+++ /dev/null
-XFCE4;The full desktop Environment;startxfce4;xfce4-session-logout --logout
-MiniMenu;A very simple but flexible menu;startmmenu;stopmmenu
+++ /dev/null
-# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
-
-# The loopback interface
-auto lo
-iface lo inet loopback
-
-# Wireless interfaces
-iface wlan0 inet dhcp
- wireless_mode managed
- wireless_essid any
- wpa-driver wext
- wpa-conf /etc/wpa_supplicant.conf
-
-# Bluetooth networking
-iface bnep0 inet dhcp
-
+++ /dev/null
-# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
-
-# The loopback interface
-auto lo
-iface lo inet loopback
-
-# Wireless interfaces
-iface wlan0 inet dhcp
- wireless_mode managed
- wireless_essid any
- wpa-driver wext
- wpa-conf /etc/wpa_supplicant.conf
-
-# Bluetooth networking
-iface bnep0 inet dhcp
-
+++ /dev/null
-# for the mmenu 'minimenu'
-#
-
-# Note on overriding whats in a .pnd-application/PXML.xml
-# Note that you can perform icon name, clockspeed setting and category overrides via an .ovr file
-# Note that the icon can be overridden for a pnd-file by making a same-name .png file, in the same location
-# "Notes" can be added to an icon using the .ovr file, as well.
-
-# Skins
-# There is a a searchpath to find skin subdirs in; built in skins are in /etc/pandora/mmenu/skins,
-# so any subdirectory of that is a skin-name. (ie: /etc/pandora/mmenu/skins/default is skin named 'default')
-# Each skin will have its own mmskin.conf file defining how the skin works. All other options should be
-# here, so that skin-changes do not break user preferences
-
-[minimenu]
-skin_searchpath /media/*/pandora/mmenu/skins:/etc/pandora/mmenu/skins:./minimenu/skin
-skin_selected ~/.mmenuskinchoice
-skin_confname mmskin.conf
-pndrun /usr/pandora/scripts:./testdata/scripts # searchpath to locate "pnd_run.sh"; why aren't I looking in /etc/pandora/conf/apps for this?
-load_previews_now 0 # if >0, will try to load preview pics from pnds at boot time, not defer till later
-load_previews_later 1 # if >0, will try to load preview pics sometime (see defer_timer_ms as well)
-load_icons_later 0 # if >0, will try to load icons after grid is showing, not during app scanning
-defer_icon_us 100000 # when background loading icons (load_icons_later), time between icon loadsa
-threaded_preview 0 # if 1, will try to load the preview in background, to avoid slowing up navigation
-loglevel 0 # 0 is debug, lots of crap; 3 is better, means 'errors only'. Output may screw up the wrapper!
-x11_present_sh /bin/pidof X # command to invoke to determine if X11 is running or not; expects a number on X is present.
-desktop_apps 1 # search the pnd standard desktop searchpath for apps
-menu_apps 1 # search the pnd standard menu searchpath for apps
-aux_searchpath /media/*/pandora/mmenu:/usr/pandora/mmenu # if something here, also search this path; can be used for mmenu-only apps?
-
-[utility]
-terminal /usr/bin/Terminal # could also be /usr/bin/xterm, or a sh-script, or whatever
-
-[display]
-fullscreen 1 # 0 for windowed, >0 for fullscreen
-screen_width 800 # for some calculations
-
-[tabs]
-top_maincat 1 # include maincat in top tab bar
-top_maincat1 0 # include maincat subcat 1 in top tab bar
-top_maincat2 0 # include maincat subcat 1 in top tab bar
-top_altcat 1 # include alt cat in top tab bar
-top_altcat1 0 # include alt cat subcat 1 in top tab bar
-top_altcat2 0 # include alt cat subcat 1 in top tab bar
-wraparound 0 # if 1, last tab wraps around to first when going right; going left from first tab goes to last
-
-[grid]
-scroll_increment 4 # number of rows to scroll when jumping up or down (recommend 1, or same as row_max for full page jump)
-wrap_horiz_samerow 1 # if 0, wraps to prev/next row; if 1, stays on same row
-wrap_vert_stop 0 # if 0, wrap to other end; if 1, stops at top/bottom
-
-[previewpic]
-defer_timer_ms 1500 # after setting selection, how long to wait before we try to load the previewpic
-do_cache 1 # if 1, will try to cache previews to SD, for performance boost
-cache_searchpath /media/mmcblk[12]p? # devices to consider for caching to, in order
-cache_minfree 500 # if free space is less than this (in KB), move to next device
-cache_path /pandora/appdata/mmenu.pvwcache # where to write cached images to
-cache_findpath /media/mmcblk?p?/pandora/appdata/mmenu.pvwcache # where to look for cached preview pics
-
-[categories]
-catmap_searchpath /media/*/pandora/mmenu:/etc/pandora/mmenu:./minimenu
-catmap_confname mmcatmap.conf
-do_all_cat 1 # if >0, will show an All category; if 0, skip it, just your cats.
-#default_cat Game # if specified, will attempt to use the named category when mmenu starts, instead of 'leftmost' (usually All)
-
-[filesystem]
-do_browser 0 # if >0, will allow filesystem browsing
-tab_searchpaths /media/* # for each chunk in searchpath, show a tab (if not empty).
-# example:
-# /media -> show /media as a single tab
-# /media/* -> show a tab for each dir in /media
-# /media/mmcblk1p1:/media/mmcblk2p1 -> show 2 tabs, one for first partition on each SD
+++ /dev/null
-[Desktop Entry]
-Name=Toggle Bluetooth Status
-Comment=Toggle the status of your Bluetooth device.
-StartupNotify=false
-Exec=/usr/pandora/scripts/op_bluetooth.sh
-Icon=bluetooth
-Terminal=false
-Type=Application
-Categories=System;
+++ /dev/null
-#!/bin/sh
-#
-# Released under the GPL
-
-INTERFACE="`hciconfig | grep "^hci" | cut -d ':' -f 1`"
-LOCK="~/.op_btenabled"
-
-if [ $1 = "startup" ]; then
- [ -f "$LOCK" ] && sudo /usr/sbin/hciconfig "$INTERFACE" up pscan 1>/dev/null && sudo /usr/sbin/bluetoothd || echo "Bluetooth: User has not enabled Bluetooth."
-
-else
-
- # Figure out if Bluetooth is running or not
-
- if hciconfig "$INTERFACE" | grep UP &>/dev/null
- then
- notify-send -u normal "Bluetooth" "Bluetooth is being disabled..." -i blueman -t 5000
- sudo /usr/sbin/hciconfig ${INTERFACE} down 1>/dev/null
- rm -f "$LOCK"
- else
- pgrep bluetoothd
- echo $INTERFACE
- if [ $? -ne 1 ]; then
- notify-send -u normal "Bluetooth" "Bluetooth is being enabled..." -i blueman -t 5000
- sudo /usr/sbin/hciconfig ${INTERFACE} down 1>/dev/null
- sudo /usr/sbin/hciconfig ${INTERFACE} up pscan 1>/dev/null
- sudo /usr/sbin/bluetoothd 1>/dev/null
- touch "$LOCK"
-
- fi
- fi
-fi
+++ /dev/null
-#!/bin/bash
-TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
-zenity --info --title="Calibration" --text "The touchscreen has been calibrated. To activate the new settings, you have to reboot your unit."
\ No newline at end of file
+++ /dev/null
-#!/bin/sh
-
-# Set the timezone and date/time
-
-while ! timezone=$(zenity --list --title "Select your time zone" --text="Please select your time zone" --column="Select your time zone" --print-column=1 "GMT (London, Lisbon, Portugal, Casablanca, Morocco)" "GMT+1 (Paris, Berlin, Amsterdam, Bern, Stockholm)" "GMT+2 (Athens, Helsinki, Istanbul)" "GMT+3 (Kuwait, Nairobi, Riyadh, Moscow)" "GMT+4 (Abu Dhabi, Iraq, Muscat, Kabul)" "GMT+5 (Calcutta, Colombo, Islamabad, Madras, New Delhi)" "GMT+6 (Almaty, Dhakar, Kathmandu)" "GMT+7 (Bangkok, Hanoi, Jakarta)" "GMT+8 (Beijing, Hong Kong, Kuala Lumpar, Singapore, Taipei)" "GMT+9 (Osaka, Seoul, Sapporo, Tokyo, Yakutsk)" "GMT+10 (Brisbane, Melbourne, Sydney, Vladivostok)" "GMT+11 (Magadan, New Caledonia, Solomon Is)" "GMT+12 (Auckland, Fiji, Kamchatka, Marshall Is., Wellington, Suva)" "GMT-1 (Azores, Cape Verde Is.)" "GMT-2 (Mid-Atlantic)" "GMT-3 (Brasilia, Buenos Aires, Georgetown)" "GMT-4 (Atlantic Time, Caracas)" "GMT-5 (Bogota, Lima, New York)" "GMT-6 (Mexico City, Saskatchewan, Chicago, Guatamala)" "GMT-7 (Denver, Edmonton, Mountain Time, Phoenix, Salt Lake City)" "GMT-8 (Anchorage, Los Angeles, San Francisco, Seattle)" "GMT-9 (Alaska)" "GMT-10 (Hawaii, Honolulu)" "GMT-11 (Midway Island, Samoa)" "GMT-12 (Eniwetok, Kwaialein)" "UTC" "Universal" --width=500 --height=450) || [ "x$timezone" = "x" ] ; do
- zenity --title="Error" --error --text="Please select a time zone." --timeout=6
-done
-timezone=`echo $timezone | sed 's/(.*)//g'`
-echo $timezone
-echo rm /etc/localtime && ln -s /usr/share/zoneinfo/Etc/$timezone /etc/localtime
-
-#Make sure we clean up any leading zeros in the day (as Zenity freaks out)
-date_d=`date +%d | sed 's/^0//'`
-date_m=`date +%m`
-date_y=`date +%Y`
-
-
-while ! date=$(zenity --calendar --text="Please select the current date" --title "Please select the current date" --day=$date_d --month=$date_m --year=$date_y --date-format="%Y%m%d" --width=500) || [ "x$date" = "x" ] ; do
- zenity --title="Error" --error --text="Please select the date." --timeout 6
-done
-
-echo $date
-
-time_h=`date +%H`
-time_m=`date +%M`
-
-while ! time=$(zenity --title="Enter actual time" --entry --text "Please enter the time in 24hour format (HH:MM):" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
- zenity --title="Error" --error --text="Please input the time." --timeout 6
-done
-
-while ! date -d $time ; do
- time=$(zenity --title="Enter actual time" --entry --text "Please enter the time in 24hour format (HH:MM):" --entry-text "$time_h:$time_m")
-done
-
-date +%Y%m%d -s $date
-date +%H:%M -s $time
+++ /dev/null
-#!/bin/bash
-# Released under the GPL
-# LCD-Settings, v1.0, written by Michael Mrozek aka EvilDragon 2010. Brightness-Settings-Part written by vimacs.
-# This scripts allows you to create, load and save Gamma-Settings and to change the LCD Brightness.
-
-while mainsel=$(zenity --title="LCD-Settings" --width="300" --height="180" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "bright" "Change LCD Brightness" "gamma" "Manage LCD Gamma"); do
-
-case $mainsel in
-
- "bright")
- minbright=3
- maxbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/max_brightness)
- curbright=$(cat /sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness)
- device=/sys/devices/platform/twl4030-pwm0-bl/backlight/twl4030-pwm0-bl/brightness
- if [ ! $1 ]; then
- newbright=$(zenity --scale --text "Set brightness" --min-value=$minbright --max-value=$maxbright --value=$curbright --step 1)
- else
- newbright=$1
- fi
- if [ $newbright ]; then
- if [ $newbright -le $minbright ]; then newbright=$minbright; fi
- if [ $newbright -ge $maxbright ]; then newbright=$maxbright; fi
- echo $newbright > $device
- fi;;
-
- "gamma")
- if selection=$(cat /etc/pandora/conf/gamma.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=700 --height=400 --title="Gamma Manager" --list --column "Name" --column "Description" --text "Please select a Gamma Profile" ); then
- echo $selection
-
- gamma=$(grep "$selection" /etc/pandora/conf/gamma.conf | awk -F\; '{print $3}')
-
- if [ ${gamma} = "syssyscreatenew" ]; then
- cat /sys/devices/platform/omap2_mcspi.1/spi1.1/gamma > /tmp/gamma.current
- op_gammatool
- if zenity --question --title="Confirm new gamma setting" --text="Do you want to keep the current gamma setting or revert to the previous one?" --ok-label="Keep it" --cancel-label="Revert"; then
- if zenity --question --title="Save as profile" --text="Do you want to save the new gamma setting as new profile?\n\nNote: You can also test it out first and save it later by restarting the Gamma Manager" --ok-label="Save it now" --cancel-label="Don't save it now"; then
- while ! name=$(zenity --title="Save current settings" --entry --text "Please enter a Name for the new profile.") || [ "x$name" = "x" ] ; do
- zenity --title="Error" --error --text="Please enter a name for the profile.." --timeout 6
- done
- curr=$(cat /sys/devices/platform/omap2_mcspi.1/spi1.1/gamma)
- desc=$(zenity --title="Save current settings" --entry --text "Please enter a description for the new profile.")
- echo "$name;$desc;$curr" >> /etc/pandora/conf/gamma.conf
- zenity --info --title="Profile created" --text "The current gamma settings have been saved as a new profile." --timeout 6
- fi
- else
- cat /tmp/gamma.current > /sys/devices/platform/omap2_mcspi.1/spi1.1/gamma
- fi
- elif [ ${gamma} = "syssyssavecurrent" ]; then
- curr=$(cat /sys/devices/platform/omap2_mcspi.1/spi1.1/gamma)
- while ! name=$(zenity --title="Save current settings" --entry --text "Please enter a Name for the new profile.") || [ "x$name" = "x" ] ; do
- zenity --title="Error" --error --text="Please enter a name for the profile.." --timeout 6
- done
- desc=$(zenity --title="Save current settings" --entry --text "Please enter a description for the new profile.")
- echo "$name;$desc;$curr" >> /etc/pandora/conf/gamma.conf
- zenity --info --title="Profile created" --text "The current gamma settings have been saved as a new profile." --timeout 6
- elif [ ${gamma} = "syssysdeleteprofile" ]; then
- if selection2=$(cat /etc/pandora/conf/gamma.conf | grep -v syssys | awk -F\; '{print $1 "\n" $2 }' | zenity --width=700 --height=400 --title="Delete gamma profile" --list --column "Name" --column "Description" --text "Please select a Gamma Profile to Delete" ); then
- if zenity --question --title="Confirm Profile Removal" --text="Are you REALLY sure you want to remove the profile $selection2?\n\nThere will be NO other confirmation and this can NOT be undone!" --ok-label="Yes, remove the profile!" --cancel-label="Don't remove the profile"; then
- remove=$(grep "$selection2" /etc/pandora/conf/gamma.conf)
- cat /etc/pandora/conf/gamma.conf | grep -v "$remove" > /tmp/gamma.conf
- mv /tmp/gamma.conf /etc/pandora/conf/gamma.conf
- zenity --info --title="Profile deleted" --text "The profile has been deleted." --timeout 6
- else
- zenity --info --title="Profile not deleted" --text "The profile has not been deleted." --timeout 6
- fi
- fi
- else
- echo $gamma > /sys/devices/platform/omap2_mcspi.1/spi1.1/gamma
- fi
- fi;;
-esac
-done
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# Released under the GPL
-# Nub-Settings, v1.1, written by Michael Mrozek aka EvilDragon 2010
-# This scripts allows you to configure all parameters of the Pandora-Nubs. The left and right nub can both be configured individually.
-
-while mainsel=$(zenity --title="Nub-Configuration" --width="380" --height="200" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "leftnub" "Configure left nub" "rightnub" "Configure right nub" "default" "Restore default settings for both nubs"); do
-
-case $mainsel in
- "leftnub")
-
- while leftsel=$(zenity --title="Configure Left Nub" --width="430" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "nub0mode" "Change Nub mode" "nub0msense" "Change the mouse speed" "nub0ssense" "Change the scroll sensitivity" "nub0rate" "Change the scroll speed" "nub0thres" "Change the mouse button sensitivity" "nub0reset" "Reset Nub"); do
- case $leftsel in
-
- "nub0mode")
- if nubm=$(zenity --height=300 --list --title="Select Nub-mode for the left nub" --text="Please select the mode for the left nub.\n\nNote: This can affect running programs.\nSome programs also may change the nub mode themselves." --column "return" --hide-column=1 --column "Nub Mode" "mouse" "Use the nub as mouse" "mbuttons" "Use the nub for mousebuttons" "scroll" "Use the nub for scrolling" "absolute" "Use the nub as joystick") ; then
-
- echo $nubm > /proc/pandora/nub0/mode
- fi;;
-
- "nub0msense")
- curmsense=$(cat /proc/pandora/nub0/mouse_sensitivity)
- newmsense=$(zenity --scale --text "Set speed for left nub mouse.\nThe default value is 150. Higher value means faster mouse." --min-value=50 --max-value=300 --value=$curmsense --step 1)
- echo $newmsense > /proc/pandora/nub0/mouse_sensitivity
- ;;
-
- "nub0ssense")
- curssense=$(cat /proc/pandora/nub0/scrollx_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the left nub for the X-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub0/scrollx_sensitivity
- curssense=$(cat /proc/pandora/nub0/scrolly_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the left nub for the Y-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub0/scrolly_sensitivity
- ;;
-
- "nub0rate")
- currate=$(cat /proc/pandora/nub0/scroll_rate)
- newrate=$(zenity --scale --text "Set the scroll speed for the left nub.\nThe default value is 20. Higher value means more sensitive." --min-value=1 --max-value=40 --value=$currate --step 1)
- echo $newrate > /proc/pandora/nub0/scroll_rate
- ;;
-
- "nub0thres")
- curthres=$(cat /proc/pandora/nub0/mbutton_threshold)
- newthres=$(zenity --scale --text "Change the mousebutton sensitivity for the left nub.\nThe default value is 20.\nThe higher the value the higher you need to move the nub" --min-value=1 --max-value=40 --value=$curthres --step 1)
- echo $newthres > /proc/pandora/nub0/mbutton_threshold
- ;;
-
- "nub0reset")
- echo 1 > /sys/bus/i2c/drivers/vsense/3-0066/reset
- sleep 1
- echo 0 > /sys/bus/i2c/drivers/vsense/3-0066/reset
- curmode=$(cat /proc/pandora/nub0/mode)
- echo mouse > /proc/pandora/nub0/mode
- while ! zenity --question --title="Resetted left nub" --text="The left nub has been resetted.\nPlease try to move the mouse cursor\nto test if it is working properly." --ok-label="Working properly" --cancel-label="Reset again"; do
- echo 1 > /sys/bus/i2c/drivers/vsense/3-0066/reset
- sleep 1
- echo 0 > /sys/bus/i2c/drivers/vsense/3-0066/reset
- done
- echo $curmode > /proc/pandora/nub0/mode
- ;;
- esac
- done
- ;;
-
- "rightnub")
-
- while rightsel=$(zenity --title="Configure Right Nub" --width="430" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "nub1mode" "Change Nub mode" "nub1msense" "Change the mouse speed" "nub1ssense" "Change the scroll sensitivity" "nub1rate" "Change the scroll speed" "nub1thres" "Change the mouse button sensitivity" "nub1reset" "Reset Nub"); do
- case $rightsel in
-
- "nub1mode")
- if nubm=$(zenity --height=300 --list --title="Select Nub-mode for the right nub" --text="Please select the mode for the right nub.\n\nNote: This can affect running programs.\nSome programs also may change the nub mode themselves." --column "return" --hide-column=1 --column "Nub Mode" "mouse" "Use the nub as mouse" "mbuttons" "Use the nub for mousebuttons" "scroll" "Use the nub for scrolling" "absolute" "Use the nub as joystick") ; then
-
- echo $nubm > /proc/pandora/nub1/mode
- fi;;
-
- "nub1msense")
- curmsense=$(cat /proc/pandora/nub1/mouse_sensitivity)
- newmsense=$(zenity --scale --text "Set speed for right nub mouse.\nThe default value is 150. Higher value means faster mouse." --min-value=50 --max-value=300 --value=$curmsense --step 1)
- echo $newmsense > /proc/pandora/nub1/mouse_sensitivity
- ;;
-
- "nub1ssense")
- curssense=$(cat /proc/pandora/nub1/scrollx_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the right nub for the X-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub1/scrollx_sensitivity
- curssense=$(cat /proc/pandora/nub1/scrolly_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the right nub for the Y-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub1/scrolly_sensitivity
- ;;
-
- "nub1rate")
- currate=$(cat /proc/pandora/nub1/scroll_rate)
- newrate=$(zenity --scale --text "Set the scroll speed for the right nub.\nThe default value is 20. Higher value means more sensitive." --min-value=1 --max-value=40 --value=$currate --step 1)
- echo $newrate > /proc/pandora/nub1/scroll_rate
- ;;
-
- "nub1thres")
- curthres=$(cat /proc/pandora/nub1/mbutton_threshold)
- newthres=$(zenity --scale --text "Change the mousebutton sensitivity for the right nub.\nThe default value is 20.\nThe higher the value the higher you need to move the nub" --min-value=1 --max-value=40 --value=$curthres --step 1)
- echo $newthres > /proc/pandora/nub1/mbutton_threshold
- ;;
-
- "nub1reset")
- echo 1 > /sys/bus/i2c/drivers/vsense/3-0067/reset
- sleep 1
- echo 0 > /sys/bus/i2c/drivers/vsense/3-0067/reset
- curmode=$(cat /proc/pandora/nub1/mode)
- echo mouse > /proc/pandora/nub1/mode
- while ! zenity --question --title="Resetted right nub" --text="The right nub has been resetted.\nPlease try to move the mouse cursor\nto test if it is working properly." --ok-label="Working properly" --cancel-label="Reset again"; do
- echo 1 > /sys/bus/i2c/drivers/vsense/3-0067/reset
- sleep 1
- echo 0 > /sys/bus/i2c/drivers/vsense/3-0067/reset
- done
- echo $curmode > /proc/pandora/nub1/mode
- ;;
- esac
- done
- ;;
-
-"default")
- echo mouse > /proc/pandora/nub0/mode
- echo 150 > /proc/pandora/nub0/mouse_sensitivity
- echo 7 > /proc/pandora/nub0/scrollx_sensitivity
- echo 7 > /proc/pandora/nub0/scrolly_sensitivity
- echo 20 > /proc/pandora/nub0/scroll_rate
- echo 20 > /proc/pandora/nub0/mbutton_threshold
- echo mbuttons > /proc/pandora/nub1/mode
- echo 150 > /proc/pandora/nub1/mouse_sensitivity
- echo 7 > /proc/pandora/nub1/scrollx_sensitivity
- echo 7 > /proc/pandora/nub1/scrolly_sensitivity
- echo 20 > /proc/pandora/nub1/scroll_rate
- echo 20 > /proc/pandora/nub1/mbutton_threshold
- zenity --info --title="Settings restored" --text "The default nub-settings have been restored." --timeout 6
- ;;
-esac
-done
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# Released under the GPL
-# Startup-Manager, v1.0, written by Michael Mrozek aka EvilDragon 2010 with some help by vimacs.
-# This scripts allows you to change various settings of the Pandora startup process.
-
-while mainsel=$(zenity --title="Startup manager" --width="400" --height="250" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "gui" "Change Default GUI for current user" "login" "Enable/Disable auto login" "user" "Select default user" "wifi" "Enable/Disable WiFi on boot"); do
-
-
-case $mainsel in
-
-# Change default GUI
- "gui")
- user2=$(cat /tmp/currentuser)
- selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity ---width=500 --height=300 --title="Change the default GUI" --list --column "Name" --column "Description" --text "Please select the GUI you want to run as default startup" )
-
- echo $selection
-
- gui=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $3}')
-
- if [ $gui ]; then
- sed -i "s/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=$gui/g" /home/$user2/.xinitrc
- zenity --info --title="Changed session" --text "The default session has been changed to $selection." --timeout 6
- fi;;
-
-# Enable / Disable Autologin
- "login")
- if zenity --question --title="Autologin" --text="Do you wish to automatically login at startup?\n\nSecurity warning: This skips the password check on startup" --ok-label="Yes" --cancel-label="No"; then
- sed -i 's/.*auto_login.*/auto_login yes/g' /etc/slim.conf
- zenity --info --title="Changed auto login" --text "Auto login is now enabled." --timeout 6
- else
- sed -i 's/.*auto_login.*/auto_login no/g' /etc/slim.conf
- zenity --info --title="Changed auto login" --text "Auto login is now disabled." --timeout 6
- fi;;
-
-# Select default user
- "user")
- if username=$(cat /etc/passwd | grep /home/ | grep -v root | awk -F\: '{print $1 }' | zenity --width=100 --height=200 --title="Select the default user" --list --column "Username" --text "Please select the default user\nor press Cancel to disable a default user.") ; then
- sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
- zenity --info --title="Changed default user" --text "The default user is now $username." --timeout 6
- else
- echo
- sed -i "s/.*default_user.*/default_user/g" /etc/slim.conf
- zenity --info --title="Changed default user" --text "The default user disabled" --timeout 6
- fi;;
-
-# Enable / Disable WiFi on boot
- "wifi")
- if zenity --question --title="Start WiFi on Bootup" --text="Do you wish to automatically start the WiFi driver on bootup?" --ok-label="Yes" --cancel-label="No"; then
- ln -s ../init.d/wl1251-init /etc/rc5.d/S30wl1251-init
- ln -s ../init.d/wl1251-init /etc/rc2.d/S30wl1251-init
- zenity --info --title="Changed WiFi startup" --text "WiFi on boot is now enabled." --timeout 6
- else
- rm /etc/rc2.d/S30wl1251-init
- rm /etc/rc5.d/S30wl1251-init
- zenity --info --title="Changed WiFi startup" --text "WiFi on boot is now disabled." --timeout 6
- fi;;
-esac
-done
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-
-selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=300 --title="Switch to a different GUI" --list --column "name" --column "description" --text "Select a GUI you want to switch to" )
-echo $selection
-
-gui=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $3}')
-stopnew=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $4}')
-
-echo $gui
-
-if [ $gui ]; then
- echo "$gui" > /tmp/gui.load
- echo "$stopnew" > /tmp/gui.stopnew
- echo $selection will be started
- /tmp/gui.stop
-else
- exit 0
-fi
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# Released under the GPL
-# User-Manager, v1.0, written by Michael Mrozek aka EvilDragon 2010.
-# Partly based on the scripts by JohnX/Mer Project - http://wiki.maemo.org/Mer/
-# Reworked for the OpenPandora - John Willis/Michael Mrozek
-# This scripts allows you to create and remove users from the Pandora system.
-
-while selection=$(zenity --title="Usermanager" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "add" "Add a user" "remove" "Remove a user" ); do
- if [ ${selection} = "add" ]; then
- echo "Add user"
- if name=$(zenity --title="Enter full name" --entry --text "Please enter a full name for the new user.") ; then
- username_guess=$(echo "$name" | cut -d" " -f1 | tr A-Z a-z)
-
- if username=$(zenity --title="Enter the new username" --entry --text "Please choose a short username.\n\nIt should be all lowercase and contain only letters and numbers." --entry-text "$username_guess") || [ "x$username" = "x" ] ; then
-
- while ! useradd -c "$name,,," -G adm,audio,video,wheel,netdev,plugdev,users "$username" ; do
- username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
- done
-
- password=""
- while [ x$password = x ] ; do
- password1=$(zenity --title=Password --entry --text="Please choose a new password." --hide-text)
- password2=$(zenity --title=Confirm --entry --text="Confirm your new password." --hide-text)
- if [ $password1 != $password2 ] ; then
- zenity --title="Error" --error --text="The passwords do not match.\n\nPlease try again." --timeout 6
- else
- if [ x$password1 = x ] ; then
- zenity --title="Error" --error --text="Password cannot be blank!\n\nPlease try again." --timeout 6
- else
- password=$password1
- fi
- fi
- done
-
-passwd "$username" <<EOF
-$password
-$password
-EOF
- if zenity --question --title="User created" --text="The user $username has been successfully created.\n\nDo you want to set this user as default user for the login?" --ok-label="Yes, please!" --cancel-label="No, keep the old user as default"; then
- sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
- fi
- zenity --info --title="User created" --text "Thanks. The new user can now be used." --timeout 6
- fi
- fi
- elif [ ${selection} = "remove" ]; then
- user2=$(cat /tmp/currentuser)
- echo "Remove User"
- amount=$(cat /etc/passwd | grep /home/ | grep -v root | awk -F\: '{print $1 }' | wc -l)
- if [ ${amount} = "1" ]; then
- zenity --title="Error" --error --text="Sorry! You can't remove the last normal user!" --timeout 6
- else
- if selection=$(cat /etc/passwd | grep /home/ | grep -v root | grep -v $user2 | awk -F\: '{print $1 }' | zenity --width=100 --height=200 --title="Select the user to delete" --list --column "Username" --text "Select the user to delete\n\nPlease note: You can't remove the user that is currently logged in.") ; then
- if zenity --question --title="Confirm User Removal" --text="Are you REALLY sure you want to remove the user $selection?\n\nThere will be NO other confirmation and this can NOT be undone!" --ok-label="Yes, remove user!" --cancel-label="Don't remove the user"; then
- echo "Really remove $selection"
- userdel -fr $selection
- sed -i "s/.*default_user $selection/default_user/g" /etc/slim.conf
- zenity --info --title="User removed" --text "The user $selection has been removed." --timeout 6
- else
- echo "Don't remove $selection"
- zenity --info --title="User not removed" --text "Cancelled removal of user $selection at user's request." --timeout 6
- fi
- fi
- fi
- fi
-done
-
-
-
+++ /dev/null
-#!/bin/sh
-DESC="WL1251 MAC80211 Wireless LAN driver"
-NAME="wl1251"
-
-d_stop() {
- if `grep -q wl1251 /proc/modules` ; then
- rmmod wl1251_sdio
- rmmod wl1251
- rmmod board-omap3pandora-wifi
- fi
-}
-
-d_start() {
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "rfkill_backport.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "compat.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "cfg80211.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "mac80211.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "compat_firmware_class.ko")
- insmod $(busybox find /lib/modules/$(uname -r) -name "ecb.ko")
- insmod $(busybox find /lib/modules/$(uname -r) -name "pcbc.ko")
- insmod $(busybox find /lib/modules/$(uname -r) -name "arc4.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "lib80211.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "lib80211_crypt_tkip.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "lib80211_crypt_wep.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "lib80211_crypt_ccmp.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "wl1251.ko")
- insmod $(busybox find /lib/modules/$(uname -r)/updates -name "wl1251_sdio.ko")
- insmod $(busybox find /lib/modules/$(uname -r) -name "board-omap3pandora-wifi.ko")
-
- # restore phyX related LED triggers (they come from mac80211.ko)
- sleep 0.5
- if [ -e /sys/class/leds/ ] ; then
- for led in /sys/class/leds/* ; do
- trigger=$(grep "$(basename $led)" /etc/default/leds | grep "phy" | awk '{print $2}')
- if [ "x$trigger" != "x" ] ; then
- echo "$trigger" > "$led/trigger"
- fi
- done
- fi
-}
-
-case "$1" in
- start)
- echo -n "Starting $DESC: $NAME"
- d_start &
- echo "."
- ;;
- stop)
- echo -n "Stopping $DESC: $NAME"
- d_stop
- echo "."
- ;;
- restart|force-reload)
- echo -n "Restarting $DESC: $NAME"
- d_stop
- sleep 1
- d_start
- echo "."
- ;;
- *)
- echo "Usage: $0 {start|stop|restart|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
-#!/bin/sh
-killall xfwm4
-killall mmwrapper
\ No newline at end of file
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<PXML xmlns="http://openpandora.org/namespaces/PXML" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="PXML_schema.xsd">
-
- <application id="updater.openpandora.org">
-
- <title lang="en_US">Pandora Hotfix Kit 1</title>
-
- <exec command="./start.sh"/>
- <icon src="updater.png"/>
-
- <description lang="en_US">Hotfix for your Pandora.</description>
-
- <author name="OpenPandora Team" website="http://www.openpandora.org"/>
-
- <categories>
- <category name="System">
- </category>
- </categories>
-
- </application>
-
-</PXML>
+++ /dev/null
-#!/bin/bash
-gksudo ./updater1.sh
\ No newline at end of file
+++ /dev/null
-#### THIS SCRIPT IS NOT FINISHED YET! ####
-
-#!/bin/bash
-newkern=b00a5d617f11366689488395b19411de
-oldkern=3112d1782a90c2c87ae17a152a35deae
-currkern=$(md5sum /boot/uImage | cut -d" " -f1)
-needfree=$(ls -lk uImage | grep uImage | cut -d" " -f5)
-oldinterfaces=23f72750f2f7335b9c2ed3f55aaa5061
-oldrcwl1251=7a6361e842f0f589418218436affbe07
-newmmenu=af66a5118a9bfef8eca5de13ee64c6a1
-oldmmenu1=
-oldmmenu2=fa45e9bc91c48640a9ea592de5fbeb3c
-oldmmenuconf1=
-oldmmenuconf2=c90d33c362121ddd0e24e9eac0b82da9
-newmmenuconf=d3b237cf95ff6c6e81b23483e87391e1
-currmmenu=$(md5sum /usr/bin/mmenu | cut -d" " -f1)
-currmmenuconf=$(md5sum /etc/pandora/conf/mmenu.conf | cut -d" " -f1)
-err="Your system has been updated without any errors."
-
-rm /tmp/updater.log
-rm /tmp/updatedetail.log
-
-if zenity --question --title="Update Package 2" --text="This PND updates your Pandora OS. You can safely delete it after it has finished.\nThis pack includes all updates from Hotfix 1 as well.\n\nDo you want to start the upgrade now? " --ok-label="Start now" --cancel-label="Don't do it" ; then
-
-(
-echo "10"
-echo "# Updating kernel if needed"
-
-# HotFix 1
-# Kernel Update
-
- if [ $oldkern = $currkern ]; then
- rm /boot/uImage.old >> /tmp/updatedetail.log
- currfree=$(df /boot | grep boot | awk '{print $4}')
- if [ $currfree -lt $needfree ]; then
- err="There is not enough diskspace on /boot/ to update the kernel.\n\nKernel couldn't be updated."
- echo "Kernel not updated - not enough diskspace on /boot/" >> /tmp/updater.log
- else
- cp 1/uImage /boot/uImage.new >> /tmp/updatedetail.log
- sync
- currkern=$(md5sum /boot/uImage.new | cut -d" " -f1)
- if [ $currkern = $newkern ]; then
- mv /boot/uImage /boot/uImage.old >> /tmp/updatedetail.log
- mv /boot/uImage.new /boot/uImage >> /tmp/updatedetail.log
- currkern=$(md5sum /boot/uImage | cut -d" " -f1)
- if [ $currkern != $newkern ]; then
- rm /boot/uImage >> /tmp/updatedetail.log
- mv /boot/uImage.old /boot/uImage >> /tmp/updatedetail.log
- err="There was a checksum error while copying the kernel.\n\nKernel couldn't be updated. Please check your SD-Card and try to recopy the PND-File."
- echo "Kernel not updated - checksum error" >> /tmp/updater.log
- fi
- else
- rm /boot/uImage.new >> /tmp/updatedetail.log
- err="There was a checksum error while copying the kernel.\n\nKernel couldn't be updated. Please check your SD-Card and try to recopy the PND-File."
- echo "Kernel not updated - checksum error" >> /tmp/updater.log
- fi
- fi
- fi
- echo "Kernel successfully updated" >> /tmp/updater.log
- sync
-
-# Libraries for HotFix 1
-
-echo "20"
-echo "# Installing missing Python libraries"
-if [ "`opkg list-installed | grep python-shell`" ]; then
- echo "Python libraries were already installed." >> /tmp/updater.log
-else
- opkg install 1/gnome-vfs-plugin-ftp_2.24.1-r2.5_armv7a.ipk 1/gnome-vfs-plugin-http_2.24.1-r2.5_armv7a.ipk 1/python-pycairo_1.4.0-ml3.5_armv7a.ipk 1/python-pygtk_2.16.0-r1.5_armv7a.ipk 1/python-shell_2.6.4-ml9.1.5_armv7a.ipk >> /tmp/updatedetail.log
- echo "Python libraries installed" >> /tmp/updater.log
- sync
-fi
-
-# HotFix 2
-# MiniMenu Update
-
-echo "30"
-echo "# Installing updated MiniMenu"
- if [ $oldmmenu1 = $currmmenu -o $oldmmenu2 = $currmenu]; then
- rm /usr/bin/mmenu.old >> /tmp/updatedetail.log
- cp 2/mmenu /usr/bin/mmenu.new >> /tmp/updatedetail.log
- cp 2/mmenu.conf /etc/pandora/conf/mmenu.conf.new >> /tmp/updatedetail.log
- sync
- currmmenu=$(md5sum /usr/bin/mmenu.new | cut -d" " -f1)
- if [ $currmmenu = $newmmenu ]; then
- mv /usr/bin/mmenu /usr/bin/mmenu.old >> /tmp/updatedetail.log
- mv /etc/pandora/conf/mmenu.conf /etc/pandora/conf/mmenu.conf.old >> /tmp/updatedetail.log
- mv /usr/bin/mmenu.new /usr/bin/mmenu >> /tmp/updatedetail.log
- mv /etc/pandora/conf/mmenu.conf.new /etc/pandora/conf/mmenu.conf >> /tmp/updatedetail.log
- currmmenu=$(md5sum /boot/uImage | cut -d" " -f1)
- if [ $currmmenu != $newmmenu ]; then
- rm /usr/bin/mmenu >> /tmp/updatedetail.log
- rm /etc/pandora/conf/mmenu.conf >> /tmp/updatedetail.log
- mv /etc/pandora/conf/mmenu.conf.old /etc/pandora/conf/mmenu.conf >> /tmp/updatedetail.log
- mv /usr/bin/mmenu.old /usr/bin/mmenu >> /tmp/updatedetail.log
- err="There was a checksum error while copying MiniMenu.\n\nMiniMenu couldn't be updated. Please check your SD-Card and try to recopy the PND-File."
- echo "MiniMenu not updated - checksum error" >> /tmp/updater.log
- fi
- else
- rm /usr/bin/mmenu.new >> /tmp/updatedetail.log
- rm /etc/pandora/conf/mmenu.conf.new >> /tmp/updatedetail.log
- err="There was a checksum error while copying MiniMenu.\n\nMiniMenu couldn't be updated. Please check your SD-Card and try to recopy the PND-File."
- echo "MiniMenu not updated - checksum error" >> /tmp/updater.log
- fi
- fi
- fi
- echo "MiniMenu successfully updated" >> /tmp/updater.log
- sync
-
-# Libraries for HotFix 2
-
-echo "40"
-echo "# Installing Boost Library"
-if [ "`opkg list-installed | grep boost-system`" ]; then
- echo "Boost library was already installed" >> /tmp/updater.log
-else
- opkg install 2/boost_1.41.0-r8.1.5_armv7a.ipk 2/boost-filesystem_1.41.0-r8.1.5_armv7a.ipk 2/boost-graph_1.41.0-r8.1.5_armv7a.ipk 2/boost-iostreams_1.41.0-r8.1.5_armv7a.ipk 2/boost-program-options_1.41.0-r8.1.5_armv7a.ipk 2/boost-python_1.41.0-r8.1.5_armv7a.ipk 2/boost-regex_1.41.0-r8.1.5_armv7a.ipk 2/boost-serialization_1.41.0-r8.1.5_armv7a.ipk 2/boost-signals_1.41.0-r8.1.5_armv7a.ipk 2/boost-system_1.41.0-r8.1.5_armv7a.ipk 2/boost-test_1.41.0-r8.1.5_armv7a.ipk >> /tmp/updatedetail.log
- echo "Boost library installed" >> /tmp/updater.log
- sync
-fi
-
-# Bugfixes in Scripts
-
-echo "50"
-echo "# Installing updated scripts"
-if [ ! -f /usr/bin/stopmmenu ]; then
- cp 2/op_bluetooth.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_calibrate.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_datetime.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_lcdsettings.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_nubmode.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_startupmanager.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_switchgui.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/op_usermanager.sh /usr/pandora/scripts/ >> /tmp/updatedetail.log
- cp 2/gui.conf /etc/pandora/conf/ >> /tmp/updatedetail.log
- cp 2/op_bluetooth.desktop /usr/share/applications/ >> /tmp/updatedetail.log
- cp 2/rc.wl1251 /etc/init.d/wl1251-init >> /tmp/updatedetail.log
- cp 2/interfaces /etc/network/ >> /tmp/updatedetail.log
- cp 2/stopmmenu /usr/bin/stopmmenu >> /tmp/updatedetail.log
- echo "The scripts have been updated" >> /tmp/updater.log
- sync
-else
- echo "The scripts were up-to-date" >> /tmp/updater.log
-fi
-
-
-# Zenity Progress goes here
-fi
-
-
-
-
-
-
-
git.openpandora.org / openpandora.oe.git / commitdiff
