--- /dev/null
+/*
+ * include/asm-arm/arch-realview/board-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBA8_H
+#define __ASM_ARCH_BOARD_PBA8_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */
+#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */
+#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */
+#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */
+#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
+#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
+#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */
+#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
+#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
+#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */
+#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */
+#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
+#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
+#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */
+#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */
+#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
+#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
+#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
+#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
+#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */
+#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
+#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
+#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
+#define REALVIEW_PBA8_FLASH1_BASE 0x44000000
+#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M
+#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */
+#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */
+#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
+#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */
+#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
+#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
+
+#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74
+
+/*
+ * PBA8 PCI regions
+ */
+#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */
+#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
+#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
+
+#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */
+#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
+#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
+
+/*
+ * Irqs
+ */
+#define IRQ_PBA8_GIC_START 32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
+#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
+#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
+#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
+#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC -1
+#define IRQ_PBA8_SCTL -1
+
+#define NR_GIC_PBA8 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBA8
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif /* __ASM_ARCH_BOARD_PBA8_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-realview/realview_pba8.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pba8.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_pba8_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#ifdef CONFIG_PCI
+ {
+ .virtual = PCIX_UNIT_BASE,
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_PCI_BASE),
+ .length = REALVIEW_PBA8_PCI_BASE_SIZE,
+ .type = MT_DEVICE
+ },
+#endif
+#ifdef CONFIG_DEBUG_LL
+ {
+ .virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+};
+
+static void __init realview_pba8_map_io(void)
+{
+ iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
+}
+
+/*
+ * RealView PBA8Core AMBA devices
+ */
+
+#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
+#define GPIO2_DMA { 0, 0 }
+#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
+#define GPIO3_DMA { 0, 0 }
+#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
+#define AACI_DMA { 0x80, 0x81 }
+#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
+#define MMCI0_DMA { 0x84, 0 }
+#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
+#define KMI0_DMA { 0, 0 }
+#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
+#define KMI1_DMA { 0, 0 }
+#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
+#define PBA8_SMC_DMA { 0, 0 }
+#define MPMC_IRQ { NO_IRQ, NO_IRQ }
+#define MPMC_DMA { 0, 0 }
+#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
+#define PBA8_CLCD_DMA { 0, 0 }
+#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
+#define DMAC_DMA { 0, 0 }
+#define SCTL_IRQ { NO_IRQ, NO_IRQ }
+#define SCTL_DMA { 0, 0 }
+#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
+#define PBA8_WATCHDOG_DMA { 0, 0 }
+#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
+#define PBA8_GPIO0_DMA { 0, 0 }
+#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
+#define GPIO1_DMA { 0, 0 }
+#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
+#define PBA8_RTC_DMA { 0, 0 }
+#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
+#define SCI_DMA { 7, 6 }
+#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
+#define PBA8_UART0_DMA { 15, 14 }
+#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
+#define PBA8_UART1_DMA { 13, 12 }
+#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
+#define PBA8_UART2_DMA { 11, 10 }
+#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
+#define PBA8_UART3_DMA { 0x86, 0x87 }
+#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
+#define PBA8_SSP_DMA { 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:f2", PBA8_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:f3", PBA8_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", PBA8_SSP, NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd, "issp:20", PBA8_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &dmac_device,
+ &uart0_device,
+ &uart1_device,
+ &uart2_device,
+ &uart3_device,
+ &smc_device,
+ &clcd_device,
+ &sctl_device,
+ &wdog_device,
+ &gpio0_device,
+ &gpio1_device,
+ &gpio2_device,
+ &rtc_device,
+ &sci0_device,
+ &ssp0_device,
+ &aaci_device,
+ &mmc0_device,
+ &kmi0_device,
+ &kmi1_device,
+};
+
+/*
+ * RealView PB-A8 platform devices
+ */
+static struct resource realview_pba8_flash_resource[] = {
+ [0] = {
+ .start = REALVIEW_PBA8_FLASH0_BASE,
+ .end = REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PBA8_FLASH1_BASE,
+ .end = REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource realview_pba8_smsc911x_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBA8_ETH_BASE,
+ .end = REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PBA8_ETH,
+ .end = IRQ_PBA8_ETH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device realview_pba8_smsc911x_device = {
+ .name = "smc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(realview_pba8_smsc911x_resources),
+ .resource = realview_pba8_smsc911x_resources,
+};
+
+struct resource realview_pba8_cf_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBA8_CF_BASE,
+ .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PBA8_CF_MEM_BASE,
+ .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = -1, /* FIXME: Find correct irq */
+ .end = -1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device realview_pba8_cf_device = {
+ .name = "compactflash",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(realview_pba8_cf_resources),
+ .resource = realview_pba8_cf_resources,
+};
+
+static void __init gic_init_irq(void)
+{
+ /* ARM PB-A8 on-board GIC */
+ gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START);
+ gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
+}
+
+static void __init realview_pba8_timer_init(void)
+{
+ timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
+ timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
+ timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
+ timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+
+ realview_timer_init(IRQ_PBA8_TIMER0_1);
+}
+
+static struct sys_timer realview_pba8_timer = {
+ .init = realview_pba8_timer_init,
+};
+
+static void __init realview_pba8_init(void)
+{
+ int i;
+
+ realview_flash_register(realview_pba8_flash_resource,
+ ARRAY_SIZE(realview_pba8_flash_resource));
+ platform_device_register(&realview_pba8_smsc911x_device);
+ platform_device_register(&realview_i2c_device);
+ platform_device_register(&realview_pba8_cf_device);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+#ifdef CONFIG_LEDS
+ leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
+ /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+ .phys_io = REALVIEW_PBA8_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = realview_pba8_map_io,
+ .init_irq = gic_init_irq,
+ .timer = &realview_pba8_timer,
+ .init_machine = realview_pba8_init,
+MACHINE_END
git.openpandora.org / pandora-kernel.git / commitdiff