int lch);
 static void omap_disable_channel_irq(int lch);
@@ -248,52 +132,9 @@ static inline void omap_enable_channel_irq(int lch);
 #define REVISIT_24XX()         printk(KERN_ERR "FIXME: no %s on 24xx\n", \
                                                __func__);
 
-static inline void dma_write(u32 val, int reg, int lch)
-{
-       u8  stride;
-       u32 offset;
-
-       stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-       offset = reg_map[reg] + (stride * lch);
-
-       if (dma_stride  == 0x40) {
-               __raw_writew(val, omap_dma_base + offset);
-               if ((reg > CLNK_CTRL && reg < CCEN) ||
-                               (reg > PCHD_ID && reg < CAPS_2)) {
-                       u32 offset2 = reg_map[reg] + 2 + (stride * lch);
-                       __raw_writew(val >> 16, omap_dma_base + offset2);
-               }
-       } else {
-               __raw_writel(val, omap_dma_base + offset);
-       }
-}
-
-static inline u32 dma_read(int reg, int lch)
-{
-       u8 stride;
-       u32 offset, val;
-
-       stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-       offset = reg_map[reg] + (stride * lch);
-
-       if (dma_stride  == 0x40) {
-               val = __raw_readw(omap_dma_base + offset);
-               if ((reg > CLNK_CTRL && reg < CCEN) ||
-                               (reg > PCHD_ID && reg < CAPS_2)) {
-                       u16 upper;
-                       u32 offset2 = reg_map[reg] + 2 + (stride * lch);
-                       upper = __raw_readw(omap_dma_base + offset2);
-                       val |= (upper << 16);
-               }
-       } else {
-               val = __raw_readl(omap_dma_base + offset);
-       }
-       return val;
-}
-
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-static int omap_dma_in_1510_mode(void)
+int omap_dma_in_1510_mode(void)
 {
        return enable_1510_mode;
 }
@@ -325,15 +166,6 @@ static inline void set_gdma_dev(int req, int dev)
 #define set_gdma_dev(req, dev) do {} while (0)
 #endif
 
-/* Omap1 only */
-static void clear_lch_regs(int lch)
-{
-       int i = dma_common_ch_start;
-
-       for (; i <= dma_common_ch_end; i += 1)
-               dma_write(0, i, lch);
-}
-
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
        unsigned long reg;
@@ -366,12 +198,12 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
        if (cpu_class_is_omap2()) {
                u32 ccr;
 
-               ccr = dma_read(CCR, lch);
+               ccr = p->dma_read(CCR, lch);
                if (priority)
                        ccr |= (1 << 6);
                else
                        ccr &= ~(1 << 6);
-               dma_write(ccr, CCR, lch);
+               p->dma_write(ccr, CCR, lch);
        }
 }
 EXPORT_SYMBOL(omap_set_dma_priority);
@@ -382,31 +214,31 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 {
        u32 l;
 
-       l = dma_read(CSDP, lch);
+       l = p->dma_read(CSDP, lch);
        l &= ~0x03;
        l |= data_type;
-       dma_write(l, CSDP, lch);
+       p->dma_write(l, CSDP, lch);
 
        if (cpu_class_is_omap1()) {
                u16 ccr;
 
-               ccr = dma_read(CCR, lch);
+               ccr = p->dma_read(CCR, lch);
                ccr &= ~(1 << 5);
                if (sync_mode == OMAP_DMA_SYNC_FRAME)
                        ccr |= 1 << 5;
-               dma_write(ccr, CCR, lch);
+               p->dma_write(ccr, CCR, lch);
 
-               ccr = dma_read(CCR2, lch);
+               ccr = p->dma_read(CCR2, lch);
                ccr &= ~(1 << 2);
                if (sync_mode == OMAP_DMA_SYNC_BLOCK)
                        ccr |= 1 << 2;
-               dma_write(ccr, CCR2, lch);
+               p->dma_write(ccr, CCR2, lch);
        }
 
        if (cpu_class_is_omap2() && dma_trigger) {
                u32 val;
 
-               val = dma_read(CCR, lch);
+               val = p->dma_read(CCR, lch);
 
                /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
                val &= ~((1 << 23) | (3 << 19) | 0x1f);
@@ -431,11 +263,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
                } else {
                        val &= ~(1 << 24);      /* dest synch */
                }
-               dma_write(val, CCR, lch);
+               p->dma_write(val, CCR, lch);
        }
 
-       dma_write(elem_count, CEN, lch);
-       dma_write(frame_count, CFN, lch);
+       p->dma_write(elem_count, CEN, lch);
+       p->dma_write(frame_count, CFN, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
@@ -446,7 +278,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
        if (cpu_class_is_omap1()) {
                u16 w;
 
-               w = dma_read(CCR2, lch);
+               w = p->dma_read(CCR2, lch);
                w &= ~0x03;
 
                switch (mode) {
@@ -461,22 +293,22 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
                default:
                        BUG();
                }
-               dma_write(w, CCR2, lch);
+               p->dma_write(w, CCR2, lch);
 
-               w = dma_read(LCH_CTRL, lch);
+               w = p->dma_read(LCH_CTRL, lch);
                w &= ~0x0f;
                /* Default is channel type 2D */
                if (mode) {
-                       dma_write(color, COLOR, lch);
+                       p->dma_write(color, COLOR, lch);
                        w |= 1;         /* Channel type G */
                }
-               dma_write(w, LCH_CTRL, lch);
+               p->dma_write(w, LCH_CTRL, lch);
        }
 
        if (cpu_class_is_omap2()) {
                u32 val;
 
-               val = dma_read(CCR, lch);
+               val = p->dma_read(CCR, lch);
                val &= ~((1 << 17) | (1 << 16));
 
                switch (mode) {
@@ -491,10 +323,10 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
                default:
                        BUG();
                }
-               dma_write(val, CCR, lch);
+               p->dma_write(val, CCR, lch);
 
                color &= 0xffffff;
-               dma_write(color, COLOR, lch);
+               p->dma_write(color, COLOR, lch);
        }
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
@@ -504,10 +336,10 @@ void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
        if (cpu_class_is_omap2()) {
                u32 csdp;
 
-               csdp = dma_read(CSDP, lch);
+               csdp = p->dma_read(CSDP, lch);
                csdp &= ~(0x3 << 16);
                csdp |= (mode << 16);
-               dma_write(csdp, CSDP, lch);
+               p->dma_write(csdp, CSDP, lch);
        }
 }
 EXPORT_SYMBOL(omap_set_dma_write_mode);
@@ -517,10 +349,10 @@ void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
        if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
                u32 l;
 
-               l = dma_read(LCH_CTRL, lch);
+               l = p->dma_read(LCH_CTRL, lch);
                l &= ~0x7;
                l |= mode;
-               dma_write(l, LCH_CTRL, lch);
+               p->dma_write(l, LCH_CTRL, lch);
        }
 }
 EXPORT_SYMBOL(omap_set_dma_channel_mode);
@@ -535,21 +367,21 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
        if (cpu_class_is_omap1()) {
                u16 w;
 
-               w = dma_read(CSDP, lch);
+               w = p->dma_read(CSDP, lch);
                w &= ~(0x1f << 2);
                w |= src_port << 2;
-               dma_write(w, CSDP, lch);
+               p->dma_write(w, CSDP, lch);
        }
 
-       l = dma_read(CCR, lch);
+       l = p->dma_read(CCR, lch);
        l &= ~(0x03 << 12);
        l |= src_amode << 12;
-       dma_write(l, CCR, lch);
+       p->dma_write(l, CCR, lch);
 
-       dma_write(src_start, CSSA, lch);
+       p->dma_write(src_start, CSSA, lch);
 
-       dma_write(src_ei, CSEI, lch);
-       dma_write(src_fi, CSFI, lch);
+       p->dma_write(src_ei, CSEI, lch);
+       p->dma_write(src_fi, CSFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_params);
 
@@ -577,8 +409,8 @@ void omap_set_dma_src_index(int lch, int eidx, int fidx)
        if (cpu_class_is_omap2())
                return;
 
-       dma_write(eidx, CSEI, lch);
-       dma_write(fidx, CSFI, lch);
+       p->dma_write(eidx, CSEI, lch);
+       p->dma_write(fidx, CSFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_index);
 
@@ -586,11 +418,11 @@ void omap_set_dma_src_data_pack(int lch, int enable)
 {
        u32 l;
 
-       l = dma_read(CSDP, lch);
+       l = p->dma_read(CSDP, lch);
        l &= ~(1 << 6);
        if (enable)
                l |= (1 << 6);
-       dma_write(l, CSDP, lch);
+       p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
 
@@ -599,7 +431,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
        unsigned int burst = 0;
        u32 l;
 
-       l = dma_read(CSDP, lch);
+       l = p->dma_read(CSDP, lch);
        l &= ~(0x03 << 7);
 
        switch (burst_mode) {
@@ -635,7 +467,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
        }
 
        l |= (burst << 7);
-       dma_write(l, CSDP, lch);
+       p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
 
@@ -647,21 +479,21 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
        u32 l;
 
        if (cpu_class_is_omap1()) {
-               l = dma_read(CSDP, lch);
+               l = p->dma_read(CSDP, lch);
                l &= ~(0x1f << 9);
                l |= dest_port << 9;
-               dma_write(l, CSDP, lch);
+               p->dma_write(l, CSDP, lch);
        }
 
-       l = dma_read(CCR, lch);
+       l = p->dma_read(CCR, lch);
        l &= ~(0x03 << 14);
        l |= dest_amode << 14;
-       dma_write(l, CCR, lch);
+       p->dma_write(l, CCR, lch);
 
-       dma_write(dest_start, CDSA, lch);
+       p->dma_write(dest_start, CDSA, lch);
 
-       dma_write(dst_ei, CDEI, lch);
-       dma_write(dst_fi, CDFI, lch);
+       p->dma_write(dst_ei, CDEI, lch);
+       p->dma_write(dst_fi, CDFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_params);
 
@@ -670,8 +502,8 @@ void omap_set_dma_dest_index(int lch, int eidx, int fidx)
        if (cpu_class_is_omap2())
                return;
 
-       dma_write(eidx, CDEI, lch);
-       dma_write(fidx, CDFI, lch);
+       p->dma_write(eidx, CDEI, lch);
+       p->dma_write(fidx, CDFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_index);
 
@@ -679,11 +511,11 @@ void omap_set_dma_dest_data_pack(int lch, int enable)
 {
        u32 l;
 
-       l = dma_read(CSDP, lch);
+       l = p->dma_read(CSDP, lch);
        l &= ~(1 << 13);
        if (enable)
                l |= 1 << 13;
-       dma_write(l, CSDP, lch);
+       p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 
@@ -692,7 +524,7 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
        unsigned int burst = 0;
        u32 l;
 
-       l = dma_read(CSDP, lch);
+       l = p->dma_read(CSDP, lch);
        l &= ~(0x03 << 14);
 
        switch (burst_mode) {
@@ -725,7 +557,7 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
                return;
        }
        l |= (burst << 14);
-       dma_write(l, CSDP, lch);
+       p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
@@ -735,18 +567,18 @@ static inline void omap_enable_channel_irq(int lch)
 
        /* Clear CSR */
        if (cpu_class_is_omap1())
-               status = dma_read(CSR, lch);
+               status = p->dma_read(CSR, lch);
        else if (cpu_class_is_omap2())
-               dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+               p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
 
        /* Enable some nice interrupts. */
-       dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
+       p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
 }
 
 static void omap_disable_channel_irq(int lch)
 {
        if (cpu_class_is_omap2())
-               dma_write(0, CICR, lch);
+               p->dma_write(0, CICR, lch);
 }
 
 void omap_enable_dma_irq(int lch, u16 bits)
@@ -765,7 +597,7 @@ static inline void enable_lnk(int lch)
 {
        u32 l;
 
-       l = dma_read(CLNK_CTRL, lch);
+       l = p->dma_read(CLNK_CTRL, lch);
 
        if (cpu_class_is_omap1())
                l &= ~(1 << 14);
@@ -780,18 +612,18 @@ static inline void enable_lnk(int lch)
                        l = dma_chan[lch].next_linked_ch | (1 << 15);
 #endif
 
-       dma_write(l, CLNK_CTRL, lch);
+       p->dma_write(l, CLNK_CTRL, lch);
 }
 
 static inline void disable_lnk(int lch)
 {
        u32 l;
 
-       l = dma_read(CLNK_CTRL, lch);
+       l = p->dma_read(CLNK_CTRL, lch);
 
        /* Disable interrupts */
        if (cpu_class_is_omap1()) {
-               dma_write(0, CICR, lch);
+               p->dma_write(0, CICR, lch);
                /* Set the STOP_LNK bit */
                l |= 1 << 14;
        }
@@ -802,7 +634,7 @@ static inline void disable_lnk(int lch)
                l &= ~(1 << 15);
        }
 
-       dma_write(l, CLNK_CTRL, lch);
+       p->dma_write(l, CLNK_CTRL, lch);
        dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
@@ -815,9 +647,9 @@ static inline void omap2_enable_irq_lch(int lch)
                return;
 
        spin_lock_irqsave(&dma_chan_lock, flags);
-       val = dma_read(IRQENABLE_L0, lch);
+       val = p->dma_read(IRQENABLE_L0, lch);
        val |= 1 << lch;
-       dma_write(val, IRQENABLE_L0, lch);
+       p->dma_write(val, IRQENABLE_L0, lch);
        spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
@@ -830,9 +662,9 @@ static inline void omap2_disable_irq_lch(int lch)
                return;
 
        spin_lock_irqsave(&dma_chan_lock, flags);
-       val = dma_read(IRQENABLE_L0, lch);
+       val = p->dma_read(IRQENABLE_L0, lch);
        val &= ~(1 << lch);
-       dma_write(val, IRQENABLE_L0, lch);
+       p->dma_write(val, IRQENABLE_L0, lch);
        spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
@@ -859,8 +691,8 @@ int omap_request_dma(int dev_id, const char *dev_name,
        chan = dma_chan + free_ch;
        chan->dev_id = dev_id;
 
-       if (cpu_class_is_omap1())
-               clear_lch_regs(free_ch);
+       if (p->clear_lch_regs)
+               p->clear_lch_regs(free_ch);
 
        if (cpu_class_is_omap2())
                omap_clear_dma(free_ch);
@@ -897,17 +729,17 @@ int omap_request_dma(int dev_id, const char *dev_name,
                 * Disable the 1510 compatibility mode and set the sync device
                 * id.
                 */
-               dma_write(dev_id | (1 << 10), CCR, free_ch);
+               p->dma_write(dev_id | (1 << 10), CCR, free_ch);
        } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
-               dma_write(dev_id, CCR, free_ch);
+               p->dma_write(dev_id, CCR, free_ch);
        }
 
        if (cpu_class_is_omap2()) {
                omap2_enable_irq_lch(free_ch);
                omap_enable_channel_irq(free_ch);
                /* Clear the CSR register and IRQ status register */
-               dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
-               dma_write(1 << free_ch, IRQSTATUS_L0, 0);
+               p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
+               p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
        }
 
        *dma_ch_out = free_ch;
@@ -928,23 +760,23 @@ void omap_free_dma(int lch)
 
        if (cpu_class_is_omap1()) {
                /* Disable all DMA interrupts for the channel. */
-               dma_write(0, CICR, lch);
+               p->dma_write(0, CICR, lch);
                /* Make sure the DMA transfer is stopped. */
-               dma_write(0, CCR, lch);
+               p->dma_write(0, CCR, lch);
        }
 
        if (cpu_class_is_omap2()) {
                omap2_disable_irq_lch(lch);
 
                /* Clear the CSR register and IRQ status register */
-               dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
-               dma_write(1 << lch, IRQSTATUS_L0, lch);
+               p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+               p->dma_write(1 << lch, IRQSTATUS_L0, lch);
 
                /* Disable all DMA interrupts for the channel. */
-               dma_write(0, CICR, lch);
+               p->dma_write(0, CICR, lch);
 
                /* Make sure the DMA transfer is stopped. */
-               dma_write(0, CCR, lch);
+               p->dma_write(0, CCR, lch);
                omap_clear_dma(lch);
        }
 
@@ -985,7 +817,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
        reg |= (0x3 & tparams) << 12;
        reg |= (arb_rate & 0xff) << 16;
 
-       dma_write(reg, GCR, 0);
+       p->dma_write(reg, GCR, 0);
 }
 EXPORT_SYMBOL(omap_dma_set_global_params);
 
@@ -1008,14 +840,14 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
                printk(KERN_ERR "Invalid channel id\n");
                return -EINVAL;
        }
-       l = dma_read(CCR, lch);
+       l = p->dma_read(CCR, lch);
        l &= ~((1 << 6) | (1 << 26));
        if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
                l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
        else
                l |= ((read_prio & 0x1) << 6);
 
-       dma_write(l, CCR, lch);
+       p->dma_write(l, CCR, lch);
 
        return 0;
 }
@@ -1030,24 +862,7 @@ void omap_clear_dma(int lch)
        unsigned long flags;
 
        local_irq_save(flags);
-
-       if (cpu_class_is_omap1()) {
-               u32 l;
-
-               l = dma_read(CCR, lch);
-               l &= ~OMAP_DMA_CCR_EN;
-               dma_write(l, CCR, lch);
-
-               /* Clear pending interrupts */
-               l = dma_read(CSR, lch);
-       }
-
-       if (cpu_class_is_omap2()) {
-               int i = dma_common_ch_start;
-               for (; i <= dma_common_ch_end; i += 1)
-                       dma_write(0, i, lch);
-       }
-
+       p->clear_dma(lch);
        local_irq_restore(flags);
 }
 EXPORT_SYMBOL(omap_clear_dma);
@@ -1061,13 +876,13 @@ void omap_start_dma(int lch)
         * before starting dma transfer.
         */
        if (cpu_is_omap15xx())
-               dma_write(0, CPC, lch);
+               p->dma_write(0, CPC, lch);
        else
-               dma_write(0, CDAC, lch);
+               p->dma_write(0, CDAC, lch);
 
        if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
                int next_lch, cur_lch;
-               char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+               char dma_chan_link_map[dma_lch_count];
 
                dma_chan_link_map[lch] = 1;
                /* Set the link register of the first channel */
@@ -1090,17 +905,17 @@ void omap_start_dma(int lch)
                        cur_lch = next_lch;
                } while (next_lch != -1);
        } else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
-               dma_write(lch, CLNK_CTRL, lch);
+               p->dma_write(lch, CLNK_CTRL, lch);
 
        omap_enable_channel_irq(lch);
 
-       l = dma_read(CCR, lch);
+       l = p->dma_read(CCR, lch);
 
        if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
                        l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
        l |= OMAP_DMA_CCR_EN;
 
-       dma_write(l, CCR, lch);
+       p->dma_write(l, CCR, lch);
 
        dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
@@ -1112,46 +927,46 @@ void omap_stop_dma(int lch)
 
        /* Disable all interrupts on the channel */
        if (cpu_class_is_omap1())
-               dma_write(0, CICR, lch);
+               p->dma_write(0, CICR, lch);
 
-       l = dma_read(CCR, lch);
+       l = p->dma_read(CCR, lch);
        if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
                        (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
                int i = 0;
                u32 sys_cf;
 
                /* Configure No-Standby */
-               l = dma_read(OCP_SYSCONFIG, lch);
+               l = p->dma_read(OCP_SYSCONFIG, lch);
                sys_cf = l;
                l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
                l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
-               dma_write(l , OCP_SYSCONFIG, 0);
+               p->dma_write(l , OCP_SYSCONFIG, 0);
 
-               l = dma_read(CCR, lch);
+               l = p->dma_read(CCR, lch);
                l &= ~OMAP_DMA_CCR_EN;
-               dma_write(l, CCR, lch);
+               p->dma_write(l, CCR, lch);
 
                /* Wait for sDMA FIFO drain */
-               l = dma_read(CCR, lch);
+               l = p->dma_read(CCR, lch);
                while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
                                        OMAP_DMA_CCR_WR_ACTIVE))) {
                        udelay(5);
                        i++;
-                       l = dma_read(CCR, lch);
+                       l = p->dma_read(CCR, lch);
                }
                if (i >= 100)
                        printk(KERN_ERR "DMA drain did not complete on "
                                        "lch %d\n", lch);
                /* Restore OCP_SYSCONFIG */
-               dma_write(sys_cf, OCP_SYSCONFIG, lch);
+               p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
        } else {
                l &= ~OMAP_DMA_CCR_EN;
-               dma_write(l, CCR, lch);
+               p->dma_write(l, CCR, lch);
        }
 
        if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
                int next_lch, cur_lch = lch;
-               char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+               char dma_chan_link_map[dma_lch_count];
 
                memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
                do {
@@ -1212,15 +1027,15 @@ dma_addr_t omap_get_dma_src_pos(int lch)
        dma_addr_t offset = 0;
 
        if (cpu_is_omap15xx())
-               offset = dma_read(CPC, lch);
+               offset = p->dma_read(CPC, lch);
        else
-               offset = dma_read(CSAC, lch);
+               offset = p->dma_read(CSAC, lch);
 
        if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
-               offset = dma_read(CSAC, lch);
+               offset = p->dma_read(CSAC, lch);
 
        if (cpu_class_is_omap1())
-               offset |= (dma_read(CSSA, lch) & 0xFFFF0000);
+               offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
 
        return offset;
 }
@@ -1239,19 +1054,19 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
        dma_addr_t offset = 0;
 
        if (cpu_is_omap15xx())
-               offset = dma_read(CPC, lch);
+               offset = p->dma_read(CPC, lch);
        else
-               offset = dma_read(CDAC, lch);
+               offset = p->dma_read(CDAC, lch);
 
        /*
         * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
         * read before the DMA controller finished disabling the channel.
         */
        if (!cpu_is_omap15xx() && offset == 0)
-               offset = dma_read(CDAC, lch);
+               offset = p->dma_read(CDAC, lch);
 
        if (cpu_class_is_omap1())
-               offset |= (dma_read(CDSA, lch) & 0xFFFF0000);
+               offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
 
        return offset;
 }
@@ -1259,7 +1074,7 @@ EXPORT_SYMBOL(omap_get_dma_dst_pos);
 
 int omap_get_dma_active_status(int lch)
 {
-       return (dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
+       return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
 }
 EXPORT_SYMBOL(omap_get_dma_active_status);
 
@@ -1272,7 +1087,7 @@ int omap_dma_running(void)
                        return 1;
 
        for (lch = 0; lch < dma_chan_count; lch++)
-               if (dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
+               if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
                        return 1;
 
        return 0;
@@ -1287,7 +1102,7 @@ void omap_dma_link_lch(int lch_head, int lch_queue)
 {
        if (omap_dma_in_1510_mode()) {
                if (lch_head == lch_queue) {
-                       dma_write(dma_read(CCR, lch_head) | (3 << 8),
+                       p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
                                                                CCR, lch_head);
                        return;
                }
@@ -1314,7 +1129,7 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
        if (omap_dma_in_1510_mode()) {
                if (lch_head == lch_queue) {
-                       dma_write(dma_read(CCR, lch_head) & ~(3 << 8),
+                       p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8),
                                                                CCR, lch_head);
                        return;
                }
@@ -1341,8 +1156,6 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 }
 EXPORT_SYMBOL(omap_dma_unlink_lch);
 
-/*----------------------------------------------------------------------------*/
-
 #ifndef CONFIG_ARCH_OMAP1
 /* Create chain of DMA channesls */
 static void create_dma_lch_chain(int lch_head, int lch_queue)
@@ -1367,15 +1180,15 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
                                        lch_queue;
        }
 
-       l = dma_read(CLNK_CTRL, lch_head);
+       l = p->dma_read(CLNK_CTRL, lch_head);
        l &= ~(0x1f);
        l |= lch_queue;
-       dma_write(l, CLNK_CTRL, lch_head);
+       p->dma_write(l, CLNK_CTRL, lch_head);
 
-       l = dma_read(CLNK_CTRL, lch_queue);
+       l = p->dma_read(CLNK_CTRL, lch_queue);
        l &= ~(0x1f);
        l |= (dma_chan[lch_queue].next_linked_ch);
-       dma_write(l, CLNK_CTRL, lch_queue);
+       p->dma_write(l, CLNK_CTRL, lch_queue);
 }
 
 /**
@@ -1651,13 +1464,13 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 
        /* Set the params to the free channel */
        if (src_start != 0)
-               dma_write(src_start, CSSA, lch);
+               p->dma_write(src_start, CSSA, lch);
        if (dest_start != 0)
-               dma_write(dest_start, CDSA, lch);
+               p->dma_write(dest_start, CDSA, lch);
 
        /* Write the buffer size */
-       dma_write(elem_count, CEN, lch);
-       dma_write(frame_count, CFN, lch);
+       p->dma_write(elem_count, CEN, lch);
+       p->dma_write(frame_count, CFN, lch);
 
        /*
         * If the chain is dynamically linked,
@@ -1690,7 +1503,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                                enable_lnk(dma_chan[lch].prev_linked_ch);
                                dma_chan[lch].state = DMA_CH_QUEUED;
                                start_dma = 0;
-                               if (0 == ((1 << 7) & dma_read(
+                               if (0 == ((1 << 7) & p->dma_read(
                                        CCR, dma_chan[lch].prev_linked_ch))) {
                                        disable_lnk(dma_chan[lch].
                                                    prev_linked_ch);
@@ -1707,7 +1520,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                        }
                        omap_enable_channel_irq(lch);
 
-                       l = dma_read(CCR, lch);
+                       l = p->dma_read(CCR, lch);
 
                        if ((0 == (l & (1 << 24))))
                                l &= ~(1 << 25);
@@ -1718,12 +1531,12 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                                        l |= (1 << 7);
                                        dma_chan[lch].state = DMA_CH_STARTED;
                                        pr_debug("starting %d\n", lch);
-                                       dma_write(l, CCR, lch);
+                                       p->dma_write(l, CCR, lch);
                                } else
                                        start_dma = 0;
                        } else {
                                if (0 == (l & (1 << 7)))
-                                       dma_write(l, CCR, lch);
+                                       p->dma_write(l, CCR, lch);
                        }
                        dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
                }
@@ -1768,7 +1581,7 @@ int omap_start_dma_chain_transfers(int chain_id)
                omap_enable_channel_irq(channels[0]);
        }
 
-       l = dma_read(CCR, channels[0]);
+       l = p->dma_read(CCR, channels[0]);
        l |= (1 << 7);
        dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
        dma_chan[channels[0]].state = DMA_CH_STARTED;
@@ -1777,7 +1590,7 @@ int omap_start_dma_chain_transfers(int chain_id)
                l &= ~(1 << 25);
        else
                l |= (1 << 25);
-       dma_write(l, CCR, channels[0]);
+       p->dma_write(l, CCR, channels[0]);
 
        dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
 
@@ -1813,19 +1626,19 @@ int omap_stop_dma_chain_transfers(int chain_id)
        channels = dma_linked_lch[chain_id].linked_dmach_q;
 
        if (IS_DMA_ERRATA(DMA_ERRATA_i88)) {
-               sys_cf = dma_read(OCP_SYSCONFIG, 0);
+               sys_cf = p->dma_read(OCP_SYSCONFIG, 0);
                l = sys_cf;
                /* Middle mode reg set no Standby */
                l &= ~((1 << 12)|(1 << 13));
-               dma_write(l, OCP_SYSCONFIG, 0);
+               p->dma_write(l, OCP_SYSCONFIG, 0);
        }
 
        for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
 
                /* Stop the Channel transmission */
-               l = dma_read(CCR, channels[i]);
+               l = p->dma_read(CCR, channels[i]);
                l &= ~(1 << 7);
-               dma_write(l, CCR, channels[i]);
+               p->dma_write(l, CCR, channels[i]);
 
                /* Disable the link in all the channels */
                disable_lnk(channels[i]);
@@ -1838,7 +1651,7 @@ int omap_stop_dma_chain_transfers(int chain_id)
        OMAP_DMA_CHAIN_QINIT(chain_id);
 
        if (IS_DMA_ERRATA(DMA_ERRATA_i88))
-               dma_write(sys_cf, OCP_SYSCONFIG, 0);
+               p->dma_write(sys_cf, OCP_SYSCONFIG, 0);
 
        return 0;
 }
@@ -1880,8 +1693,8 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
        /* Get the current channel */
        lch = channels[dma_linked_lch[chain_id].q_head];
 
-       *ei = dma_read(CCEN, lch);
-       *fi = dma_read(CCFN, lch);
+       *ei = p->dma_read(CCEN, lch);
+       *fi = p->dma_read(CCFN, lch);
 
        return 0;
 }
@@ -1918,7 +1731,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
        /* Get the current channel */
        lch = channels[dma_linked_lch[chain_id].q_head];
 
-       return dma_read(CDAC, lch);
+       return p->dma_read(CDAC, lch);
 }
 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
 
@@ -1952,7 +1765,7 @@ int omap_get_dma_chain_src_pos(int chain_id)
        /* Get the current channel */
        lch = channels[dma_linked_lch[chain_id].q_head];
 
-       return dma_read(CSAC, lch);
+       return p->dma_read(CSAC, lch);
 }
 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
 #endif /* ifndef CONFIG_ARCH_OMAP1 */
@@ -1969,7 +1782,7 @@ static int omap1_dma_handle_ch(int ch)
                csr = dma_chan[ch].saved_csr;
                dma_chan[ch].saved_csr = 0;
        } else
-               csr = dma_read(CSR, ch);
+               csr = p->dma_read(CSR, ch);
        if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
                dma_chan[ch + 6].saved_csr = csr >> 7;
                csr &= 0x7f;
@@ -2022,13 +1835,13 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 
 static int omap2_dma_handle_ch(int ch)
 {
-       u32 status = dma_read(CSR, ch);
+       u32 status = p->dma_read(CSR, ch);
 
        if (!status) {
                if (printk_ratelimit())
                        printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
                                ch);
-               dma_write(1 << ch, IRQSTATUS_L0, ch);
+               p->dma_write(1 << ch, IRQSTATUS_L0, ch);
                return 0;
        }
        if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -2047,9 +1860,9 @@ static int omap2_dma_handle_ch(int ch)
                if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
                        u32 ccr;
 
-                       ccr = dma_read(CCR, ch);
+                       ccr = p->dma_read(CCR, ch);
                        ccr &= ~OMAP_DMA_CCR_EN;
-                       dma_write(ccr, CCR, ch);
+                       p->dma_write(ccr, CCR, ch);
                        dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
                }
        }
@@ -2060,16 +1873,16 @@ static int omap2_dma_handle_ch(int ch)
                printk(KERN_INFO "DMA misaligned error with device %d\n",
                       dma_chan[ch].dev_id);
 
-       dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
-       dma_write(1 << ch, IRQSTATUS_L0, ch);
+       p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+       p->dma_write(1 << ch, IRQSTATUS_L0, ch);
        /* read back the register to flush the write */
-       dma_read(IRQSTATUS_L0, ch);
+       p->dma_read(IRQSTATUS_L0, ch);
 
        /* If the ch is not chained then chain_id will be -1 */
        if (dma_chan[ch].chain_id != -1) {
                int chain_id = dma_chan[ch].chain_id;
                dma_chan[ch].state = DMA_CH_NOTSTARTED;
-               if (dma_read(CLNK_CTRL, ch) & (1 << 15))
+               if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
                        dma_chan[dma_chan[ch].next_linked_ch].state =
                                                        DMA_CH_STARTED;
                if (dma_linked_lch[chain_id].chain_mode ==
@@ -2079,10 +1892,10 @@ static int omap2_dma_handle_ch(int ch)
                if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
                        OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
-               status = dma_read(CSR, ch);
+               status = p->dma_read(CSR, ch);
        }
 
-       dma_write(status, CSR, ch);
+       p->dma_write(status, CSR, ch);
 
        if (likely(dma_chan[ch].callback != NULL))
                dma_chan[ch].callback(ch, status, dma_chan[ch].data);
@@ -2096,13 +1909,13 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
        u32 val, enable_reg;
        int i;
 
-       val = dma_read(IRQSTATUS_L0, 0);
+       val = p->dma_read(IRQSTATUS_L0, 0);
        if (val == 0) {
                if (printk_ratelimit())
                        printk(KERN_WARNING "Spurious DMA IRQ\n");
                return IRQ_HANDLED;
        }
-       enable_reg = dma_read(IRQENABLE_L0, 0);
+       enable_reg = p->dma_read(IRQENABLE_L0, 0);
        val &= enable_reg; /* Dispatch only relevant interrupts */
        for (i = 0; i < dma_lch_count && val != 0; i++) {
                if (val & 1)
@@ -2128,206 +1941,66 @@ static struct irqaction omap24xx_dma_irq;
 void omap_dma_global_context_save(void)
 {
        omap_dma_global_context.dma_irqenable_l0 =
-               dma_read(IRQENABLE_L0, 0);
+               p->dma_read(IRQENABLE_L0, 0);
        omap_dma_global_context.dma_ocp_sysconfig =
-               dma_read(OCP_SYSCONFIG, 0);
-       omap_dma_global_context.dma_gcr = dma_read(GCR, 0);
+               p->dma_read(OCP_SYSCONFIG, 0);
+       omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
 }
 
 void omap_dma_global_context_restore(void)
 {
        int ch;
 
-       dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
-       dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+       p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
+       p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
                OCP_SYSCONFIG, 0);
-       dma_write(omap_dma_global_context.dma_irqenable_l0,
+       p->dma_write(omap_dma_global_context.dma_irqenable_l0,
                IRQENABLE_L0, 0);
 
        if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
-               dma_write(0x3 , IRQSTATUS_L0, 0);
+               p->dma_write(0x3 , IRQSTATUS_L0, 0);
 
        for (ch = 0; ch < dma_chan_count; ch++)
                if (dma_chan[ch].dev_id != -1)
                        omap_clear_dma(ch);
 }
 
-static void configure_dma_errata(void)
+static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 {
-
-       /*
-        * Errata applicable for OMAP2430ES1.0 and all omap2420
-        *
-        * I.
-        * Erratum ID: Not Available
-        * Inter Frame DMA buffering issue DMA will wrongly
-        * buffer elements if packing and bursting is enabled. This might
-        * result in data gets stalled in FIFO at the end of the block.
-        * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
-        * guarantee no data will stay in the DMA FIFO in case inter frame
-        * buffering occurs
-        *
-        * II.
-        * Erratum ID: Not Available
-        * DMA may hang when several channels are used in parallel
-        * In the following configuration, DMA channel hanging can occur:
-        * a. Channel i, hardware synchronized, is enabled
-        * b. Another channel (Channel x), software synchronized, is enabled.
-        * c. Channel i is disabled before end of transfer
-        * d. Channel i is reenabled.
-        * e. Steps 1 to 4 are repeated a certain number of times.
-        * f. A third channel (Channel y), software synchronized, is enabled.
-        * Channel x and Channel y may hang immediately after step 'f'.
-        * Workaround:
-        * For any channel used - make sure NextLCH_ID is set to the value j.
-        */
-       if (cpu_is_omap2420() || (cpu_is_omap2430() &&
-                               (omap_type() == OMAP2430_REV_ES1_0))) {
-               SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
-               SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
-       }
-
-       /*
-        * Erratum ID: i378: OMAP2plus: sDMA Channel is not disabled
-        * after a transaction error.
-        * Workaround: SW should explicitely disable the channel.
-        */
-       if (cpu_class_is_omap2())
-               SET_DMA_ERRATA(DMA_ERRATA_i378);
-
-       /*
-        * Erratum ID: i541: sDMA FIFO draining does not finish
-        * If sDMA channel is disabled on the fly, sDMA enters standby even
-        * through FIFO Drain is still in progress
-        * Workaround: Put sDMA in NoStandby more before a logical channel is
-        * disabled, then put it back to SmartStandby right after the channel
-        * finishes FIFO draining.
-        */
-       if (cpu_is_omap34xx())
-               SET_DMA_ERRATA(DMA_ERRATA_i541);
-
-       /*
-        * Erratum ID: i88 : Special programming model needed to disable DMA
-        * before end of block.
-        * Workaround: software must ensure that the DMA is configured in No
-        * Standby mode(DMAx_OCP_SYSCONFIG.MIDLEMODE = "01")
-        */
-       if (cpu_is_omap34xx() && (omap_type() == OMAP3430_REV_ES1_0))
-               SET_DMA_ERRATA(DMA_ERRATA_i88);
-
-       /*
-        * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
-        * read before the DMA controller finished disabling the channel.
-        */
-       if (!cpu_is_omap15xx())
-               SET_DMA_ERRATA(DMA_ERRATA_3_3);
-
-       /*
-        * Erratum ID: Not Available
-        * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
-        * after secure sram context save and restore.
-        * Work around: Hence we need to manually clear those IRQs to avoid
-        * spurious interrupts. This affects only secure devices.
-        */
-       if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
-               SET_DMA_ERRATA(DMA_ROMCODE_BUG);
-}
-
-/*----------------------------------------------------------------------------*/
-
-static int __init omap_init_dma(void)
-{
-       unsigned long base;
-       int ch, r;
-
-       if (cpu_class_is_omap1()) {
-               base = OMAP1_DMA_BASE;
-               dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
-       } else if (cpu_is_omap24xx()) {
-               base = OMAP24XX_DMA4_BASE;
-               dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
-       } else if (cpu_is_omap34xx()) {
-               base = OMAP34XX_DMA4_BASE;
-               dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
-       } else if (cpu_is_omap44xx()) {
-               base = OMAP44XX_DMA4_BASE;
-               dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
-       } else {
-               pr_err("DMA init failed for unsupported omap\n");
-               return -ENODEV;
+       int ch, ret = 0;
+       int dma_irq;
+       char irq_name[4];
+       int irq_rel;
+
+       p = pdev->dev.platform_data;
+       if (!p) {
+               dev_err(&pdev->dev, "%s: System DMA initialized without"
+                       "platform data\n", __func__);
+               return -EINVAL;
        }
 
-       omap_dma_base = ioremap(base, SZ_4K);
-       BUG_ON(!omap_dma_base);
-
-       if (cpu_class_is_omap1()) {
-               dma_stride              = 0x40;
-               reg_map                 = reg_map_omap1;
-               dma_common_ch_start     = CPC;
-               dma_common_ch_end       = COLOR;
-       } else {
-               dma_stride              = 0x60;
-               reg_map                 = reg_map_omap2;
-               dma_common_ch_start     = CSDP;
-               if (cpu_is_omap3630() || cpu_is_omap4430())
-                       dma_common_ch_end = CCDN;
-               else
-                       dma_common_ch_end = CCFN;
-       }
+       d                       = p->dma_attr;
+       errata                  = p->errata;
 
-       if (cpu_class_is_omap2() && omap_dma_reserve_channels
+       if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
                        && (omap_dma_reserve_channels <= dma_lch_count))
-               dma_lch_count = omap_dma_reserve_channels;
+               d->lch_count    = omap_dma_reserve_channels;
 
-       dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
-                               GFP_KERNEL);
-       if (!dma_chan) {
-               r = -ENOMEM;
-               goto out_unmap;
-       }
+       dma_lch_count           = d->lch_count;
+       dma_chan_count          = dma_lch_count;
+       dma_chan                = d->chan;
+       enable_1510_mode        = d->dev_caps & ENABLE_1510_MODE;
 
        if (cpu_class_is_omap2()) {
                dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
                                                dma_lch_count, GFP_KERNEL);
                if (!dma_linked_lch) {
-                       r = -ENOMEM;
-                       goto out_free;
+                       ret = -ENOMEM;
+                       goto exit_dma_lch_fail;
                }
        }
 
-       if (cpu_is_omap15xx()) {
-               printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
-               dma_chan_count = 9;
-               enable_1510_mode = 1;
-       } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
-               printk(KERN_INFO "OMAP DMA hardware version %d\n",
-                      dma_read(HW_ID, 0));
-               printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-                      dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
-                      dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
-                      dma_read(CAPS_4, 0));
-               if (!enable_1510_mode) {
-                       u16 w;
-
-                       /* Disable OMAP 3.0/3.1 compatibility mode. */
-                       w = dma_read(GSCR, 0);
-                       w |= 1 << 3;
-                       dma_write(w, GSCR, 0);
-                       dma_chan_count = 16;
-               } else
-                       dma_chan_count = 9;
-       } else if (cpu_class_is_omap2()) {
-               u8 revision = dma_read(REVISION, 0) & 0xff;
-               printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
-                      revision >> 4, revision & 0xf);
-               dma_chan_count = dma_lch_count;
-       } else {
-               dma_chan_count = 0;
-               return 0;
-       }
-
        spin_lock_init(&dma_chan_lock);
-
        for (ch = 0; ch < dma_chan_count; ch++) {
                omap_clear_dma(ch);
                if (cpu_class_is_omap2())
@@ -2344,20 +2017,23 @@ static int __init omap_init_dma(void)
                         * request_irq() doesn't like dev_id (ie. ch) being
                         * zero, so we have to kludge around this.
                         */
-                       r = request_irq(omap1_dma_irq[ch],
+                       sprintf(&irq_name[0], "%d", ch);
+                       dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+                       if (dma_irq < 0) {
+                               ret = dma_irq;
+                               goto exit_dma_irq_fail;
+                       }
+
+                       /* INT_DMA_LCD is handled in lcd_dma.c */
+                       if (dma_irq == INT_DMA_LCD)
+                               continue;
+
+                       ret = request_irq(dma_irq,
                                        omap1_dma_irq_handler, 0, "DMA",
                                        (void *) (ch + 1));
-                       if (r != 0) {
-                               int i;
-
-                               printk(KERN_ERR "unable to request IRQ %d "
-                                      "for DMA (error %d)\n",
-                                      omap1_dma_irq[ch], r);
-                               for (i = 0; i < ch; i++)
-                                       free_irq(omap1_dma_irq[i],
-                                                (void *) (i + 1));
-                               goto out_free;
-                       }
+                       if (ret != 0)
+                               goto exit_dma_irq_fail;
                }
        }
 
@@ -2366,47 +2042,91 @@ static int __init omap_init_dma(void)
                                DMA_DEFAULT_FIFO_DEPTH, 0);
 
        if (cpu_class_is_omap2()) {
-               int irq;
-               if (cpu_is_omap44xx())
-                       irq = OMAP44XX_IRQ_SDMA_0;
-               else
-                       irq = INT_24XX_SDMA_IRQ0;
-               setup_irq(irq, &omap24xx_dma_irq);
-       }
-
-       if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-               /* Enable smartidle idlemodes and autoidle */
-               u32 v = dma_read(OCP_SYSCONFIG, 0);
-               v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
-                               DMA_SYSCONFIG_SIDLEMODE_MASK |
-                               DMA_SYSCONFIG_AUTOIDLE);
-               v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
-                       DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
-                       DMA_SYSCONFIG_AUTOIDLE);
-               dma_write(v , OCP_SYSCONFIG, 0);
-               /* reserve dma channels 0 and 1 in high security devices */
-               if (cpu_is_omap34xx() &&
-                       (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
-                       printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
-                                       "HS ROM code\n");
-                       dma_chan[0].dev_id = 0;
-                       dma_chan[1].dev_id = 1;
+               strcpy(irq_name, "0");
+               dma_irq = platform_get_irq_byname(pdev, irq_name);
+               if (dma_irq < 0) {
+                       dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+                       goto exit_dma_lch_fail;
+               }
+               ret = setup_irq(dma_irq, &omap24xx_dma_irq);
+               if (ret) {
+                       dev_err(&pdev->dev, "set_up failed for IRQ %d"
+                               "for DMA (error %d)\n", dma_irq, ret);
+                       goto exit_dma_lch_fail;
                }
        }
-       configure_dma_errata();
 
+       /* reserve dma channels 0 and 1 in high security devices */
+       if (cpu_is_omap34xx() &&
+               (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+               printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+                               "HS ROM code\n");
+               dma_chan[0].dev_id = 0;
+               dma_chan[1].dev_id = 1;
+       }
+       p->show_dma_caps();
        return 0;
 
-out_free:
+exit_dma_irq_fail:
+       dev_err(&pdev->dev, "unable to request IRQ %d"
+                       "for DMA (error %d)\n", dma_irq, ret);
+       for (irq_rel = 0; irq_rel < ch; irq_rel++) {
+               dma_irq = platform_get_irq(pdev, irq_rel);
+               free_irq(dma_irq, (void *)(irq_rel + 1));
+       }
+
+exit_dma_lch_fail:
+       kfree(p);
+       kfree(d);
        kfree(dma_chan);
+       return ret;
+}
 
-out_unmap:
-       iounmap(omap_dma_base);
+static int __devexit omap_system_dma_remove(struct platform_device *pdev)
+{
+       int dma_irq;
 
-       return r;
+       if (cpu_class_is_omap2()) {
+               char irq_name[4];
+               strcpy(irq_name, "0");
+               dma_irq = platform_get_irq_byname(pdev, irq_name);
+               remove_irq(dma_irq, &omap24xx_dma_irq);
+       } else {
+               int irq_rel = 0;
+               for ( ; irq_rel < dma_chan_count; irq_rel++) {
+                       dma_irq = platform_get_irq(pdev, irq_rel);
+                       free_irq(dma_irq, (void *)(irq_rel + 1));
+               }
+       }
+       kfree(p);
+       kfree(d);
+       kfree(dma_chan);
+       return 0;
+}
+
+static struct platform_driver omap_system_dma_driver = {
+       .probe          = omap_system_dma_probe,
+       .remove         = omap_system_dma_remove,
+       .driver         = {
+               .name   = "omap_dma_system"
+       },
+};
+
+static int __init omap_system_dma_init(void)
+{
+       return platform_driver_register(&omap_system_dma_driver);
+}
+arch_initcall(omap_system_dma_init);
+
+static void __exit omap_system_dma_exit(void)
+{
+       platform_driver_unregister(&omap_system_dma_driver);
 }
 
-arch_initcall(omap_init_dma);
+MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
 
 /*
  * Reserve the omap SDMA channels using cmdline bootarg
index 4b51d2b..d1c916f 100644 (file)
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
-
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE                 (0xfffed800)
+#include <linux/platform_device.h>
 
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE             (L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE             (L4_34XX_BASE + 0x56000)
-#define OMAP44XX_DMA4_BASE             (L4_44XX_BASE + 0x56000)
+/*
+ * TODO: These dma channel defines should go away once all
+ * the omap drivers hwmod adapted.
+ */
 
-#define OMAP1_LOGICAL_DMA_CH_COUNT     17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32      /* REVISIT: Is this 32 + 2? */
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
 
 /* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE             0
 #define IS_CSSA_32                     BIT(0x3)
 #define IS_CDSA_32                     BIT(0x4)
 #define IS_RW_PRIORITY                 BIT(0x5)
+#define ENABLE_1510_MODE               BIT(0x6)
+#define SRC_PORT                       BIT(0x7)
+#define DST_PORT                       BIT(0x8)
+#define SRC_INDEX                      BIT(0x9)
+#define DST_INDEX                      BIT(0xA)
+#define IS_BURST_ONLY4                 BIT(0xB)
+#define CLEAR_CSR_ON_READ              BIT(0xC)
+#define IS_WORD_16                     BIT(0xD)
 
 enum omap_reg_offsets {
 
@@ -397,9 +401,40 @@ struct omap_dma_channel_params {
 #endif
 };
 
+struct omap_dma_lch {
+       int next_lch;
+       int dev_id;
+       u16 saved_csr;
+       u16 enabled_irqs;
+       const char *dev_name;
+       void (*callback)(int lch, u16 ch_status, void *data);
+       void *data;
+       long flags;
+       /* required for Dynamic chaining */
+       int prev_linked_ch;
+       int next_linked_ch;
+       int state;
+       int chain_id;
+       int status;
+};
+
 struct omap_dma_dev_attr {
        u32 dev_caps;
        u16 lch_count;
+       u16 chan_count;
+       struct omap_dma_lch *chan;
+};
+
+/* System DMA platform data structure */
+struct omap_system_dma_plat_info {
+       struct omap_dma_dev_attr *dma_attr;
+       u32 errata;
+       void (*disable_irq_lch)(int lch);
+       void (*show_dma_caps)(void);
+       void (*clear_lch_regs)(int lch);
+       void (*clear_dma)(int lch);
+       void (*dma_write)(u32 val, int reg, int lch);
+       u32 (*dma_read)(int reg, int lch);
 };
 
 extern void omap_set_dma_priority(int lch, int dst_port, int priority);