[POWERPC] Add correct interrupt property for pegasos ide

The firmware assigns irq 20/21 to the VIA IDE device on Pegasos.
But the required interrupt is 14/15.
Maybe someone confused decimal vs. hexadecimal values.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 4fb5938..e27d9d1 100644 (file)
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2035,39 +2035,50 @@ static void __init fixup_device_tree_maple(void)
 #endif
 
 #ifdef CONFIG_PPC_CHRP
-/* Pegasos and BriQ lacks the "ranges" property in the isa node */
+/*
+ * Pegasos and BriQ lacks the "ranges" property in the isa node
+ * Pegasos needs decimal IRQ 14/15, not hexadecimal
+ */
 static void __init fixup_device_tree_chrp(void)
 {
-       phandle isa;
-       u32 isa_ranges[6];
+       phandle ph;
+       u32 prop[6];
        u32 rloc = 0x01006000; /* IO space; PCI device = 12 */
        char *name;
        int rc;
 
        name = "/pci@80000000/isa@c";
-       isa = call_prom("finddevice", 1, 1, ADDR(name));
-       if (!PHANDLE_VALID(isa)) {
+       ph = call_prom("finddevice", 1, 1, ADDR(name));
+       if (!PHANDLE_VALID(ph)) {
                name = "/pci@ff500000/isa@6";
-               isa = call_prom("finddevice", 1, 1, ADDR(name));
+               ph = call_prom("finddevice", 1, 1, ADDR(name));
                rloc = 0x01003000; /* IO space; PCI device = 6 */
        }
-       if (!PHANDLE_VALID(isa))
-               return;
-
-       rc = prom_getproplen(isa, "ranges");
-       if (rc != 0 && rc != PROM_ERROR)
-               return;
-
-       prom_printf("Fixing up missing ISA range on Pegasos...\n");
+       if (PHANDLE_VALID(ph)) {
+               rc = prom_getproplen(ph, "ranges");
+               if (rc == 0 || rc == PROM_ERROR) {
+                       prom_printf("Fixing up missing ISA range on Pegasos...\n");
+
+                       prop[0] = 0x1;
+                       prop[1] = 0x0;
+                       prop[2] = rloc;
+                       prop[3] = 0x0;
+                       prop[4] = 0x0;
+                       prop[5] = 0x00010000;
+                       prom_setprop(ph, name, "ranges", prop, sizeof(prop));
+               }
+       }
 
-       isa_ranges[0] = 0x1;
-       isa_ranges[1] = 0x0;
-       isa_ranges[2] = rloc;
-       isa_ranges[3] = 0x0;
-       isa_ranges[4] = 0x0;
-       isa_ranges[5] = 0x00010000;
-       prom_setprop(isa, name, "ranges",
-                       isa_ranges, sizeof(isa_ranges));
+       name = "/pci@80000000/ide@C,1";
+       ph = call_prom("finddevice", 1, 1, ADDR(name));
+       if (PHANDLE_VALID(ph)) {
+               prom_printf("Fixing up IDE interrupt on Pegasos...\n");
+               prop[0] = 14;
+               prop[1] = 0x0;
+               prop[2] = 15;
+               prop[3] = 0x0;
+               prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32));
+       }
 }
 #else
 #define fixup_device_tree_chrp()

diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a508550..8cc5423 100644 (file)
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -35,10 +35,6 @@
 #include <linux/ide.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_PPC_CHRP
-#include <asm/processor.h>
-#endif
-
 #include "ide-timing.h"
 
 #define DISPLAY_VIA_TIMINGS
@@ -436,13 +432,6 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
        hwif->tuneproc = &via82cxxx_tune_drive;
        hwif->speedproc = &via_set_drive;
 
-
-#ifdef CONFIG_PPC_CHRP
-       if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
-               hwif->irq = hwif->channel ? 15 : 14;
-       }
-#endif
-
        for (i = 0; i < 2; i++) {
                hwif->drives[i].io_32bit = 1;
                hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;