ALC880_5ST_DIG,
ALC880_W810,
ALC880_Z71V,
- ALC880_TEST,
+ ALC880_AUTO,
ALC880_6ST_DIG,
ALC880_F1734,
ALC880_ASUS,
ALC880_ASUS_DIG,
ALC880_ASUS_W1V,
ALC880_UNIWILL_DIG,
+#ifdef CONFIG_SND_DEBUG
+ ALC880_TEST,
+#endif
ALC880_MODEL_LAST /* last tag */
};
ALC260_MODEL_LAST /* last tag */
};
+/* amp values */
+#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
+#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
+#define AMP_OUT_MUTE 0xb080
+#define AMP_OUT_UNMUTE 0xb000
+#define AMP_OUT_ZERO 0xb000
+/* pinctl values */
+#define PIN_IN 0x20
+#define PIN_VREF80 0x24
+#define PIN_VREF50 0x21
+#define PIN_OUT 0x40
+#define PIN_HP 0xc0
+
struct alc_spec {
/* codec parameterization */
- unsigned int front_panel: 1; /* indicates the board has a front panel;
- * not referred currently for any purpose,
- * though...
- */
-
- snd_kcontrol_new_t *mixers[2]; /* mixer arrays */
+ snd_kcontrol_new_t *mixers[3]; /* mixer arrays */
unsigned int num_mixers;
- struct hda_verb *init_verbs; /* initialization verbs
- * don't forget NULL termination!
- */
+ const struct hda_verb *init_verbs[3]; /* initialization verbs
+ * don't forget NULL termination!
+ */
+ unsigned int num_init_verbs;
char *stream_name_analog; /* analog PCM stream */
struct hda_pcm_stream *stream_analog_playback;
struct hda_pcm pcm_rec[2]; /* used in alc_build_pcms() */
struct semaphore bind_mutex; /* for bound controls */
-};
-
-/* DAC/ADC assignment */
-
-static hda_nid_t alc880_dac_nids[4] = {
- /* front, rear, clfe, rear_surr */
- 0x02, 0x05, 0x04, 0x03
-};
-
-static hda_nid_t alc880_6st_dac_nids[4] = {
- /* front, rear, clfe, rear_surr */
- 0x02, 0x03, 0x04, 0x05
-};
-
-static hda_nid_t alc880_w810_dac_nids[3] = {
- /* front, rear/surround, clfe */
- 0x02, 0x03, 0x04
-};
-
-static hda_nid_t alc880_z71v_dac_nids[1] = {
- /* front only? */
- 0x02
-};
-
-#if 0
-/* The datasheet says the node 0x07 is connected from inputs,
- * but it shows zero connection in the real implementation on some devices.
- */
-static hda_nid_t alc880_adc_nids[3] = {
- /* ADC0-2 */
- 0x07, 0x08, 0x09,
-};
-#else
-static hda_nid_t alc880_adc_nids[2] = {
- /* ADC1-2 */
- 0x08, 0x09,
-};
-#endif
-
-#define ALC880_DIGOUT_NID 0x06
-#define ALC880_DIGIN_NID 0x0a
-
-static hda_nid_t alc260_dac_nids[1] = {
- /* front */
- 0x02,
-};
-
-static hda_nid_t alc260_adc_nids[1] = {
- /* ADC0 */
- 0x04,
-};
-static hda_nid_t alc260_hp_adc_nids[1] = {
- /* ADC1 */
- 0x05,
-};
-
-#define ALC260_DIGOUT_NID 0x03
-#define ALC260_DIGIN_NID 0x06
-
-static struct hda_input_mux alc880_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x3 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
+ /* dynamic controls, init_verbs and input_mux */
+ struct auto_pin_cfg autocfg;
+ unsigned int num_kctl_alloc, num_kctl_used;
+ snd_kcontrol_new_t *kctl_alloc;
+ struct hda_input_mux private_imux;
};
-//pshou 05/24/05
-static struct hda_input_mux alc880_6stack_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc260_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
/*
* input MUX handling
spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]);
}
+
/*
* channel mode setting
*/
const struct hda_verb *sequence;
};
-
-/*
- * channel source setting (2/6 channel selection for 3-stack)
- */
-
-/*
- * set the path ways for 2 channel output
- * need to set the codec line out and mic 1 pin widgets to inputs
- */
-static struct hda_verb alc880_threestack_ch2_init[] = {
- /* set pin widget 1Ah (line in) for input */
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* set pin widget 18h (mic1) for input, for mic also enable the vref */
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* mute the output for Line In PW */
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
- /* mute for Mic1 PW */
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
- { } /* end */
-};
-
-/*
- * 6ch mode
- * need to set the codec line out and mic 1 pin widgets to outputs
- */
-static struct hda_verb alc880_threestack_ch6_init[] = {
- /* set pin widget 1Ah (line in) for output */
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* set pin widget 18h (mic1) for output */
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* unmute the output for Line In PW */
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
- /* unmute for Mic1 PW */
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
- /* for rear channel output using Line In 1
- * set select widget connection (nid = 0x12) - to summer node
- * for rear NID = 0x0f...offset 3 in connection list
- */
- { 0x12, AC_VERB_SET_CONNECT_SEL, 0x3 },
- /* for Mic1 - retask for center/lfe */
- /* set select widget connection (nid = 0x10) - to summer node for
- * front CLFE NID = 0x0e...offset 2 in connection list
- */
- { 0x10, AC_VERB_SET_CONNECT_SEL, 0x2 },
- { } /* end */
-};
-
-static struct alc_channel_mode alc880_threestack_modes[2] = {
- { 2, alc880_threestack_ch2_init },
- { 6, alc880_threestack_ch6_init },
-};
-
-
-/*
- * channel source setting (6/8 channel selection for 5-stack)
- */
-
-/* set the path ways for 6 channel output
- * need to set the codec line out and mic 1 pin widgets to inputs
- */
-static struct hda_verb alc880_fivestack_ch6_init[] = {
- /* set pin widget 1Ah (line in) for input */
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* mute the output for Line In PW */
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
- { } /* end */
-};
-
-/* need to set the codec line out and mic 1 pin widgets to outputs */
-static struct hda_verb alc880_fivestack_ch8_init[] = {
- /* set pin widget 1Ah (line in) for output */
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* unmute the output for Line In PW */
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
- /* output for surround channel output using Line In 1 */
- /* set select widget connection (nid = 0x12) - to summer node
- * for surr_rear NID = 0x0d...offset 1 in connection list
- */
- { 0x12, AC_VERB_SET_CONNECT_SEL, 0x1 },
- { } /* end */
-};
-
-static struct alc_channel_mode alc880_fivestack_modes[2] = {
- { 6, alc880_fivestack_ch6_init },
- { 8, alc880_fivestack_ch8_init },
-};
-
-/*
- * channel source setting for W810 system
- *
- * W810 has rear IO for:
- * Front (DAC 02)
- * Surround (DAC 03)
- * Center/LFE (DAC 04)
- * Digital out (06)
- *
- * The system also has a pair of internal speakers, and a headphone jack.
- * These are both connected to Line2 on the codec, hence to DAC 02.
- *
- * There is a variable resistor to control the speaker or headphone
- * volume. This is a hardware-only device without a software API.
- *
- * Plugging headphones in will disable the internal speakers. This is
- * implemented in hardware, not via the driver using jack sense. In
- * a similar fashion, plugging into the rear socket marked "front" will
- * disable both the speakers and headphones.
- *
- * For input, there's a microphone jack, and an "audio in" jack.
- * These may not do anything useful with this driver yet, because I
- * haven't setup any initialization verbs for these yet...
- */
-
-static struct alc_channel_mode alc880_w810_modes[1] = {
- { 6, NULL }
-};
-
-static struct alc_channel_mode alc880_z71v_modes[1] = {
- { 2, NULL }
-};
-
-//pshou 05/19/05
-static struct alc_channel_mode alc880_sixstack_modes[1] = {
- { 8, NULL },
-};
-
-/*
- */
static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
#define ALC_BIND_MUTE(xname,nid,indices,dir) ALC_BIND_MUTE_MONO(xname,nid,3,indices,dir)
+
/*
+ * ALC880 3-stack model
+ *
+ * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e)
+ * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18, F-Mic = 0x1b
+ * HP = 0x19
*/
-/* 3-stack mode
- * Pin assignment: Front=0x14, Line-In/Rear=0x1a, Mic/CLFE=0x18, F-Mic=0x1b
- * HP=0x19
+static hda_nid_t alc880_dac_nids[4] = {
+ /* front, rear, clfe, rear_surr */
+ 0x02, 0x05, 0x04, 0x03
+};
+
+static hda_nid_t alc880_adc_nids[3] = {
+ /* ADC0-2 */
+ 0x07, 0x08, 0x09,
+};
+
+/* The datasheet says the node 0x07 is connected from inputs,
+ * but it shows zero connection in the real implementation on some devices.
*/
-static snd_kcontrol_new_t alc880_base_mixer[] = {
+static hda_nid_t alc880_adc_nids_alt[2] = {
+ /* ADC1-2 */
+ 0x08, 0x09,
+};
+
+#define ALC880_DIGOUT_NID 0x06
+#define ALC880_DIGIN_NID 0x0a
+
+static struct hda_input_mux alc880_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x3 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+/* channel source setting (2/6 channel selection for 3-stack) */
+/* 2ch mode */
+static struct hda_verb alc880_threestack_ch2_init[] = {
+ /* set line-in to input, mute it */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ /* set mic-in to input vref 80%, mute it */
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/* 6ch mode */
+static struct hda_verb alc880_threestack_ch6_init[] = {
+ /* set line-in to output, unmute it */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ /* set mic-in to output, unmute it */
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { } /* end */
+};
+
+static struct alc_channel_mode alc880_threestack_modes[2] = {
+ { 2, alc880_threestack_ch2_init },
+ { 6, alc880_threestack_ch6_init },
+};
+
+static snd_kcontrol_new_t alc880_three_stack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Surround Playback Switch", 0x1a, 2, HDA_INPUT),
+ ALC_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
- /* We don't use NID 0x07 - see above */
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc880_ch_mode_info,
+ .get = alc880_ch_mode_get,
+ .put = alc880_ch_mode_put,
+ },
+ { } /* end */
+};
+
+/* capture mixer elements */
+static snd_kcontrol_new_t alc880_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
*/
/* .name = "Capture Source", */
.name = "Input Source",
- .count = 2,
+ .count = 3,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
- },
{ } /* end */
};
-/* 5-stack mode
- * Pin assignment: Front=0x14, Rear=0x17, CLFE=0x16
- * Line-In/Side=0x1a, Mic=0x18, F-Mic=0x1b, HP=0x19
- */
-static snd_kcontrol_new_t alc880_five_stack_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
- ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- /* HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), */
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
- /* We don't use NID 0x07 - see above */
+/* capture mixer elements (in case NID 0x07 not available) */
+static snd_kcontrol_new_t alc880_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
- },
{ } /* end */
};
-static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 3,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+
+
+/*
+ * ALC880 5-stack model
+ *
+ * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d), Side = 0x02 (0xd)
+ * Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16
+ * Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19
+ */
+
+/* additional mixers to alc880_three_stack_mixer */
+static snd_kcontrol_new_t alc880_five_stack_mixer[] = {
+ HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ ALC_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT),
{ } /* end */
};
-static snd_kcontrol_new_t alc880_z71v_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 3,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+/* channel source setting (6/8 channel selection for 5-stack) */
+/* 6ch mode */
+static struct hda_verb alc880_fivestack_ch6_init[] = {
+ /* set line-in to input, mute it */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
{ } /* end */
};
-//pshou 05/24/05
+/* 8ch mode */
+static struct hda_verb alc880_fivestack_ch8_init[] = {
+ /* set line-in to output, unmute it */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { } /* end */
+};
+
+static struct alc_channel_mode alc880_fivestack_modes[2] = {
+ { 6, alc880_fivestack_ch6_init },
+ { 8, alc880_fivestack_ch8_init },
+};
+
+
+/*
+ * ALC880 6-stack model
+ *
+ * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e), Side = 0x05 (0x0f)
+ * Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17,
+ * Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b
+ */
+
+static hda_nid_t alc880_6st_dac_nids[4] = {
+ /* front, rear, clfe, rear_surr */
+ 0x02, 0x03, 0x04, 0x05
+};
+
+static struct hda_input_mux alc880_6stack_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+/* fixed 8-channels */
+static struct alc_channel_mode alc880_sixstack_modes[1] = {
+ { 8, NULL },
+};
+
static snd_kcontrol_new_t alc880_six_stack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- /* HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), */
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
{ } /* end */
};
-// 03/08/05 Fujitsu
-static snd_kcontrol_new_t alc880_2_jack_mixer[] = {
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- { } /* end */
+
+/*
+ * ALC880 W810 model
+ *
+ * W810 has rear IO for:
+ * Front (DAC 02)
+ * Surround (DAC 03)
+ * Center/LFE (DAC 04)
+ * Digital out (06)
+ *
+ * The system also has a pair of internal speakers, and a headphone jack.
+ * These are both connected to Line2 on the codec, hence to DAC 02.
+ *
+ * There is a variable resistor to control the speaker or headphone
+ * volume. This is a hardware-only device without a software API.
+ *
+ * Plugging headphones in will disable the internal speakers. This is
+ * implemented in hardware, not via the driver using jack sense. In
+ * a similar fashion, plugging into the rear socket marked "front" will
+ * disable both the speakers and headphones.
+ *
+ * For input, there's a microphone jack, and an "audio in" jack.
+ * These may not do anything useful with this driver yet, because I
+ * haven't setup any initialization verbs for these yet...
+ */
+
+static hda_nid_t alc880_w810_dac_nids[3] = {
+ /* front, rear/surround, clfe */
+ 0x02, 0x03, 0x04
};
-//pshou 04/24/05
-static snd_kcontrol_new_t alc880_asus_mixer[] = {
+/* fixed 6 channels */
+static struct alc_channel_mode alc880_w810_modes[1] = {
+ { 6, NULL }
+};
+
+/* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, HP = 0x1b */
+static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
ALC_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
+
+/*
+ * Z710V model
+ *
+ * DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d)
+ * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?), Line = 0x1a
+ */
+
+static hda_nid_t alc880_z71v_dac_nids[1] = {
+ 0x02
+};
+#define ALC880_Z71V_HP_DAC 0x03
+
+/* fixed 2 channels */
+static struct alc_channel_mode alc880_2_jack_modes[1] = {
+ { 2, NULL }
+};
+
+static snd_kcontrol_new_t alc880_z71v_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ ALC_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc880_ch_mode_info,
- .get = alc880_ch_mode_get,
- .put = alc880_ch_mode_put,
- },
{ } /* end */
};
-// pshou 05/03/05
-static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = {
+
+/* FIXME! */
+/*
+ * ALC880 F1734 model
+ *
+ * DAC: HP = 0x02 (0x0c), Front = 0x03 (0x0d)
+ * Pin assignment: HP = 0x14, Front = 0x15, Mic = 0x18
+ */
+
+static hda_nid_t alc880_f1734_dac_nids[1] = {
+ 0x03
+};
+#define ALC880_F1734_HP_DAC 0x02
+
+static snd_kcontrol_new_t alc880_f1734_mixer[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ ALC_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
+
+/* FIXME! */
+/*
+ * ALC880 ASUS model
+ *
+ * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
+ * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
+ * Mic = 0x18, Line = 0x1a
+ */
+
+#define alc880_asus_dac_nids alc880_w810_dac_nids /* identical with w810 */
+#define alc880_asus_modes alc880_threestack_modes /* 2/6 channel mode */
+
+static snd_kcontrol_new_t alc880_asus_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT),
- HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
},
{ } /* end */
};
+
+/* FIXME! */
+/*
+ * ALC880 ASUS W1V model
+ *
+ * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
+ * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
+ * Mic = 0x18, Line = 0x1a, Line2 = 0x1b
+ */
+
+/* additional mixers to alc880_asus_mixer */
+static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = {
+ HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT),
+ HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT),
+ { } /* end */
+};
+
+
/*
+ * build control elements
*/
static int alc_build_controls(struct hda_codec *codec)
{
return 0;
}
+
/*
* initialize the codec volumes, etc
*/
-#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
-#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
-#define AMP_OUT_MUTE 0xb080
-#define AMP_OUT_UNMUTE 0xb000
-#define AMP_OUT_ZERO 0xb000
-#define PIN_IN 0x20
-#define PIN_VREF80 0x24
-#define PIN_VREF50 0x21
-#define PIN_OUT 0x40
-#define PIN_HP 0xc0
-
-static struct hda_verb alc880_init_verbs_three_stack[] = {
- /* Set pin widgets for output */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Line In pin widget for input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* unmute capture amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc880_volume_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* unmute capture1 amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* unmute capture2 amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* set vol=0 front mixer amp */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute front-out pin widget amp (no gain on this amp) */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 rear mixer amp */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* mute line-in pin widget amp left and right (no gain on this amp) */
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* set vol=0 clfe mixer amp */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* mute mic pin widget amp left and right (no gain on this amp) */
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- /* using rear surround as the path for headphone output */
- /* set vol=0 rear surround mixer amp */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* PASD 3 stack boards use the Mic 2 as the headphone output */
- /* need to program the selector associated with the Mic 2 pin widget to
- * surround path (index 0x01) for headphone output */
- {0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* unmute pin widget amp left and right (no gain on this amp) */
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* need to retask the Mic 2 pin widget to output */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer widget(nid=0x0B)
- * to support the input path of analog loopback
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
* Note: PASD motherboards uses the Line In 2 as the input for front panel
* mic (mic 2)
*/
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
- /* mute CD */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* unmute Line In */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* mute Mic 1 */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* mute Line In 2 (for PASD boards Mic 2) */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* Unmute input amps for the line out paths to support the output path of
- * analog loopback
- * the mixers on the output path has 2 inputs, one from the DAC and one
- * from the mixer
+ /*
+ * Set up output mixers (0x0c - 0x0f)
*/
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* Unmute Front out path */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute Surround (used as HP) out path */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute C/LFE out path */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute rear Surround out path */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{ }
};
-static struct hda_verb alc880_init_verbs_five_stack[] = {
- /* Set pin widgets for output */
+/*
+ * 3-stack pin configuration:
+ * front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b
+ */
+static struct hda_verb alc880_pin_3stack_init_verbs[] = {
+ /*
+ * preset connection lists of input pins
+ * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
+ */
+ {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
+ {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
+ {0x12, AC_VERB_SET_CONNECT_SEL, 0x03}, /* line/surround */
+
+ /*
+ * Set pin mode and muting
+ */
+ /* set front pin widgets 0x14 for output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Mic2 (as headphone out) for HP output */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Line In pin widget for input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line2 (as front mic) pin widget for input and vref at 80% */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* mute capture amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* mute amp1 left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* mute amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* set vol=0 front mixer amp */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute front-out pin widget amp (no gain on this amp) */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 rear mixer amp */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute rear-out pin widget (no gain on this amp) */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* set vol=0 clfe mixer amp */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* unmute clfe-pin widget amp (no gain on this amp) */
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* using rear surround as the path for headphone output */
- /* set vol=0 rear surround mixer amp */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* PASD 3 stack boards use the Mic 2 as the headphone output */
- /* need to program the selector associated with the Mic 2 pin widget to
- * surround path (index 0x01) for headphone output
- */
- {0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* mute pin widget amp left and right (no gain on this amp) */
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* need to retask the Mic 2 pin widget to output */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ { }
+};
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
- * widget(nid=0x0B) to support the input path of analog loopback
+/*
+ * 5-stack pin configuration:
+ * front = 0x14, surround = 0x17, clfe = 0x16, mic = 0x18, HP = 0x19,
+ * line-in/side = 0x1a, f-mic = 0x1b
+ */
+static struct hda_verb alc880_pin_5stack_init_verbs[] = {
+ /*
+ * preset connection lists of input pins
+ * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
*/
- /* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
- /* unmute CD */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* unmute Line In */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* unmute Mic 1 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* unmute Line In 2 (for PASD boards Mic 2) */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
+ {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/side */
- /* Unmute input amps for the line out paths to support the output path of
- * analog loopback
- * the mixers on the output path has 2 inputs, one from the DAC and
- * one from the mixer
+ /*
+ * Set pin mode and muting
*/
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* Unmute Front out path */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute Surround (used as HP) out path */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute C/LFE out path */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute rear Surround out path */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* set pin widgets 0x14-0x17 for output */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ /* unmute pins for output (no gain on this amp) */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Mic1 (rear panel) pin widget for input and vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Mic2 (as headphone out) for HP output */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Line In pin widget for input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line2 (as front mic) pin widget for input and vref at 80% */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{ }
};
-static struct hda_verb alc880_w810_init_verbs[] = {
- /* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* front channel selector/amp: output 0: unmuted, max volume */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* front out pin: muted, (no volume selection) */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+/*
+ * W810 pin configuration:
+ * front = 0x14, surround = 0x15, clfe = 0x16, HP = 0x1b
+ */
+static struct hda_verb alc880_pin_w810_init_verbs[] = {
+ /* hphone/speaker input selector: front DAC */
+ {0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
- /* front out pin: NOT headphone enable, out enable, vref disabled */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
-
- /* surround channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* surround channel selector/amp: input 1: capture mix: muted, (no volume selection) */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* surround channel selector/amp: output 0: unmuted, max volume */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* surround out pin: muted, (no volume selection) */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- /* surround out pin: NOT headphone enable, out enable, vref disabled */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
-
- /* c/lfe channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* c/lfe channel selector/amp: input 1: capture mix: muted, (no volume selection) */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* c/lfe channel selector/amp: output 0: unmuted, max volume */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* c/lfe out pin: muted, (no volume selection) */
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- /* c/lfe out pin: NOT headphone enable, out enable, vref disabled */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* hphone/speaker input selector: front DAC */
- {0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
-
- /* hphone/speaker out pin: muted, (no volume selection) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* hphone/speaker out pin: NOT headphone enable, out enable, vref disabled */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
-
{ }
};
-static struct hda_verb alc880_z71v_init_verbs[] = {
- /* front channel selector/amp: muted, DAC and mix (no vol) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* front channel selector/amp: output 0: vol=0 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* front out pin: unmuted, (no volume selection) */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* front out pin: NOT headphone enable, out enable, vref disabled */
+/*
+ * Z71V pin configuration:
+ * Speaker-out = 0x14, HP = 0x15, Mic = 0x18, Line-in = 0x1a, Mic2 = 0x1b (?)
+ */
+static struct hda_verb alc880_pin_z71v_init_verbs[] = {
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* headphone channel selector/amp: muted, DAC and mix (no vol) */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* headphone channel selector/amp: output 0: vol=0 */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* headphone out pin: muted, (no volume selection) */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* headpohne out pin: headphone enable, out enable, vref disabled */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Line In pin widget for input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* unmute amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* unmute amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* unmute amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* set connection select to mic in */
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
- * widget(nid=0x0B) to support the input path of analog loopback
- */
- /* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
- /* unmute CD */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* unmute Line In */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* unmute Mic 1 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* unmute Line In 2 (for PASD boards Mic 2) */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{ }
};
-//pshou 05/24/05
-static struct hda_verb alc880_six_stack_init_verbs[] = {
+/*
+ * 6-stack pin configuration:
+ * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18, f-mic = 0x19,
+ * line = 0x1a, HP = 0x1b
+ */
+static struct hda_verb alc880_pin_6stack_init_verbs[] = {
+ {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
+
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ { }
+};
+
+/* FIXME! */
+/*
+ * F1734 pin configuration:
+ * HP = 0x14, speaker-out = 0x15, mic = 0x18
+ */
+static struct hda_verb alc880_pin_f1734_init_verbs[] = {
{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* unmute amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x02},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
- * widget(nid=0x0B) to support the input path of analog loopback
- */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* unmute Line In */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* unmute Mic 1 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* unmute Mic 2 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* Unmute Front out path */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute Surround (used as HP) out path */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute C/LFE out path */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mute */
- /* Unmute rear Surround out path */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- { }
-};
-static struct hda_verb alc880_2_jack_init_verbs[] = {
- /* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x02},
- {0x0C, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1B, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
- {0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
{ }
};
-static struct hda_verb alc880_asus_init_verbs[] = {
+/* FIXME! */
+/*
+ * ASUS pin configuration:
+ * HP/front = 0x14, surr = 0x15, clfe = 0x16, mic = 0x18, line = 0x1a
+ */
+static struct hda_verb alc880_pin_asus_init_verbs[] = {
{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
- /* unmute CD */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* unmute Line In */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* unmute Mic 1 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* unmute Line In 2 (for PASD boards Mic 2) */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ { }
+};
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* Unmute Front out path */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute Surround (used as HP) out path */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute C/LFE out path */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+/* Enable GPIO mask and set output */
+static struct hda_verb alc880_gpio1_init_verbs[] = {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+};
- { }
+/* Enable GPIO mask and set output */
+static struct hda_verb alc880_gpio2_init_verbs[] = {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02},
};
+/*
+ */
+
static int alc_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- snd_hda_sequence_write(codec, spec->init_verbs);
+ unsigned int i;
+
+ for (i = 0; i < spec->num_init_verbs; i++)
+ snd_hda_sequence_write(codec, spec->init_verbs[i]);
return 0;
}
int i;
alc_init(codec);
- for (i = 0; i < spec->num_mixers; i++) {
+ for (i = 0; i < spec->num_mixers; i++)
snd_hda_resume_ctls(codec, spec->mixers[i]);
- }
if (spec->multiout.dig_out_nid)
snd_hda_resume_spdif_out(codec);
if (spec->dig_in_nid)
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
- .nid = 0x02, /* NID to query formats and rates */
+ /* NID is set in alc_build_pcms */
.ops = {
.open = alc880_playback_pcm_open,
.prepare = alc880_playback_pcm_prepare,
.substreams = 2,
.channels_min = 2,
.channels_max = 2,
- .nid = 0x08, /* NID to query formats and rates
- * (0x07 might be broken on some devices)
- */
+ /* NID is set in alc_build_pcms */
.ops = {
.prepare = alc880_capture_pcm_prepare,
.cleanup = alc880_capture_pcm_cleanup
info->name = spec->stream_name_analog;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0];
info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0;
for (i = 0; i < spec->num_channel_mode; i++) {
static void alc_free(struct hda_codec *codec)
{
- kfree(codec->spec);
+ struct alc_spec *spec = codec->spec;
+ unsigned int i;
+
+ if (! spec)
+ return;
+
+ if (spec->kctl_alloc) {
+ for (i = 0; i < spec->num_kctl_used; i++)
+ kfree(spec->kctl_alloc[i].name);
+ kfree(spec->kctl_alloc);
+ }
+ kfree(spec);
}
/*
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG },
{ .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG },
- { .modelname = "asua", .config = ALC880_ASUS },
+ { .modelname = "asus", .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1973, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x19b3, .config = ALC880_ASUS_DIG },
* configuration template - to be copied to the spec instance
*/
struct alc_config_preset {
- snd_kcontrol_new_t *mixers;
- unsigned int front_panel: 1; /* optional */
- unsigned int gpio_payload; /* optional */
- struct hda_verb *init_verbs;
+ snd_kcontrol_new_t *mixers[4];
+ const struct hda_verb *init_verbs[4];
unsigned int num_dacs;
hda_nid_t *dac_nids;
hda_nid_t dig_out_nid; /* optional */
static struct alc_config_preset alc880_presets[] = {
[ALC880_3ST] = {
- .mixers = alc880_base_mixer,
- .init_verbs = alc880_init_verbs_three_stack,
+ .mixers = { alc880_three_stack_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
- .front_panel = 1,
.dac_nids = alc880_dac_nids,
- .hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_3ST_DIG] = {
- .mixers = alc880_base_mixer,
- .init_verbs = alc880_init_verbs_three_stack,
+ .mixers = { alc880_three_stack_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
- .front_panel = 1,
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_5ST] = {
- .mixers = alc880_five_stack_mixer,
- .init_verbs = alc880_init_verbs_five_stack,
- .front_panel = 1,
+ .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer},
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
- .hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
.channel_mode = alc880_fivestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_5ST_DIG] = {
- .mixers = alc880_five_stack_mixer,
- .init_verbs = alc880_init_verbs_five_stack,
- .front_panel = 1,
+ .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
.channel_mode = alc880_fivestack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_6ST_DIG] = {
- .mixers = alc880_six_stack_mixer,
- .init_verbs = alc880_six_stack_init_verbs,
- .front_panel = 1,
+ .mixers = { alc880_six_stack_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
.dac_nids = alc880_6st_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
.channel_mode = alc880_sixstack_modes,
.input_mux = &alc880_6stack_capture_source,
},
[ALC880_W810] = {
- .mixers = alc880_w810_base_mixer,
- .init_verbs = alc880_w810_init_verbs,
- .gpio_payload = 0x2,
+ .mixers = { alc880_w810_base_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
.dac_nids = alc880_w810_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- // No dedicated headphone socket - it's shared with built-in speakers.
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
.channel_mode = alc880_w810_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_Z71V] = {
- .mixers = alc880_z71v_mixer,
- .init_verbs = alc880_z71v_init_verbs,
+ .mixers = { alc880_z71v_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs,
+ alc880_gpio2_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids),
.dac_nids = alc880_z71v_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_z71v_modes),
- .channel_mode = alc880_z71v_modes,
+ .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
+ .channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_F1734] = {
- .mixers = alc880_2_jack_mixer,
- .init_verbs = alc880_2_jack_init_verbs,
- .num_dacs = ARRAY_SIZE(alc880_dac_nids),
- .dac_nids = alc880_dac_nids,
- .hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_z71v_modes),
- .channel_mode = alc880_z71v_modes,
+ .mixers = { alc880_f1734_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_f1734_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids),
+ .dac_nids = alc880_f1734_dac_nids,
+ .hp_nid = 0x02,
+ .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
+ .channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS] = {
- .mixers = alc880_asus_mixer,
- .init_verbs = alc880_asus_init_verbs,
- .gpio_payload = 0x1,
- .front_panel = 1,
- .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
- .dac_nids = alc880_w810_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
+ .mixers = { alc880_asus_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
+ .dac_nids = alc880_asus_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
+ .channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_DIG] = {
- .mixers = alc880_asus_mixer,
- .init_verbs = alc880_asus_init_verbs,
- .gpio_payload = 0x1,
- .front_panel = 1,
- .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
- .dac_nids = alc880_w810_dac_nids,
+ .mixers = { alc880_asus_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
+ .dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
+ .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
+ .channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_W1V] = {
- .mixers = alc880_asus_w1v_mixer,
- .init_verbs = alc880_asus_init_verbs,
- .gpio_payload = 0x1,
- .front_panel = 1,
- .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
- .dac_nids = alc880_w810_dac_nids,
+ .mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
+ .dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
+ .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
+ .channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
[ALC880_UNIWILL_DIG] = {
- .mixers = alc880_asus_mixer,
- .init_verbs = alc880_asus_init_verbs,
- .num_dacs = ARRAY_SIZE(alc880_dac_nids),
- .dac_nids = alc880_dac_nids,
+ .mixers = { alc880_asus_mixer },
+ .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
+ .dac_nids = alc880_asus_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .hp_nid = 0x03,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
+ .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
+ .channel_mode = alc880_asus_modes,
.input_mux = &alc880_capture_source,
},
#ifdef CONFIG_SND_DEBUG
[ALC880_TEST] = {
- .mixers = alc880_test_mixer,
- .init_verbs = alc880_test_init_verbs,
+ .mixers = { alc880_test_mixer },
+ .init_verbs = { alc880_test_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_test_dac_nids),
.dac_nids = alc880_test_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc880_adc_nids),
- .adc_nids = alc880_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc880_test_modes),
.channel_mode = alc880_test_modes,
.input_mux = &alc880_test_capture_source,
#endif
};
+/*
+ * Automatic parse of I/O pins from the BIOS configuration
+ */
+
+#define NUM_CONTROL_ALLOC 32
+#define NUM_VERB_ALLOC 32
+
+enum {
+ ALC_CTL_WIDGET_VOL,
+ ALC_CTL_WIDGET_MUTE,
+ ALC_CTL_BIND_MUTE,
+};
+static snd_kcontrol_new_t alc880_control_templates[] = {
+ HDA_CODEC_VOLUME(NULL, 0, 0, 0),
+ HDA_CODEC_MUTE(NULL, 0, 0, 0),
+ ALC_BIND_MUTE(NULL, 0, 0, 0),
+};
+
+/* add dynamic controls */
+static int add_control(struct alc_spec *spec, int type, const char *name, unsigned long val)
+{
+ snd_kcontrol_new_t *knew;
+
+ if (spec->num_kctl_used >= spec->num_kctl_alloc) {
+ int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
+
+ knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
+ if (! knew)
+ return -ENOMEM;
+ if (spec->kctl_alloc) {
+ memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
+ kfree(spec->kctl_alloc);
+ }
+ spec->kctl_alloc = knew;
+ spec->num_kctl_alloc = num;
+ }
+
+ knew = &spec->kctl_alloc[spec->num_kctl_used];
+ *knew = alc880_control_templates[type];
+ knew->name = snd_kmalloc_strdup(name, GFP_KERNEL);
+ if (! knew->name)
+ return -ENOMEM;
+ knew->private_value = val;
+ spec->num_kctl_used++;
+ return 0;
+}
+
+#define alc880_is_fixed_pin(nid) ((nid) >= 0x14 && (nid) <= 0x17)
+#define alc880_fixed_pin_idx(nid) ((nid) - 0x14)
+#define alc880_is_multi_pin(nid) ((nid) >= 0x18)
+#define alc880_multi_pin_idx(nid) ((nid) - 0x18)
+#define alc880_is_input_pin(nid) ((nid) >= 0x18)
+#define alc880_input_pin_idx(nid) ((nid) - 0x18)
+#define alc880_idx_to_dac(nid) ((nid) + 0x02)
+#define alc880_dac_to_idx(nid) ((nid) - 0x02)
+#define alc880_idx_to_mixer(nid) ((nid) + 0x0c)
+#define alc880_idx_to_selector(nid) ((nid) + 0x10)
+#define ALC880_PIN_CD_NID 0x1c
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+{
+ hda_nid_t nid;
+ int assigned[4];
+ int i, j;
+
+ memset(assigned, 0, sizeof(assigned));
+
+ /* check the pins hardwired to audio widget */
+ for (i = 0; i < cfg->line_outs; i++) {
+ nid = cfg->line_out_pins[i];
+ if (alc880_is_fixed_pin(nid)) {
+ int idx = alc880_fixed_pin_idx(nid);
+ spec->multiout.dac_nids[i] = alc880_dac_to_idx(idx);
+ assigned[idx] = 1;
+ }
+ }
+ /* left pins can be connect to any audio widget */
+ for (i = 0; i < cfg->line_outs; i++) {
+ nid = cfg->line_out_pins[i];
+ if (alc880_is_fixed_pin(nid))
+ continue;
+ /* search for an empty channel */
+ for (j = 0; j < cfg->line_outs; j++) {
+ if (! assigned[j]) {
+ spec->multiout.dac_nids[i] = alc880_idx_to_dac(j);
+ assigned[j] = 1;
+ break;
+ }
+ }
+ }
+ spec->multiout.num_dacs = cfg->line_outs;
+ return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+{
+ char name[32];
+ static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
+ hda_nid_t nid;
+ int i, err;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (! spec->multiout.dac_nids[i])
+ continue;
+ nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
+ if (i == 2) {
+ /* Center/LFE */
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 2, HDA_INPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 2, HDA_INPUT))) < 0)
+ return err;
+ } else {
+ sprintf(name, "%s Playback Volume", chname[i]);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ sprintf(name, "%s Playback Switch", chname[i]);
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/* add playback controls for HP output */
+static int alc880_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
+{
+ hda_nid_t nid;
+ int err;
+
+ if (! pin)
+ return 0;
+
+ if (alc880_is_fixed_pin(pin)) {
+ nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
+ if (! spec->multiout.dac_nids[0]) {
+ /* use this as the primary output */
+ spec->multiout.dac_nids[0] = nid;
+ if (! spec->multiout.num_dacs)
+ spec->multiout.num_dacs = 1;
+ } else
+ /* specify the DAC as the extra HP output */
+ spec->multiout.hp_nid = nid;
+ /* control HP volume/switch on the output mixer amp */
+ nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
+ return err;
+ } else if (alc880_is_multi_pin(pin)) {
+ /* set manual connection */
+ if (! spec->multiout.dac_nids[0]) {
+ /* use this as the primary output */
+ spec->multiout.dac_nids[0] = alc880_idx_to_dac(alc880_multi_pin_idx(pin));
+ if (! spec->multiout.num_dacs)
+ spec->multiout.num_dacs = 1;
+ }
+ /* we have only a switch on HP-out PIN */
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ }
+ return 0;
+}
+
+/* create input playback/capture controls for the given pin */
+static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname)
+{
+ char name[32];
+ int err, idx;
+
+ sprintf(name, "%s Playback Volume", ctlname);
+ idx = alc880_input_pin_idx(pin);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
+ return err;
+ sprintf(name, "%s Playback Switch", ctlname);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(0x0b, 3, idx, HDA_INPUT))) < 0)
+ return err;
+ return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+{
+ static char *labels[AUTO_PIN_LAST] = {
+ "Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
+ };
+ struct hda_input_mux *imux = &spec->private_imux;
+ int i, err;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (alc880_is_input_pin(cfg->input_pins[i])) {
+ err = new_analog_input(spec, cfg->input_pins[i], labels[i]);
+ if (err < 0)
+ return err;
+ imux->items[imux->num_items].label = labels[i];
+ imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]);
+ imux->num_items++;
+ }
+ }
+ return 0;
+}
+
+static void alc880_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type,
+ int dac_idx)
+{
+ /* set as output */
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ /* need the manual connection? */
+ if (alc880_is_multi_pin(nid)) {
+ struct alc_spec *spec = codec->spec;
+ int idx = alc880_multi_pin_idx(nid);
+ snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
+ AC_VERB_SET_CONNECT_SEL,
+ alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
+ }
+}
+
+static void alc880_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < spec->autocfg.line_outs; i++) {
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ alc880_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ }
+}
+
+static void alc880_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pin;
+ if (pin) /* connect to front */
+ alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+}
+
+static void alc880_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if (alc880_is_input_pin(nid)) {
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ if (nid != ALC880_PIN_CD_NID)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+ }
+}
+
+/* parse the BIOS configuration and set up the alc_spec */
+/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
+static int alc880_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+
+ if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
+ return err;
+ if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0)
+ return err;
+ if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
+ return 0; /* can't find valid BIOS pin config */
+ if ((err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
+ (err = alc880_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
+ (err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ return err;
+
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
+ if (spec->autocfg.dig_in_pin)
+ spec->dig_in_nid = ALC880_DIGIN_NID;
+
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->init_verbs[spec->num_init_verbs++] = alc880_volume_init_verbs;
+
+ spec->input_mux = &spec->private_imux;
+
+ return 1;
+}
+
+/* init callback for auto-configuration model -- overriding the default init */
+static int alc880_auto_init(struct hda_codec *codec)
+{
+ alc_init(codec);
+ alc880_auto_init_multi_out(codec);
+ alc880_auto_init_hp_out(codec);
+ alc880_auto_init_analog_input(codec);
+ return 0;
+}
+
+/*
+ * OK, here we have finally the patch for ALC880
+ */
+
static int patch_alc880(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
- const struct alc_config_preset *preset;
+ int i, err;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl);
if (board_config < 0 || board_config >= ALC880_MODEL_LAST) {
- snd_printd(KERN_INFO "hda_codec: Unknown model for ALC880\n");
- board_config = ALC880_3ST;
+ printk(KERN_INFO "hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...\n");
+ board_config = ALC880_AUTO;
}
- preset = &alc880_presets[board_config];
-
- spec->mixers[spec->num_mixers] = preset->mixers;
- snd_assert(spec->mixers[0], kfree(spec);return -EINVAL);
- spec->num_mixers++;
- /* some MBs need GPIO setup */
- if (preset->gpio_payload) {
- /* Enable mask and set output */
- snd_hda_codec_write(codec, codec->afg, 0,
- AC_VERB_SET_GPIO_MASK, preset->gpio_payload);
- snd_hda_codec_write(codec, codec->afg, 0,
- AC_VERB_SET_GPIO_DIRECTION, preset->gpio_payload);
- snd_hda_codec_write(codec, codec->afg, 0,
- AC_VERB_SET_GPIO_DATA, preset->gpio_payload);
+ if (board_config == ALC880_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc880_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...\n");
+ board_config = ALC880_3ST;
+ }
}
- spec->front_panel = preset->front_panel;
- spec->init_verbs = preset->init_verbs;
- spec->channel_mode = preset->channel_mode;
- spec->num_channel_mode = preset->num_channel_mode;
+ if (board_config != ALC880_AUTO) {
+ /* set up from the preset table */
+ const struct alc_config_preset *preset;
+
+ preset = &alc880_presets[board_config];
+
+ for (i = 0; preset->mixers[i]; i++) {
+ snd_assert(spec->num_mixers < ARRAY_SIZE(spec->mixers), break);
+ spec->mixers[spec->num_mixers++] = preset->mixers[i];
+ }
+ for (i = 0; preset->init_verbs[i]; i++) {
+ snd_assert(spec->num_init_verbs < ARRAY_SIZE(spec->init_verbs), break);
+ spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
+ }
+
+ spec->channel_mode = preset->channel_mode;
+ spec->num_channel_mode = preset->num_channel_mode;
+
+ spec->multiout.max_channels = spec->channel_mode[0].channels;
+
+ spec->multiout.num_dacs = preset->num_dacs;
+ spec->multiout.dac_nids = preset->dac_nids;
+ spec->multiout.dig_out_nid = preset->dig_out_nid;
+ spec->multiout.hp_nid = preset->hp_nid;
+
+ spec->input_mux = preset->input_mux;
+
+ spec->num_adc_nids = preset->num_adc_nids;
+ spec->adc_nids = preset->adc_nids;
+ }
spec->stream_name_analog = "ALC880 Analog";
spec->stream_analog_playback = &alc880_pcm_analog_playback;
spec->stream_digital_playback = &alc880_pcm_digital_playback;
spec->stream_digital_capture = &alc880_pcm_digital_capture;
- spec->multiout.max_channels = spec->channel_mode[0].channels;
-
- spec->multiout.num_dacs = preset->num_dacs;
- spec->multiout.dac_nids = preset->adc_nids;
- spec->multiout.dig_out_nid = preset->dig_out_nid;
- spec->multiout.hp_nid = preset->hp_nid;
-
- spec->input_mux = preset->input_mux;
- spec->num_adc_nids = preset->num_adc_nids;
- spec->adc_nids = preset->adc_nids;
+ if (! spec->adc_nids && spec->input_mux) {
+ /* check whether NID 0x07 is valid */
+ unsigned int wcap = snd_hda_param_read(codec, alc880_adc_nids[0],
+ AC_PAR_AUDIO_WIDGET_CAP);
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ if (wcap != AC_WID_AUD_IN) {
+ spec->adc_nids = alc880_adc_nids_alt;
+ spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
+ spec->mixers[spec->num_mixers] = alc880_capture_alt_mixer;
+ spec->num_mixers++;
+ } else {
+ spec->adc_nids = alc880_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
+ spec->mixers[spec->num_mixers] = alc880_capture_mixer;
+ spec->num_mixers++;
+ }
+ }
codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC880_AUTO)
+ codec->patch_ops.init = alc880_auto_init;
return 0;
}
+
/*
* ALC260 support
*/
+static hda_nid_t alc260_dac_nids[1] = {
+ /* front */
+ 0x02,
+};
+
+static hda_nid_t alc260_adc_nids[1] = {
+ /* ADC0 */
+ 0x04,
+};
+
+static hda_nid_t alc260_hp_adc_nids[1] = {
+ /* ADC1 */
+ 0x05,
+};
+
+#define ALC260_DIGOUT_NID 0x03
+#define ALC260_DIGIN_NID 0x06
+
+static struct hda_input_mux alc260_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
/*
* This is just place-holder, so there's something for alc_build_pcms to look
* at when it calculates the maximum number of channels. ALC260 has no mixer
{ 2, NULL },
};
-snd_kcontrol_new_t alc260_base_mixer[] = {
+static snd_kcontrol_new_t alc260_base_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
{ } /* end */
};
-snd_kcontrol_new_t alc260_hp_mixer[] = {
+static snd_kcontrol_new_t alc260_hp_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
ALC_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
- .nid = 0x2,
};
static struct hda_pcm_stream alc260_pcm_analog_capture = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
- .nid = 0x4,
};
static struct hda_board_config alc260_cfg_tbl[] = {
switch (board_config) {
case ALC260_HP:
- spec->mixers[spec->num_mixers] = alc260_base_mixer;
+ spec->mixers[spec->num_mixers] = alc260_hp_mixer;
spec->num_mixers++;
break;
default:
break;
}
- spec->init_verbs = alc260_init_verbs;
+ spec->init_verbs[0] = alc260_init_verbs;
+ spec->num_init_verbs = 1;
+
spec->channel_mode = alc260_modes;
spec->num_channel_mode = ARRAY_SIZE(alc260_modes);
spec->input_mux = &alc260_capture_source;
switch (board_config) {
case ALC260_HP:
- spec->stream_analog_capture->nid = 5;
spec->num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids);
spec->adc_nids = alc260_hp_adc_nids;
break;
return 0;
}
+
/*
* ALC882 support
*
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Front Pin: to output mode */
+ /* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Front Pin: mute amp left and right (no volume) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* select Front mixer (0x0c, index 0) */
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Rear Pin */
+ /* Rear Pin: output 1 (0x0d) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Rear Pin: mute amp left and right (no volume) */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* select Rear mixer (0x0d, index 1) */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* CLFE Pin */
+ /* CLFE Pin: output 2 (0x0e) */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* CLFE Pin: mute amp left and right (no volume) */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* select CLFE mixer (0x0e, index 2) */
{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* Side Pin */
+ /* Side Pin: output 3 (0x0f) */
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Side Pin: mute amp left and right (no volume) */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* select Side mixer (0x0f, index 3) */
{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
- /* Headphone Pin */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* Headphone Pin: mute amp left and right (no volume) */
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* select Front mixer (0x0c, index 0) */
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Mic (rear) pin widget for input and vref at 80% */
+ /* Mic (rear) pin: input vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Front Mic pin widget for input and vref at 80% */
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- /* Line In pin widget for input */
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line-2 In: Headphone output (output 0 - 0x0c) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
/* CD pin widget for input */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
spec->dig_in_nid = ALC880_DIGIN_NID;
- spec->front_panel = 1;
- spec->init_verbs = alc882_init_verbs;
+ spec->init_verbs[0] = alc882_init_verbs;
+ spec->num_init_verbs = 1;
+
spec->channel_mode = alc882_ch_modes;
spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes);
git.openpandora.org / pandora-kernel.git / commitdiff