* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: issue DIPM enable commands with LPM state updated
libata: no special completion processing for EH commands
pata_mpc52xx: driver needs BMDMA
pata_cs5536: Add support for non-X86_32 platforms
libata-sff: fix HSM_ST_ERR handling in __ata_sff_port_intr()
If unsure, say N.
-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select PPC_BESTCOMM_ATA
- help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
-
- If unsure, say N.
-
config PATA_OCTEON_CF
tristate "OCTEON Boot Bus Compact Flash support"
depends on CPU_CAVIUM_OCTEON
config PATA_CS5536
tristate "CS5536 PATA support"
- depends on PCI && X86 && !X86_64
+ depends on PCI
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
If unsure, say N.
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select PPC_BESTCOMM_ATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
depends on PCI
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
obj-$(CONFIG_SATA_SX4) += sata_sx4.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
obj-$(CONFIG_PATA_MACIO) += pata_macio.o
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
+obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
{
struct ata_device *dev = qc->dev;
- if (ata_tag_internal(qc->tag))
- return;
-
if (ata_is_nodata(qc->tf.protocol))
return;
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
- if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- /* always fill result TF for failed qc */
+ /*
+ * Finish internal commands without any further processing
+ * and always with the result TF filled.
+ */
+ if (unlikely(ata_tag_internal(qc->tag))) {
fill_result_tf(qc);
+ __ata_qc_complete(qc);
+ return;
+ }
- if (!ata_tag_internal(qc->tag))
- ata_qc_schedule_eh(qc);
- else
- __ata_qc_complete(qc);
+ /*
+ * Non-internal qc has failed. Fill the result TF and
+ * summon EH.
+ */
+ if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
+ fill_result_tf(qc);
+ ata_qc_schedule_eh(qc);
return;
}
struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+ enum ata_lpm_policy old_policy = link->lpm_policy;
unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
unsigned int err_mask;
int rc;
goto fail;
}
+ /*
+ * Low level driver acked the transition. Issue DIPM command
+ * with the new policy set.
+ */
+ link->lpm_policy = policy;
+ if (ap && ap->slave_link)
+ ap->slave_link->lpm_policy = policy;
+
/* host config updated, enable DIPM if transitioning to MIN_POWER */
ata_for_each_dev(dev, link, ENABLED) {
if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
}
}
- link->lpm_policy = policy;
- if (ap && ap->slave_link)
- ap->slave_link->lpm_policy = policy;
return 0;
fail:
+ /* restore the old policy */
+ link->lpm_policy = old_policy;
+ if (ap && ap->slave_link)
+ ap->slave_link->lpm_policy = old_policy;
+
/* if no device or only one more chance is left, disable LPM */
if (!dev || ehc->tries[dev->devno] <= 2) {
ata_link_printk(link, KERN_WARNING,
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
return ata_sff_idle_irq(ap);
break;
- case HSM_ST:
- case HSM_ST_LAST:
- break;
- default:
+ case HSM_ST_IDLE:
return ata_sff_idle_irq(ap);
+ default:
+ break;
}
/* check main status, clearing INTRQ if needed */
#include <linux/delay.h>
#include <linux/libata.h>
#include <scsi/scsi_host.h>
+
+#ifdef CONFIG_X86_32
#include <asm/msr.h>
+static int use_msr;
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+#else
+#define rdmsr(x, y, z) do { } while (0)
+#define wrmsr(x, y, z) do { } while (0)
+#define use_msr 0
+#endif
#define DRV_NAME "pata_cs5536"
-#define DRV_VERSION "0.0.7"
+#define DRV_VERSION "0.0.8"
enum {
CFG = 0,
IDE_ETC_NODMA = 0x03,
};
-static int use_msr;
-
static const u32 msr_reg[4] = {
MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
};
static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
{
if (unlikely(use_msr)) {
- u32 dummy;
+ u32 dummy __maybe_unused;
rdmsr(msr_reg[reg], *val, dummy);
return 0;
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cs5536);
MODULE_VERSION(DRV_VERSION);
-module_param_named(msr, use_msr, int, 0644);
-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
module_init(cs5536_init);
module_exit(cs5536_exit);