staging: brcm80211: got rid of WL_FFPLD message log macro
authorRoland Vossen <rvossen@broadcom.com>
Tue, 3 May 2011 09:36:00 +0000 (11:36 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 3 May 2011 19:42:48 +0000 (12:42 -0700)
Code cleanup. Partially removed, remaining replaced with BCMMSG.

Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/brcm80211/brcmsmac/wl_dbg.h
drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
drivers/staging/brcm80211/include/wlioctl.h

index 8beeefe..5582de3 100644 (file)
 /* wl_msg_level is a bit vector with defs in wlioctl.h */
 extern u32 wl_msg_level;
 
-#define WL_PRINT(level, fmt, args...)          \
-do {                                           \
-       if (wl_msg_level & level)               \
-               printk(fmt, ##args);            \
-} while (0)
-
 #define BCMMSG(dev, fmt, args...)              \
 do {                                           \
        if (wl_msg_level & WL_TRACE_VAL)        \
@@ -36,7 +30,6 @@ do {                                          \
 
 #ifdef BCMDBG
 
-#define WL_FFPLD(fmt, args...) WL_PRINT(WL_FFPLD_VAL, fmt, ##args)
 
 /* Extra message control for AMPDU debugging */
 #define   WL_AMPDU_UPDN_VAL    0x00000001      /* Config up/down related  */
@@ -79,7 +72,6 @@ do {                                          \
 
 #else                          /* BCMDBG */
 
-#define WL_FFPLD(fmt, args...)         no_printk(fmt, ##args)
 
 #define WL_AMPDU_UPDN(fmt, args...)    no_printk(fmt, ##args)
 #define WL_AMPDU_RX(fmt, args...)      no_printk(fmt, ##args)
index dbdbe85..876e523 100644 (file)
@@ -314,7 +314,7 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
                         M_UCODE_MACSTAT + offsetof(macstat_t, txfunfl[fid]));
        new_txunfl = (u16) (cur_txunfl - fifo->prev_txfunfl);
        if (new_txunfl == 0) {
-               WL_FFPLD("check_txunfl : TX status FRAG set but no tx underflows\n");
+               BCMMSG(wlc->wiphy, "TX status FRAG set but no tx underflows\n");
                return -1;
        }
        fifo->prev_txfunfl = cur_txunfl;
@@ -324,7 +324,6 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
 
        /* check if fifo is big enough */
        if (wlc_xmtfifo_sz_get(wlc, fid, &xmtfifo_sz)) {
-               WL_FFPLD("check_txunfl : get xmtfifo_sz failed\n");
                return -1;
        }
 
@@ -338,8 +337,8 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
        if (fifo->accum_txfunfl < 10)
                return 0;
 
-       WL_FFPLD("ampdu_count %d  tx_underflows %d\n",
-                current_ampdu_cnt, fifo->accum_txfunfl);
+       BCMMSG(wlc->wiphy, "ampdu_count %d  tx_underflows %d\n",
+               current_ampdu_cnt, fifo->accum_txfunfl);
 
        /*
           compute the current ratio of tx unfl per ampdu.
@@ -366,7 +365,6 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
         */
 
        if (fifo->ampdu_pld_size >= max_mpdu * FFPLD_MPDU_SIZE) {
-               WL_FFPLD(("tx fifo pld : max ampdu fits in fifo\n)"));
                fifo->accum_txfunfl = 0;
                return 0;
        }
@@ -392,8 +390,9 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
                      (max_mpdu * FFPLD_MPDU_SIZE - fifo->ampdu_pld_size))
                     / (max_mpdu * FFPLD_MPDU_SIZE)) * 100;
 
-               WL_FFPLD("DMA estimated transfer rate %d; pre-load size %d\n",
-                        fifo->dmaxferrate, fifo->ampdu_pld_size);
+               BCMMSG(wlc->wiphy, "DMA estimated transfer rate %d; "
+                       "pre-load size %d\n",
+                       fifo->dmaxferrate, fifo->ampdu_pld_size);
        } else {
 
                /* decrease ampdu size */
index 5e2b11b..1e11c42 100644 (file)
@@ -1247,8 +1247,6 @@ typedef struct tx_inst_power {
 /* Message levels */
 #define WL_ERROR_VAL           0x00000001
 #define WL_TRACE_VAL           0x00000002
-#define WL_AMPDU_VAL           0x20000000
-#define WL_FFPLD_VAL           0x40000000
 
 /* maximum channels returned by the get valid channels iovar */
 #define WL_NUMCHANNELS         64