ipg: remove some internal comments

This removes some now useless comments that were added when the driver was
developed out-of-tree.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Cc: Jesse Huang <jesse@icplus.com.tw>

diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 9e228e7..6b64bc5 100644 (file)
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -373,7 +373,6 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
        }
 }
 
-/* Set LED_Mode JES20040127EEPROM */
 static void ipg_set_led_mode(struct net_device *dev)
 {
        struct ipg_nic_private *sp = netdev_priv(dev);
@@ -395,7 +394,6 @@ static void ipg_set_led_mode(struct net_device *dev)
        ipg_w32(mode, ASIC_CTRL);
 }
 
-/* Set PHYSet JES20040127EEPROM */
 static void ipg_set_phy_set(struct net_device *dev)
 {
        struct ipg_nic_private *sp = netdev_priv(dev);
@@ -414,7 +412,7 @@ static int ipg_reset(struct net_device *dev, u32 resetflags)
         * register as specified by the 'resetflags' input
         * parameter.
         */
-       void __iomem *ioaddr = ipg_ioaddr(dev); //JES20040127EEPROM:
+       void __iomem *ioaddr = ipg_ioaddr(dev);
        unsigned int timeout_count = 0;
 
        IPG_DEBUG_MSG("_reset\n");
@@ -429,10 +427,10 @@ static int ipg_reset(struct net_device *dev, u32 resetflags)
                if (++timeout_count > IPG_AC_RESET_TIMEOUT)
                        return -ETIME;
        }
-       /* Set LED Mode in Asic Control JES20040127EEPROM */
+       /* Set LED Mode in Asic Control */
        ipg_set_led_mode(dev);
 
-       /* Set PHYSet Register Value JES20040127EEPROM */
+       /* Set PHYSet Register Value */
        ipg_set_phy_set(dev);
        return 0;
 }
@@ -2006,7 +2004,6 @@ static void ipg_set_phy_default_param(unsigned char rev,
        }
 }
 
-/* JES20040127EEPROM */
 static int read_eeprom(struct net_device *dev, int eep_addr)
 {
        void __iomem *ioaddr = ipg_ioaddr(dev);
@@ -2073,7 +2070,7 @@ static int ipg_hw_init(struct net_device *dev)
        unsigned int i;
        int rc;
 
-       /* Read/Write and Reset EEPROM Value Jesse20040128EEPROM_VALUE */
+       /* Read/Write and Reset EEPROM Value */
        /* Read LED Mode Configuration from EEPROM */
        sp->LED_Mode = read_eeprom(dev, 6);
 

diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index 7e3ccd1..a328221 100644 (file)
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -79,7 +79,7 @@ enum ipg_regs {
        TX_STATUS               = 0x60,
        MAC_CTRL                = 0x6c,
        VLAN_TAG                = 0x70, // Unused
-       PHY_SET                 = 0x75, // JES20040127EEPROM
+       PHY_SET                 = 0x75,
        PHY_CTRL                = 0x76,
        STATION_ADDRESS_0       = 0x78,
        STATION_ADDRESS_1       = 0x7a,
@@ -312,7 +312,7 @@ enum ipg_regs {
 #define IPG_RM_RECEIVEMULTICASTHASH     0x10
 #define IPG_RM_RECEIVEIPMULTICAST       0x20
 
-/* PhySet JES20040127EEPROM*/
+/* PhySet */
 #define IPG_PS_MEM_LENB9B               0x01
 #define IPG_PS_MEM_LEN9                 0x02
 #define IPG_PS_NON_COMPDET              0x04
@@ -369,8 +369,8 @@ enum ipg_regs {
 #define IPG_AC_RST_OUT                  0x01000000
 #define IPG_AC_INT_REQUEST              0x02000000
 #define IPG_AC_RESET_BUSY               0x04000000
-#define IPG_AC_LED_SPEED                0x08000000     //JES20040127EEPROM
-#define IPG_AC_LED_MODE_BIT_1           0x20000000     //JES20040127EEPROM
+#define IPG_AC_LED_SPEED                0x08000000
+#define IPG_AC_LED_MODE_BIT_1           0x20000000
 
 /* EepromCtrl */
 #define IPG_EC_RSVD_MASK                0x83FF
@@ -785,7 +785,6 @@ struct ipg_nic_private {
        unsigned int tx_dirty;
        unsigned int rx_current;
        unsigned int rx_dirty;
-// Add by Grace 2005/05/19
 #ifdef JUMBO_FRAME
        struct SJumbo Jumbo;
 #endif
@@ -796,7 +795,6 @@ struct ipg_nic_private {
        spinlock_t lock;
        int tenmbpsmode;
 
-       /*Jesse20040128EEPROM_VALUE */
        u16 LED_Mode;
        u16 station_addr[3];    /* Station Address in EEPROM Reg 0x10..0x12 */