arm/mxc: do not use gpio_to_irq() for static initializers

The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and replaces
all the uses of gpio_to_irq() in static initializers with
IMX_GPIO_TO_IRQ().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index f39a478..13b7041 100644 (file)
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -66,7 +66,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
                I2C_BOARD_INFO("tsc2007", 0x48),
                .type           = "tsc2007",
                .platform_data  = &tsc2007_info,
-               .irq            = gpio_to_irq(TSC2007_IRQGPIO),
+               .irq            = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
        },
 };
 

diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6fa6934..097ff42 100644 (file)
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -359,7 +359,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
                .bus_num        = 1,
                .chip_select    = 0, /* SS0 */
                .platform_data  = &mc13783_pdata,
-               .irq = gpio_to_irq(PMIC_INT),
+               .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
                .mode = SPI_CS_HIGH,
        }, {
                .modalias       = "l4f00242t03",

diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 7d8e012..5250283 100644 (file)
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
        }, {
                I2C_BOARD_INFO("mc13892", 0x08),
                .platform_data = &vpr200_pmic,
-               .irq = gpio_to_irq(GPIO_PMIC_INT),
+               .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
        }
 };
 

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 68934ea..49ec98e 100644 (file)
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -57,7 +57,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
        {
                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-               .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+               .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
                .irqflags = IRQF_TRIGGER_HIGH,
                .uartclk = CPUIMX51_QUART_XTAL,
                .regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +65,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
        }, {
                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-               .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+               .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
                .irqflags = IRQF_TRIGGER_HIGH,
                .uartclk = CPUIMX51_QUART_XTAL,
                .regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
        }, {
                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-               .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+               .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
                .irqflags = IRQF_TRIGGER_HIGH,
                .uartclk = CPUIMX51_QUART_XTAL,
                .regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
        }, {
                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-               .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+               .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
                .irqflags = IRQF_TRIGGER_HIGH,
                .uartclk = CPUIMX51_QUART_XTAL,
                .regshift = CPUIMX51_QUART_REGSHIFT,

diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d5..8badbdb 100644 (file)
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -129,7 +129,7 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
                I2C_BOARD_INFO("tsc2007", 0x49),
                .type           = "tsc2007",
                .platform_data  = &tsc2007_info,
-               .irq            = gpio_to_irq(TSC2007_IRQGPIO),
+               .irq            = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
        },
 };
 
@@ -245,7 +245,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
                .mode           = SPI_MODE_0,
                .chip_select     = 0,
                .platform_data   = &mcp251x_info,
-               .irq             = gpio_to_irq(CAN_IRQGPIO)
+               .irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
        },
 };
 

diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..ddc3015 100644 (file)
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -134,8 +134,8 @@ static struct resource ard_smsc911x_resources[] = {
                .flags = IORESOURCE_MEM,
        },
        {
-               .start =  gpio_to_irq(ARD_ETHERNET_INT_B),
-               .end =  gpio_to_irq(ARD_ETHERNET_INT_B),
+               .start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+               .end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
                .flags = IORESOURCE_IRQ,
        },
 };

diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index bbf4564..ab0b1b2 100644 (file)
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -160,7 +160,7 @@ struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
        {
                I2C_BOARD_INFO("tsc2007", 0x49),
-               .irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+               .irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
                .platform_data = &tsc2007_data,
        }, {
                I2C_BOARD_INFO("tlv320aic23", 0x1a),

diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index c920945..4d79b5e 100644 (file)
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -589,7 +589,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
                .bus_num = 0,
                .chip_select = 0,
                .platform_data = &mx51_efika_mc13892_data,
-               .irq = gpio_to_irq(EFIKAMX_PMIC),
+               .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
        },
 };
 

diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a8bfd56..77f6556 100644 (file)
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -116,4 +116,6 @@
        .type = _type,                                                  \
 }
 
+#define IMX_GPIO_TO_IRQ(gpio)  (MXC_GPIO_IRQ_START + (gpio))
+
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */