linux 2.6.20, 2.6.21, 2.6.21+2.6.21+2.6.22-rc1: at91sam9263-ek updates

diff --git a/packages/linux/linux-2.6.21+2.6.22-rc1/.mtn2git_empty b/packages/linux/linux-2.6.21+2.6.22-rc1/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-2.6.21+2.6.22-rc1/at91-mmcfix.patch b/packages/linux/linux-2.6.21+2.6.22-rc1/at91-mmcfix.patch
new file mode 100644 (file)
index 0000000..0b503b9
--- /dev/null
+++ b/packages/linux/linux-2.6.21+2.6.22-rc1/at91-mmcfix.patch
@@ -0,0 +1,35 @@
+From: Marc Pignat <marc.pignat@hevs.ch>
+Date: Wed, 6 Jun 2007 18:27:59 +0000 (+0200)
+Subject: mmc-atmel: remove linux/mmc/protocol.h dependencies
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=b6cedb38613d41367839df9d2181df3c81fb25c4
+
+mmc-atmel: remove linux/mmc/protocol.h dependencies
+
+Fix compilation error by removing command decoding from at91_mci.c driver.
+Decoding commands in the host driver is the wrong way.
+
+Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
+Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
+---
+
+--- /tmp/at91_mci.c    2007-06-13 11:17:32.809501930 +0200
++++ linux-2.6.21/drivers/mmc/host/at91_mci.c   2007-06-13 11:19:36.953487036 +0200
+@@ -417,7 +417,7 @@
+               blocks = 0;
+       }
+ 
+-      if (cmd->opcode == MMC_STOP_TRANSMISSION)
++      if (host->flags & FL_SENT_STOP)
+               cmdr |= AT91_MCI_TRCMD_STOP;
+ 
+       if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
+@@ -561,8 +561,7 @@
+                status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ 
+       if (status & AT91_MCI_ERRORS) {
+-              if ((status & AT91_MCI_RCRCE) &&
+-                      ((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
++              if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
+                       cmd->error = MMC_ERR_NONE;
+               }
+               else {

diff --git a/packages/linux/linux_2.6.20.bb b/packages/linux/linux_2.6.20.bb
index 80f6c71..91388a2 100644 (file)
--- a/packages/linux/linux_2.6.20.bb
+++ b/packages/linux/linux_2.6.20.bb
@@ -1,7 +1,11 @@
 DESCRIPTION = "Linux Kernel"
 SECTION = "kernel"
 LICENSE = "GPL"
-PR = "r6"
+
+# These devices need mkimage to generate a kernel image
+DEPENDS_at91sam9263ek = "u-boot-mkimage-gta01-native"
+
+PR = "r7"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
            file://defconfig"
@@ -11,13 +15,32 @@ SRC_URI_append_n2100 = "\
           file://rtc-rs5c372-n2100.patch;patch=1 \
           "
 
+SRC_URI_append_at91sam9263ek = " \
+                                 http://maxim.org.za/AT91RM9200/2.6/${PV}-at91.patch.gz;patch=1 \
+                                 http://www.at91.com/repFichier/Project-217/linux-${PV}-at91-exp.diff.bz2;patch=1 \
+                               "
+
 inherit kernel
 
+
 KERNEL_IMAGETYPE = "bzImage"
 KERNEL_IMAGETYPE_n2100 = "zImage"
+KERNEL_IMAGETYPE_at91sam9263ek = "uImage"
 
 do_configure_prepend() {
-       install -m 0644 ${WORKDIR}/defconfig ${S}/.config
+        if [ "${TARGET_OS}" == "linux-gnueabi" -o  "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then
+                echo "CONFIG_AEABI=y"                   >> ${S}/.config
+                echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+        else
+                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+        fi
+
+        sed -e '/CONFIG_AEABI/d' \
+            -e '/CONFIG_OABI_COMPAT=/d' \
+            '${WORKDIR}/defconfig' >>'${S}/.config'
+
+        yes '' | oe_runmake oldconfig
 }
 
 do_install_append_n2100() {

diff --git a/packages/linux/linux_2.6.21+2.6.22-rc1.bb b/packages/linux/linux_2.6.21+2.6.22-rc1.bb
new file mode 100644 (file)
index 0000000..2773280
--- /dev/null
+++ b/packages/linux/linux_2.6.21+2.6.22-rc1.bb
@@ -0,0 +1,61 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPL"
+
+DEFAULT_PREFERENCE = "-1"
+
+
+# These devices need mkimage to generate a kernel image 
+DEPENDS_kb9202 = "u-boot-mkimage-gta01-native"
+DEPENDS_at32stk1000 = "u-boot-mkimage-gta01-native" 
+DEPENDS_atngw100 = "u-boot-mkimage-gta01-native"
+DEPENDS_at91sam9263ek = "u-boot-mkimage-gta01-native"
+
+DEFAULT_PREFERENCE_at91sam9263ek = "-1"
+
+PR = "r0"
+
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.21.tar.bz2 \
+           ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/patch-2.6.22-rc1.bz2;patch=1 \
+           file://defconfig \
+          "
+
+SRC_URI_append_simpad = "\
+           file://linux-2.6.21-SIMpad-cs3-simpad.patch;patch=1 \
+           file://linux-2.6.21-SIMpad-mq200.patch;patch=1 \
+           file://linux-2.6.21-SIMpad-serial-and-gpio_keys.patch;patch=1 \
+           file://linux-2.6.21-SIMpad-ucb1x00-switches.patch;patch=1 \
+           file://linux-2.6.21-pcmcia-device-to-platform-driver.patch;patch=1 \
+           "
+SRC_URI_append_kb9202 = " http://maxim.org.za/AT91RM9200/2.6/2.6.22-rc1-at91.patch.gz;patch=1 \
+                          file://at91-mmcfix.patch;patch=1"
+SRC_URI_append_at91sam9263ek = " http://maxim.org.za/AT91RM9200/2.6/2.6.22-rc1-at91.patch.gz;patch=1 \
+                                 file://at91-mmcfix.patch;patch=1"
+
+S = "${WORKDIR}/linux-2.6.21"
+
+inherit kernel
+
+KERNEL_IMAGETYPE_progear = "bzImage"
+KERNEL_IMAGETYPE_simpad = "zImage"
+KERNEL_IMAGETYPE_kb9202 = "uImage"
+KERNEL_IMAGETYPE_atngw100 = "uImage"
+KERNEL_IMAGETYPE_at32stk1000 = "uImage"
+KERNEL_IMAGETYPE_at91sam9263ek = "uImage"
+
+do_configure_prepend() {
+        if [ "${TARGET_OS}" == "linux-gnueabi" -o  "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then
+                echo "CONFIG_AEABI=y"                   >> ${S}/.config
+                echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+        else
+                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+        fi
+
+        sed -e '/CONFIG_AEABI/d' \
+            -e '/CONFIG_OABI_COMPAT=/d' \
+            '${WORKDIR}/defconfig' >>'${S}/.config'
+
+        yes '' | oe_runmake oldconfig
+}
+

diff --git a/packages/linux/linux_2.6.21.bb b/packages/linux/linux_2.6.21.bb
index 94ec060..d823b4d 100644 (file)
--- a/packages/linux/linux_2.6.21.bb
+++ b/packages/linux/linux_2.6.21.bb
@@ -8,6 +8,8 @@ DEPENDS_at32stk1000 = "u-boot-mkimage-gta01-native"
 DEPENDS_atngw100 = "u-boot-mkimage-gta01-native"
 DEPENDS_at91sam9263ek = "u-boot-mkimage-gta01-native"
 
+DEFAULT_PREFERENCE_at91sam9263ek = "-1"
+
 PR = "r3"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \