Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Patrick Mochel <mochel@digitalimplant.org>
Peter A Jonsson <pj@ludd.ltu.se>
+Peter Oruba <peter@oruba.de>
+Peter Oruba <peter.oruba@amd.com>
Praveen BP <praveenbp@ti.com>
Rajesh Shah <rajesh.shah@intel.com>
Ralf Baechle <ralf@linux-mips.org>
- directory with info about the I2C bus/protocol (2 wire, kHz speed).
i2o/
- directory with info about the Linux I2O subsystem.
-i386/
+x86/i386/
- directory with info about Linux on Intel 32 bit architecture.
ia64/
- directory with info about Linux on Intel 64 bit architecture.
- directory with documents regarding the 1-wire (w1) subsystem.
watchdog/
- how to auto-reboot Linux if it has "fallen and can't get up". ;-)
-x86_64/
+x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
zorro.txt
- info on writing drivers for Zorro bus devices found on Amigas.
%.ps : %.xml
$(call cmd,db2ps)
-quiet_cmd_db2pdf = PDF $@
+quiet_cmd_db2pdf = PDF $@
cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template))
%.pdf : %.xml
$(call cmd,db2pdf)
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
cat $(HTML) >> $(main_idx)
-quiet_cmd_db2html = HTML $@
+quiet_cmd_db2html = HTML $@
cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
$(patsubst %.html,%,$(notdir $@))</a><p>' > $@
<surname>Cox</surname>
<affiliation>
<address>
- <email>alan@redhat.com</email>
+ <email>alan@lxorguk.ukuu.org.uk</email>
</address>
</affiliation>
</author>
<surname>Cox</surname>
<affiliation>
<address>
- <email>alan@redhat.com</email>
+ <email>alan@lxorguk.ukuu.org.uk</email>
</address>
</affiliation>
</author>
<surname>Cox</surname>
<affiliation>
<address>
- <email>alan@redhat.com</email>
+ <email>alan@lxorguk.ukuu.org.uk</email>
</address>
</affiliation>
</author>
<surname>Cox</surname>
<affiliation>
<address>
- <email>alan@redhat.com</email>
+ <email>alan@lxorguk.ukuu.org.uk</email>
</address>
</affiliation>
</author>
budget of your group, you're almost certainly not a kernel manager.
These suggestions may or may not apply to you.
-First off, I'd suggest buying "Seven Habits of Highly Successful
+First off, I'd suggest buying "Seven Habits of Highly Effective
People", and NOT read it. Burn it, it's a great symbolic gesture.
(*) This document does so not so much by answering the question, but by
+++ /dev/null
-Empeg, Ltd's Empeg MP3 Car Audio Player
-
-The initial design is to go in your car, but you can use it at home, on a
-boat... almost anywhere. The principle is to store CD-quality music using
-MPEG technology onto a hard disk in the unit, and use the power of the
-embedded computer to serve up the music you want.
-
-For more details, see:
-
- http://www.empeg.com
-
-
-
+++ /dev/null
-Infra-red driver documentation.
-
-Mike Crowe <mac@empeg.com>
-(C) Empeg Ltd 1999
-
-Not a lot here yet :-)
-
-The Kenwood KCA-R6A remote control generates a sequence like the following:
-
-Go low for approx 16T (Around 9000us)
-Go high for approx 8T (Around 4000us)
-Go low for less than 2T (Around 750us)
-
-For each of the 32 bits
- Go high for more than 2T (Around 1500us) == 1
- Go high for less than T (Around 400us) == 0
- Go low for less than 2T (Around 750us)
-
-Rather than repeat a signal when the button is held down certain buttons
-generate the following code to indicate repetition.
-
-Go low for approx 16T
-Go high for approx 4T
-Go low for less than 2T
-
-(By removing the <2T from the start of the sequence and placing at the end
- it can be considered a stop bit but I found it easier to deal with it at
- the start).
-
-The 32 bits are encoded as XxYy where x and y are the actual data values
-while X and Y are the logical inverses of the associated data values. Using
-LSB first yields sensible codes for the numbers.
-
-All codes are of the form b9xx
-
-The numeric keys generate the code 0x where x is the number pressed.
-
-Tuner 1c
-Tape 1d
-CD 1e
-CD-MD-CH 1f
-Track- 0a
-Track+ 0b
-Rewind 0c
-FF 0d
-DNPP 5e
-Play/Pause 0e
-Vol+ 14
-Vol- 15
+++ /dev/null
-#!/bin/sh
-mknod /dev/display c 244 0
-mknod /dev/ir c 242 0
-mknod /dev/usb0 c 243 0
-mknod /dev/audio c 245 4
-mknod /dev/dsp c 245 3
-mknod /dev/mixer c 245 0
-mknod /dev/empeg_state c 246 0
-mknod /dev/radio0 c 81 64
-ln -sf radio0 radio
-ln -sf usb0 usb
--- /dev/null
+cfag12864b-example
int (*set_page_dirty)(struct page *page);
int (*readpages)(struct file *filp, struct address_space *mapping,
struct list_head *pages, unsigned nr_pages);
- int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
- int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
+ int (*write_begin)(struct file *, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned flags,
+ struct page **pagep, void **fsdata);
+ int (*write_end)(struct file *, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata);
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
writepages: no
set_page_dirty no no
readpages: no
-prepare_write: no yes yes
-commit_write: no yes yes
write_begin: no locks the page yes
write_end: no yes, unlocks yes
perform_write: no n/a yes
direct_IO: no
launder_page: no yes
- ->prepare_write(), ->commit_write(), ->sync_page() and ->readpage()
+ ->write_begin(), ->write_end(), ->sync_page() and ->readpage()
may be called from the request handler (/dev/loop).
->readpage() unlocks the page, either synchronously or via I/O
address_space has finer control of write sizes.
The read process essentially only requires 'readpage'. The write
-process is more complicated and uses prepare_write/commit_write or
+process is more complicated and uses write_begin/write_end or
set_page_dirty to write data into the address_space, and writepage,
sync_page, and writepages to writeback data to storage.
int (*set_page_dirty)(struct page *page);
int (*readpages)(struct file *filp, struct address_space *mapping,
struct list_head *pages, unsigned nr_pages);
- int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
- int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
int (*write_begin)(struct file *, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata);
readpages is only used for read-ahead, so read errors are
ignored. If anything goes wrong, feel free to give up.
- prepare_write: called by the generic write path in VM to set up a write
- request for a page. This indicates to the address space that
- the given range of bytes is about to be written. The
- address_space should check that the write will be able to
- complete, by allocating space if necessary and doing any other
- internal housekeeping. If the write will update parts of
- any basic-blocks on storage, then those blocks should be
- pre-read (if they haven't been read already) so that the
- updated blocks can be written out properly.
- The page will be locked.
-
- Note: the page _must not_ be marked uptodate in this function
- (or anywhere else) unless it actually is uptodate right now. As
- soon as a page is marked uptodate, it is possible for a concurrent
- read(2) to copy it to userspace.
-
- commit_write: If prepare_write succeeds, new data will be copied
- into the page and then commit_write will be called. It will
- typically update the size of the file (if appropriate) and
- mark the inode as dirty, and do any other related housekeeping
- operations. It should avoid returning an error if possible -
- errors should have been handled by prepare_write.
-
- write_begin: This is intended as a replacement for prepare_write. The
- key differences being that:
- - it returns a locked page (in *pagep) rather than being
- given a pre locked page;
- - it must be able to cope with short writes (where the
- length passed to write_begin is greater than the number
- of bytes copied into the page).
-
+ write_begin:
Called by the generic buffered write code to ask the filesystem to
prepare to write len bytes at the given offset in the file. The
address_space should check that the write will be able to complete,
The filesystem must return the locked pagecache page for the specified
offset, in *pagep, for the caller to write into.
+ It must be able to cope with short writes (where the length passed to
+ write_begin is greater than the number of bytes copied into the page).
+
flags is a field for AOP_FLAG_xxx flags, described in
include/linux/fs.h.
CPU#: The CPU which the process was running on.
irqs-off: 'd' interrupts are disabled. '.' otherwise.
+ Note: If the architecture does not support a way to
+ read the irq flags variable, an 'X' will always
+ be printed here.
need-resched: 'N' task need_resched is set, '.' otherwise.
chipsets as well: 635, and 635T. If anyone owns a board with those chips
AND is willing to risk crashing & burning an otherwise well-behaved kernel
in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <i2c@lm-sensors.org>. Please send bug
+via the linux-i2c mailing list: <linux-i2c@vger.kernel.org>. Please send bug
reports and/or success stories as well.
--- /dev/null
+aliasing-test
--- /dev/null
+The io_mapping functions in linux/io-mapping.h provide an abstraction for
+efficiently mapping small regions of an I/O device to the CPU. The initial
+usage is to support the large graphics aperture on 32-bit processors where
+ioremap_wc cannot be used to statically map the entire aperture to the CPU
+as it would consume too much of the kernel address space.
+
+A mapping object is created during driver initialization using
+
+ struct io_mapping *io_mapping_create_wc(unsigned long base,
+ unsigned long size)
+
+ 'base' is the bus address of the region to be made
+ mappable, while 'size' indicates how large a mapping region to
+ enable. Both are in bytes.
+
+ This _wc variant provides a mapping which may only be used
+ with the io_mapping_map_atomic_wc or io_mapping_map_wc.
+
+With this mapping object, individual pages can be mapped either atomically
+or not, depending on the necessary scheduling environment. Of course, atomic
+maps are more efficient:
+
+ void *io_mapping_map_atomic_wc(struct io_mapping *mapping,
+ unsigned long offset)
+
+ 'offset' is the offset within the defined mapping region.
+ Accessing addresses beyond the region specified in the
+ creation function yields undefined results. Using an offset
+ which is not page aligned yields an undefined result. The
+ return value points to a single page in CPU address space.
+
+ This _wc variant returns a write-combining map to the
+ page and may only be used with mappings created by
+ io_mapping_create_wc
+
+ Note that the task may not sleep while holding this page
+ mapped.
+
+ void io_mapping_unmap_atomic(void *vaddr)
+
+ 'vaddr' must be the the value returned by the last
+ io_mapping_map_atomic_wc call. This unmaps the specified
+ page and allows the task to sleep once again.
+
+If you need to sleep while holding the lock, you can use the non-atomic
+variant, although they may be significantly slower.
+
+ void *io_mapping_map_wc(struct io_mapping *mapping,
+ unsigned long offset)
+
+ This works like io_mapping_map_atomic_wc except it allows
+ the task to sleep while holding the page mapped.
+
+ void io_mapping_unmap(void *vaddr)
+
+ This works like io_mapping_unmap_atomic, except it is used
+ for pages mapped with io_mapping_map_wc.
+
+At driver close time, the io_mapping object must be freed:
+
+ void io_mapping_free(struct io_mapping *mapping)
+
+Current Implementation:
+
+The initial implementation of these functions uses existing mapping
+mechanisms and so provides only an abstraction layer and no new
+functionality.
+
+On 64-bit processors, io_mapping_create_wc calls ioremap_wc for the whole
+range, creating a permanent kernel-visible mapping to the resource. The
+map_atomic and map functions add the requested offset to the base of the
+virtual address returned by ioremap_wc.
+
+On 32-bit processors with HIGHMEM defined, io_mapping_map_atomic_wc uses
+kmap_atomic_pfn to map the specified page in an atomic fashion;
+kmap_atomic_pfn isn't really supposed to be used with device pages, but it
+provides an efficient mapping for this usage.
+
+On 32-bit processors without HIGHMEM defined, io_mapping_map_atomic_wc and
+io_mapping_map_wc both use ioremap_wc, a terribly inefficient function which
+performs an IPI to inform all processors about the new mapping. This results
+in a significant performance penalty.
Thomas Bogendörfer (tsbogend@bigbug.franken.de)
Tester, lots of bugfixes and hints.
-Alan Cox (alan@redhat.com)
+Alan Cox (alan@lxorguk.ukuu.org.uk)
For help getting into standard-kernel.
Henner Eisen (eis@baty.hanse.de)
fork. So if you have any comments or updates for this file, please try
to update the original English file first.
-Last Updated: 2008/08/21
+Last Updated: 2008/10/24
==================================
これは、
-linux-2.6.27/Documentation/HOWTO
+linux-2.6.28/Documentation/HOWTO
の和訳です。
翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/8/5
+翻訳日： 2008/10/24
翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
校正者： 松倉さん <nbh--mats at nifty dot com>
小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
新しいドキュメントファイルも追加することを勧めます。
カーネルの変更が、カーネルがユーザ空間に公開しているインターフェイスの
変更を引き起こす場合、その変更を説明するマニュアルページのパッチや情報
-ã\82\92ã\83\9eã\83\8bã\83¥ã\82¢ã\83«ã\83\9aã\83¼ã\82¸ã\81®ã\83¡ã\83³ã\83\86ã\83\8a mtk.manpages@gmail.com ã\81«é\80\81ã\82\8bã\81\93ã\81¨ã\82\92å\8b§ã\82\81ã\81¾
-す。
+ã\82\92ã\83\9eã\83\8bã\83¥ã\82¢ã\83«ã\83\9aã\83¼ã\82¸ã\81®ã\83¡ã\83³ã\83\86ã\83\8a mtk.manpages@gmail.com ã\81«é\80\81ã\82\8aã\80\81CC ã\82\92
+linux-api@ver.kernel.org に送ることを勧めます。
以下はカーネルソースツリーに含まれている読んでおくべきファイルの一覧で
す-
この他にパッチを作る方法についてのよくできた記述は-
"The Perfect Patch"
- http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ http://userweb.kernel.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ
ントの ChangeLog セクションを見てください-
"The Perfect Patch"
- http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ http://userweb.kernel.org/~akpm/stuff/tpp.txt
これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに
は数年かかるかもしれません。これは継続的な改善のプロセスであり、そのた
X86-32 X86-32, aka i386 architecture is enabled.
X86-64 X86-64 architecture is enabled.
More X86-64 boot options can be found in
- Documentation/x86_64/boot-options.txt .
+ Documentation/x86/x86_64/boot-options.txt .
X86 Either 32bit or 64bit x86 (same as X86-32+X86-64)
In addition, the following text indicates that the option:
Parameters denoted with BOOT are actually interpreted by the boot
loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/i386/boot.txt>.
+need or coordination with <Documentation/x86/i386/boot.txt>.
There are also arch-specific kernel-parameters not documented here.
-See for example <Documentation/x86_64/boot-options.txt>.
+See for example <Documentation/x86/x86_64/boot-options.txt>.
Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
a trailing = on the name of any parameter states that that parameter will
mce [X86-32] Machine Check Exception
- mce=option [X86-64] See Documentation/x86_64/boot-options.txt
+ mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt
md= [HW] RAID subsystems devices and level
See Documentation/md.txt.
See Documentation/paride.txt.
pirq= [SMP,APIC] Manual mp-table setup
- See Documentation/i386/IO-APIC.txt.
+ See Documentation/x86/i386/IO-APIC.txt.
plip= [PPT,NET] Parallel port network link
Format: { parport<nr> | timid | 0 }
See Documentation/fb/modedb.txt.
vga= [BOOT,X86-32] Select a particular video mode
- See Documentation/i386/boot.txt and
+ See Documentation/x86/i386/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is
# This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
+CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include
LDLIBS:=-lz
all: lguest
#include "linux/virtio_console.h"
#include "linux/virtio_rng.h"
#include "linux/virtio_ring.h"
-#include "asm-x86/bootparam.h"
+#include "asm/bootparam.h"
/*L:110 We can ignore the 39 include files we need for this program, but I do
* want to draw attention to the use of kernel-style types.
*
void *p = from_guest_phys(0x100000);
/* Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/i386/boot.txt) */
+ * a Linux boot header (see Documentation/x86/i386/boot.txt) */
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));
Contributors:
Marcelo Tosatti <marcelo@conectiva.com.br>
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
Jeff Garzik <jgarzik@pobox.com>
Vojtech Pavlik <vojtech@suse.cz>
- CPU Scheduler implementation hints for architecture specific code.
sched-coding.txt
- reference for various scheduler-related methods in the O(1) scheduler.
-sched-design.txt
- - goals, design and implementation of the Linux O(1) scheduler.
sched-design-CFS.txt
- goals, design and implementation of the Complete Fair Scheduler.
sched-domains.txt
People
-------------------------
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
Christoph Hellwig <hch@infradead.org> (updates for new-style PCI probing and SCSI host registration,
small cleanups/fixes)
Matt Domsch <matt_domsch@dell.com> (revision ioctl, adapter messages)
`-- sh
`-- cchips
`-- hd6446x
- |-- hd64461
- | `-- cchip-specific files
- `-- hd64465
+ `-- hd64461
`-- cchip-specific files
... and so on. Headers for the companion chips are treated the same way as
--- /dev/null
+spidev_fdx
+spidev_test
marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
security issue, or some "oh, that's not good" issue. In short, something
critical.
+ - New device IDs and quirks are also accepted.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.
- It cannot contain any "trivial" fixes in it (spelling changes,
Non-zero if the kernel has been tainted. Numeric values, which
can be ORed together:
- 1 - A module with a non-GPL license has been loaded, this
- includes modules with no license.
- Set by modutils >= 2.4.9 and module-init-tools.
- 2 - A module was force loaded by insmod -f.
- Set by modutils >= 2.4.9 and module-init-tools.
- 4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
- 64 - A module from drivers/staging was loaded.
+ 1 - A module with a non-GPL license has been loaded, this
+ includes modules with no license.
+ Set by modutils >= 2.4.9 and module-init-tools.
+ 2 - A module was force loaded by insmod -f.
+ Set by modutils >= 2.4.9 and module-init-tools.
+ 4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
+ 8 - A module was forcibly unloaded from the system by rmmod -f.
+ 16 - A hardware machine check error occurred on the system.
+ 32 - A bad page was discovered on the system.
+ 64 - The user has asked that the system be marked "tainted". This
+ could be because they are running software that directly modifies
+ the hardware, or for other reasons.
+ 128 - The system has died.
+ 256 - The ACPI DSDT has been overridden with one supplied by the user
+ instead of using the one provided by the hardware.
+ 512 - A kernel warning has occurred.
+1024 - A module from drivers/staging was loaded.
Michael Chu <mmchu@pobox.com>
AverMedia fix and more flexible card recognition
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
Video4Linux interface and 2.1.x kernel adaptation
Chris Kleitsch
--- /dev/null
+watchdog-simple
+watchdog-test
nolapic Don't use the local APIC (alias for i386 compatibility)
- pirq=... See Documentation/i386/IO-APIC.txt
+ pirq=... See Documentation/x86/i386/IO-APIC.txt
noapictimer Don't set up the APIC timer
SMP
additional_cpus=NUM Allow NUM more CPUs for hotplug
- (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec)
+ (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec)
NUMA
For more information on the features of cpusets, see Documentation/cpusets.txt.
There are a number of different configurations you can use for your needs. For
more information on the numa=fake command line option and its various ways of
-configuring fake nodes, see Documentation/x86_64/boot-options.txt.
+configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
For the purposes of this introduction, we'll assume a very primitive NUMA
emulation setup of "numa=fake=4*512,". This will split our system memory into
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
ALPHA PORT
M: philipp.zabel@gmail.com
S: Maintained
+ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
+P: Michael Petchkovsky
+M: mkpetch@internode.on.net
+S: Maintained
+
ARM/TOSA MACHINE SUPPORT
P: Dmitry Baryshkov
M: dbaryshkov@gmail.com
M: mickflemm@gmail.com
P: Luis R. Rodriguez
M: mcgrof@gmail.com
+P: Bob Copeland
+M: me@bobcopeland.com
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
S: Maintained
P: Jochen Friedrich
M: jochen@scram.de
L: linuxppc-dev@ozlabs.org
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
FREESCALE SOC FS_ENET DRIVER
I2C/SMBUS STUB DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
I2C SUBSYSTEM
M: khali@linux-fr.org
P: Ben Dooks (embedded platforms)
M: ben-linux@fluff.org
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
S: Maintained
I2C-TINY-USB DRIVER
P: Till Harbaum
M: till@harbaum.org
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
T: http://www.harbaum.org/till/i2c_tiny_usb
S: Maintained
L: linux-scsi@vger.kernel.org
S: Maintained
+LTP (Linux Test Project)
+P: Subrata Modak
+M: subrata@linux.vnet.ibm.com
+P: Mike Frysinger
+M: vapier@gentoo.org
+L: ltp-list@lists.sourceforge.net (subscribers-only)
+W: http://ltp.sourceforge.net/
+T: git kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
+S: Maintained
+
M32R ARCHITECTURE
P: Hirokazu Takata
M: takata@linux-m32r.org
OPENCORES I2C BUS DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
OPROFILE
PA SEMI SMBUS DRIVER
P: Olof Johansson
M: olof@lixom.net
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
PANASONIC LAPTOP ACPI EXTRAS DRIVER
PNXxxxx I2C DRIVER
P: Vitaly Wool
M: vitalywool@gmail.com
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
PPP PROTOCOL DRIVERS AND COMPRESSORS
SIS 96X I2C/SMBUS DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
SIS FRAMEBUFFER DRIVER
VIAPRO SMBUS DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: i2c@lm-sensors.org
+L: linux-i2c@vger.kernel.org
S: Maintained
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Killer Bat of Doom
# *DOCUMENTATION*
# The asm symlink changes when $(ARCH) changes.
# Detect this and ask user to run make mrproper
+# If asm is a stale symlink (point to dir that does not exist) remove it
define check-symlink
set -e; \
if [ -L include/asm ]; then \
echo " set ARCH or save .config and run 'make mrproper' to fix it"; \
exit 1; \
fi; \
+ test -e $$asmlink || rm include/asm; \
+ elif [ -d include/asm ]; then \
+ echo "ERROR: $@ is a directory but a symlink was expected";\
+ exit 1; \
fi
endef
define find-sources
( for arch in $(ALLSOURCE_ARCHS) ; do \
find $(__srctree)arch/$${arch} $(RCS_FIND_IGNORE) \
- -name $1 -print; \
+ -wholename $(__srctree)arch/$${arch}/include/asm -type d -prune \
+ -o -name $1 -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name $1 -print; \
/*
* Prototypes
*/
+#ifdef CONFIG_PM
static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_temp(void);
static int sharpsl_check_battery_voltage(void);
-static int sharpsl_ac_check(void);
static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
static int sharpsl_average_value(int ad);
static void sharpsl_average_clear(void);
static void sharpsl_charge_toggle(struct work_struct *private_);
return 0;
}
+#ifdef CONFIG_PM
static int sharpsl_check_battery_voltage(void)
{
int val, i, buff[5];
return 0;
}
+#endif
static int sharpsl_ac_check(void)
{
return 0;
}
-#endif
-
/*
* Check for fatal battery errors
}
}
}
-
+#else
+#define sharpsl_pm_suspend NULL
+#define sharpsl_pm_resume NULL
+#endif
static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
info->battery_life = sharpsl_pm.battstat.mainbat_percent;
}
+#ifdef CONFIG_PM
static struct platform_suspend_ops sharpsl_pm_ops = {
.enter = corgi_pxa_pm_enter,
.valid = suspend_valid_only_mem,
};
+#endif
static int __init sharpsl_pm_probe(struct platform_device *pdev)
{
apm_get_power_status = sharpsl_apm_get_power_status;
+#ifdef CONFIG_PM
suspend_set_ops(&sharpsl_pm_ops);
+#endif
mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
{
I2C_BOARD_INFO("fm3130", 0x68),
+ }, {
I2C_BOARD_INFO("24c64", 0x50),
},
};
#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
#define __ASM_ARCH_AT91RM9200_GPIO_H
+#include <linux/kernel.h>
#include <asm/irq.h>
#define PIN_BASE NR_AIC_IRQS
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
}
extern int gpio_direction_input(unsigned gpio);
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/delay.h>
},
};
+
static struct platform_device ep93xx_ohci_device = {
.name = "ep93xx-ohci",
.id = -1,
.dev = {
- .dma_mask = (void *)0xffffffff,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
.resource = ep93xx_ohci_resources,
#ifndef _IMX_GPIO_H
+#include <linux/kernel.h>
#include <mach/imx-regs.h>
#define IMX_GPIO_ALLOC_MODE_NORMAL 0
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
+
imx_gpio_free(gpio);
}
#ifndef __ASM_ARCH_IXP4XX_GPIO_H
#define __ASM_ARCH_IXP4XX_GPIO_H
+#include <linux/kernel.h>
#include <mach/hardware.h>
static inline int gpio_request(unsigned gpio, const char *label)
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
+
return;
}
#ifndef __ASM_ARCH_GPIO_H_
#define __ASM_ARCH_GPIO_H_
+#include <linux/kernel.h>
+
#define KS8695_GPIO_0 0
#define KS8695_GPIO_1 1
#define KS8695_GPIO_2 2
static inline void gpio_free(unsigned int pin)
{
+ might_sleep();
}
#endif
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include "devices.h"
+
/*!
* @file mx31ads.c
*
.virtual = AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
.length = AIPS1_SIZE,
- .type = MT_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = AIPS2_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
- .type = MT_DEVICE
+ .type = MT_DEVICE_NONSHARED
},
};
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/spinlock.h>
void gpio_free(unsigned gpio)
{
+ might_sleep();
clear_bit(gpio, gpiores);
return;
}
void gpio_free(unsigned pin)
{
+ might_sleep();
+
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return;
.read_devdata = corgipm_read_devdata,
.charger_wakeup = corgi_charger_wakeup,
.should_wakeup = corgi_should_wakeup,
-#ifdef CONFIG_BACKLIGHT_CORGI
+#if defined(CONFIG_LCD_CORGI)
+ .backlight_limit = corgi_lcd_limit_intensity,
+#elif defined(CONFIG_BACKLIGHT_CORGI)
.backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
* SharpSL Backlight
*/
extern void corgibl_limit_intensity(int limit);
+extern void corgi_lcd_limit_intensity(int limit);
/*
if (err)
goto err_free_2;
+ err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
+ if (err)
+ goto err_free_3;
+ err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
+ if (err)
+ goto err_free_3;
+ err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
+ if (err)
+ goto err_free_3;
+
if (machine_is_akita()) {
spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
return;
+err_free_3:
+ gpio_free(SPITZ_GPIO_MAX1111_CS);
err_free_2:
gpio_free(SPITZ_GPIO_LCDCON_CS);
err_free_1:
.read_devdata = spitzpm_read_devdata,
.charger_wakeup = spitz_charger_wakeup,
.should_wakeup = spitz_should_wakeup,
-#ifdef CONFIG_BACKLIGHT_CORGI
+#if defined(CONFIG_LCD_CORGI)
+ .backlight_limit = corgi_lcd_limit_intensity,
+#elif defined(CONFIG_BACKLIGHT_CORGI)
.backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
cpu_xsc3_mt_table:
.long 0x00 @ L_PTE_MT_UNCACHED
.long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE
- .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_EXT_TEX(5) | PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
.long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
.long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
.long 0x00 @ unused
struct mxc_gpio_port *port =
container_of(chip, struct mxc_gpio_port, chip);
- return (__raw_readl(port->base + GPIO_DR) >> offset) & 1;
+ return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
}
static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
+#ifdef CONFIG_ARCH_MX3
+#define __arch_ioremap __mx3_ioremap
+#define __arch_iounmap __iounmap
+
+static inline void __iomem *
+__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /* Access all peripherals below 0x80000000 as nonshared device
+ * but leave l2cc alone.
+ */
+ if ((phys_addr < 0x80000000) && ((phys_addr < L2CC_BASE_ADDR) ||
+ (phys_addr >= L2CC_BASE_ADDR + L2CC_SIZE)))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
+#endif
+
/* io address mapping macro */
#define __io(a) ((void __iomem *)(a))
ifneq ($(arch-y),)
SARCH := arch-$(arch-y)
+inc := -Iarch/cris/include/$(SARCH)
+inc += -Iarch/cris/include/$(SARCH)/arch
else
SARCH :=
+inc :=
endif
ifneq ($(mach-y),)
MACH := mach-$(mach-y)
+inc += -Iarch/cris/include/$(SARCH)/$(MACH)/
+inc += -Iarch/cris/include/$(SARCH)/$(MACH)/mach
else
MACH :=
endif
CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
-KBUILD_AFLAGS += -mlinux -march=$(arch-y) -Iinclude/asm/arch/mach -Iinclude/asm/arch
-
-KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -Iinclude/asm/arch/mach -Iinclude/asm/arch
+KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
+KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
+KBUILD_CPPFLAGS += $(inc)
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
KBUILD_CFLAGS += -fno-omit-frame-pointer
endif
-head-y := arch/$(ARCH)/$(SARCH)/kernel/head.o
+head-y := arch/cris/$(SARCH)/kernel/head.o
LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a)
-core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
-core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/
+core-y += arch/cris/kernel/ arch/cris/mm/
+core-y += arch/cris/$(SARCH)/kernel/ arch/cris/$(SARCH)/mm/
ifdef CONFIG_ETRAX_ARCH_V32
-core-y += arch/$(ARCH)/$(SARCH)/$(MACH)/
+core-y += arch/cris/$(SARCH)/$(MACH)/
endif
-drivers-y += arch/$(ARCH)/$(SARCH)/drivers/
-libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC)
+drivers-y += arch/cris/$(SARCH)/drivers/
+libs-y += arch/cris/$(SARCH)/lib/ $(LIBGCC)
# cris source path
-SRC_ARCH = $(srctree)/arch/$(ARCH)
+SRC_ARCH = $(srctree)/arch/cris
# cris object files path
-OBJ_ARCH = $(objtree)/arch/$(ARCH)
+OBJ_ARCH = $(objtree)/arch/cris
-boot := arch/$(ARCH)/boot
-MACHINE := arch/$(ARCH)/$(SARCH)
+boot := arch/cris/$(SARCH)/boot
+MACHINE := arch/cris/$(SARCH)
all: zImage
zImage Image: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch FORCE
-
-# Create some links to make all tools happy
-$(SRC_ARCH)/.links:
- @rm -rf $(SRC_ARCH)/drivers
- @ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers
- @rm -rf $(SRC_ARCH)/boot
- @ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot
- @rm -rf $(SRC_ARCH)/lib
- @ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib
- @rm -f $(SRC_ARCH)/arch/mach
- @rm -rf $(SRC_ARCH)/arch
- @ln -sfn $(SARCH) $(SRC_ARCH)/arch
-ifdef CONFIG_ETRAX_ARCH_V32
- @ln -sfn ../$(SARCH)/$(MACH) $(SRC_ARCH)/arch/mach
-endif
- @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S
- @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
- @rm -rf $(SRC_ARCH)/kernel/asm-offsets.c
- @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
- @touch $@
-
-# Create link to sub arch includes
-$(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
- @echo ' SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)'
- @rm -f $(srctree)/include/asm-$(ARCH)/arch/mach
- @rm -f $(srctree)/include/asm-$(ARCH)/arch
- @ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch
-ifdef CONFIG_ETRAX_ARCH_V32
- @ln -sf $(MACH) $(srctree)/include/asm-$(ARCH)/arch/mach
-endif
- @touch $@
+archprepare:
archclean:
- $(Q)if [ -e arch/$(ARCH)/boot ]; then \
- $(MAKE) $(clean)=arch/$(ARCH)/boot; \
+ $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
+ $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
fi
CLEAN_FILES += \
$(MACHINE)/boot/zImage \
$(MACHINE)/boot/compressed/decompress.bin \
$(MACHINE)/boot/compressed/piggy.gz \
- $(MACHINE)/boot/rescue/rescue.bin \
- $(SRC_ARCH)/.links \
- $(srctree)/include/asm-$(ARCH)/.arch
-
-MRPROPER_FILES += \
- $(SRC_ARCH)/drivers \
- $(SRC_ARCH)/boot \
- $(SRC_ARCH)/lib \
- $(SRC_ARCH)/arch \
- $(SRC_ARCH)/kernel/vmlinux.lds.S \
- $(SRC_ARCH)/kernel/asm-offsets.c
+ $(MACHINE)/boot/rescue/rescue.bin
+
+
+# MRPROPER_FILES +=
define archhelp
- echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
- echo '* Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+ echo '* zImage - Compressed kernel image (arch/cris/boot/zImage)'
+ echo '* Image - Uncompressed kernel image (arch/cris/boot/Image)'
endef
--- /dev/null
+Image
+zImage
*/
#define ASSEMBLER_MACROS_ONLY
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
#define RAM_INIT_MAGIC 0x56902387
#define COMMAND_LINE_MAGIC 0x87109563
#include <linux/types.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
/*
* gzip declarations
#ifdef CONFIG_ETRAX_AXISFLASHMAP
#define ASSEMBLER_MACROS_ONLY
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
;; The partitiontable is looked for at the first sector after the boot
;; sector. Sector size is 65536 bytes in all flashes we use.
*/
#define ASSEMBLER_MACROS_ONLY
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
#define CODE_START 0x40004000
#define CODE_LENGTH 784
*/
#define ASSEMBLER_MACROS_ONLY
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
.text
#include <asm/axisflashmap.h>
#include <asm/mmu.h>
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
#ifdef CONFIG_CRIS_LOW_MAP
#define FLASH_UNCACHED_ADDR KSEG_8
#include <asm/uaccess.h>
#include <asm/system.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/io.h>
#include <asm/rtc.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
#include "i2c.h"
#include <linux/interrupt.h>
#include <asm/etraxgpio.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
#define GPIO_MAJOR 120 /* experimental MAJOR number */
#include <asm/etraxi2c.h>
#include <asm/system.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/io.h>
#include <asm/delay.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
#include "i2c.h"
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/io.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/sync_serial.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
/* */
+++ /dev/null
-#include <linux/sched.h>
-#include <asm/thread_info.h>
-
-/*
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- */
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define BLANK() asm volatile("\n->" : : )
-
-int main(void)
-{
-#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry))
- ENTRY(orig_r10);
- ENTRY(r13);
- ENTRY(r12);
- ENTRY(r11);
- ENTRY(r10);
- ENTRY(r9);
- ENTRY(mof);
- ENTRY(dccr);
- ENTRY(srp);
- BLANK();
-#undef ENTRY
-#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
- ENTRY(task);
- ENTRY(flags);
- ENTRY(preempt_count);
- BLANK();
-#undef ENTRY
-#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry))
- ENTRY(ksp);
- ENTRY(usp);
- ENTRY(dccr);
- BLANK();
-#undef ENTRY
-#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry))
- ENTRY(pid);
- BLANK();
- DEFINE(LCLONE_VM, CLONE_VM);
- DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED);
- return 0;
-}
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
/* Export shadow registers for the CPU I/O pins */
EXPORT_SYMBOL(genconfig_shadow);
#include <linux/delay.h>
#include <linux/tty.h>
#include <asm/system.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/io.h> /* Get SIMCOUT. */
extern void reset_watchdog(void);
#include <linux/errno.h>
#include <asm/dma.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
/* Macro to access ETRAX 100 registers */
#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
#include <linux/linkage.h>
#include <linux/sys.h>
#include <asm/unistd.h>
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
#include <asm/errno.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/rtc.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/fasttimer.h>
#include <linux/proc_fs.h>
#define ASSEMBLER_MACROS_ONLY
/* The IO_* macros use the ## token concatenation operator, so
-traditional must not be used when assembling this file. */
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
#define CRAMFS_MAGIC 0x28cd3d45
#define RAM_INIT_MAGIC 0x56902387
#include <linux/module.h>
#include <linux/init.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/io.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
#define DBG(s)
#include <asm/setup.h>
#include <asm/ptrace.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/irq.h>
static int kgdb_started = 0;
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/slab.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <linux/init.h>
#ifdef CONFIG_ETRAX_GPIO
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/types.h>
#include <asm/signal.h>
#include <asm/io.h>
#include <linux/ptrace.h>
#include <asm/uaccess.h>
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
void
show_registers(struct pt_regs *regs)
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#include <asm/mmu_context.h>
/* debug of low-level TLB reload */
#include <asm/mmu.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
extern void tlb_init(void);
#include <asm/tlb.h>
#include <asm/mmu_context.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
#define D(x)
+++ /dev/null
-/* ld script to make the Linux/CRIS kernel
- * Authors: Bjorn Wesen (bjornw@axis.com)
- *
- * It is VERY DANGEROUS to fiddle around with the symbols in this
- * script. It is for example quite vital that all generated sections
- * that are used are actually named here, otherwise the linker will
- * put them at the end, where the init stuff is which is FREED after
- * the kernel has booted.
- */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-
-jiffies = jiffies_64;
-SECTIONS
-{
- . = DRAM_VIRTUAL_BASE;
- dram_start = .;
- ibr_start = .;
- . = . + 0x4000; /* see head.S and pages reserved at the start */
-
- _text = .; /* Text and read-only data */
- text_start = .; /* lots of aliases */
- _stext = .;
- __stext = .;
- .text : {
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- *(.fixup)
- *(.text.__*)
- }
-
- _etext = . ; /* End of text section */
- __etext = .;
-
- . = ALIGN(4); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- RODATA
-
- . = ALIGN (4);
- ___data_start = . ;
- __Sdata = . ;
- .data : { /* Data */
- DATA_DATA
- }
- __edata = . ; /* End of data section */
- _edata = . ;
-
- . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned */
- .data.init_task : { *(.data.init_task) }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : { INIT_DATA }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
- __vmlinux_end = .; /* last address of the physical file */
-
- /*
- * We fill to the next page, so we can discard all init
- * pages without needing to consider what payload might be
- * appended to the kernel image.
- */
- . = ALIGN(PAGE_SIZE);
-
- __init_end = .;
-
- __data_end = . ; /* Move to _edata ? */
- __bss_start = .; /* BSS */
- .bss : {
- *(COMMON)
- *(.bss)
- }
-
- . = ALIGN (0x20);
- _end = .;
- __end = .;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- EXIT_TEXT
- EXIT_DATA
- *(.exitcall.exit)
- }
-
- dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024;
-}
#define ASSEMBLER_MACROS_ONLY
#include <hwregs/asm/reg_map_asm.h>
-#include <asm/arch/mach/startup.inc>
+#include <mach/startup.inc>
#define RAM_INIT_MAGIC 0x56902387
#define COMMAND_LINE_MAGIC 0x87109563
.globl input_data
.text
-start:
+_start:
di
;; Start clocks for used blocks.
beq dram_init_finished
nop
-#include "../../mach/dram_init.S"
+#if defined CONFIG_ETRAXFS
+#include "../../mach-fs/dram_init.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../../mach-a3/dram_init.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
dram_init_finished:
_boot_source:
.dword 0
-#include "../../mach/hw_settings.S"
+#if defined CONFIG_ETRAXFS
+#include "../../mach-fs/hw_settings.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../../mach-a3/hw_settings.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
#include <asm/io.h>
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/mach/pinmux.h>
+#include <mach/pinmux.h>
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
#include "../i2c.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/memmap.h>
+#include <arch/memmap.h>
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/pio_defs.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/memmap.h>
+#include <arch/memmap.h>
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/gio_defs.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <asm/arch/hwregs/intr_vect.h>
+#include <arch/hwregs/intr_vect.h>
void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/cache.h>
-#include <asm/arch/hwregs/dma.h>
+#include <arch/cache.h>
+#include <arch/hwregs/dma.h>
/* This file is used to workaround a cache bug, Guinness TR 106. */
#include <linux/module.h>
#include <linux/irq.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/intmem.h>
-#include <asm/arch/mach/pinmux.h>
-#include <asm/arch/io.h>
+#include <arch/dma.h>
+#include <arch/intmem.h>
+#include <mach/pinmux.h>
+#include <arch/io.h>
/* Functions for allocating DMA channels */
EXPORT_SYMBOL(crisv32_request_dma);
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
#include <hwregs/dma_defs.h>
-#include <asm/arch/mach/pinmux.h>
+#include <mach/pinmux.h>
struct dbg_port
{
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
-#include <asm/arch/hwregs/asm/reg_map_asm.h>
-#include <asm/arch/hwregs/asm/intr_vect_defs_asm.h>
+#include <hwregs/asm/reg_map_asm.h>
+#include <hwregs/asm/intr_vect_defs_asm.h>
;; Exported functions.
.globl system_call
* The macros found in mmu_defs_asm.h uses the ## concatenation operator, so
* -traditional must not be used when assembling this file.
*/
+#include <linux/autoconf.h>
+#include <arch/memmap.h>
#include <hwregs/reg_rdwr.h>
-#include <asm/arch/memmap.h>
#include <hwregs/intr_vect.h>
#include <hwregs/asm/mmu_defs_asm.h>
#include <hwregs/asm/reg_map_asm.h>
-#include <asm/arch/mach/startup.inc>
+#include <mach/startup.inc>
#define CRAMFS_MAGIC 0x28cd3d45
#define JHEAD_MAGIC 0x1FF528A6
beq _dram_initialized
nop
-#include "../mach/dram_init.S"
+#if defined CONFIG_ETRAXFS
+#include "../mach-fs/dram_init.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../mach-a3/dram_init.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
+
_dram_initialized:
;; Copy the text and data section to DRAM. This depends on that the
.section ".init.data", "aw"
-#include "../mach/hw_settings.S"
+#if defined CONFIG_ETRAXFS
+#include "../mach-fs/hw_settings.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../mach-a3/hw_settings.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
#include <asm/ptrace.h>
#include <asm/irq.h>
-#include <asm/arch/hwregs/reg_map.h>
-#include <asm/arch/hwregs/reg_rdwr.h>
-#include <asm/arch/hwregs/intr_vect_defs.h>
-#include <asm/arch/hwregs/ser_defs.h>
+#include <arch/hwregs/reg_map.h>
+#include <arch/hwregs/reg_rdwr.h>
+#include <arch/hwregs/intr_vect_defs.h>
+#include <arch/hwregs/ser_defs.h>
/* From entry.S. */
extern void gdb_handle_exception(void);
* port exceptions for kernel debugging purposes.
*/
-#include <asm/arch/hwregs/intr_vect.h>
+#include <arch/hwregs/intr_vect.h>
;; Exported functions.
.globl kgdb_handle_exception
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/spinlock.h>
-#include <asm/arch/hwregs/reg_map.h>
-#include <asm/arch/hwregs/reg_rdwr.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/hwregs/pinmux_defs.h>
+#include <arch/hwregs/reg_map.h>
+#include <arch/hwregs/reg_rdwr.h>
+#include <arch/pinmux.h>
+#include <arch/hwregs/pinmux_defs.h>
#undef DEBUG
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
-#include <asm/arch/hwregs/supp_reg.h>
+#include <arch/hwregs/supp_reg.h>
/*
* Determines which bits in CCS the user has access to.
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
-#include <asm/arch/ptrace.h>
-#include <asm/arch/hwregs/cpu_vect.h>
+#include <arch/ptrace.h>
+#include <arch/hwregs/cpu_vect.h>
extern unsigned long cris_signal_return_page;
##
##=============================================================================
-#include <asm/arch/hwregs/asm/reg_map_asm.h>
-#include <asm/arch/hwregs/asm/gio_defs_asm.h>
-#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
-#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
-#include <asm/arch/hwregs/asm/config_defs_asm.h>
+#include <arch/hwregs/asm/reg_map_asm.h>
+#include <arch/hwregs/asm/gio_defs_asm.h>
+#include <arch/hwregs/asm/pinmux_defs_asm.h>
+#include <arch/hwregs/asm/bif_core_defs_asm.h>
+#include <arch/hwregs/asm/config_defs_asm.h>
;; There are 8-bit NAND flashes and 16-bit NAND flashes.
;; We need to treat them slightly different.
#include <linux/kernel.h>
#include <linux/spinlock.h>
-#include <asm/arch/mach/dma.h>
+#include <mach/dma.h>
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/marb_defs.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/mach/pinmux.h>
+#include <mach/pinmux.h>
#include <hwregs/gio_defs.h>
struct crisv32_ioport crisv32_ioports[] = {
#include <linux/module.h>
#include <linux/cpufreq.h>
#include <hwregs/reg_map.h>
-#include <asm/arch/hwregs/reg_rdwr.h>
-#include <asm/arch/hwregs/config_defs.h>
-#include <asm/arch/hwregs/bif_core_defs.h>
+#include <arch/hwregs/reg_rdwr.h>
+#include <arch/hwregs/config_defs.h>
+#include <arch/hwregs/bif_core_defs.h>
static int
cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
#include <hwregs/strmux_defs.h>
#include <linux/errno.h>
#include <asm/system.h>
-#include <asm/arch/mach/arbiter.h>
+#include <mach/arbiter.h>
static char used_dma_channels[MAX_DMA_CHANNELS];
static const char *used_dma_channels_users[MAX_DMA_CHANNELS];
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/hwregs/gio_defs.h>
+#include <mach/pinmux.h>
+#include <hwregs/gio_defs.h>
#ifndef DEBUG
#define DEBUG(x)
#include "vcs_hook.h"
#include <stdarg.h>
-#include <asm/arch-v32/hwregs/reg_map.h>
-#include <asm/arch-v32/hwregs/intr_vect_defs.h>
+#include <arch-v32/hwregs/reg_map.h>
+#include <arch-v32/hwregs/intr_vect_defs.h>
#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */
#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */
#include <asm/mmu.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
-#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
-#include <asm/arch/hwregs/supp_reg.h>
+#include <arch/hwregs/asm/mmu_defs_asm.h>
+#include <arch/hwregs/supp_reg.h>
extern void tlb_init(void);
#include <asm/tlb.h>
#include <asm/mmu_context.h>
-#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
-#include <asm/arch/hwregs/supp_reg.h>
+#include <arch/hwregs/asm/mmu_defs_asm.h>
+#include <arch/hwregs/supp_reg.h>
#define UPDATE_TLB_SEL_IDX(val) \
do { \
#ifndef _ASM_ARCH_CRIS_IO_H
#define _ASM_ARCH_CRIS_IO_H
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
/* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */
#ifndef _ASM_ARCH_IRQ_H
#define _ASM_ARCH_IRQ_H
-#include <asm/arch/sv_addr_ag.h>
+#include <arch/sv_addr_ag.h>
#define NR_IRQS 32
#ifndef _ASM_CRIS_ARCH_CACHE_H
#define _ASM_CRIS_ARCH_CACHE_H
-#include <asm/arch/hwregs/dma.h>
+#include <arch/hwregs/dma.h>
/* A cache-line is 32 bytes. */
#define L1_CACHE_BYTES 32
/********** The API to use from inside the kernel. ************/
-#include <asm/arch/hwregs/dma.h>
+#include <arch/hwregs/dma.h>
typedef enum {
cryptocop_alg_csum = 0,
static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
{
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags);
if (val)
static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
enum crisv32_io_dir dir)
{
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags);
if (dir == crisv32_io_dir_in)
#include <linux/compiler.h>
#include <asm/system.h>
-#include <asm/arch/atomic.h>
+#include <arch/atomic.h>
/*
* Atomic operations that C can't guarantee us. Useful for
#error only <linux/bitops.h> can be included directly
#endif
-#include <asm/arch/bitops.h>
+#include <arch/bitops.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <linux/compiler.h>
#ifndef _CRIS_BUG_H
#define _CRIS_BUG_H
-#include <asm/arch/bug.h>
+#include <arch/bug.h>
#endif
#ifdef __GNUC__
#ifdef __KERNEL__
-#include <asm/arch/byteorder.h>
+#include <arch/byteorder.h>
/* defines are necessary because the other files detect the presence
* of a defined __arch_swab32, not an inline
#ifndef _ASM_CACHE_H
#define _ASM_CACHE_H
-#include <asm/arch/cache.h>
+#include <arch/cache.h>
#endif /* _ASM_CACHE_H */
#ifndef _CRIS_CHECKSUM_H
#define _CRIS_CHECKSUM_H
-#include <asm/arch/checksum.h>
+#include <arch/checksum.h>
/*
* computes the checksum of a memory block at buff, length len,
* Delay routines, using a pre-computed "loops_per_second" value.
*/
-#include <asm/arch/delay.h>
+#include <arch/delay.h>
/* Use only for very small delays ( < 1 msec). */
#ifndef _ASM_DMA_H
#define _ASM_DMA_H
-#include <asm/arch/dma.h>
+#include <arch/dma.h>
/* it's useless on the Etrax, but unfortunately needed by the new
bootmem allocator (but this should do it for this) */
#define ELF_DATA ELFDATA2LSB
#define ELF_ARCH EM_CRIS
-#include <asm/arch/elf.h>
+#include <arch/elf.h>
/* The master for these definitions is {binutils}/include/elf/cris.h: */
/* User symbols in this file have a leading underscore. */
#define _ASM_CRIS_IO_H
#include <asm/page.h> /* for __va, __pa */
-#include <asm/arch/io.h>
+#include <arch/io.h>
#include <linux/kernel.h>
struct cris_io_operations
#ifndef _ASM_IRQ_H
#define _ASM_IRQ_H
-#include <asm/arch/irq.h>
+#include <arch/irq.h>
static inline int irq_canonicalize(int irq)
{
#ifndef _CRIS_MMU_H
#define _CRIS_MMU_H
-#include <asm/arch/mmu.h>
+#include <arch/mmu.h>
#endif
#ifndef _CRIS_PAGE_H
#define _CRIS_PAGE_H
-#include <asm/arch/page.h>
+#include <arch/page.h>
#include <linux/const.h>
/* PAGE_SHIFT determines the page size */
#include <linux/sched.h>
#include <asm/mmu.h>
#endif
-#include <asm/arch/pgtable.h>
+#include <arch/pgtable.h>
/*
* The Linux memory management assumes a three-level page table setup. On
#include <asm/system.h>
#include <asm/page.h>
#include <asm/ptrace.h>
-#include <asm/arch/processor.h>
+#include <arch/processor.h>
struct task_struct;
#ifndef _CRIS_PTRACE_H
#define _CRIS_PTRACE_H
-#include <asm/arch/ptrace.h>
+#include <arch/ptrace.h>
#ifdef __KERNEL__
--- /dev/null
+#include <arch/spinlock.h>
#ifndef __ASM_CRIS_SYSTEM_H
#define __ASM_CRIS_SYSTEM_H
-#include <asm/arch/system.h>
+#include <arch/system.h>
/* the switch_to macro calls resume, an asm function in entry.S which does the actual
* task switching.
#ifndef __ASSEMBLY__
#include <asm/types.h>
#include <asm/processor.h>
-#include <asm/arch/thread_info.h>
+#include <arch/thread_info.h>
#include <asm/segment.h>
#endif
#ifndef _ASM_CRIS_TIMEX_H
#define _ASM_CRIS_TIMEX_H
-#include <asm/arch/timex.h>
+#include <arch/timex.h>
/*
* We don't have a cycle-counter.. but we do not support SMP anyway where this is
#include <linux/pagemap.h>
-#include <asm/arch/tlb.h>
+#include <arch/tlb.h>
/*
* cris doesn't need any special per-pte or
#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size)))
#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
-#include <asm/arch/uaccess.h>
+#include <arch/uaccess.h>
/*
* The exception table consists of pairs of addresses: the first is the
#define NR_syscalls 327
-#include <asm/arch/unistd.h>
+#include <arch/unistd.h>
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#include <linux/types.h>
#include <asm/ptrace.h>
#include <asm/page.h>
-#include <asm/arch/user.h>
+#include <arch/user.h>
/*
* Core file format: The core file is written in such a way that gdb
#include <linux/sched.h>
#include <asm/thread_info.h>
+#include <linux/autoconf.h>
/*
* Generate definitions needed by assembly language modules.
*/
#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
#define BLANK() asm volatile("\n->" : : )
+#if !defined(CONFIG_ETRAX_ARCH_V10) && !defined(CONFIG_ETRAX_ARCH_V32)
+#error One of ARCH v10 and ARCH v32 must be true!
+#endif
+
int main(void)
{
#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry))
ENTRY(r13);
ENTRY(r12);
ENTRY(r11);
- ENTRY(r10);
- ENTRY(r9);
+ ENTRY(r10);
+ ENTRY(r9);
+#ifdef CONFIG_ETRAX_ARCH_V32
ENTRY(acr);
ENTRY(srs);
- ENTRY(mof);
- ENTRY(ccs);
- ENTRY(srp);
+#endif
+ ENTRY(mof);
+#ifdef CONFIG_ETRAX_ARCH_V10
+ ENTRY(dccr);
+#else
+ ENTRY(ccs);
+#endif
+ ENTRY(srp);
BLANK();
#undef ENTRY
#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
- ENTRY(task);
- ENTRY(flags);
- ENTRY(preempt_count);
- BLANK();
+ ENTRY(task);
+ ENTRY(flags);
+ ENTRY(preempt_count);
+ BLANK();
#undef ENTRY
#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry))
ENTRY(ksp);
- ENTRY(usp);
- ENTRY(ccs);
- BLANK();
+ ENTRY(usp);
+#ifdef CONFIG_ETRAX_ARCH_V10
+ ENTRY(dccr);
+#else
+ ENTRY(ccs);
+#endif
+ BLANK();
#undef ENTRY
#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry))
- ENTRY(pid);
- BLANK();
- DEFINE(LCLONE_VM, CLONE_VM);
- DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED);
- return 0;
+ ENTRY(pid);
+ BLANK();
+ DEFINE(LCLONE_VM, CLONE_VM);
+ DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED);
+ return 0;
}
* the kernel has booted.
*/
+#include <linux/autoconf.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#define __CONFIG_ETRAX_VMEM_SIZE 0
#endif
+
jiffies = jiffies_64;
SECTIONS
{
. = DRAM_VIRTUAL_BASE;
dram_start = .;
+#ifdef CONFIG_ETRAX_ARCH_V10
+ ibr_start = .;
+#else
ebp_start = .;
-
/* The boot section is only necessary until the VCS top */
/* level testbench includes both flash and DRAM. */
.boot : { *(.boot) }
+#endif
- /* See head.S and pages reserved at the start. */
+ /* see head.S and pages reserved at the start */
. = DRAM_VIRTUAL_BASE + 0x4000;
- _text = .; /* Text and read-only data. */
- text_start = .; /* Lots of aliases. */
+ _text = .; /* Text and read-only data. */
+ text_start = .; /* Lots of aliases. */
_stext = .;
__stext = .;
.text : {
*(.text.__*)
}
- _etext = . ; /* End of text section. */
+ _etext = . ; /* End of text section. */
__etext = .;
- . = ALIGN(4); /* Exception table. */
+ . = ALIGN(4); /* Exception table. */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN (4);
___data_start = . ;
__Sdata = . ;
- .data : { /* Data */
+ .data : { /* Data */
DATA_DATA
}
- __edata = . ; /* End of data section. */
+ __edata = . ; /* End of data section. */
_edata = . ;
. = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */
.data.init_task : { *(.data.init_task) }
- . = ALIGN(PAGE_SIZE); /* Init code and data. */
+ . = ALIGN(PAGE_SIZE); /* Init code and data. */
__init_begin = .;
.init.text : {
_sinittext = .;
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
+#ifdef CONFIG_ETRAX_ARCH_V32
__start___param = .;
__param : { *(__param) }
__stop___param = .;
+#endif
.initcall.init : {
__initcall_start = .;
INITCALLS
}
SECURITY_INIT
- __vmlinux_end = .; /* Last address of the physical file. */
+#ifdef CONFIG_ETRAX_ARCH_V10
+#ifdef CONFIG_BLK_DEV_INITRD
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+#endif
+ __vmlinux_end = .; /* Last address of the physical file. */
+#ifdef CONFIG_ETRAX_ARCH_V32
PERCPU(PAGE_SIZE)
.init.ramfs : {
*(.init.ramfs)
__initramfs_end = .;
}
+#endif
/*
* We fill to the next page, so we can discard all init
* pages without needing to consider what payload might be
* appended to the kernel image.
*/
- . = ALIGN (PAGE_SIZE);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
- __data_end = . ; /* Move to _edata? */
- __bss_start = .; /* BSS. */
+ __data_end = . ; /* Move to _edata ? */
+ __bss_start = .; /* BSS. */
.bss : {
*(COMMON)
*(.bss)
#include <linux/vmalloc.h>
#include <linux/io.h>
#include <asm/pgalloc.h>
-#include <asm/arch/memmap.h>
+#include <arch/memmap.h>
/*
* Generic mapping function (not visible outside):
extern int iommu_detected;
extern void iommu_dma_init(void);
extern void machvec_init(const char *name);
-extern int forbid_dac;
#endif
{
struct dma_mapping_ops *ops = get_dma_ops(dev);
-#ifdef CONFIG_PCI
- if (mask > 0xffffffff && forbid_dac > 0) {
- dev_info(dev, "Disallowing DAC for device\n");
- return 0;
- }
-#endif
-
if (ops->dma_supported_op)
return ops->dma_supported_op(dev, mask);
return -EBADF;
}
- if (filp->f_flags & FASYNC) {
- DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
- pfm_do_fasync(-1, filp, ctx, 0);
- }
-
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select SGI_HAS_DS1286
select SGI_HAS_I8042
select SGI_HAS_INDYDOG
select SGI_HAS_HAL2
select HW_HAS_EISA
select I8253
select I8259
- select SGI_HAS_DS1286
select SGI_HAS_I8042
select SGI_HAS_INDYDOG
select SGI_HAS_HAL2
config SERIAL_RM9000
bool
-config SGI_HAS_DS1286
- bool
-
config SGI_HAS_INDYDOG
bool
CONFIG_INDYDOG=m
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_SGI_DS1286=m
# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_RTC is not set
-CONFIG_SGI_IP27_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_SGI_HAS_DS1286=y
CONFIG_SGI_HAS_INDYDOG=y
CONFIG_SGI_HAS_SEEQ=y
CONFIG_SGI_HAS_WD93=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_SGI_DS1286=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
__clear_bit(nr, addr);
}
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-
/*
* Return the bit position (0..63) of the most significant 1 bit in a word
* Returns -1 if no 1 bit exists
*/
-static inline unsigned long __fls(unsigned long x)
+static inline unsigned long __fls(unsigned long word)
{
- int lz;
+ int num;
- if (sizeof(x) == 4) {
+ if (BITS_PER_LONG == 32 &&
+ __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
- : "=r" (lz)
- : "r" (x));
+ : "=r" (num)
+ : "r" (word));
- return 31 - lz;
+ return 31 - num;
}
- BUG_ON(sizeof(x) != 8);
+ if (BITS_PER_LONG == 64 &&
+ __builtin_constant_p(cpu_has_mips64) && cpu_has_mips64) {
+ __asm__(
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (num)
+ : "r" (word));
- __asm__(
- " .set push \n"
- " .set mips64 \n"
- " dclz %0, %1 \n"
- " .set pop \n"
- : "=r" (lz)
- : "r" (x));
+ return 63 - num;
+ }
+
+ num = BITS_PER_LONG - 1;
- return 63 - lz;
+#if BITS_PER_LONG == 64
+ if (!(word & (~0ul << 32))) {
+ num -= 32;
+ word <<= 32;
+ }
+#endif
+ if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+ num -= 16;
+ word <<= 16;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+ num -= 8;
+ word <<= 8;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+ num -= 4;
+ word <<= 4;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+ num -= 2;
+ word <<= 2;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-1))))
+ num -= 1;
+ return num;
}
/*
* This is defined the same way as ffs.
* Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
*/
-static inline int fls(int word)
+static inline int fls(int x)
{
- __asm__("clz %0, %1" : "=r" (word) : "r" (word));
+ int r;
- return 32 - word;
-}
+ if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ __asm__("clz %0, %1" : "=r" (x) : "r" (x));
-#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
-static inline int fls64(__u64 word)
-{
- __asm__("dclz %0, %1" : "=r" (word) : "r" (word));
+ return 32 - x;
+ }
- return 64 - word;
+ r = 32;
+ if (!x)
+ return 0;
+ if (!(x & 0xffff0000u)) {
+ x <<= 16;
+ r -= 16;
+ }
+ if (!(x & 0xff000000u)) {
+ x <<= 8;
+ r -= 8;
+ }
+ if (!(x & 0xf0000000u)) {
+ x <<= 4;
+ r -= 4;
+ }
+ if (!(x & 0xc0000000u)) {
+ x <<= 2;
+ r -= 2;
+ }
+ if (!(x & 0x80000000u)) {
+ x <<= 1;
+ r -= 1;
+ }
+ return r;
}
-#else
+
#include <asm-generic/bitops/fls64.h>
-#endif
/*
* ffs - find first bit set.
return fls(word & -word);
}
-#else
-
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
-
#include <asm-generic/bitops/ffz.h>
#include <asm-generic/bitops/find.h>
#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
#define BRK_BUG 512 /* Used by BUG() */
#define BRK_KDB 513 /* Used in KDB_ENTER() */
+#define BRK_MEMU 514 /* Used by FPU emulator */
#define BRK_MULOVF 1023 /* Multiply overflow */
#endif /* __ASM_BREAK_H */
#include <linux/compiler.h>
#include <asm/types.h>
-#ifdef __GNUC__
+#if defined(__MIPSEB__)
+# define __BIG_ENDIAN
+#elif defined(__MIPSEL__)
+# define __LITTLE_ENDIAN
+#else
+# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#define __SWAB_64_THRU_32__
#ifdef CONFIG_CPU_MIPSR2
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
" wsbh %0, %1 \n"
return x;
}
-#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch_swab16 __arch_swab16
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
" wsbh %0, %1 \n"
return x;
}
-#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch_swab32 __arch_swab32
#ifdef CONFIG_CPU_MIPS64_R2
-
-static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
" dsbh %0, %1 \n"
return x;
}
-
-#define __arch__swab64(x) ___arch__swab64(x)
-
+#define __arch_swab64 __arch_swab64
#endif /* CONFIG_CPU_MIPS64_R2 */
#endif /* CONFIG_CPU_MIPSR2 */
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#if defined(__MIPSEB__)
-# include <linux/byteorder/big_endian.h>
-#elif defined(__MIPSEL__)
-# include <linux/byteorder/little_endian.h>
-#else
-# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
-#endif
+#include <linux/byteorder.h>
#endif /* _ASM_BYTEORDER_H */
#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2)
#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
+ cpu_has_mips64r1 | cpu_has_mips64r2)
#ifndef cpu_has_dsp
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Machine dependent access functions for RTC registers.
- *
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef _ASM_DS1286_H
-#define _ASM_DS1286_H
-
-#include <ds1286.h>
-
-#endif /* _ASM_DS1286_H */
#ifndef _ASM_FPU_EMULATOR_H
#define _ASM_FPU_EMULATOR_H
+#include <asm/break.h>
+#include <asm/inst.h>
+
struct mips_fpu_emulator_stats {
unsigned int emulated;
unsigned int loads;
extern struct mips_fpu_emulator_stats fpuemustats;
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
+ unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
+
+/*
+ * Instruction inserted following the badinst to further tag the sequence
+ */
+#define BD_COOKIE 0x0000bd36 /* tne $0, $0 with baggage */
+
+/*
+ * Break instruction with special math emu break code set
+ */
+#define BREAK_MATH (0x0000000d | (BRK_MEMU << 16))
+
#endif /* _ASM_FPU_EMULATOR_H */
+++ /dev/null
-/*
- * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
- */
-#ifndef _ASM_M48T35_H
-#define _ASM_M48T35_H
-
-#include <linux/spinlock.h>
-
-extern spinlock_t rtc_lock;
-
-struct m48t35_rtc {
- volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */
- volatile u8 control;
- volatile u8 sec;
- volatile u8 min;
- volatile u8 hour;
- volatile u8 day;
- volatile u8 date;
- volatile u8 month;
- volatile u8 year;
-};
-
-#define M48T35_RTC_SET 0x80
-#define M48T35_RTC_STOPPED 0x80
-#define M48T35_RTC_READ 0x40
-
-#endif /* _ASM_M48T35_H */
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
-static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
+static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & 0xff00) {
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
+ __cpu_name[cpu] = "R2000";
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
- if ((c->processor_id & 0xff) == PRID_REV_R3000A)
- if (cpu_has_confreg())
+ if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+ if (cpu_has_confreg()) {
c->cputype = CPU_R3081E;
- else
+ __cpu_name[cpu] = "R3081";
+ } else {
c->cputype = CPU_R3000A;
- else
+ __cpu_name[cpu] = "R3000A";
+ }
+ break;
+ } else {
c->cputype = CPU_R3000;
+ __cpu_name[cpu] = "R3000";
+ }
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400PC;
- else
+ __cpu_name[cpu] = "R4400PC";
+ } else {
c->cputype = CPU_R4000PC;
+ __cpu_name[cpu] = "R4000PC";
+ }
} else {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400SC;
- else
+ __cpu_name[cpu] = "R4400SC";
+ } else {
c->cputype = CPU_R4000SC;
+ __cpu_name[cpu] = "R4000SC";
+ }
}
c->isa_level = MIPS_CPU_ISA_III;
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
+ __cpu_name[cpu] = "NEC VR4111";
break;
case PRID_REV_VR4121:
c->cputype = CPU_VR4121;
+ __cpu_name[cpu] = "NEC VR4121";
break;
case PRID_REV_VR4122:
- if ((c->processor_id & 0xf) < 0x3)
+ if ((c->processor_id & 0xf) < 0x3) {
c->cputype = CPU_VR4122;
- else
+ __cpu_name[cpu] = "NEC VR4122";
+ } else {
c->cputype = CPU_VR4181A;
+ __cpu_name[cpu] = "NEC VR4181A";
+ }
break;
case PRID_REV_VR4130:
- if ((c->processor_id & 0xf) < 0x4)
+ if ((c->processor_id & 0xf) < 0x4) {
c->cputype = CPU_VR4131;
- else
+ __cpu_name[cpu] = "NEC VR4131";
+ } else {
c->cputype = CPU_VR4133;
+ __cpu_name[cpu] = "NEC VR4133";
+ }
break;
default:
printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
c->cputype = CPU_VR41XX;
+ __cpu_name[cpu] = "NEC Vr41xx";
break;
}
c->isa_level = MIPS_CPU_ISA_III;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
+ __cpu_name[cpu] = "R4300";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
+ __cpu_name[cpu] = "R4600";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
* it's c0_prid id number with the TX3900.
*/
c->cputype = CPU_R4650;
+ __cpu_name[cpu] = "R4650";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
c->tlbsize = 48;
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
c->cputype = CPU_TX3927;
+ __cpu_name[cpu] = "TX3927";
c->tlbsize = 64;
} else {
switch (c->processor_id & 0xff) {
case PRID_REV_TX3912:
c->cputype = CPU_TX3912;
+ __cpu_name[cpu] = "TX3912";
c->tlbsize = 32;
break;
case PRID_REV_TX3922:
c->cputype = CPU_TX3922;
+ __cpu_name[cpu] = "TX3922";
c->tlbsize = 64;
break;
- default:
- c->cputype = CPU_UNKNOWN;
- break;
}
}
break;
case PRID_IMP_R4700:
c->cputype = CPU_R4700;
+ __cpu_name[cpu] = "R4700";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_TX49:
c->cputype = CPU_TX49XX;
+ __cpu_name[cpu] = "R49XX";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_LLSC;
if (!(c->processor_id & 0x08))
break;
case PRID_IMP_R5000:
c->cputype = CPU_R5000;
+ __cpu_name[cpu] = "R5000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R5432:
c->cputype = CPU_R5432;
+ __cpu_name[cpu] = "R5432";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
break;
case PRID_IMP_R5500:
c->cputype = CPU_R5500;
+ __cpu_name[cpu] = "R5500";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
break;
case PRID_IMP_NEVADA:
c->cputype = CPU_NEVADA;
+ __cpu_name[cpu] = "Nevada";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
break;
case PRID_IMP_R6000:
c->cputype = CPU_R6000;
+ __cpu_name[cpu] = "R6000";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R6000A:
c->cputype = CPU_R6000A;
+ __cpu_name[cpu] = "R6000A";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
break;
case PRID_IMP_RM7000:
c->cputype = CPU_RM7000;
+ __cpu_name[cpu] = "RM7000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_RM9000:
c->cputype = CPU_RM9000;
+ __cpu_name[cpu] = "RM9000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R8000:
c->cputype = CPU_R8000;
+ __cpu_name[cpu] = "RM8000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R10000:
c->cputype = CPU_R10000;
+ __cpu_name[cpu] = "R10000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R12000:
c->cputype = CPU_R12000;
+ __cpu_name[cpu] = "R12000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R14000:
c->cputype = CPU_R14000;
+ __cpu_name[cpu] = "R14000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_LOONGSON2:
c->cputype = CPU_LOONGSON2;
+ __cpu_name[cpu] = "ICT Loongson-2";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS |
MIPS_CPU_FPU | MIPS_CPU_LLSC |
static void __cpuinit decode_configs(struct cpuinfo_mips *c)
{
+ int ok;
+
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- /* Read Config registers. */
- if (!decode_config0(c))
- return; /* actually worth a panic() */
- if (!decode_config1(c))
- return;
- if (!decode_config2(c))
- return;
- if (!decode_config3(c))
- return;
+ ok = decode_config0(c); /* Read Config registers. */
+ BUG_ON(!ok); /* Arch spec violation! */
+ if (ok)
+ ok = decode_config1(c);
+ if (ok)
+ ok = decode_config2(c);
+ if (ok)
+ ok = decode_config3(c);
+
+ mips_probe_watch_registers(c);
}
#ifdef CONFIG_CPU_MIPSR2
static inline void spram_config(void) {}
#endif
-static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
- mips_probe_watch_registers(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
+ __cpu_name[cpu] = "MIPS 4Kc";
break;
case PRID_IMP_4KEC:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KECR2:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KSC:
case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
+ __cpu_name[cpu] = "MIPS 4KSc";
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
+ __cpu_name[cpu] = "MIPS 5Kc";
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
+ __cpu_name[cpu] = "MIPS 20Kc";
break;
case PRID_IMP_24K:
case PRID_IMP_24KE:
c->cputype = CPU_24K;
+ __cpu_name[cpu] = "MIPS 24Kc";
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
+ __cpu_name[cpu] = "MIPS 25Kc";
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
+ __cpu_name[cpu] = "MIPS 34Kc";
break;
case PRID_IMP_74K:
c->cputype = CPU_74K;
+ __cpu_name[cpu] = "MIPS 74Kc";
break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
+ __cpu_name[cpu] = "MIPS 1004Kc";
break;
}
spram_config();
}
-static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
+static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch ((c->processor_id >> 24) & 0xff) {
case 0:
c->cputype = CPU_AU1000;
+ __cpu_name[cpu] = "Au1000";
break;
case 1:
c->cputype = CPU_AU1500;
+ __cpu_name[cpu] = "Au1500";
break;
case 2:
c->cputype = CPU_AU1100;
+ __cpu_name[cpu] = "Au1100";
break;
case 3:
c->cputype = CPU_AU1550;
+ __cpu_name[cpu] = "Au1550";
break;
case 4:
c->cputype = CPU_AU1200;
- if (2 == (c->processor_id & 0xff))
+ __cpu_name[cpu] = "Au1200";
+ if ((c->processor_id & 0xff) == 2) {
c->cputype = CPU_AU1250;
+ __cpu_name[cpu] = "Au1250";
+ }
break;
case 5:
c->cputype = CPU_AU1210;
+ __cpu_name[cpu] = "Au1210";
break;
default:
panic("Unknown Au Core!");
}
}
-static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
+static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
+ __cpu_name[cpu] = "SiByte SB1";
/* FPU in pass1 is known to have issues. */
if ((c->processor_id & 0xff) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;
+ __cpu_name[cpu] = "SiByte SB1A";
break;
}
}
-static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
+static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
+ __cpu_name[cpu] = "Sandcraft SR71000";
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
-static inline void cpu_probe_nxp(struct cpuinfo_mips *c)
+static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_PR4450:
c->cputype = CPU_PR4450;
+ __cpu_name[cpu] = "Philips PR4450";
c->isa_level = MIPS_CPU_ISA_M32R1;
break;
- default:
- panic("Unknown NXP Core!"); /* REVISIT: die? */
- break;
}
}
-
-static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_BCM3302:
c->cputype = CPU_BCM3302;
+ __cpu_name[cpu] = "Broadcom BCM3302";
break;
case PRID_IMP_BCM4710:
c->cputype = CPU_BCM4710;
- break;
- default:
- c->cputype = CPU_UNKNOWN;
+ __cpu_name[cpu] = "Broadcom BCM4710";
break;
}
}
const char *__cpu_name[NR_CPUS];
-/*
- * Name a CPU
- */
-static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c)
-{
- const char *name = NULL;
-
- switch (c->cputype) {
- case CPU_UNKNOWN: name = "unknown"; break;
- case CPU_R2000: name = "R2000"; break;
- case CPU_R3000: name = "R3000"; break;
- case CPU_R3000A: name = "R3000A"; break;
- case CPU_R3041: name = "R3041"; break;
- case CPU_R3051: name = "R3051"; break;
- case CPU_R3052: name = "R3052"; break;
- case CPU_R3081: name = "R3081"; break;
- case CPU_R3081E: name = "R3081E"; break;
- case CPU_R4000PC: name = "R4000PC"; break;
- case CPU_R4000SC: name = "R4000SC"; break;
- case CPU_R4000MC: name = "R4000MC"; break;
- case CPU_R4200: name = "R4200"; break;
- case CPU_R4400PC: name = "R4400PC"; break;
- case CPU_R4400SC: name = "R4400SC"; break;
- case CPU_R4400MC: name = "R4400MC"; break;
- case CPU_R4600: name = "R4600"; break;
- case CPU_R6000: name = "R6000"; break;
- case CPU_R6000A: name = "R6000A"; break;
- case CPU_R8000: name = "R8000"; break;
- case CPU_R10000: name = "R10000"; break;
- case CPU_R12000: name = "R12000"; break;
- case CPU_R14000: name = "R14000"; break;
- case CPU_R4300: name = "R4300"; break;
- case CPU_R4650: name = "R4650"; break;
- case CPU_R4700: name = "R4700"; break;
- case CPU_R5000: name = "R5000"; break;
- case CPU_R5000A: name = "R5000A"; break;
- case CPU_R4640: name = "R4640"; break;
- case CPU_NEVADA: name = "Nevada"; break;
- case CPU_RM7000: name = "RM7000"; break;
- case CPU_RM9000: name = "RM9000"; break;
- case CPU_R5432: name = "R5432"; break;
- case CPU_4KC: name = "MIPS 4Kc"; break;
- case CPU_5KC: name = "MIPS 5Kc"; break;
- case CPU_R4310: name = "R4310"; break;
- case CPU_SB1: name = "SiByte SB1"; break;
- case CPU_SB1A: name = "SiByte SB1A"; break;
- case CPU_TX3912: name = "TX3912"; break;
- case CPU_TX3922: name = "TX3922"; break;
- case CPU_TX3927: name = "TX3927"; break;
- case CPU_AU1000: name = "Au1000"; break;
- case CPU_AU1500: name = "Au1500"; break;
- case CPU_AU1100: name = "Au1100"; break;
- case CPU_AU1550: name = "Au1550"; break;
- case CPU_AU1200: name = "Au1200"; break;
- case CPU_AU1210: name = "Au1210"; break;
- case CPU_AU1250: name = "Au1250"; break;
- case CPU_4KEC: name = "MIPS 4KEc"; break;
- case CPU_4KSC: name = "MIPS 4KSc"; break;
- case CPU_VR41XX: name = "NEC Vr41xx"; break;
- case CPU_R5500: name = "R5500"; break;
- case CPU_TX49XX: name = "TX49xx"; break;
- case CPU_20KC: name = "MIPS 20Kc"; break;
- case CPU_24K: name = "MIPS 24K"; break;
- case CPU_25KF: name = "MIPS 25Kf"; break;
- case CPU_34K: name = "MIPS 34K"; break;
- case CPU_1004K: name = "MIPS 1004K"; break;
- case CPU_74K: name = "MIPS 74K"; break;
- case CPU_VR4111: name = "NEC VR4111"; break;
- case CPU_VR4121: name = "NEC VR4121"; break;
- case CPU_VR4122: name = "NEC VR4122"; break;
- case CPU_VR4131: name = "NEC VR4131"; break;
- case CPU_VR4133: name = "NEC VR4133"; break;
- case CPU_VR4181: name = "NEC VR4181"; break;
- case CPU_VR4181A: name = "NEC VR4181A"; break;
- case CPU_SR71000: name = "Sandcraft SR71000"; break;
- case CPU_BCM3302: name = "Broadcom BCM3302"; break;
- case CPU_BCM4710: name = "Broadcom BCM4710"; break;
- case CPU_PR4450: name = "Philips PR4450"; break;
- case CPU_LOONGSON2: name = "ICT Loongson-2"; break;
- default:
- BUG();
- }
-
- return name;
-}
-
__cpuinit void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
c->processor_id = read_c0_prid();
switch (c->processor_id & 0xff0000) {
case PRID_COMP_LEGACY:
- cpu_probe_legacy(c);
+ cpu_probe_legacy(c, cpu);
break;
case PRID_COMP_MIPS:
- cpu_probe_mips(c);
+ cpu_probe_mips(c, cpu);
break;
case PRID_COMP_ALCHEMY:
- cpu_probe_alchemy(c);
+ cpu_probe_alchemy(c, cpu);
break;
case PRID_COMP_SIBYTE:
- cpu_probe_sibyte(c);
+ cpu_probe_sibyte(c, cpu);
break;
case PRID_COMP_BROADCOM:
- cpu_probe_broadcom(c);
+ cpu_probe_broadcom(c, cpu);
break;
case PRID_COMP_SANDCRAFT:
- cpu_probe_sandcraft(c);
+ cpu_probe_sandcraft(c, cpu);
break;
case PRID_COMP_NXP:
- cpu_probe_nxp(c);
+ cpu_probe_nxp(c, cpu);
break;
- default:
- c->cputype = CPU_UNKNOWN;
}
+ BUG_ON(!__cpu_name[cpu]);
+ BUG_ON(c->cputype == CPU_UNKNOWN);
+
/*
* Platform code can force the cpu type to optimize code
* generation. In that case be sure the cpu type is correctly
}
}
- __cpu_name[cpu] = cpu_to_name(c);
-
if (cpu_has_mips_r2)
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
else
/* preload SMP state for boot cpu */
void __devinit smp_prepare_boot_cpu(void)
{
- /*
- * This assumes that bootup is always handled by the processor
- * with the logic and physical number 0.
- */
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
cpu_set(0, phys_cpu_present_map);
cpu_set(0, cpu_online_map);
cpu_set(0, cpu_callin_map);
#include <asm/cpu.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/module.h>
die_if_kernel("Kernel bug detected", regs);
force_sig(SIGTRAP, current);
break;
+ case BRK_MEMU:
+ /*
+ * Address errors may be deliberately induced by the FPU
+ * emulator to retake control of the CPU after executing the
+ * instruction in the delay slot of an emulated branch.
+ *
+ * Terminate if exception was recognized as a delay slot return
+ * otherwise handle as normal.
+ */
+ if (do_dsemulret(regs))
+ return;
+
+ die_if_kernel("Math emu break/trap", regs);
+ force_sig(SIGTRAP, current);
+ break;
default:
scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
die_if_kernel(b, regs);
#ifdef CONFIG_64BIT
unsigned long uncached_ebase = TO_UNCAC(ebase);
#endif
+ if (cpu_has_mips_r2)
+ ebase += (read_c0_ebase() & 0x3ffff000);
if (!addr)
panic(panic_null_cerr);
if (cpu_has_veic || cpu_has_vint)
ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
- else
+ else {
ebase = CAC_BASE;
+ if (cpu_has_mips_r2)
+ ebase += (read_c0_ebase() & 0x3ffff000);
+ }
per_cpu_trap_init();
if (cpu_has_vce)
/* Special exception: R4[04]00 uses also the divec space. */
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
+ memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100);
else if (cpu_has_4kex)
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80);
else
- memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
+ memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80);
signal_init();
#ifdef CONFIG_MIPS32_COMPAT
asmlinkage void do_ade(struct pt_regs *regs)
{
- extern int do_dsemulret(struct pt_regs *);
unsigned int __user *pc;
mm_segment_t seg;
- /*
- * Address errors may be deliberately induced by the FPU emulator to
- * retake control of the CPU after executing the instruction in the
- * delay slot of an emulated branch.
- */
- /* Terminate if exception was recognized as a delay slot return */
- if (do_dsemulret(regs))
- return;
-
- /* Otherwise handle as normal */
-
/*
* Did we catch a fault trying to load an instruction?
* Or are we running in MIPS16 mode?
#include <asm/branch.h>
#include "ieee754.h"
-#include "dsemul.h"
/* Strap kernel emulator for full MIPS IV emulation */
/* cop control register rd -> gpr[rt] */
u32 value;
- if (ir == CP1UNDEF) {
- return do_dsemulret(xcp);
- }
if (MIPSInst_RD(ir) == FPCREG_CSR) {
value = ctx->fcr31;
value = (value & ~0x3) | mips_rm[value & 0x3];
#include <asm/fpu_emulator.h>
#include "ieee754.h"
-#include "dsemul.h"
/* Strap kernel emulator for full MIPS IV emulation */
return SIGBUS;
err = __put_user(ir, &fr->emul);
- err |= __put_user((mips_instruction)BADINST, &fr->badinst);
+ err |= __put_user((mips_instruction)BREAK_MATH, &fr->badinst);
err |= __put_user((mips_instruction)BD_COOKIE, &fr->cookie);
err |= __put_user(cpc, &fr->epc);
/*
* Do some sanity checking on the stackframe:
*
- * - Is the instruction pointed to by the EPC an BADINST?
+ * - Is the instruction pointed to by the EPC an BREAK_MATH?
* - Is the following memory word the BD_COOKIE?
*/
err = __get_user(insn, &fr->badinst);
err |= __get_user(cookie, &fr->cookie);
- if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
+ if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) {
fpuemustats.errors++;
return 0;
}
+++ /dev/null
-extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc);
-extern int do_dsemulret(struct pt_regs *xcp);
-
-/* Instruction which will always cause an address error */
-#define AdELOAD 0x8c000001 /* lw $0,1($0) */
-/* Instruction which will plainly cause a CP1 exception when FPU is disabled */
-#define CP1UNDEF 0x44400001 /* cfc1 $0,$0 undef */
-
-/* Instruction inserted following the badinst to further tag the sequence */
-#define BD_COOKIE 0x0000bd36 /* tne $0,$0 with baggage */
-
-/* Setup which instruction to use for trampoline */
-#ifdef STANDALONE_EMULATOR
-#define BADINST CP1UNDEF
-#else
-#define BADINST AdELOAD
-#endif
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
/* TX4927-SIO DTR on (PIO[15]) */
gpio_request(15, "sio-dtr");
gpio_direction_output(15, 1);
- gpio_request(0, "led");
- gpio_direction_output(0, 1);
- gpio_request(1, "led");
- gpio_direction_output(1, 1);
tx4927_sio_init(0, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
tx4927_mtd_init(i);
}
+static void __init rbtx4927_gpioled_init(void)
+{
+ static struct gpio_led leds[] = {
+ { .name = "gpioled:green:0", .gpio = 0, .active_low = 1, },
+ { .name = "gpioled:green:1", .gpio = 1, .active_low = 1, },
+ };
+ static struct gpio_led_platform_data pdata = {
+ .num_leds = ARRAY_SIZE(leds),
+ .leds = leds,
+ };
+ struct platform_device *pdev = platform_device_alloc("leds-gpio", 0);
+
+ if (!pdev)
+ return;
+ pdev->dev.platform_data = &pdata;
+ if (platform_device_add(pdev))
+ platform_device_put(pdev);
+}
+
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
tx4927_wdt_init();
rbtx4927_mtd_init();
txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL);
+ rbtx4927_gpioled_init();
}
struct txx9_board_vec rbtx4927_vec __initdata = {
#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
int i, j;
unsigned char ethaddr[2][6];
+ u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;
+
for (i = 0; i < 2; i++) {
unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10);
- if (readb(rbtx4939_bdipsw_addr) & 8) {
+ if (bdipsw == 0)
+ memcpy(ethaddr[i], (void *)area, 6);
+ else {
u16 buf[3];
- area -= 0x03000000;
+ if (bdipsw & 8)
+ area -= 0x03000000;
+ else
+ area -= 0x01000000;
for (j = 0; j < 3; j++)
buf[j] = le16_to_cpup((u16 *)(area + j * 2));
memcpy(ethaddr[i], buf, 6);
- } else
- memcpy(ethaddr[i], (void *)area, 6);
+ }
}
tx4939_ethaddr_init(ethaddr[0], ethaddr[1]);
#endif
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Usage: addnote [-r realbase] zImage [note.elf]
- *
- * If note.elf is supplied, it is the name of an ELF file that contains
- * an RPA note to use instead of the built-in one. Alternatively, the
- * note.elf file may be empty, in which case the built-in RPA note is
- * used (this is to simplify how this is invoked from the wrapper script).
+ * Usage: addnote zImage
*/
#include <stdio.h>
#include <stdlib.h>
*/
#define N_RPA_DESCR 8
unsigned int rpanote[N_RPA_DESCR] = {
- 1, /* lparaffinity */
- 128, /* min_rmo_size */
+ 0, /* lparaffinity */
+ 64, /* min_rmo_size */
0, /* min_rmo_percent */
- 46, /* max_pft_size */
+ 40, /* max_pft_size */
1, /* splpar */
-1, /* min_load */
- 1, /* new_mem_def */
- 0, /* ignore_my_client_config */
+ 0, /* new_mem_def */
+ 1, /* ignore_my_client_config */
};
#define ROUNDUP(len) (((len) + 3) & ~3)
unsigned char buf[512];
-unsigned char notebuf[512];
-#define GET_16BE(b, off) (((b)[off] << 8) + ((b)[(off)+1]))
-#define GET_32BE(b, off) ((GET_16BE((b), (off)) << 16) + \
- GET_16BE((b), (off)+2))
+#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1]))
+#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2))
-#define PUT_16BE(b, off, v) ((b)[off] = ((v) >> 8) & 0xff, \
- (b)[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(b, off, v) (PUT_16BE((b), (off), (v) >> 16), \
- PUT_16BE((b), (off) + 2, (v)))
+#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \
+ buf[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \
+ PUT_16BE((off) + 2, (v)))
/* Structure of an ELF file */
#define E_IDENT 0 /* ELF header */
unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
-unsigned char *read_rpanote(const char *fname, int *nnp)
-{
- int notefd, nr, i;
- int ph, ps, np;
- int note, notesize;
-
- notefd = open(fname, O_RDONLY);
- if (notefd < 0) {
- perror(fname);
- exit(1);
- }
- nr = read(notefd, notebuf, sizeof(notebuf));
- if (nr < 0) {
- perror("read note");
- exit(1);
- }
- if (nr == 0) /* empty file */
- return NULL;
- if (nr < E_HSIZE ||
- memcmp(¬ebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 ||
- notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 ||
- notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB)
- goto notelf;
- close(notefd);
-
- /* now look for the RPA-note */
- ph = GET_32BE(notebuf, E_PHOFF);
- ps = GET_16BE(notebuf, E_PHENTSIZE);
- np = GET_16BE(notebuf, E_PHNUM);
- if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
- goto notelf;
-
- for (i = 0; i < np; ++i, ph += ps) {
- if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE)
- continue;
- note = GET_32BE(notebuf, ph + PH_OFFSET);
- notesize = GET_32BE(notebuf, ph + PH_FILESZ);
- if (notesize < 34 || note + notesize > nr)
- continue;
- if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 ||
- GET_32BE(notebuf, note + 8) != 0x12759999 ||
- strcmp((char *)¬ebuf[note + 12], rpaname) != 0)
- continue;
- /* looks like an RPA note, return it */
- *nnp = notesize;
- return ¬ebuf[note];
- }
- /* no RPA note found */
- return NULL;
-
- notelf:
- fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname);
- exit(1);
-}
-
int
main(int ac, char **av)
{
- int fd, n, i, ai;
+ int fd, n, i;
int ph, ps, np;
int nnote, nnote2, ns;
- unsigned char *rpap;
- char *p, *endp;
-
- ai = 1;
- if (ac >= ai + 2 && strcmp(av[ai], "-r") == 0) {
- /* process -r realbase */
- p = av[ai + 1];
- descr[1] = strtol(p, &endp, 16);
- if (endp == p || *endp != 0) {
- fprintf(stderr, "Can't parse -r argument '%s' as hex\n",
- p);
- exit(1);
- }
- ai += 2;
- }
- if (ac != ai + 1 && ac != ai + 2) {
- fprintf(stderr, "Usage: %s [-r realbase] elf-file [rpanote.elf]\n", av[0]);
+
+ if (ac != 2) {
+ fprintf(stderr, "Usage: %s elf-file\n", av[0]);
exit(1);
}
- fd = open(av[ai], O_RDWR);
+ fd = open(av[1], O_RDWR);
if (fd < 0) {
- perror(av[ai]);
+ perror(av[1]);
exit(1);
}
nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr);
nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote);
- rpap = NULL;
n = read(fd, buf, sizeof(buf));
if (n < 0) {
if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
|| buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
- av[ai]);
+ av[1]);
exit(1);
}
- if (ac == ai + 2)
- rpap = read_rpanote(av[ai + 1], &nnote2);
-
- ph = GET_32BE(buf, E_PHOFF);
- ps = GET_16BE(buf, E_PHENTSIZE);
- np = GET_16BE(buf, E_PHNUM);
+ ph = GET_32BE(E_PHOFF);
+ ps = GET_16BE(E_PHENTSIZE);
+ np = GET_16BE(E_PHNUM);
if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
goto notelf;
if (ph + (np + 2) * ps + nnote + nnote2 > n)
goto nospace;
for (i = 0; i < np; ++i) {
- if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
+ if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
fprintf(stderr, "%s already has a note entry\n",
- av[ai]);
+ av[1]);
exit(0);
}
ph += ps;
/* fill in the program header entry */
ns = ph + 2 * ps;
- PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
- PUT_32BE(buf, ph + PH_OFFSET, ns);
- PUT_32BE(buf, ph + PH_FILESZ, nnote);
+ PUT_32BE(ph + PH_TYPE, PT_NOTE);
+ PUT_32BE(ph + PH_OFFSET, ns);
+ PUT_32BE(ph + PH_FILESZ, nnote);
/* fill in the note area we point to */
/* XXX we should probably make this a proper section */
- PUT_32BE(buf, ns, strlen(arch) + 1);
- PUT_32BE(buf, ns + 4, N_DESCR * 4);
- PUT_32BE(buf, ns + 8, 0x1275);
+ PUT_32BE(ns, strlen(arch) + 1);
+ PUT_32BE(ns + 4, N_DESCR * 4);
+ PUT_32BE(ns + 8, 0x1275);
strcpy((char *) &buf[ns + 12], arch);
ns += 12 + strlen(arch) + 1;
for (i = 0; i < N_DESCR; ++i, ns += 4)
- PUT_32BE(buf, ns, descr[i]);
+ PUT_32BE(ns, descr[i]);
/* fill in the second program header entry and the RPA note area */
ph += ps;
- PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
- PUT_32BE(buf, ph + PH_OFFSET, ns);
- PUT_32BE(buf, ph + PH_FILESZ, nnote2);
+ PUT_32BE(ph + PH_TYPE, PT_NOTE);
+ PUT_32BE(ph + PH_OFFSET, ns);
+ PUT_32BE(ph + PH_FILESZ, nnote2);
/* fill in the note area we point to */
- if (rpap) {
- /* RPA note supplied in file, just copy the whole thing over */
- memcpy(buf + ns, rpap, nnote2);
- } else {
- PUT_32BE(buf, ns, strlen(rpaname) + 1);
- PUT_32BE(buf, ns + 4, sizeof(rpanote));
- PUT_32BE(buf, ns + 8, 0x12759999);
- strcpy((char *) &buf[ns + 12], rpaname);
- ns += 12 + ROUNDUP(strlen(rpaname) + 1);
- for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
- PUT_32BE(buf, ns, rpanote[i]);
- }
+ PUT_32BE(ns, strlen(rpaname) + 1);
+ PUT_32BE(ns + 4, sizeof(rpanote));
+ PUT_32BE(ns + 8, 0x12759999);
+ strcpy((char *) &buf[ns + 12], rpaname);
+ ns += 12 + ROUNDUP(strlen(rpaname) + 1);
+ for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
+ PUT_32BE(ns, rpanote[i]);
/* Update the number of program headers */
- PUT_16BE(buf, E_PHNUM, np + 2);
+ PUT_16BE(E_PHNUM, np + 2);
/* write back */
lseek(fd, (long) 0, SEEK_SET);
exit(1);
}
if (i < n) {
- fprintf(stderr, "%s: write truncated\n", av[ai]);
+ fprintf(stderr, "%s: write truncated\n", av[1]);
exit(1);
}
exit(0);
notelf:
- fprintf(stderr, "%s does not appear to be an ELF file\n", av[ai]);
+ fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]);
exit(1);
nospace:
fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
- av[ai]);
+ av[1]);
exit(1);
}
mode = "cpu";
};
- dma@82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a8>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
- reg = <0x180 0x28>;
- cell-index = <3>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- };
-
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
FDT_CHECK_HEADER(fdt);
- for (depth = 0;
- offset >= 0;
+ for (depth = 0, offset = fdt_next_node(fdt, offset, &depth);
+ (offset >= 0) && (depth > 0);
offset = fdt_next_node(fdt, offset, &depth)) {
if (depth < 0)
return -FDT_ERR_NOTFOUND;
return offset;
}
- return offset; /* error */
+ if (offset < 0)
+ return offset; /* error */
+ else
+ return -FDT_ERR_NOTFOUND;
}
int fdt_subnode_offset(const void *fdt, int parentoffset,
*/
if ((unsigned long)_start < ei.loadsize)
fatal("Insufficient memory for kernel at address 0!"
- " (_start=%p, uncomressed size=%08x)\n\r",
+ " (_start=%p, uncompressed size=%08lx)\n\r",
_start, ei.loadsize);
if ((unsigned long)_end < ei.memsize)
# post-processing needed for some platforms
case "$platform" in
-pseries)
- ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
- $objbin/addnote "$ofile" "$ofile".rpanote
- rm -r "$ofile".rpanote
- ;;
-chrp)
- $objbin/addnote -r c00000 "$ofile"
+pseries|chrp)
+ $objbin/addnote "$ofile"
;;
coff)
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Mon Oct 13 13:47:16 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:49:18 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_ACADIA=y
# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 19:34:03 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:49:20 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_ACADIA is not set
CONFIG_EP405=y
+# CONFIG_HCU4 is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_PPC40x_SIMPLE is not set
CONFIG_405GP=y
CONFIG_IBM405_ERR77=y
CONFIG_IBM405_ERR51=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.5
-# Tue Sep 16 00:44:33 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:49:22 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
-# CONFIG_LOGBUFFER is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# Platform support
#
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
CONFIG_HCU4=y
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_405GPR=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 19:36:14 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:49:23 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
CONFIG_KILAUEA=y
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_PPC40x_SIMPLE is not set
CONFIG_405EX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_IBM_NEW_EMAC_RGMII=y
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 19:38:39 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:49:25 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
# CONFIG_KILAUEA is not set
CONFIG_MAKALU=y
# CONFIG_WALNUT is not set
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_PPC40x_SIMPLE is not set
CONFIG_405EX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_IBM_NEW_EMAC_RGMII=y
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 19:40:56 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:49:27 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
CONFIG_WALNUT=y
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_PPC40x_SIMPLE is not set
CONFIG_405GP=y
CONFIG_IBM405_ERR77=y
CONFIG_IBM405_ERR51=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Oct 1 15:54:57 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:04 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_460EX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 08:43:44 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:06 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440EP=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 08:46:14 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:08 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
CONFIG_CANYONLANDS=y
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_460EX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:04:12 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:09 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440GP=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:06:51 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:11 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
CONFIG_KATMAI=y
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440SPe=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:09:35 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:13 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
CONFIG_RAINIER=y
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440GRX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:12:48 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:15 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440EP=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# Input device support
#
CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_IRQSTACKS is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:15:13 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:16 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440EPX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_IBM_NEW_EMAC_RGMII=y
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:17:48 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:18 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440GX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:23:39 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:16:22 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
CONFIG_WARP=y
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_440EP=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:05 2008
+# Linux kernel version: 2.6.27
+# Fri Oct 24 00:42:39 2008
#
# CONFIG_PPC64 is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 12:34:33 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 08:56:44 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_PPC4xx_GPIO=y
CONFIG_XILINX_VIRTEX=y
+CONFIG_ACADIA=y
CONFIG_EP405=y
+CONFIG_HCU4=y
CONFIG_KILAUEA=y
CONFIG_MAKALU=y
CONFIG_WALNUT=y
CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+CONFIG_PPC40x_SIMPLE=y
CONFIG_405GP=y
CONFIG_405EX=y
+CONFIG_405EZ=y
+CONFIG_405GPR=y
CONFIG_XILINX_VIRTEX_II_PRO=y
CONFIG_XILINX_VIRTEX_4_FX=y
CONFIG_IBM405_ERR77=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_IBM_NEW_EMAC_RGMII=y
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
+CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y
+CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
+CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+CONFIG_I2C_GPIO=m
CONFIG_I2C_IBM_IIC=m
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 10:01:31 2008
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 09:28:58 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
CONFIG_KATMAI=y
CONFIG_RAINIER=y
CONFIG_WARP=y
+CONFIG_ARCHES=y
CONFIG_CANYONLANDS=y
+CONFIG_GLACIER=y
CONFIG_YOSEMITE=y
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+CONFIG_PPC44x_SIMPLE=y
+CONFIG_PPC4xx_GPIO=y
CONFIG_440EP=y
CONFIG_440EPX=y
CONFIG_440GRX=y
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+CONFIG_I2C_GPIO=m
CONFIG_I2C_IBM_IIC=m
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
-CONFIG_FS_MBCACHE=y
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_KVM_BOOKE_HOST=y
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
unsigned long mask, gfp_t flag, int node);
extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
void *vaddr, dma_addr_t dma_handle);
-extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
- void *vaddr, size_t size, unsigned long mask,
- enum dma_data_direction direction,
- struct dma_attrs *attrs);
-extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction,
- struct dma_attrs *attrs);
+extern dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
+ struct page *page, unsigned long offset,
+ size_t size, unsigned long mask,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs);
+extern void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs);
extern void iommu_init_early_pSeries(void);
extern void iommu_init_early_iSeries(void);
* Reserve to the end of the FWNMI area, see head_64.S */
#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */
-/*
- * Used to differentiate between relocatable kdump kernel and other
- * kernels
- */
-#define KDUMP_SIGNATURE 0xfeed1234
-
#ifdef CONFIG_CRASH_DUMP
#define KDUMP_TRAMPOLINE_START 0x0100
#ifndef __ASSEMBLY__
-extern unsigned long __kdump_flag;
-
#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE)
extern void reserve_kdump_trampoline(void);
extern void setup_kdump_trampoline(void);
#define MPIC_NO_BIAS 0x00000400
/* Ignore NIRQS as reported by FRR */
#define MPIC_BROKEN_FRR_NIRQS 0x00000800
+/* Destination only supports a single CPU at a time */
+#define MPIC_SINGLE_DEST_CPU 0x00001000
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
extern void pcibios_claim_one_bus(struct pci_bus *b);
+extern void pcibios_allocate_bus_resources(struct pci_bus *bus);
+
extern void pcibios_resource_survey(void);
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
}
/* Creates TCEs for a user provided buffer. The user buffer must be
- * contiguous real kernel storage (not vmalloc). The address of the buffer
- * passed here is the kernel (virtual) address of the buffer. The buffer
- * need not be page aligned, the dma_addr_t returned will point to the same
- * byte within the page as vaddr.
+ * contiguous real kernel storage (not vmalloc). The address passed here
+ * comprises a page address and offset into that page. The dma_addr_t
+ * returned will point to the same byte within the page as was passed in.
*/
-static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
- return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
- device_to_mask(dev), direction, attrs);
+ return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size,
+ device_to_mask(dev), direction, attrs);
}
-static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
- iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
- attrs);
+ iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction,
+ attrs);
}
struct dma_mapping_ops dma_iommu_ops = {
.alloc_coherent = dma_iommu_alloc_coherent,
.free_coherent = dma_iommu_free_coherent,
- .map_single = dma_iommu_map_single,
- .unmap_single = dma_iommu_unmap_single,
.map_sg = dma_iommu_map_sg,
.unmap_sg = dma_iommu_unmap_sg,
.dma_supported = dma_iommu_dma_supported,
+ .map_page = dma_iommu_map_page,
+ .unmap_page = dma_iommu_unmap_page,
};
EXPORT_SYMBOL(dma_iommu_ops);
__secondary_hold_acknowledge:
.llong 0x0
- /* This flag is set by purgatory if we should be a kdump kernel. */
- /* Do not move this variable as purgatory knows about it. */
- .globl __kdump_flag
-__kdump_flag:
- .llong 0x0
-
#ifdef CONFIG_PPC_ISERIES
/*
* At offset 0x20, there is a pointer to iSeries LPAR data.
.llong hvReleaseData-KERNELBASE
#endif /* CONFIG_PPC_ISERIES */
+#ifdef CONFIG_CRASH_DUMP
+ /* This flag is set to 1 by a loader if the kernel should run
+ * at the loaded address instead of the linked address. This
+ * is used by kexec-tools to keep the the kdump kernel in the
+ * crash_kernel region. The loader is responsible for
+ * observing the alignment requirement.
+ */
+ /* Do not move this variable as kexec-tools knows about it. */
+ . = 0x5c
+ .globl __run_at_load
+__run_at_load:
+ .long 0x72756e30 /* "run0" -- relocate to 0 by default */
+#endif
+
. = 0x60
/*
* The following code is used to hold secondary processors
lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
sldi r25,r25,32
#ifdef CONFIG_CRASH_DUMP
- ld r7,__kdump_flag-_stext(r26)
- cmpldi cr0,r7,1 /* kdump kernel ? - stay where we are */
+ lwz r7,__run_at_load-_stext(r26)
+ cmplwi cr0,r7,1 /* kdump kernel ? - stay where we are */
bne 1f
add r25,r25,r26
#endif
#ifdef CONFIG_CRASH_DUMP
/*
* Check if the kernel has to be running as relocatable kernel based on the
- * variable __kdump_flag, if it is set the kernel is treated as relocatable
+ * variable __run_at_load, if it is set the kernel is treated as relocatable
* kernel, otherwise it will be moved to PHYSICAL_START
*/
- ld r7,__kdump_flag-_stext(r26)
- cmpldi cr0,r7,1
+ lwz r7,__run_at_load-_stext(r26)
+ cmplwi cr0,r7,1
bne 3f
li r5,__end_interrupts - _stext /* just copy interrupts */
kfree(vaddr);
}
-static dma_addr_t ibmebus_map_single(struct device *dev,
- void *ptr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static dma_addr_t ibmebus_map_page(struct device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
- return (dma_addr_t)(ptr);
+ return (dma_addr_t)(page_address(page) + offset);
}
-static void ibmebus_unmap_single(struct device *dev,
- dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static void ibmebus_unmap_page(struct device *dev,
+ dma_addr_t dma_addr,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
return;
}
static struct dma_mapping_ops ibmebus_dma_ops = {
.alloc_coherent = ibmebus_alloc_coherent,
.free_coherent = ibmebus_free_coherent,
- .map_single = ibmebus_map_single,
- .unmap_single = ibmebus_unmap_single,
.map_sg = ibmebus_map_sg,
.unmap_sg = ibmebus_unmap_sg,
.dma_supported = ibmebus_dma_supported,
+ .map_page = ibmebus_map_page,
+ .unmap_page = ibmebus_unmap_page,
};
static int ibmebus_match_path(struct device *dev, void *data)
#include <linux/dma-mapping.h>
#include <linux/bitops.h>
#include <linux/iommu-helper.h>
+#include <linux/crash_dump.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
static void iommu_table_clear(struct iommu_table *tbl)
{
- if (!__kdump_flag) {
+ if (!is_kdump_kernel()) {
/* Clear the table in case firmware left allocations in it */
ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
return;
}
/* Creates TCEs for a user provided buffer. The user buffer must be
- * contiguous real kernel storage (not vmalloc). The address of the buffer
- * passed here is the kernel (virtual) address of the buffer. The buffer
- * need not be page aligned, the dma_addr_t returned will point to the same
- * byte within the page as vaddr.
+ * contiguous real kernel storage (not vmalloc). The address passed here
+ * comprises a page address and offset into that page. The dma_addr_t
+ * returned will point to the same byte within the page as was passed in.
*/
-dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
- void *vaddr, size_t size, unsigned long mask,
- enum dma_data_direction direction, struct dma_attrs *attrs)
+dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
+ struct page *page, unsigned long offset, size_t size,
+ unsigned long mask, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
dma_addr_t dma_handle = DMA_ERROR_CODE;
+ void *vaddr;
unsigned long uaddr;
unsigned int npages, align;
BUG_ON(direction == DMA_NONE);
+ vaddr = page_address(page) + offset;
uaddr = (unsigned long)vaddr;
npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE);
return dma_handle;
}
-void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction,
- struct dma_attrs *attrs)
+void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
unsigned int npages;
/* Our assembly helper, in kexec_stub.S */
extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
void *image, void *control,
- void (*clear_all)(void),
- unsigned long kdump_flag) ATTRIB_NORET;
+ void (*clear_all)(void)) ATTRIB_NORET;
/* too late to fail here */
void default_machine_kexec(struct kimage *image)
{
- unsigned long kdump_flag = 0;
-
/* prepare control code if any */
/*
if (crashing_cpu == -1)
kexec_prepare_cpus();
- else
- kdump_flag = KDUMP_SIGNATURE;
/* switch to a staticly allocated stack. Based on irq stack code.
* XXX: the task struct will likely be invalid once we do the copy!
*/
kexec_sequence(&kexec_stack, image->start, image,
page_address(image->control_code_page),
- ppc_md.hpte_clear_all, kdump_flag);
+ ppc_md.hpte_clear_all);
/* NOTREACHED */
}
/*
- * kexec_sequence(newstack, start, image, control, clear_all(), kdump_flag)
+ * kexec_sequence(newstack, start, image, control, clear_all())
*
* does the grungy work with stack switching and real mode switches
* also does simple calls to other code
- *
- * kdump_flag says whether the next kernel should be a kdump kernel.
*/
_GLOBAL(kexec_sequence)
mr r29,r5 /* image (virt) */
mr r28,r6 /* control, unused */
mr r27,r7 /* clear_all() fn desc */
- mr r26,r8 /* kdump flag */
+ mr r26,r8 /* spare */
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
/* disable interrupts, we are overwriting kernel data next */
mr r4,r30 # start, aka phys mem offset
mtlr 4
li r5,0
- mr r6,r26 /* kdump_flag */
- blr /* image->start(physid, image->start, 0, kdump_flag); */
+ blr /* image->start(physid, image->start, 0); */
#endif /* CONFIG_KEXEC */
dev->dev.parent = parent;
dev->dev.release = of_release_dev;
dev->dev.archdata.of_node = np;
- set_dev_node(&dev->dev, of_node_to_nid(np));
if (bus_id)
strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
* as well.
*/
-static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+void pcibios_allocate_bus_resources(struct pci_bus *bus)
{
- struct pci_bus *bus;
+ struct pci_bus *b;
int i;
struct resource *res, *pr;
- /* Depth-First Search on bus tree */
- list_for_each_entry(bus, bus_list, node) {
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
- if ((res = bus->resource[i]) == NULL || !res->flags
- || res->start > res->end)
- continue;
- if (bus->parent == NULL)
- pr = (res->flags & IORESOURCE_IO) ?
- &ioport_resource : &iomem_resource;
- else {
- /* Don't bother with non-root busses when
- * re-assigning all resources. We clear the
- * resource flags as if they were colliding
- * and as such ensure proper re-allocation
- * later.
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ if ((res = bus->resource[i]) == NULL || !res->flags
+ || res->start > res->end)
+ continue;
+ if (bus->parent == NULL)
+ pr = (res->flags & IORESOURCE_IO) ?
+ &ioport_resource : &iomem_resource;
+ else {
+ /* Don't bother with non-root busses when
+ * re-assigning all resources. We clear the
+ * resource flags as if they were colliding
+ * and as such ensure proper re-allocation
+ * later.
+ */
+ if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)
+ goto clear_resource;
+ pr = pci_find_parent_resource(bus->self, res);
+ if (pr == res) {
+ /* this happens when the generic PCI
+ * code (wrongly) decides that this
+ * bridge is transparent -- paulus
*/
- if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)
- goto clear_resource;
- pr = pci_find_parent_resource(bus->self, res);
- if (pr == res) {
- /* this happens when the generic PCI
- * code (wrongly) decides that this
- * bridge is transparent -- paulus
- */
- continue;
- }
+ continue;
}
+ }
- DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
- "[0x%x], parent %p (%s)\n",
- bus->self ? pci_name(bus->self) : "PHB",
- bus->number, i,
- (unsigned long long)res->start,
- (unsigned long long)res->end,
- (unsigned int)res->flags,
- pr, (pr && pr->name) ? pr->name : "nil");
-
- if (pr && !(pr->flags & IORESOURCE_UNSET)) {
- if (request_resource(pr, res) == 0)
- continue;
- /*
- * Must be a conflict with an existing entry.
- * Move that entry (or entries) under the
- * bridge resource and try again.
- */
- if (reparent_resources(pr, res) == 0)
- continue;
- }
- printk(KERN_WARNING
- "PCI: Cannot allocate resource region "
- "%d of PCI bridge %d, will remap\n",
- i, bus->number);
-clear_resource:
- res->flags = 0;
+ DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+ "[0x%x], parent %p (%s)\n",
+ bus->self ? pci_name(bus->self) : "PHB",
+ bus->number, i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags,
+ pr, (pr && pr->name) ? pr->name : "nil");
+
+ if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+ if (request_resource(pr, res) == 0)
+ continue;
+ /*
+ * Must be a conflict with an existing entry.
+ * Move that entry (or entries) under the
+ * bridge resource and try again.
+ */
+ if (reparent_resources(pr, res) == 0)
+ continue;
}
- pcibios_allocate_bus_resources(&bus->children);
+ printk(KERN_WARNING "PCI: Cannot allocate resource region "
+ "%d of PCI bridge %d, will remap\n", i, bus->number);
+clear_resource:
+ res->flags = 0;
}
+
+ list_for_each_entry(b, &bus->children, node)
+ pcibios_allocate_bus_resources(b);
}
static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
void __init pcibios_resource_survey(void)
{
+ struct pci_bus *b;
+
/* Allocate and assign resources. If we re-assign everything, then
* we skip the allocate phase
*/
- pcibios_allocate_bus_resources(&pci_root_buses);
+ list_for_each_entry(b, &pci_root_buses, node)
+ pcibios_allocate_bus_resources(b);
if (!(ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)) {
pcibios_allocate_resources(0);
pci_name(bus->self));
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
- res->end - res->start + 1);
+ res->end + _IO_BASE + 1);
return 0;
}
u32 ignore_me;
} rpadesc;
} rpanote;
-} fake_elf __section(.fakeelf) = {
+} fake_elf = {
.elfhdr = {
.e_ident = { 0x7f, 'E', 'L', 'F',
ELFCLASS32, ELFDATA2MSB, EV_CURRENT },
.type = 0x12759999,
.name = "IBM,RPA-Client-Config",
.rpadesc = {
- .lpar_affinity = 1,
- .min_rmo_size = 128, /* in megabytes */
+ .lpar_affinity = 0,
+ .min_rmo_size = 64, /* in megabytes */
.min_rmo_percent = 0,
- .max_pft_size = 46, /* 2^46 bytes max PFT size */
+ .max_pft_size = 48, /* 2^48 bytes max PFT size */
.splpar = 1,
.min_load = ~0U,
- .new_mem_def = 1
+ .new_mem_def = 0
}
}
};
if (htab_address)
printk("htab_address = 0x%p\n", htab_address);
printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
-#if PHYSICAL_START > 0
- printk("physical_start = 0x%lx\n", PHYSICAL_START);
-#endif
+ if (PHYSICAL_START > 0)
+ printk("physical_start = 0x%lx\n",
+ PHYSICAL_START);
printk("-----------------------------------------------------\n");
DBG(" <- setup_system()\n");
* altivec/spe instructions at some point.
*/
static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
- int sigret)
+ int sigret, int ctx_has_vsx_region)
{
unsigned long msr = regs->msr;
* the saved MSR value to indicate that frame->mc_vregs
* contains valid data
*/
- if (current->thread.used_vsr) {
+ if (current->thread.used_vsr && ctx_has_vsx_region) {
__giveup_vsx(current);
if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
frame = &rt_sf->uc.uc_mcontext;
addr = frame;
if (vdso32_rt_sigtramp && current->mm->context.vdso_base) {
- if (save_user_regs(regs, frame, 0))
+ if (save_user_regs(regs, frame, 0, 1))
goto badframe;
regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp;
} else {
- if (save_user_regs(regs, frame, __NR_rt_sigreturn))
+ if (save_user_regs(regs, frame, __NR_rt_sigreturn, 1))
goto badframe;
regs->link = (unsigned long) frame->tramp;
}
int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
{
unsigned char tmp;
+ int ctx_has_vsx_region = 0;
#ifdef CONFIG_PPC64
unsigned long new_msr = 0;
if (new_ctx &&
- __get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
+ get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
return -EFAULT;
/*
* Check that the context is not smaller than the original
if ((ctx_size < sizeof(struct ucontext)) &&
(new_msr & MSR_VSX))
return -EINVAL;
-#ifdef CONFIG_VSX
- /*
- * If userspace doesn't provide enough room for VSX data,
- * but current thread has used VSX, we don't have anywhere
- * to store the full context back into.
- */
- if ((ctx_size < sizeof(struct ucontext)) &&
- (current->thread.used_vsr && old_ctx))
- return -EINVAL;
-#endif
+ /* Does the context have enough room to store VSX data? */
+ if (ctx_size >= sizeof(struct ucontext))
+ ctx_has_vsx_region = 1;
#else
/* Context size is for future use. Right now, we only make sure
* we are passed something we understand
*/
mctx = (struct mcontext __user *)
((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
- if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
- || save_user_regs(regs, mctx, 0)
+ if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
+ || save_user_regs(regs, mctx, 0, ctx_has_vsx_region)
|| put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked)
|| __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
return -EFAULT;
}
if (new_ctx == NULL)
return 0;
- if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
+ if (!access_ok(VERIFY_READ, new_ctx, ctx_size)
|| __get_user(tmp, (u8 __user *) new_ctx)
- || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
+ || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1))
return -EFAULT;
/*
goto badframe;
if (vdso32_sigtramp && current->mm->context.vdso_base) {
- if (save_user_regs(regs, &frame->mctx, 0))
+ if (save_user_regs(regs, &frame->mctx, 0, 1))
goto badframe;
regs->link = current->mm->context.vdso_base + vdso32_sigtramp;
} else {
- if (save_user_regs(regs, &frame->mctx, __NR_sigreturn))
+ if (save_user_regs(regs, &frame->mctx, __NR_sigreturn, 1))
goto badframe;
regs->link = (unsigned long) frame->mctx.tramp;
}
*/
static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- int signr, sigset_t *set, unsigned long handler)
+ int signr, sigset_t *set, unsigned long handler,
+ int ctx_has_vsx_region)
{
/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
* process never used altivec yet (MSR_VEC is zero in pt_regs of
* then out to userspace. Update v_regs to point after the
* VMX data.
*/
- if (current->thread.used_vsr) {
+ if (current->thread.used_vsr && ctx_has_vsx_region) {
__giveup_vsx(current);
v_regs += ELF_NVRREG;
err |= copy_vsx_to_user(v_regs, current);
unsigned char tmp;
sigset_t set;
unsigned long new_msr = 0;
+ int ctx_has_vsx_region = 0;
if (new_ctx &&
- __get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
+ get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
return -EFAULT;
/*
* Check that the context is not smaller than the original
if ((ctx_size < sizeof(struct ucontext)) &&
(new_msr & MSR_VSX))
return -EINVAL;
-#ifdef CONFIG_VSX
- /*
- * If userspace doesn't provide enough room for VSX data,
- * but current thread has used VSX, we don't have anywhere
- * to store the full context back into.
- */
- if ((ctx_size < sizeof(struct ucontext)) &&
- (current->thread.used_vsr && old_ctx))
- return -EINVAL;
-#endif
+ /* Does the context have enough room to store VSX data? */
+ if (ctx_size >= sizeof(struct ucontext))
+ ctx_has_vsx_region = 1;
+
if (old_ctx != NULL) {
- if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
- || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0)
+ if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
+ || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0,
+ ctx_has_vsx_region)
|| __copy_to_user(&old_ctx->uc_sigmask,
¤t->blocked, sizeof(sigset_t)))
return -EFAULT;
}
if (new_ctx == NULL)
return 0;
- if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
+ if (!access_ok(VERIFY_READ, new_ctx, ctx_size)
|| __get_user(tmp, (u8 __user *) new_ctx)
- || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
+ || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1))
return -EFAULT;
/*
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL,
- (unsigned long)ka->sa.sa_handler);
+ (unsigned long)ka->sa.sa_handler, 1);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto badframe;
vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
}
-static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct vio_dev *viodev = to_vio_dev(dev);
dma_addr_t ret = DMA_ERROR_CODE;
return ret;
}
- ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+ ret = dma_iommu_ops.map_page(dev, page, offset, size, direction, attrs);
if (unlikely(dma_mapping_error(dev, ret))) {
vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
atomic_inc(&viodev->cmo.allocs_failed);
return ret;
}
-static void vio_dma_iommu_unmap_single(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct vio_dev *viodev = to_vio_dev(dev);
- dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+ dma_iommu_ops.unmap_page(dev, dma_handle, size, direction, attrs);
vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
}
struct dma_mapping_ops vio_dma_mapping_ops = {
.alloc_coherent = vio_dma_iommu_alloc_coherent,
.free_coherent = vio_dma_iommu_free_coherent,
- .map_single = vio_dma_iommu_map_single,
- .unmap_single = vio_dma_iommu_unmap_single,
.map_sg = vio_dma_iommu_map_sg,
.unmap_sg = vio_dma_iommu_unmap_sg,
+ .map_page = vio_dma_iommu_map_page,
+ .unmap_page = vio_dma_iommu_unmap_page,
+
};
/**
*(.machine.desc)
__machine_desc_end = . ;
}
+#ifdef CONFIG_RELOCATABLE
. = ALIGN(8);
.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
__rela_dyn_start = .;
*(.rela*)
}
-
- /* Fake ELF header containing RPA note; for addnote */
- .fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) }
+#endif
/* freed after init ends here */
. = ALIGN(PAGE_SIZE);
num_counters = num_ctrs;
+ if (unlikely(num_ctrs > NR_PHYS_CTRS)) {
+ printk(KERN_ERR
+ "%s: Oprofile, number of specified events " \
+ "exceeds number of physical counters\n",
+ __func__);
+ return -EIO;
+ }
pm_regs.group_control = 0;
pm_regs.debug_bus_control = 0;
static int pm_rtas_activate_spu_profiling(u32 node)
{
int ret, i;
- struct pm_signal pm_signal_local[NR_PHYS_CTRS];
+ struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE];
/*
* Set up the rtas call to configure the debug bus to
* route the SPU PCs. Setup the pm_signal for each SPU
*/
- for (i = 0; i < NUM_SPUS_PER_NODE; i++) {
+ for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) {
pm_signal_local[i].cpu = node;
pm_signal_local[i].signal_group = 41;
/* spu i on word (i/2) */
ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE,
PASSTHRU_ENABLE, pm_signal_local,
- (NUM_SPUS_PER_NODE
+ (ARRAY_SIZE(pm_signal_local)
* sizeof(struct pm_signal)));
if (unlikely(ret)) {
config HCU4
bool "Hcu4"
depends on 40x
- default y
+ default n
select 405GPR
help
This option enables support for the Nestal Maschinen HCU4 board.
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+ MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
mpic = mpic_alloc(np, res.start,
MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+ MPIC_SINGLE_DEST_CPU,
0, 256, " MPIC ");
of_node_put(np);
BUG_ON(mpic == NULL);
dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle);
}
-static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static dma_addr_t dma_fixed_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
- return dma_direct_ops.map_single(dev, ptr, size, direction,
- attrs);
+ return dma_direct_ops.map_page(dev, page, offset, size,
+ direction, attrs);
else
- return iommu_map_single(dev, cell_get_iommu_table(dev), ptr,
- size, device_to_mask(dev), direction,
- attrs);
+ return iommu_map_page(dev, cell_get_iommu_table(dev), page,
+ offset, size, device_to_mask(dev),
+ direction, attrs);
}
-static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static void dma_fixed_unmap_page(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
- dma_direct_ops.unmap_single(dev, dma_addr, size, direction,
- attrs);
+ dma_direct_ops.unmap_page(dev, dma_addr, size, direction,
+ attrs);
else
- iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size,
- direction, attrs);
+ iommu_unmap_page(cell_get_iommu_table(dev), dma_addr, size,
+ direction, attrs);
}
static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
struct dma_mapping_ops dma_iommu_fixed_ops = {
.alloc_coherent = dma_fixed_alloc_coherent,
.free_coherent = dma_fixed_free_coherent,
- .map_single = dma_fixed_map_single,
- .unmap_single = dma_fixed_unmap_single,
.map_sg = dma_fixed_map_sg,
.unmap_sg = dma_fixed_unmap_sg,
.dma_supported = dma_fixed_dma_supported,
.set_dma_mask = dma_set_mask_and_switch,
+ .map_page = dma_fixed_map_page,
+ .unmap_page = dma_fixed_unmap_page,
};
static void cell_dma_dev_setup_fixed(struct device *dev);
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/reboot.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
#include <asm/reg.h>
#include <asm/io.h>
#include <asm/prom.h>
-#include <asm/kexec.h>
#include <asm/machdep.h>
#include <asm/rtas.h>
#include <asm/cell-regs.h>
-#include <asm/kdump.h>
#include "ras.h"
int ret = -ENOMEM;
unsigned long addr;
- if (__kdump_flag)
+ if (is_kdump_kernel())
rtas_call(ptcal_stop_tok, 1, 1, NULL, nid);
area = kmalloc(sizeof(*area), GFP_KERNEL);
#include <linux/kernel.h>
#include <linux/initrd.h>
#include <linux/mtd/physmap.h>
+#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/prom.h>
},
};
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .type = "soc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+machine_device_initcall(linkstation, declare_of_platform_devices);
+
static int __init linkstation_add_bridge(struct device_node *dev)
{
#ifdef CONFIG_PCI
dma_addr_t iseries_hv_map(void *vaddr, size_t size,
enum dma_data_direction direction)
{
- return iommu_map_single(NULL, &vio_iommu_table, vaddr, size,
- DMA_32BIT_MASK, direction, NULL);
+ return iommu_map_page(NULL, &vio_iommu_table, virt_to_page(vaddr),
+ (unsigned long)vaddr % PAGE_SIZE, size,
+ DMA_32BIT_MASK, direction, NULL);
}
void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
- iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction, NULL);
+ iommu_unmap_page(&vio_iommu_table, dma_handle, size, direction, NULL);
}
void __init iommu_vio_init(void)
}
/* Creates TCEs for a user provided buffer. The user buffer must be
- * contiguous real kernel storage (not vmalloc). The address of the buffer
- * passed here is the kernel (virtual) address of the buffer. The buffer
- * need not be page aligned, the dma_addr_t returned will point to the same
- * byte within the page as vaddr.
+ * contiguous real kernel storage (not vmalloc). The address passed here
+ * comprises a page address and offset into that page. The dma_addr_t
+ * returned will point to the same byte within the page as was passed in.
*/
-static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
- enum dma_data_direction direction, struct dma_attrs *attrs)
+static dma_addr_t ps3_sb_map_page(struct device *_dev, struct page *page,
+ unsigned long offset, size_t size, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
int result;
unsigned long bus_addr;
+ void *ptr = page_address(page) + offset;
result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
&bus_addr,
return bus_addr;
}
-static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
+static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
int result;
unsigned long bus_addr;
u64 iopte_flag;
+ void *ptr = page_address(page) + offset;
iopte_flag = IOPTE_M;
switch (direction) {
return bus_addr;
}
-static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
+static void ps3_unmap_page(struct device *_dev, dma_addr_t dma_addr,
size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
{
struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
static struct dma_mapping_ops ps3_sb_dma_ops = {
.alloc_coherent = ps3_alloc_coherent,
.free_coherent = ps3_free_coherent,
- .map_single = ps3_sb_map_single,
- .unmap_single = ps3_unmap_single,
.map_sg = ps3_sb_map_sg,
.unmap_sg = ps3_sb_unmap_sg,
- .dma_supported = ps3_dma_supported
+ .dma_supported = ps3_dma_supported,
+ .map_page = ps3_sb_map_page,
+ .unmap_page = ps3_unmap_page,
};
static struct dma_mapping_ops ps3_ioc0_dma_ops = {
.alloc_coherent = ps3_alloc_coherent,
.free_coherent = ps3_free_coherent,
- .map_single = ps3_ioc0_map_single,
- .unmap_single = ps3_unmap_single,
.map_sg = ps3_ioc0_map_sg,
.unmap_sg = ps3_ioc0_unmap_sg,
- .dma_supported = ps3_dma_supported
+ .dma_supported = ps3_dma_supported,
+ .map_page = ps3_ioc0_map_page,
+ .unmap_page = ps3_unmap_page,
};
/**
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/crash_dump.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/tce.h>
#include <asm/ppc-pci.h>
#include <asm/udbg.h>
-#include <asm/kdump.h>
#include "plpar_wrappers.h"
tbl->it_base = (unsigned long)__va(*basep);
- if (!__kdump_flag)
+ if (!is_kdump_kernel())
memset((void *)tbl->it_base, 0, *sizep);
tbl->it_busno = phb->bus->number;
{
struct pci_controller *phb;
int primary;
+ struct pci_bus *b;
primary = list_empty(&hose_list);
phb = pcibios_alloc_controller(dn);
eeh_add_device_tree_early(dn);
scan_phb(phb);
+ pcibios_allocate_bus_resources(phb->bus);
pcibios_fixup_new_pci_devices(phb->bus);
pci_bus_add_devices(phb->bus);
eeh_add_device_tree_late(phb->bus);
if (ret)
return ret;
+ /* The gianfar device will try to use the same ID created below to find
+ * this bus, to coordinate register access (since they share). */
mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
res.start&0xfffff, &res, 1);
if (IS_ERR(mdio_dev))
of_node_put(mdio);
}
+ /* Get MDIO bus controlled by this eTSEC, if any. Normally only
+ * eTSEC 1 will control an MDIO bus, not necessarily the same
+ * bus that its PHY is on ('mdio' above), so we can't just use
+ * that. What we do is look for a gianfar mdio device that has
+ * overlapping registers with this device. That's really the
+ * whole point, to find the device sharing our registers to
+ * coordinate access with it.
+ */
+ for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
+ if (of_address_to_resource(mdio, 0, &res))
+ continue;
+
+ if (res.start >= r[0].start && res.end <= r[0].end) {
+ /* Get the ID the mdio bus platform device was
+ * registered with. gfar_data.bus_id is
+ * different because it's for finding a PHY,
+ * while this is for finding a MII bus.
+ */
+ gfar_data.mdio_bus = res.start&0xfffff;
+ of_node_put(mdio);
+ break;
+ }
+ }
+
ret =
platform_device_add_data(gfar_dev, &gfar_data,
sizeof(struct
#endif /* CONFIG_MPIC_U3_HT_IRQS */
+#ifdef CONFIG_SMP
+static int irq_choose_cpu(unsigned int virt_irq)
+{
+ cpumask_t mask = irq_desc[virt_irq].affinity;
+ int cpuid;
+
+ if (cpus_equal(mask, CPU_MASK_ALL)) {
+ static int irq_rover;
+ static DEFINE_SPINLOCK(irq_rover_lock);
+ unsigned long flags;
+
+ /* Round-robin distribution... */
+ do_round_robin:
+ spin_lock_irqsave(&irq_rover_lock, flags);
+
+ while (!cpu_online(irq_rover)) {
+ if (++irq_rover >= NR_CPUS)
+ irq_rover = 0;
+ }
+ cpuid = irq_rover;
+ do {
+ if (++irq_rover >= NR_CPUS)
+ irq_rover = 0;
+ } while (!cpu_online(irq_rover));
+
+ spin_unlock_irqrestore(&irq_rover_lock, flags);
+ } else {
+ cpumask_t tmp;
+
+ cpus_and(tmp, cpu_online_map, mask);
+
+ if (cpus_empty(tmp))
+ goto do_round_robin;
+
+ cpuid = first_cpu(tmp);
+ }
+
+ return cpuid;
+}
+#else
+static int irq_choose_cpu(unsigned int virt_irq)
+{
+ return hard_smp_processor_id();
+}
+#endif
#define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
- cpumask_t tmp;
+ if (mpic->flags & MPIC_SINGLE_DEST_CPU) {
+ int cpuid = irq_choose_cpu(irq);
- cpus_and(tmp, cpumask, cpu_online_map);
+ mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
+ } else {
+ cpumask_t tmp;
- mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
- mpic_physmask(cpus_addr(tmp)[0]));
+ cpus_and(tmp, cpumask, cpu_online_map);
+
+ mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
+ mpic_physmask(cpus_addr(tmp)[0]));
+ }
}
static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
static void print_bug_trap(struct pt_regs *regs)
{
+#ifdef CONFIG_BUG
const struct bug_entry *bug;
unsigned long addr;
#else
printf("kernel BUG at %p!\n", (void *)bug->bug_addr);
#endif
+#endif /* CONFIG_BUG */
}
static void excprint(struct pt_regs *fp)
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
- select HAVE_FTRACE
+ select HAVE_FUNCTION_TRACER
config SUPERH64
def_bool y if CPU_SH5
# arch/sh/Makefile
#
# Copyright (C) 1999 Kaz Kojima
-# Copyright (C) 2002, 2003, 2004 Paul Mundt
+# Copyright (C) 2002 - 2008 Paul Mundt
# Copyright (C) 2002 M. R. Brown
#
# This file is subject to the terms and conditions of the GNU General Public
isa-$(CONFIG_CPU_SH4A) := sh4a
isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
isa-$(CONFIG_CPU_SH5) := shmedia
-isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
-ifndef CONFIG_SH_DSP
-ifndef CONFIG_SH_FPU
-isa-y := $(isa-y)-nofpu
-endif
+ifeq ($(CONFIG_SUPERH32),y)
+isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
+isa-y := $(isa-y)-up
endif
-isa-y := $(isa-y)-up
-
cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
$(call cc-option,-m2a-nofpu,)
$(call cc-option,-m4a-nofpu,)
cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,)
+ifeq ($(cflags-y),)
+#
+# In the case where we are stuck with a compiler that has been uselessly
+# restricted to a particular ISA, a favourite default of newer GCCs when
+# extensive multilib targets are not provided, ensure we get the best fit
+# regarding FP generation. This is necessary to avoid references to FP
+# variants in libgcc where integer variants exist, which otherwise result
+# in link errors. This is intentionally stupid (albeit many orders of
+# magnitude less than GCC's default behaviour), as anything with a large
+# number of multilib targets better have been built correctly for
+# the target in mind.
+#
+cflags-y += $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
+ grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
+endif
+
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
-R .stab -R .stabstr -S
# Give the various platforms the opportunity to set default image types
-defaultimage-$(CONFIG_SUPERH32) := zImage
+defaultimage-$(CONFIG_SUPERH32) := zImage
+defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
# Set some sensible Kbuild defaults
KBUILD_DEFCONFIG := shx3_defconfig
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-ifeq ($(CONFIG_FTRACE),y)
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
Say Y if you want support for the HD64461.
Otherwise, say N.
-config HD64465
- bool "Hitachi HD64465 companion chip support"
- ---help---
- The Hitachi HD64465 provides an interface for
- the SH7750 CPU, supporting a LCD controller,
- CRT color controller, IrDA, USB, PCMCIA,
- keyboard controller, and a printer interface.
-
- More information is available at
- <http://global.hitachi.com/New/cnews/E/1998/981019B.html>.
-
- Say Y if you want support for the HD64465.
- Otherwise, say N.
-
endchoice
# These will also be split into the Kconfig's below
via the HD64461 companion chip.
Otherwise, say N.
-config HD64465_IOBASE
- hex "HD64465 start address"
- depends on HD64465
- default "0xb0000000"
- help
- The default setting of the HD64465 IO base address is 0xb0000000.
-
- Do not change this unless you know what you are doing.
-
-config HD64465_IRQ
- int "HD64465 IRQ"
- depends on HD64465
- default "5"
- help
- The default setting of the HD64465 IRQ is 5.
-
- Do not change this unless you know what you are doing.
-
endmenu
-
obj-$(CONFIG_HD64461) += hd64461.o
-obj-$(CONFIG_HD64465) += hd64465/
EXTRA_CFLAGS += -Werror
+++ /dev/null
-#
-# Makefile for the HD64465
-#
-
-obj-y := setup.o io.o gpio.o
-
+++ /dev/null
-/*
- * $Id: gpio.c,v 1.4 2003/05/19 22:24:18 lethal Exp $
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * GPIO pin support for HD64465 companion chip.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/hd64465/gpio.h>
-
-#define _PORTOF(portpin) (((portpin)>>3)&0x7)
-#define _PINOF(portpin) ((portpin)&0x7)
-
-/* Register addresses parametrised on port */
-#define GPIO_CR(port) (HD64465_REG_GPACR+((port)<<1))
-#define GPIO_DR(port) (HD64465_REG_GPADR+((port)<<1))
-#define GPIO_ICR(port) (HD64465_REG_GPAICR+((port)<<1))
-#define GPIO_ISR(port) (HD64465_REG_GPAISR+((port)<<1))
-
-#define GPIO_NPORTS 5
-
-#define MODNAME "hd64465_gpio"
-
-EXPORT_SYMBOL(hd64465_gpio_configure);
-EXPORT_SYMBOL(hd64465_gpio_get_pin);
-EXPORT_SYMBOL(hd64465_gpio_get_port);
-EXPORT_SYMBOL(hd64465_gpio_register_irq);
-EXPORT_SYMBOL(hd64465_gpio_set_pin);
-EXPORT_SYMBOL(hd64465_gpio_set_port);
-EXPORT_SYMBOL(hd64465_gpio_unregister_irq);
-
-/* TODO: each port should be protected with a spinlock */
-
-
-void hd64465_gpio_configure(int portpin, int direction)
-{
- unsigned short cr;
- unsigned int shift = (_PINOF(portpin)<<1);
-
- cr = inw(GPIO_CR(_PORTOF(portpin)));
- cr &= ~(3<<shift);
- cr |= direction<<shift;
- outw(cr, GPIO_CR(_PORTOF(portpin)));
-}
-
-void hd64465_gpio_set_pin(int portpin, unsigned int value)
-{
- unsigned short d;
- unsigned short mask = 1<<(_PINOF(portpin));
-
- d = inw(GPIO_DR(_PORTOF(portpin)));
- if (value)
- d |= mask;
- else
- d &= ~mask;
- outw(d, GPIO_DR(_PORTOF(portpin)));
-}
-
-unsigned int hd64465_gpio_get_pin(int portpin)
-{
- return inw(GPIO_DR(_PORTOF(portpin))) & (1<<(_PINOF(portpin)));
-}
-
-/* TODO: for cleaner atomicity semantics, add a mask to this routine */
-
-void hd64465_gpio_set_port(int port, unsigned int value)
-{
- outw(value, GPIO_DR(port));
-}
-
-unsigned int hd64465_gpio_get_port(int port)
-{
- return inw(GPIO_DR(port));
-}
-
-
-static struct {
- void (*func)(int portpin, void *dev);
- void *dev;
-} handlers[GPIO_NPORTS * 8];
-
-static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev)
-{
- unsigned short port, pin, isr, mask, portpin;
-
- for (port=0 ; port<GPIO_NPORTS ; port++) {
- isr = inw(GPIO_ISR(port));
-
- for (pin=0 ; pin<8 ; pin++) {
- mask = 1<<pin;
- if (isr & mask) {
- portpin = (port<<3)|pin;
- if (handlers[portpin].func != 0)
- handlers[portpin].func(portpin, handlers[portpin].dev);
- else
- printk(KERN_NOTICE "unexpected GPIO interrupt, pin %c%d\n",
- port+'A', (int)pin);
- }
- }
-
- /* Write 1s back to ISR to clear it? That's what the manual says.. */
- outw(isr, GPIO_ISR(port));
- }
-
- return IRQ_HANDLED;
-}
-
-void hd64465_gpio_register_irq(int portpin, int mode,
- void (*handler)(int portpin, void *dev), void *dev)
-{
- unsigned long flags;
- unsigned short icr, mask;
-
- if (handler == 0)
- return;
-
- local_irq_save(flags);
-
- handlers[portpin].func = handler;
- handlers[portpin].dev = dev;
-
- /*
- * Configure Interrupt Control Register
- */
- icr = inw(GPIO_ICR(_PORTOF(portpin)));
- mask = (1<<_PINOF(portpin));
-
- /* unmask interrupt */
- icr &= ~mask;
-
- /* set TS bit */
- mask <<= 8;
- icr &= ~mask;
- if (mode == HD64465_GPIO_RISING)
- icr |= mask;
-
- outw(icr, GPIO_ICR(_PORTOF(portpin)));
-
- local_irq_restore(flags);
-}
-
-void hd64465_gpio_unregister_irq(int portpin)
-{
- unsigned long flags;
- unsigned short icr;
-
- local_irq_save(flags);
-
- /*
- * Configure Interrupt Control Register
- */
- icr = inw(GPIO_ICR(_PORTOF(portpin)));
- icr |= (1<<_PINOF(portpin)); /* mask interrupt */
- outw(icr, GPIO_ICR(_PORTOF(portpin)));
-
- handlers[portpin].func = 0;
- handlers[portpin].dev = 0;
-
- local_irq_restore(flags);
-}
-
-static int __init hd64465_gpio_init(void)
-{
- if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME))
- return -EBUSY;
- if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt,
- IRQF_DISABLED, MODNAME, 0))
- goto out_irqfailed;
-
- printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO);
-
- return 0;
-
-out_irqfailed:
- release_region(HD64465_REG_GPACR, 0x1000);
-
- return -EINVAL;
-}
-
-static void __exit hd64465_gpio_exit(void)
-{
- release_region(HD64465_REG_GPACR, 0x1000);
- free_irq(HD64465_IRQ_GPIO, 0);
-}
-
-module_init(hd64465_gpio_init);
-module_exit(hd64465_gpio_exit);
-
-MODULE_LICENSE("GPL");
-
+++ /dev/null
-/*
- * $Id: io.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * Derived from io_hd64461.c, which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- *
- * Typical I/O routines for HD64465 system.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-
-
-#define HD64465_DEBUG 0
-
-#if HD64465_DEBUG
-#define DPRINTK(args...) printk(args)
-#define DIPRINTK(n, args...) if (hd64465_io_debug>(n)) printk(args)
-#else
-#define DPRINTK(args...)
-#define DIPRINTK(n, args...)
-#endif
-
-
-
-/* This is a hack suitable only for debugging IO port problems */
-int hd64465_io_debug;
-EXPORT_SYMBOL(hd64465_io_debug);
-
-/* Low iomap maps port 0-1K to addresses in 8byte chunks */
-#define HD64465_IOMAP_LO_THRESH 0x400
-#define HD64465_IOMAP_LO_SHIFT 3
-#define HD64465_IOMAP_LO_MASK ((1<<HD64465_IOMAP_LO_SHIFT)-1)
-#define HD64465_IOMAP_LO_NMAP (HD64465_IOMAP_LO_THRESH>>HD64465_IOMAP_LO_SHIFT)
-static unsigned long hd64465_iomap_lo[HD64465_IOMAP_LO_NMAP];
-static unsigned char hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP];
-
-/* High iomap maps port 1K-64K to addresses in 1K chunks */
-#define HD64465_IOMAP_HI_THRESH 0x10000
-#define HD64465_IOMAP_HI_SHIFT 10
-#define HD64465_IOMAP_HI_MASK ((1<<HD64465_IOMAP_HI_SHIFT)-1)
-#define HD64465_IOMAP_HI_NMAP (HD64465_IOMAP_HI_THRESH>>HD64465_IOMAP_HI_SHIFT)
-static unsigned long hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP];
-static unsigned char hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP];
-
-#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x))
-
-void hd64465_port_map(unsigned short baseport, unsigned int nports,
- unsigned long addr, unsigned char shift)
-{
- unsigned int port, endport = baseport + nports;
-
- DPRINTK("hd64465_port_map(base=0x%04hx, n=0x%04hx, addr=0x%08lx,endport=0x%04x)\n",
- baseport, nports, addr,endport);
-
- for (port = baseport ;
- port < endport && port < HD64465_IOMAP_LO_THRESH ;
- port += (1<<HD64465_IOMAP_LO_SHIFT)) {
- DPRINTK(" maplo[0x%x] = 0x%08lx\n", port, addr);
- hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = addr;
- hd64465_iomap_lo_shift[port>>HD64465_IOMAP_LO_SHIFT] = shift;
- addr += (1<<(HD64465_IOMAP_LO_SHIFT));
- }
-
- for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH);
- port < endport && port < HD64465_IOMAP_HI_THRESH ;
- port += (1<<HD64465_IOMAP_HI_SHIFT)) {
- DPRINTK(" maphi[0x%x] = 0x%08lx\n", port, addr);
- hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = addr;
- hd64465_iomap_hi_shift[port>>HD64465_IOMAP_HI_SHIFT] = shift;
- addr += (1<<(HD64465_IOMAP_HI_SHIFT));
- }
-}
-EXPORT_SYMBOL(hd64465_port_map);
-
-void hd64465_port_unmap(unsigned short baseport, unsigned int nports)
-{
- unsigned int port, endport = baseport + nports;
-
- DPRINTK("hd64465_port_unmap(base=0x%04hx, n=0x%04hx)\n",
- baseport, nports);
-
- for (port = baseport ;
- port < endport && port < HD64465_IOMAP_LO_THRESH ;
- port += (1<<HD64465_IOMAP_LO_SHIFT)) {
- hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = 0;
- }
-
- for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH);
- port < endport && port < HD64465_IOMAP_HI_THRESH ;
- port += (1<<HD64465_IOMAP_HI_SHIFT)) {
- hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = 0;
- }
-}
-EXPORT_SYMBOL(hd64465_port_unmap);
-
-unsigned long hd64465_isa_port2addr(unsigned long port)
-{
- unsigned long addr = 0;
- unsigned char shift;
-
- /* handle remapping of low IO ports */
- if (port < HD64465_IOMAP_LO_THRESH) {
- addr = hd64465_iomap_lo[port >> HD64465_IOMAP_LO_SHIFT];
- shift = hd64465_iomap_lo_shift[port >> HD64465_IOMAP_LO_SHIFT];
- if (addr != 0)
- addr += (port & HD64465_IOMAP_LO_MASK) << shift;
- else
- printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port);
- } else if (port < HD64465_IOMAP_HI_THRESH) {
- addr = hd64465_iomap_hi[port >> HD64465_IOMAP_HI_SHIFT];
- shift = hd64465_iomap_hi_shift[port >> HD64465_IOMAP_HI_SHIFT];
- if (addr != 0)
- addr += (port & HD64465_IOMAP_HI_MASK) << shift;
- else
- printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port);
- }
-
- /* HD64465 internal devices (0xb0000000) */
- else if (port < 0x20000)
- addr = CONFIG_HD64465_IOBASE + port - 0x10000;
-
- /* Whole physical address space (0xa0000000) */
- else
- addr = P2SEGADDR(port);
-
- DIPRINTK(2, "PORT2ADDR(0x%08lx) = 0x%08lx\n", port, addr);
-
- return addr;
-}
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
-unsigned char hd64465_inb(unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
- unsigned long b = (addr == 0 ? 0 : *(volatile unsigned char*)addr);
-
- DIPRINTK(0, "inb(%08lx) = %02x\n", addr, (unsigned)b);
- return b;
-}
-
-unsigned char hd64465_inb_p(unsigned long port)
-{
- unsigned long v;
- unsigned long addr = PORT2ADDR(port);
-
- v = (addr == 0 ? 0 : *(volatile unsigned char*)addr);
- delay();
- DIPRINTK(0, "inb_p(%08lx) = %02x\n", addr, (unsigned)v);
- return v;
-}
-
-unsigned short hd64465_inw(unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
- unsigned long b = (addr == 0 ? 0 : *(volatile unsigned short*)addr);
- DIPRINTK(0, "inw(%08lx) = %04lx\n", addr, b);
- return b;
-}
-
-unsigned int hd64465_inl(unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
- unsigned int b = (addr == 0 ? 0 : *(volatile unsigned long*)addr);
- DIPRINTK(0, "inl(%08lx) = %08x\n", addr, b);
- return b;
-}
-
-void hd64465_outb(unsigned char b, unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
-
- DIPRINTK(0, "outb(%02x, %08lx)\n", (unsigned)b, addr);
- if (addr != 0)
- *(volatile unsigned char*)addr = b;
-}
-
-void hd64465_outb_p(unsigned char b, unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
-
- DIPRINTK(0, "outb_p(%02x, %08lx)\n", (unsigned)b, addr);
- if (addr != 0)
- *(volatile unsigned char*)addr = b;
- delay();
-}
-
-void hd64465_outw(unsigned short b, unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
- DIPRINTK(0, "outw(%04x, %08lx)\n", (unsigned)b, addr);
- if (addr != 0)
- *(volatile unsigned short*)addr = b;
-}
-
-void hd64465_outl(unsigned int b, unsigned long port)
-{
- unsigned long addr = PORT2ADDR(port);
- DIPRINTK(0, "outl(%08x, %08lx)\n", b, addr);
- if (addr != 0)
- *(volatile unsigned long*)addr = b;
-}
-
+++ /dev/null
-/*
- * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
- *
- * Setup and IRQ handling code for the HD64465 companion chip.
- * by Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc
- *
- * Derived from setup_hd64461.c which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hd64465/hd64465.h>
-
-static void disable_hd64465_irq(unsigned int irq)
-{
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
-
- pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
- nimr = inw(HD64465_REG_NIMR);
- nimr |= mask;
- outw(nimr, HD64465_REG_NIMR);
-}
-
-static void enable_hd64465_irq(unsigned int irq)
-{
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
-
- pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
- nimr = inw(HD64465_REG_NIMR);
- nimr &= ~mask;
- outw(nimr, HD64465_REG_NIMR);
-}
-
-static void mask_and_ack_hd64465(unsigned int irq)
-{
- disable_hd64465_irq(irq);
-}
-
-static void end_hd64465_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_hd64465_irq(irq);
-}
-
-static unsigned int startup_hd64465_irq(unsigned int irq)
-{
- enable_hd64465_irq(irq);
- return 0;
-}
-
-static void shutdown_hd64465_irq(unsigned int irq)
-{
- disable_hd64465_irq(irq);
-}
-
-static struct hw_interrupt_type hd64465_irq_type = {
- .typename = "HD64465-IRQ",
- .startup = startup_hd64465_irq,
- .shutdown = shutdown_hd64465_irq,
- .enable = enable_hd64465_irq,
- .disable = disable_hd64465_irq,
- .ack = mask_and_ack_hd64465,
- .end = end_hd64465_irq,
-};
-
-static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
-{
- printk(KERN_INFO
- "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",
- inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR));
-
- return IRQ_NONE;
-}
-
-/*
- * Support for a secondary IRQ demux step. This is necessary
- * because the HD64465 presents a very thin interface to the
- * PCMCIA bus; a lot of features (such as remapping interrupts)
- * normally done in hardware by other PCMCIA host bridges is
- * instead done in software.
- */
-static struct {
- int (*func)(int, void *);
- void *dev;
-} hd64465_demux[HD64465_IRQ_NUM];
-
-void hd64465_register_irq_demux(int irq,
- int (*demux)(int irq, void *dev), void *dev)
-{
- hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
- hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
-}
-EXPORT_SYMBOL(hd64465_register_irq_demux);
-
-void hd64465_unregister_irq_demux(int irq)
-{
- hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
-}
-EXPORT_SYMBOL(hd64465_unregister_irq_demux);
-
-int hd64465_irq_demux(int irq)
-{
- if (irq == CONFIG_HD64465_IRQ) {
- unsigned short i, bit;
- unsigned short nirr = inw(HD64465_REG_NIRR);
- unsigned short nimr = inw(HD64465_REG_NIMR);
-
- pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
- nirr &= ~nimr;
- for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
- if (nirr & bit)
- break;
-
- if (i < HD64465_IRQ_NUM) {
- irq = HD64465_IRQ_BASE + i;
- if (hd64465_demux[i].func != 0)
- irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
- }
- }
- return irq;
-}
-
-static struct irqaction irq0 = {
- .handler = hd64465_interrupt,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "HD64465",
-};
-
-static int __init setup_hd64465(void)
-{
- int i;
- unsigned short rev;
- unsigned short smscr;
-
- if (!MACH_HD64465)
- return 0;
-
- printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n",
- CONFIG_HD64465_IOBASE,
- CONFIG_HD64465_IRQ,
- HD64465_IRQ_BASE,
- HD64465_IRQ_BASE+HD64465_IRQ_NUM-1);
-
- if (inw(HD64465_REG_SDID) != HD64465_SDID) {
- printk(KERN_ERR "HD64465 device ID not found, check base address\n");
- }
-
- rev = inw(HD64465_REG_SRR);
- printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
-
- outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */
-
- for (i = 0; i < HD64465_IRQ_NUM ; i++) {
- irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type;
- }
-
- setup_irq(CONFIG_HD64465_IRQ, &irq0);
-
- /* wake up the UART from STANDBY at this point */
- smscr = inw(HD64465_REG_SMSCR);
- outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);
-
- /* remap IO ports for first ISA serial port to HD64465 UART */
- hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
-
- return 0;
-}
-module_init(setup_hd64465);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:57:28 2008
+# Linux kernel version: 2.6.28-rc2
+# Fri Oct 31 15:58:06 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
# Bus options
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc2
+# Tue Oct 28 17:35:17 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SH4AL_DSP=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+CONFIG_CPU_SUBTYPE_SH7366=y
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x01f00000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=1
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=m
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#include <linux/compiler.h>
#include <linux/types.h>
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+#ifdef __LITTLE_ENDIAN__
+# define __LITTLE_ENDIAN
+#else
+# define __BIG_ENDIAN
+#endif
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
#ifdef __SH5__
return x;
}
+#define __arch_swab32 __arch_swab32
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
#ifdef __SH5__
return x;
}
+#define __arch_swab16 __arch_swab16
-static inline __u64 ___arch__swab64(__u64 val)
+static inline __u64 __arch_swab64(__u64 val)
{
union {
struct { __u32 a,b; } s;
__u64 u;
} v, w;
v.u = val;
- w.s.b = ___arch__swab32(v.s.a);
- w.s.a = ___arch__swab32(v.s.b);
+ w.s.b = __arch_swab32(v.s.a);
+ w.s.a = __arch_swab32(v.s.b);
return w.u;
}
+#define __arch_swab64 __arch_swab64
-#define __arch__swab64(x) ___arch__swab64(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __LITTLE_ENDIAN__
-#include <linux/byteorder/little_endian.h>
-#else
-#include <linux/byteorder/big_endian.h>
-#endif
+#include <linux/byteorder.h>
#endif /* __ASM_SH_BYTEORDER_H */
+++ /dev/null
-#ifndef _ASM_SH_HD64465_GPIO_
-#define _ASM_SH_HD64465_GPIO_ 1
-/*
- * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
- *
- * Hitachi HD64465 companion chip: General Purpose IO pins support.
- * This layer enables other device drivers to configure GPIO
- * pins, get and set their values, and register an interrupt
- * routine for when input pins change in hardware.
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- */
-#include <asm/hd64465.h>
-
-/* Macro to construct a portpin number (used in all
- * subsequent functions) from a port letter and a pin
- * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
- */
-#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin))
-
-/* Pin configuration constants for _configure() */
-#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */
-#define HD64465_GPIO_OUT 1 /* output */
-#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */
-#define HD64465_GPIO_IN 3 /* input */
-
-/* Configure a pin's direction */
-extern void hd64465_gpio_configure(int portpin, int direction);
-
-/* Get, set value */
-extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
-extern unsigned int hd64465_gpio_get_pin(int portpin);
-extern void hd64465_gpio_set_port(int port, unsigned int value);
-extern unsigned int hd64465_gpio_get_port(int port);
-
-/* mode constants for _register_irq() */
-#define HD64465_GPIO_FALLING 0
-#define HD64465_GPIO_RISING 1
-
-/* Interrupt on external value change */
-extern void hd64465_gpio_register_irq(int portpin, int mode,
- void (*handler)(int portpin, void *dev), void *dev);
-extern void hd64465_gpio_unregister_irq(int portpin);
-
-#endif /* _ASM_SH_HD64465_GPIO_ */
+++ /dev/null
-#ifndef _ASM_SH_HD64465_
-#define _ASM_SH_HD64465_ 1
-/*
- * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
- *
- * Hitachi HD64465 companion chip support
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- *
- * Derived from <asm/hd64461.h> which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- */
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/*
- * Note that registers are defined here as virtual port numbers,
- * which have no meaning except to get translated by hd64465_isa_port2addr()
- * to an address in the range 0xb0000000-0xb3ffffff. Note that
- * this translation happens to consist of adding the lower 16 bits
- * of the virtual port number to 0xb0000000. Note also that the manual
- * shows addresses as absolute physical addresses starting at 0x10000000,
- * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
- * manual, and accessed using address 0xb0005000 - Greg.
- */
-
-/* System registers */
-#define HD64465_REG_SRR 0x1000c /* System Revision Register */
-#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */
-#define HD64465_SDID 0x8122 /* 64465 device ID */
-
-/* Power Management registers */
-#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */
-#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */
-#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */
-#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */
-#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */
-#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */
-#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */
-#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */
-#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */
-#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */
-#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */
-#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */
-#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */
-
-/* Interrupt Controller registers */
-#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */
-#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */
-#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */
-
-/* Timer registers */
-#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */
-#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */
-#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */
-#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */
-#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */
-#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */
-#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */
-#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */
-#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */
-#define HD64465_TCR_PST_1 0x06 /* 1:1 */
-#define HD64465_TCR_PST_4 0x04 /* 1:4 */
-#define HD64465_TCR_PST_8 0x02 /* 1:8 */
-#define HD64465_TCR_PST_16 0x00 /* 1:16 */
-#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */
-#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */
-#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */
-#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */
-#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */
-#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */
-#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */
-#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */
-#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */
-
-/* Analog/Digital Converter registers */
-#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */
-#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */
-#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */
-#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */
-#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */
-#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */
-#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */
-#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */
-#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */
-#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */
-#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */
-#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */
-#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */
-#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */
-
-
-/* General Purpose I/O ports registers */
-#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */
-#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */
-#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */
-#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */
-#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */
-#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */
-#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */
-#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */
-#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */
-#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */
-#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */
-#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */
-#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */
-#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */
-#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */
-#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */
-#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */
-#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */
-#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */
-#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */
-
-/* PCMCIA bridge interface */
-#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */
-#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */
-#define HD64465_PCCISR_PIREQ 0x80
-#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */
-#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */
-#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */
-#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */
-#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */
-#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */
-#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */
-#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */
-#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */
-#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */
-#define HD64465_PCCGCR_PDRV 0x80 /* output drive */
-#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */
-#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */
-#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */
-#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */
-#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */
-#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */
-#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */
-#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */
-#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */
-#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */
-#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */
-#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */
-#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */
-#define HD64465_PCCCSCR_PRC 0x04 /* ready change */
-#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */
-#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */
-#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */
-#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */
-#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */
-#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */
-#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */
-#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */
-#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */
-#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */
-#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */
-#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */
-#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */
-#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/
-#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */
-#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */
-#define HD64465_PCCSCR_SWP 0x01 /* write protect */
-#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */
-#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */
-#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */
-#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */
-#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */
-#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */
-
-
-/* PS/2 Keyboard and mouse controller -- *not* register compatible */
-#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */
-#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */
-#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */
-#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */
-#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */
-#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */
-#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */
-#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */
-#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */
-#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */
-#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */
-#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */
-#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */
-#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */
-
-
-/*
- * Logical address at which the HD64465 is mapped. Note that this
- * should always be in the P2 segment (uncached and untranslated).
- */
-#ifndef CONFIG_HD64465_IOBASE
-#define CONFIG_HD64465_IOBASE 0xb0000000
-#endif
-/*
- * The HD64465 multiplexes all its modules' interrupts onto
- * this single interrupt.
- */
-#ifndef CONFIG_HD64465_IRQ
-#define CONFIG_HD64465_IRQ 5
-#endif
-
-
-#define _HD64465_IO_MASK 0xf8000000
-#define is_hd64465_addr(addr) \
- ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
-
-/*
- * A range of 16 virtual interrupts generated by
- * demuxing the HD64465 muxed interrupt.
- */
-#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE
-#define HD64465_IRQ_NUM 16
-#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0)
-#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1)
-#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2)
-#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3)
-/* bit 4 is reserved */
-#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5)
-#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6)
-#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7)
-#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8)
-#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9)
-#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10)
-#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11)
-#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12)
-#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13)
-#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14)
-#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15)
-
-/* Constants for PCMCIA mappings */
-#define HD64465_PCC_WINDOW 0x01000000
-
-#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */
-#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE)
-#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
-#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
-
-#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */
-#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE)
-#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
-#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
-
-/*
- * Base of USB controller interface (as memory)
- */
-#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000)
-#define HD64465_USB_LEN 0x1000
-/*
- * Base of embedded SRAM, used for USB controller.
- */
-#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000)
-#define HD64465_SRAM_LEN 0x1000
-
-
-
-#endif /* _ASM_SH_HD64465_ */
+++ /dev/null
-/*
- * include/asm-sh/hd64465/io.h
- *
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- *
- * Derived from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
- */
-
-#ifndef _ASM_SH_IO_HD64465_H
-#define _ASM_SH_IO_HD64465_H
-
-extern unsigned char hd64465_inb(unsigned long port);
-extern unsigned short hd64465_inw(unsigned long port);
-extern unsigned int hd64465_inl(unsigned long port);
-
-extern void hd64465_outb(unsigned char value, unsigned long port);
-extern void hd64465_outw(unsigned short value, unsigned long port);
-extern void hd64465_outl(unsigned int value, unsigned long port);
-
-extern unsigned char hd64465_inb_p(unsigned long port);
-extern void hd64465_outb_p(unsigned char value, unsigned long port);
-
-extern unsigned long hd64465_isa_port2addr(unsigned long offset);
-extern int hd64465_irq_demux(int irq);
-/* Provision for generic secondary demux step -- used by PCMCIA code */
-extern void hd64465_register_irq_demux(int irq,
- int (*demux)(int irq, void *dev), void *dev);
-extern void hd64465_unregister_irq_demux(int irq);
-/* Set this variable to 1 to see port traffic */
-extern int hd64465_io_debug;
-/* Map a range of ports to a range of kernel virtual memory.
- */
-extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
- unsigned long addr, unsigned char shift);
-extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
-
-#endif /* _ASM_SH_IO_HD64465_H */
#ifndef _ASM_SERIAL_H
#define _ASM_SERIAL_H
-#include <linux/kernel.h>
-
/*
* This assumes you have a 1.8432 MHz clock for your UART.
*
*/
#define BASE_BAUD ( 1843200 / 16 )
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#ifdef CONFIG_HD64465
-#include <asm/hd64465/hd64465.h>
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */
-
-#else
-
-#define SERIAL_PORT_DFNS
-
-#endif
-
#endif /* _ASM_SERIAL_H */
#ifndef __ASM_SH_CPU_SH4_RTC_H
#define __ASM_SH_CPU_SH4_RTC_H
-#ifdef CONFIG_CPU_SUBTYPE_SH7723
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
#define rtc_reg_size sizeof(u16)
#else
#define rtc_reg_size sizeof(u32)
.resource = iic_resources,
};
+static struct resource usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "r8a66597_hcd",
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usb_host_resources),
+ .resource = usb_host_resources,
+};
+
static struct uio_info vpu_platform_data = {
.name = "VPU5",
.version = "0",
static struct platform_device *sh7366_devices[] __initdata = {
&iic_device,
&sci_device,
+ &usb_host_device,
&vpu_device,
&veu0_device,
&veu1_device,
clk_always_enable("mstp022"); /* INTC */
clk_always_enable("mstp020"); /* SuperHyway */
clk_always_enable("mstp109"); /* I2C */
+ clk_always_enable("mstp211"); /* USB */
clk_always_enable("mstp207"); /* VEU-2 */
clk_always_enable("mstp202"); /* VEU-1 */
clk_always_enable("mstp201"); /* VPU */
/*
* SH7722 Setup
*
- * Copyright (C) 2006 - 2007 Paul Mundt
+ * Copyright (C) 2006 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <asm/clock.h>
#include <asm/mmzone.h>
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xa465fec0,
+ .end = 0xa465fec0 + 0x58 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = 45,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = 46,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = 44,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
static struct resource usbf_resources[] = {
[0] = {
.name = "m66592_udc",
};
static struct platform_device *sh7722_devices[] __initdata = {
+ &rtc_device,
&usbf_device,
&iic_device,
&sci_device,
IRDA, JPU, LCDC,
/* interrupt groups */
-
SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
};
7: .long do_syscall_trace_enter
8: .long do_syscall_trace_leave
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
.align 2
.globl _mcount
.type _mcount,@function
ftrace_stub:
rts
nop
-#endif /* CONFIG_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
-#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
+#define DECLARE_EXPORT(name) \
+ extern void name(void);EXPORT_SYMBOL(name)
+#define MAYBE_DECLARE_EXPORT(name) \
+ extern void name(void) __weak;EXPORT_SYMBOL(name)
/* These symbols are generated by the compiler itself */
DECLARE_EXPORT(__udivsi3);
* compiler which include backported patches.
*/
DECLARE_EXPORT(__udiv_qrnnd_16);
-#if !defined(CONFIG_CPU_SH2)
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udivsi3_i4i);
-#endif
+MAYBE_DECLARE_EXPORT(__sdivsi3_i4i);
+MAYBE_DECLARE_EXPORT(__udivsi3_i4i);
#endif
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
EXPORT_SYMBOL(clear_user_page);
#endif
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
EXPORT_SYMBOL(csum_partial);
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
ctrl_outl((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
back_to_cached();
local_irq_restore(flags);
/* I-cache invalidate */
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
ctrl_outl((v & CACHE_PHYSADDR_MASK),
- CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
#else
for (v = begin; v < end; v+=L1_CACHE_BYTES) {
ctrl_outl((v & CACHE_PHYSADDR_MASK),
- CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
ctrl_outl((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
}
#endif
back_to_cached();
return -ENODEV;
ops = &sh7750_perf_counter_ops;
- ops->cpu_type = (char *)get_cpu_subtype(¤t_cpu_data);
+ ops->cpu_type = "sh/sh7750";
- printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n",
- sh7750_perf_counter_ops.cpu_type);
+ printk(KERN_INFO "oprofile: using SH-4 performance monitoring.\n");
/* Clear the counters */
ctrl_outw(ctrl_inw(PMCR1) | PMCR_PMCLR, PMCR1);
void oprofile_arch_exit(void)
{
}
-
# List of companion chips / MFDs.
#
HD64461 HD64461
-HD64465 HD64465
#
# List of boards.
#include <asm/types.h>
#include <asm/asi.h>
-#ifdef __GNUC__
+#define __BIG_ENDIAN
#ifdef CONFIG_SPARC32
#define __SWAB_64_THRU_32__
#endif
#ifdef CONFIG_SPARC64
-
-static inline __u16 ___arch__swab16p(const __u16 *addr)
+static inline __u16 __arch_swab16p(const __u16 *addr)
{
__u16 ret;
: "r" (addr), "i" (ASI_PL));
return ret;
}
+#define __arch_swab16p __arch_swab16p
-static inline __u32 ___arch__swab32p(const __u32 *addr)
+static inline __u32 __arch_swab32p(const __u32 *addr)
{
__u32 ret;
: "r" (addr), "i" (ASI_PL));
return ret;
}
+#define __arch_swab32p __arch_swab32p
-static inline __u64 ___arch__swab64p(const __u64 *addr)
+static inline __u64 __arch_swab64p(const __u64 *addr)
{
__u64 ret;
: "r" (addr), "i" (ASI_PL));
return ret;
}
-
-#define __arch__swab16p(x) ___arch__swab16p(x)
-#define __arch__swab32p(x) ___arch__swab32p(x)
-#define __arch__swab64p(x) ___arch__swab64p(x)
+#define __arch_swab64p __arch_swab64p
#endif /* CONFIG_SPARC64 */
-#define __BYTEORDER_HAS_U64__
-
-#endif
-
-#include <linux/byteorder/big_endian.h>
+#include <linux/byteorder.h>
#endif /* _SPARC_BYTEORDER_H */
enum die_val {
DIE_UNUSED,
+ DIE_OOPS,
};
#endif /* !(__ASSEMBLY__) */
#define VPTE_SIZE (1 << (VA_BITS - PAGE_SHIFT + 3))
#endif
-#define TASK_SIZE ((unsigned long)-VPTE_SIZE)
#define TASK_SIZE_OF(tsk) \
(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
- (1UL << 32UL) : TASK_SIZE)
+ (1UL << 32UL) : ((unsigned long)-VPTE_SIZE))
+#define TASK_SIZE TASK_SIZE_OF(current)
#ifdef __KERNEL__
#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE)
#define strlen_user __strlen_user
#define strnlen_user __strnlen_user
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
+#define __copy_to_user_inatomic ___copy_to_user
+#define __copy_from_user_inatomic ___copy_from_user
#endif /* __ASSEMBLY__ */
{
struct platform_device *pdev = to_platform_device(dev);
struct m48t59_plat_data *pdata = pdev->dev.platform_data;
- void __iomem *regs = pdata->ioaddr;
- unsigned char val = readb(regs + ofs);
-
- /* the year 0 is 1968 */
- if (ofs == pdata->offset + M48T59_YEAR) {
- val += 0x68;
- if ((val & 0xf) > 9)
- val += 6;
- }
- return val;
+
+ return readb(pdata->ioaddr + ofs);
}
static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
{
struct platform_device *pdev = to_platform_device(dev);
struct m48t59_plat_data *pdata = pdev->dev.platform_data;
- void __iomem *regs = pdata->ioaddr;
-
- if (ofs == pdata->offset + M48T59_YEAR) {
- if (val < 0x68)
- val += 0x32;
- else
- val -= 0x68;
- if ((val & 0xf) > 9)
- val += 6;
- if ((val & 0xf0) > 0x9A)
- val += 0x60;
- }
- writeb(val, regs + ofs);
+
+ writeb(val, pdata->ioaddr + ofs);
}
static struct m48t59_plat_data m48t59_data = {
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
struct resource *rp = &pdev->resource[i];
+ resource_size_t aligned_end;
/* Active? */
if (!rp->flags)
continue;
}
+ /* Align the resource end to the next page address.
+ * PAGE_SIZE intentionally added instead of (PAGE_SIZE - 1),
+ * because actually we need the address of the next byte
+ * after rp->end.
+ */
+ aligned_end = (rp->end + PAGE_SIZE) & PAGE_MASK;
+
if ((rp->start <= user_paddr) &&
- (user_paddr + user_size) <= (rp->end + 1UL))
+ (user_paddr + user_size) <= aligned_end)
break;
}
.name = "rtc",
.compatible = "bq4802",
},
+ {},
};
static struct of_platform_driver bq4802_driver = {
static unsigned char mostek_read_byte(struct device *dev, u32 ofs)
{
struct platform_device *pdev = to_platform_device(dev);
- struct m48t59_plat_data *pdata = pdev->dev.platform_data;
- void __iomem *regs;
- unsigned char val;
-
- regs = (void __iomem *) pdev->resource[0].start;
- val = readb(regs + ofs);
-
- /* the year 0 is 1968 */
- if (ofs == pdata->offset + M48T59_YEAR) {
- val += 0x68;
- if ((val & 0xf) > 9)
- val += 6;
- }
- return val;
+ void __iomem *regs = (void __iomem *) pdev->resource[0].start;
+
+ return readb(regs + ofs);
}
static void mostek_write_byte(struct device *dev, u32 ofs, u8 val)
{
struct platform_device *pdev = to_platform_device(dev);
- struct m48t59_plat_data *pdata = pdev->dev.platform_data;
- void __iomem *regs;
-
- regs = (void __iomem *) pdev->resource[0].start;
- if (ofs == pdata->offset + M48T59_YEAR) {
- if (val < 0x68)
- val += 0x32;
- else
- val -= 0x68;
- if ((val & 0xf) > 9)
- val += 6;
- if ((val & 0xf0) > 0x9A)
- val += 0x60;
- }
+ void __iomem *regs = (void __iomem *) pdev->resource[0].start;
+
writeb(val, regs + ofs);
}
{
void __iomem *addr = (void __iomem *) __addr;
- if (count) {
- u16 *ps = (u16 *)src;
- u32 *pi;
-
- if (((u64)src) & 0x2) {
- u16 val = le16_to_cpup(ps);
- outw(val, addr);
- ps++;
- count--;
- }
- pi = (u32 *)ps;
- while (count >= 2) {
- u32 w = le32_to_cpup(pi);
-
- pi++;
- outw(w >> 0, addr);
- outw(w >> 16, addr);
- count -= 2;
- }
- ps = (u16 *)pi;
- if (count) {
- u16 val = le16_to_cpup(ps);
- outw(val, addr);
- }
+ while (count--) {
+ __raw_writew(*(u16 *)src, addr);
+ src += sizeof(u16);
}
}
void outsl(unsigned long __addr, const void *src, unsigned long count)
{
void __iomem *addr = (void __iomem *) __addr;
+ u32 l, l2;
- if (count) {
- if ((((u64)src) & 0x3) == 0) {
- u32 *p = (u32 *)src;
- while (count--) {
- u32 val = cpu_to_le32p(p);
- outl(val, addr);
- p++;
- }
- } else {
- u8 *pb;
- u16 *ps = (u16 *)src;
- u32 l = 0, l2;
- u32 *pi;
-
- switch (((u64)src) & 0x3) {
- case 0x2:
- count -= 1;
- l = cpu_to_le16p(ps) << 16;
- ps++;
- pi = (u32 *)ps;
- while (count--) {
- l2 = cpu_to_le32p(pi);
- pi++;
- outl(((l >> 16) | (l2 << 16)), addr);
- l = l2;
- }
- ps = (u16 *)pi;
- l2 = cpu_to_le16p(ps);
- outl(((l >> 16) | (l2 << 16)), addr);
- break;
-
- case 0x1:
- count -= 1;
- pb = (u8 *)src;
- l = (*pb++ << 8);
- ps = (u16 *)pb;
- l2 = cpu_to_le16p(ps);
- ps++;
- l |= (l2 << 16);
- pi = (u32 *)ps;
- while (count--) {
- l2 = cpu_to_le32p(pi);
- pi++;
- outl(((l >> 8) | (l2 << 24)), addr);
- l = l2;
- }
- pb = (u8 *)pi;
- outl(((l >> 8) | (*pb << 24)), addr);
- break;
+ if (!count)
+ return;
- case 0x3:
- count -= 1;
- pb = (u8 *)src;
- l = (*pb++ << 24);
- pi = (u32 *)pb;
- while (count--) {
- l2 = cpu_to_le32p(pi);
- pi++;
- outl(((l >> 24) | (l2 << 8)), addr);
- l = l2;
- }
- ps = (u16 *)pi;
- l2 = cpu_to_le16p(ps);
- ps++;
- pb = (u8 *)ps;
- l2 |= (*pb << 16);
- outl(((l >> 24) | (l2 << 8)), addr);
- break;
- }
+ switch (((unsigned long)src) & 0x3) {
+ case 0x0:
+ /* src is naturally aligned */
+ while (count--) {
+ __raw_writel(*(u32 *)src, addr);
+ src += sizeof(u32);
+ }
+ break;
+ case 0x2:
+ /* 2-byte alignment */
+ while (count--) {
+ l = (*(u16 *)src) << 16;
+ l |= *(u16 *)(src + sizeof(u16));
+ __raw_writel(l, addr);
+ src += sizeof(u32);
+ }
+ break;
+ case 0x1:
+ /* Hold three bytes in l each time, grab a byte from l2 */
+ l = (*(u8 *)src) << 24;
+ l |= (*(u16 *)(src + sizeof(u8))) << 8;
+ src += sizeof(u8) + sizeof(u16);
+ while (count--) {
+ l2 = *(u32 *)src;
+ l |= (l2 >> 24);
+ __raw_writel(l, addr);
+ l = l2 << 8;
+ src += sizeof(u32);
+ }
+ break;
+ case 0x3:
+ /* Hold a byte in l each time, grab 3 bytes from l2 */
+ l = (*(u8 *)src) << 24;
+ src += sizeof(u8);
+ while (count--) {
+ l2 = *(u32 *)src;
+ l |= (l2 >> 8);
+ __raw_writel(l, addr);
+ l = l2 << 24;
+ src += sizeof(u32);
}
+ break;
}
}
If you don't know what to do here, say N.
+config X86_HAS_BOOT_CPU_ID
+ def_bool y
+ depends on X86_VOYAGER
+
config X86_FIND_SMP_CONFIG
def_bool y
depends on X86_MPPARSE || X86_VOYAGER
endmenu
+config HAVE_ATOMIC_IOMAP
+ def_bool y
+ depends on X86_32
+
source "net/Kconfig"
source "drivers/Kconfig"
If unsure, say N.
config X86_DS
- bool "Debug Store support"
- default y
- help
- Add support for Debug Store.
- This allows the kernel to provide a memory buffer to the hardware
- to store various profiling and tracing events.
+ def_bool X86_PTRACE_BTS
+ depends on X86_DEBUGCTLMSR
config X86_PTRACE_BTS
- bool "ptrace interface to Branch Trace Store"
+ bool "Branch Trace Store"
default y
- depends on (X86_DS && X86_DEBUGCTLMSR)
+ depends on X86_DEBUGCTLMSR
help
- Add a ptrace interface to allow collecting an execution trace
- of the traced task.
- This collects control flow changes in a (cyclic) buffer and allows
- debuggers to fill in the gaps and show an execution trace of the debuggee.
+ This adds a ptrace interface to the hardware's branch trace store.
+
+ Debuggers may use it to collect an execution trace of the debugged
+ application in order to answer the question 'how did I get here?'.
+ Debuggers may trace user mode as well as kernel mode.
+
+ Say Y unless there is no application development on this machine
+ and you want to save a small amount of code size.
relocs
+vmlinux.bin.all
+vmlinux.relocs
#define X86_FEATURE_11AP (3*32+19) /* "" Bad local APIC aka 11AP */
#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */
-#define X86_FEATURE_XTOPOLOGY (3*32+21) /* cpu topology enum extensions */
+#define X86_FEATURE_XTOPOLOGY (3*32+22) /* cpu topology enum extensions */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */
{
}
-#if APIC_DEBUG
- #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
-#else
- #define inquire_remote_apic(apicid) {}
-#endif
+#define inquire_remote_apic(apicid) do { \
+ if (apic_verbosity >= APIC_DEBUG) \
+ __inquire_remote_apic(apicid); \
+ } while (0)
#endif /* __ASM_MACH_WAKECPU_H */
extern int fixmaps_set;
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
void native_set_fixmap(enum fixed_addresses idx,
unsigned long phys, pgprot_t flags);
#include <asm/acpi.h>
#include <asm/apicdef.h>
#include <asm/page.h>
-#ifdef CONFIG_HIGHMEM
#include <linux/threads.h>
#include <asm/kmap_types.h>
-#endif
/*
* Here we define all the compile-time 'special' virtual
#ifdef CONFIG_X86_CYCLONE_TIMER
FIX_CYCLONE_TIMER, /*cyclone timer register*/
#endif
-#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
#ifdef CONFIG_PCI_MMCONFIG
FIX_PCIE_MCFG,
#endif
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/paravirt.h>
+#include <asm/fixmap.h>
/* declarations for highmem.c */
extern unsigned long highstart_pfn, highend_pfn;
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
/*
* Right now we initialize only a single pte table. It can be extended
* easily, subsequent pte tables have to be allocated in one physical
extern void early_ioremap_init(void);
extern void early_ioremap_clear(void);
extern void early_ioremap_reset(void);
-extern void *early_ioremap(unsigned long offset, unsigned long size);
-extern void *early_memremap(unsigned long offset, unsigned long size);
-extern void early_iounmap(void *addr, unsigned long size);
+extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
+extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
+extern void early_iounmap(void __iomem *addr, unsigned long size);
extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
extern int force_iommu, no_iommu;
extern int iommu_detected;
extern int dmar_disabled;
-extern int forbid_dac;
extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len);
{
}
-#if APIC_DEBUG
- #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
-#else
- #define inquire_remote_apic(apicid) {}
-#endif
+#define inquire_remote_apic(apicid) do { \
+ if (apic_verbosity >= APIC_DEBUG) \
+ __inquire_remote_apic(apicid); \
+ } while (0)
#endif /* _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H */
write_cr3(pgd);
}
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
+#define pud_page(pud) pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *)pud_page(*(pud)) + \
+#define pmd_offset(pud, address) ((pmd_t *)pud_page_vaddr(*(pud)) + \
pmd_index(address))
#ifdef CONFIG_SMP
#endif /* CONFIG_X86_LOCAL_APIC */
+#ifdef CONFIG_X86_HAS_BOOT_CPU_ID
+extern unsigned char boot_cpu_id;
+#else
+#define boot_cpu_id 0
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_SMP_H */
#include <linux/numa.h>
#include <linux/percpu.h>
+#include <linux/timer.h>
#include <asm/types.h>
#include <asm/percpu.h>
*/
void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_SMP
+#ifdef CONFIG_X86_SMP
unsigned int eax, ebx, ecx, edx, sub_index;
unsigned int ht_mask_width, core_plus_mask_width;
unsigned int core_select_mask, core_level_siblings;
#include <asm/pat.h>
#include <asm/asm.h>
#include <asm/numa.h>
+#include <asm/smp.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
this_cpu->c_early_init(c);
validate_pat_support(c);
+
+#ifdef CONFIG_SMP
+ c->cpu_index = boot_cpu_id;
+#endif
}
void __init early_cpu_init(void)
/*
* Boot processor to setup the FP and extended state context info.
*/
- if (!smp_processor_id())
+ if (smp_processor_id() == boot_cpu_id)
init_thread_xstate();
xsave_init();
res->start = e820.map[i].addr;
res->end = end;
- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ res->flags = IORESOURCE_MEM;
/*
* don't register the region that could be conflicted with
* pci device BAR resource and insert them later in
* pcibios_resource_survey()
*/
- if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+ if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) {
+ res->flags |= IORESOURCE_BUSY;
insert_resource(&iomem_resource, res);
+ }
res++;
}
res = e820_res;
for (i = 0; i < e820.nr_map; i++) {
if (!res->parent && res->end)
- reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+ insert_resource_expand_to_fit(&iomem_resource, res);
res++;
}
}
struct pci_device_id k8_nb_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{}
};
EXPORT_SYMBOL(k8_nb_ids);
page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
page_list[PA_PTE_1] = __pa(kexec_pte1);
page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
- page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
+
+ if (image->type == KEXEC_TYPE_DEFAULT)
+ page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
+ << PAGE_SHIFT);
/* The segment registers are funny things, they have both a
* visible and an invisible part. Whenever the visible part is
#include <asm/microcode.h>
MODULE_DESCRIPTION("AMD Microcode Update Driver");
-MODULE_AUTHOR("Peter Oruba <peter.oruba@amd.com>");
+MODULE_AUTHOR("Peter Oruba");
MODULE_LICENSE("GPL v2");
#define UCODE_MAGIC 0x00414d44
printk(KERN_INFO
"Microcode Update Driver: v" MICROCODE_VERSION
- " <tigran@aivazian.fsnet.co.uk>"
- " <peter.oruba@amd.com>\n");
+ " <tigran@aivazian.fsnet.co.uk>,"
+ " Peter Oruba\n");
return 0;
}
#include <asm/calgary.h>
#include <asm/amd_iommu.h>
+static int forbid_dac __read_mostly;
+
struct dma_mapping_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
}
/* Must execute after PCI subsystem */
fs_initcall(pci_iommu_init);
+
+#ifdef CONFIG_PCI
+/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
+
+static __devinit void via_no_dac(struct pci_dev *dev)
+{
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
+ printk(KERN_INFO "PCI: VIA PCI bridge detected."
+ "Disabling DAC.\n");
+ forbid_dac = 1;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
+#endif
long i;
if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
- printk(KERN_INFO "PCI-GART: No AMD northbridge found.\n");
+ printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
return;
}
if (!cpu_has_tsc || tsc_unstable)
return 1;
-#ifdef CONFIG_SMP
+#ifdef CONFIG_X86_SMP
if (apic_is_clustered_box())
return 1;
#endif
static void __init set_vsmp_pv_ops(void)
{
- void *address;
+ void __iomem *address;
unsigned int cap, ctl, cfg;
/* set vSMP magic bits to indicate vSMP capable kernel */
* lazily after a task switch, and Linux uses that gratefully, but wouldn't a
* name like "FPUTRAP bit" be a little less cryptic?
*
- * We store cr0 (and cr3) locally, because the Host never changes it. The
- * Guest sometimes wants to read it and we'd prefer not to bother the Host
- * unnecessarily. */
-static unsigned long current_cr0, current_cr3;
+ * We store cr0 locally because the Host never changes it. The Guest sometimes
+ * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+static unsigned long current_cr0;
static void lguest_write_cr0(unsigned long val)
{
lazy_hcall(LHCALL_TS, val & X86_CR0_TS, 0, 0);
return lguest_data.cr2;
}
+/* See lguest_set_pte() below. */
+static bool cr3_changed = false;
+
/* cr3 is the current toplevel pagetable page: the principle is the same as
- * cr0. Keep a local copy, and tell the Host when it changes. */
+ * cr0. Keep a local copy, and tell the Host when it changes. The only
+ * difference is that our local copy is in lguest_data because the Host needs
+ * to set it upon our initial hypercall. */
static void lguest_write_cr3(unsigned long cr3)
{
+ lguest_data.pgdir = cr3;
lazy_hcall(LHCALL_NEW_PGTABLE, cr3, 0, 0);
- current_cr3 = cr3;
+ cr3_changed = true;
}
static unsigned long lguest_read_cr3(void)
{
- return current_cr3;
+ return lguest_data.pgdir;
}
/* cr4 is used to enable and disable PGE, but we don't care. */
* to forget all of them. Fortunately, this is very rare.
*
* ... except in early boot when the kernel sets up the initial pagetables,
- * which makes booting astonishingly slow. So we don't even tell the Host
- * anything changed until we've done the first page table switch. */
+ * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
+ * the Host anything changed until we've done the first page table switch,
+ * which brings boot back to 0.25 seconds. */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
*ptep = pteval;
- /* Don't bother with hypercall before initial setup. */
- if (current_cr3)
+ if (cr3_changed)
lazy_hcall(LHCALL_FLUSH_TLB, 1, 0, 0);
}
static void lguest_flush_tlb_single(unsigned long addr)
{
/* Simply set it to zero: if it was not, it will fault back in. */
- lazy_hcall(LHCALL_SET_PTE, current_cr3, addr, 0);
+ lazy_hcall(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
}
/* This is what happens after the Guest has removed a large number of entries.
for (i = 0; i < LGUEST_IRQS; i++) {
int vector = FIRST_EXTERNAL_VECTOR + i;
+ /* Some systems map "vectors" to interrupts weirdly. Lguest has
+ * a straightforward 1 to 1 mapping, so force that here. */
+ __get_cpu_var(vector_irq)[vector] = i;
if (vector != SYSCALL_VECTOR) {
set_intr_gate(vector, interrupt[vector]);
set_irq_chip_and_handler_name(i, &lguest_irq_controller,
static void vic_enable_cpi(void);
static void do_boot_cpu(__u8 cpuid);
static void do_quad_bootstrap(void);
+static void initialize_secondary(void);
int hard_smp_processor_id(void);
int safe_smp_processor_id(void);
}
}
+void prefill_possible_map(void)
+{
+ /* This is empty on voyager because we need a much
+ * earlier detection which is done in find_smp_config */
+}
+
/* Set up all the basic stuff: read the SMP config and make all the
* SMP information reflect only the boot cpu. All others will be
* brought on-line later. */
struct cpuinfo_x86 *c = &cpu_data(id);
*c = boot_cpu_data;
+ c->cpu_index = id;
identify_secondary_cpu(c);
}
smp_tune_scheduling();
*/
smp_store_cpu_info(boot_cpu_id);
+ /* setup the jump vector */
+ initial_code = (unsigned long)initialize_secondary;
printk("CPU%d: ", boot_cpu_id);
print_cpu_info(&cpu_data(boot_cpu_id));
/* Reload the secondary CPUs task structure (this function does not
* return ) */
-void __init initialize_secondary(void)
+static void __init initialize_secondary(void)
{
#if 0
// AC kernels only
obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
pat.o pgtable.o gup.o
-obj-$(CONFIG_X86_32) += pgtable_32.o
+obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_X86_PTDUMP) += dump_pagetables.o
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
- start, len)))
+ (void __user *)start, len)))
goto slow_irqon;
/*
return 0;
}
-#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
pgprot_t kmap_prot;
kmap_prot = PAGE_KERNEL;
}
+#ifdef CONFIG_HIGHMEM
static void __init permanent_kmaps_init(pgd_t *pgd_base)
{
unsigned long vaddr;
#endif /* !CONFIG_NUMA */
#else
-# define kmap_init() do { } while (0)
# define permanent_kmaps_init(pgd_base) do { } while (0)
# define set_highmem_pages_init() do { } while (0)
#endif /* CONFIG_HIGHMEM */
unsigned long last_map_addr = 0;
unsigned long page_size_mask = 0;
unsigned long start_pfn, end_pfn;
+ unsigned long pos;
struct map_range mr[NR_RANGE_MR];
int nr_range, i;
int use_pse, use_gbpages;
- printk(KERN_INFO "init_memory_mapping\n");
+ printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
/*
* Find space for the kernel direct mapping tables.
/* head if not big page alignment ?*/
start_pfn = start >> PAGE_SHIFT;
- end_pfn = ((start + (PMD_SIZE - 1)) >> PMD_SHIFT)
+ pos = start_pfn << PAGE_SHIFT;
+ end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT)
<< (PMD_SHIFT - PAGE_SHIFT);
- nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
+ if (start_pfn < end_pfn) {
+ nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
+ pos = end_pfn << PAGE_SHIFT;
+ }
/* big page (2M) range*/
- start_pfn = ((start + (PMD_SIZE - 1))>>PMD_SHIFT)
+ start_pfn = ((pos + (PMD_SIZE - 1))>>PMD_SHIFT)
<< (PMD_SHIFT - PAGE_SHIFT);
- end_pfn = ((start + (PUD_SIZE - 1))>>PUD_SHIFT)
+ end_pfn = ((pos + (PUD_SIZE - 1))>>PUD_SHIFT)
<< (PUD_SHIFT - PAGE_SHIFT);
- if (end_pfn > ((end>>PUD_SHIFT)<<(PUD_SHIFT - PAGE_SHIFT)))
- end_pfn = ((end>>PUD_SHIFT)<<(PUD_SHIFT - PAGE_SHIFT));
- nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
- page_size_mask & (1<<PG_LEVEL_2M));
+ if (end_pfn > ((end>>PMD_SHIFT)<<(PMD_SHIFT - PAGE_SHIFT)))
+ end_pfn = ((end>>PMD_SHIFT)<<(PMD_SHIFT - PAGE_SHIFT));
+ if (start_pfn < end_pfn) {
+ nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
+ page_size_mask & (1<<PG_LEVEL_2M));
+ pos = end_pfn << PAGE_SHIFT;
+ }
/* big page (1G) range */
- start_pfn = end_pfn;
- end_pfn = (end>>PUD_SHIFT) << (PUD_SHIFT - PAGE_SHIFT);
- nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
+ start_pfn = ((pos + (PUD_SIZE - 1))>>PUD_SHIFT)
+ << (PUD_SHIFT - PAGE_SHIFT);
+ end_pfn = (end >> PUD_SHIFT) << (PUD_SHIFT - PAGE_SHIFT);
+ if (start_pfn < end_pfn) {
+ nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
page_size_mask &
((1<<PG_LEVEL_2M)|(1<<PG_LEVEL_1G)));
+ pos = end_pfn << PAGE_SHIFT;
+ }
/* tail is not big page (1G) alignment */
- start_pfn = end_pfn;
- end_pfn = (end>>PMD_SHIFT) << (PMD_SHIFT - PAGE_SHIFT);
- nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
- page_size_mask & (1<<PG_LEVEL_2M));
+ start_pfn = ((pos + (PMD_SIZE - 1))>>PMD_SHIFT)
+ << (PMD_SHIFT - PAGE_SHIFT);
+ end_pfn = (end >> PMD_SHIFT) << (PMD_SHIFT - PAGE_SHIFT);
+ if (start_pfn < end_pfn) {
+ nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
+ page_size_mask & (1<<PG_LEVEL_2M));
+ pos = end_pfn << PAGE_SHIFT;
+ }
/* tail is not big page (2M) alignment */
- start_pfn = end_pfn;
+ start_pfn = pos>>PAGE_SHIFT;
end_pfn = end>>PAGE_SHIFT;
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
max_pfn_mapped = last_mapped_pfn;
ret = __add_pages(zone, start_pfn, nr_pages);
- WARN_ON(1);
+ WARN_ON_ONCE(ret);
return ret;
}
void __init mem_init(void)
{
long codesize, reservedpages, datasize, initsize;
+ unsigned long absent_pages;
start_periodic_check_for_corruption();
#else
totalram_pages = free_all_bootmem();
#endif
- reservedpages = max_pfn - totalram_pages -
- absent_pages_in_range(0, max_pfn);
+
+ absent_pages = absent_pages_in_range(0, max_pfn);
+ reservedpages = max_pfn - totalram_pages - absent_pages;
after_bootmem = 1;
codesize = (unsigned long) &_etext - (unsigned long) &_text;
VSYSCALL_END - VSYSCALL_START);
printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
- "%ldk reserved, %ldk data, %ldk init)\n",
+ "%ldk absent, %ldk reserved, %ldk data, %ldk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
max_pfn << (PAGE_SHIFT-10),
codesize >> 10,
+ absent_pages << (PAGE_SHIFT-10),
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10);
--- /dev/null
+/*
+ * Copyright © 2008 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <asm/iomap.h>
+#include <linux/module.h>
+
+/* Map 'pfn' using fixed map 'type' and protections 'prot'
+ */
+void *
+iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ pagefault_disable();
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
+ arch_flush_lazy_mmu_mode();
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL_GPL(iomap_atomic_prot_pfn);
+
+void
+iounmap_atomic(void *kvaddr, enum km_type type)
+{
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ /*
+ * Force other mappings to Oops if they'll try to access this pte
+ * without first remap it. Keeping stale mappings around is a bad idea
+ * also, in case the page changes cacheability attributes or becomes
+ * a protected page in a hypervisor.
+ */
+ if (vaddr == __fix_to_virt(FIX_KMAP_BEGIN+idx))
+ kpte_clear_flush(kmap_pte-idx, vaddr);
+
+ arch_flush_lazy_mmu_mode();
+ pagefault_enable();
+}
+EXPORT_SYMBOL_GPL(iounmap_atomic);
unsigned long size)
{
unsigned long flags;
- void *ret;
+ void __iomem *ret;
int err;
/*
if (err < 0)
return NULL;
- ret = (void *) __ioremap_caller(phys_addr, size, flags,
- __builtin_return_address(0));
+ ret = __ioremap_caller(phys_addr, size, flags,
+ __builtin_return_address(0));
free_memtype(phys_addr, phys_addr + size);
- return (void __iomem *)ret;
+ return ret;
}
void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
__early_set_fixmap(idx, 0, __pgprot(0));
}
-static void *prev_map[FIX_BTMAPS_SLOTS] __initdata;
+static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata;
static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
static int __init check_early_ioremap_leak(void)
{
}
late_initcall(check_early_ioremap_leak);
-static void __init *__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
+static void __init __iomem *__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
{
unsigned long offset, last_addr;
unsigned int nrpages;
if (early_ioremap_debug)
printk(KERN_CONT "%08lx + %08lx\n", offset, fix_to_virt(idx0));
- prev_map[slot] = (void *) (offset + fix_to_virt(idx0));
+ prev_map[slot] = (void __iomem *)(offset + fix_to_virt(idx0));
return prev_map[slot];
}
/* Remap an IO device */
-void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
+void __init __iomem *early_ioremap(unsigned long phys_addr, unsigned long size)
{
return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO);
}
/* Remap memory */
-void __init *early_memremap(unsigned long phys_addr, unsigned long size)
+void __init __iomem *early_memremap(unsigned long phys_addr, unsigned long size)
{
return __early_ioremap(phys_addr, size, PAGE_KERNEL);
}
-void __init early_iounmap(void *addr, unsigned long size)
+void __init early_iounmap(void __iomem *addr, unsigned long size)
{
unsigned long virt_addr;
unsigned long offset;
--idx;
--nrpages;
}
- prev_map[slot] = 0;
+ prev_map[slot] = NULL;
}
void __this_fixmap_does_not_exist(void)
return 1;
}
#else
+/* This check is needed to avoid cache aliasing when PAT is enabled */
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
u64 from = ((u64)pfn) << PAGE_SHIFT;
u64 to = from + size;
u64 cursor = from;
+ if (!pat_enabled)
+ return 1;
+
while (cursor < to) {
if (!devmem_is_allowed(pfn)) {
printk(KERN_INFO
source "drivers/mfd/Kconfig"
+source "drivers/regulator/Kconfig"
+
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"
* do_pata_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Drive in question
- * @udma: udma mode, 0 - 6
* @isich: set if the chip is an ICH device
*
* Set UDMA mode for device, in host controller PCI config space.
sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
- sectors |= (tf->hob_lbal & 0xff) << 24;
+ sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
/**
* ata_pio_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
- * @fn: workqueue function to be scheduled
* @data: data for @fn to use
* @delay: delay time in msecs for workqueue function
*
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
+
+ if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
+ return 0;
+
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
+ { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
/* Devices we expect to fail diagnostics */
{ "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, },
+ /* Devices that do not need bridging limits applied */
+ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+
/* End Marker */
{ }
};
/* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
* few ATAPI devices choke on such DMA requests.
*/
- if (unlikely(qc->nbytes & 15))
+ if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
+ unlikely(qc->nbytes & 15))
return 1;
if (ap->ops->check_atapi_dma)
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
* to us. Restore SControl and disable all existing devices.
*/
__ata_port_for_each_link(link, ap) {
- sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
+ sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}
struct ata_port *ap;
struct ata_link *link;
struct ata_device *dev;
- unsigned long flags;
+ unsigned long flags, now;
unsigned int uninitialized_var(msecs);
int rc = 0;
}
link = dev->link;
+ now = jiffies;
if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS &&
link->eh_context.unloaded_mask & (1 << dev->devno) &&
- time_after(dev->unpark_deadline, jiffies))
- msecs = jiffies_to_msecs(dev->unpark_deadline - jiffies);
+ time_after(dev->unpark_deadline, now))
+ msecs = jiffies_to_msecs(dev->unpark_deadline - now);
else
msecs = 0;
static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
+static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
.slave_configure = nv_swncq_slave_config,
};
-/* OSDL bz3352 reports that some nv controllers can't determine device
- * signature reliably and nv_hardreset is implemented to work around
- * the problem. This was reported on nf3 and it's unclear whether any
- * other controllers are affected. However, the workaround has been
- * applied to all variants and there isn't much to gain by trying to
- * find out exactly which ones are affected at this point especially
- * because NV has moved over to ahci for newer controllers.
- */
static struct ata_port_operations nv_common_ops = {
.inherits = &ata_bmdma_port_ops,
- .hardreset = nv_hardreset,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
.hardreset = ATA_OP_NULL,
};
+/* OSDL bz3352 reports that nf2/3 controllers can't determine device
+ * signature reliably. Also, the following thread reports detection
+ * failure on cold boot with the standard debouncing timing.
+ *
+ * http://thread.gmane.org/gmane.linux.ide/34098
+ *
+ * Debounce with hotplug timing and request follow-up SRST.
+ */
static struct ata_port_operations nv_nf2_ops = {
.inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
+ .hardreset = nv_nf2_hardreset,
};
+/* CK804 finally gets hardreset right */
static struct ata_port_operations nv_ck804_ops = {
.inherits = &nv_common_ops,
.freeze = nv_ck804_freeze,
};
static struct ata_port_operations nv_adma_ops = {
- .inherits = &nv_common_ops,
+ .inherits = &nv_ck804_ops,
.check_atapi_dma = nv_adma_check_atapi_dma,
.sff_tf_read = nv_adma_tf_read,
};
static struct ata_port_operations nv_swncq_ops = {
- .inherits = &nv_common_ops,
+ .inherits = &nv_generic_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
iowrite8(mask, scr_addr + NV_INT_ENABLE);
}
+static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ bool online;
+ int rc;
+
+ rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+ &online, NULL);
+ return online ? -EAGAIN : rc;
+}
+
static void nv_ck804_freeze(struct ata_port *ap)
{
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
ata_sff_thaw(ap);
}
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- int rc;
-
- /* SATA hardreset fails to retrieve proper device signature on
- * some controllers. Request follow up SRST. For more info,
- * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
- */
- rc = sata_sff_hardreset(link, class, deadline);
- if (rc)
- return rc;
- return -EAGAIN;
-}
-
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
static void pdc_sata_freeze(struct ata_port *ap);
static void pdc_thaw(struct ata_port *ap);
static void pdc_sata_thaw(struct ata_port *ap);
+static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void pdc_error_handler(struct ata_port *ap);
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
static int pdc_pata_cable_detect(struct ata_port *ap);
.scr_read = pdc_sata_scr_read,
.scr_write = pdc_sata_scr_write,
.port_start = pdc_sata_port_start,
+ .hardreset = pdc_sata_hardreset,
};
/* First-generation chips need a more restrictive ->check_atapi_dma op */
.freeze = pdc_freeze,
.thaw = pdc_thaw,
.port_start = pdc_common_port_start,
+ .softreset = pdc_pata_softreset,
};
static const struct ata_port_info pdc_port_info[] = {
readl(host_mmio + hotplug_offset); /* flush */
}
+static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ pdc_reset_port(link->ap);
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ pdc_reset_port(link->ap);
+ return sata_sff_hardreset(link, class, deadline);
+}
+
static void pdc_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN))
#include <linux/libata.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "2.3"
+#define DRV_VERSION "2.4"
+/*
+ * vt8251 is different from other sata controllers of VIA. It has two
+ * channels, each channel has both Master and Slave slot.
+ */
enum board_ids_enum {
vt6420,
vt6421,
+ vt8251,
};
enum {
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val);
+static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val);
static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
static void svia_noop_freeze(struct ata_port *ap);
static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
static const struct pci_device_id svia_pci_tbl[] = {
{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
- { PCI_VDEVICE(VIA, 0x0591), vt6420 },
- { PCI_VDEVICE(VIA, 0x3149), vt6420 },
- { PCI_VDEVICE(VIA, 0x3249), vt6421 },
- { PCI_VDEVICE(VIA, 0x5287), vt6420 },
+ { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */
+ { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */
+ { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */
{ PCI_VDEVICE(VIA, 0x5372), vt6420 },
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
+ { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
{ } /* terminate list */
};
.scr_write = svia_scr_write,
};
+static struct ata_port_operations vt8251_ops = {
+ .inherits = &svia_base_ops,
+ .hardreset = sata_std_hardreset,
+ .scr_read = vt8251_scr_read,
+ .scr_write = vt8251_scr_write,
+};
+
static const struct ata_port_info vt6420_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.port_ops = &vt6421_pata_ops,
};
+static struct ata_port_info vt8251_port_info = {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS |
+ ATA_FLAG_NO_LEGACY,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &vt8251_ops,
+};
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
MODULE_LICENSE("GPL");
return 0;
}
+static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+ static const u8 ipm_tbl[] = { 1, 2, 6, 0 };
+ struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
+ int slot = 2 * link->ap->port_no + link->pmp;
+ u32 v = 0;
+ u8 raw;
+
+ switch (scr) {
+ case SCR_STATUS:
+ pci_read_config_byte(pdev, 0xA0 + slot, &raw);
+
+ /* read the DET field, bit0 and 1 of the config byte */
+ v |= raw & 0x03;
+
+ /* read the SPD field, bit4 of the configure byte */
+ if (raw & (1 << 4))
+ v |= 0x02 << 4;
+ else
+ v |= 0x01 << 4;
+
+ /* read the IPM field, bit2 and 3 of the config byte */
+ v |= ipm_tbl[(raw >> 2) & 0x3];
+ break;
+
+ case SCR_ERROR:
+ /* devices other than 5287 uses 0xA8 as base */
+ WARN_ON(pdev->device != 0x5287);
+ pci_read_config_dword(pdev, 0xB0 + slot * 4, &v);
+ break;
+
+ case SCR_CONTROL:
+ pci_read_config_byte(pdev, 0xA4 + slot, &raw);
+
+ /* read the DET field, bit0 and bit1 */
+ v |= ((raw & 0x02) << 1) | (raw & 0x01);
+
+ /* read the IPM field, bit2 and bit3 */
+ v |= ((raw >> 2) & 0x03) << 8;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *val = v;
+ return 0;
+}
+
+static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+ struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
+ int slot = 2 * link->ap->port_no + link->pmp;
+ u32 v = 0;
+
+ switch (scr) {
+ case SCR_ERROR:
+ /* devices other than 5287 uses 0xA8 as base */
+ WARN_ON(pdev->device != 0x5287);
+ pci_write_config_dword(pdev, 0xB0 + slot * 4, val);
+ return 0;
+
+ case SCR_CONTROL:
+ /* set the DET field */
+ v |= ((val & 0x4) >> 1) | (val & 0x1);
+
+ /* set the IPM field */
+ v |= ((val >> 8) & 0x3) << 2;
+
+ pci_write_config_byte(pdev, 0xA4 + slot, v);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
/**
* svia_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
return 0;
}
+static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
+{
+ const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL };
+ struct ata_host *host;
+ int i, rc;
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ *r_host = host;
+
+ rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
+ return rc;
+ }
+
+ /* 8251 hosts four sata ports as M/S of the two channels */
+ for (i = 0; i < host->n_ports; i++)
+ ata_slave_link_init(host->ports[i]);
+
+ return 0;
+}
+
static void svia_configure(struct pci_dev *pdev)
{
u8 tmp8;
if (rc)
return rc;
- if (board_id == vt6420)
- bar_sizes = &svia_bar_sizes[0];
- else
+ if (board_id == vt6421)
bar_sizes = &vt6421_bar_sizes[0];
+ else
+ bar_sizes = &svia_bar_sizes[0];
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
return -ENODEV;
}
- if (board_id == vt6420)
+ switch (board_id) {
+ case vt6420:
rc = vt6420_prepare_host(pdev, &host);
- else
+ break;
+ case vt6421:
rc = vt6421_prepare_host(pdev, &host);
+ break;
+ case vt8251:
+ rc = vt8251_prepare_host(pdev, &host);
+ break;
+ default:
+ rc = -EINVAL;
+ }
if (rc)
return rc;
* sysdev_suspend - Suspend all system devices.
* @state: Power state to enter.
*
- * We perform an almost identical operation as sys_device_shutdown()
+ * We perform an almost identical operation as sysdev_shutdown()
* above, though calling ->suspend() instead. Interrupts are disabled
* when this called. Devices are responsible for both saving state and
* quiescing or powering down the device.
/**
* sysdev_resume - Bring system devices back to life.
*
- * Similar to sys_device_suspend(), but we iterate the list forwards
+ * Similar to sysdev_suspend(), but we iterate the list forwards
* to guarantee that parent devices are resumed before their children.
*
* Note: Interrupts are disabled when called.
if (end == buf)
return -EINVAL;
*(unsigned long *)(ea->var) = new;
- return end - buf;
+ /* Always return full write size even if we didn't consume all */
+ return size;
}
EXPORT_SYMBOL_GPL(sysdev_store_ulong);
if (end == buf || new > INT_MAX || new < INT_MIN)
return -EINVAL;
*(int *)(ea->var) = new;
- return end - buf;
+ /* Always return full write size even if we didn't consume all */
+ return size;
}
EXPORT_SYMBOL_GPL(sysdev_store_int);
* Heinz Mauelshagen <mge@sistina.com>, Feb 2002
*
* Support for falling back on the write file operation when the address space
- * operations prepare_write and/or commit_write are not available on the
- * backing filesystem.
+ * operations write_begin is not available on the backing filesystem.
* Anton Altaparmakov, 16 Feb 2005
*
* Still To Fix:
*/
if (!file->f_op->splice_read)
goto out_putf;
- if (aops->prepare_write || aops->write_begin)
+ if (aops->write_begin)
lo_flags |= LO_FLAGS_USE_AOPS;
if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write)
lo_flags |= LO_FLAGS_READ_ONLY;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = bluecard_interrupt;
BT_DBG("%s", hdev->name);
- kfree(data->rx_skb[0]);
- kfree(data->rx_skb[1]);
+ kfree_skb(data->rx_skb[0]);
+ kfree_skb(data->rx_skb[1]);
kfree(data);
}
bt3c_info_t *info = dev_inst;
unsigned int iobase;
int iir;
+ irqreturn_t r = IRQ_NONE;
BUG_ON(!info->hdev);
outb(iir, iobase + CONTROL);
}
+ r = IRQ_HANDLED;
}
spin_unlock(&(info->lock));
- return IRQ_HANDLED;
+ return r;
}
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = bt3c_interrupt;
unsigned int iobase;
int boguscount = 0;
int iir, lsr;
+ irqreturn_t r = IRQ_NONE;
BUG_ON(!info->hdev);
iir = inb(iobase + UART_IIR) & UART_IIR_ID;
while (iir) {
+ r = IRQ_HANDLED;
/* Clear interrupt */
lsr = inb(iobase + UART_LSR);
spin_unlock(&(info->lock));
- return IRQ_HANDLED;
+ return r;
}
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = btuart_interrupt;
unsigned char msr;
int boguscount = 0;
int iir, lsr;
+ irqreturn_t r = IRQ_NONE;
BUG_ON(!info->hdev);
iir = inb(iobase + UART_IIR) & UART_IIR_ID;
while (iir) {
+ r = IRQ_HANDLED;
/* Clear interrupt */
lsr = inb(iobase + UART_LSR);
info->ri_latch = msr & UART_MSR_RI;
clear_bit(XMIT_WAITING, &(info->tx_state));
dtl1_write_wakeup(info);
+ r = IRQ_HANDLED;
}
spin_unlock(&(info->lock));
- return IRQ_HANDLED;
+ return r;
}
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = dtl1_interrupt;
return cdrom_open(gd.cd_info, bdev, mode);
}
-static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode)
+static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode)
{
- return cdrom_release(gd.cd_info, mode);
+ cdrom_release(gd.cd_info, mode);
+ return 0;
}
static int gdrom_bdops_mediachanged(struct gendisk *disk)
To compile this driver as a module, choose M here: the
module will be called js-rtc.
-config SGI_DS1286
- tristate "SGI DS1286 RTC support"
- depends on SGI_HAS_DS1286
- help
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock built into your computer.
- Every SGI has such a clock built in. It reports status information
- via the file /proc/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
-config SGI_IP27_RTC
- bool "SGI M48T35 RTC support"
- depends on SGI_IP27
- help
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock built into your computer.
- Every SGI has such a clock built in. It reports status information
- via the file /proc/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
config GEN_RTC
tristate "Generic /dev/rtc emulation"
depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
obj-$(CONFIG_HPET) += hpet.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
-obj-$(CONFIG_SGI_DS1286) += ds1286.o
-obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
obj-$(CONFIG_DS1302) += ds1302.o
obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/
ifeq ($(CONFIG_GENERIC_NVRAM),y)
+++ /dev/null
-/*
- * DS1286 Real Time Clock interface for Linux
- *
- * Copyright (C) 1998, 1999, 2000 Ralf Baechle
- *
- * Based on code written by Paul Gortmaker.
- *
- * This driver allows use of the real time clock (built into nearly all
- * computers) from user space. It exports the /dev/rtc interface supporting
- * various ioctl() and also the /proc/rtc pseudo-file for status
- * information.
- *
- * The ioctls can be used to set the interrupt behaviour and generation rate
- * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make
- * use of these timer interrupts, be they interval or alarm based.
- *
- * The /dev/rtc interface will block on reads until an interrupt has been
- * received. If a RTC interrupt has already happened, it will output an
- * unsigned long and then block. The output value contains the interrupt
- * status in the low byte and the number of interrupts since the last read
- * in the remaining high bytes. The /dev/rtc interface can also be used with
- * the select(2) call.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/ds1286.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/rtc.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <linux/proc_fs.h>
-#include <linux/jiffies.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
-#define DS1286_VERSION "1.0"
-
-/*
- * We sponge a minor off of the misc major. No need slurping
- * up another valuable major dev number for this. If you add
- * an ioctl, make sure you don't conflict with SPARC's RTC
- * ioctls.
- */
-
-static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait);
-
-static ssize_t ds1286_read(struct file *file, char *buf,
- size_t count, loff_t *ppos);
-
-static int ds1286_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
-
-static unsigned int ds1286_poll(struct file *file, poll_table *wait);
-
-static void ds1286_get_alm_time (struct rtc_time *alm_tm);
-static void ds1286_get_time(struct rtc_time *rtc_tm);
-static int ds1286_set_time(struct rtc_time *rtc_tm);
-
-static inline unsigned char ds1286_is_updating(void);
-
-static DEFINE_SPINLOCK(ds1286_lock);
-
-static int ds1286_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-
-/*
- * Bits in rtc_status. (7 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
-#define RTC_TIMER_ON 0x02 /* missed irq timer active */
-
-static unsigned char ds1286_status; /* bitmapped status byte. */
-
-static unsigned char days_in_mo[] = {
- 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-/*
- * Now all the various file operations that we export.
- */
-
-static ssize_t ds1286_read(struct file *file, char *buf,
- size_t count, loff_t *ppos)
-{
- return -EIO;
-}
-
-static int ds1286_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct rtc_time wtime;
-
- switch (cmd) {
- case RTC_AIE_OFF: /* Mask alarm int. enab. bit */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val |= RTC_TDM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_AIE_ON: /* Allow alarm interrupts. */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val &= ~RTC_TDM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_WIE_OFF: /* Mask watchdog int. enab. bit */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val |= RTC_WAM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_WIE_ON: /* Allow watchdog interrupts. */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val &= ~RTC_WAM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_ALM_READ: /* Read the present alarm time */
- {
- /*
- * This returns a struct rtc_time. Reading >= 0xc0
- * means "don't care" or "match all". Only the tm_hour,
- * tm_min, and tm_sec values are filled in.
- */
-
- memset(&wtime, 0, sizeof(wtime));
- ds1286_get_alm_time(&wtime);
- break;
- }
- case RTC_ALM_SET: /* Store a time into the alarm */
- {
- /*
- * This expects a struct rtc_time. Writing 0xff means
- * "don't care" or "match all". Only the tm_hour,
- * tm_min and tm_sec are used.
- */
- unsigned char hrs, min, sec;
- struct rtc_time alm_tm;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&alm_tm, (struct rtc_time*)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- hrs = alm_tm.tm_hour;
- min = alm_tm.tm_min;
- sec = alm_tm.tm_sec;
-
- if (hrs >= 24)
- hrs = 0xff;
-
- if (min >= 60)
- min = 0xff;
-
- if (sec != 0)
- return -EINVAL;
-
- min = bin2bcd(min);
- min = bin2bcd(hrs);
-
- spin_lock(&ds1286_lock);
- rtc_write(hrs, RTC_HOURS_ALARM);
- rtc_write(min, RTC_MINUTES_ALARM);
- spin_unlock(&ds1286_lock);
-
- return 0;
- }
- case RTC_RD_TIME: /* Read the time/date from RTC */
- {
- memset(&wtime, 0, sizeof(wtime));
- ds1286_get_time(&wtime);
- break;
- }
- case RTC_SET_TIME: /* Set the RTC */
- {
- struct rtc_time rtc_tm;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- return ds1286_set_time(&rtc_tm);
- }
- default:
- return -EINVAL;
- }
- return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- * Also clear the previous interrupt data on an open, and clean
- * up things on a close.
- */
-
-static int ds1286_open(struct inode *inode, struct file *file)
-{
- lock_kernel();
- spin_lock_irq(&ds1286_lock);
-
- if (ds1286_status & RTC_IS_OPEN)
- goto out_busy;
-
- ds1286_status |= RTC_IS_OPEN;
-
- spin_unlock_irq(&ds1286_lock);
- unlock_kernel();
- return 0;
-
-out_busy:
- spin_lock_irq(&ds1286_lock);
- unlock_kernel();
- return -EBUSY;
-}
-
-static int ds1286_release(struct inode *inode, struct file *file)
-{
- ds1286_status &= ~RTC_IS_OPEN;
-
- return 0;
-}
-
-static unsigned int ds1286_poll(struct file *file, poll_table *wait)
-{
- poll_wait(file, &ds1286_wait, wait);
-
- return 0;
-}
-
-/*
- * The various file operations we support.
- */
-
-static const struct file_operations ds1286_fops = {
- .llseek = no_llseek,
- .read = ds1286_read,
- .poll = ds1286_poll,
- .ioctl = ds1286_ioctl,
- .open = ds1286_open,
- .release = ds1286_release,
-};
-
-static struct miscdevice ds1286_dev=
-{
- .minor = RTC_MINOR,
- .name = "rtc",
- .fops = &ds1286_fops,
-};
-
-static int __init ds1286_init(void)
-{
- int err;
-
- printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
-
- err = misc_register(&ds1286_dev);
- if (err)
- goto out;
-
- if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) {
- err = -ENOMEM;
-
- goto out_deregister;
- }
-
- return 0;
-
-out_deregister:
- misc_deregister(&ds1286_dev);
-
-out:
- return err;
-}
-
-static void __exit ds1286_exit(void)
-{
- remove_proc_entry("driver/rtc", NULL);
- misc_deregister(&ds1286_dev);
-}
-
-static char *days[] = {
- "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
-};
-
-/*
- * Info exported via "/proc/rtc".
- */
-static int ds1286_proc_output(char *buf)
-{
- char *p, *s;
- struct rtc_time tm;
- unsigned char hundredth, month, cmd, amode;
-
- p = buf;
-
- ds1286_get_time(&tm);
- hundredth = rtc_read(RTC_HUNDREDTH_SECOND);
- hundredth = bcd2bin(hundredth);
-
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d.%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n",
- tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth,
- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-
- /*
- * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will
- * match any value for that particular field. Values that are
- * greater than a valid time, but less than 0xc0 shouldn't appear.
- */
- ds1286_get_alm_time(&tm);
- p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]);
- if (tm.tm_hour <= 24)
- p += sprintf(p, "%02d:", tm.tm_hour);
- else
- p += sprintf(p, "**:");
-
- if (tm.tm_min <= 59)
- p += sprintf(p, "%02d\n", tm.tm_min);
- else
- p += sprintf(p, "**\n");
-
- month = rtc_read(RTC_MONTH);
- p += sprintf(p,
- "oscillator\t: %s\n"
- "square_wave\t: %s\n",
- (month & RTC_EOSC) ? "disabled" : "enabled",
- (month & RTC_ESQW) ? "disabled" : "enabled");
-
- amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) |
- ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) |
- ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7);
- if (amode == 7) s = "each minute";
- else if (amode == 3) s = "minutes match";
- else if (amode == 1) s = "hours and minutes match";
- else if (amode == 0) s = "days, hours and minutes match";
- else s = "invalid";
- p += sprintf(p, "alarm_mode\t: %s\n", s);
-
- cmd = rtc_read(RTC_CMD);
- p += sprintf(p,
- "alarm_enable\t: %s\n"
- "wdog_alarm\t: %s\n"
- "alarm_mask\t: %s\n"
- "wdog_alarm_mask\t: %s\n"
- "interrupt_mode\t: %s\n"
- "INTB_mode\t: %s_active\n"
- "interrupt_pins\t: %s\n",
- (cmd & RTC_TDF) ? "yes" : "no",
- (cmd & RTC_WAF) ? "yes" : "no",
- (cmd & RTC_TDM) ? "disabled" : "enabled",
- (cmd & RTC_WAM) ? "disabled" : "enabled",
- (cmd & RTC_PU_LVL) ? "pulse" : "level",
- (cmd & RTC_IBH_LO) ? "low" : "high",
- (cmd & RTC_IPSW) ? "unswapped" : "swapped");
-
- return p - buf;
-}
-
-static int ds1286_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = ds1286_proc_output (page);
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count)
- len = count;
- if (len<0)
- len = 0;
-
- return len;
-}
-
-/*
- * Returns true if a clock update is in progress
- */
-static inline unsigned char ds1286_is_updating(void)
-{
- return rtc_read(RTC_CMD) & RTC_TE;
-}
-
-
-static void ds1286_get_time(struct rtc_time *rtc_tm)
-{
- unsigned char save_control;
- unsigned long flags;
-
- /*
- * read RTC once any update in progress is done. The update
- * can take just over 2ms. We wait 10 to 20ms. There is no need to
- * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
- * If you need to know *exactly* when a second has started, enable
- * periodic update complete interrupts, (via ioctl) and then
- * immediately read /dev/rtc which will block until you get the IRQ.
- * Once the read clears, read the RTC time (again via ioctl). Easy.
- */
-
- if (ds1286_is_updating() != 0)
- msleep(20);
-
- /*
- * Only the values that we read from the RTC are set. We leave
- * tm_wday, tm_yday and tm_isdst untouched. Even though the
- * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
- * by the RTC when initially set to a non-zero value.
- */
- spin_lock_irqsave(&ds1286_lock, flags);
- save_control = rtc_read(RTC_CMD);
- rtc_write((save_control|RTC_TE), RTC_CMD);
-
- rtc_tm->tm_sec = rtc_read(RTC_SECONDS);
- rtc_tm->tm_min = rtc_read(RTC_MINUTES);
- rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f;
- rtc_tm->tm_mday = rtc_read(RTC_DATE);
- rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f;
- rtc_tm->tm_year = rtc_read(RTC_YEAR);
-
- rtc_write(save_control, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
- rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
- rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
- rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
- rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
- rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-
- /*
- * Account for differences between how the RTC uses the values
- * and how they are defined in a struct rtc_time;
- */
- if (rtc_tm->tm_year < 45)
- rtc_tm->tm_year += 30;
- if ((rtc_tm->tm_year += 40) < 70)
- rtc_tm->tm_year += 100;
-
- rtc_tm->tm_mon--;
-}
-
-static int ds1286_set_time(struct rtc_time *rtc_tm)
-{
- unsigned char mon, day, hrs, min, sec, leap_yr;
- unsigned char save_control;
- unsigned int yrs;
- unsigned long flags;
-
-
- yrs = rtc_tm->tm_year + 1900;
- mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */
- day = rtc_tm->tm_mday;
- hrs = rtc_tm->tm_hour;
- min = rtc_tm->tm_min;
- sec = rtc_tm->tm_sec;
-
- if (yrs < 1970)
- return -EINVAL;
-
- leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
- if ((mon > 12) || (day == 0))
- return -EINVAL;
-
- if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
- return -EINVAL;
-
- if ((hrs >= 24) || (min >= 60) || (sec >= 60))
- return -EINVAL;
-
- if ((yrs -= 1940) > 255) /* They are unsigned */
- return -EINVAL;
-
- if (yrs >= 100)
- yrs -= 100;
-
- sec = bin2bcd(sec);
- min = bin2bcd(min);
- hrs = bin2bcd(hrs);
- day = bin2bcd(day);
- mon = bin2bcd(mon);
- yrs = bin2bcd(yrs);
-
- spin_lock_irqsave(&ds1286_lock, flags);
- save_control = rtc_read(RTC_CMD);
- rtc_write((save_control|RTC_TE), RTC_CMD);
-
- rtc_write(yrs, RTC_YEAR);
- rtc_write(mon, RTC_MONTH);
- rtc_write(day, RTC_DATE);
- rtc_write(hrs, RTC_HOURS);
- rtc_write(min, RTC_MINUTES);
- rtc_write(sec, RTC_SECONDS);
- rtc_write(0, RTC_HUNDREDTH_SECOND);
-
- rtc_write(save_control, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
-}
-
-static void ds1286_get_alm_time(struct rtc_time *alm_tm)
-{
- unsigned char cmd;
- unsigned long flags;
-
- /*
- * Only the values that we read from the RTC are set. That
- * means only tm_wday, tm_hour, tm_min.
- */
- spin_lock_irqsave(&ds1286_lock, flags);
- alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f;
- alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM) & 0x1f;
- alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM) & 0x07;
- cmd = rtc_read(RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
- alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
- alm_tm->tm_sec = 0;
-}
-
-module_init(ds1286_init);
-module_exit(ds1286_exit);
-
-MODULE_AUTHOR("Ralf Baechle");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(RTC_MINOR);
if (irq)
free_irq(irq, devp);
- if (file->f_flags & FASYNC)
- hpet_fasync(-1, file, 0);
-
file->private_data = NULL;
return 0;
}
+++ /dev/null
-/*
- * Driver for the SGS-Thomson M48T35 Timekeeper RAM chip
- *
- * Real Time Clock interface for Linux
- *
- * TODO: Implement periodic interrupts.
- *
- * Copyright (C) 2000 Silicon Graphics, Inc.
- * Written by Ulf Carlsson (ulfc@engr.sgi.com)
- *
- * Based on code written by Paul Gortmaker.
- *
- * This driver allows use of the real time clock (built into
- * nearly all computers) from user space. It exports the /dev/rtc
- * interface supporting various ioctl() and also the /proc/rtc
- * pseudo-file for status information.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#define RTC_VERSION "1.09b"
-
-#include <linux/bcd.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-
-#include <asm/m48t35.h>
-#include <asm/sn/ioc3.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/sn0/ip27.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/sn_private.h>
-
-static long rtc_ioctl(struct file *filp, unsigned int cmd,
- unsigned long arg);
-
-static int rtc_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-
-static void get_rtc_time(struct rtc_time *rtc_tm);
-
-/*
- * Bits in rtc_status. (6 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
-#define RTC_TIMER_ON 0x02 /* missed irq timer active */
-
-static unsigned char rtc_status; /* bitmapped status byte. */
-static unsigned long rtc_freq; /* Current periodic IRQ rate */
-static struct m48t35_rtc *rtc;
-
-/*
- * If this driver ever becomes modularised, it will be really nice
- * to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1970; /* year corresponding to 0x00 */
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-
- struct rtc_time wtime;
-
- switch (cmd) {
- case RTC_RD_TIME: /* Read the time/date from RTC */
- {
- get_rtc_time(&wtime);
- break;
- }
- case RTC_SET_TIME: /* Set the RTC */
- {
- struct rtc_time rtc_tm;
- unsigned char mon, day, hrs, min, sec, leap_yr;
- unsigned int yrs;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- yrs = rtc_tm.tm_year + 1900;
- mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
- day = rtc_tm.tm_mday;
- hrs = rtc_tm.tm_hour;
- min = rtc_tm.tm_min;
- sec = rtc_tm.tm_sec;
-
- if (yrs < 1970)
- return -EINVAL;
-
- leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
- if ((mon > 12) || (day == 0))
- return -EINVAL;
-
- if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
- return -EINVAL;
-
- if ((hrs >= 24) || (min >= 60) || (sec >= 60))
- return -EINVAL;
-
- if ((yrs -= epoch) > 255) /* They are unsigned */
- return -EINVAL;
-
- if (yrs > 169)
- return -EINVAL;
-
- if (yrs >= 100)
- yrs -= 100;
-
- sec = bin2bcd(sec);
- min = bin2bcd(min);
- hrs = bin2bcd(hrs);
- day = bin2bcd(day);
- mon = bin2bcd(mon);
- yrs = bin2bcd(yrs);
-
- spin_lock_irq(&rtc_lock);
- rtc->control |= M48T35_RTC_SET;
- rtc->year = yrs;
- rtc->month = mon;
- rtc->date = day;
- rtc->hour = hrs;
- rtc->min = min;
- rtc->sec = sec;
- rtc->control &= ~M48T35_RTC_SET;
- spin_unlock_irq(&rtc_lock);
-
- return 0;
- }
- default:
- return -EINVAL;
- }
- return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- * Also clear the previous interrupt data on an open, and clean
- * up things on a close.
- */
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
- lock_kernel();
- spin_lock_irq(&rtc_lock);
-
- if (rtc_status & RTC_IS_OPEN) {
- spin_unlock_irq(&rtc_lock);
- unlock_kernel();
- return -EBUSY;
- }
-
- rtc_status |= RTC_IS_OPEN;
- spin_unlock_irq(&rtc_lock);
- unlock_kernel();
-
- return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
- /*
- * Turn off all interrupts once the device is no longer
- * in use, and clear the data.
- */
-
- spin_lock_irq(&rtc_lock);
- rtc_status &= ~RTC_IS_OPEN;
- spin_unlock_irq(&rtc_lock);
-
- return 0;
-}
-
-/*
- * The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = rtc_ioctl,
- .open = rtc_open,
- .release = rtc_release,
-};
-
-static struct miscdevice rtc_dev=
-{
- RTC_MINOR,
- "rtc",
- &rtc_fops
-};
-
-static int __init rtc_init(void)
-{
- rtc = (struct m48t35_rtc *)
- (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0);
-
- printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
- if (misc_register(&rtc_dev)) {
- printk(KERN_ERR "rtc: cannot register misc device.\n");
- return -ENODEV;
- }
- if (!create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)) {
- printk(KERN_ERR "rtc: cannot create /proc/rtc.\n");
- misc_deregister(&rtc_dev);
- return -ENOENT;
- }
-
- rtc_freq = 1024;
-
- return 0;
-}
-
-static void __exit rtc_exit (void)
-{
- /* interrupts and timer disabled at this point by rtc_release */
-
- remove_proc_entry ("rtc", NULL);
- misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-/*
- * Info exported via "/proc/rtc".
- */
-
-static int rtc_get_status(char *buf)
-{
- char *p;
- struct rtc_time tm;
-
- /*
- * Just emulate the standard /proc/rtc
- */
-
- p = buf;
-
- get_rtc_time(&tm);
-
- /*
- * There is no way to tell if the luser has the RTC set for local
- * time or for Universal Standard Time (GMT). Probably local though.
- */
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
- "rtc_epoch\t: %04lu\n"
- "24hr\t\t: yes\n",
- tm.tm_hour, tm.tm_min, tm.tm_sec,
- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch);
-
- return p - buf;
-}
-
-static int rtc_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = rtc_get_status(page);
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-}
-
-static void get_rtc_time(struct rtc_time *rtc_tm)
-{
- /*
- * Do we need to wait for the last update to finish?
- */
-
- /*
- * Only the values that we read from the RTC are set. We leave
- * tm_wday, tm_yday and tm_isdst untouched. Even though the
- * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
- * by the RTC when initially set to a non-zero value.
- */
- spin_lock_irq(&rtc_lock);
- rtc->control |= M48T35_RTC_READ;
- rtc_tm->tm_sec = rtc->sec;
- rtc_tm->tm_min = rtc->min;
- rtc_tm->tm_hour = rtc->hour;
- rtc_tm->tm_mday = rtc->date;
- rtc_tm->tm_mon = rtc->month;
- rtc_tm->tm_year = rtc->year;
- rtc->control &= ~M48T35_RTC_READ;
- spin_unlock_irq(&rtc_lock);
-
- rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
- rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
- rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
- rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
- rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
- rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-
- /*
- * Account for differences between how the RTC uses the values
- * and how they are defined in a struct rtc_time;
- */
- if ((rtc_tm->tm_year += (epoch - 1900)) <= 69)
- rtc_tm->tm_year += 100;
-
- rtc_tm->tm_mon--;
-}
if (rv)
return rv;
- ipmi_fasync (-1, file, 0);
-
/* FIXME - free the messages in the list. */
kfree(priv);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
MODULE_DESCRIPTION("Linux device interface for the IPMI message handler.");
+MODULE_ALIAS("platform:ipmi_si");
clear_bit(0, &ipmi_wdog_open);
}
- ipmi_fasync(-1, filep, 0);
expect_close = 0;
return 0;
/* Initialize the struct pcmcia_device structure */
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
return fasync_helper(fd, filp, on, &fasync);
}
-static int random_release(struct inode *inode, struct file *filp)
-{
- return fasync_helper(-1, filp, 0, &fasync);
-}
-
const struct file_operations random_fops = {
.read = random_read,
.write = random_write,
.poll = random_poll,
.unlocked_ioctl = random_ioctl,
.fasync = random_fasync,
- .release = random_release,
};
const struct file_operations urandom_fops = {
.write = random_write,
.unlocked_ioctl = random_ioctl,
.fasync = random_fasync,
- .release = random_release,
};
/***************************************************************
}
spin_unlock_irq(&rtc_lock);
- if (file->f_flags & FASYNC)
- rtc_fasync(-1, file, 0);
no_irq:
#endif
static int sonypi_misc_release(struct inode *inode, struct file *file)
{
- sonypi_misc_fasync(-1, file, 0);
mutex_lock(&sonypi_device.lock);
sonypi_device.open_count--;
mutex_unlock(&sonypi_device.lock);
Support for error detection and correction on the Intel
3000 and 3010 server chipsets.
+config EDAC_X38
+ tristate "Intel X38"
+ depends on EDAC_MM_EDAC && PCI && X86
+ help
+ Support for error detection and correction on the Intel
+ X38 server chipsets.
+
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC_MM_EDAC && PCI && X86_32
obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o
obj-$(CONFIG_EDAC_I82975X) += i82975x_edac.o
obj-$(CONFIG_EDAC_I3000) += i3000_edac.o
+obj-$(CONFIG_EDAC_X38) += x38_edac.o
obj-$(CONFIG_EDAC_I82860) += i82860_edac.o
obj-$(CONFIG_EDAC_R82600) += r82600_edac.o
obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o
*/
#undef DEBUG
+#include <linux/edac.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
if (regs == NULL)
return -ENODEV;
+ edac_op_state = EDAC_OPSTATE_POLL;
+
/* Get channel population */
reg = in_be64(®s->mic_mnt_cfg);
dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
--- /dev/null
+/*
+ * Intel X38 Memory Controller kernel module
+ * Copyright (C) 2008 Cluster Computing, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This file is based on i3200_edac.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include "edac_core.h"
+
+#define X38_REVISION "1.1"
+
+#define EDAC_MOD_STR "x38_edac"
+
+#define PCI_DEVICE_ID_INTEL_X38_HB 0x29e0
+
+#define X38_RANKS 8
+#define X38_RANKS_PER_CHANNEL 4
+#define X38_CHANNELS 2
+
+/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
+
+#define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */
+#define X38_MCHBAR_HIGH 0x4b
+#define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */
+#define X38_MMR_WINDOW_SIZE 16384
+
+#define X38_TOM 0xa0 /* Top of Memory (16b)
+ *
+ * 15:10 reserved
+ * 9:0 total populated physical memory
+ */
+#define X38_TOM_MASK 0x3ff /* bits 9:0 */
+#define X38_TOM_SHIFT 26 /* 64MiB grain */
+
+#define X38_ERRSTS 0xc8 /* Error Status Register (16b)
+ *
+ * 15 reserved
+ * 14 Isochronous TBWRR Run Behind FIFO Full
+ * (ITCV)
+ * 13 Isochronous TBWRR Run Behind FIFO Put
+ * (ITSTV)
+ * 12 reserved
+ * 11 MCH Thermal Sensor Event
+ * for SMI/SCI/SERR (GTSE)
+ * 10 reserved
+ * 9 LOCK to non-DRAM Memory Flag (LCKF)
+ * 8 reserved
+ * 7 DRAM Throttle Flag (DTF)
+ * 6:2 reserved
+ * 1 Multi-bit DRAM ECC Error Flag (DMERR)
+ * 0 Single-bit DRAM ECC Error Flag (DSERR)
+ */
+#define X38_ERRSTS_UE 0x0002
+#define X38_ERRSTS_CE 0x0001
+#define X38_ERRSTS_BITS (X38_ERRSTS_UE | X38_ERRSTS_CE)
+
+
+/* Intel MMIO register space - device 0 function 0 - MMR space */
+
+#define X38_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4)
+ *
+ * 15:10 reserved
+ * 9:0 Channel 0 DRAM Rank Boundary Address
+ */
+#define X38_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */
+#define X38_DRB_MASK 0x3ff /* bits 9:0 */
+#define X38_DRB_SHIFT 26 /* 64MiB grain */
+
+#define X38_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b)
+ *
+ * 63:48 Error Column Address (ERRCOL)
+ * 47:32 Error Row Address (ERRROW)
+ * 31:29 Error Bank Address (ERRBANK)
+ * 28:27 Error Rank Address (ERRRANK)
+ * 26:24 reserved
+ * 23:16 Error Syndrome (ERRSYND)
+ * 15: 2 reserved
+ * 1 Multiple Bit Error Status (MERRSTS)
+ * 0 Correctable Error Status (CERRSTS)
+ */
+#define X38_C1ECCERRLOG 0x680 /* Channel 1 ECC Error Log (64b) */
+#define X38_ECCERRLOG_CE 0x1
+#define X38_ECCERRLOG_UE 0x2
+#define X38_ECCERRLOG_RANK_BITS 0x18000000
+#define X38_ECCERRLOG_SYNDROME_BITS 0xff0000
+
+#define X38_CAPID0 0xe0 /* see P.94 of spec for details */
+
+static int x38_channel_num;
+
+static int how_many_channel(struct pci_dev *pdev)
+{
+ unsigned char capid0_8b; /* 8th byte of CAPID0 */
+
+ pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b);
+ if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */
+ debugf0("In single channel mode.\n");
+ x38_channel_num = 1;
+ } else {
+ debugf0("In dual channel mode.\n");
+ x38_channel_num = 2;
+ }
+
+ return x38_channel_num;
+}
+
+static unsigned long eccerrlog_syndrome(u64 log)
+{
+ return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16;
+}
+
+static int eccerrlog_row(int channel, u64 log)
+{
+ return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) |
+ (channel * X38_RANKS_PER_CHANNEL);
+}
+
+enum x38_chips {
+ X38 = 0,
+};
+
+struct x38_dev_info {
+ const char *ctl_name;
+};
+
+struct x38_error_info {
+ u16 errsts;
+ u16 errsts2;
+ u64 eccerrlog[X38_CHANNELS];
+};
+
+static const struct x38_dev_info x38_devs[] = {
+ [X38] = {
+ .ctl_name = "x38"},
+};
+
+static struct pci_dev *mci_pdev;
+static int x38_registered = 1;
+
+
+static void x38_clear_error_info(struct mem_ctl_info *mci)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * Clear any error bits.
+ * (Yes, we really clear bits by writing 1 to them.)
+ */
+ pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS,
+ X38_ERRSTS_BITS);
+}
+
+static u64 x38_readq(const void __iomem *addr)
+{
+ return readl(addr) | (((u64)readl(addr + 4)) << 32);
+}
+
+static void x38_get_and_clear_error_info(struct mem_ctl_info *mci,
+ struct x38_error_info *info)
+{
+ struct pci_dev *pdev;
+ void __iomem *window = mci->pvt_info;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, X38_ERRSTS, &info->errsts);
+ if (!(info->errsts & X38_ERRSTS_BITS))
+ return;
+
+ info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG);
+ if (x38_channel_num == 2)
+ info->eccerrlog[1] = x38_readq(window + X38_C1ECCERRLOG);
+
+ pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2);
+
+ /*
+ * If the error is the same for both reads then the first set
+ * of reads is valid. If there is a change then there is a CE
+ * with no info and the second set of reads is valid and
+ * should be UE info.
+ */
+ if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) {
+ info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG);
+ if (x38_channel_num == 2)
+ info->eccerrlog[1] =
+ x38_readq(window + X38_C1ECCERRLOG);
+ }
+
+ x38_clear_error_info(mci);
+}
+
+static void x38_process_error_info(struct mem_ctl_info *mci,
+ struct x38_error_info *info)
+{
+ int channel;
+ u64 log;
+
+ if (!(info->errsts & X38_ERRSTS_BITS))
+ return;
+
+ if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) {
+ edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
+ info->errsts = info->errsts2;
+ }
+
+ for (channel = 0; channel < x38_channel_num; channel++) {
+ log = info->eccerrlog[channel];
+ if (log & X38_ECCERRLOG_UE) {
+ edac_mc_handle_ue(mci, 0, 0,
+ eccerrlog_row(channel, log), "x38 UE");
+ } else if (log & X38_ECCERRLOG_CE) {
+ edac_mc_handle_ce(mci, 0, 0,
+ eccerrlog_syndrome(log),
+ eccerrlog_row(channel, log), 0, "x38 CE");
+ }
+ }
+}
+
+static void x38_check(struct mem_ctl_info *mci)
+{
+ struct x38_error_info info;
+
+ debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ x38_get_and_clear_error_info(mci, &info);
+ x38_process_error_info(mci, &info);
+}
+
+
+void __iomem *x38_map_mchbar(struct pci_dev *pdev)
+{
+ union {
+ u64 mchbar;
+ struct {
+ u32 mchbar_low;
+ u32 mchbar_high;
+ };
+ } u;
+ void __iomem *window;
+
+ pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low);
+ pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1);
+ pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high);
+ u.mchbar &= X38_MCHBAR_MASK;
+
+ if (u.mchbar != (resource_size_t)u.mchbar) {
+ printk(KERN_ERR
+ "x38: mmio space beyond accessible range (0x%llx)\n",
+ (unsigned long long)u.mchbar);
+ return NULL;
+ }
+
+ window = ioremap_nocache(u.mchbar, X38_MMR_WINDOW_SIZE);
+ if (!window)
+ printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n",
+ (unsigned long long)u.mchbar);
+
+ return window;
+}
+
+
+static void x38_get_drbs(void __iomem *window,
+ u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL])
+{
+ int i;
+
+ for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) {
+ drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK;
+ drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK;
+ }
+}
+
+static bool x38_is_stacked(struct pci_dev *pdev,
+ u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL])
+{
+ u16 tom;
+
+ pci_read_config_word(pdev, X38_TOM, &tom);
+ tom &= X38_TOM_MASK;
+
+ return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom;
+}
+
+static unsigned long drb_to_nr_pages(
+ u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL],
+ bool stacked, int channel, int rank)
+{
+ int n;
+
+ n = drbs[channel][rank];
+ if (rank > 0)
+ n -= drbs[channel][rank - 1];
+ if (stacked && (channel == 1) && drbs[channel][rank] ==
+ drbs[channel][X38_RANKS_PER_CHANNEL - 1]) {
+ n -= drbs[0][X38_RANKS_PER_CHANNEL - 1];
+ }
+
+ n <<= (X38_DRB_SHIFT - PAGE_SHIFT);
+ return n;
+}
+
+static int x38_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc;
+ int i;
+ struct mem_ctl_info *mci = NULL;
+ unsigned long last_page;
+ u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL];
+ bool stacked;
+ void __iomem *window;
+
+ debugf0("MC: %s()\n", __func__);
+
+ window = x38_map_mchbar(pdev);
+ if (!window)
+ return -ENODEV;
+
+ x38_get_drbs(window, drbs);
+
+ how_many_channel(pdev);
+
+ /* FIXME: unconventional pvt_info usage */
+ mci = edac_mc_alloc(0, X38_RANKS, x38_channel_num, 0);
+ if (!mci)
+ return -ENOMEM;
+
+ debugf3("MC: %s(): init mci\n", __func__);
+
+ mci->dev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR2;
+
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = X38_REVISION;
+ mci->ctl_name = x38_devs[dev_idx].ctl_name;
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = x38_check;
+ mci->ctl_page_to_phys = NULL;
+ mci->pvt_info = window;
+
+ stacked = x38_is_stacked(pdev, drbs);
+
+ /*
+ * The dram rank boundary (DRB) reg values are boundary addresses
+ * for each DRAM rank with a granularity of 64MB. DRB regs are
+ * cumulative; the last one will contain the total memory
+ * contained in all ranks.
+ */
+ last_page = -1UL;
+ for (i = 0; i < mci->nr_csrows; i++) {
+ unsigned long nr_pages;
+ struct csrow_info *csrow = &mci->csrows[i];
+
+ nr_pages = drb_to_nr_pages(drbs, stacked,
+ i / X38_RANKS_PER_CHANNEL,
+ i % X38_RANKS_PER_CHANNEL);
+
+ if (nr_pages == 0) {
+ csrow->mtype = MEM_EMPTY;
+ continue;
+ }
+
+ csrow->first_page = last_page + 1;
+ last_page += nr_pages;
+ csrow->last_page = last_page;
+ csrow->nr_pages = nr_pages;
+
+ csrow->grain = nr_pages << PAGE_SHIFT;
+ csrow->mtype = MEM_DDR2;
+ csrow->dtype = DEV_UNKNOWN;
+ csrow->edac_mode = EDAC_UNKNOWN;
+ }
+
+ x38_clear_error_info(mci);
+
+ rc = -ENODEV;
+ if (edac_mc_add_mc(mci)) {
+ debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+ debugf3("MC: %s(): success\n", __func__);
+ return 0;
+
+fail:
+ iounmap(window);
+ if (mci)
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+static int __devinit x38_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ debugf0("MC: %s()\n", __func__);
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = x38_probe1(pdev, ent->driver_data);
+ if (!mci_pdev)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void __devexit x38_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+
+ debugf0("%s()\n", __func__);
+
+ mci = edac_mc_del_mc(&pdev->dev);
+ if (!mci)
+ return;
+
+ iounmap(mci->pvt_info);
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id x38_pci_tbl[] __devinitdata = {
+ {
+ PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ X38},
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, x38_pci_tbl);
+
+static struct pci_driver x38_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = x38_init_one,
+ .remove = __devexit_p(x38_remove_one),
+ .id_table = x38_pci_tbl,
+};
+
+static int __init x38_init(void)
+{
+ int pci_rc;
+
+ debugf3("MC: %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&x38_driver);
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (!mci_pdev) {
+ x38_registered = 0;
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_X38_HB, NULL);
+ if (!mci_pdev) {
+ debugf0("x38 pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = x38_init_one(mci_pdev, x38_pci_tbl);
+ if (pci_rc < 0) {
+ debugf0("x38 init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&x38_driver);
+
+fail0:
+ if (mci_pdev)
+ pci_dev_put(mci_pdev);
+
+ return pci_rc;
+}
+
+static void __exit x38_exit(void)
+{
+ debugf3("MC: %s()\n", __func__);
+
+ pci_unregister_driver(&x38_driver);
+ if (!x38_registered) {
+ x38_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+ }
+}
+
+module_init(x38_init);
+module_exit(x38_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake");
+MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
if (dev->driver->driver_features & DRIVER_GEM)
drm_gem_release(dev, file_priv);
- drm_fasync(-1, filp, 0);
-
mutex_lock(&dev->ctxlist_mutex);
if (!list_empty(&dev->ctxlist)) {
struct drm_ctx_list *pos, *n;
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
ccflags-y := -Iinclude/drm
-i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_opregion.o \
+i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
i915_suspend.o \
i915_gem.o \
i915_gem_debug.o \
i915_gem_proc.o \
i915_gem_tiling.o
+i915-$(CONFIG_ACPI) += i915_opregion.o
i915-$(CONFIG_COMPAT) += i915_ioc32.o
obj-$(CONFIG_DRM_I915) += i915.o
DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
+ DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
#define _I915_DRV_H_
#include "i915_reg.h"
+#include <linux/io-mapping.h>
/* General customization:
*/
struct {
struct drm_mm gtt_space;
+ struct io_mapping *gtt_mapping;
+
/**
* List of objects currently involved in rendering from the
* ringbuffer.
struct drm_file *file_priv);
int i915_gem_get_tiling(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
void i915_gem_load(struct drm_device *dev);
int i915_gem_proc_init(struct drm_minor *minor);
void i915_gem_proc_cleanup(struct drm_minor *minor);
extern int i915_save_state(struct drm_device *dev);
extern int i915_restore_state(struct drm_device *dev);
+#ifdef CONFIG_ACPI
/* i915_opregion.c */
extern int intel_opregion_init(struct drm_device *dev);
extern void intel_opregion_free(struct drm_device *dev);
extern void opregion_asle_intr(struct drm_device *dev);
extern void opregion_enable_asle(struct drm_device *dev);
+#else
+static inline int intel_opregion_init(struct drm_device *dev) { return 0; }
+static inline void intel_opregion_free(struct drm_device *dev) { return; }
+static inline void opregion_asle_intr(struct drm_device *dev) { return; }
+static inline void opregion_enable_asle(struct drm_device *dev) { return; }
+#endif
/**
* Lock test for when it's just for synchronization of ring access.
return 0;
}
+int
+i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_get_aperture *args = data;
+ struct drm_i915_gem_object *obj_priv;
+
+ if (!(dev->driver->driver_features & DRIVER_GEM))
+ return -ENODEV;
+
+ args->aper_size = dev->gtt_total;
+ args->aper_available_size = args->aper_size;
+
+ list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ if (obj_priv->pin_count > 0)
+ args->aper_available_size -= obj_priv->obj->size;
+ }
+
+ return 0;
+}
+
/**
* Creates a new mm object and returns a handle to it.
return 0;
}
-/*
- * Try to write quickly with an atomic kmap. Return true on success.
- *
- * If this fails (which includes a partial write), we'll redo the whole
- * thing with the slow version.
- *
- * This is a workaround for the low performance of iounmap (approximate
- * 10% cpu cost on normal 3D workloads). kmap_atomic on HIGHMEM kernels
- * happens to let us map card memory without taking IPIs. When the vmap
- * rework lands we should be able to dump this hack.
+/* This is the fast write path which cannot handle
+ * page faults in the source data
*/
-static inline int fast_user_write(unsigned long pfn, char __user *user_data,
- int l, int o)
+
+static inline int
+fast_user_write(struct io_mapping *mapping,
+ loff_t page_base, int page_offset,
+ char __user *user_data,
+ int length)
{
-#ifdef CONFIG_HIGHMEM
- unsigned long unwritten;
char *vaddr_atomic;
+ unsigned long unwritten;
- vaddr_atomic = kmap_atomic_pfn(pfn, KM_USER0);
-#if WATCH_PWRITE
- DRM_INFO("pwrite i %d o %d l %d pfn %ld vaddr %p\n",
- i, o, l, pfn, vaddr_atomic);
-#endif
- unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + o, user_data, l);
- kunmap_atomic(vaddr_atomic, KM_USER0);
- return !unwritten;
-#else
+ vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base);
+ unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset,
+ user_data, length);
+ io_mapping_unmap_atomic(vaddr_atomic);
+ if (unwritten)
+ return -EFAULT;
+ return 0;
+}
+
+/* Here's the write path which can sleep for
+ * page faults
+ */
+
+static inline int
+slow_user_write(struct io_mapping *mapping,
+ loff_t page_base, int page_offset,
+ char __user *user_data,
+ int length)
+{
+ char __iomem *vaddr;
+ unsigned long unwritten;
+
+ vaddr = io_mapping_map_wc(mapping, page_base);
+ if (vaddr == NULL)
+ return -EFAULT;
+ unwritten = __copy_from_user(vaddr + page_offset,
+ user_data, length);
+ io_mapping_unmap(vaddr);
+ if (unwritten)
+ return -EFAULT;
return 0;
-#endif
}
static int
struct drm_file *file_priv)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
ssize_t remain;
- loff_t offset;
+ loff_t offset, page_base;
char __user *user_data;
- int ret = 0;
+ int page_offset, page_length;
+ int ret;
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
obj_priv->dirty = 1;
while (remain > 0) {
- unsigned long pfn;
- int i, o, l;
-
/* Operation in this page
*
- * i = page number
- * o = offset within page
- * l = bytes to copy
+ * page_base = page offset within aperture
+ * page_offset = offset within page
+ * page_length = bytes to copy for this page
*/
- i = offset >> PAGE_SHIFT;
- o = offset & (PAGE_SIZE-1);
- l = remain;
- if ((o + l) > PAGE_SIZE)
- l = PAGE_SIZE - o;
-
- pfn = (dev->agp->base >> PAGE_SHIFT) + i;
-
- if (!fast_user_write(pfn, user_data, l, o)) {
- unsigned long unwritten;
- char __iomem *vaddr;
-
- vaddr = ioremap_wc(pfn << PAGE_SHIFT, PAGE_SIZE);
-#if WATCH_PWRITE
- DRM_INFO("pwrite slow i %d o %d l %d "
- "pfn %ld vaddr %p\n",
- i, o, l, pfn, vaddr);
-#endif
- if (vaddr == NULL) {
- ret = -EFAULT;
- goto fail;
- }
- unwritten = __copy_from_user(vaddr + o, user_data, l);
-#if WATCH_PWRITE
- DRM_INFO("unwritten %ld\n", unwritten);
-#endif
- iounmap(vaddr);
- if (unwritten) {
- ret = -EFAULT;
+ page_base = (offset & ~(PAGE_SIZE-1));
+ page_offset = offset & (PAGE_SIZE-1);
+ page_length = remain;
+ if ((page_offset + remain) > PAGE_SIZE)
+ page_length = PAGE_SIZE - page_offset;
+
+ ret = fast_user_write (dev_priv->mm.gtt_mapping, page_base,
+ page_offset, user_data, page_length);
+
+ /* If we get a fault while copying data, then (presumably) our
+ * source page isn't available. In this case, use the
+ * non-atomic function
+ */
+ if (ret) {
+ ret = slow_user_write (dev_priv->mm.gtt_mapping,
+ page_base, page_offset,
+ user_data, page_length);
+ if (ret)
goto fail;
- }
}
- remain -= l;
- user_data += l;
- offset += l;
+ remain -= page_length;
+ user_data += page_length;
+ offset += page_length;
}
-#if WATCH_PWRITE && 1
- i915_gem_clflush_object(obj);
- i915_gem_dump_object(obj, args->offset + args->size, __func__, ~0);
- i915_gem_clflush_object(obj);
-#endif
fail:
i915_gem_object_unpin(obj);
struct drm_i915_gem_exec_object *entry)
{
struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_relocation_entry reloc;
struct drm_i915_gem_relocation_entry __user *relocs;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int i, ret;
- uint32_t last_reloc_offset = -1;
- void __iomem *reloc_page = NULL;
+ void __iomem *reloc_page;
/* Choose the GTT offset for our buffer and put it there. */
ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
* perform.
*/
reloc_offset = obj_priv->gtt_offset + reloc.offset;
- if (reloc_page == NULL ||
- (last_reloc_offset & ~(PAGE_SIZE - 1)) !=
- (reloc_offset & ~(PAGE_SIZE - 1))) {
- if (reloc_page != NULL)
- iounmap(reloc_page);
-
- reloc_page = ioremap_wc(dev->agp->base +
- (reloc_offset &
- ~(PAGE_SIZE - 1)),
- PAGE_SIZE);
- last_reloc_offset = reloc_offset;
- if (reloc_page == NULL) {
- drm_gem_object_unreference(target_obj);
- i915_gem_object_unpin(obj);
- return -ENOMEM;
- }
- }
-
+ reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+ (reloc_offset &
+ ~(PAGE_SIZE - 1)));
reloc_entry = (uint32_t __iomem *)(reloc_page +
- (reloc_offset & (PAGE_SIZE - 1)));
+ (reloc_offset & (PAGE_SIZE - 1)));
reloc_val = target_obj_priv->gtt_offset + reloc.delta;
#if WATCH_BUF
readl(reloc_entry), reloc_val);
#endif
writel(reloc_val, reloc_entry);
+ io_mapping_unmap_atomic(reloc_page);
/* Write the updated presumed offset for this entry back out
* to the user.
drm_gem_object_unreference(target_obj);
}
- if (reloc_page != NULL)
- iounmap(reloc_page);
-
#if WATCH_BUF
if (0)
i915_gem_dump_object(obj, 128, __func__, ~0);
if (ret != 0)
return ret;
+ dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base,
+ dev->agp->agp_info.aper_size
+ * 1024 * 1024);
+
mutex_lock(&dev->struct_mutex);
BUG_ON(!list_empty(&dev_priv->mm.active_list));
BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
ret = i915_gem_idle(dev);
drm_irq_uninstall(dev);
+ io_mapping_free(dev_priv->mm.gtt_mapping);
return ret;
}
RADEON_WRITE(RADEON_SCRATCH_UMSK, 0x7);
/* Turn on bus mastering */
- if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) ||
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) {
- /* rs400, rs690/rs740 */
- tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS400_BUS_MASTER_DIS;
+ /* rs600/rs690/rs740 */
+ tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
RADEON_WRITE(RADEON_BUS_CNTL, tmp);
- } else if (!(((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R423))) {
- /* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) {
+ /* r1xx, r2xx, r300, r(v)350, r420/r481, rs400/rs480 */
tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
RADEON_WRITE(RADEON_BUS_CNTL, tmp);
} /* PCIE cards appears to not need this */
* handling, not bus mastering itself.
*/
#define RADEON_BUS_CNTL 0x0030
-/* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */
+/* r1xx, r2xx, r300, r(v)350, r420/r481, rs400/rs480 */
# define RADEON_BUS_MASTER_DIS (1 << 6)
-/* rs400, rs690/rs740 */
-# define RS400_BUS_MASTER_DIS (1 << 14)
-# define RS400_MSI_REARM (1 << 20)
-/* see RS480_MSI_REARM in AIC_CNTL for rs480 */
+/* rs600/rs690/rs740 */
+# define RS600_BUS_MASTER_DIS (1 << 14)
+# define RS600_MSI_REARM (1 << 20)
+/* see RS400_MSI_REARM in AIC_CNTL for rs480 */
#define RADEON_BUS_CNTL1 0x0034
# define RADEON_PMI_BM_DIS (1 << 2)
#define RADEON_AIC_CNTL 0x01d0
# define RADEON_PCIGART_TRANSLATE_EN (1 << 0)
-# define RS480_MSI_REARM (1 << 3)
+# define RS400_MSI_REARM (1 << 3)
#define RADEON_AIC_STAT 0x01d4
#define RADEON_AIC_PT_BASE 0x01d8
#define RADEON_AIC_LO_ADDR 0x01dc
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
static const struct hid_device_id dell_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
{ }
};
MODULE_DEVICE_TABLE(hid, dell_devices);
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
+#define USB_VENDOR_ID_GENERIC_13BA 0x13ba
+#define USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE 0x0017
+
#define USB_VENDOR_ID_GLAB 0x06c2
#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
#define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_device *dev = interface_to_usbdev(intf);
- struct usbhid_device *usbhid;
+ struct usbhid_device *usbhid = hid->driver_data;
unsigned int n, insize = 0;
int ret;
- WARN_ON(hid->driver_data);
-
- usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL);
- if (usbhid == NULL) {
- ret = -ENOMEM;
- goto err;
- }
-
- hid->driver_data = usbhid;
- usbhid->hid = hid;
-
usbhid->bufsize = HID_MIN_BUFFER_SIZE;
hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
+ mutex_lock(&usbhid->setup);
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
usbhid_init_reports(hid);
hid_dump_device(hid);
+ set_bit(HID_STARTED, &usbhid->iofl);
+ mutex_unlock(&usbhid->setup);
+
return 0;
fail:
usb_free_urb(usbhid->urbout);
usb_free_urb(usbhid->urbctrl);
hid_free_buffers(dev, hid);
- kfree(usbhid);
-err:
+ mutex_unlock(&usbhid->setup);
return ret;
}
if (WARN_ON(!usbhid))
return;
+ mutex_lock(&usbhid->setup);
+ clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
usb_free_urb(usbhid->urbout);
hid_free_buffers(hid_to_usb_dev(hid), hid);
- kfree(usbhid);
- hid->driver_data = NULL;
+ mutex_unlock(&usbhid->setup);
}
static struct hid_ll_driver usb_hid_driver = {
static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usbhid_device *usbhid;
struct hid_device *hid;
size_t len;
int ret;
if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
hid->uniq[0] = 0;
+ usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL);
+ if (usbhid == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ hid->driver_data = usbhid;
+ usbhid->hid = hid;
+ mutex_init(&usbhid->setup); /* needed on suspend/resume */
+
ret = hid_add_device(hid);
if (ret) {
if (ret != -ENODEV)
dev_err(&intf->dev, "can't add hid device: %d\n", ret);
- goto err;
+ goto err_free;
}
return 0;
+err_free:
+ kfree(usbhid);
err:
hid_destroy_device(hid);
return ret;
static void hid_disconnect(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata(intf);
+ struct usbhid_device *usbhid;
if (WARN_ON(!hid))
return;
+ usbhid = hid->driver_data;
hid_destroy_device(hid);
+ kfree(usbhid);
}
static int hid_suspend(struct usb_interface *intf, pm_message_t message)
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
+ mutex_lock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl)) {
+ mutex_unlock(&usbhid->setup);
+ return 0;
+ }
+
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
- del_timer(&usbhid->io_retry);
+ del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
+ mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
struct usbhid_device *usbhid = hid->driver_data;
int status;
+ mutex_lock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl)) {
+ mutex_unlock(&usbhid->setup);
+ return 0;
+ }
+
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid->retry_delay = 0;
status = hid_start_in(hid);
+ mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}
struct hiddev_list *list = file->private_data;
unsigned long flags;
- hiddev_fasync(-1, file, 0);
-
spin_lock_irqsave(&list->hiddev->list_lock, flags);
list_del(&list->node);
spin_unlock_irqrestore(&list->hiddev->list_lock, flags);
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/timer.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
+ struct mutex setup;
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
unsigned long timeout;
int ret;
- if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+ if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
return -EIO;
ret = s3c24xx_i2c_set_master(i2c);
static struct i2c_adapter scx200_i2c_ops = {
.owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.id = I2C_HW_B_SCX200,
.algo_data = &scx200_i2c_data,
.name = "NatSemi SCx200 I2C",
*
* Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
* May be copied or modified under the terms of the GNU General Public License
- * Copyright (C) 2002 Alan Cox <alan@redhat.com>
+ * Copyright (C) 2002 Alan Cox
* ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
* Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* different clocks on read/write. This requires overloading rw_disk and
* other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
* keeping me sane.
- * Alan Cox <alan@redhat.com>
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* - fix the clock turnaround code: it was writing to the wrong ports when
* called for the secondary channel, caching the current clock mode per-
* separate masks.
*/
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
- if ((unsigned long)buf & alignment || rq->data_len & alignment
+ if ((unsigned long)buf & alignment
+ || rq->data_len & q->dma_pad_mask
|| object_is_on_stack(buf))
drive->dma = 0;
}
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1998-2002 Linux ATA Development
* Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat
* Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
static int ide_gd_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
- set_capacity(disk, ide_gd_capacity(idkp->drive));
+ ide_drive_t *drive = idkp->drive;
+
+ if (ide_gd_media_changed(disk))
+ drive->disk_ops->get_capacity(drive);
+
+ set_capacity(disk, ide_gd_capacity(drive));
return 0;
}
/*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat
*
*/
/*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
+ * Portions (C) Copyright 2002 Red Hat Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/*
* Copyright (C) 1997-1998 Mark Lord
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat
*
* Some code was moved here from ide.c, see it for original copyrights.
*/
/*
- * Copyright (C) 2004 Red Hat <alan@redhat.com>
+ * Copyright (C) 2004 Red Hat
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
/*
- * Copyright (C) 2006 Red Hat <alan@redhat.com>
+ * Copyright (C) 2006 Red Hat
*
* May be copied or modified under the terms of the GNU General Public License
*/
/*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
* This code is based on drivers/ide/pci/siimage.c:
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat
* Copyright (C) 2007-2008 MontaVista Software, Inc.
* Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
*
unsigned int sp = (cr >> 4) & 3;
unsigned int clock = gbus_clock / (4 - sp);
unsigned int cycle = 1000000000 / clock;
- unsigned int wt, shwt;
+ unsigned int shwt;
+ int wt;
/* Minimum DIOx- active time */
wt = DIV_ROUND_UP(t->act8b, cycle) - 2;
/* IORDY setup time: 35ns */
- wt = max(wt, DIV_ROUND_UP(35, cycle));
+ wt = max_t(int, wt, DIV_ROUND_UP(35, cycle));
/* actual wait-cycle is max(wt & ~1, 1) */
if (wt > 2 && (wt & 1))
wt++;
/* Address-valid to DIOR/DIOW setup */
shwt = DIV_ROUND_UP(t->setup, cycle);
+ /* -DIOx recovery time (SHWT * 4) and cycle time requirement */
+ while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle)
+ shwt++;
+ if (shwt > 7) {
+ pr_warning("tx4938ide: SHWT violation (%d)\n", shwt);
+ shwt = 7;
+ }
pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n",
ebus_ch, cycle, wt, shwt);
- __raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt,
+ __raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt,
&tx4938_ebuscptr->cr[ebus_ch]);
}
struct resource *res;
struct tx4938ide_platform_info *pdata = pdev->dev.platform_data;
int irq, ret, i;
- unsigned long mapbase;
+ unsigned long mapbase, mapctl;
struct ide_port_info d = tx4938ide_port_info;
irq = platform_get_irq(pdev, 0);
res->end - res->start + 1, "tx4938ide"))
return -EBUSY;
mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
- res->end - res->start + 1);
- if (!mapbase)
+ 8 << pdata->ioport_shift);
+ mapctl = (unsigned long)devm_ioremap(&pdev->dev,
+ res->start + 0x10000 +
+ (6 << pdata->ioport_shift),
+ 1 << pdata->ioport_shift);
+ if (!mapbase || !mapctl)
return -EBUSY;
memset(&hw, 0, sizeof(hw));
if (pdata->ioport_shift) {
unsigned long port = mapbase;
+ unsigned long ctl = mapctl;
hw.io_ports_array[0] = port;
#ifdef __BIG_ENDIAN
port++;
+ ctl++;
#endif
for (i = 1; i <= 7; i++)
hw.io_ports_array[i] =
port + (i << pdata->ioport_shift);
- hw.io_ports.ctl_addr =
- port + 0x10000 + (6 << pdata->ioport_shift);
+ hw.io_ports.ctl_addr = ctl;
} else
- ide_std_init_ports(&hw, mapbase, mapbase + 0x10006);
+ ide_std_init_ports(&hw, mapbase, mapctl);
hw.irq = irq;
hw.dev = &pdev->dev;
- pr_info("TX4938 IDE interface (base %#lx, irq %d)\n", mapbase, hw.irq);
+ pr_info("TX4938 IDE interface (base %#lx, ctl %#lx, irq %d)\n",
+ mapbase, mapctl, hw.irq);
if (pdata->gbus_clock)
tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
else
d.port_ops = NULL;
ret = ide_host_add(&d, hws, &host);
- if (ret)
- return ret;
- platform_set_drvdata(pdev, host);
- return 0;
+ if (!ret)
+ platform_set_drvdata(pdev, host);
+ return ret;
}
static int __exit tx4938ide_remove(struct platform_device *pdev)
/* OK to free the DMA buffer, no more mappings can exist */
do_dv1394_shutdown(video, 1);
- /* clean up async I/O users */
- dv1394_fasync(-1, file, 0);
-
/* give someone else a turn */
clear_bit(0, &video->open);
}
spin_unlock_irq(&file->lock);
- ib_uverbs_event_fasync(-1, filp, 0);
-
if (file->is_async) {
ib_unregister_event_handler(&file->uverbs_file->event_handler);
kref_put(&file->uverbs_file->ref, ib_uverbs_release_file);
evdev_ungrab(evdev, client);
mutex_unlock(&evdev->mutex);
- evdev_fasync(-1, file, 0);
evdev_detach_client(evdev, client);
kfree(client);
struct joydev_client *client = file->private_data;
struct joydev *joydev = client->joydev;
- joydev_fasync(-1, file, 0);
joydev_detach_client(joydev, client);
kfree(client);
static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait);
static int hp_sdc_rtc_open(struct inode *inode, struct file *file);
-static int hp_sdc_rtc_release(struct inode *inode, struct file *file);
static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on);
static int hp_sdc_rtc_read_proc(char *page, char **start, off_t off,
return 0;
}
-static int hp_sdc_rtc_release(struct inode *inode, struct file *file)
-{
- /* Turn off interrupts? */
-
- if (file->f_flags & FASYNC) {
- hp_sdc_rtc_fasync (-1, file, 0);
- }
-
- return 0;
-}
-
static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on)
{
return fasync_helper (fd, filp, on, &hp_sdc_rtc_async_queue);
.poll = hp_sdc_rtc_poll,
.ioctl = hp_sdc_rtc_ioctl,
.open = hp_sdc_rtc_open,
- .release = hp_sdc_rtc_release,
.fasync = hp_sdc_rtc_fasync,
};
struct mousedev_client *client = file->private_data;
struct mousedev *mousedev = client->mousedev;
- mousedev_fasync(-1, file, 0);
mousedev_detach_client(mousedev, client);
kfree(client);
mutex_lock(&serio_raw_mutex);
- serio_raw_fasync(-1, file, 0);
serio_raw_cleanup(serio_raw);
mutex_unlock(&serio_raw_mutex);
offset = DA9030_LED_OFFSET(led->id);
val = led->flags & ~0x87;
val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
- val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */
+ val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */
da903x_write(led->master, DA9030_LED1_CONTROL + offset, val);
break;
case DA9030_ID_VIBRA:
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/kthread.h>
-#include <linux/version.h>
#include <linux/leds.h>
#include <acpi/acpi_drivers.h>
return;
if (!ms->log_failure) {
- while ((bio = bio_list_pop(failures)))
+ while ((bio = bio_list_pop(failures))) {
ms->in_sync = 0;
dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0);
+ }
return;
}
*/
static int register_snapshot(struct dm_snapshot *snap)
{
- struct origin *o;
+ struct origin *o, *new_o;
struct block_device *bdev = snap->origin->bdev;
+ new_o = kmalloc(sizeof(*new_o), GFP_KERNEL);
+ if (!new_o)
+ return -ENOMEM;
+
down_write(&_origins_lock);
o = __lookup_origin(bdev);
- if (!o) {
+ if (o)
+ kfree(new_o);
+ else {
/* New origin */
- o = kmalloc(sizeof(*o), GFP_KERNEL);
- if (!o) {
- up_write(&_origins_lock);
- return -ENOMEM;
- }
+ o = new_o;
/* Initialise the struct */
INIT_LIST_HEAD(&o->snapshots);
struct dm_snap_pending_exception *pe = mempool_alloc(s->pending_pool,
GFP_NOIO);
+ atomic_inc(&s->pending_exceptions_count);
pe->snap = s;
return pe;
static void free_pending_exception(struct dm_snap_pending_exception *pe)
{
- mempool_free(pe, pe->snap->pending_pool);
+ struct dm_snapshot *s = pe->snap;
+
+ mempool_free(pe, s->pending_pool);
+ smp_mb__before_atomic_dec();
+ atomic_dec(&s->pending_exceptions_count);
}
static void insert_completed_exception(struct dm_snapshot *s,
s->valid = 1;
s->active = 0;
+ atomic_set(&s->pending_exceptions_count, 0);
init_rwsem(&s->lock);
spin_lock_init(&s->pe_lock);
s->ti = ti;
/* After this returns there can be no new kcopyd jobs. */
unregister_snapshot(s);
+ while (atomic_read(&s->pending_exceptions_count))
+ yield();
+ /*
+ * Ensure instructions in mempool_destroy aren't reordered
+ * before atomic_read.
+ */
+ smp_mb();
+
#ifdef CONFIG_DM_DEBUG
for (i = 0; i < DM_TRACKED_CHUNK_HASH_SIZE; i++)
BUG_ON(!hlist_empty(&s->tracked_chunk_hash[i]));
mempool_t *pending_pool;
+ atomic_t pending_exceptions_count;
+
struct exception_table pending;
struct exception_table complete;
if (mode == 0) {
mdk_rdev_t *rdev;
struct list_head *tmp;
+ struct block_device *bdev;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
mddev->degraded = 0;
mddev->barriers_work = 0;
mddev->safemode = 0;
+ bdev = bdget_disk(mddev->gendisk, 0);
+ if (bdev) {
+ blkdev_ioctl(bdev, 0, BLKRRPART, 0);
+ bdput(bdev);
+ }
+ kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
} else if (mddev->pers)
printk(KERN_INFO "md: %s switched to read-only mode.\n",
return ret;
}
-static int
-mptctl_release(struct inode *inode, struct file *filep)
-{
- return fasync_helper(-1, filep, 0, &async_queue);
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* MPT ioctl handler
static const struct file_operations mptctl_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .release = mptctl_release,
.fasync = mptctl_fasync,
.unlocked_ioctl = mptctl_ioctl,
#ifdef CONFIG_COMPAT
/**
* i2o_block_open - Open the block device
- * @inode: inode for block device being opened
- * @file: file to open
+ * @bdev: block device being opened
+ * @mode: file open mode
*
* Power up the device, mount and lock the media. This function is called,
* if the block device is opened for access.
/**
* i2o_block_release - Release the I2O block device
- * @inode: inode for block device being released
- * @file: file to close
+ * @disk: gendisk device being released
+ * @mode: file open mode
*
* Unlock and unmount the media, and power down the device. Gets called if
* the block device is closed.
/**
* i2o_block_ioctl - Issue device specific ioctl calls.
- * @inode: inode for block device ioctl
- * @file: file for ioctl
+ * @bdev: block device being opened
+ * @mode: file open mode
* @cmd: ioctl command
* @arg: arg
*
static int cfg_release(struct inode *inode, struct file *file)
{
ulong id = (ulong) file->private_data;
- struct i2o_cfg_info *p1, *p2;
+ struct i2o_cfg_info *p, **q;
unsigned long flags;
lock_kernel();
- p1 = p2 = NULL;
-
spin_lock_irqsave(&i2o_config_lock, flags);
- for (p1 = open_files; p1;) {
- if (p1->q_id == id) {
-
- if (p1->fasync)
- cfg_fasync(-1, file, 0);
- if (p2)
- p2->next = p1->next;
- else
- open_files = p1->next;
-
- kfree(p1);
+ for (q = &open_files; (p = *q) != NULL; q = &p->next) {
+ if (p->q_id == id) {
+ *q = p->next;
+ kfree(p);
break;
}
- p2 = p1;
- p1 = p1->next;
}
spin_unlock_irqrestore(&i2o_config_lock, flags);
unlock_kernel();
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
- depends on ARM
+ depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
help
config MFD_TC6387XB
bool "Support Toshiba TC6387XB"
- depends on ARM
+ depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
help
if (!hdpu_chassis_id)
printk(KERN_WARNING "sky_nexus: "
"Unable to create proc dir entry: sky_chassis_id\n");
- }
return 0;
}
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
obj-$(CONFIG_SGI_XP) += xp.o
xp-y := xp_main.o
xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o
-xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o
xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o
xp-$(CONFIG_X86_64) += xp_uv.o
obj-$(CONFIG_SGI_XP) += xpc.o
xpc-y := xpc_main.o xpc_channel.o xpc_partition.o
xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o
-xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o
xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o
xpc-$(CONFIG_X86_64) += xpc_uv.o
#include <asm/system.h>
#include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */
#define is_shub() ia64_platform_is("sn2")
+#ifdef CONFIG_IA64_SGI_UV
#define is_uv() ia64_platform_is("uv")
+#else
+#define is_uv() 0
+#endif
#endif
#ifdef CONFIG_X86_64
#include <asm/genapic.h>
if (is_shub())
xpc_exit_sn2();
- else
+ else if (is_uv())
xpc_exit_uv();
}
out_1:
if (is_shub())
xpc_exit_sn2();
- else
+ else if (is_uv())
xpc_exit_uv();
return ret;
}
static int sonypi_misc_release(struct inode *inode, struct file *file)
{
- sonypi_misc_fasync(-1, file, 0);
atomic_dec(&sonypi_compat.open_count);
return 0;
}
*/
static int sony_pic_disable(struct acpi_device *device)
{
- if (ACPI_FAILURE(acpi_evaluate_object(device->handle,
- "_DIS", NULL, NULL)))
+ acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL,
+ NULL);
+
+ if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND)
return -ENXIO;
dprintk("Device disabled\n");
static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmci_host *host = mmc_priv(mmc);
+ unsigned long flags;
WARN_ON(host->mrq != NULL);
return;
}
- spin_lock_irq(&host->lock);
+ spin_lock_irqsave(&host->lock, flags);
host->mrq = mrq;
mmci_start_command(host, mrq->cmd, 0);
- spin_unlock_irq(&host->lock);
+ spin_unlock_irqrestore(&host->lock, flags);
}
static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
#include <asm/arch/gpmc.h>
#include <asm/arch/onenand.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/gpmc.h>
#include <asm/arch/pm.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
-static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
+static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
#ifdef EL3_DEBUG
static int el3_debug = EL3_DEBUG;
static int nopnp;
#endif
-static int __init el3_common_init(struct net_device *dev);
+static int __devinit el3_common_init(struct net_device *dev);
static void el3_common_remove(struct net_device *dev);
static ushort id_read_eeprom(int index);
static ushort read_eeprom(int ioaddr, int index);
static int mca_registered;
#endif /* CONFIG_MCA */
-static int __init el3_common_init(struct net_device *dev)
+static int __devinit el3_common_init(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
int err;
If in doubt, say N.
config IGB_DCA
- bool "Enable DCA"
+ bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
source "drivers/net/ixp2000/Kconfig"
will be called ixgbe.
config IXGBE_DCA
- bool
+ bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
config IXGB
tristate "Intel(R) PRO/10GbE support"
will be called myri10ge.
config MYRI10GE_DCA
- bool
+ bool "Direct Cache Access (DCA) Support"
default y
depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
*/
static void amd8111e_free_ring(struct amd8111e_priv* lp)
{
-
- /* Free transmit and receive skbs */
- amd8111e_free_skbs(lp->amd8111e_net_dev);
-
/* Free transmit and receive descriptor rings */
if(lp->rx_ring){
pci_free_consistent(lp->pci_dev,
} while(intr0 & RINT0);
- /* Receive descriptor is empty now */
- spin_lock_irqsave(&lp->lock, flags);
- __netif_rx_complete(dev, napi);
- writel(VAL0|RINTEN0, mmio + INTEN0);
- writel(VAL2 | RDMD0, mmio + CMD0);
- spin_unlock_irqrestore(&lp->lock, flags);
+ if (rx_pkt_limit > 0) {
+ /* Receive descriptor is empty now */
+ spin_lock_irqsave(&lp->lock, flags);
+ __netif_rx_complete(dev, napi);
+ writel(VAL0|RINTEN0, mmio + INTEN0);
+ writel(VAL2 | RDMD0, mmio + CMD0);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
rx_not_empty:
return num_rx_pkt;
amd8111e_disable_interrupt(lp);
amd8111e_stop_chip(lp);
- amd8111e_free_ring(lp);
+
+ /* Free transmit and receive skbs */
+ amd8111e_free_skbs(lp->amd8111e_net_dev);
netif_carrier_off(lp->amd8111e_net_dev);
spin_unlock_irq(&lp->lock);
free_irq(dev->irq, dev);
+ amd8111e_free_ring(lp);
/* Update the statistics before closing */
amd8111e_get_stats(dev);
init_timer(&lp->check_timer);
lp->check_timer.data = (unsigned long)dev;
lp->check_timer.function = at91ether_check_link;
- }
+ } else if (lp->board_data.phy_irq_pin >= 32)
+ gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy");
/* Display ethernet banner */
printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n",
struct net_device *dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(dev);
+ if (lp->board_data.phy_irq_pin >= 32)
+ gpio_free(lp->board_data.phy_irq_pin);
+
unregister_netdev(dev);
free_irq(dev->irq, dev);
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <linux/tcp.h>
-#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/workqueue.h>
if (tpd != ptpd)
memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
- tpd->word2 = (cpu_to_le16(buffer_info->length) &
+ tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT);
+ tpd->word2 |= (cpu_to_le16(buffer_info->length) &
TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;
/*
vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
((vlan_tag >> 9) & 0x8);
ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
- ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) <<
- TPD_VL_TAGGED_SHIFT;
+ ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) <<
+ TPD_VLANTAG_SHIFT;
}
tso = atl1_tso(adapter, skb, ptpd);
#define TPD_PKTNT_MASK 0x0001
#define TPD_PKTINT_SHIFT 15
#define TPD_VLANTAG_MASK 0xFFFF
-#define TPD_VLAN_SHIFT 16
+#define TPD_VLANTAG_SHIFT 16
/* tpd word 3 bits 0:13 */
#define TPD_EOP_MASK 0x0001
static void bnx2x_init_pxp(struct bnx2x *bp)
{
+ u16 devctl;
int r_order, w_order;
u32 val, i;
pci_read_config_word(bp->pdev,
- bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val);
- DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val);
- w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
- r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12);
+ bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+ DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+ w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+ r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
if (r_order > MAX_RD_ORD) {
DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n",
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.45.22"
-#define DRV_MODULE_RELDATE "2008/09/09"
+#define DRV_MODULE_VERSION "1.45.23"
+#define DRV_MODULE_RELDATE "2008/11/03"
#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung */
bnx2x_free_irq(bp);
load_error:
bnx2x_free_mem(bp);
+ bp->port.pmf = 0;
/* TBD we really need to reset the chip
if we want to recover from this */
/* Report UNLOAD_DONE to MCP */
if (!BP_NOMCP(bp))
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ bp->port.pmf = 0;
/* Free SKBs, SGEs, TPA pool and driver internals */
bnx2x_free_skbs(bp);
return -ENOMEM;
}
- netif_carrier_off(dev);
-
bp = netdev_priv(dev);
bp->msglevel = debug;
goto init_one_exit;
}
+ netif_carrier_off(dev);
+
bp->common.name = board_info[ent->driver_data].name;
printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
" IRQ %d, ", dev->name, bp->common.name,
/* clear slave from tx_hashtbl */
tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl;
- index = SLAVE_TLB_INFO(slave).head;
- while (index != TLB_NULL_INDEX) {
- u32 next_index = tx_hash_table[index].next;
- tlb_init_table_entry(&tx_hash_table[index], save_load);
- index = next_index;
+ /* skip this if we've already freed the tx hash table */
+ if (tx_hash_table) {
+ index = SLAVE_TLB_INFO(slave).head;
+ while (index != TLB_NULL_INDEX) {
+ u32 next_index = tx_hash_table[index].next;
+ tlb_init_table_entry(&tx_hash_table[index], save_load);
+ index = next_index;
+ }
}
tlb_init_slave(slave);
unregister_netdevice(bond->dev);
}
+static void bond_destructor(struct net_device *bond_dev)
+{
+ struct bonding *bond = bond_dev->priv;
+
+ if (bond->wq)
+ destroy_workqueue(bond->wq);
+
+ netif_addr_lock_bh(bond_dev);
+ bond_mc_list_destroy(bond);
+ netif_addr_unlock_bh(bond_dev);
+
+ free_netdev(bond_dev);
+}
+
/*
* First release a slave and than destroy the bond if no more slaves iare left.
* Must be under rtnl_lock when this function is called.
continue;
case BOND_LINK_DOWN:
+ if (slave->link_failure_count < UINT_MAX)
+ slave->link_failure_count++;
+
slave->link = BOND_LINK_DOWN;
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
bond_set_mode_ops(bond, bond->params.mode);
- bond_dev->destructor = free_netdev;
+ bond_dev->destructor = bond_destructor;
/* Initialize the device options */
bond_dev->tx_queue_len = 0;
return 0;
}
-/* De-initialize device specific data.
- * Caller must hold rtnl_lock.
- */
-static void bond_deinit(struct net_device *bond_dev)
-{
- struct bonding *bond = bond_dev->priv;
-
- list_del(&bond->bond_list);
-
-#ifdef CONFIG_PROC_FS
- bond_remove_proc_entry(bond);
-#endif
-}
-
static void bond_work_cancel_all(struct bonding *bond)
{
write_lock_bh(&bond->lock);
cancel_delayed_work(&bond->ad_work);
}
+/* De-initialize device specific data.
+ * Caller must hold rtnl_lock.
+ */
+static void bond_deinit(struct net_device *bond_dev)
+{
+ struct bonding *bond = bond_dev->priv;
+
+ list_del(&bond->bond_list);
+
+ bond_work_cancel_all(bond);
+
+#ifdef CONFIG_PROC_FS
+ bond_remove_proc_entry(bond);
+#endif
+}
+
/* Unregister and free all bond devices.
* Caller must hold rtnl_lock.
*/
struct net_device *bond_dev = bond->dev;
bond_work_cancel_all(bond);
- netif_addr_lock_bh(bond_dev);
- bond_mc_list_destroy(bond);
- netif_addr_unlock_bh(bond_dev);
/* Release the bonded slaves */
bond_release_all(bond_dev);
bond_destroy(bond);
#include <linux/skbuff.h>
#include <linux/ethtool.h>
-#include <asm/arch/svinto.h>/* DMA and register descriptions */
+#include <arch/svinto.h>/* DMA and register descriptions */
#include <asm/io.h> /* CRIS_LED_* I/O functions */
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
#include <asm/ethernet.h>
#include <asm/cache.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
//#define ETHDEBUG
#define D(x)
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0094"
+#define DRV_VERSION "EHEA_0095"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
}
}
-static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add)
+static int ehea_update_busmap(unsigned long pfn, unsigned long nr_pages, int add)
{
unsigned long i, start_section, end_section;
+ if (!nr_pages)
+ return 0;
+
if (!ehea_bmap) {
ehea_bmap = kzalloc(sizeof(struct ehea_bmap), GFP_KERNEL);
if (!ehea_bmap)
}
start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE;
- end_section = start_section + ((pgnum * PAGE_SIZE) / EHEA_SECTSIZE);
+ end_section = start_section + ((nr_pages * PAGE_SIZE) / EHEA_SECTSIZE);
/* Mark entries as valid or invalid only; address is assigned later */
for (i = start_section; i < end_section; i++) {
u64 flag;
return ret;
}
-static int ehea_create_busmap_callback(unsigned long pfn,
- unsigned long nr_pages, void *arg)
+static int ehea_is_hugepage(unsigned long pfn)
+{
+ int page_order;
+
+ if (pfn & EHEA_HUGEPAGE_PFN_MASK)
+ return 0;
+
+ page_order = compound_order(pfn_to_page(pfn));
+ if (page_order + PAGE_SHIFT != EHEA_HUGEPAGESHIFT)
+ return 0;
+
+ return 1;
+}
+
+static int ehea_create_busmap_callback(unsigned long initial_pfn,
+ unsigned long total_nr_pages, void *arg)
{
- return ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_ADD_SECT);
+ int ret;
+ unsigned long pfn, start_pfn, end_pfn, nr_pages;
+
+ if ((total_nr_pages * PAGE_SIZE) < EHEA_HUGEPAGE_SIZE)
+ return ehea_update_busmap(initial_pfn, total_nr_pages,
+ EHEA_BUSMAP_ADD_SECT);
+
+ /* Given chunk is >= 16GB -> check for hugepages */
+ start_pfn = initial_pfn;
+ end_pfn = initial_pfn + total_nr_pages;
+ pfn = start_pfn;
+
+ while (pfn < end_pfn) {
+ if (ehea_is_hugepage(pfn)) {
+ /* Add mem found in front of the hugepage */
+ nr_pages = pfn - start_pfn;
+ ret = ehea_update_busmap(start_pfn, nr_pages,
+ EHEA_BUSMAP_ADD_SECT);
+ if (ret)
+ return ret;
+
+ /* Skip the hugepage */
+ pfn += (EHEA_HUGEPAGE_SIZE / PAGE_SIZE);
+ start_pfn = pfn;
+ } else
+ pfn += (EHEA_SECTSIZE / PAGE_SIZE);
+ }
+
+ /* Add mem found behind the hugepage(s) */
+ nr_pages = pfn - start_pfn;
+ return ehea_update_busmap(start_pfn, nr_pages, EHEA_BUSMAP_ADD_SECT);
}
int ehea_create_busmap(void)
#define EHEA_PAGESIZE (1UL << EHEA_PAGESHIFT)
#define EHEA_SECTSIZE (1UL << 24)
#define EHEA_PAGES_PER_SECTION (EHEA_SECTSIZE >> EHEA_PAGESHIFT)
+#define EHEA_HUGEPAGESHIFT 34
+#define EHEA_HUGEPAGE_SIZE (1UL << EHEA_HUGEPAGESHIFT)
+#define EHEA_HUGEPAGE_PFN_MASK ((EHEA_HUGEPAGE_SIZE - 1) >> PAGE_SHIFT)
#if ((1UL << SECTION_SIZE_BITS) < EHEA_SECTSIZE)
#error eHEA module cannot work if kernel sectionsize < ehea sectionsize
ndev->stop = fs_enet_close;
ndev->get_stats = fs_enet_get_stats;
ndev->set_multicast_list = fs_set_multicast_list;
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ ndev->poll_controller = fs_enet_netpoll;
+#endif
if (fpi->use_napi)
netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi,
fpi->napi_weight);
static void fs_enet_netpoll(struct net_device *dev)
{
disable_irq(dev->irq);
- fs_enet_interrupt(dev->irq, dev, NULL);
+ fs_enet_interrupt(dev->irq, dev);
enable_irq(dev->irq);
}
#endif
struct gfar_mii __iomem *regs =
(void __iomem *)&priv->regs->gfar_mii_regs;
int tbipa = gfar_read(&priv->regs->tbipa);
+ struct mii_bus *bus = gfar_get_miibus(priv);
+
+ if (bus)
+ mutex_lock(&bus->mdio_lock);
+
+ /* If the link is already up, we must already be ok, and don't need to
+ * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
+ * everything for us? Resetting it takes the link down and requires
+ * several seconds for it to come back.
+ */
+ if (gfar_local_mdio_read(regs, tbipa, MII_BMSR) & BMSR_LSTATUS)
+ goto done;
/* Single clk mode, mii mode off(for serdes communication) */
gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT);
gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE |
BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
+
+ done:
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
}
static void init_registers(struct net_device *dev)
.remove = gfar_mdio_remove,
};
+static int match_mdio_bus(struct device *dev, void *data)
+{
+ const struct gfar_private *priv = data;
+ const struct platform_device *pdev = to_platform_device(dev);
+
+ return !strcmp(pdev->name, gianfar_mdio_driver.name) &&
+ pdev->id == priv->einfo->mdio_bus;
+}
+
+/* Given a gfar_priv structure, find the mii_bus controlled by this device (not
+ * necessarily the same as the bus the gfar's PHY is on), if one exists.
+ * Normally only the first gianfar controls a mii_bus. */
+struct mii_bus *gfar_get_miibus(const struct gfar_private *priv)
+{
+ /*const*/ struct device *d;
+
+ d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv,
+ match_mdio_bus);
+ return d ? dev_get_drvdata(d) : NULL;
+}
+
int __init gfar_mdio_init(void)
{
return driver_register(&gianfar_mdio_driver);
#ifndef __GIANFAR_MII_H
#define __GIANFAR_MII_H
+struct gfar_private; /* forward ref */
+
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
int regnum, u16 value);
int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum);
+struct mii_bus *gfar_get_miibus(const struct gfar_private *priv);
int __init gfar_mdio_init(void);
void gfar_mdio_exit(void);
#endif /* GIANFAR_PHY_H */
of_device_is_compatible(np, "ibm,emac-440gr"))
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
if (of_device_is_compatible(np, "ibm,emac-405ez")) {
-#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
#else
printk(KERN_ERR "%s: Flow control not disabled!\n",
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
skb->protocol = eth_type_trans(skb,dev);
-#ifdef LOOPBACK_TSO
- if (skb_is_gso(skb)) {
- BUG_ON(skb->protocol != htons(ETH_P_IP));
- BUG_ON(ip_hdr(skb)->protocol != IPPROTO_TCP);
-
- emulate_large_send_offload(skb);
- return 0;
- }
-#endif
dev->last_rx = jiffies;
/* it's OK to use per_cpu_ptr() because BHs are off */
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
-#include <linux/cpumask.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/device.h>
#define QUERY_PORT_ETH_MTU_OFFSET 0x02
#define QUERY_PORT_WIDTH_OFFSET 0x06
#define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07
-#define QUERY_PORT_MAC_OFFSET 0x08
#define QUERY_PORT_MAX_MACVLAN_OFFSET 0x0a
#define QUERY_PORT_MAX_VL_OFFSET 0x0b
+#define QUERY_PORT_MAC_OFFSET 0x10
for (i = 1; i <= dev_cap->num_ports; ++i) {
err = mlx4_cmd_box(dev, 0, mailbox->dma, i, 0, MLX4_CMD_QUERY_PORT,
return 0;
}
- if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
- msecs_to_jiffies(100)))
- return -ETIMEDOUT;
+ if (!smi_is_done(msp)) {
+ wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
+ msecs_to_jiffies(100));
+ if (!smi_is_done(msp))
+ return -ETIMEDOUT;
+ }
return 0;
}
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.4.3-1.371"
+#define MYRI10GE_VERSION_STR "1.4.3-1.375"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
if (tx->req == tx->done) {
tx->queue_active = 0;
put_be32(htonl(1), tx->send_stop);
+ mmiowb();
}
__netif_tx_unlock(dev_queue);
}
if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
tx->queue_active = 1;
put_be32(htonl(1), tx->send_go);
+ mmiowb();
}
tx->pkt_start++;
if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
static int __devinit niu_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- unsigned long niureg_base, niureg_len;
union niu_parent_id parent_id;
struct net_device *dev;
struct niu *np;
dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM);
- niureg_base = pci_resource_start(pdev, 0);
- niureg_len = pci_resource_len(pdev, 0);
-
- np->regs = ioremap_nocache(niureg_base, niureg_len);
+ np->regs = pci_ioremap_bar(pdev, 0);
if (!np->regs) {
dev_err(&pdev->dev, PFX "Cannot map device registers, "
"aborting.\n");
if (skb->len < len)
goto drop;
- po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
- if (!po)
+ if (pskb_trim_rcsum(skb, len))
goto drop;
- if (pskb_trim_rcsum(skb, len))
+ po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
+ if (!po)
goto drop;
return sk_receive_skb(sk_pppox(po), skb, 0);
#else
SMC_PUSH_DATA(lp, buf, len);
dev->trans_start = jiffies;
- dev_kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
#endif
if (!lp->tx_throttle) {
netif_wake_queue(dev);
struct net_device *ndev)
{
struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
- struct smc_local *lp = netdev_priv(ndev);
+ struct smc_local *lp __maybe_unused = netdev_priv(ndev);
if (!res)
return 0;
struct net_device *ndev)
{
struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
- struct smc_local *lp = netdev_priv(ndev);
+ struct smc_local *lp __maybe_unused = netdev_priv(ndev);
if (res)
release_mem_region(res->start, ATTRIB_SIZE);
/* Allocate Tx/Rx descriptor memory */
db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+ if (!db->desc_pool_ptr)
+ goto err_out_res;
db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+ if (!db->buf_pool_ptr)
+ goto err_out_free_desc;
db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
err = register_netdev (dev);
if (err)
- goto err_out_res;
+ goto err_out_free_buf;
printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, "
"%s, irq %d.\n",
return 0;
+err_out_free_buf:
+ pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_free_desc:
+ pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+ db->desc_pool_ptr, db->desc_pool_dma_ptr);
err_out_res:
pci_release_regions(pdev);
err_out_disable:
DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
- tun_chr_fasync(-1, file, 0);
-
rtnl_lock();
/* Detach from net device */
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/types.h>
-#include <asm/uaccess.h>
#include "ucc_geth.h"
#include "ucc_geth_mii.h"
dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
}
+static int dm9601_set_mac_address(struct net_device *net, void *p)
+{
+ struct sockaddr *addr = p;
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ memcpy(net->dev_addr, addr->sa_data, net->addr_len);
+ dm_write_async(dev, DM_PHY_ADDR, net->addr_len, net->dev_addr);
+
+ return 0;
+}
+
static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
dev->net->do_ioctl = dm9601_ioctl;
dev->net->set_multicast_list = dm9601_set_multicast;
+ dev->net->set_mac_address = dm9601_set_mac_address;
dev->net->ethtool_ops = &dm9601_ethtool_ops;
dev->net->hard_header_len += DM_TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
* we don't duplicate code for each option.
*/
-static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, char *devname)
+static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
{
if (val == -1)
*opt = def;
* we don't duplicate code for each option.
*/
-static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, char *devname)
+static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, const char *devname)
{
(*opt) &= (~flag);
if (val == -1)
* for the current device
*/
-static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
+static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
{
velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
static int first = 1;
struct net_device *dev;
int i;
+ const char *drv_string;
const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
struct velocity_info *vptr;
struct mac_regs __iomem * regs;
dev->dev_addr[i] = readb(®s->PAR[i]);
- velocity_get_options(&vptr->options, velocity_nics, dev->name);
+ drv_string = dev_driver_string(&pdev->dev);
+
+ velocity_get_options(&vptr->options, velocity_nics, drv_string);
/*
* Mask out the options cannot be set to the chip
case CISCO_ADDR_REQ:
/* Stolen from net/ipv4/devinet.c -- SIOCGIFADDR ioctl */
{
- struct in_device *in_dev;
- struct in_ifaddr *ifa;
__be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */
#ifdef CONFIG_INET
+ struct in_device *in_dev;
+ struct in_ifaddr *ifa;
+
rcu_read_lock();
if ((in_dev = __in_dev_get_rcu(dev)) != NULL)
{
* z8530_interrupt - Handle an interrupt from a Z8530
* @irq: Interrupt number
* @dev_id: The Z8530 device that is interrupting.
- * @regs: unused
*
* A Z85[2]30 device has stuck its hand in the air for attention.
* We scan both the channels on the chip for events and then call
{
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- int i, err;
+ int err;
pci_restore_state(pdev);
goto err_irq;
ath5k_led_enable(sc);
- /*
- * Reset the key cache since some parts do not
- * reset the contents on initial power up or resume.
- *
- * FIXME: This may need to be revisited when mac80211 becomes
- * aware of suspend/resume.
- */
- for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
- ath5k_hw_reset_key(ah, i);
-
return 0;
err_irq:
free_irq(pdev->irq, sc);
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
u8 mac[ETH_ALEN];
- unsigned int i;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
if (ret > 0)
__set_bit(ATH_STAT_MRRETRY, sc->status);
- /*
- * Reset the key cache since some parts do not
- * reset the contents on initial power up.
- */
- for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
- ath5k_hw_reset_key(ah, i);
-
/*
* Collect the channel list. The 802.11 layer
* is resposible for filtering this list based
static int
ath5k_init(struct ath5k_softc *sc, bool is_resume)
{
- int ret;
+ struct ath5k_hw *ah = sc->ah;
+ int ret, i;
mutex_lock(&sc->lock);
if (ret)
goto done;
+ /*
+ * Reset the key cache since some parts do not reset the
+ * contents on initial power up or resume from suspend.
+ */
+ for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
+ ath5k_hw_reset_key(ah, i);
+
__set_bit(ATH_STAT_STARTED, sc->status);
/* Set ack to be sent at low bit-rates */
- ath5k_hw_set_ack_bitrate_high(sc->ah, false);
+ ath5k_hw_set_ack_bitrate_high(ah, false);
mod_timer(&sc->calib_tim, round_jiffies(jiffies +
msecs_to_jiffies(ath5k_calinterval * 1000)));
sc->opmode != NL80211_IFTYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
- if (sc->opmode == NL80211_IFTYPE_STATION ||
- sc->opmode == NL80211_IFTYPE_ADHOC) {
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
rfilt |= AR5K_RX_FILTER_BEACON;
- }
/* Set filters */
ath5k_hw_set_rx_filter(ah,rfilt);
{ ATH5K_DEBUG_BEACON, "beacon", "beacon handling" },
{ ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" },
{ ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" },
- { ATH5K_DEBUG_LED, "led", "LED mamagement" },
+ { ATH5K_DEBUG_LED, "led", "LED management" },
{ ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" },
{ ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" },
{ ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" },
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ AR5K_PHY(642),
{ 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+ { 0xa228,
+ { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } },
{ 0xa23c,
{ 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } },
};
mdelay(1);
/*
- * Write some more initial register settings
+ * Write some more initial register settings for revised chips
*/
- if (ah->ah_version == AR5K_AR5212) {
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_phy_revision > 0x41) {
ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
if (channel->hw_value == CHANNEL_G)
else
ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
- /* Some bits are disabled here, we know nothing about
- * register 0xa228 yet, most of the times this ends up
- * with a value 0x9b5 -haven't seen any dump with
- * a different value- */
- /* Got this from decompiling binary HAL */
- data = ath5k_hw_reg_read(ah, 0xa228);
- data &= 0xfffffdff;
- ath5k_hw_reg_write(ah, data, 0xa228);
-
- data = ath5k_hw_reg_read(ah, 0xa228);
- data &= 0xfffe03ff;
- ath5k_hw_reg_write(ah, data, 0xa228);
- data = 0;
+ /* Got this from legacy-hal */
+ AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200);
+
+ AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff);
/* Just write 0x9b5 ? */
/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
iwl4965_error_recovery(priv);
iwl_power_update_mode(priv, 1);
- ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
iwl4965_set_mode(priv, priv->iw_mode);
mutex_lock(&priv->mutex);
iwl_alive_start(priv);
mutex_unlock(&priv->mutex);
+ ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
}
static void iwl4965_bg_rf_kill(struct work_struct *work)
if (ret == 0) {
*curlevel = le16_to_cpu(cmd.curlevel);
if (minlevel)
- *minlevel = le16_to_cpu(cmd.minlevel);
+ *minlevel = cmd.minlevel;
if (maxlevel)
- *maxlevel = le16_to_cpu(cmd.maxlevel);
+ *maxlevel = cmd.maxlevel;
}
lbs_deb_leave(LBS_DEB_CMD);
switch (elem->id) {
case MFIE_TYPE_SSID:
- bss->ssid_len = elem->len;
- memcpy(bss->ssid, elem->data, elem->len);
+ bss->ssid_len = min_t(int, 32, elem->len);
+ memcpy(bss->ssid, elem->data, bss->ssid_len);
lbs_deb_scan("got SSID IE: '%s', len %u\n",
escape_essid(bss->ssid, bss->ssid_len),
bss->ssid_len);
void *tmp;
int err;
u8 *end = (u8 *)eeprom + len;
- u16 synth;
+ u16 synth = 0;
DECLARE_MAC_BUF(mac);
wrap = (struct eeprom_pda_wrap *) eeprom;
entry = (void *)entry + (entry_len + 1)*2;
}
- if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) {
+ if (!synth || !priv->iq_autocal || !priv->output_limit ||
+ !priv->curve_data) {
printk(KERN_ERR "p54: not all required entries found in eeprom!\n");
err = -EINVAL;
goto err;
printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy));
}
-static int p54p_open(struct ieee80211_hw *dev)
-{
- struct p54p_priv *priv = dev->priv;
- int err;
-
- init_completion(&priv->boot_comp);
- err = request_irq(priv->pdev->irq, &p54p_interrupt,
- IRQF_SHARED, "p54pci", dev);
- if (err) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(dev->wiphy));
- return err;
- }
-
- memset(priv->ring_control, 0, sizeof(*priv->ring_control));
- err = p54p_upload_firmware(dev);
- if (err) {
- free_irq(priv->pdev->irq, dev);
- return err;
- }
- priv->rx_idx_data = priv->tx_idx_data = 0;
- priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0;
-
- p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data,
- ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data);
-
- p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt,
- ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt);
-
- P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
- P54P_READ(ring_control_base);
- wmb();
- udelay(10);
-
- P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
- P54P_READ(int_enable);
- wmb();
- udelay(10);
-
- P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
- P54P_READ(dev_int);
-
- if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
- printk(KERN_ERR "%s: Cannot boot firmware!\n",
- wiphy_name(dev->wiphy));
- free_irq(priv->pdev->irq, dev);
- return -ETIMEDOUT;
- }
-
- P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
- P54P_READ(int_enable);
- wmb();
- udelay(10);
-
- P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
- P54P_READ(dev_int);
- wmb();
- udelay(10);
-
- return 0;
-}
-
static void p54p_stop(struct ieee80211_hw *dev)
{
struct p54p_priv *priv = dev->priv;
memset(ring_control, 0, sizeof(*ring_control));
}
+static int p54p_open(struct ieee80211_hw *dev)
+{
+ struct p54p_priv *priv = dev->priv;
+ int err;
+
+ init_completion(&priv->boot_comp);
+ err = request_irq(priv->pdev->irq, &p54p_interrupt,
+ IRQF_SHARED, "p54pci", dev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to register IRQ handler\n",
+ wiphy_name(dev->wiphy));
+ return err;
+ }
+
+ memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+ err = p54p_upload_firmware(dev);
+ if (err) {
+ free_irq(priv->pdev->irq, dev);
+ return err;
+ }
+ priv->rx_idx_data = priv->tx_idx_data = 0;
+ priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0;
+
+ p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data,
+ ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data);
+
+ p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt,
+ ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt);
+
+ P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
+ P54P_READ(ring_control_base);
+ wmb();
+ udelay(10);
+
+ P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
+ P54P_READ(int_enable);
+ wmb();
+ udelay(10);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
+ P54P_READ(dev_int);
+
+ if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
+ printk(KERN_ERR "%s: Cannot boot firmware!\n",
+ wiphy_name(dev->wiphy));
+ p54p_stop(dev);
+ return -ETIMEDOUT;
+ }
+
+ P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
+ P54P_READ(int_enable);
+ wmb();
+ udelay(10);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
+ P54P_READ(dev_int);
+ wmb();
+ udelay(10);
+
+ return 0;
+}
+
static int __devinit p54p_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
spin_lock_init(&priv->lock);
tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev);
- p54p_open(dev);
+ err = p54p_open(dev);
+ if (err)
+ goto err_free_common;
err = p54_read_eeprom(dev);
p54p_stop(dev);
if (err)
- goto err_free_desc;
+ goto err_free_common;
err = ieee80211_register_hw(dev);
if (err) {
err_free_common:
p54_free_common(dev);
-
- err_free_desc:
pci_free_consistent(pdev, sizeof(*priv->ring_control),
priv->ring_control, priv->ring_control_dma);
menuconfig RT2X00
- bool "Ralink driver support"
+ tristate "Ralink driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable the experimental support for the Ralink drivers,
int of_device_register(struct of_device *ofdev)
{
BUG_ON(ofdev->node == NULL);
- return device_register(&ofdev->dev);
+
+ device_initialize(&ofdev->dev);
+
+ /* device_add will assume that this device is on the same node as
+ * the parent. If there is no parent defined, set the node
+ * explicitly */
+ if (!ofdev->dev.parent)
+ set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->node));
+
+ return device_add(&ofdev->dev);
}
EXPORT_SYMBOL(of_device_register);
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
- dev_info(&dev->dev,
- "VIA PCI bridge detected. Disabling DAC.\n");
- forbid_dac = 1;
- }
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
static void quirk_passive_release(struct pci_dev *dev)
This driver is also available as a module called m8xx_pcmcia.
-config HD64465_PCMCIA
- tristate "HD64465 host bridge support"
- depends on HD64465 && PCMCIA
-
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
obj-$(CONFIG_I82092) += i82092.o
obj-$(CONFIG_TCIC) += tcic.o
obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
-obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o
obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o
obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
+++ /dev/null
-/*
- * Device driver for the PCMCIA controller module of the
- * Hitachi HD64465 handheld companion chip.
- *
- * Note that the HD64465 provides a very thin PCMCIA host bridge
- * layer, requiring a lot of the work of supporting cards to be
- * performed by the processor. For example: mapping of card
- * interrupts to processor IRQs is done by IRQ demuxing software;
- * IO and memory mappings are fixed; setting voltages according
- * to card Voltage Select pins etc is done in software.
- *
- * Note also that this driver uses only the simple, fixed,
- * 16MB, 16-bit wide mappings to PCMCIA spaces defined by the
- * HD64465. Larger mappings, smaller mappings, or mappings of
- * different width to the same socket, are all possible only by
- * involving the SH7750's MMU, which is considered unnecessary here.
- * The downside is that it may be possible for some drivers to
- * break because they need or expect 8-bit mappings.
- *
- * This driver currently supports only the following configuration:
- * SH7750 CPU, HD64465, TPS2206 voltage control chip.
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <asm/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/hd64465/io.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/ss.h>
-
-#define MODNAME "hd64465_ss"
-
-/* #define HD64465_DEBUG 1 */
-
-#if HD64465_DEBUG
-#define DPRINTK(args...) printk(MODNAME ": " args)
-#else
-#define DPRINTK(args...)
-#endif
-
-extern int hd64465_io_debug;
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-extern void p3_iounmap(void *addr);
-
-/*============================================================*/
-
-#define HS_IO_MAP_SIZE (64*1024)
-
-typedef struct hs_socket_t
-{
- unsigned int number;
- u_int irq;
- u_long mem_base;
- void *io_base;
- u_long mem_length;
- u_int ctrl_base;
- socket_state_t state;
- pccard_io_map io_maps[MAX_IO_WIN];
- pccard_mem_map mem_maps[MAX_WIN];
- struct pcmcia_socket socket;
-} hs_socket_t;
-
-
-
-#define HS_MAX_SOCKETS 2
-static hs_socket_t hs_sockets[HS_MAX_SOCKETS];
-
-#define hs_in(sp, r) inb((sp)->ctrl_base + (r))
-#define hs_out(sp, v, r) outb(v, (sp)->ctrl_base + (r))
-
-
-/* translate a boolean value to a bit in a register */
-#define bool_to_regbit(sp, r, bi, bo) \
- do { \
- unsigned short v = hs_in(sp, r); \
- if (bo) \
- v |= (bi); \
- else \
- v &= ~(bi); \
- hs_out(sp, v, r); \
- } while(0)
-
-/* register offsets from HD64465_REG_PCC[01]ISR */
-#define ISR 0x0
-#define GCR 0x2
-#define CSCR 0x4
-#define CSCIER 0x6
-#define SCR 0x8
-
-
-/* Mask and values for CSCIER register */
-#define IER_MASK 0x80
-#define IER_ON 0x3f /* interrupts on */
-#define IER_OFF 0x00 /* interrupts off */
-
-/*============================================================*/
-
-#if HD64465_DEBUG > 10
-
-static void cis_hex_dump(const unsigned char *x, int len)
-{
- int i;
-
- for (i=0 ; i<len ; i++)
- {
- if (!(i & 0xf))
- printk("\n%08x", (unsigned)(x + i));
- printk(" %02x", *(volatile unsigned short*)x);
- x += 2;
- }
- printk("\n");
-}
-
-#endif
-/*============================================================*/
-
-/*
- * This code helps create the illusion that the IREQ line from
- * the PC card is mapped to one of the CPU's IRQ lines by the
- * host bridge hardware (which is how every host bridge *except*
- * the HD64465 works). In particular, it supports enabling
- * and disabling the IREQ line by code which knows nothing
- * about the host bridge (e.g. device drivers, IDE code) using
- * the request_irq(), free_irq(), probe_irq_on() and probe_irq_off()
- * functions. Also, it supports sharing the mapped IRQ with
- * real hardware IRQs from the -IRL0-3 lines.
- */
-
-#define HS_NUM_MAPPED_IRQS 16 /* Limitation of the PCMCIA code */
-static struct
-{
- /* index is mapped irq number */
- hs_socket_t *sock;
- hw_irq_controller *old_handler;
-} hs_mapped_irq[HS_NUM_MAPPED_IRQS];
-
-static void hs_socket_enable_ireq(hs_socket_t *sp)
-{
- unsigned short cscier;
-
- DPRINTK("hs_socket_enable_ireq(sock=%d)\n", sp->number);
-
- cscier = hs_in(sp, CSCIER);
- cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK;
- cscier |= HD64465_PCCCSCIER_PIREQE_LEVEL;
- hs_out(sp, cscier, CSCIER);
-}
-
-static void hs_socket_disable_ireq(hs_socket_t *sp)
-{
- unsigned short cscier;
-
- DPRINTK("hs_socket_disable_ireq(sock=%d)\n", sp->number);
-
- cscier = hs_in(sp, CSCIER);
- cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK;
- hs_out(sp, cscier, CSCIER);
-}
-
-static unsigned int hs_startup_irq(unsigned int irq)
-{
- hs_socket_enable_ireq(hs_mapped_irq[irq].sock);
- hs_mapped_irq[irq].old_handler->startup(irq);
- return 0;
-}
-
-static void hs_shutdown_irq(unsigned int irq)
-{
- hs_socket_disable_ireq(hs_mapped_irq[irq].sock);
- hs_mapped_irq[irq].old_handler->shutdown(irq);
-}
-
-static void hs_enable_irq(unsigned int irq)
-{
- hs_socket_enable_ireq(hs_mapped_irq[irq].sock);
- hs_mapped_irq[irq].old_handler->enable(irq);
-}
-
-static void hs_disable_irq(unsigned int irq)
-{
- hs_socket_disable_ireq(hs_mapped_irq[irq].sock);
- hs_mapped_irq[irq].old_handler->disable(irq);
-}
-
-extern struct hw_interrupt_type no_irq_type;
-
-static void hs_mask_and_ack_irq(unsigned int irq)
-{
- hs_socket_disable_ireq(hs_mapped_irq[irq].sock);
- /* ack_none() spuriously complains about an unexpected IRQ */
- if (hs_mapped_irq[irq].old_handler != &no_irq_type)
- hs_mapped_irq[irq].old_handler->ack(irq);
-}
-
-static void hs_end_irq(unsigned int irq)
-{
- hs_socket_enable_ireq(hs_mapped_irq[irq].sock);
- hs_mapped_irq[irq].old_handler->end(irq);
-}
-
-
-static struct hw_interrupt_type hd64465_ss_irq_type = {
- .typename = "PCMCIA-IRQ",
- .startup = hs_startup_irq,
- .shutdown = hs_shutdown_irq,
- .enable = hs_enable_irq,
- .disable = hs_disable_irq,
- .ack = hs_mask_and_ack_irq,
- .end = hs_end_irq
-};
-
-/*
- * This function should only ever be called with interrupts disabled.
- */
-static void hs_map_irq(hs_socket_t *sp, unsigned int irq)
-{
- struct irq_desc *desc;
-
- DPRINTK("hs_map_irq(sock=%d irq=%d)\n", sp->number, irq);
-
- if (irq >= HS_NUM_MAPPED_IRQS)
- return;
-
- desc = irq_to_desc(irq);
- hs_mapped_irq[irq].sock = sp;
- /* insert ourselves as the irq controller */
- hs_mapped_irq[irq].old_handler = desc->chip;
- desc->chip = &hd64465_ss_irq_type;
-}
-
-
-/*
- * This function should only ever be called with interrupts disabled.
- */
-static void hs_unmap_irq(hs_socket_t *sp, unsigned int irq)
-{
- struct irq_desc *desc;
-
- DPRINTK("hs_unmap_irq(sock=%d irq=%d)\n", sp->number, irq);
-
- if (irq >= HS_NUM_MAPPED_IRQS)
- return;
-
- desc = irq_to_desc(irq);
- /* restore the original irq controller */
- desc->chip = hs_mapped_irq[irq].old_handler;
-}
-
-/*============================================================*/
-
-
-/*
- * Set Vpp and Vcc (in tenths of a Volt). Does not
- * support the hi-Z state.
- *
- * Note, this assumes the board uses a TPS2206 chip to control
- * the Vcc and Vpp voltages to the hs_sockets. If your board
- * uses the MIC2563 (also supported by the HD64465) then you
- * will have to modify this function.
- */
- /* 0V 3.3V 5.5V */
-static const u_char hs_tps2206_avcc[3] = { 0x00, 0x04, 0x08 };
-static const u_char hs_tps2206_bvcc[3] = { 0x00, 0x80, 0x40 };
-
-static int hs_set_voltages(hs_socket_t *sp, int Vcc, int Vpp)
-{
- u_int psr;
- u_int vcci = 0;
- u_int sock = sp->number;
-
- DPRINTK("hs_set_voltage(%d, %d, %d)\n", sock, Vcc, Vpp);
-
- switch (Vcc)
- {
- case 0: vcci = 0; break;
- case 33: vcci = 1; break;
- case 50: vcci = 2; break;
- default: return 0;
- }
-
- /* Note: Vpp = 120 not supported -- Greg Banks */
- if (Vpp != 0 && Vpp != Vcc)
- return 0;
-
- /* The PSR register holds 8 of the 9 bits which control
- * the TPS2206 via its serial interface.
- */
- psr = inw(HD64465_REG_PCCPSR);
- switch (sock)
- {
- case 0:
- psr &= 0x0f;
- psr |= hs_tps2206_avcc[vcci];
- psr |= (Vpp == 0 ? 0x00 : 0x02);
- break;
- case 1:
- psr &= 0xf0;
- psr |= hs_tps2206_bvcc[vcci];
- psr |= (Vpp == 0 ? 0x00 : 0x20);
- break;
- };
- outw(psr, HD64465_REG_PCCPSR);
-
- return 1;
-}
-
-
-/*============================================================*/
-
-/*
- * Drive the RESET line to the card.
- */
-static void hs_reset_socket(hs_socket_t *sp, int on)
-{
- unsigned short v;
-
- v = hs_in(sp, GCR);
- if (on)
- v |= HD64465_PCCGCR_PCCR;
- else
- v &= ~HD64465_PCCGCR_PCCR;
- hs_out(sp, v, GCR);
-}
-
-/*============================================================*/
-
-static int hs_init(struct pcmcia_socket *s)
-{
- hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
-
- DPRINTK("hs_init(%d)\n", sp->number);
-
- return 0;
-}
-
-/*============================================================*/
-
-
-static int hs_get_status(struct pcmcia_socket *s, u_int *value)
-{
- hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
- unsigned int isr;
- u_int status = 0;
-
-
- isr = hs_in(sp, ISR);
-
- /* Card is seated and powered when *both* CD pins are low */
- if ((isr & HD64465_PCCISR_PCD_MASK) == 0)
- {
- status |= SS_DETECT; /* card present */
-
- switch (isr & HD64465_PCCISR_PBVD_MASK)
- {
- case HD64465_PCCISR_PBVD_BATGOOD:
- break;
- case HD64465_PCCISR_PBVD_BATWARN:
- status |= SS_BATWARN;
- break;
- default:
- status |= SS_BATDEAD;
- break;
- }
-
- if (isr & HD64465_PCCISR_PREADY)
- status |= SS_READY;
-
- if (isr & HD64465_PCCISR_PMWP)
- status |= SS_WRPROT;
-
- /* Voltage Select pins interpreted as per Table 4-5 of the std.
- * Assuming we have the TPS2206, the socket is a "Low Voltage
- * key, 3.3V and 5V available, no X.XV available".
- */
- switch (isr & (HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1))
- {
- case HD64465_PCCISR_PVS1:
- printk(KERN_NOTICE MODNAME ": cannot handle X.XV card, ignored\n");
- status = 0;
- break;
- case 0:
- case HD64465_PCCISR_PVS2:
- /* 3.3V */
- status |= SS_3VCARD;
- break;
- case HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1:
- /* 5V */
- break;
- }
-
- /* TODO: SS_POWERON */
- /* TODO: SS_STSCHG */
- }
-
- DPRINTK("hs_get_status(%d) = %x\n", sock, status);
-
- *value = status;
- return 0;
-}
-
-/*============================================================*/
-
-static int hs_set_socket(struct pcmcia_socket *s, socket_state_t *state)
-{
- hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
- u_long flags;
- u_int changed;
- unsigned short cscier;
-
- DPRINTK("hs_set_socket(sock=%d, flags=%x, csc_mask=%x, Vcc=%d, Vpp=%d, io_irq=%d)\n",
- sock, state->flags, state->csc_mask, state->Vcc, state->Vpp, state->io_irq);
-
- local_irq_save(flags); /* Don't want interrupts happening here */
-
- if (state->Vpp != sp->state.Vpp ||
- state->Vcc != sp->state.Vcc) {
- if (!hs_set_voltages(sp, state->Vcc, state->Vpp)) {
- local_irq_restore(flags);
- return -EINVAL;
- }
- }
-
-/* hd64465_io_debug = 1; */
- /*
- * Handle changes in the Card Status Change mask,
- * by propagating to the CSCR register
- */
- changed = sp->state.csc_mask ^ state->csc_mask;
- cscier = hs_in(sp, CSCIER);
-
- if (changed & SS_DETECT) {
- if (state->csc_mask & SS_DETECT)
- cscier |= HD64465_PCCCSCIER_PCDE;
- else
- cscier &= ~HD64465_PCCCSCIER_PCDE;
- }
-
- if (changed & SS_READY) {
- if (state->csc_mask & SS_READY)
- cscier |= HD64465_PCCCSCIER_PRE;
- else
- cscier &= ~HD64465_PCCCSCIER_PRE;
- }
-
- if (changed & SS_BATDEAD) {
- if (state->csc_mask & SS_BATDEAD)
- cscier |= HD64465_PCCCSCIER_PBDE;
- else
- cscier &= ~HD64465_PCCCSCIER_PBDE;
- }
-
- if (changed & SS_BATWARN) {
- if (state->csc_mask & SS_BATWARN)
- cscier |= HD64465_PCCCSCIER_PBWE;
- else
- cscier &= ~HD64465_PCCCSCIER_PBWE;
- }
-
- if (changed & SS_STSCHG) {
- if (state->csc_mask & SS_STSCHG)
- cscier |= HD64465_PCCCSCIER_PSCE;
- else
- cscier &= ~HD64465_PCCCSCIER_PSCE;
- }
-
- hs_out(sp, cscier, CSCIER);
-
- if (sp->state.io_irq && !state->io_irq)
- hs_unmap_irq(sp, sp->state.io_irq);
- else if (!sp->state.io_irq && state->io_irq)
- hs_map_irq(sp, state->io_irq);
-
-
- /*
- * Handle changes in the flags field,
- * by propagating to config registers.
- */
- changed = sp->state.flags ^ state->flags;
-
- if (changed & SS_IOCARD) {
- DPRINTK("card type: %s\n",
- (state->flags & SS_IOCARD ? "i/o" : "memory" ));
- bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCT,
- state->flags & SS_IOCARD);
- }
-
- if (changed & SS_RESET) {
- DPRINTK("%s reset card\n",
- (state->flags & SS_RESET ? "start" : "stop"));
- bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCR,
- state->flags & SS_RESET);
- }
-
- if (changed & SS_OUTPUT_ENA) {
- DPRINTK("%sabling card output\n",
- (state->flags & SS_OUTPUT_ENA ? "en" : "dis"));
- bool_to_regbit(sp, GCR, HD64465_PCCGCR_PDRV,
- state->flags & SS_OUTPUT_ENA);
- }
-
- /* TODO: SS_SPKR_ENA */
-
-/* hd64465_io_debug = 0; */
- sp->state = *state;
-
- local_irq_restore(flags);
-
-#if HD64465_DEBUG > 10
- if (state->flags & SS_OUTPUT_ENA)
- cis_hex_dump((const unsigned char*)sp->mem_base, 0x100);
-#endif
- return 0;
-}
-
-/*============================================================*/
-
-static int hs_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
-{
- hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
- int map = io->map;
- int sock = sp->number;
- struct pccard_io_map *sio;
- pgprot_t prot;
-
- DPRINTK("hs_set_io_map(sock=%d, map=%d, flags=0x%x, speed=%dns, start=%#lx, stop=%#lx)\n",
- sock, map, io->flags, io->speed, io->start, io->stop);
- if (map >= MAX_IO_WIN)
- return -EINVAL;
- sio = &sp->io_maps[map];
-
- /* check for null changes */
- if (io->flags == sio->flags &&
- io->start == sio->start &&
- io->stop == sio->stop)
- return 0;
-
- if (io->flags & MAP_AUTOSZ)
- prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IODYN);
- else if (io->flags & MAP_16BIT)
- prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO16);
- else
- prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO8);
-
- /* TODO: handle MAP_USE_WAIT */
- if (io->flags & MAP_USE_WAIT)
- printk(KERN_INFO MODNAME ": MAP_USE_WAIT unimplemented\n");
- /* TODO: handle MAP_PREFETCH */
- if (io->flags & MAP_PREFETCH)
- printk(KERN_INFO MODNAME ": MAP_PREFETCH unimplemented\n");
- /* TODO: handle MAP_WRPROT */
- if (io->flags & MAP_WRPROT)
- printk(KERN_INFO MODNAME ": MAP_WRPROT unimplemented\n");
- /* TODO: handle MAP_0WS */
- if (io->flags & MAP_0WS)
- printk(KERN_INFO MODNAME ": MAP_0WS unimplemented\n");
-
- if (io->flags & MAP_ACTIVE) {
- unsigned long pstart, psize, paddrbase;
-
- paddrbase = virt_to_phys((void*)(sp->mem_base + 2 * HD64465_PCC_WINDOW));
- pstart = io->start & PAGE_MASK;
- psize = ((io->stop + PAGE_SIZE) & PAGE_MASK) - pstart;
-
- /*
- * Change PTEs in only that portion of the mapping requested
- * by the caller. This means that most of the time, most of
- * the PTEs in the io_vma will be unmapped and only the bottom
- * page will be mapped. But the code allows for weird cards
- * that might want IO ports > 4K.
- */
- sp->io_base = p3_ioremap(paddrbase + pstart, psize, pgprot_val(prot));
-
- /*
- * Change the mapping used by inb() outb() etc
- */
- hd64465_port_map(io->start,
- io->stop - io->start + 1,
- (unsigned long)sp->io_base + io->start, 0);
- } else {
- hd64465_port_unmap(sio->start, sio->stop - sio->start + 1);
- p3_iounmap(sp->io_base);
- }
-
- *sio = *io;
- return 0;
-}
-
-/*============================================================*/
-
-static int hs_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *mem)
-{
- hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
- struct pccard_mem_map *smem;
- int map = mem->map;
- unsigned long paddr;
-
-#if 0
- DPRINTK("hs_set_mem_map(sock=%d, map=%d, flags=0x%x, card_start=0x%08x)\n",
- sock, map, mem->flags, mem->card_start);
-#endif
-
- if (map >= MAX_WIN)
- return -EINVAL;
- smem = &sp->mem_maps[map];
-
- paddr = sp->mem_base; /* base of Attribute mapping */
- if (!(mem->flags & MAP_ATTRIB))
- paddr += HD64465_PCC_WINDOW; /* base of Common mapping */
- paddr += mem->card_start;
-
- /* Because we specified SS_CAP_STATIC_MAP, we are obliged
- * at this time to report the system address corresponding
- * to the card address requested. This is how Socket Services
- * queries our fixed mapping. I wish this fact had been
- * documented - Greg Banks.
- */
- mem->static_start = paddr;
-
- *smem = *mem;
-
- return 0;
-}
-
-/* TODO: do we need to use the MMU to access Common memory ??? */
-
-/*============================================================*/
-
-/*
- * This function is registered with the HD64465 glue code to do a
- * secondary demux step on the PCMCIA interrupts. It handles
- * mapping the IREQ request from the card to a standard Linux
- * IRQ, as requested by SocketServices.
- */
-static int hs_irq_demux(int irq, void *dev)
-{
- hs_socket_t *sp = dev;
- u_int cscr;
-
- DPRINTK("hs_irq_demux(irq=%d)\n", irq);
-
- if (sp->state.io_irq &&
- (cscr = hs_in(sp, CSCR)) & HD64465_PCCCSCR_PIREQ) {
- cscr &= ~HD64465_PCCCSCR_PIREQ;
- hs_out(sp, cscr, CSCR);
- return sp->state.io_irq;
- }
-
- return irq;
-}
-
-/*============================================================*/
-
-/*
- * Interrupt handling routine.
- */
-
-static irqreturn_t hs_interrupt(int irq, void *dev)
-{
- hs_socket_t *sp = dev;
- u_int events = 0;
- u_int cscr;
-
- cscr = hs_in(sp, CSCR);
-
- DPRINTK("hs_interrupt, cscr=%04x\n", cscr);
-
- /* check for bus-related changes to be reported to Socket Services */
- if (cscr & HD64465_PCCCSCR_PCDC) {
- /* double-check for a 16-bit card, as we don't support CardBus */
- if ((hs_in(sp, ISR) & HD64465_PCCISR_PCD_MASK) != 0) {
- printk(KERN_NOTICE MODNAME
- ": socket %d, card not a supported card type or not inserted correctly\n",
- sp->number);
- /* Don't do the rest unless a card is present */
- cscr &= ~(HD64465_PCCCSCR_PCDC|
- HD64465_PCCCSCR_PRC|
- HD64465_PCCCSCR_PBW|
- HD64465_PCCCSCR_PBD|
- HD64465_PCCCSCR_PSC);
- } else {
- cscr &= ~HD64465_PCCCSCR_PCDC;
- events |= SS_DETECT; /* card insertion or removal */
- }
- }
- if (cscr & HD64465_PCCCSCR_PRC) {
- cscr &= ~HD64465_PCCCSCR_PRC;
- events |= SS_READY; /* ready signal changed */
- }
- if (cscr & HD64465_PCCCSCR_PBW) {
- cscr &= ~HD64465_PCCCSCR_PSC;
- events |= SS_BATWARN; /* battery warning */
- }
- if (cscr & HD64465_PCCCSCR_PBD) {
- cscr &= ~HD64465_PCCCSCR_PSC;
- events |= SS_BATDEAD; /* battery dead */
- }
- if (cscr & HD64465_PCCCSCR_PSC) {
- cscr &= ~HD64465_PCCCSCR_PSC;
- events |= SS_STSCHG; /* STSCHG (status changed) signal */
- }
-
- if (cscr & HD64465_PCCCSCR_PIREQ) {
- cscr &= ~HD64465_PCCCSCR_PIREQ;
-
- /* This should have been dealt with during irq demux */
- printk(KERN_NOTICE MODNAME ": unexpected IREQ from card\n");
- }
-
- hs_out(sp, cscr, CSCR);
-
- if (events)
- pcmcia_parse_events(&sp->socket, events);
-
- return IRQ_HANDLED;
-}
-
-/*============================================================*/
-
-static struct pccard_operations hs_operations = {
- .init = hs_init,
- .get_status = hs_get_status,
- .set_socket = hs_set_socket,
- .set_io_map = hs_set_io_map,
- .set_mem_map = hs_set_mem_map,
-};
-
-static int hs_init_socket(hs_socket_t *sp, int irq, unsigned long mem_base,
- unsigned int ctrl_base)
-{
- unsigned short v;
- int i, err;
-
- memset(sp, 0, sizeof(*sp));
- sp->irq = irq;
- sp->mem_base = mem_base;
- sp->mem_length = 4*HD64465_PCC_WINDOW; /* 16MB */
- sp->ctrl_base = ctrl_base;
-
- for (i=0 ; i<MAX_IO_WIN ; i++)
- sp->io_maps[i].map = i;
- for (i=0 ; i<MAX_WIN ; i++)
- sp->mem_maps[i].map = i;
-
- hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp);
-
- if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0)
- return err;
- if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) {
- sp->mem_base = 0;
- return -ENOMEM;
- }
-
-
- /* According to section 3.2 of the PCMCIA standard, low-voltage
- * capable cards must implement cold insertion, i.e. Vpp and
- * Vcc set to 0 before card is inserted.
- */
- /*hs_set_voltages(sp, 0, 0);*/
-
- /* hi-Z the outputs to the card and set 16MB map mode */
- v = hs_in(sp, GCR);
- v &= ~HD64465_PCCGCR_PCCT; /* memory-only card */
- hs_out(sp, v, GCR);
-
- v = hs_in(sp, GCR);
- v |= HD64465_PCCGCR_PDRV; /* enable outputs to card */
- hs_out(sp, v, GCR);
-
- v = hs_in(sp, GCR);
- v |= HD64465_PCCGCR_PMMOD; /* 16MB mapping mode */
- hs_out(sp, v, GCR);
-
- v = hs_in(sp, GCR);
- /* lowest 16MB of Common */
- v &= ~(HD64465_PCCGCR_PPA25|HD64465_PCCGCR_PPA24);
- hs_out(sp, v, GCR);
-
- hs_reset_socket(sp, 1);
-
- printk(KERN_INFO "HD64465 PCMCIA bridge socket %d at 0x%08lx irq %d\n",
- i, sp->mem_base, sp->irq);
-
- return 0;
-}
-
-static void hs_exit_socket(hs_socket_t *sp)
-{
- unsigned short cscier, gcr;
- unsigned long flags;
-
- local_irq_save(flags);
-
- /* turn off interrupts in hardware */
- cscier = hs_in(sp, CSCIER);
- cscier = (cscier & IER_MASK) | IER_OFF;
- hs_out(sp, cscier, CSCIER);
-
- /* hi-Z the outputs to the card */
- gcr = hs_in(sp, GCR);
- gcr &= HD64465_PCCGCR_PDRV;
- hs_out(sp, gcr, GCR);
-
- /* power the card down */
- hs_set_voltages(sp, 0, 0);
-
- if (sp->mem_base != 0)
- release_mem_region(sp->mem_base, sp->mem_length);
- if (sp->irq != 0) {
- free_irq(sp->irq, hs_interrupt);
- hd64465_unregister_irq_demux(sp->irq);
- }
-
- local_irq_restore(flags);
-}
-
-static struct device_driver hd64465_driver = {
- .name = "hd64465-pcmcia",
- .bus = &platform_bus_type,
- .suspend = pcmcia_socket_dev_suspend,
- .resume = pcmcia_socket_dev_resume,
-};
-
-static struct platform_device hd64465_device = {
- .name = "hd64465-pcmcia",
- .id = 0,
-};
-
-static int __init init_hs(void)
-{
- int i;
- unsigned short v;
-
-/* hd64465_io_debug = 1; */
- if (driver_register(&hd64465_driver))
- return -EINVAL;
-
- /* Wake both sockets out of STANDBY mode */
- /* TODO: wait 15ms */
- v = inw(HD64465_REG_SMSCR);
- v &= ~(HD64465_SMSCR_PC0ST|HD64465_SMSCR_PC1ST);
- outw(v, HD64465_REG_SMSCR);
-
- /* keep power controller out of shutdown mode */
- v = inb(HD64465_REG_PCC0SCR);
- v |= HD64465_PCCSCR_SHDN;
- outb(v, HD64465_REG_PCC0SCR);
-
- /* use serial (TPS2206) power controller */
- v = inb(HD64465_REG_PCC0CSCR);
- v |= HD64465_PCCCSCR_PSWSEL;
- outb(v, HD64465_REG_PCC0CSCR);
-
- /*
- * Setup hs_sockets[] structures and request system resources.
- * TODO: on memory allocation failure, power down the socket
- * before quitting.
- */
- for (i=0; i<HS_MAX_SOCKETS; i++) {
- hs_set_voltages(&hs_sockets[i], 0, 0);
-
- hs_sockets[i].socket.features |= SS_CAP_PCCARD | SS_CAP_STATIC_MAP; /* mappings are fixed in host memory */
- hs_sockets[i].socket.resource_ops = &pccard_static_ops;
- hs_sockets[i].socket.irq_mask = 0xffde;/*0xffff*/ /* IRQs mapped in s/w so can do any, really */
- hs_sockets[i].socket.map_size = HD64465_PCC_WINDOW; /* 16MB fixed window size */
-
- hs_sockets[i].socket.owner = THIS_MODULE;
- hs_sockets[i].socket.ss_entry = &hs_operations;
- }
-
- i = hs_init_socket(&hs_sockets[0],
- HD64465_IRQ_PCMCIA0,
- HD64465_PCC0_BASE,
- HD64465_REG_PCC0ISR);
- if (i < 0) {
- unregister_driver(&hd64465_driver);
- return i;
- }
- i = hs_init_socket(&hs_sockets[1],
- HD64465_IRQ_PCMCIA1,
- HD64465_PCC1_BASE,
- HD64465_REG_PCC1ISR);
- if (i < 0) {
- unregister_driver(&hd64465_driver);
- return i;
- }
-
-/* hd64465_io_debug = 0; */
-
- platform_device_register(&hd64465_device);
-
- for (i=0; i<HS_MAX_SOCKETS; i++) {
- unsigned int ret;
- hs_sockets[i].socket.dev.parent = &hd64465_device.dev;
- hs_sockets[i].number = i;
- ret = pcmcia_register_socket(&hs_sockets[i].socket);
- if (ret && i)
- pcmcia_unregister_socket(&hs_sockets[0].socket);
- }
-
- return 0;
-}
-
-static void __exit exit_hs(void)
-{
- int i;
-
- for (i=0 ; i<HS_MAX_SOCKETS ; i++) {
- pcmcia_unregister_socket(&hs_sockets[i].socket);
- hs_exit_socket(&hs_sockets[i]);
- }
-
- platform_device_unregister(&hd64465_device);
- unregister_driver(&hd64465_driver);
-}
-
-module_init(init_hs);
-module_exit(exit_hs);
-
-/*============================================================*/
-/*END*/
type = 0;
if (s->functions > 1) /* All of this ought to be handled higher up */
type = IRQF_SHARED;
- if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
+ else if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
type = IRQF_SHARED;
+ else printk(KERN_WARNING "pcmcia: Driver needs updating to support IRQ sharing.\n");
#ifdef CONFIG_PCMCIA_PROBE
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/types.h>
-#include <linux/pnp.h>
#include <linux/stat.h>
#include <linux/ctype.h>
#include <linux/slab.h>
int enable_bit;
};
+static inline struct device *to_da903x_dev(struct regulator_dev *rdev)
+{
+ return rdev_get_dev(rdev)->parent->parent;
+}
+
static inline int check_range(struct da903x_regulator_info *info,
int min_uV, int max_uV)
{
int min_uV, int max_uV)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
if (check_range(info, min_uV, max_uV)) {
static int da903x_get_voltage(struct regulator_dev *rdev)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
int ret;
static int da903x_enable(struct regulator_dev *rdev)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
return da903x_set_bits(da9034_dev, info->enable_reg,
1 << info->enable_bit);
static int da903x_disable(struct regulator_dev *rdev)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
return da903x_clr_bits(da9034_dev, info->enable_reg,
1 << info->enable_bit);
static int da903x_is_enabled(struct regulator_dev *rdev)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t reg_val;
int ret;
int min_uV, int max_uV)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+ struct device *da903x_dev = to_da903x_dev(rdev);
uint8_t val, mask;
int ret;
int min_uV, int max_uV)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+ struct device *da903x_dev = to_da903x_dev(rdev);
uint8_t val, mask;
int thresh;
static int da9030_get_ldo14_voltage(struct regulator_dev *rdev)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+ struct device *da903x_dev = to_da903x_dev(rdev);
uint8_t val, mask;
int ret;
int min_uV, int max_uV)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
int ret;
int min_uV, int max_uV)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
if (check_range(info, min_uV, max_uV)) {
static int da9034_get_ldo12_voltage(struct regulator_dev *rdev)
{
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
- struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+ struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
int ret;
if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15)
ri->desc.ops = &da9030_regulator_ldo1_15_ops;
- rdev = regulator_register(&ri->desc, pdev->dev.parent, ri);
+ rdev = regulator_register(&ri->desc, &pdev->dev, ri);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
ri->desc.name);
if (rtc->ops->release)
rtc->ops->release(rtc->dev.parent);
- if (file->f_flags & FASYNC)
- rtc_dev_fasync(-1, file, 0);
-
clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
return 0;
}
.set_time = ds3234_set_time,
};
-static int ds3234_probe(struct spi_device *spi)
+static int __devinit ds3234_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
unsigned char tmp;
return 0;
}
-static int __exit ds3234_remove(struct spi_device *spi)
+static int __devexit ds3234_remove(struct spi_device *spi)
{
struct ds3234 *chip = platform_get_drvdata(spi);
struct rtc_device *rtc = chip->rtc;
dev_dbg(dev, "Century bit is enabled\n");
tm->tm_year += 100; /* one century */
}
+#ifdef CONFIG_SPARC
+ /* Sun SPARC machines count years since 1968 */
+ tm->tm_year += 68;
+#endif
tm->tm_wday = bcd2bin(val & 0x07);
tm->tm_hour = bcd2bin(M48T59_READ(M48T59_HOUR) & 0x3F);
struct m48t59_private *m48t59 = platform_get_drvdata(pdev);
unsigned long flags;
u8 val = 0;
+ int year = tm->tm_year;
+
+#ifdef CONFIG_SPARC
+ /* Sun SPARC machines count years since 1968 */
+ year -= 68;
+#endif
dev_dbg(dev, "RTC set time %04d-%02d-%02d %02d/%02d/%02d\n",
- tm->tm_year + 1900, tm->tm_mon, tm->tm_mday,
+ year + 1900, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
+ if (year < 0)
+ return -EINVAL;
+
spin_lock_irqsave(&m48t59->lock, flags);
/* Issue the WRITE command */
M48T59_SET_BITS(M48T59_CNTL_WRITE, M48T59_CNTL);
M48T59_WRITE((bin2bcd(tm->tm_mday) & 0x3F), M48T59_MDAY);
/* tm_mon is 0-11 */
M48T59_WRITE((bin2bcd(tm->tm_mon + 1) & 0x1F), M48T59_MONTH);
- M48T59_WRITE(bin2bcd(tm->tm_year % 100), M48T59_YEAR);
+ M48T59_WRITE(bin2bcd(year % 100), M48T59_YEAR);
- if (pdata->type == M48T59RTC_TYPE_M48T59 && (tm->tm_year / 100))
+ if (pdata->type == M48T59RTC_TYPE_M48T59 && (year / 100))
val = (M48T59_WDAY_CEB | M48T59_WDAY_CB);
val |= (bin2bcd(tm->tm_wday) & 0x07);
M48T59_WRITE(val, M48T59_WDAY);
M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL);
tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR));
+#ifdef CONFIG_SPARC
+ /* Sun SPARC machines count years since 1968 */
+ tm->tm_year += 68;
+#endif
/* tm_mon is 0-11 */
tm->tm_mon = bcd2bin(M48T59_READ(M48T59_MONTH)) - 1;
struct rtc_time *tm = &alrm->time;
u8 mday, hour, min, sec;
unsigned long flags;
+ int year = tm->tm_year;
+
+#ifdef CONFIG_SPARC
+ /* Sun SPARC machines count years since 1968 */
+ year -= 68;
+#endif
/* If no irq, we don't support ALARM */
if (m48t59->irq == NO_IRQ)
return -EIO;
+ if (year < 0)
+ return -EINVAL;
+
/*
* 0xff means "always match"
*/
spin_unlock_irqrestore(&m48t59->lock, flags);
dev_dbg(dev, "RTC set alarm time %04d-%02d-%02d %02d/%02d/%02d\n",
- tm->tm_year + 1900, tm->tm_mon, tm->tm_mday,
+ year + 1900, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
return 0;
}
s3c_rtc_setfreq(&pdev->dev, 1);
+ device_init_wakeup(&pdev->dev, 1);
+
/* register RTC and exit */
rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops,
#define s3c_rtc_resume NULL
#endif
-static struct platform_driver s3c2410_rtcdrv = {
+static struct platform_driver s3c2410_rtc_driver = {
.probe = s3c_rtc_probe,
.remove = __devexit_p(s3c_rtc_remove),
.suspend = s3c_rtc_suspend,
static int __init s3c_rtc_init(void)
{
printk(banner);
- return platform_driver_register(&s3c2410_rtcdrv);
+ return platform_driver_register(&s3c2410_rtc_driver);
}
static void __exit s3c_rtc_exit(void)
{
- platform_driver_unregister(&s3c2410_rtcdrv);
+ platform_driver_unregister(&s3c2410_rtc_driver);
}
module_init(s3c_rtc_init);
struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
int offset)
{
- int length = skb->len - offset;
+ int length = skb->len;
int length_here;
int element;
char *data;
if (offset >= 0) {
data = skb->data + offset;
+ length -= offset;
first_lap = 0;
}
QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
qeth_set_allowed_threads(card, 0, 1);
- if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD))
- return -ERESTARTSYS;
if (card->read.state == CH_STATE_UP &&
card->write.state == CH_STATE_UP &&
(card->state == CARD_STATE_UP)) {
netif_rx(skb);
break;
case QETH_HEADER_TYPE_OSN:
- skb_push(skb, sizeof(struct qeth_hdr));
- skb_copy_to_linear_data(skb, hdr,
+ if (card->info.type == QETH_CARD_TYPE_OSN) {
+ skb_push(skb, sizeof(struct qeth_hdr));
+ skb_copy_to_linear_data(skb, hdr,
sizeof(struct qeth_hdr));
- len = skb->len;
- card->osn_info.data_cb(skb);
- break;
+ len = skb->len;
+ card->osn_info.data_cb(skb);
+ break;
+ }
+ /* else unknown */
default:
dev_kfree_skb_any(skb);
QETH_DBF_TEXT(TRACE, 3, "inbunkno");
QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1);
- if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) {
- PRINT_WARN("set_online of card %s interrupted by user!\n",
- CARD_BUS_ID(card));
- return -ERESTARTSYS;
- }
-
recover_flag = card->state;
rc = ccw_device_set_online(CARD_RDEV(card));
if (rc) {
if (card->dev && netif_carrier_ok(card->dev))
netif_carrier_off(card->dev);
recover_flag = card->state;
- if (qeth_l2_stop_card(card, recovery_mode) == -ERESTARTSYS) {
- PRINT_WARN("Stopping card %s interrupted by user!\n",
- CARD_BUS_ID(card));
- return -ERESTARTSYS;
- }
+ qeth_l2_stop_card(card, recovery_mode);
rc = ccw_device_set_offline(CARD_DDEV(card));
rc2 = ccw_device_set_offline(CARD_WDEV(card));
rc3 = ccw_device_set_offline(CARD_RDEV(card));
QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
qeth_set_allowed_threads(card, 0, 1);
- if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD))
- return -ERESTARTSYS;
if (card->read.state == CH_STATE_UP &&
card->write.state == CH_STATE_UP &&
(card->state == CARD_STATE_UP)) {
QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1);
- if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) {
- PRINT_WARN("set_online of card %s interrupted by user!\n",
- CARD_BUS_ID(card));
- return -ERESTARTSYS;
- }
recover_flag = card->state;
rc = ccw_device_set_online(CARD_RDEV(card));
if (card->dev && netif_carrier_ok(card->dev))
netif_carrier_off(card->dev);
recover_flag = card->state;
- if (qeth_l3_stop_card(card, recovery_mode) == -ERESTARTSYS) {
- PRINT_WARN("Stopping card %s interrupted by user!\n",
- CARD_BUS_ID(card));
- return -ERESTARTSYS;
- }
+ qeth_l3_stop_card(card, recovery_mode);
rc = ccw_device_set_offline(CARD_DDEV(card));
rc2 = ccw_device_set_offline(CARD_WDEV(card));
rc3 = ccw_device_set_offline(CARD_RDEV(card));
if (!card)
return -EINVAL;
- if (!qeth_is_supported(card, IPA_IPV6))
- return sprintf(buf, "%s\n", "n/a");
-
return qeth_l3_dev_route_show(card, &card->options.route6, buf);
}
if (!card)
return -EINVAL;
- if (!qeth_is_supported(card, IPA_IPV6)) {
- return -EOPNOTSUPP;
- }
-
return qeth_l3_dev_route_store(card, &card->options.route6,
QETH_PROT_IPV6, buf, count);
}
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include "fdomain.h"
+#ifndef PCMCIA
MODULE_AUTHOR("Rickard E. Faith");
MODULE_DESCRIPTION("Future domain SCSI driver");
MODULE_LICENSE("GPL");
+#endif
#define VERSION "$Revision: 5.51 $"
return 0;
}
-/**
- * megasas_mgmt_release - char node "release" entry point
- */
-static int megasas_mgmt_release(struct inode *inode, struct file *filep)
-{
- filep->private_data = NULL;
- fasync_helper(-1, filep, 0, &megasas_async_queue);
-
- return 0;
-}
-
/**
* megasas_mgmt_fasync - Async notifier registration from applications
*
static const struct file_operations megasas_mgmt_fops = {
.owner = THIS_MODULE,
.open = megasas_mgmt_open,
- .release = megasas_mgmt_release,
.fasync = megasas_mgmt_fasync,
.unlocked_ioctl = megasas_mgmt_ioctl,
#ifdef CONFIG_COMPAT
if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp)))
return -ENXIO;
SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name));
- sg_fasync(-1, filp, 0); /* remove filp from async notification list */
if (0 == sg_remove_sfp(sdp, sfp)) { /* Returns 1 when sdp gone */
if (!sdp->detached) {
scsi_device_put(sdp->device);
say Y or M. Otherwise, say N.
config SERIAL_NETX
- bool "NetX serial port support"
+ tristate "NetX serial port support"
depends on ARM && ARCH_NETX
select SERIAL_CORE
help
config SERIAL_NETX_CONSOLE
bool "Console on NetX serial port"
- depends on SERIAL_NETX
+ depends on SERIAL_NETX=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the Hilscher NetX SoC
#include <asm/system.h>
#include <linux/delay.h>
-#include <asm/arch/svinto.h>
+#include <arch/svinto.h>
/* non-arch dependent serial structures are in linux/serial.h */
#include <linux/serial.h>
/* while we keep our own stuff (struct e100_serial) in a local .h file */
#include "crisv10.h"
#include <asm/fasttimer.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
#ifndef CONFIG_ETRAX_FAST_TIMER
#include <linux/circ_buf.h>
#include <asm/termios.h>
#include <asm/dma.h>
-#include <asm/arch/io_interface_mux.h>
+#include <arch/io_interface_mux.h>
/* Software state per channel */
#define SERIAL_NX_MAJOR 204
#define MINOR_START 170
-#ifdef CONFIG_SERIAL_NETX_CONSOLE
-
enum uart_regs {
UART_DR = 0x00,
UART_SR = 0x04,
}
};
+#ifdef CONFIG_SERIAL_NETX_CONSOLE
+
static void netx_console_putchar(struct uart_port *port, int ch)
{
while (readl(port->membase + UART_FR) & FR_BUSY);
}
#endif
-#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \
- defined(__H8300H__) || defined(__H8300S__)
+#if defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
#define sci_init_pins_irda NULL
#endif
-#ifdef SCI_ONLY
-#define sci_init_pins_scif NULL
-#endif
-
-#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
-#endif /* SCIF_ONLY || SCI_AND_SCIF */
static inline int sci_txroom(struct uart_port *port)
{
return;
}
-#ifndef SCI_ONLY
if (port->type == PORT_SCIF)
count = scif_txroom(port);
else
-#endif
count = sci_txroom(port);
do {
} else {
ctrl = sci_in(port, SCSCR);
-#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
}
-#endif
ctrl |= SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
return;
while (1) {
-#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF)
count = scif_rxroom(port);
else
-#endif
count = sci_rxroom(port);
/* Don't copy more bytes than there is room for in the buffer */
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
- unsigned short ssr_status, scr_status;
- struct uart_port *port = ptr;
+ unsigned short ssr_status, scr_status;
+ struct uart_port *port = ptr;
+ irqreturn_t ret = IRQ_NONE;
ssr_status = sci_in(port,SCxSR);
scr_status = sci_in(port,SCSCR);
/* Tx Interrupt */
- if ((ssr_status & 0x0020) && (scr_status & 0x0080))
- sci_tx_interrupt(irq, ptr);
+ if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+ ret = sci_tx_interrupt(irq, ptr);
/* Rx Interrupt */
- if ((ssr_status & 0x0002) && (scr_status & 0x0040))
- sci_rx_interrupt(irq, ptr);
+ if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+ ret = sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
- if ((ssr_status & 0x0080) && (scr_status & 0x0400))
- sci_er_interrupt(irq, ptr);
+ if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+ ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
- if ((ssr_status & 0x0010) && (scr_status & 0x0200))
- sci_br_interrupt(irq, ptr);
+ if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+ ret = sci_br_interrupt(irq, ptr);
- return IRQ_HANDLED;
+ return ret;
}
#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
-#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF)
sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
-#endif
smr_val = sci_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_AND_SCIF
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCIF0 0xA4400000
# define SCIF2 0xA4410000
* SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
#define SCIF_ORER 0x0200 /* overrun error bit */
#elif defined(CONFIG_SH_RTS7751R2D)
+# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
-# define SCI_AND_SCIF
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define PACR 0xa4050100
# define PBCR 0xa4050102
# define SCSCR_INIT(port) 0x3B
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
# define SCSPTR2 0xffe20010 /* 16 bit SCIF */
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
# define PADR 0xA4050120
# define PSDR 0xA405013e
# define PSCR 0xA405011E
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
# define SCIF_BASE_ADDR 0x01030000
# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_H8S2678)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
# define SCSPTR1 0xff924020 /* 16 bit SCIF */
# define SCSPTR2 0xff925020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_OPER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
defined(CONFIG_CPU_SUBTYPE_SH7263)
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
#else
# error CPU subtype not defined
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7091) || \
defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7722) || \
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
# define SCIF_TXROOM_MAX 16
#endif
-#if defined(SCI_ONLY)
-# define SCxSR_TEND(port) SCI_TEND
-# define SCxSR_ERRORS(port) SCI_ERRORS
-# define SCxSR_RDxF(port) SCI_RDRF
-# define SCxSR_TDxE(port) SCI_TDRE
-# define SCxSR_ORER(port) SCI_ORER
-# define SCxSR_FER(port) SCI_FER
-# define SCxSR_PER(port) SCI_PER
-# define SCxSR_BRK(port) 0x00
-# define SCxSR_RDxF_CLEAR(port) 0xbc
-# define SCxSR_ERROR_CLEAR(port) 0xc4
-# define SCxSR_TDxE_CLEAR(port) 0x78
-# define SCxSR_BREAK_CLEAR(port) 0xc4
-#elif defined(SCIF_ONLY)
-# define SCxSR_TEND(port) SCIF_TEND
-# define SCxSR_ERRORS(port) SCIF_ERRORS
-# define SCxSR_RDxF(port) SCIF_RDF
-# define SCxSR_TDxE(port) SCIF_TDFE
+#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
+#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
+#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
+#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
+#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
+#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
+
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port) SCIF_ORER
+# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
#else
-# define SCxSR_ORER(port) 0x0000
+# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
#endif
-# define SCxSR_FER(port) SCIF_FER
-# define SCxSR_PER(port) SCIF_PER
-# define SCxSR_BRK(port) SCIF_BRK
+
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
-# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
-# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3)
-#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 */
-# define SCxSR_RDxF_CLEAR(port) 0x00fc
-# define SCxSR_ERROR_CLEAR(port) 0x0073
-# define SCxSR_TDxE_CLEAR(port) 0x00df
-# define SCxSR_BREAK_CLEAR(port) 0x00e3
-#endif
+# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
+# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
#else
-# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
-# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
-# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
-# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
-# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
-# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
-# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
-# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091) || \
- defined(CONFIG_CPU_SUBTYPE_SH4_202)
+ defined(CONFIG_CPU_SUBTYPE_SH7091)
static inline int sci_rxd_in(struct uart_port *port)
{
-#ifndef SCIF_ONLY
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
-#endif
-#ifndef SCI_ONLY
if (port->mapbase == 0xffe80000)
return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
-#endif
+ return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe80000)
+ return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
- return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
+ return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
}
#elif defined(__H8300H__) || defined(__H8300S__)
static inline int sci_rxd_in(struct uart_port *port)
#include <linux/kernel.h> /* We're doing kernel work */
#include <linux/module.h>
-#include <linux/kernel.h>
#include <linux/slab.h>
#include "bit_operations.h"
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
/* Include-File for the Meilhaus ME-4000 I/O board */
#include "me4000.h"
free_irq(ext_int_context->irq, ext_int_context);
- /* Delete the fasync structure and free memory */
- me4000_ext_int_fasync(0, file_p, 0);
-
/* Mark as unused */
ext_int_context->in_use = 0;
} else {
j->rec_codec = j->play_codec = 0;
j->rec_frame_size = j->play_frame_size = 0;
j->flags.cidsent = j->flags.cidring = 0;
- ixj_fasync(-1, file_p, 0); /* remove from list of async notification */
if(j->cardtype == QTI_LINEJACK && !j->readers && !j->writers) {
ixj_set_port(j, PORT_PSTN);
ret = idev->info->release(idev->info, inode);
module_put(idev->owner);
-
- if (filep->f_flags & FASYNC)
- ret = uio_fasync(-1, filep, 0);
kfree(listener);
return ret;
}
static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
{
- char *buffer;
+ u8 *buffer;
struct device *dev;
int rv;
int n;
/* used when updating an endpoint's URB list */
static DEFINE_SPINLOCK(hcd_urb_list_lock);
+/* used to protect against unlinking URBs after the device is gone */
+static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
+
/* wait queue for synchronous unlinks */
DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
int usb_hcd_unlink_urb (struct urb *urb, int status)
{
struct usb_hcd *hcd;
- int retval;
+ int retval = -EIDRM;
+ unsigned long flags;
- hcd = bus_to_hcd(urb->dev->bus);
- retval = unlink1(hcd, urb, status);
+ /* Prevent the device and bus from going away while
+ * the unlink is carried out. If they are already gone
+ * then urb->use_count must be 0, since disconnected
+ * devices can't have any active URBs.
+ */
+ spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
+ if (atomic_read(&urb->use_count) > 0) {
+ retval = 0;
+ usb_get_dev(urb->dev);
+ }
+ spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
+ if (retval == 0) {
+ hcd = bus_to_hcd(urb->dev->bus);
+ retval = unlink1(hcd, urb, status);
+ usb_put_dev(urb->dev);
+ }
if (retval == 0)
retval = -EINPROGRESS;
hcd->driver->endpoint_disable(hcd, ep);
}
+/* Protect against drivers that try to unlink URBs after the device
+ * is gone, by waiting until all unlinks for @udev are finished.
+ * Since we don't currently track URBs by device, simply wait until
+ * nothing is running in the locked region of usb_hcd_unlink_urb().
+ */
+void usb_hcd_synchronize_unlinks(struct usb_device *udev)
+{
+ spin_lock_irq(&hcd_urb_unlink_lock);
+ spin_unlock_irq(&hcd_urb_unlink_lock);
+}
+
/*-------------------------------------------------------------------------*/
/* called in any context */
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2);
schedule_delayed_work(&hub->init_work,
msecs_to_jiffies(delay));
+
+ /* Suppress autosuspend until init is done */
+ to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
return; /* Continues at init2: below */
} else {
hub_power_on(hub, true);
*/
dev_dbg (&udev->dev, "unregistering device\n");
usb_disable_device(udev, 0);
+ usb_hcd_synchronize_unlinks(udev);
usb_unlock_device(udev);
* indicating that the request has been canceled (rather than any other
* code).
*
+ * Drivers should not call this routine or related routines, such as
+ * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect
+ * method has returned. The disconnect function should synchronize with
+ * a driver's I/O routines to insure that all URB-related activity has
+ * completed before it returns.
+ *
* This request is always asynchronous. Success is indicated by
* returning -EINPROGRESS, at which time the URB will probably not yet
* have been given back to the device driver. When it is eventually
* This routine may not be used in an interrupt context (such as a bottom
* half or a completion handler), or when holding a spinlock, or in other
* situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
*/
void usb_kill_urb(struct urb *urb)
{
* This routine may not be used in an interrupt context (such as a bottom
* half or a completion handler), or when holding a spinlock, or in other
* situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
*/
void usb_poison_urb(struct urb *urb)
{
*
* this allows all outstanding URBs to be killed starting
* from the back of the queue
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
*/
void usb_kill_anchored_urbs(struct usb_anchor *anchor)
{
* this allows all outstanding URBs to be poisoned starting
* from the back of the queue. Newly added URBs will also be
* poisoned
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
*/
void usb_poison_anchored_urbs(struct usb_anchor *anchor)
{
spin_unlock_irq(&anchor->lock);
}
EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
+
/**
* usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse
* @anchor: anchor the requests are bound to
* from the back of the queue. This function is asynchronous.
* The unlinking is just tiggered. It may happen after this
* function has returned.
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
*/
void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
{
* alternatively, all host requests will time out.
*/
- fasync_helper (-1, fd, 0, &dev->fasync);
kfree (dev->buf);
dev->buf = NULL;
put_dev (dev);
if (tty->driver_data)
tty->driver_data = NULL;
tty_port_tty_set(&port->port, NULL);
+ tty_kref_put(tty);
}
}
"Finecam S5",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
+UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
+ "Kyocera",
+ "CONTAX SL300R T*",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
+
/* Reported by Paul Stewart <stewart@wetlogic.net>
* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
return corgi_bl_set_intensity(lcd, intensity);
}
-void corgibl_limit_intensity(int limit)
+void corgi_lcd_limit_intensity(int limit)
{
if (limit)
corgibl_flags |= CORGIBL_BATTLOW;
backlight_update_status(the_corgi_lcd->bl_dev);
}
-EXPORT_SYMBOL(corgibl_limit_intensity);
+EXPORT_SYMBOL(corgi_lcd_limit_intensity);
static struct backlight_ops corgi_bl_ops = {
.get_brightness = corgi_bl_get_intensity,
#endif /* CONFIG_PCI */
#ifdef CONFIG_ZORRO
-static void __devexit cirrusfb_zorro_unmap(struct fb_info *info)
+static void cirrusfb_zorro_unmap(struct fb_info *info)
{
struct cirrusfb_info *cinfo = info->par;
struct zorro_dev *zdev = to_zorro_dev(info->device);
height, width);
}
-static __inline__ void updatescrollmode(struct display *p,
+static void updatescrollmode(struct display *p,
struct fb_info *info,
struct vc_data *vc)
{
case FBIOPUT_CON2FBMAP:
arg = (unsigned long) compat_ptr(arg);
case FBIOBLANK:
- ret = fb_ioctl(file, cmd, arg);
- break;
+ mutex_unlock(&info->lock);
+ return fb_ioctl(file, cmd, arg);
case FBIOGET_FSCREENINFO:
ret = fb_get_fscreeninfo(inode, file, cmd, arg);
#include "iface.h"
#include "viafbdev.h"
#include "chip.h"
-#include "debug.h"
#include "accel.h"
#include "share.h"
#include "dvi.h"
#include "lcd.h"
#include "ioctl.h"
-#include "viamode.h"
#include "via_utility.h"
#include "vt1636.h"
#include "tblDPASetting.h"
#include "tbl1636.h"
-#include "viafbdev.h"
/* External struct*/
*
* Based on wdt.c. Original copyright messages:
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
- * (c) Copyright 1995 Alan Cox <alan@redhat.com>
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
* Based on acquirewdt.c which is based on wdt.c.
* Original copyright messages:
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
- * (c) Copyright 1995 Alan Cox <alan@redhat.com>
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
* Originally based on softdog.c
* Copyright 2006-2007 Analog Devices Inc.
* Copyright 2006-2007 Michele d'Amico
- * Copyright 1996 Alan Cox <alan@redhat.com>
+ * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Based on wdt.c.
* Original copyright messages:
*
- * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
goto err_disable;
}
- BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
- pci_resource_len(esb_pci, 0));
+ BASEADDR = pci_ioremap_bar(esb_pci, 0);
if (BASEADDR == NULL) {
/* Something's wrong here, BASEADDR has to be set */
printk(KERN_ERR PFX "failed to get BASEADDR\n");
* Based on acquirewdt.c which is based on wdt.c.
* Original copyright messages:
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
- * (c) Copyright 1995 Alan Cox <alan@redhat.com>
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * based on softdog.c by Alan Cox <alan@redhat.com>
+ * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
#include <linux/module.h>
* (c) Copyright 2004 ARM Limited
*
* Based on the SoftDog driver:
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* 20030527: George G. Davis <gdavis@mvista.com>
* Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c
* (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- * Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* Copyright (c) 2004 Texas Instruments.
* 1. Modified to support OMAP1610 32-KHz watchdog timer
* Based on source code of the following authors:
* Ken Hollis <kenji@bitgate.com>,
* Lindsay Harris <lindsay@bluegum.com>,
- * Alan Cox <alan@redhat.com>,
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>,
* Matt Domsch <Matt_Domsch@dell.com>,
* Rob Radez <rob@osinvestor.com>
*
*
* Based on source code of the following authors:
* Ken Hollis <kenji@bitgate.com>,
- * Alan Cox <alan@redhat.com>,
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>,
* Matt Domsch <Matt_Domsch@dell.com>,
* Rob Radez <rob@osinvestor.com>,
* Greg Kroah-Hartman <greg@kroah.com>
* based on
* SoftDog 0.05: A Software Watchdog Device
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* S3C2410 Watchdog Timer Support
*
* Based on, softdog.c by Alan Cox,
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Watchdog driver for the SA11x0/PXA2xx
*
* (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- * Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Based on various other watchdog drivers, which are probably all
* loosely based on something Alan Cox wrote years ago.
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Based on acquirewdt.c which is based on wdt.c.
* Original copyright messages:
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
- * (c) Copyright 1995 Alan Cox <alan@redhat.com>
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * based on softdog.c by Alan Cox <alan@redhat.com>
+ * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
#include <linux/module.h>
/*
* SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
*
- * Based on acquirewdt.c by Alan Cox <alan@redhat.com>
+ * Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
* and some other existing drivers
*
* This program is free software; you can redistribute it and/or
/*
* SoftDog 0.07: A Software Watchdog Device
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
- * (c) Copyright 1995 Alan Cox <alan@redhat.com>
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
#include <linux/module.h>
*
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Based on advantechwdt.c which is based on wdt.c.
* Original copyright messages:
*
- * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/*
* Industrial Computer Source WDT500/501 driver
*
- * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* SoftDog 0.05: A Software Watchdog Device
*
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/*
* Industrial Computer Source PCI-WDT500/501 driver
*
- * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- * http://www.redhat.com
+ * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#include <linux/pagemap.h>
#include <linux/highmem.h>
#include <linux/mutex.h>
-#include <linux/highmem.h>
#include <linux/list.h>
#include <linux/sysdev.h>
(when delete of an open file fails we mark the file as "delete-on-close"
in a way that more servers accept, but only if we can first rename the
file to a temporary name). Add experimental support for more safely
-handling fcntl(F_SETLEASE).
+handling fcntl(F_SETLEASE). Convert cifs to using blocking tcp
+sends, and also let tcp autotune the socket send and receive buffers.
+This reduces the number of EAGAIN errors returned by TCP/IP in
+high stress workloads (and the number of retries on socket writes
+when sending large SMBWriteX requests).
Version 1.54
------------
char versionMajor;
char versionMinor;
bool svlocal:1; /* local server or remote */
+ bool noblocksnd; /* use blocking sendmsg */
+ bool noautotune; /* do not autotune send buf sizes */
atomic_t socketUseCount; /* number of open cifs sessions on socket */
atomic_t inFlight; /* number of requests on the wire to server */
#ifdef CONFIG_CIFS_STATS2
extern struct smb_hdr *cifs_small_buf_get(void);
extern void cifs_small_buf_release(void *);
extern int smb_send(struct socket *, struct smb_hdr *,
- unsigned int /* length */ , struct sockaddr *);
+ unsigned int /* length */ , struct sockaddr *, bool);
extern unsigned int _GetXid(void);
extern void _FreeXid(unsigned int);
#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current->fsuid));
__u32 bytes_sent;
__u16 byte_count;
- /* cFYI(1,("write at %lld %d bytes",offset,count));*/
+ /* cFYI(1, ("write at %lld %d bytes", offset, count));*/
if (tcon->ses == NULL)
return -ECONNABORTED;
bool seal:1; /* request transport encryption on share */
bool nodfs:1; /* Do not request DFS, even if available */
bool local_lease:1; /* check leases only on local system, not remote */
+ bool noblocksnd:1;
+ bool noautotune:1;
unsigned int rsize;
unsigned int wsize;
unsigned int sockopt;
static int ipv4_connect(struct sockaddr_in *psin_server,
struct socket **csocket,
char *netb_name,
- char *server_netb_name);
+ char *server_netb_name,
+ bool noblocksnd,
+ bool nosndbuf); /* ipv6 never set sndbuf size */
static int ipv6_connect(struct sockaddr_in6 *psin_server,
- struct socket **csocket);
+ struct socket **csocket, bool noblocksnd);
/*
try_to_freeze();
if (server->protocolType == IPV6) {
rc = ipv6_connect(&server->addr.sockAddr6,
- &server->ssocket);
+ &server->ssocket, server->noautotune);
} else {
rc = ipv4_connect(&server->addr.sockAddr,
&server->ssocket,
server->workstation_RFC1001_name,
- server->server_RFC1001_name);
+ server->server_RFC1001_name,
+ server->noblocksnd, server->noautotune);
}
if (rc) {
cFYI(1, ("reconnect error %d", rc));
/* ignore */
} else if (strnicmp(data, "rw", 2) == 0) {
vol->rw = true;
+ } else if (strnicmp(data, "noblocksend", 11) == 0) {
+ vol->noblocksnd = 1;
+ } else if (strnicmp(data, "noautotune", 10) == 0) {
+ vol->noautotune = 1;
} else if ((strnicmp(data, "suid", 4) == 0) ||
(strnicmp(data, "nosuid", 6) == 0) ||
(strnicmp(data, "exec", 4) == 0) ||
static int
ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket,
- char *netbios_name, char *target_name)
+ char *netbios_name, char *target_name,
+ bool noblocksnd, bool noautotune)
{
int rc = 0;
int connected = 0;
(*csocket)->sk->sk_sndbuf,
(*csocket)->sk->sk_rcvbuf, (*csocket)->sk->sk_rcvtimeo));
(*csocket)->sk->sk_rcvtimeo = 7 * HZ;
+ if (!noblocksnd)
+ (*csocket)->sk->sk_sndtimeo = 3 * HZ;
+
/* make the bufsizes depend on wsize/rsize and max requests */
- if ((*csocket)->sk->sk_sndbuf < (200 * 1024))
- (*csocket)->sk->sk_sndbuf = 200 * 1024;
- if ((*csocket)->sk->sk_rcvbuf < (140 * 1024))
- (*csocket)->sk->sk_rcvbuf = 140 * 1024;
+ if (noautotune) {
+ if ((*csocket)->sk->sk_sndbuf < (200 * 1024))
+ (*csocket)->sk->sk_sndbuf = 200 * 1024;
+ if ((*csocket)->sk->sk_rcvbuf < (140 * 1024))
+ (*csocket)->sk->sk_rcvbuf = 140 * 1024;
+ }
/* send RFC1001 sessinit */
if (psin_server->sin_port == htons(RFC1001_PORT)) {
/* sizeof RFC1002_SESSION_REQUEST with no scope */
smb_buf->smb_buf_length = 0x81000044;
rc = smb_send(*csocket, smb_buf, 0x44,
- (struct sockaddr *)psin_server);
+ (struct sockaddr *)psin_server, noblocksnd);
kfree(ses_init_buf);
msleep(1); /* RFC1001 layer in at least one server
requires very short break before negprot
}
static int
-ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket)
+ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket,
+ bool noblocksnd)
{
int rc = 0;
int connected = 0;
the default. sock_setsockopt not used because it expects
user space buffer */
(*csocket)->sk->sk_rcvtimeo = 7 * HZ;
+ if (!noblocksnd)
+ (*csocket)->sk->sk_sndtimeo = 3 * HZ;
+
return rc;
}
cFYI(1, ("attempting ipv6 connect"));
/* BB should we allow ipv6 on port 139? */
/* other OS never observed in Wild doing 139 with v6 */
- rc = ipv6_connect(&sin_server6, &csocket);
+ rc = ipv6_connect(&sin_server6, &csocket,
+ volume_info.noblocksnd);
} else
rc = ipv4_connect(&sin_server, &csocket,
volume_info.source_rfc1001_name,
- volume_info.target_rfc1001_name);
+ volume_info.target_rfc1001_name,
+ volume_info.noblocksnd,
+ volume_info.noautotune);
if (rc < 0) {
cERROR(1, ("Error connecting to IPv4 socket. "
"Aborting operation"));
sock_release(csocket);
goto out;
} else {
+ srvTcp->noblocksnd = volume_info.noblocksnd;
+ srvTcp->noautotune = volume_info.noautotune;
memcpy(&srvTcp->addr.sockAddr, &sin_server,
sizeof(struct sockaddr_in));
atomic_set(&srvTcp->inFlight, 0);
pTcon = cifs_sb->tcon;
pagevec_init(&lru_pvec, 0);
- cFYI(DBG2, ("rpages: num pages %d", num_pages));
+ cFYI(DBG2, ("rpages: num pages %d", num_pages));
for (i = 0; i < num_pages; ) {
unsigned contig_pages;
struct page *tmp_page;
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (tmprc == 0 && (info_buf_source->UniqueId ==
- info_buf_target->UniqueId))
+ info_buf_target->UniqueId)) {
/* same file, POSIX says that this is a noop */
+ rc = 0;
goto cifs_rename_exit;
+ }
} /* else ... BB we could add the same check for Windows by
checking the UniqueId via FILE_INTERNAL_INFO */
int
smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer,
- unsigned int smb_buf_length, struct sockaddr *sin)
+ unsigned int smb_buf_length, struct sockaddr *sin, bool noblocksnd)
{
int rc = 0;
int i = 0;
smb_msg.msg_namelen = sizeof(struct sockaddr);
smb_msg.msg_control = NULL;
smb_msg.msg_controllen = 0;
- smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; /* BB add more flags?*/
+ if (noblocksnd)
+ smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL;
+ else
+ smb_msg.msg_flags = MSG_NOSIGNAL;
/* smb header is converted in header_assemble. bcc and rest of SMB word
area, and byte area if necessary, is converted to littleendian in
}
static int
-smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec,
- struct sockaddr *sin)
+smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec,
+ struct sockaddr *sin, bool noblocksnd)
{
int rc = 0;
int i = 0;
unsigned int total_len;
int first_vec = 0;
unsigned int smb_buf_length = smb_buffer->smb_buf_length;
+ struct socket *ssocket = server->ssocket;
if (ssocket == NULL)
return -ENOTSOCK; /* BB eventually add reconnect code here */
smb_msg.msg_namelen = sizeof(struct sockaddr);
smb_msg.msg_control = NULL;
smb_msg.msg_controllen = 0;
- smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; /* BB add more flags?*/
+ if (noblocksnd)
+ smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL;
+ else
+ smb_msg.msg_flags = MSG_NOSIGNAL;
/* smb header is converted in header_assemble. bcc and rest of SMB word
area, and byte area if necessary, is converted to littleendian in
if (rc < 0)
break;
- if (rc >= total_len) {
- WARN_ON(rc > total_len);
+ if (rc == total_len) {
+ total_len = 0;
+ break;
+ } else if (rc > total_len) {
+ cERROR(1, ("sent %d requested %d", rc, total_len));
break;
}
if (rc == 0) {
i = 0; /* in case we get ENOSPC on the next send */
}
+ if ((total_len > 0) && (total_len != smb_buf_length + 4)) {
+ cFYI(1, ("partial send (%d remaining), terminating session",
+ total_len));
+ /* If we have only sent part of an SMB then the next SMB
+ could be taken as the remainder of this one. We need
+ to kill the socket so the server throws away the partial
+ SMB */
+ server->tcpStatus = CifsNeedReconnect;
+ }
+
if (rc < 0) {
cERROR(1, ("Error %d sending data on socket to server", rc));
} else
#ifdef CONFIG_CIFS_STATS2
atomic_inc(&ses->server->inSend);
#endif
- rc = smb_send2(ses->server->ssocket, iov, n_vec,
- (struct sockaddr *) &(ses->server->addr.sockAddr));
+ rc = smb_send2(ses->server, iov, n_vec,
+ (struct sockaddr *) &(ses->server->addr.sockAddr),
+ ses->server->noblocksnd);
#ifdef CONFIG_CIFS_STATS2
atomic_dec(&ses->server->inSend);
midQ->when_sent = jiffies;
atomic_inc(&ses->server->inSend);
#endif
rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
- (struct sockaddr *) &(ses->server->addr.sockAddr));
+ (struct sockaddr *) &(ses->server->addr.sockAddr),
+ ses->server->noblocksnd);
#ifdef CONFIG_CIFS_STATS2
atomic_dec(&ses->server->inSend);
midQ->when_sent = jiffies;
return rc;
}
rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
- (struct sockaddr *) &(ses->server->addr.sockAddr));
+ (struct sockaddr *) &(ses->server->addr.sockAddr),
+ ses->server->noblocksnd);
up(&ses->server->tcpSem);
return rc;
}
atomic_inc(&ses->server->inSend);
#endif
rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
- (struct sockaddr *) &(ses->server->addr.sockAddr));
+ (struct sockaddr *) &(ses->server->addr.sockAddr),
+ ses->server->noblocksnd);
#ifdef CONFIG_CIFS_STATS2
atomic_dec(&ses->server->inSend);
midQ->when_sent = jiffies;
/**
* ecryptfs_write_headers_virt
* @page_virt: The virtual address to write the headers to
+ * @max: The size of memory allocated at page_virt
* @size: Set to the number of bytes written by this function
* @crypt_stat: The cryptographic context
* @ecryptfs_dentry: The eCryptfs dentry
*
* Returns zero on success
*/
-static int ecryptfs_write_headers_virt(char *page_virt, size_t *size,
+static int ecryptfs_write_headers_virt(char *page_virt, size_t max,
+ size_t *size,
struct ecryptfs_crypt_stat *crypt_stat,
struct dentry *ecryptfs_dentry)
{
offset += written;
rc = ecryptfs_generate_key_packet_set((page_virt + offset), crypt_stat,
ecryptfs_dentry, &written,
- PAGE_CACHE_SIZE - offset);
+ max - offset);
if (rc)
ecryptfs_printk(KERN_WARNING, "Error generating key packet "
"set; rc = [%d]\n", rc);
goto out;
}
/* Released in this function */
- virt = kzalloc(crypt_stat->num_header_bytes_at_front, GFP_KERNEL);
+ virt = (char *)get_zeroed_page(GFP_KERNEL);
if (!virt) {
printk(KERN_ERR "%s: Out of memory\n", __func__);
rc = -ENOMEM;
goto out;
}
- rc = ecryptfs_write_headers_virt(virt, &size, crypt_stat,
- ecryptfs_dentry);
+ rc = ecryptfs_write_headers_virt(virt, PAGE_CACHE_SIZE, &size,
+ crypt_stat, ecryptfs_dentry);
if (unlikely(rc)) {
printk(KERN_ERR "%s: Error whilst writing headers; rc = [%d]\n",
__func__, rc);
goto out_free;
}
out_free:
- memset(virt, 0, crypt_stat->num_header_bytes_at_front);
- kfree(virt);
+ free_page((unsigned long)virt);
out:
return rc;
}
EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
sb->s_flags |= MS_RDONLY;
EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
- journal_abort(EXT3_SB(sb)->s_journal, -EIO);
+ if (EXT3_SB(sb)->s_journal)
+ journal_abort(EXT3_SB(sb)->s_journal, -EIO);
}
void ext3_warning (struct super_block * sb, const char * function,
{
struct ext3_sb_info *sbi = EXT3_SB(sb);
struct ext3_super_block *es = sbi->s_es;
- int i;
+ int i, err;
ext3_xattr_put_super(sb);
- if (journal_destroy(sbi->s_journal) < 0)
+ err = journal_destroy(sbi->s_journal);
+ sbi->s_journal = NULL;
+ if (err < 0)
ext3_abort(sb, __func__, "Couldn't clean up the journal");
+
if (!(sb->s_flags & MS_RDONLY)) {
EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
es->s_state = cpu_to_le16(sbi->s_mount_state);
return;
}
-int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks)
+/**
+ * ext4_has_free_blocks()
+ * @sbi: in-core super block structure.
+ * @nblocks: number of needed blocks
+ *
+ * Check if filesystem has nblocks free & available for allocation.
+ * On success return 1, return 0 on failure.
+ */
+int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks)
{
- s64 free_blocks, dirty_blocks;
- s64 root_blocks = 0;
+ s64 free_blocks, dirty_blocks, root_blocks;
struct percpu_counter *fbc = &sbi->s_freeblocks_counter;
struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter;
free_blocks = percpu_counter_read_positive(fbc);
dirty_blocks = percpu_counter_read_positive(dbc);
-
- if (!capable(CAP_SYS_RESOURCE) &&
- sbi->s_resuid != current->fsuid &&
- (sbi->s_resgid == 0 || !in_group_p(sbi->s_resgid)))
- root_blocks = ext4_r_blocks_count(sbi->s_es);
+ root_blocks = ext4_r_blocks_count(sbi->s_es);
if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
EXT4_FREEBLOCKS_WATERMARK) {
}
}
/* Check whether we have space after
- * accounting for current dirty blocks
+ * accounting for current dirty blocks & root reserved blocks.
*/
- if (free_blocks < ((root_blocks + nblocks) + dirty_blocks))
- /* we don't have free space */
- return -ENOSPC;
+ if (free_blocks >= ((root_blocks + nblocks) + dirty_blocks))
+ return 1;
+
+ /* Hm, nope. Are (enough) root reserved blocks available? */
+ if (sbi->s_resuid == current->fsuid ||
+ ((sbi->s_resgid != 0) && in_group_p(sbi->s_resgid)) ||
+ capable(CAP_SYS_RESOURCE)) {
+ if (free_blocks >= (nblocks + dirty_blocks))
+ return 1;
+ }
- /* Add the blocks to nblocks */
- percpu_counter_add(dbc, nblocks);
return 0;
}
-/**
- * ext4_has_free_blocks()
- * @sbi: in-core super block structure.
- * @nblocks: number of neeed blocks
- *
- * Check if filesystem has free blocks available for allocation.
- * Return the number of blocks avaible for allocation for this request
- * On success, return nblocks
- */
-ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi,
+int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
s64 nblocks)
{
- s64 free_blocks, dirty_blocks;
- s64 root_blocks = 0;
- struct percpu_counter *fbc = &sbi->s_freeblocks_counter;
- struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter;
-
- free_blocks = percpu_counter_read_positive(fbc);
- dirty_blocks = percpu_counter_read_positive(dbc);
-
- if (!capable(CAP_SYS_RESOURCE) &&
- sbi->s_resuid != current->fsuid &&
- (sbi->s_resgid == 0 || !in_group_p(sbi->s_resgid)))
- root_blocks = ext4_r_blocks_count(sbi->s_es);
-
- if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
- EXT4_FREEBLOCKS_WATERMARK) {
- free_blocks = percpu_counter_sum(fbc);
- dirty_blocks = percpu_counter_sum(dbc);
- }
- if (free_blocks <= (root_blocks + dirty_blocks))
- /* we don't have free space */
+ if (ext4_has_free_blocks(sbi, nblocks)) {
+ percpu_counter_add(&sbi->s_dirtyblocks_counter, nblocks);
return 0;
-
- if (free_blocks - (root_blocks + dirty_blocks) < nblocks)
- return free_blocks - (root_blocks + dirty_blocks);
- return nblocks;
+ } else
+ return -ENOSPC;
}
-
/**
* ext4_should_retry_alloc()
* @sb: super block
ext4_lblk_t iblock, ext4_fsblk_t goal,
unsigned long *count, int *errp);
extern int ext4_claim_free_blocks(struct ext4_sb_info *sbi, s64 nblocks);
-extern ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks);
+extern int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks);
extern void ext4_free_blocks(handle_t *handle, struct inode *inode,
ext4_fsblk_t block, unsigned long count, int metadata);
extern void ext4_free_blocks_sb(handle_t *handle, struct super_block *sb,
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
sb->s_flags |= MS_RDONLY;
EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT;
- jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
+ if (EXT4_SB(sb)->s_journal)
+ jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
}
void ext4_warning(struct super_block *sb, const char *function,
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
- int i;
+ int i, err;
ext4_mb_release(sb);
ext4_ext_release(sb);
ext4_xattr_put_super(sb);
- if (jbd2_journal_destroy(sbi->s_journal) < 0)
- ext4_abort(sb, __func__, "Couldn't clean up the journal");
+ err = jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
+ if (err < 0)
+ ext4_abort(sb, __func__, "Couldn't clean up the journal");
+
if (!(sb->s_flags & MS_RDONLY)) {
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
es->s_state = cpu_to_le16(sbi->s_mount_state);
if (rw == WRITE) {
/*
- * FIXME: blockdev_direct_IO() doesn't use ->prepare_write(),
+ * FIXME: blockdev_direct_IO() doesn't use ->write_begin(),
* so we need to update the ->mmu_private to block boundary.
*
* But we must fill the remaining area or hole by nul for
eventpoll_release(file);
locks_remove_flock(file);
+ if (unlikely(file->f_flags & FASYNC)) {
+ if (file->f_op && file->f_op->fasync)
+ file->f_op->fasync(-1, file, 0);
+ }
if (file->f_op && file->f_op->release)
file->f_op->release(inode, file);
security_file_free(file);
end_requests(fc, &fc->pending);
end_requests(fc, &fc->processing);
spin_unlock(&fc->lock);
- fasync_helper(-1, file, 0, &fc->fasync);
fuse_conn_put(fc);
}
inotify_dev_event_dequeue(dev);
mutex_unlock(&dev->ev_mutex);
- if (file->f_flags & FASYNC)
- inotify_fasync(-1, file, 0);
-
/* free this device: the put matching the get in inotify_init() */
put_inotify_dev(dev);
* int journal_get_undo_access() - Notify intent to modify metadata with non-rewindable consequences
* @handle: transaction
* @bh: buffer to undo
- * @credits: store the number of taken credits here (if not NULL)
*
* Sometimes there is a need to distinguish between metadata which has
* been committed to disk and that which has not. The ext3fs code uses
journal->j_committing_transaction = NULL;
spin_unlock(&journal->j_state_lock);
+ if (journal->j_commit_callback)
+ journal->j_commit_callback(journal, commit_transaction);
+
if (commit_transaction->t_checkpoint_list == NULL &&
commit_transaction->t_checkpoint_io_list == NULL) {
__jbd2_journal_drop_transaction(journal, commit_transaction);
}
spin_unlock(&journal->j_list_lock);
- if (journal->j_commit_callback)
- journal->j_commit_callback(journal, commit_transaction);
-
trace_mark(jbd2_end_commit, "dev %s transaction %d head %d",
- journal->j_devname, commit_transaction->t_tid,
+ journal->j_devname, journal->j_commit_sequence,
journal->j_tail_sequence);
jbd_debug(1, "JBD: commit %d complete, head %d\n",
journal->j_commit_sequence, journal->j_tail_sequence);
EXPORT_SYMBOL(simple_link);
EXPORT_SYMBOL(simple_lookup);
EXPORT_SYMBOL(simple_pin_fs);
-EXPORT_SYMBOL(simple_prepare_write);
+EXPORT_UNUSED_SYMBOL(simple_prepare_write);
EXPORT_SYMBOL(simple_readpage);
EXPORT_SYMBOL(simple_release_fs);
EXPORT_SYMBOL(simple_rename);
* reclaim all locks we hold on this server.
*/
memset(&saddr, 0, sizeof(saddr));
+ saddr.sin_family = AF_INET;
saddr.sin_addr.s_addr = argp->addr;
nlm_host_rebooted(&saddr, argp->mon, argp->len, argp->state);
* reclaim all locks we hold on this server.
*/
memset(&saddr, 0, sizeof(saddr));
+ saddr.sin_family = AF_INET;
saddr.sin_addr.s_addr = argp->addr;
nlm_host_rebooted(&saddr, argp->mon, argp->len, argp->state);
return nfs_size_to_loff_t(fattr->size) > i_size_read(inode);
}
-static unsigned long nfs_attr_generation_counter;
+static atomic_long_t nfs_attr_generation_counter;
static unsigned long nfs_read_attr_generation_counter(void)
{
- smp_rmb();
- return nfs_attr_generation_counter;
+ return atomic_long_read(&nfs_attr_generation_counter);
}
unsigned long nfs_inc_attr_generation_counter(void)
{
- unsigned long ret;
- smp_rmb();
- ret = ++nfs_attr_generation_counter;
- smp_wmb();
- return ret;
+ return atomic_long_inc_return(&nfs_attr_generation_counter);
}
void nfs_fattr_init(struct nfs_fattr *fattr)
de = (struct buffered_dirent *)((char *)de + reclen);
}
offset = vfs_llseek(file, 0, SEEK_CUR);
+ cdp->err = nfserr_eof;
if (!buf.full)
break;
}
/* Some parts of this taken from generic_cont_expand, which turned out
* to be too fragile to do exactly what we need without us having to
- * worry about recursive locking in ->prepare_write() and
- * ->commit_write(). */
+ * worry about recursive locking in ->write_begin() and ->write_end(). */
static int ocfs2_write_zero_page(struct inode *inode,
u64 size)
{
static int
pipe_read_release(struct inode *inode, struct file *filp)
{
- pipe_read_fasync(-1, filp, 0);
return pipe_release(inode, 1, 0);
}
static int
pipe_write_release(struct inode *inode, struct file *filp)
{
- pipe_write_fasync(-1, filp, 0);
return pipe_release(inode, 0, 1);
}
{
int decr, decw;
- pipe_rdwr_fasync(-1, filp, 0);
decr = (filp->f_mode & FMODE_READ) != 0;
decw = (filp->f_mode & FMODE_WRITE) != 0;
return pipe_release(inode, decr, decw);
-#include <linux/fs.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
-#include <linux/seq_file.h>
#include <linux/time.h>
#include <asm/cputime.h>
-static int uptime_proc_show(struct seq_file *m, void *v)
+static int proc_calc_metrics(char *page, char **start, off_t off,
+ int count, int *eof, int len)
+{
+ if (len <= off + count)
+ *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+ return len;
+}
+
+static int uptime_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
{
struct timespec uptime;
struct timespec idle;
+ int len;
cputime_t idletime = cputime_add(init_task.utime, init_task.stime);
do_posix_clock_monotonic_gettime(&uptime);
monotonic_to_bootbased(&uptime);
cputime_to_timespec(idletime, &idle);
- seq_printf(m, "%lu.%02lu %lu.%02lu\n",
+ len = sprintf(page, "%lu.%02lu %lu.%02lu\n",
(unsigned long) uptime.tv_sec,
(uptime.tv_nsec / (NSEC_PER_SEC / 100)),
(unsigned long) idle.tv_sec,
(idle.tv_nsec / (NSEC_PER_SEC / 100)));
- return 0;
+ return proc_calc_metrics(page, start, off, count, eof, len);
}
-static int uptime_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, uptime_proc_show, NULL);
-}
-
-static const struct file_operations uptime_proc_fops = {
- .open = uptime_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
static int __init proc_uptime_init(void)
{
- proc_create("uptime", 0, NULL, &uptime_proc_fops);
+ create_proc_read_entry("uptime", 0, NULL, uptime_read_proc, NULL);
return 0;
}
module_init(proc_uptime_init);
};
/*
- * The actor worker might be calling ->prepare_write and
- * ->commit_write. Most of the time, these expect i_mutex to
+ * The actor worker might be calling ->write_begin and
+ * ->write_end. Most of the time, these expect i_mutex to
* be held. Since this may result in an ABBA deadlock with
* pipe->inode, we have to order lock acquiry here.
*/
+++ /dev/null
-#ifndef _ASM_CRIS_ARCH_ARBITER_H
-#define _ASM_CRIS_ARCH_ARBITER_H
-
-#define EXT_REGION 0
-#define INT_REGION 1
-
-typedef void (watch_callback)(void);
-
-enum
-{
- arbiter_all_dmas = 0x3ff,
- arbiter_cpu = 0xc00,
- arbiter_all_clients = 0x3fff
-};
-
-enum
-{
- arbiter_all_read = 0x55,
- arbiter_all_write = 0xaa,
- arbiter_all_accesses = 0xff
-};
-
-int crisv32_arbiter_allocate_bandwidth(int client, int region,
- unsigned long bandwidth);
-int crisv32_arbiter_watch(unsigned long start, unsigned long size,
- unsigned long clients, unsigned long accesses,
- watch_callback* cb);
-int crisv32_arbiter_unwatch(int id);
-
-#endif
+++ /dev/null
-#ifndef __pinmux_defs_asm_h
-#define __pinmux_defs_asm_h
-
-/*
- * This file is autogenerated from
- * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r
- * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp
- * last modfied: Mon Apr 11 16:09:11 2005
- *
- * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r
- * id: $Id: pinmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
- * Any changes here will be lost.
- *
- * -*- buffer-read-only: t -*-
- */
-
-#ifndef REG_FIELD
-#define REG_FIELD( scope, reg, field, value ) \
- REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
-#define REG_FIELD_X_( value, shift ) ((value) << shift)
-#endif
-
-#ifndef REG_STATE
-#define REG_STATE( scope, reg, field, symbolic_value ) \
- REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
-#define REG_STATE_X_( k, shift ) (k << shift)
-#endif
-
-#ifndef REG_MASK
-#define REG_MASK( scope, reg, field ) \
- REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
-#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
-#endif
-
-#ifndef REG_LSB
-#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
-#endif
-
-#ifndef REG_BIT
-#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
-#endif
-
-#ifndef REG_ADDR
-#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
-#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
-#endif
-
-#ifndef REG_ADDR_VECT
-#define REG_ADDR_VECT( scope, inst, reg, index ) \
- REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
- STRIDE_##scope##_##reg )
-#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
- ((inst) + offs + (index) * stride)
-#endif
-
-/* Register rw_pa, scope pinmux, type rw */
-#define reg_pinmux_rw_pa___pa0___lsb 0
-#define reg_pinmux_rw_pa___pa0___width 1
-#define reg_pinmux_rw_pa___pa0___bit 0
-#define reg_pinmux_rw_pa___pa1___lsb 1
-#define reg_pinmux_rw_pa___pa1___width 1
-#define reg_pinmux_rw_pa___pa1___bit 1
-#define reg_pinmux_rw_pa___pa2___lsb 2
-#define reg_pinmux_rw_pa___pa2___width 1
-#define reg_pinmux_rw_pa___pa2___bit 2
-#define reg_pinmux_rw_pa___pa3___lsb 3
-#define reg_pinmux_rw_pa___pa3___width 1
-#define reg_pinmux_rw_pa___pa3___bit 3
-#define reg_pinmux_rw_pa___pa4___lsb 4
-#define reg_pinmux_rw_pa___pa4___width 1
-#define reg_pinmux_rw_pa___pa4___bit 4
-#define reg_pinmux_rw_pa___pa5___lsb 5
-#define reg_pinmux_rw_pa___pa5___width 1
-#define reg_pinmux_rw_pa___pa5___bit 5
-#define reg_pinmux_rw_pa___pa6___lsb 6
-#define reg_pinmux_rw_pa___pa6___width 1
-#define reg_pinmux_rw_pa___pa6___bit 6
-#define reg_pinmux_rw_pa___pa7___lsb 7
-#define reg_pinmux_rw_pa___pa7___width 1
-#define reg_pinmux_rw_pa___pa7___bit 7
-#define reg_pinmux_rw_pa___csp2_n___lsb 8
-#define reg_pinmux_rw_pa___csp2_n___width 1
-#define reg_pinmux_rw_pa___csp2_n___bit 8
-#define reg_pinmux_rw_pa___csp3_n___lsb 9
-#define reg_pinmux_rw_pa___csp3_n___width 1
-#define reg_pinmux_rw_pa___csp3_n___bit 9
-#define reg_pinmux_rw_pa___csp5_n___lsb 10
-#define reg_pinmux_rw_pa___csp5_n___width 1
-#define reg_pinmux_rw_pa___csp5_n___bit 10
-#define reg_pinmux_rw_pa___csp6_n___lsb 11
-#define reg_pinmux_rw_pa___csp6_n___width 1
-#define reg_pinmux_rw_pa___csp6_n___bit 11
-#define reg_pinmux_rw_pa___hsh4___lsb 12
-#define reg_pinmux_rw_pa___hsh4___width 1
-#define reg_pinmux_rw_pa___hsh4___bit 12
-#define reg_pinmux_rw_pa___hsh5___lsb 13
-#define reg_pinmux_rw_pa___hsh5___width 1
-#define reg_pinmux_rw_pa___hsh5___bit 13
-#define reg_pinmux_rw_pa___hsh6___lsb 14
-#define reg_pinmux_rw_pa___hsh6___width 1
-#define reg_pinmux_rw_pa___hsh6___bit 14
-#define reg_pinmux_rw_pa___hsh7___lsb 15
-#define reg_pinmux_rw_pa___hsh7___width 1
-#define reg_pinmux_rw_pa___hsh7___bit 15
-#define reg_pinmux_rw_pa_offset 0
-
-/* Register rw_hwprot, scope pinmux, type rw */
-#define reg_pinmux_rw_hwprot___ser1___lsb 0
-#define reg_pinmux_rw_hwprot___ser1___width 1
-#define reg_pinmux_rw_hwprot___ser1___bit 0
-#define reg_pinmux_rw_hwprot___ser2___lsb 1
-#define reg_pinmux_rw_hwprot___ser2___width 1
-#define reg_pinmux_rw_hwprot___ser2___bit 1
-#define reg_pinmux_rw_hwprot___ser3___lsb 2
-#define reg_pinmux_rw_hwprot___ser3___width 1
-#define reg_pinmux_rw_hwprot___ser3___bit 2
-#define reg_pinmux_rw_hwprot___sser0___lsb 3
-#define reg_pinmux_rw_hwprot___sser0___width 1
-#define reg_pinmux_rw_hwprot___sser0___bit 3
-#define reg_pinmux_rw_hwprot___sser1___lsb 4
-#define reg_pinmux_rw_hwprot___sser1___width 1
-#define reg_pinmux_rw_hwprot___sser1___bit 4
-#define reg_pinmux_rw_hwprot___ata0___lsb 5
-#define reg_pinmux_rw_hwprot___ata0___width 1
-#define reg_pinmux_rw_hwprot___ata0___bit 5
-#define reg_pinmux_rw_hwprot___ata1___lsb 6
-#define reg_pinmux_rw_hwprot___ata1___width 1
-#define reg_pinmux_rw_hwprot___ata1___bit 6
-#define reg_pinmux_rw_hwprot___ata2___lsb 7
-#define reg_pinmux_rw_hwprot___ata2___width 1
-#define reg_pinmux_rw_hwprot___ata2___bit 7
-#define reg_pinmux_rw_hwprot___ata3___lsb 8
-#define reg_pinmux_rw_hwprot___ata3___width 1
-#define reg_pinmux_rw_hwprot___ata3___bit 8
-#define reg_pinmux_rw_hwprot___ata___lsb 9
-#define reg_pinmux_rw_hwprot___ata___width 1
-#define reg_pinmux_rw_hwprot___ata___bit 9
-#define reg_pinmux_rw_hwprot___eth1___lsb 10
-#define reg_pinmux_rw_hwprot___eth1___width 1
-#define reg_pinmux_rw_hwprot___eth1___bit 10
-#define reg_pinmux_rw_hwprot___eth1_mgm___lsb 11
-#define reg_pinmux_rw_hwprot___eth1_mgm___width 1
-#define reg_pinmux_rw_hwprot___eth1_mgm___bit 11
-#define reg_pinmux_rw_hwprot___timer___lsb 12
-#define reg_pinmux_rw_hwprot___timer___width 1
-#define reg_pinmux_rw_hwprot___timer___bit 12
-#define reg_pinmux_rw_hwprot___p21___lsb 13
-#define reg_pinmux_rw_hwprot___p21___width 1
-#define reg_pinmux_rw_hwprot___p21___bit 13
-#define reg_pinmux_rw_hwprot_offset 4
-
-/* Register rw_pb_gio, scope pinmux, type rw */
-#define reg_pinmux_rw_pb_gio___pb0___lsb 0
-#define reg_pinmux_rw_pb_gio___pb0___width 1
-#define reg_pinmux_rw_pb_gio___pb0___bit 0
-#define reg_pinmux_rw_pb_gio___pb1___lsb 1
-#define reg_pinmux_rw_pb_gio___pb1___width 1
-#define reg_pinmux_rw_pb_gio___pb1___bit 1
-#define reg_pinmux_rw_pb_gio___pb2___lsb 2
-#define reg_pinmux_rw_pb_gio___pb2___width 1
-#define reg_pinmux_rw_pb_gio___pb2___bit 2
-#define reg_pinmux_rw_pb_gio___pb3___lsb 3
-#define reg_pinmux_rw_pb_gio___pb3___width 1
-#define reg_pinmux_rw_pb_gio___pb3___bit 3
-#define reg_pinmux_rw_pb_gio___pb4___lsb 4
-#define reg_pinmux_rw_pb_gio___pb4___width 1
-#define reg_pinmux_rw_pb_gio___pb4___bit 4
-#define reg_pinmux_rw_pb_gio___pb5___lsb 5
-#define reg_pinmux_rw_pb_gio___pb5___width 1
-#define reg_pinmux_rw_pb_gio___pb5___bit 5
-#define reg_pinmux_rw_pb_gio___pb6___lsb 6
-#define reg_pinmux_rw_pb_gio___pb6___width 1
-#define reg_pinmux_rw_pb_gio___pb6___bit 6
-#define reg_pinmux_rw_pb_gio___pb7___lsb 7
-#define reg_pinmux_rw_pb_gio___pb7___width 1
-#define reg_pinmux_rw_pb_gio___pb7___bit 7
-#define reg_pinmux_rw_pb_gio___pb8___lsb 8
-#define reg_pinmux_rw_pb_gio___pb8___width 1
-#define reg_pinmux_rw_pb_gio___pb8___bit 8
-#define reg_pinmux_rw_pb_gio___pb9___lsb 9
-#define reg_pinmux_rw_pb_gio___pb9___width 1
-#define reg_pinmux_rw_pb_gio___pb9___bit 9
-#define reg_pinmux_rw_pb_gio___pb10___lsb 10
-#define reg_pinmux_rw_pb_gio___pb10___width 1
-#define reg_pinmux_rw_pb_gio___pb10___bit 10
-#define reg_pinmux_rw_pb_gio___pb11___lsb 11
-#define reg_pinmux_rw_pb_gio___pb11___width 1
-#define reg_pinmux_rw_pb_gio___pb11___bit 11
-#define reg_pinmux_rw_pb_gio___pb12___lsb 12
-#define reg_pinmux_rw_pb_gio___pb12___width 1
-#define reg_pinmux_rw_pb_gio___pb12___bit 12
-#define reg_pinmux_rw_pb_gio___pb13___lsb 13
-#define reg_pinmux_rw_pb_gio___pb13___width 1
-#define reg_pinmux_rw_pb_gio___pb13___bit 13
-#define reg_pinmux_rw_pb_gio___pb14___lsb 14
-#define reg_pinmux_rw_pb_gio___pb14___width 1
-#define reg_pinmux_rw_pb_gio___pb14___bit 14
-#define reg_pinmux_rw_pb_gio___pb15___lsb 15
-#define reg_pinmux_rw_pb_gio___pb15___width 1
-#define reg_pinmux_rw_pb_gio___pb15___bit 15
-#define reg_pinmux_rw_pb_gio___pb16___lsb 16
-#define reg_pinmux_rw_pb_gio___pb16___width 1
-#define reg_pinmux_rw_pb_gio___pb16___bit 16
-#define reg_pinmux_rw_pb_gio___pb17___lsb 17
-#define reg_pinmux_rw_pb_gio___pb17___width 1
-#define reg_pinmux_rw_pb_gio___pb17___bit 17
-#define reg_pinmux_rw_pb_gio_offset 8
-
-/* Register rw_pb_iop, scope pinmux, type rw */
-#define reg_pinmux_rw_pb_iop___pb0___lsb 0
-#define reg_pinmux_rw_pb_iop___pb0___width 1
-#define reg_pinmux_rw_pb_iop___pb0___bit 0
-#define reg_pinmux_rw_pb_iop___pb1___lsb 1
-#define reg_pinmux_rw_pb_iop___pb1___width 1
-#define reg_pinmux_rw_pb_iop___pb1___bit 1
-#define reg_pinmux_rw_pb_iop___pb2___lsb 2
-#define reg_pinmux_rw_pb_iop___pb2___width 1
-#define reg_pinmux_rw_pb_iop___pb2___bit 2
-#define reg_pinmux_rw_pb_iop___pb3___lsb 3
-#define reg_pinmux_rw_pb_iop___pb3___width 1
-#define reg_pinmux_rw_pb_iop___pb3___bit 3
-#define reg_pinmux_rw_pb_iop___pb4___lsb 4
-#define reg_pinmux_rw_pb_iop___pb4___width 1
-#define reg_pinmux_rw_pb_iop___pb4___bit 4
-#define reg_pinmux_rw_pb_iop___pb5___lsb 5
-#define reg_pinmux_rw_pb_iop___pb5___width 1
-#define reg_pinmux_rw_pb_iop___pb5___bit 5
-#define reg_pinmux_rw_pb_iop___pb6___lsb 6
-#define reg_pinmux_rw_pb_iop___pb6___width 1
-#define reg_pinmux_rw_pb_iop___pb6___bit 6
-#define reg_pinmux_rw_pb_iop___pb7___lsb 7
-#define reg_pinmux_rw_pb_iop___pb7___width 1
-#define reg_pinmux_rw_pb_iop___pb7___bit 7
-#define reg_pinmux_rw_pb_iop___pb8___lsb 8
-#define reg_pinmux_rw_pb_iop___pb8___width 1
-#define reg_pinmux_rw_pb_iop___pb8___bit 8
-#define reg_pinmux_rw_pb_iop___pb9___lsb 9
-#define reg_pinmux_rw_pb_iop___pb9___width 1
-#define reg_pinmux_rw_pb_iop___pb9___bit 9
-#define reg_pinmux_rw_pb_iop___pb10___lsb 10
-#define reg_pinmux_rw_pb_iop___pb10___width 1
-#define reg_pinmux_rw_pb_iop___pb10___bit 10
-#define reg_pinmux_rw_pb_iop___pb11___lsb 11
-#define reg_pinmux_rw_pb_iop___pb11___width 1
-#define reg_pinmux_rw_pb_iop___pb11___bit 11
-#define reg_pinmux_rw_pb_iop___pb12___lsb 12
-#define reg_pinmux_rw_pb_iop___pb12___width 1
-#define reg_pinmux_rw_pb_iop___pb12___bit 12
-#define reg_pinmux_rw_pb_iop___pb13___lsb 13
-#define reg_pinmux_rw_pb_iop___pb13___width 1
-#define reg_pinmux_rw_pb_iop___pb13___bit 13
-#define reg_pinmux_rw_pb_iop___pb14___lsb 14
-#define reg_pinmux_rw_pb_iop___pb14___width 1
-#define reg_pinmux_rw_pb_iop___pb14___bit 14
-#define reg_pinmux_rw_pb_iop___pb15___lsb 15
-#define reg_pinmux_rw_pb_iop___pb15___width 1
-#define reg_pinmux_rw_pb_iop___pb15___bit 15
-#define reg_pinmux_rw_pb_iop___pb16___lsb 16
-#define reg_pinmux_rw_pb_iop___pb16___width 1
-#define reg_pinmux_rw_pb_iop___pb16___bit 16
-#define reg_pinmux_rw_pb_iop___pb17___lsb 17
-#define reg_pinmux_rw_pb_iop___pb17___width 1
-#define reg_pinmux_rw_pb_iop___pb17___bit 17
-#define reg_pinmux_rw_pb_iop_offset 12
-
-/* Register rw_pc_gio, scope pinmux, type rw */
-#define reg_pinmux_rw_pc_gio___pc0___lsb 0
-#define reg_pinmux_rw_pc_gio___pc0___width 1
-#define reg_pinmux_rw_pc_gio___pc0___bit 0
-#define reg_pinmux_rw_pc_gio___pc1___lsb 1
-#define reg_pinmux_rw_pc_gio___pc1___width 1
-#define reg_pinmux_rw_pc_gio___pc1___bit 1
-#define reg_pinmux_rw_pc_gio___pc2___lsb 2
-#define reg_pinmux_rw_pc_gio___pc2___width 1
-#define reg_pinmux_rw_pc_gio___pc2___bit 2
-#define reg_pinmux_rw_pc_gio___pc3___lsb 3
-#define reg_pinmux_rw_pc_gio___pc3___width 1
-#define reg_pinmux_rw_pc_gio___pc3___bit 3
-#define reg_pinmux_rw_pc_gio___pc4___lsb 4
-#define reg_pinmux_rw_pc_gio___pc4___width 1
-#define reg_pinmux_rw_pc_gio___pc4___bit 4
-#define reg_pinmux_rw_pc_gio___pc5___lsb 5
-#define reg_pinmux_rw_pc_gio___pc5___width 1
-#define reg_pinmux_rw_pc_gio___pc5___bit 5
-#define reg_pinmux_rw_pc_gio___pc6___lsb 6
-#define reg_pinmux_rw_pc_gio___pc6___width 1
-#define reg_pinmux_rw_pc_gio___pc6___bit 6
-#define reg_pinmux_rw_pc_gio___pc7___lsb 7
-#define reg_pinmux_rw_pc_gio___pc7___width 1
-#define reg_pinmux_rw_pc_gio___pc7___bit 7
-#define reg_pinmux_rw_pc_gio___pc8___lsb 8
-#define reg_pinmux_rw_pc_gio___pc8___width 1
-#define reg_pinmux_rw_pc_gio___pc8___bit 8
-#define reg_pinmux_rw_pc_gio___pc9___lsb 9
-#define reg_pinmux_rw_pc_gio___pc9___width 1
-#define reg_pinmux_rw_pc_gio___pc9___bit 9
-#define reg_pinmux_rw_pc_gio___pc10___lsb 10
-#define reg_pinmux_rw_pc_gio___pc10___width 1
-#define reg_pinmux_rw_pc_gio___pc10___bit 10
-#define reg_pinmux_rw_pc_gio___pc11___lsb 11
-#define reg_pinmux_rw_pc_gio___pc11___width 1
-#define reg_pinmux_rw_pc_gio___pc11___bit 11
-#define reg_pinmux_rw_pc_gio___pc12___lsb 12
-#define reg_pinmux_rw_pc_gio___pc12___width 1
-#define reg_pinmux_rw_pc_gio___pc12___bit 12
-#define reg_pinmux_rw_pc_gio___pc13___lsb 13
-#define reg_pinmux_rw_pc_gio___pc13___width 1
-#define reg_pinmux_rw_pc_gio___pc13___bit 13
-#define reg_pinmux_rw_pc_gio___pc14___lsb 14
-#define reg_pinmux_rw_pc_gio___pc14___width 1
-#define reg_pinmux_rw_pc_gio___pc14___bit 14
-#define reg_pinmux_rw_pc_gio___pc15___lsb 15
-#define reg_pinmux_rw_pc_gio___pc15___width 1
-#define reg_pinmux_rw_pc_gio___pc15___bit 15
-#define reg_pinmux_rw_pc_gio___pc16___lsb 16
-#define reg_pinmux_rw_pc_gio___pc16___width 1
-#define reg_pinmux_rw_pc_gio___pc16___bit 16
-#define reg_pinmux_rw_pc_gio___pc17___lsb 17
-#define reg_pinmux_rw_pc_gio___pc17___width 1
-#define reg_pinmux_rw_pc_gio___pc17___bit 17
-#define reg_pinmux_rw_pc_gio_offset 16
-
-/* Register rw_pc_iop, scope pinmux, type rw */
-#define reg_pinmux_rw_pc_iop___pc0___lsb 0
-#define reg_pinmux_rw_pc_iop___pc0___width 1
-#define reg_pinmux_rw_pc_iop___pc0___bit 0
-#define reg_pinmux_rw_pc_iop___pc1___lsb 1
-#define reg_pinmux_rw_pc_iop___pc1___width 1
-#define reg_pinmux_rw_pc_iop___pc1___bit 1
-#define reg_pinmux_rw_pc_iop___pc2___lsb 2
-#define reg_pinmux_rw_pc_iop___pc2___width 1
-#define reg_pinmux_rw_pc_iop___pc2___bit 2
-#define reg_pinmux_rw_pc_iop___pc3___lsb 3
-#define reg_pinmux_rw_pc_iop___pc3___width 1
-#define reg_pinmux_rw_pc_iop___pc3___bit 3
-#define reg_pinmux_rw_pc_iop___pc4___lsb 4
-#define reg_pinmux_rw_pc_iop___pc4___width 1
-#define reg_pinmux_rw_pc_iop___pc4___bit 4
-#define reg_pinmux_rw_pc_iop___pc5___lsb 5
-#define reg_pinmux_rw_pc_iop___pc5___width 1
-#define reg_pinmux_rw_pc_iop___pc5___bit 5
-#define reg_pinmux_rw_pc_iop___pc6___lsb 6
-#define reg_pinmux_rw_pc_iop___pc6___width 1
-#define reg_pinmux_rw_pc_iop___pc6___bit 6
-#define reg_pinmux_rw_pc_iop___pc7___lsb 7
-#define reg_pinmux_rw_pc_iop___pc7___width 1
-#define reg_pinmux_rw_pc_iop___pc7___bit 7
-#define reg_pinmux_rw_pc_iop___pc8___lsb 8
-#define reg_pinmux_rw_pc_iop___pc8___width 1
-#define reg_pinmux_rw_pc_iop___pc8___bit 8
-#define reg_pinmux_rw_pc_iop___pc9___lsb 9
-#define reg_pinmux_rw_pc_iop___pc9___width 1
-#define reg_pinmux_rw_pc_iop___pc9___bit 9
-#define reg_pinmux_rw_pc_iop___pc10___lsb 10
-#define reg_pinmux_rw_pc_iop___pc10___width 1
-#define reg_pinmux_rw_pc_iop___pc10___bit 10
-#define reg_pinmux_rw_pc_iop___pc11___lsb 11
-#define reg_pinmux_rw_pc_iop___pc11___width 1
-#define reg_pinmux_rw_pc_iop___pc11___bit 11
-#define reg_pinmux_rw_pc_iop___pc12___lsb 12
-#define reg_pinmux_rw_pc_iop___pc12___width 1
-#define reg_pinmux_rw_pc_iop___pc12___bit 12
-#define reg_pinmux_rw_pc_iop___pc13___lsb 13
-#define reg_pinmux_rw_pc_iop___pc13___width 1
-#define reg_pinmux_rw_pc_iop___pc13___bit 13
-#define reg_pinmux_rw_pc_iop___pc14___lsb 14
-#define reg_pinmux_rw_pc_iop___pc14___width 1
-#define reg_pinmux_rw_pc_iop___pc14___bit 14
-#define reg_pinmux_rw_pc_iop___pc15___lsb 15
-#define reg_pinmux_rw_pc_iop___pc15___width 1
-#define reg_pinmux_rw_pc_iop___pc15___bit 15
-#define reg_pinmux_rw_pc_iop___pc16___lsb 16
-#define reg_pinmux_rw_pc_iop___pc16___width 1
-#define reg_pinmux_rw_pc_iop___pc16___bit 16
-#define reg_pinmux_rw_pc_iop___pc17___lsb 17
-#define reg_pinmux_rw_pc_iop___pc17___width 1
-#define reg_pinmux_rw_pc_iop___pc17___bit 17
-#define reg_pinmux_rw_pc_iop_offset 20
-
-/* Register rw_pd_gio, scope pinmux, type rw */
-#define reg_pinmux_rw_pd_gio___pd0___lsb 0
-#define reg_pinmux_rw_pd_gio___pd0___width 1
-#define reg_pinmux_rw_pd_gio___pd0___bit 0
-#define reg_pinmux_rw_pd_gio___pd1___lsb 1
-#define reg_pinmux_rw_pd_gio___pd1___width 1
-#define reg_pinmux_rw_pd_gio___pd1___bit 1
-#define reg_pinmux_rw_pd_gio___pd2___lsb 2
-#define reg_pinmux_rw_pd_gio___pd2___width 1
-#define reg_pinmux_rw_pd_gio___pd2___bit 2
-#define reg_pinmux_rw_pd_gio___pd3___lsb 3
-#define reg_pinmux_rw_pd_gio___pd3___width 1
-#define reg_pinmux_rw_pd_gio___pd3___bit 3
-#define reg_pinmux_rw_pd_gio___pd4___lsb 4
-#define reg_pinmux_rw_pd_gio___pd4___width 1
-#define reg_pinmux_rw_pd_gio___pd4___bit 4
-#define reg_pinmux_rw_pd_gio___pd5___lsb 5
-#define reg_pinmux_rw_pd_gio___pd5___width 1
-#define reg_pinmux_rw_pd_gio___pd5___bit 5
-#define reg_pinmux_rw_pd_gio___pd6___lsb 6
-#define reg_pinmux_rw_pd_gio___pd6___width 1
-#define reg_pinmux_rw_pd_gio___pd6___bit 6
-#define reg_pinmux_rw_pd_gio___pd7___lsb 7
-#define reg_pinmux_rw_pd_gio___pd7___width 1
-#define reg_pinmux_rw_pd_gio___pd7___bit 7
-#define reg_pinmux_rw_pd_gio___pd8___lsb 8
-#define reg_pinmux_rw_pd_gio___pd8___width 1
-#define reg_pinmux_rw_pd_gio___pd8___bit 8
-#define reg_pinmux_rw_pd_gio___pd9___lsb 9
-#define reg_pinmux_rw_pd_gio___pd9___width 1
-#define reg_pinmux_rw_pd_gio___pd9___bit 9
-#define reg_pinmux_rw_pd_gio___pd10___lsb 10
-#define reg_pinmux_rw_pd_gio___pd10___width 1
-#define reg_pinmux_rw_pd_gio___pd10___bit 10
-#define reg_pinmux_rw_pd_gio___pd11___lsb 11
-#define reg_pinmux_rw_pd_gio___pd11___width 1
-#define reg_pinmux_rw_pd_gio___pd11___bit 11
-#define reg_pinmux_rw_pd_gio___pd12___lsb 12
-#define reg_pinmux_rw_pd_gio___pd12___width 1
-#define reg_pinmux_rw_pd_gio___pd12___bit 12
-#define reg_pinmux_rw_pd_gio___pd13___lsb 13
-#define reg_pinmux_rw_pd_gio___pd13___width 1
-#define reg_pinmux_rw_pd_gio___pd13___bit 13
-#define reg_pinmux_rw_pd_gio___pd14___lsb 14
-#define reg_pinmux_rw_pd_gio___pd14___width 1
-#define reg_pinmux_rw_pd_gio___pd14___bit 14
-#define reg_pinmux_rw_pd_gio___pd15___lsb 15
-#define reg_pinmux_rw_pd_gio___pd15___width 1
-#define reg_pinmux_rw_pd_gio___pd15___bit 15
-#define reg_pinmux_rw_pd_gio___pd16___lsb 16
-#define reg_pinmux_rw_pd_gio___pd16___width 1
-#define reg_pinmux_rw_pd_gio___pd16___bit 16
-#define reg_pinmux_rw_pd_gio___pd17___lsb 17
-#define reg_pinmux_rw_pd_gio___pd17___width 1
-#define reg_pinmux_rw_pd_gio___pd17___bit 17
-#define reg_pinmux_rw_pd_gio_offset 24
-
-/* Register rw_pd_iop, scope pinmux, type rw */
-#define reg_pinmux_rw_pd_iop___pd0___lsb 0
-#define reg_pinmux_rw_pd_iop___pd0___width 1
-#define reg_pinmux_rw_pd_iop___pd0___bit 0
-#define reg_pinmux_rw_pd_iop___pd1___lsb 1
-#define reg_pinmux_rw_pd_iop___pd1___width 1
-#define reg_pinmux_rw_pd_iop___pd1___bit 1
-#define reg_pinmux_rw_pd_iop___pd2___lsb 2
-#define reg_pinmux_rw_pd_iop___pd2___width 1
-#define reg_pinmux_rw_pd_iop___pd2___bit 2
-#define reg_pinmux_rw_pd_iop___pd3___lsb 3
-#define reg_pinmux_rw_pd_iop___pd3___width 1
-#define reg_pinmux_rw_pd_iop___pd3___bit 3
-#define reg_pinmux_rw_pd_iop___pd4___lsb 4
-#define reg_pinmux_rw_pd_iop___pd4___width 1
-#define reg_pinmux_rw_pd_iop___pd4___bit 4
-#define reg_pinmux_rw_pd_iop___pd5___lsb 5
-#define reg_pinmux_rw_pd_iop___pd5___width 1
-#define reg_pinmux_rw_pd_iop___pd5___bit 5
-#define reg_pinmux_rw_pd_iop___pd6___lsb 6
-#define reg_pinmux_rw_pd_iop___pd6___width 1
-#define reg_pinmux_rw_pd_iop___pd6___bit 6
-#define reg_pinmux_rw_pd_iop___pd7___lsb 7
-#define reg_pinmux_rw_pd_iop___pd7___width 1
-#define reg_pinmux_rw_pd_iop___pd7___bit 7
-#define reg_pinmux_rw_pd_iop___pd8___lsb 8
-#define reg_pinmux_rw_pd_iop___pd8___width 1
-#define reg_pinmux_rw_pd_iop___pd8___bit 8
-#define reg_pinmux_rw_pd_iop___pd9___lsb 9
-#define reg_pinmux_rw_pd_iop___pd9___width 1
-#define reg_pinmux_rw_pd_iop___pd9___bit 9
-#define reg_pinmux_rw_pd_iop___pd10___lsb 10
-#define reg_pinmux_rw_pd_iop___pd10___width 1
-#define reg_pinmux_rw_pd_iop___pd10___bit 10
-#define reg_pinmux_rw_pd_iop___pd11___lsb 11
-#define reg_pinmux_rw_pd_iop___pd11___width 1
-#define reg_pinmux_rw_pd_iop___pd11___bit 11
-#define reg_pinmux_rw_pd_iop___pd12___lsb 12
-#define reg_pinmux_rw_pd_iop___pd12___width 1
-#define reg_pinmux_rw_pd_iop___pd12___bit 12
-#define reg_pinmux_rw_pd_iop___pd13___lsb 13
-#define reg_pinmux_rw_pd_iop___pd13___width 1
-#define reg_pinmux_rw_pd_iop___pd13___bit 13
-#define reg_pinmux_rw_pd_iop___pd14___lsb 14
-#define reg_pinmux_rw_pd_iop___pd14___width 1
-#define reg_pinmux_rw_pd_iop___pd14___bit 14
-#define reg_pinmux_rw_pd_iop___pd15___lsb 15
-#define reg_pinmux_rw_pd_iop___pd15___width 1
-#define reg_pinmux_rw_pd_iop___pd15___bit 15
-#define reg_pinmux_rw_pd_iop___pd16___lsb 16
-#define reg_pinmux_rw_pd_iop___pd16___width 1
-#define reg_pinmux_rw_pd_iop___pd16___bit 16
-#define reg_pinmux_rw_pd_iop___pd17___lsb 17
-#define reg_pinmux_rw_pd_iop___pd17___width 1
-#define reg_pinmux_rw_pd_iop___pd17___bit 17
-#define reg_pinmux_rw_pd_iop_offset 28
-
-/* Register rw_pe_gio, scope pinmux, type rw */
-#define reg_pinmux_rw_pe_gio___pe0___lsb 0
-#define reg_pinmux_rw_pe_gio___pe0___width 1
-#define reg_pinmux_rw_pe_gio___pe0___bit 0
-#define reg_pinmux_rw_pe_gio___pe1___lsb 1
-#define reg_pinmux_rw_pe_gio___pe1___width 1
-#define reg_pinmux_rw_pe_gio___pe1___bit 1
-#define reg_pinmux_rw_pe_gio___pe2___lsb 2
-#define reg_pinmux_rw_pe_gio___pe2___width 1
-#define reg_pinmux_rw_pe_gio___pe2___bit 2
-#define reg_pinmux_rw_pe_gio___pe3___lsb 3
-#define reg_pinmux_rw_pe_gio___pe3___width 1
-#define reg_pinmux_rw_pe_gio___pe3___bit 3
-#define reg_pinmux_rw_pe_gio___pe4___lsb 4
-#define reg_pinmux_rw_pe_gio___pe4___width 1
-#define reg_pinmux_rw_pe_gio___pe4___bit 4
-#define reg_pinmux_rw_pe_gio___pe5___lsb 5
-#define reg_pinmux_rw_pe_gio___pe5___width 1
-#define reg_pinmux_rw_pe_gio___pe5___bit 5
-#define reg_pinmux_rw_pe_gio___pe6___lsb 6
-#define reg_pinmux_rw_pe_gio___pe6___width 1
-#define reg_pinmux_rw_pe_gio___pe6___bit 6
-#define reg_pinmux_rw_pe_gio___pe7___lsb 7
-#define reg_pinmux_rw_pe_gio___pe7___width 1
-#define reg_pinmux_rw_pe_gio___pe7___bit 7
-#define reg_pinmux_rw_pe_gio___pe8___lsb 8
-#define reg_pinmux_rw_pe_gio___pe8___width 1
-#define reg_pinmux_rw_pe_gio___pe8___bit 8
-#define reg_pinmux_rw_pe_gio___pe9___lsb 9
-#define reg_pinmux_rw_pe_gio___pe9___width 1
-#define reg_pinmux_rw_pe_gio___pe9___bit 9
-#define reg_pinmux_rw_pe_gio___pe10___lsb 10
-#define reg_pinmux_rw_pe_gio___pe10___width 1
-#define reg_pinmux_rw_pe_gio___pe10___bit 10
-#define reg_pinmux_rw_pe_gio___pe11___lsb 11
-#define reg_pinmux_rw_pe_gio___pe11___width 1
-#define reg_pinmux_rw_pe_gio___pe11___bit 11
-#define reg_pinmux_rw_pe_gio___pe12___lsb 12
-#define reg_pinmux_rw_pe_gio___pe12___width 1
-#define reg_pinmux_rw_pe_gio___pe12___bit 12
-#define reg_pinmux_rw_pe_gio___pe13___lsb 13
-#define reg_pinmux_rw_pe_gio___pe13___width 1
-#define reg_pinmux_rw_pe_gio___pe13___bit 13
-#define reg_pinmux_rw_pe_gio___pe14___lsb 14
-#define reg_pinmux_rw_pe_gio___pe14___width 1
-#define reg_pinmux_rw_pe_gio___pe14___bit 14
-#define reg_pinmux_rw_pe_gio___pe15___lsb 15
-#define reg_pinmux_rw_pe_gio___pe15___width 1
-#define reg_pinmux_rw_pe_gio___pe15___bit 15
-#define reg_pinmux_rw_pe_gio___pe16___lsb 16
-#define reg_pinmux_rw_pe_gio___pe16___width 1
-#define reg_pinmux_rw_pe_gio___pe16___bit 16
-#define reg_pinmux_rw_pe_gio___pe17___lsb 17
-#define reg_pinmux_rw_pe_gio___pe17___width 1
-#define reg_pinmux_rw_pe_gio___pe17___bit 17
-#define reg_pinmux_rw_pe_gio_offset 32
-
-/* Register rw_pe_iop, scope pinmux, type rw */
-#define reg_pinmux_rw_pe_iop___pe0___lsb 0
-#define reg_pinmux_rw_pe_iop___pe0___width 1
-#define reg_pinmux_rw_pe_iop___pe0___bit 0
-#define reg_pinmux_rw_pe_iop___pe1___lsb 1
-#define reg_pinmux_rw_pe_iop___pe1___width 1
-#define reg_pinmux_rw_pe_iop___pe1___bit 1
-#define reg_pinmux_rw_pe_iop___pe2___lsb 2
-#define reg_pinmux_rw_pe_iop___pe2___width 1
-#define reg_pinmux_rw_pe_iop___pe2___bit 2
-#define reg_pinmux_rw_pe_iop___pe3___lsb 3
-#define reg_pinmux_rw_pe_iop___pe3___width 1
-#define reg_pinmux_rw_pe_iop___pe3___bit 3
-#define reg_pinmux_rw_pe_iop___pe4___lsb 4
-#define reg_pinmux_rw_pe_iop___pe4___width 1
-#define reg_pinmux_rw_pe_iop___pe4___bit 4
-#define reg_pinmux_rw_pe_iop___pe5___lsb 5
-#define reg_pinmux_rw_pe_iop___pe5___width 1
-#define reg_pinmux_rw_pe_iop___pe5___bit 5
-#define reg_pinmux_rw_pe_iop___pe6___lsb 6
-#define reg_pinmux_rw_pe_iop___pe6___width 1
-#define reg_pinmux_rw_pe_iop___pe6___bit 6
-#define reg_pinmux_rw_pe_iop___pe7___lsb 7
-#define reg_pinmux_rw_pe_iop___pe7___width 1
-#define reg_pinmux_rw_pe_iop___pe7___bit 7
-#define reg_pinmux_rw_pe_iop___pe8___lsb 8
-#define reg_pinmux_rw_pe_iop___pe8___width 1
-#define reg_pinmux_rw_pe_iop___pe8___bit 8
-#define reg_pinmux_rw_pe_iop___pe9___lsb 9
-#define reg_pinmux_rw_pe_iop___pe9___width 1
-#define reg_pinmux_rw_pe_iop___pe9___bit 9
-#define reg_pinmux_rw_pe_iop___pe10___lsb 10
-#define reg_pinmux_rw_pe_iop___pe10___width 1
-#define reg_pinmux_rw_pe_iop___pe10___bit 10
-#define reg_pinmux_rw_pe_iop___pe11___lsb 11
-#define reg_pinmux_rw_pe_iop___pe11___width 1
-#define reg_pinmux_rw_pe_iop___pe11___bit 11
-#define reg_pinmux_rw_pe_iop___pe12___lsb 12
-#define reg_pinmux_rw_pe_iop___pe12___width 1
-#define reg_pinmux_rw_pe_iop___pe12___bit 12
-#define reg_pinmux_rw_pe_iop___pe13___lsb 13
-#define reg_pinmux_rw_pe_iop___pe13___width 1
-#define reg_pinmux_rw_pe_iop___pe13___bit 13
-#define reg_pinmux_rw_pe_iop___pe14___lsb 14
-#define reg_pinmux_rw_pe_iop___pe14___width 1
-#define reg_pinmux_rw_pe_iop___pe14___bit 14
-#define reg_pinmux_rw_pe_iop___pe15___lsb 15
-#define reg_pinmux_rw_pe_iop___pe15___width 1
-#define reg_pinmux_rw_pe_iop___pe15___bit 15
-#define reg_pinmux_rw_pe_iop___pe16___lsb 16
-#define reg_pinmux_rw_pe_iop___pe16___width 1
-#define reg_pinmux_rw_pe_iop___pe16___bit 16
-#define reg_pinmux_rw_pe_iop___pe17___lsb 17
-#define reg_pinmux_rw_pe_iop___pe17___width 1
-#define reg_pinmux_rw_pe_iop___pe17___bit 17
-#define reg_pinmux_rw_pe_iop_offset 36
-
-/* Register rw_usb_phy, scope pinmux, type rw */
-#define reg_pinmux_rw_usb_phy___en_usb0___lsb 0
-#define reg_pinmux_rw_usb_phy___en_usb0___width 1
-#define reg_pinmux_rw_usb_phy___en_usb0___bit 0
-#define reg_pinmux_rw_usb_phy___en_usb1___lsb 1
-#define reg_pinmux_rw_usb_phy___en_usb1___width 1
-#define reg_pinmux_rw_usb_phy___en_usb1___bit 1
-#define reg_pinmux_rw_usb_phy_offset 40
-
-
-/* Constants */
-#define regk_pinmux_no 0x00000000
-#define regk_pinmux_rw_hwprot_default 0x00000000
-#define regk_pinmux_rw_pa_default 0x00000000
-#define regk_pinmux_rw_pb_gio_default 0x00000000
-#define regk_pinmux_rw_pb_iop_default 0x00000000
-#define regk_pinmux_rw_pc_gio_default 0x00000000
-#define regk_pinmux_rw_pc_iop_default 0x00000000
-#define regk_pinmux_rw_pd_gio_default 0x00000000
-#define regk_pinmux_rw_pd_iop_default 0x00000000
-#define regk_pinmux_rw_pe_gio_default 0x00000000
-#define regk_pinmux_rw_pe_iop_default 0x00000000
-#define regk_pinmux_rw_usb_phy_default 0x00000000
-#define regk_pinmux_yes 0x00000001
-#endif /* __pinmux_defs_asm_h */
+++ /dev/null
-#ifndef __reg_map_h
-#define __reg_map_h
-
-/*
- * This file is autogenerated from
- * file: ../../mod/fakereg.rmap
- * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp
- * last modified: Wed Feb 11 20:53:25 2004
- * file: ../../rtl/global.rmap
- * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp
- * last modified: Mon Aug 18 17:08:23 2003
- * file: ../../mod/modreg.rmap
- * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp
- * last modified: Fri Feb 20 16:40:04 2004
- *
- * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap
- * id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
- * Any changes here will be lost.
- *
- * -*- buffer-read-only: t -*-
- */
-#define regi_artpec_mod 0xb7044000
-#define regi_ata 0xb0032000
-#define regi_ata_mod 0xb7006000
-#define regi_barber 0xb701a000
-#define regi_bif_core 0xb0014000
-#define regi_bif_dma 0xb0016000
-#define regi_bif_slave 0xb0018000
-#define regi_bif_slave_ext 0xac000000
-#define regi_bus_master 0xb703c000
-#define regi_config 0xb003c000
-#define regi_dma0 0xb0000000
-#define regi_dma1 0xb0002000
-#define regi_dma2 0xb0004000
-#define regi_dma3 0xb0006000
-#define regi_dma4 0xb0008000
-#define regi_dma5 0xb000a000
-#define regi_dma6 0xb000c000
-#define regi_dma7 0xb000e000
-#define regi_dma8 0xb0010000
-#define regi_dma9 0xb0012000
-#define regi_eth0 0xb0034000
-#define regi_eth1 0xb0036000
-#define regi_eth_mod 0xb7004000
-#define regi_eth_mod1 0xb701c000
-#define regi_eth_strmod 0xb7008000
-#define regi_eth_strmod1 0xb7032000
-#define regi_ext_dma 0xb703a000
-#define regi_ext_mem 0xb7046000
-#define regi_gen_io 0xb7016000
-#define regi_gio 0xb001a000
-#define regi_hook 0xb7000000
-#define regi_iop 0xb0020000
-#define regi_irq 0xb001c000
-#define regi_irq_nmi 0xb701e000
-#define regi_marb 0xb003e000
-#define regi_marb_bp0 0xb003e240
-#define regi_marb_bp1 0xb003e280
-#define regi_marb_bp2 0xb003e2c0
-#define regi_marb_bp3 0xb003e300
-#define regi_nand_mod 0xb7014000
-#define regi_p21 0xb002e000
-#define regi_p21_mod 0xb7042000
-#define regi_pci_mod 0xb7010000
-#define regi_pin_test 0xb7018000
-#define regi_pinmux 0xb0038000
-#define regi_sdram_chk 0xb703e000
-#define regi_sdram_mod 0xb7012000
-#define regi_ser0 0xb0026000
-#define regi_ser1 0xb0028000
-#define regi_ser2 0xb002a000
-#define regi_ser3 0xb002c000
-#define regi_ser_mod0 0xb7020000
-#define regi_ser_mod1 0xb7022000
-#define regi_ser_mod2 0xb7024000
-#define regi_ser_mod3 0xb7026000
-#define regi_smif_stat 0xb700e000
-#define regi_sser0 0xb0022000
-#define regi_sser1 0xb0024000
-#define regi_sser_mod0 0xb700a000
-#define regi_sser_mod1 0xb700c000
-#define regi_strcop 0xb0030000
-#define regi_strmux 0xb003a000
-#define regi_strmux_tst 0xb7040000
-#define regi_tap 0xb7002000
-#define regi_timer 0xb001e000
-#define regi_timer_mod 0xb7034000
-#define regi_trace 0xb0040000
-#define regi_usb0 0xb7028000
-#define regi_usb1 0xb702a000
-#define regi_usb2 0xb702c000
-#define regi_usb3 0xb702e000
-#define regi_usb_dev 0xb7030000
-#define regi_utmi_mod0 0xb7036000
-#define regi_utmi_mod1 0xb7038000
-#endif /* __reg_map_h */
+++ /dev/null
-#ifndef __gio_defs_h
-#define __gio_defs_h
-
-/*
- * This file is autogenerated from
- * file: ../../inst/gio/rtl/gio_regs.r
- * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp
- * last modfied: Mon Apr 11 16:07:47 2005
- *
- * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r
- * id: $Id: gio_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $
- * Any changes here will be lost.
- *
- * -*- buffer-read-only: t -*-
- */
-/* Main access macros */
-#ifndef REG_RD
-#define REG_RD( scope, inst, reg ) \
- REG_READ( reg_##scope##_##reg, \
- (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_WR
-#define REG_WR( scope, inst, reg, val ) \
- REG_WRITE( reg_##scope##_##reg, \
- (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_VECT
-#define REG_RD_VECT( scope, inst, reg, index ) \
- REG_READ( reg_##scope##_##reg, \
- (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_VECT
-#define REG_WR_VECT( scope, inst, reg, index, val ) \
- REG_WRITE( reg_##scope##_##reg, \
- (inst) + REG_WR_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_INT
-#define REG_RD_INT( scope, inst, reg ) \
- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_INT
-#define REG_WR_INT( scope, inst, reg, val ) \
- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_INT_VECT
-#define REG_RD_INT_VECT( scope, inst, reg, index ) \
- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_INT_VECT
-#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \
- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_TYPE_CONV
-#define REG_TYPE_CONV( type, orgtype, val ) \
- ( { union { orgtype o; type n; } r; r.o = val; r.n; } )
-#endif
-
-#ifndef reg_page_size
-#define reg_page_size 8192
-#endif
-
-#ifndef REG_ADDR
-#define REG_ADDR( scope, inst, reg ) \
- ( (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_ADDR_VECT
-#define REG_ADDR_VECT( scope, inst, reg, index ) \
- ( (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-/* C-code for register scope gio */
-
-/* Register rw_pa_dout, scope gio, type rw */
-typedef struct {
- unsigned int data : 8;
- unsigned int dummy1 : 24;
-} reg_gio_rw_pa_dout;
-#define REG_RD_ADDR_gio_rw_pa_dout 0
-#define REG_WR_ADDR_gio_rw_pa_dout 0
-
-/* Register r_pa_din, scope gio, type r */
-typedef struct {
- unsigned int data : 8;
- unsigned int dummy1 : 24;
-} reg_gio_r_pa_din;
-#define REG_RD_ADDR_gio_r_pa_din 4
-
-/* Register rw_pa_oe, scope gio, type rw */
-typedef struct {
- unsigned int oe : 8;
- unsigned int dummy1 : 24;
-} reg_gio_rw_pa_oe;
-#define REG_RD_ADDR_gio_rw_pa_oe 8
-#define REG_WR_ADDR_gio_rw_pa_oe 8
-
-/* Register rw_intr_cfg, scope gio, type rw */
-typedef struct {
- unsigned int pa0 : 3;
- unsigned int pa1 : 3;
- unsigned int pa2 : 3;
- unsigned int pa3 : 3;
- unsigned int pa4 : 3;
- unsigned int pa5 : 3;
- unsigned int pa6 : 3;
- unsigned int pa7 : 3;
- unsigned int dummy1 : 8;
-} reg_gio_rw_intr_cfg;
-#define REG_RD_ADDR_gio_rw_intr_cfg 12
-#define REG_WR_ADDR_gio_rw_intr_cfg 12
-
-/* Register rw_intr_mask, scope gio, type rw */
-typedef struct {
- unsigned int pa0 : 1;
- unsigned int pa1 : 1;
- unsigned int pa2 : 1;
- unsigned int pa3 : 1;
- unsigned int pa4 : 1;
- unsigned int pa5 : 1;
- unsigned int pa6 : 1;
- unsigned int pa7 : 1;
- unsigned int dummy1 : 24;
-} reg_gio_rw_intr_mask;
-#define REG_RD_ADDR_gio_rw_intr_mask 16
-#define REG_WR_ADDR_gio_rw_intr_mask 16
-
-/* Register rw_ack_intr, scope gio, type rw */
-typedef struct {
- unsigned int pa0 : 1;
- unsigned int pa1 : 1;
- unsigned int pa2 : 1;
- unsigned int pa3 : 1;
- unsigned int pa4 : 1;
- unsigned int pa5 : 1;
- unsigned int pa6 : 1;
- unsigned int pa7 : 1;
- unsigned int dummy1 : 24;
-} reg_gio_rw_ack_intr;
-#define REG_RD_ADDR_gio_rw_ack_intr 20
-#define REG_WR_ADDR_gio_rw_ack_intr 20
-
-/* Register r_intr, scope gio, type r */
-typedef struct {
- unsigned int pa0 : 1;
- unsigned int pa1 : 1;
- unsigned int pa2 : 1;
- unsigned int pa3 : 1;
- unsigned int pa4 : 1;
- unsigned int pa5 : 1;
- unsigned int pa6 : 1;
- unsigned int pa7 : 1;
- unsigned int dummy1 : 24;
-} reg_gio_r_intr;
-#define REG_RD_ADDR_gio_r_intr 24
-
-/* Register r_masked_intr, scope gio, type r */
-typedef struct {
- unsigned int pa0 : 1;
- unsigned int pa1 : 1;
- unsigned int pa2 : 1;
- unsigned int pa3 : 1;
- unsigned int pa4 : 1;
- unsigned int pa5 : 1;
- unsigned int pa6 : 1;
- unsigned int pa7 : 1;
- unsigned int dummy1 : 24;
-} reg_gio_r_masked_intr;
-#define REG_RD_ADDR_gio_r_masked_intr 28
-
-/* Register rw_pb_dout, scope gio, type rw */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pb_dout;
-#define REG_RD_ADDR_gio_rw_pb_dout 32
-#define REG_WR_ADDR_gio_rw_pb_dout 32
-
-/* Register r_pb_din, scope gio, type r */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_r_pb_din;
-#define REG_RD_ADDR_gio_r_pb_din 36
-
-/* Register rw_pb_oe, scope gio, type rw */
-typedef struct {
- unsigned int oe : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pb_oe;
-#define REG_RD_ADDR_gio_rw_pb_oe 40
-#define REG_WR_ADDR_gio_rw_pb_oe 40
-
-/* Register rw_pc_dout, scope gio, type rw */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pc_dout;
-#define REG_RD_ADDR_gio_rw_pc_dout 48
-#define REG_WR_ADDR_gio_rw_pc_dout 48
-
-/* Register r_pc_din, scope gio, type r */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_r_pc_din;
-#define REG_RD_ADDR_gio_r_pc_din 52
-
-/* Register rw_pc_oe, scope gio, type rw */
-typedef struct {
- unsigned int oe : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pc_oe;
-#define REG_RD_ADDR_gio_rw_pc_oe 56
-#define REG_WR_ADDR_gio_rw_pc_oe 56
-
-/* Register rw_pd_dout, scope gio, type rw */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pd_dout;
-#define REG_RD_ADDR_gio_rw_pd_dout 64
-#define REG_WR_ADDR_gio_rw_pd_dout 64
-
-/* Register r_pd_din, scope gio, type r */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_r_pd_din;
-#define REG_RD_ADDR_gio_r_pd_din 68
-
-/* Register rw_pd_oe, scope gio, type rw */
-typedef struct {
- unsigned int oe : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pd_oe;
-#define REG_RD_ADDR_gio_rw_pd_oe 72
-#define REG_WR_ADDR_gio_rw_pd_oe 72
-
-/* Register rw_pe_dout, scope gio, type rw */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pe_dout;
-#define REG_RD_ADDR_gio_rw_pe_dout 80
-#define REG_WR_ADDR_gio_rw_pe_dout 80
-
-/* Register r_pe_din, scope gio, type r */
-typedef struct {
- unsigned int data : 18;
- unsigned int dummy1 : 14;
-} reg_gio_r_pe_din;
-#define REG_RD_ADDR_gio_r_pe_din 84
-
-/* Register rw_pe_oe, scope gio, type rw */
-typedef struct {
- unsigned int oe : 18;
- unsigned int dummy1 : 14;
-} reg_gio_rw_pe_oe;
-#define REG_RD_ADDR_gio_rw_pe_oe 88
-#define REG_WR_ADDR_gio_rw_pe_oe 88
-
-
-/* Constants */
-enum {
- regk_gio_anyedge = 0x00000007,
- regk_gio_hi = 0x00000001,
- regk_gio_lo = 0x00000002,
- regk_gio_negedge = 0x00000006,
- regk_gio_no = 0x00000000,
- regk_gio_off = 0x00000000,
- regk_gio_posedge = 0x00000005,
- regk_gio_rw_intr_cfg_default = 0x00000000,
- regk_gio_rw_intr_mask_default = 0x00000000,
- regk_gio_rw_pa_oe_default = 0x00000000,
- regk_gio_rw_pb_oe_default = 0x00000000,
- regk_gio_rw_pc_oe_default = 0x00000000,
- regk_gio_rw_pd_oe_default = 0x00000000,
- regk_gio_rw_pe_oe_default = 0x00000000,
- regk_gio_set = 0x00000003,
- regk_gio_yes = 0x00000001
-};
-#endif /* __gio_defs_h */
+++ /dev/null
-/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version
- from ../../inst/intr_vect/rtl/guinness/ivmask.config.r
-version . */
-
-#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R
-#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R
-#define MEMARB_INTR_VECT 0x31
-#define GEN_IO_INTR_VECT 0x32
-#define IOP0_INTR_VECT 0x33
-#define IOP1_INTR_VECT 0x34
-#define IOP2_INTR_VECT 0x35
-#define IOP3_INTR_VECT 0x36
-#define DMA0_INTR_VECT 0x37
-#define DMA1_INTR_VECT 0x38
-#define DMA2_INTR_VECT 0x39
-#define DMA3_INTR_VECT 0x3a
-#define DMA4_INTR_VECT 0x3b
-#define DMA5_INTR_VECT 0x3c
-#define DMA6_INTR_VECT 0x3d
-#define DMA7_INTR_VECT 0x3e
-#define DMA8_INTR_VECT 0x3f
-#define DMA9_INTR_VECT 0x40
-#define ATA_INTR_VECT 0x41
-#define SSER0_INTR_VECT 0x42
-#define SSER1_INTR_VECT 0x43
-#define SER0_INTR_VECT 0x44
-#define SER1_INTR_VECT 0x45
-#define SER2_INTR_VECT 0x46
-#define SER3_INTR_VECT 0x47
-#define P21_INTR_VECT 0x48
-#define ETH0_INTR_VECT 0x49
-#define ETH1_INTR_VECT 0x4a
-#define TIMER_INTR_VECT 0x4b
-#define BIF_ARB_INTR_VECT 0x4c
-#define BIF_DMA_INTR_VECT 0x4d
-#define EXT_INTR_VECT 0x4e
-#define IPI_INTR_VECT 0x4f
-
-#endif
+++ /dev/null
-#ifndef __pinmux_defs_h
-#define __pinmux_defs_h
-
-/*
- * This file is autogenerated from
- * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r
- * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp
- * last modfied: Mon Apr 11 16:09:11 2005
- *
- * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r
- * id: $Id: pinmux_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $
- * Any changes here will be lost.
- *
- * -*- buffer-read-only: t -*-
- */
-/* Main access macros */
-#ifndef REG_RD
-#define REG_RD( scope, inst, reg ) \
- REG_READ( reg_##scope##_##reg, \
- (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_WR
-#define REG_WR( scope, inst, reg, val ) \
- REG_WRITE( reg_##scope##_##reg, \
- (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_VECT
-#define REG_RD_VECT( scope, inst, reg, index ) \
- REG_READ( reg_##scope##_##reg, \
- (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_VECT
-#define REG_WR_VECT( scope, inst, reg, index, val ) \
- REG_WRITE( reg_##scope##_##reg, \
- (inst) + REG_WR_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_INT
-#define REG_RD_INT( scope, inst, reg ) \
- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_INT
-#define REG_WR_INT( scope, inst, reg, val ) \
- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_INT_VECT
-#define REG_RD_INT_VECT( scope, inst, reg, index ) \
- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_INT_VECT
-#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \
- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_TYPE_CONV
-#define REG_TYPE_CONV( type, orgtype, val ) \
- ( { union { orgtype o; type n; } r; r.o = val; r.n; } )
-#endif
-
-#ifndef reg_page_size
-#define reg_page_size 8192
-#endif
-
-#ifndef REG_ADDR
-#define REG_ADDR( scope, inst, reg ) \
- ( (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_ADDR_VECT
-#define REG_ADDR_VECT( scope, inst, reg, index ) \
- ( (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-/* C-code for register scope pinmux */
-
-/* Register rw_pa, scope pinmux, type rw */
-typedef struct {
- unsigned int pa0 : 1;
- unsigned int pa1 : 1;
- unsigned int pa2 : 1;
- unsigned int pa3 : 1;
- unsigned int pa4 : 1;
- unsigned int pa5 : 1;
- unsigned int pa6 : 1;
- unsigned int pa7 : 1;
- unsigned int csp2_n : 1;
- unsigned int csp3_n : 1;
- unsigned int csp5_n : 1;
- unsigned int csp6_n : 1;
- unsigned int hsh4 : 1;
- unsigned int hsh5 : 1;
- unsigned int hsh6 : 1;
- unsigned int hsh7 : 1;
- unsigned int dummy1 : 16;
-} reg_pinmux_rw_pa;
-#define REG_RD_ADDR_pinmux_rw_pa 0
-#define REG_WR_ADDR_pinmux_rw_pa 0
-
-/* Register rw_hwprot, scope pinmux, type rw */
-typedef struct {
- unsigned int ser1 : 1;
- unsigned int ser2 : 1;
- unsigned int ser3 : 1;
- unsigned int sser0 : 1;
- unsigned int sser1 : 1;
- unsigned int ata0 : 1;
- unsigned int ata1 : 1;
- unsigned int ata2 : 1;
- unsigned int ata3 : 1;
- unsigned int ata : 1;
- unsigned int eth1 : 1;
- unsigned int eth1_mgm : 1;
- unsigned int timer : 1;
- unsigned int p21 : 1;
- unsigned int dummy1 : 18;
-} reg_pinmux_rw_hwprot;
-#define REG_RD_ADDR_pinmux_rw_hwprot 4
-#define REG_WR_ADDR_pinmux_rw_hwprot 4
-
-/* Register rw_pb_gio, scope pinmux, type rw */
-typedef struct {
- unsigned int pb0 : 1;
- unsigned int pb1 : 1;
- unsigned int pb2 : 1;
- unsigned int pb3 : 1;
- unsigned int pb4 : 1;
- unsigned int pb5 : 1;
- unsigned int pb6 : 1;
- unsigned int pb7 : 1;
- unsigned int pb8 : 1;
- unsigned int pb9 : 1;
- unsigned int pb10 : 1;
- unsigned int pb11 : 1;
- unsigned int pb12 : 1;
- unsigned int pb13 : 1;
- unsigned int pb14 : 1;
- unsigned int pb15 : 1;
- unsigned int pb16 : 1;
- unsigned int pb17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pb_gio;
-#define REG_RD_ADDR_pinmux_rw_pb_gio 8
-#define REG_WR_ADDR_pinmux_rw_pb_gio 8
-
-/* Register rw_pb_iop, scope pinmux, type rw */
-typedef struct {
- unsigned int pb0 : 1;
- unsigned int pb1 : 1;
- unsigned int pb2 : 1;
- unsigned int pb3 : 1;
- unsigned int pb4 : 1;
- unsigned int pb5 : 1;
- unsigned int pb6 : 1;
- unsigned int pb7 : 1;
- unsigned int pb8 : 1;
- unsigned int pb9 : 1;
- unsigned int pb10 : 1;
- unsigned int pb11 : 1;
- unsigned int pb12 : 1;
- unsigned int pb13 : 1;
- unsigned int pb14 : 1;
- unsigned int pb15 : 1;
- unsigned int pb16 : 1;
- unsigned int pb17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pb_iop;
-#define REG_RD_ADDR_pinmux_rw_pb_iop 12
-#define REG_WR_ADDR_pinmux_rw_pb_iop 12
-
-/* Register rw_pc_gio, scope pinmux, type rw */
-typedef struct {
- unsigned int pc0 : 1;
- unsigned int pc1 : 1;
- unsigned int pc2 : 1;
- unsigned int pc3 : 1;
- unsigned int pc4 : 1;
- unsigned int pc5 : 1;
- unsigned int pc6 : 1;
- unsigned int pc7 : 1;
- unsigned int pc8 : 1;
- unsigned int pc9 : 1;
- unsigned int pc10 : 1;
- unsigned int pc11 : 1;
- unsigned int pc12 : 1;
- unsigned int pc13 : 1;
- unsigned int pc14 : 1;
- unsigned int pc15 : 1;
- unsigned int pc16 : 1;
- unsigned int pc17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pc_gio;
-#define REG_RD_ADDR_pinmux_rw_pc_gio 16
-#define REG_WR_ADDR_pinmux_rw_pc_gio 16
-
-/* Register rw_pc_iop, scope pinmux, type rw */
-typedef struct {
- unsigned int pc0 : 1;
- unsigned int pc1 : 1;
- unsigned int pc2 : 1;
- unsigned int pc3 : 1;
- unsigned int pc4 : 1;
- unsigned int pc5 : 1;
- unsigned int pc6 : 1;
- unsigned int pc7 : 1;
- unsigned int pc8 : 1;
- unsigned int pc9 : 1;
- unsigned int pc10 : 1;
- unsigned int pc11 : 1;
- unsigned int pc12 : 1;
- unsigned int pc13 : 1;
- unsigned int pc14 : 1;
- unsigned int pc15 : 1;
- unsigned int pc16 : 1;
- unsigned int pc17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pc_iop;
-#define REG_RD_ADDR_pinmux_rw_pc_iop 20
-#define REG_WR_ADDR_pinmux_rw_pc_iop 20
-
-/* Register rw_pd_gio, scope pinmux, type rw */
-typedef struct {
- unsigned int pd0 : 1;
- unsigned int pd1 : 1;
- unsigned int pd2 : 1;
- unsigned int pd3 : 1;
- unsigned int pd4 : 1;
- unsigned int pd5 : 1;
- unsigned int pd6 : 1;
- unsigned int pd7 : 1;
- unsigned int pd8 : 1;
- unsigned int pd9 : 1;
- unsigned int pd10 : 1;
- unsigned int pd11 : 1;
- unsigned int pd12 : 1;
- unsigned int pd13 : 1;
- unsigned int pd14 : 1;
- unsigned int pd15 : 1;
- unsigned int pd16 : 1;
- unsigned int pd17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pd_gio;
-#define REG_RD_ADDR_pinmux_rw_pd_gio 24
-#define REG_WR_ADDR_pinmux_rw_pd_gio 24
-
-/* Register rw_pd_iop, scope pinmux, type rw */
-typedef struct {
- unsigned int pd0 : 1;
- unsigned int pd1 : 1;
- unsigned int pd2 : 1;
- unsigned int pd3 : 1;
- unsigned int pd4 : 1;
- unsigned int pd5 : 1;
- unsigned int pd6 : 1;
- unsigned int pd7 : 1;
- unsigned int pd8 : 1;
- unsigned int pd9 : 1;
- unsigned int pd10 : 1;
- unsigned int pd11 : 1;
- unsigned int pd12 : 1;
- unsigned int pd13 : 1;
- unsigned int pd14 : 1;
- unsigned int pd15 : 1;
- unsigned int pd16 : 1;
- unsigned int pd17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pd_iop;
-#define REG_RD_ADDR_pinmux_rw_pd_iop 28
-#define REG_WR_ADDR_pinmux_rw_pd_iop 28
-
-/* Register rw_pe_gio, scope pinmux, type rw */
-typedef struct {
- unsigned int pe0 : 1;
- unsigned int pe1 : 1;
- unsigned int pe2 : 1;
- unsigned int pe3 : 1;
- unsigned int pe4 : 1;
- unsigned int pe5 : 1;
- unsigned int pe6 : 1;
- unsigned int pe7 : 1;
- unsigned int pe8 : 1;
- unsigned int pe9 : 1;
- unsigned int pe10 : 1;
- unsigned int pe11 : 1;
- unsigned int pe12 : 1;
- unsigned int pe13 : 1;
- unsigned int pe14 : 1;
- unsigned int pe15 : 1;
- unsigned int pe16 : 1;
- unsigned int pe17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pe_gio;
-#define REG_RD_ADDR_pinmux_rw_pe_gio 32
-#define REG_WR_ADDR_pinmux_rw_pe_gio 32
-
-/* Register rw_pe_iop, scope pinmux, type rw */
-typedef struct {
- unsigned int pe0 : 1;
- unsigned int pe1 : 1;
- unsigned int pe2 : 1;
- unsigned int pe3 : 1;
- unsigned int pe4 : 1;
- unsigned int pe5 : 1;
- unsigned int pe6 : 1;
- unsigned int pe7 : 1;
- unsigned int pe8 : 1;
- unsigned int pe9 : 1;
- unsigned int pe10 : 1;
- unsigned int pe11 : 1;
- unsigned int pe12 : 1;
- unsigned int pe13 : 1;
- unsigned int pe14 : 1;
- unsigned int pe15 : 1;
- unsigned int pe16 : 1;
- unsigned int pe17 : 1;
- unsigned int dummy1 : 14;
-} reg_pinmux_rw_pe_iop;
-#define REG_RD_ADDR_pinmux_rw_pe_iop 36
-#define REG_WR_ADDR_pinmux_rw_pe_iop 36
-
-/* Register rw_usb_phy, scope pinmux, type rw */
-typedef struct {
- unsigned int en_usb0 : 1;
- unsigned int en_usb1 : 1;
- unsigned int dummy1 : 30;
-} reg_pinmux_rw_usb_phy;
-#define REG_RD_ADDR_pinmux_rw_usb_phy 40
-#define REG_WR_ADDR_pinmux_rw_usb_phy 40
-
-
-/* Constants */
-enum {
- regk_pinmux_no = 0x00000000,
- regk_pinmux_rw_hwprot_default = 0x00000000,
- regk_pinmux_rw_pa_default = 0x00000000,
- regk_pinmux_rw_pb_gio_default = 0x00000000,
- regk_pinmux_rw_pb_iop_default = 0x00000000,
- regk_pinmux_rw_pc_gio_default = 0x00000000,
- regk_pinmux_rw_pc_iop_default = 0x00000000,
- regk_pinmux_rw_pd_gio_default = 0x00000000,
- regk_pinmux_rw_pd_iop_default = 0x00000000,
- regk_pinmux_rw_pe_gio_default = 0x00000000,
- regk_pinmux_rw_pe_iop_default = 0x00000000,
- regk_pinmux_rw_usb_phy_default = 0x00000000,
- regk_pinmux_yes = 0x00000001
-};
-#endif /* __pinmux_defs_h */
+++ /dev/null
-#ifndef __strmux_defs_h
-#define __strmux_defs_h
-
-/*
- * This file is autogenerated from
- * file: ../../inst/strmux/rtl/guinness/strmux_regs.r
- * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp
- * last modfied: Mon Apr 11 16:09:43 2005
- *
- * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r
- * id: $Id: strmux_defs.h,v 1.5 2005/04/24 18:30:58 starvik Exp $
- * Any changes here will be lost.
- *
- * -*- buffer-read-only: t -*-
- */
-/* Main access macros */
-#ifndef REG_RD
-#define REG_RD( scope, inst, reg ) \
- REG_READ( reg_##scope##_##reg, \
- (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_WR
-#define REG_WR( scope, inst, reg, val ) \
- REG_WRITE( reg_##scope##_##reg, \
- (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_VECT
-#define REG_RD_VECT( scope, inst, reg, index ) \
- REG_READ( reg_##scope##_##reg, \
- (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_VECT
-#define REG_WR_VECT( scope, inst, reg, index, val ) \
- REG_WRITE( reg_##scope##_##reg, \
- (inst) + REG_WR_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_INT
-#define REG_RD_INT( scope, inst, reg ) \
- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_INT
-#define REG_WR_INT( scope, inst, reg, val ) \
- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_RD_INT_VECT
-#define REG_RD_INT_VECT( scope, inst, reg, index ) \
- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-#ifndef REG_WR_INT_VECT
-#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \
- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg, (val) )
-#endif
-
-#ifndef REG_TYPE_CONV
-#define REG_TYPE_CONV( type, orgtype, val ) \
- ( { union { orgtype o; type n; } r; r.o = val; r.n; } )
-#endif
-
-#ifndef reg_page_size
-#define reg_page_size 8192
-#endif
-
-#ifndef REG_ADDR
-#define REG_ADDR( scope, inst, reg ) \
- ( (inst) + REG_RD_ADDR_##scope##_##reg )
-#endif
-
-#ifndef REG_ADDR_VECT
-#define REG_ADDR_VECT( scope, inst, reg, index ) \
- ( (inst) + REG_RD_ADDR_##scope##_##reg + \
- (index) * STRIDE_##scope##_##reg )
-#endif
-
-/* C-code for register scope strmux */
-
-/* Register rw_cfg, scope strmux, type rw */
-typedef struct {
- unsigned int dma0 : 3;
- unsigned int dma1 : 3;
- unsigned int dma2 : 3;
- unsigned int dma3 : 3;
- unsigned int dma4 : 3;
- unsigned int dma5 : 3;
- unsigned int dma6 : 3;
- unsigned int dma7 : 3;
- unsigned int dma8 : 3;
- unsigned int dma9 : 3;
- unsigned int dummy1 : 2;
-} reg_strmux_rw_cfg;
-#define REG_RD_ADDR_strmux_rw_cfg 0
-#define REG_WR_ADDR_strmux_rw_cfg 0
-
-
-/* Constants */
-enum {
- regk_strmux_ata = 0x00000003,
- regk_strmux_eth0 = 0x00000001,
- regk_strmux_eth1 = 0x00000004,
- regk_strmux_ext0 = 0x00000001,
- regk_strmux_ext1 = 0x00000001,
- regk_strmux_ext2 = 0x00000001,
- regk_strmux_ext3 = 0x00000001,
- regk_strmux_iop0 = 0x00000002,
- regk_strmux_iop1 = 0x00000001,
- regk_strmux_off = 0x00000000,
- regk_strmux_p21 = 0x00000004,
- regk_strmux_rw_cfg_default = 0x00000000,
- regk_strmux_ser0 = 0x00000002,
- regk_strmux_ser1 = 0x00000002,
- regk_strmux_ser2 = 0x00000004,
- regk_strmux_ser3 = 0x00000003,
- regk_strmux_sser0 = 0x00000003,
- regk_strmux_sser1 = 0x00000003,
- regk_strmux_strcop = 0x00000002
-};
-#endif /* __strmux_defs_h */
+++ /dev/null
-#ifndef _ASM_CRIS_ARCH_PINMUX_H
-#define _ASM_CRIS_ARCH_PINMUX_H
-
-#define PORT_B 0
-#define PORT_C 1
-#define PORT_D 2
-#define PORT_E 3
-
-enum pin_mode
-{
- pinmux_none = 0,
- pinmux_fixed,
- pinmux_gpio,
- pinmux_iop
-};
-
-enum fixed_function
-{
- pinmux_ser1,
- pinmux_ser2,
- pinmux_ser3,
- pinmux_sser0,
- pinmux_sser1,
- pinmux_ata0,
- pinmux_ata1,
- pinmux_ata2,
- pinmux_ata3,
- pinmux_ata,
- pinmux_eth1,
- pinmux_timer
-};
-
-int crisv32_pinmux_init(void);
-int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode);
-int crisv32_pinmux_alloc_fixed(enum fixed_function function);
-int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin);
-int crisv32_pinmux_dealloc_fixed(enum fixed_function function);
-void crisv32_pinmux_dump(void);
-
-#endif
+++ /dev/null
-#include <asm/arch/spinlock.h>
--- /dev/null
+/*
+ * Copyright © 2008 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+void *
+iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
+
+void
+iounmap_atomic(void *kvaddr, enum km_type type);
#define DRM_I915_GEM_SW_FINISH 0x20
#define DRM_I915_GEM_SET_TILING 0x21
#define DRM_I915_GEM_GET_TILING 0x22
+#define DRM_I915_GEM_GET_APERTURE 0x23
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish)
#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
+#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
uint32_t swizzle_mode;
};
+struct drm_i915_gem_get_aperture {
+ /** Total size of the aperture used by i915_gem_execbuffer, in bytes */
+ uint64_t aper_size;
+
+ /**
+ * Available space in the aperture used by i915_gem_execbuffer, in
+ * bytes
+ */
+ uint64_t aper_available_size;
+};
+
#endif /* _I915_DRM_H_ */
extern int cgroup_init_early(void);
extern int cgroup_init(void);
-extern void cgroup_init_smp(void);
extern void cgroup_lock(void);
extern bool cgroup_lock_live_group(struct cgroup *cgrp);
extern void cgroup_unlock(void);
struct cgroupfs_root *root;
struct list_head sibling;
-
- void *private;
};
#define SUBSYS(_x) extern struct cgroup_subsys _x ## _subsys;
static inline int cgroup_init_early(void) { return 0; }
static inline int cgroup_init(void) { return 0; }
-static inline void cgroup_init_smp(void) {}
static inline void cgroup_fork(struct task_struct *p) {}
static inline void cgroup_fork_callbacks(struct task_struct *p) {}
static inline void cgroup_post_fork(struct task_struct *p) {}
return !(p->flags & PF_FREEZER_NOSIG);
}
-/*
- * Wake up a frozen process
- */
-extern int __thaw_process(struct task_struct *p);
-
/* Takes and releases task alloc lock using task_lock() */
extern int thaw_process(struct task_struct *p);
int (*readpages)(struct file *filp, struct address_space *mapping,
struct list_head *pages, unsigned nr_pages);
- /*
- * ext3 requires that a successful prepare_write() call be followed
- * by a commit_write() call - they must be balanced
- */
- int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
- int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
-
int (*write_begin)(struct file *, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata);
u32 device_flags;
/* board specific information */
u32 board_flags;
- char bus_id[MII_BUS_ID_SIZE];
+ int mdio_bus; /* Bus controlled by us */
+ char bus_id[MII_BUS_ID_SIZE]; /* Bus PHY is on */
u32 phy_id;
u8 mac_addr[6];
phy_interface_t interface;
#define HID_SUSPENDED 5
#define HID_CLEAR_HALT 6
#define HID_DISCONNECTED 7
+#define HID_STARTED 8
struct hid_input {
struct list_head list;
#define __FINIT .previous
#define __INITDATA .section ".init.data","aw"
+#define __INITRODATA .section ".init.rodata","a"
#define __FINITDATA .previous
#define __DEVINIT .section ".devinit.text", "ax"
#define __DEVINITDATA .section ".devinit.data", "aw"
+#define __DEVINITRODATA .section ".devinit.rodata", "a"
#define __CPUINIT .section ".cpuinit.text", "ax"
#define __CPUINITDATA .section ".cpuinit.data", "aw"
+#define __CPUINITRODATA .section ".cpuinit.rodata", "a"
#define __MEMINIT .section ".meminit.text", "ax"
#define __MEMINITDATA .section ".meminit.data", "aw"
+#define __MEMINITRODATA .section ".meminit.rodata", "a"
/* silence warnings when references are OK */
#define __REF .section ".ref.text", "ax"
#define __REFDATA .section ".ref.data", "aw"
-#define __REFCONST .section ".ref.rodata", "aw"
+#define __REFCONST .section ".ref.rodata", "a"
#ifndef __ASSEMBLY__
/*
--- /dev/null
+/*
+ * Copyright © 2008 Keith Packard <keithp@keithp.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _LINUX_IO_MAPPING_H
+#define _LINUX_IO_MAPPING_H
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/iomap.h>
+
+/*
+ * The io_mapping mechanism provides an abstraction for mapping
+ * individual pages from an io device to the CPU in an efficient fashion.
+ *
+ * See Documentation/io_mapping.txt
+ */
+
+/* this struct isn't actually defined anywhere */
+struct io_mapping;
+
+#ifdef CONFIG_HAVE_ATOMIC_IOMAP
+
+/*
+ * For small address space machines, mapping large objects
+ * into the kernel virtual space isn't practical. Where
+ * available, use fixmap support to dynamically map pages
+ * of the object at run time.
+ */
+
+static inline struct io_mapping *
+io_mapping_create_wc(unsigned long base, unsigned long size)
+{
+ return (struct io_mapping *) base;
+}
+
+static inline void
+io_mapping_free(struct io_mapping *mapping)
+{
+}
+
+/* Atomic map/unmap */
+static inline void *
+io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
+{
+ offset += (unsigned long) mapping;
+ return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0,
+ __pgprot(__PAGE_KERNEL_WC));
+}
+
+static inline void
+io_mapping_unmap_atomic(void *vaddr)
+{
+ iounmap_atomic(vaddr, KM_USER0);
+}
+
+static inline void *
+io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
+{
+ offset += (unsigned long) mapping;
+ return ioremap_wc(offset, PAGE_SIZE);
+}
+
+static inline void
+io_mapping_unmap(void *vaddr)
+{
+ iounmap(vaddr);
+}
+
+#else
+
+/* Create the io_mapping object*/
+static inline struct io_mapping *
+io_mapping_create_wc(unsigned long base, unsigned long size)
+{
+ return (struct io_mapping *) ioremap_wc(base, size);
+}
+
+static inline void
+io_mapping_free(struct io_mapping *mapping)
+{
+ iounmap(mapping);
+}
+
+/* Atomic map/unmap */
+static inline void *
+io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
+{
+ return ((char *) mapping) + offset;
+}
+
+static inline void
+io_mapping_unmap_atomic(void *vaddr)
+{
+}
+
+/* Non-atomic map/unmap */
+static inline void *
+io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
+{
+ return ((char *) mapping) + offset;
+}
+
+static inline void
+io_mapping_unmap(void *vaddr)
+{
+}
+
+#endif /* HAVE_ATOMIC_IOMAP */
+
+#endif /* _LINUX_IO_MAPPING_H */
# define might_resched() do { } while (0)
#endif
+#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
+ void __might_sleep(char *file, int line);
/**
* might_sleep - annotation for functions that can sleep
*
* be bitten later when the calling function happens to sleep when it is not
* supposed to.
*/
-#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
- void __might_sleep(char *file, int line);
# define might_sleep() \
do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0)
#else
ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */
+ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
+ ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
+ not multiple of 16 bytes */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
struct hid_device_id {
__u16 bus;
+ __u16 pad1;
__u32 vendor;
__u32 product;
kernel_ulong_t driver_data
/**
* netif_tx_lock - grab network device transmit lock
* @dev: network device
- * @cpu: cpu number of lock owner
*
* Get network device transmit lock
*/
#define _STK_LIM (8*1024*1024)
/*
- * GPG wants 32kB of mlocked memory, to make sure pass phrases
+ * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
* and other sensitive information are never written to disk.
*/
-#define MLOCK_LIMIT (8 * PAGE_SIZE)
+#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
/*
* Due to binary compatibility, the actual resource numbers
int security_settime(struct timespec *ts, struct timezone *tz);
int security_vm_enough_memory(long pages);
int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
+int security_vm_enough_memory_kern(long pages);
int security_bprm_alloc(struct linux_binprm *bprm);
void security_bprm_free(struct linux_binprm *bprm);
void security_bprm_apply_creds(struct linux_binprm *bprm, int unsafe);
return cap_vm_enough_memory(current->mm, pages);
}
+static inline int security_vm_enough_memory_kern(long pages)
+{
+ return cap_vm_enough_memory(current->mm, pages);
+}
+
static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
{
return cap_vm_enough_memory(mm, pages);
* duplex (MicroWire) controllers. Provide chipslect() and txrx_bufs(),
* and custom setup()/cleanup() methods.
*/
+
+#include <linux/workqueue.h>
+
struct spi_bitbang {
struct workqueue_struct *workqueue;
struct work_struct work;
#ifndef _LINUX_STRING_H_
#define _LINUX_STRING_H_
-/* We don't want strings.h stuff being user by user stuff by accident */
+/* We don't want strings.h stuff being used by user stuff by accident */
#ifndef __KERNEL__
#include <string.h>
* ieee80211_beacon_get - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
- * @control: will be filled with information needed to send this beacon.
*
* If the beacon frames are generated by the host system (i.e., not in
* hardware/firmware), the low-level driver uses this function to receive
* ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
* @hw: pointer as obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
- * @control: will be filled with information needed to send returned frame.
*
* Function for accessing buffered broadcast and multicast frames. If
* hardware/firmware does not implement buffering of broadcast/multicast
*
* @keyconf: the parameter passed with the set key
* @skb: the skb for which the key is needed
- * @rc4key: a buffer to which the key will be written
* @type: TBD
- * @key: TBD
+ * @key: a buffer to which the key will be written
*/
void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf,
struct sk_buff *skb,
* @hw: pointer as obtained from ieee80211_alloc_hw().
* @ra: receiver address of the BA session recipient
* @tid: the TID to BA on.
- * @return: success if addBA request was sent, failure otherwise
+ *
+ * Return: success if addBA request was sent, failure otherwise
*
* Although mac80211/low level driver/user space application can estimate
* the need to start aggregation on a certain RA/TID, the session level
* @ra: receiver address of the BA session recipient
* @tid: the TID to stop BA.
* @initiator: if indicates initiator DELBA frame will be sent.
- * @return: error if no sta with matching da found, success otherwise
+ *
+ * Return: error if no sta with matching da found, success otherwise
*
* Although mac80211/low level driver/user space application can estimate
* the need to stop aggregation on a certain RA/TID, the session level
extern int register_pernet_subsys(struct pernet_operations *);
extern void unregister_pernet_subsys(struct pernet_operations *);
+extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
+extern void unregister_pernet_gen_subsys(int id, struct pernet_operations *);
extern int register_pernet_device(struct pernet_operations *);
extern void unregister_pernet_device(struct pernet_operations *);
extern int register_pernet_gen_device(int *id, struct pernet_operations *);
/**
* sk_filter_release: Release a socket filter
- * @sk: socket
* @fp: filter to remove
*
* Remove a filter from a socket and release its resources.
*/
#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = xshift, .max = xmax, .invert = xinvert})
+ {.reg = xreg, .shift = xshift, .rshift = xshift, .max = xmax, \
+ .invert = xinvert})
#define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .max = xmax, .invert = xinvert})
depends on CGROUPS && RESOURCE_COUNTERS
select MM_OWNER
help
- Provides a memory resource controller that manages both page cache and
- RSS memory.
+ Provides a memory resource controller that manages both anonymous
+ memory and page cache. (See Documentation/controllers/memory.txt)
Note that setting this option increases fixed memory overhead
- associated with each page of memory in the system by 4/8 bytes
- and also increases cache misses because struct page on many 64bit
- systems will not fit into a single cache line anymore.
+ associated with each page of memory in the system. By this,
+ 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
+ usage tracking struct at boot. Total amount of this is printed out
+ at boot.
Only enable when you're ok with these trade offs and really
- sure you need the memory resource controller.
+ sure you need the memory resource controller. Even when you enable
+ this, you can set "cgroup_disable=memory" at your boot option to
+ disable memory resource controller and you can avoid overheads.
+ (and lose benefits of memory resource contoller)
This config option also selects MM_OWNER config option, which
could in turn add some fork/exit overhead.
-
-#include <linux/raid/md.h>
#include <linux/delay.h>
+#include <linux/raid/md.h>
#include "do_mounts.h"
struct task_struct *task)
{
struct freezer *freezer;
- int retval;
- /* Anything frozen can't move or be moved to/from */
+ /*
+ * Anything frozen can't move or be moved to/from.
+ *
+ * Since orig_freezer->state == FROZEN means that @task has been
+ * frozen, so it's sufficient to check the latter condition.
+ */
if (is_task_frozen_enough(task))
return -EBUSY;
if (freezer->state == CGROUP_FROZEN)
return -EBUSY;
- retval = 0;
- task_lock(task);
- freezer = task_freezer(task);
- if (freezer->state == CGROUP_FROZEN)
- retval = -EBUSY;
- task_unlock(task);
- return retval;
+ return 0;
}
static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task)
freezer = task_freezer(task);
task_unlock(task);
- BUG_ON(freezer->state == CGROUP_FROZEN);
spin_lock_irq(&freezer->lock);
+ BUG_ON(freezer->state == CGROUP_FROZEN);
+
/* Locking avoids race with FREEZING -> THAWED transitions. */
if (freezer->state == CGROUP_FREEZING)
freeze_task(task, true);
return num_cant_freeze_now ? -EBUSY : 0;
}
-static int unfreeze_cgroup(struct cgroup *cgroup, struct freezer *freezer)
+static void unfreeze_cgroup(struct cgroup *cgroup, struct freezer *freezer)
{
struct cgroup_iter it;
struct task_struct *task;
cgroup_iter_start(cgroup, &it);
while ((task = cgroup_iter_next(cgroup, &it))) {
- int do_wake;
-
- task_lock(task);
- do_wake = __thaw_process(task);
- task_unlock(task);
- if (do_wake)
- wake_up_process(task);
+ thaw_process(task);
}
cgroup_iter_end(cgroup, &it);
- freezer->state = CGROUP_THAWED;
- return 0;
+ freezer->state = CGROUP_THAWED;
}
static int freezer_change_state(struct cgroup *cgroup,
int retval = 0;
freezer = cgroup_freezer(cgroup);
+
spin_lock_irq(&freezer->lock);
+
update_freezer_state(cgroup, freezer);
if (goal_state == freezer->state)
goto out;
- switch (freezer->state) {
+
+ switch (goal_state) {
case CGROUP_THAWED:
- retval = try_to_freeze_cgroup(cgroup, freezer);
+ unfreeze_cgroup(cgroup, freezer);
break;
- case CGROUP_FREEZING:
- if (goal_state == CGROUP_FROZEN) {
- /* Userspace is retrying after
- * "/bin/echo FROZEN > freezer.state" returned -EBUSY */
- retval = try_to_freeze_cgroup(cgroup, freezer);
- break;
- }
- /* state == FREEZING and goal_state == THAWED, so unfreeze */
case CGROUP_FROZEN:
- retval = unfreeze_cgroup(cgroup, freezer);
+ retval = try_to_freeze_cgroup(cgroup, freezer);
break;
default:
- break;
+ BUG();
}
out:
spin_unlock_irq(&freezer->lock);
}
}
-/*
- * Wake up a frozen process
- *
- * task_lock() is needed to prevent the race with refrigerator() which may
- * occur if the freezing of tasks fails. Namely, without the lock, if the
- * freezing of tasks failed, thaw_tasks() might have run before a task in
- * refrigerator() could call frozen_process(), in which case the task would be
- * frozen and no one would thaw it.
- */
-int __thaw_process(struct task_struct *p)
+static int __thaw_process(struct task_struct *p)
{
if (frozen(p)) {
p->flags &= ~PF_FROZEN;
return 0;
}
+/*
+ * Wake up a frozen process
+ *
+ * task_lock() is needed to prevent the race with refrigerator() which may
+ * occur if the freezing of tasks fails. Namely, without the lock, if the
+ * freezing of tasks failed, thaw_tasks() might have run before a task in
+ * refrigerator() could call frozen_process(), in which case the task would be
+ * frozen and no one would thaw it.
+ */
int thaw_process(struct task_struct *p)
{
task_lock(p);
config PM_TEST_SUSPEND
bool "Test suspend/resume and wakealarm during bootup"
- depends on SUSPEND && PM_DEBUG && RTC_LIB=y
+ depends on SUSPEND && PM_DEBUG && RTC_CLASS=y
---help---
This option will let you suspend your machine during bootup, and
make it wake up a few seconds later using an RTC wakeup alarm.
__setup("profile=", profile_setup);
-int profile_init(void)
+int __ref profile_init(void)
{
int buffer_bytes;
if (!prof_on)
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/device.h>
+#include <linux/pfn.h>
#include <asm/io.h>
{
struct resource *parent = root;
struct resource *conflict;
- struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL);
+ struct resource *res = kzalloc(sizeof(*res), GFP_ATOMIC);
if (!res)
return;
continue;
if (p->end < addr)
continue;
- if (p->start <= addr && (p->end >= addr + size - 1))
+ if (PFN_DOWN(p->start) <= PFN_DOWN(addr) &&
+ PFN_DOWN(p->end) >= PFN_DOWN(addr + size - 1))
continue;
printk(KERN_WARNING "resource map sanity check conflict: "
"0x%llx 0x%llx 0x%llx 0x%llx %s\n",
{
struct proc_dir_entry *pe;
- pe = proc_create("sched_debug", 0644, NULL, &sched_debug_fops);
+ pe = proc_create("sched_debug", 0444, NULL, &sched_debug_fops);
if (!pe)
return -ENOMEM;
return 0;
struct task_struct * p;
for_each_process(p) {
- if (p->pid > 1 && !same_thread_group(p, current)) {
+ if (task_pid_vnr(p) > 1 &&
+ !same_thread_group(p, current)) {
int err = group_send_sig_info(sig, info, p);
++count;
if (err != -EPERM)
config HAVE_FUNCTION_TRACER
bool
- select NOP_TRACER
config HAVE_DYNAMIC_FTRACE
bool
bool
select DEBUG_FS
select RING_BUFFER
- select STACKTRACE
+ select STACKTRACE if STACKTRACE_SUPPORT
select TRACEPOINTS
+ select NOP_TRACER
menu "Tracers"
}
#else
+
+static int __init ftrace_nodyn_init(void)
+{
+ ftrace_enabled = 1;
+ return 0;
+}
+device_initcall(ftrace_nodyn_init);
+
# define ftrace_startup() do { } while (0)
# define ftrace_shutdown() do { } while (0)
# define ftrace_startup_sysctl() do { } while (0)
struct ring_buffer_event *event;
u64 ts, delta;
int commit = 0;
+ int nr_loops = 0;
again:
+ /*
+ * We allow for interrupts to reenter here and do a trace.
+ * If one does, it will cause this original code to loop
+ * back here. Even with heavy interrupts happening, this
+ * should only happen a few times in a row. If this happens
+ * 1000 times in a row, there must be either an interrupt
+ * storm or we have something buggy.
+ * Bail!
+ */
+ if (unlikely(++nr_loops > 1000)) {
+ RB_WARN_ON(cpu_buffer, 1);
+ return NULL;
+ }
+
ts = ring_buffer_time_stamp(cpu_buffer->cpu);
/*
{
struct buffer_page *reader = NULL;
unsigned long flags;
+ int nr_loops = 0;
spin_lock_irqsave(&cpu_buffer->lock, flags);
again:
+ /*
+ * This should normally only loop twice. But because the
+ * start of the reader inserts an empty page, it causes
+ * a case where we will loop three times. There should be no
+ * reason to loop four times (that I know of).
+ */
+ if (unlikely(++nr_loops > 3)) {
+ RB_WARN_ON(cpu_buffer, 1);
+ reader = NULL;
+ goto out;
+ }
+
reader = cpu_buffer->reader_page;
/* If there's more to read, return this page */
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event;
struct buffer_page *reader;
+ int nr_loops = 0;
if (!cpu_isset(cpu, buffer->cpumask))
return NULL;
cpu_buffer = buffer->buffers[cpu];
again:
+ /*
+ * We repeat when a timestamp is encountered. It is possible
+ * to get multiple timestamps from an interrupt entering just
+ * as one timestamp is about to be written. The max times
+ * that this can happen is the number of nested interrupts we
+ * can have. Nesting 10 deep of interrupts is clearly
+ * an anomaly.
+ */
+ if (unlikely(++nr_loops > 10)) {
+ RB_WARN_ON(cpu_buffer, 1);
+ return NULL;
+ }
+
reader = rb_get_reader_page(cpu_buffer);
if (!reader)
return NULL;
struct ring_buffer *buffer;
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event;
+ int nr_loops = 0;
if (ring_buffer_iter_empty(iter))
return NULL;
buffer = cpu_buffer->buffer;
again:
+ /*
+ * We repeat when a timestamp is encountered. It is possible
+ * to get multiple timestamps from an interrupt entering just
+ * as one timestamp is about to be written. The max times
+ * that this can happen is the number of nested interrupts we
+ * can have. Nesting 10 deep of interrupts is clearly
+ * an anomaly.
+ */
+ if (unlikely(++nr_loops > 10)) {
+ RB_WARN_ON(cpu_buffer, 1);
+ return NULL;
+ }
+
if (rb_per_cpu_empty(cpu_buffer))
return NULL;
entry->preempt_count = pc & 0xff;
entry->pid = (tsk) ? tsk->pid : 0;
entry->flags =
+#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
(irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) |
+#else
+ TRACE_FLAG_IRQS_NOSUPPORT |
+#endif
((pc & HARDIRQ_MASK) ? TRACE_FLAG_HARDIRQ : 0) |
((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) |
(need_resched() ? TRACE_FLAG_NEED_RESCHED : 0);
unsigned long flags,
int skip, int pc)
{
+#ifdef CONFIG_STACKTRACE
struct ring_buffer_event *event;
struct stack_entry *entry;
struct stack_trace trace;
save_stack_trace(&trace);
ring_buffer_unlock_commit(tr->buffer, event, irq_flags);
+#endif
}
void __trace_stack(struct trace_array *tr,
mutex_unlock(&trace_types_lock);
}
-#define KRETPROBE_MSG "[unknown/kretprobe'd]"
-
#ifdef CONFIG_KRETPROBES
-static inline int kretprobed(unsigned long addr)
+static inline const char *kretprobed(const char *name)
{
- return addr == (unsigned long)kretprobe_trampoline;
+ static const char tramp_name[] = "kretprobe_trampoline";
+ int size = sizeof(tramp_name);
+
+ if (strncmp(tramp_name, name, size) == 0)
+ return "[unknown/kretprobe'd]";
+ return name;
}
#else
-static inline int kretprobed(unsigned long addr)
+static inline const char *kretprobed(const char *name)
{
- return 0;
+ return name;
}
#endif /* CONFIG_KRETPROBES */
{
#ifdef CONFIG_KALLSYMS
char str[KSYM_SYMBOL_LEN];
+ const char *name;
kallsyms_lookup(address, NULL, NULL, NULL, str);
- return trace_seq_printf(s, fmt, str);
+ name = kretprobed(str);
+
+ return trace_seq_printf(s, fmt, name);
#endif
return 1;
}
{
#ifdef CONFIG_KALLSYMS
char str[KSYM_SYMBOL_LEN];
+ const char *name;
sprint_symbol(str, address);
- return trace_seq_printf(s, fmt, str);
+ name = kretprobed(str);
+
+ return trace_seq_printf(s, fmt, name);
#endif
return 1;
}
trace_seq_printf(s, "%8.8s-%-5d ", comm, entry->pid);
trace_seq_printf(s, "%3d", cpu);
trace_seq_printf(s, "%c%c",
- (entry->flags & TRACE_FLAG_IRQS_OFF) ? 'd' : '.',
+ (entry->flags & TRACE_FLAG_IRQS_OFF) ? 'd' :
+ (entry->flags & TRACE_FLAG_IRQS_NOSUPPORT) ? 'X' : '.',
((entry->flags & TRACE_FLAG_NEED_RESCHED) ? 'N' : '.'));
hardirq = entry->flags & TRACE_FLAG_HARDIRQ;
seq_print_ip_sym(s, field->ip, sym_flags);
trace_seq_puts(s, " (");
- if (kretprobed(field->parent_ip))
- trace_seq_puts(s, KRETPROBE_MSG);
- else
- seq_print_ip_sym(s, field->parent_ip, sym_flags);
+ seq_print_ip_sym(s, field->parent_ip, sym_flags);
trace_seq_puts(s, ")\n");
break;
}
ret = trace_seq_printf(s, " <-");
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
- if (kretprobed(field->parent_ip))
- ret = trace_seq_puts(s, KRETPROBE_MSG);
- else
- ret = seq_print_ip_sym(s,
- field->parent_ip,
- sym_flags);
+ ret = seq_print_ip_sym(s,
+ field->parent_ip,
+ sym_flags);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
}
/*
* trace_flag_type is an enumeration that holds different
* states when a trace occurs. These are:
- * IRQS_OFF - interrupts were disabled
- * NEED_RESCED - reschedule is requested
- * HARDIRQ - inside an interrupt handler
- * SOFTIRQ - inside a softirq handler
- * CONT - multiple entries hold the trace item
+ * IRQS_OFF - interrupts were disabled
+ * IRQS_NOSUPPORT - arch does not support irqs_disabled_flags
+ * NEED_RESCED - reschedule is requested
+ * HARDIRQ - inside an interrupt handler
+ * SOFTIRQ - inside a softirq handler
+ * CONT - multiple entries hold the trace item
*/
enum trace_flag_type {
TRACE_FLAG_IRQS_OFF = 0x01,
- TRACE_FLAG_NEED_RESCHED = 0x02,
- TRACE_FLAG_HARDIRQ = 0x04,
- TRACE_FLAG_SOFTIRQ = 0x08,
- TRACE_FLAG_CONT = 0x10,
+ TRACE_FLAG_IRQS_NOSUPPORT = 0x02,
+ TRACE_FLAG_NEED_RESCHED = 0x04,
+ TRACE_FLAG_HARDIRQ = 0x08,
+ TRACE_FLAG_SOFTIRQ = 0x10,
+ TRACE_FLAG_CONT = 0x20,
};
#define TRACE_BUF_SIZE 1024
iter->logical_modname,
iter->flag_names, iter->hash, iter->hash2);
}
+ if (dynamic_enabled == DYNAMIC_ENABLED_ALL)
+ set_all(true);
return 0;
}
module_init(dynamic_printk_init);
{
if (str)
return -ENOENT;
- set_all(true);
+ dynamic_enabled = DYNAMIC_ENABLED_ALL;
return 0;
}
/* Use early_param(), so we can get debug output as early as possible */
{
const struct address_space_operations *aops = mapping->a_ops;
- if (aops->write_begin) {
- return aops->write_begin(file, mapping, pos, len, flags,
+ return aops->write_begin(file, mapping, pos, len, flags,
pagep, fsdata);
- } else {
- int ret;
- pgoff_t index = pos >> PAGE_CACHE_SHIFT;
- unsigned offset = pos & (PAGE_CACHE_SIZE - 1);
- struct inode *inode = mapping->host;
- struct page *page;
-again:
- page = __grab_cache_page(mapping, index);
- *pagep = page;
- if (!page)
- return -ENOMEM;
-
- if (flags & AOP_FLAG_UNINTERRUPTIBLE && !PageUptodate(page)) {
- /*
- * There is no way to resolve a short write situation
- * for a !Uptodate page (except by double copying in
- * the caller done by generic_perform_write_2copy).
- *
- * Instead, we have to bring it uptodate here.
- */
- ret = aops->readpage(file, page);
- page_cache_release(page);
- if (ret) {
- if (ret == AOP_TRUNCATED_PAGE)
- goto again;
- return ret;
- }
- goto again;
- }
-
- ret = aops->prepare_write(file, page, offset, offset+len);
- if (ret) {
- unlock_page(page);
- page_cache_release(page);
- if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
- }
- return ret;
- }
}
EXPORT_SYMBOL(pagecache_write_begin);
struct page *page, void *fsdata)
{
const struct address_space_operations *aops = mapping->a_ops;
- int ret;
-
- if (aops->write_end) {
- mark_page_accessed(page);
- ret = aops->write_end(file, mapping, pos, len, copied,
- page, fsdata);
- } else {
- unsigned offset = pos & (PAGE_CACHE_SIZE - 1);
- struct inode *inode = mapping->host;
-
- flush_dcache_page(page);
- ret = aops->commit_write(file, page, offset, offset+len);
- unlock_page(page);
- mark_page_accessed(page);
- page_cache_release(page);
-
- if (ret < 0) {
- if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
- } else if (ret > 0)
- ret = min_t(size_t, copied, ret);
- else
- ret = copied;
- }
- return ret;
+ mark_page_accessed(page);
+ return aops->write_end(file, mapping, pos, len, copied, page, fsdata);
}
EXPORT_SYMBOL(pagecache_write_end);
}
EXPORT_SYMBOL(__grab_cache_page);
-static ssize_t generic_perform_write_2copy(struct file *file,
- struct iov_iter *i, loff_t pos)
-{
- struct address_space *mapping = file->f_mapping;
- const struct address_space_operations *a_ops = mapping->a_ops;
- struct inode *inode = mapping->host;
- long status = 0;
- ssize_t written = 0;
-
- do {
- struct page *src_page;
- struct page *page;
- pgoff_t index; /* Pagecache index for current page */
- unsigned long offset; /* Offset into pagecache page */
- unsigned long bytes; /* Bytes to write to page */
- size_t copied; /* Bytes copied from user */
-
- offset = (pos & (PAGE_CACHE_SIZE - 1));
- index = pos >> PAGE_CACHE_SHIFT;
- bytes = min_t(unsigned long, PAGE_CACHE_SIZE - offset,
- iov_iter_count(i));
-
- /*
- * a non-NULL src_page indicates that we're doing the
- * copy via get_user_pages and kmap.
- */
- src_page = NULL;
-
- /*
- * Bring in the user page that we will copy from _first_.
- * Otherwise there's a nasty deadlock on copying from the
- * same page as we're writing to, without it being marked
- * up-to-date.
- *
- * Not only is this an optimisation, but it is also required
- * to check that the address is actually valid, when atomic
- * usercopies are used, below.
- */
- if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
- status = -EFAULT;
- break;
- }
-
- page = __grab_cache_page(mapping, index);
- if (!page) {
- status = -ENOMEM;
- break;
- }
-
- /*
- * non-uptodate pages cannot cope with short copies, and we
- * cannot take a pagefault with the destination page locked.
- * So pin the source page to copy it.
- */
- if (!PageUptodate(page) && !segment_eq(get_fs(), KERNEL_DS)) {
- unlock_page(page);
-
- src_page = alloc_page(GFP_KERNEL);
- if (!src_page) {
- page_cache_release(page);
- status = -ENOMEM;
- break;
- }
-
- /*
- * Cannot get_user_pages with a page locked for the
- * same reason as we can't take a page fault with a
- * page locked (as explained below).
- */
- copied = iov_iter_copy_from_user(src_page, i,
- offset, bytes);
- if (unlikely(copied == 0)) {
- status = -EFAULT;
- page_cache_release(page);
- page_cache_release(src_page);
- break;
- }
- bytes = copied;
-
- lock_page(page);
- /*
- * Can't handle the page going uptodate here, because
- * that means we would use non-atomic usercopies, which
- * zero out the tail of the page, which can cause
- * zeroes to become transiently visible. We could just
- * use a non-zeroing copy, but the APIs aren't too
- * consistent.
- */
- if (unlikely(!page->mapping || PageUptodate(page))) {
- unlock_page(page);
- page_cache_release(page);
- page_cache_release(src_page);
- continue;
- }
- }
-
- status = a_ops->prepare_write(file, page, offset, offset+bytes);
- if (unlikely(status))
- goto fs_write_aop_error;
-
- if (!src_page) {
- /*
- * Must not enter the pagefault handler here, because
- * we hold the page lock, so we might recursively
- * deadlock on the same lock, or get an ABBA deadlock
- * against a different lock, or against the mmap_sem
- * (which nests outside the page lock). So increment
- * preempt count, and use _atomic usercopies.
- *
- * The page is uptodate so we are OK to encounter a
- * short copy: if unmodified parts of the page are
- * marked dirty and written out to disk, it doesn't
- * really matter.
- */
- pagefault_disable();
- copied = iov_iter_copy_from_user_atomic(page, i,
- offset, bytes);
- pagefault_enable();
- } else {
- void *src, *dst;
- src = kmap_atomic(src_page, KM_USER0);
- dst = kmap_atomic(page, KM_USER1);
- memcpy(dst + offset, src + offset, bytes);
- kunmap_atomic(dst, KM_USER1);
- kunmap_atomic(src, KM_USER0);
- copied = bytes;
- }
- flush_dcache_page(page);
-
- status = a_ops->commit_write(file, page, offset, offset+bytes);
- if (unlikely(status < 0))
- goto fs_write_aop_error;
- if (unlikely(status > 0)) /* filesystem did partial write */
- copied = min_t(size_t, copied, status);
-
- unlock_page(page);
- mark_page_accessed(page);
- page_cache_release(page);
- if (src_page)
- page_cache_release(src_page);
-
- iov_iter_advance(i, copied);
- pos += copied;
- written += copied;
-
- balance_dirty_pages_ratelimited(mapping);
- cond_resched();
- continue;
-
-fs_write_aop_error:
- unlock_page(page);
- page_cache_release(page);
- if (src_page)
- page_cache_release(src_page);
-
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
- */
- if (pos + bytes > inode->i_size)
- vmtruncate(inode, inode->i_size);
- break;
- } while (iov_iter_count(i));
-
- return written ? written : status;
-}
-
static ssize_t generic_perform_write(struct file *file,
struct iov_iter *i, loff_t pos)
{
struct iov_iter i;
iov_iter_init(&i, iov, nr_segs, count, written);
- if (a_ops->write_begin)
- status = generic_perform_write(file, &i, pos);
- else
- status = generic_perform_write_2copy(file, &i, pos);
+ status = generic_perform_write(file, &i, pos);
if (likely(status >= 0)) {
written += status;
/* Don't let a single process grow too big:
leave 3% of the size of this process for other processes */
- allowed -= mm->total_vm / 32;
+ if (mm)
+ allowed -= mm->total_vm / 32;
/*
* cast `allowed' as a signed long because vm_committed_space
/* Don't let a single process grow too big:
leave 3% of the size of this process for other processes */
- allowed -= current->mm->total_vm / 32;
+ if (mm)
+ allowed -= mm->total_vm / 32;
/*
* cast `allowed' as a signed long because vm_committed_space
*/
static inline int shmem_acct_size(unsigned long flags, loff_t size)
{
- return (flags & VM_ACCOUNT)?
- security_vm_enough_memory(VM_ACCT(size)): 0;
+ return (flags & VM_ACCOUNT) ?
+ security_vm_enough_memory_kern(VM_ACCT(size)) : 0;
}
static inline void shmem_unacct_size(unsigned long flags, loff_t size)
*/
static inline int shmem_acct_block(unsigned long flags)
{
- return (flags & VM_ACCOUNT)?
- 0: security_vm_enough_memory(VM_ACCT(PAGE_CACHE_SIZE));
+ return (flags & VM_ACCOUNT) ?
+ 0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE));
}
static inline void shmem_unacct_blocks(unsigned long flags, long pages)
* @count: number of pages
* @node: prefer to allocate data structures on this node
* @prot: memory protection to use. PAGE_KERNEL for regular RAM
- * @returns: a pointer to the address that has been mapped, or NULL on failure
+ *
+ * Returns: a pointer to the address that has been mapped, or %NULL on failure
*/
void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
{
}
EXPORT_SYMBOL_GPL(unregister_pernet_subsys);
+int register_pernet_gen_subsys(int *id, struct pernet_operations *ops)
+{
+ int rv;
+
+ mutex_lock(&net_mutex);
+again:
+ rv = ida_get_new_above(&net_generic_ids, 1, id);
+ if (rv < 0) {
+ if (rv == -EAGAIN) {
+ ida_pre_get(&net_generic_ids, GFP_KERNEL);
+ goto again;
+ }
+ goto out;
+ }
+ rv = register_pernet_operations(first_device, ops);
+ if (rv < 0)
+ ida_remove(&net_generic_ids, *id);
+ mutex_unlock(&net_mutex);
+out:
+ return rv;
+}
+EXPORT_SYMBOL_GPL(register_pernet_gen_subsys);
+
+void unregister_pernet_gen_subsys(int id, struct pernet_operations *ops)
+{
+ mutex_lock(&net_mutex);
+ unregister_pernet_operations(ops);
+ ida_remove(&net_generic_ids, id);
+ mutex_unlock(&net_mutex);
+}
+EXPORT_SYMBOL_GPL(unregister_pernet_gen_subsys);
+
/**
* register_pernet_device - register a network namespace device
* @ops: pernet operations structure for the subsystem
/* make sure that we don't pick a non-existing transmit queue */
ntxq = pkt_dev->odev->real_num_tx_queues;
- if (ntxq <= num_online_cpus() && (pkt_dev->flags & F_QUEUE_MAP_CPU)) {
+ if (ntxq > num_online_cpus() && (pkt_dev->flags & F_QUEUE_MAP_CPU)) {
printk(KERN_WARNING "pktgen: WARNING: QUEUE_MAP_CPU "
- "disabled because CPU count (%d) exceeds number ",
- num_online_cpus());
- printk(KERN_WARNING "pktgen: WARNING: of tx queues "
- "(%d) on %s \n", ntxq, pkt_dev->odev->name);
+ "disabled because CPU count (%d) exceeds number "
+ "of tx queues (%d) on %s\n", num_online_cpus(), ntxq,
+ pkt_dev->odev->name);
pkt_dev->flags &= ~F_QUEUE_MAP_CPU;
}
if (ntxq <= pkt_dev->queue_map_min) {
printk(KERN_WARNING "pktgen: WARNING: Requested "
- "queue_map_min (%d) exceeds number of tx\n",
- pkt_dev->queue_map_min);
- printk(KERN_WARNING "pktgen: WARNING: queues (%d) on "
- "%s, resetting\n", ntxq, pkt_dev->odev->name);
+ "queue_map_min (zero-based) (%d) exceeds valid range "
+ "[0 - %d] for (%d) queues on %s, resetting\n",
+ pkt_dev->queue_map_min, (ntxq ?: 1)- 1, ntxq,
+ pkt_dev->odev->name);
pkt_dev->queue_map_min = ntxq - 1;
}
- if (ntxq <= pkt_dev->queue_map_max) {
+ if (pkt_dev->queue_map_max >= ntxq) {
printk(KERN_WARNING "pktgen: WARNING: Requested "
- "queue_map_max (%d) exceeds number of tx\n",
- pkt_dev->queue_map_max);
- printk(KERN_WARNING "pktgen: WARNING: queues (%d) on "
- "%s, resetting\n", ntxq, pkt_dev->odev->name);
+ "queue_map_max (zero-based) (%d) exceeds valid range "
+ "[0 - %d] for (%d) queues on %s, resetting\n",
+ pkt_dev->queue_map_max, (ntxq ?: 1)- 1, ntxq,
+ pkt_dev->odev->name);
pkt_dev->queue_map_max = ntxq - 1;
}
__kfree_skb(skb);
}
+/**
+ * skb_recycle_check - check if skb can be reused for receive
+ * @skb: buffer
+ * @skb_size: minimum receive buffer size
+ *
+ * Checks that the skb passed in is not shared or cloned, and
+ * that it is linear and its head portion at least as large as
+ * skb_size so that it can be recycled as a receive buffer.
+ * If these conditions are met, this function does any necessary
+ * reference count dropping and cleans up the skbuff as if it
+ * just came from __alloc_skb().
+ */
int skb_recycle_check(struct sk_buff *skb, int skb_size)
{
struct skb_shared_info *shinfo;
u32 opt_len;
int len_delta;
- buf_len = cipso_v4_genopt(buf, buf_len, doi_def, secattr);
- if (buf_len < 0)
- return buf_len;
+ ret_val = cipso_v4_genopt(buf, buf_len, doi_def, secattr);
+ if (ret_val < 0)
+ return ret_val;
+ buf_len = ret_val;
opt_len = (buf_len + 3) & ~3;
/* we overwrite any existing options to ensure that we have enough
}
EXPORT_SYMBOL_GPL(udp4_lib_lookup);
-static inline struct sock *udp_v4_mcast_next(struct sock *sk,
+static inline struct sock *udp_v4_mcast_next(struct net *net, struct sock *sk,
__be16 loc_port, __be32 loc_addr,
__be16 rmt_port, __be32 rmt_addr,
int dif)
sk_for_each_from(s, node) {
struct inet_sock *inet = inet_sk(s);
- if (s->sk_hash != hnum ||
+ if (!net_eq(sock_net(s), net) ||
+ s->sk_hash != hnum ||
(inet->daddr && inet->daddr != rmt_addr) ||
(inet->dport != rmt_port && inet->dport) ||
(inet->rcv_saddr && inet->rcv_saddr != loc_addr) ||
read_lock(&udp_hash_lock);
sk = sk_head(&udptable[udp_hashfn(net, ntohs(uh->dest))]);
dif = skb->dev->ifindex;
- sk = udp_v4_mcast_next(sk, uh->dest, daddr, uh->source, saddr, dif);
+ sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
if (sk) {
struct sock *sknext = NULL;
do {
struct sk_buff *skb1 = skb;
- sknext = udp_v4_mcast_next(sk_next(sk), uh->dest, daddr,
- uh->source, saddr, dif);
+ sknext = udp_v4_mcast_next(net, sk_next(sk), uh->dest,
+ daddr, uh->source, saddr,
+ dif);
if (sknext)
skb1 = skb_clone(skb, GFP_ATOMIC);
int peeked;
int err;
int is_udplite = IS_UDPLITE(sk);
+ int is_udp4;
if (addr_len)
*addr_len=sizeof(struct sockaddr_in6);
else if (copied < ulen)
msg->msg_flags |= MSG_TRUNC;
+ is_udp4 = (skb->protocol == htons(ETH_P_IP));
+
/*
* If checksum is needed at all, try to do it while copying the
* data. If the data is truncated, or if we only want a partial
if (err)
goto out_free;
- if (!peeked)
- UDP6_INC_STATS_USER(sock_net(sk),
- UDP_MIB_INDATAGRAMS, is_udplite);
+ if (!peeked) {
+ if (is_udp4)
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INDATAGRAMS, is_udplite);
+ else
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INDATAGRAMS, is_udplite);
+ }
sock_recv_timestamp(msg, sk, skb);
sin6->sin6_flowinfo = 0;
sin6->sin6_scope_id = 0;
- if (skb->protocol == htons(ETH_P_IP))
+ if (is_udp4)
ipv6_addr_set(&sin6->sin6_addr, 0, 0,
htonl(0xffff), ip_hdr(skb)->saddr);
else {
}
}
- if (skb->protocol == htons(ETH_P_IP)) {
+ if (is_udp4) {
if (inet->cmsg_flags)
ip_cmsg_recv(msg, skb);
} else {
csum_copy_err:
lock_sock(sk);
- if (!skb_kill_datagram(sk, skb, flags))
- UDP6_INC_STATS_USER(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+ if (!skb_kill_datagram(sk, skb, flags)) {
+ if (is_udp4)
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS, is_udplite);
+ else
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS, is_udplite);
+ }
release_sock(sk);
if (flags & MSG_DONTWAIT)
return -1;
}
-static struct sock *udp_v6_mcast_next(struct sock *sk,
+static struct sock *udp_v6_mcast_next(struct net *net, struct sock *sk,
__be16 loc_port, struct in6_addr *loc_addr,
__be16 rmt_port, struct in6_addr *rmt_addr,
int dif)
sk_for_each_from(s, node) {
struct inet_sock *inet = inet_sk(s);
- if (sock_net(s) != sock_net(sk))
+ if (!net_eq(sock_net(s), net))
continue;
if (s->sk_hash == num && s->sk_family == PF_INET6) {
read_lock(&udp_hash_lock);
sk = sk_head(&udptable[udp_hashfn(net, ntohs(uh->dest))]);
dif = inet6_iif(skb);
- sk = udp_v6_mcast_next(sk, uh->dest, daddr, uh->source, saddr, dif);
+ sk = udp_v6_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
if (!sk) {
kfree_skb(skb);
goto out;
}
sk2 = sk;
- while ((sk2 = udp_v6_mcast_next(sk_next(sk2), uh->dest, daddr,
+ while ((sk2 = udp_v6_mcast_next(net, sk_next(sk2), uh->dest, daddr,
uh->source, saddr, dif))) {
struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC);
if (buff) {
req_size += socklen * 2;
} else {
size -= 2*socklen;
- socklen = 0;
}
rq = (void*)skb_put(skb, req_size);
pol->sadb_x_policy_len += req_size/8;
prob / 10, prob % 10,
mr->last_success,
mr->last_attempts,
- mr->succ_hist,
- mr->att_hist);
+ (unsigned long long)mr->succ_hist,
+ (unsigned long long)mr->att_hist);
}
p += sprintf(p, "\nTotal packet count:: ideal %d "
"lookaround %d\n\n",
return 0;
}
-static int
+static ssize_t
minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *o)
{
struct minstrel_stats_info *ms;
rv = nf_conntrack_l4proto_register(&nf_conntrack_l4proto_gre4);
if (rv < 0)
return rv;
- rv = register_pernet_gen_device(&proto_gre_net_id, &proto_gre_net_ops);
+ rv = register_pernet_gen_subsys(&proto_gre_net_id, &proto_gre_net_ops);
if (rv < 0)
nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_gre4);
return rv;
static void nf_ct_proto_gre_fini(void)
{
nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_gre4);
- unregister_pernet_gen_device(proto_gre_net_id, &proto_gre_net_ops);
+ unregister_pernet_gen_subsys(proto_gre_net_id, &proto_gre_net_ops);
}
module_init(nf_ct_proto_gre_init);
* Audit Helper Functions
*/
+#ifdef CONFIG_AUDIT
/**
* netlbl_af4list_audit_addr - Audit an IPv4 address
* @audit_buf: audit buffer
}
}
#endif /* IPv6 */
+#endif /* CONFIG_AUDIT */
struct netlbl_af4list *netlbl_af4list_search_exact(__be32 addr,
__be32 mask,
struct list_head *head);
+
+#ifdef CONFIG_AUDIT
void netlbl_af4list_audit_addr(struct audit_buffer *audit_buf,
int src, const char *dev,
__be32 addr, __be32 mask);
+#else
+static inline void netlbl_af4list_audit_addr(struct audit_buffer *audit_buf,
+ int src, const char *dev,
+ __be32 addr, __be32 mask)
+{
+ return;
+}
+#endif
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
struct netlbl_af6list *netlbl_af6list_search_exact(const struct in6_addr *addr,
const struct in6_addr *mask,
struct list_head *head);
+
+#ifdef CONFIG_AUDIT
void netlbl_af6list_audit_addr(struct audit_buffer *audit_buf,
int src,
const char *dev,
const struct in6_addr *addr,
const struct in6_addr *mask);
+#else
+static inline void netlbl_af6list_audit_addr(struct audit_buffer *audit_buf,
+ int src,
+ const char *dev,
+ const struct in6_addr *addr,
+ const struct in6_addr *mask)
+{
+ return;
+}
+#endif
#endif /* IPV6 */
#endif
static int netlbl_mgmt_listentry(struct sk_buff *skb,
struct netlbl_dom_map *entry)
{
- int ret_val;
+ int ret_val = 0;
struct nlattr *nla_a;
struct nlattr *nla_b;
struct netlbl_af4list *iter4;
static int __init rfkill_handler_init(void)
{
+ unsigned long last_run = jiffies - msecs_to_jiffies(500);
+ rfkill_wlan.last = last_run;
+ rfkill_bt.last = last_run;
+ rfkill_uwb.last = last_run;
+ rfkill_wimax.last = last_run;
return input_register_handler(&rfkill_handler);
}
printk(KERN_DEBUG "sock_close: NULL inode\n");
return 0;
}
- sock_fasync(-1, filp, 0);
sock_release(SOCKET_I(inode));
return 0;
}
rpcauth_prune_expired(struct list_head *free, int nr_to_scan)
{
spinlock_t *cache_lock;
- struct rpc_cred *cred;
+ struct rpc_cred *cred, *next;
unsigned long expired = jiffies - RPC_AUTH_EXPIRY_MORATORIUM;
- while (!list_empty(&cred_unused)) {
- cred = list_entry(cred_unused.next, struct rpc_cred, cr_lru);
+ list_for_each_entry_safe(cred, next, &cred_unused, cr_lru) {
+
+ /* Enforce a 60 second garbage collection moratorium */
+ if (time_in_range(cred->cr_expire, expired, jiffies) &&
+ test_bit(RPCAUTH_CRED_HASHED, &cred->cr_flags) != 0)
+ continue;
+
list_del_init(&cred->cr_lru);
number_cred_unused--;
if (atomic_read(&cred->cr_count) != 0)
continue;
- /* Enforce a 5 second garbage collection moratorium */
- if (time_in_range(cred->cr_expire, expired, jiffies) &&
- test_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags) != 0)
- continue;
+
cache_lock = &cred->cr_auth->au_credcache->lock;
spin_lock(cache_lock);
if (atomic_read(&cred->cr_count) == 0) {
}
if (test_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags) == 0)
rpcauth_unhash_cred(cred);
- else if (test_bit(RPCAUTH_CRED_HASHED, &cred->cr_flags) != 0) {
+ if (test_bit(RPCAUTH_CRED_HASHED, &cred->cr_flags) != 0) {
cred->cr_expire = jiffies;
list_add_tail(&cred->cr_lru, &cred_unused);
number_cred_unused++;
void (*old_data_ready)(struct sock *, int);
void (*old_state_change)(struct sock *);
void (*old_write_space)(struct sock *);
+ void (*old_error_report)(struct sock *);
};
/*
case -EAGAIN:
xs_nospace(task);
break;
- case -ECONNREFUSED:
case -ECONNRESET:
+ xs_tcp_shutdown(xprt);
+ case -ECONNREFUSED:
case -ENOTCONN:
case -EPIPE:
status = -ENOTCONN;
xprt_release_xprt(xprt, task);
}
+static void xs_save_old_callbacks(struct sock_xprt *transport, struct sock *sk)
+{
+ transport->old_data_ready = sk->sk_data_ready;
+ transport->old_state_change = sk->sk_state_change;
+ transport->old_write_space = sk->sk_write_space;
+ transport->old_error_report = sk->sk_error_report;
+}
+
+static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *sk)
+{
+ sk->sk_data_ready = transport->old_data_ready;
+ sk->sk_state_change = transport->old_state_change;
+ sk->sk_write_space = transport->old_write_space;
+ sk->sk_error_report = transport->old_error_report;
+}
+
/**
* xs_close - close a socket
* @xprt: transport
transport->sock = NULL;
sk->sk_user_data = NULL;
- sk->sk_data_ready = transport->old_data_ready;
- sk->sk_state_change = transport->old_state_change;
- sk->sk_write_space = transport->old_write_space;
+
+ xs_restore_old_callbacks(transport, sk);
write_unlock_bh(&sk->sk_callback_lock);
sk->sk_no_check = 0;
read_unlock(&sk->sk_callback_lock);
}
+/**
+ * xs_tcp_error_report - callback mainly for catching RST events
+ * @sk: socket
+ */
+static void xs_tcp_error_report(struct sock *sk)
+{
+ struct rpc_xprt *xprt;
+
+ read_lock(&sk->sk_callback_lock);
+ if (sk->sk_err != ECONNRESET || sk->sk_state != TCP_ESTABLISHED)
+ goto out;
+ if (!(xprt = xprt_from_sock(sk)))
+ goto out;
+ dprintk("RPC: %s client %p...\n"
+ "RPC: error %d\n",
+ __func__, xprt, sk->sk_err);
+
+ xprt_force_disconnect(xprt);
+out:
+ read_unlock(&sk->sk_callback_lock);
+}
+
/**
* xs_udp_write_space - callback invoked when socket buffer space
* becomes available
write_lock_bh(&sk->sk_callback_lock);
+ xs_save_old_callbacks(transport, sk);
+
sk->sk_user_data = xprt;
- transport->old_data_ready = sk->sk_data_ready;
- transport->old_state_change = sk->sk_state_change;
- transport->old_write_space = sk->sk_write_space;
sk->sk_data_ready = xs_udp_data_ready;
sk->sk_write_space = xs_udp_write_space;
sk->sk_no_check = UDP_CSUM_NORCV;
write_lock_bh(&sk->sk_callback_lock);
+ xs_save_old_callbacks(transport, sk);
+
sk->sk_user_data = xprt;
- transport->old_data_ready = sk->sk_data_ready;
- transport->old_state_change = sk->sk_state_change;
- transport->old_write_space = sk->sk_write_space;
sk->sk_data_ready = xs_tcp_data_ready;
sk->sk_state_change = xs_tcp_state_change;
sk->sk_write_space = xs_tcp_write_space;
+ sk->sk_error_report = xs_tcp_error_report;
sk->sk_allocation = GFP_ATOMIC;
/* socket options */
#endif
error = 0;
out:
- return 0;
+ return error;
}
static void unix_net_exit(struct net *net)
return;
}
- spin_lock(&xfrm_policy_gc_lock);
+ spin_lock_bh(&xfrm_policy_gc_lock);
hlist_add_head(&policy->bydst, &xfrm_policy_gc_list);
- spin_unlock(&xfrm_policy_gc_lock);
+ spin_unlock_bh(&xfrm_policy_gc_lock);
schedule_work(&xfrm_policy_gc_work);
}
-EINVAL : -EAGAIN);
xfrm_state_put(x);
}
+ else if (error == -ESRCH)
+ error = -EAGAIN;
if (!tmpl->optional)
goto fail;
uk.family = k->family;
uk.reserved = k->reserved;
memcpy(&uk.local, &k->local, sizeof(uk.local));
- memcpy(&uk.remote, &k->local, sizeof(uk.remote));
+ memcpy(&uk.remote, &k->remote, sizeof(uk.remote));
return nla_put(skb, XFRMA_KMADDRESS, sizeof(uk), &uk);
}
$(if $(CONFIG_MODULE_SRCVERSION_ALL),-a,) \
$(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \
$(if $(KBUILD_EXTMOD),-I $(modulesymfile)) \
- $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(EXTRA_SYMBOLS))) \
+ $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \
$(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \
$(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S) \
$(if $(CONFIG_MARKERS),-K $(kernelmarkersfile)) \
}
syscall_list() {
-sed -n -e '/^\#define/ { s/[^_]*__NR_\([^[:space:]]*\).*/\
+sed -n -e '/^\#define/ s/[^_]*__NR_\([^[:space:]]*\).*/\
\#if !defined \(__NR_\1\) \&\& !defined \(__IGNORE_\1\)\
\#warning syscall \1 not implemented\
-\#endif/p }' $1
+\#endif/p' $1
}
(ignore_list && syscall_list ${srctree}/arch/x86/include/asm/unistd_32.h) | \
-#!/usr/bin/perl
+#!/usr/bin/perl -w
#
# headers_check.pl execute a number of trivial consistency checks
#
# 2) TODO: check for leaked CONFIG_ symbols
use strict;
-use warnings;
my ($dir, $arch, @files) = @ARGV;
my $filename;
foreach my $file (@files) {
+ local *FH;
$filename = $file;
- open(my $fh, '<', "$filename") or die "$filename: $!\n";
+ open(FH, "<$filename") or die "$filename: $!\n";
$lineno = 0;
- while ($line = <$fh>) {
+ while ($line = <FH>) {
$lineno++;
check_include();
}
- close $fh;
+ close FH;
}
exit $ret;
-#!/usr/bin/perl
+#!/usr/bin/perl -w
#
# headers_install prepare the listed header files for use in
# user space and copy the files to their destination.
# 3) Drop all sections defined out by __KERNEL__ (using unifdef)
use strict;
-use warnings;
my ($readdir, $installdir, $arch, @files) = @ARGV;
my $unifdef = "scripts/unifdef -U__KERNEL__";
foreach my $file (@files) {
+ local *INFILE;
+ local *OUTFILE;
my $tmpfile = "$installdir/$file.tmp";
- open(my $infile, '<', "$readdir/$file")
+ open(INFILE, "<$readdir/$file")
or die "$readdir/$file: $!\n";
- open(my $outfile, '>', "$tmpfile") or die "$tmpfile: $!\n";
- while (my $line = <$infile>) {
+ open(OUTFILE, ">$tmpfile") or die "$tmpfile: $!\n";
+ while (my $line = <INFILE>) {
$line =~ s/([\s(])__user\s/$1/g;
$line =~ s/([\s(])__force\s/$1/g;
$line =~ s/([\s(])__iomem\s/$1/g;
$line =~ s/\s__attribute_const__\s/ /g;
$line =~ s/\s__attribute_const__$//g;
$line =~ s/^#include <linux\/compiler.h>//;
- printf $outfile "%s", $line;
+ printf OUTFILE "%s", $line;
}
- close $outfile;
- close $infile;
+ close OUTFILE;
+ close INFILE;
system $unifdef . " $tmpfile > $installdir/$file";
unlink $tmpfile;
}
release_file(file, len);
return 1;
}
+/* Check whether the file is a static library or not */
+static int is_static_library(const char *objfile)
+{
+ int len = strlen(objfile);
+ if (objfile[len - 2] == '.' && objfile[len - 1] == 'a')
+ return 1;
+ else
+ return 0;
+}
/* We have dir/file.o. Open dir/.file.o.cmd, look for deps_ line to
* figure out source file. */
while ((fname = strsep(&sources, " ")) != NULL) {
if (!*fname)
continue;
- if (!parse_source_files(fname, &md))
+ if (!(is_static_library(fname)) &&
+ !parse_source_files(fname, &md))
goto release;
}
echo "%build"
if ! $PREBUILT; then
-echo "make clean && make %{_smp_mflags}"
+echo "make clean && make %{?_smp_mflags}"
echo ""
fi
echo "%install"
echo "%ifarch ia64"
echo 'mkdir -p $RPM_BUILD_ROOT/boot/efi $RPM_BUILD_ROOT/lib/modules'
+echo 'mkdir -p $RPM_BUILD_ROOT/lib/firmware'
echo "%else"
echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib/modules'
+echo 'mkdir -p $RPM_BUILD_ROOT/lib/firmware'
echo "%endif"
echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
+echo "/lib/firmware"
echo "/boot/*"
echo ""
cd "${1:-.}" || usage
# Check for git and a git repo.
-if head=`git rev-parse --verify HEAD 2>/dev/null`; then
+if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
# Do we have an untagged version?
if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
if tag=`git describe 2>/dev/null`; then
echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+ else
+ printf '%s%s' -g $head
fi
fi
# Are there uncommitted changes?
if [ $changes != 0 ]; then
- printf -- '-svn%s%s%s' "$rev" -dirty "$changes"
+ printf -- '-svn%s%s' "$rev" -dirty
else
printf -- '-svn%s' "$rev"
fi
struct vfs_cap_data vcaps;
struct inode *inode;
- if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID) {
- bprm_clear_caps(bprm);
+ bprm_clear_caps(bprm);
+
+ if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID)
return 0;
- }
dentry = dget(bprm->file->f_dentry);
inode = dentry->d_inode;
int security_vm_enough_memory(long pages)
{
+ WARN_ON(current->mm == NULL);
return security_ops->vm_enough_memory(current->mm, pages);
}
int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
{
+ WARN_ON(mm == NULL);
return security_ops->vm_enough_memory(mm, pages);
}
+int security_vm_enough_memory_kern(long pages)
+{
+ /* If current->mm is a kernel thread then we will pass NULL,
+ for this specific case that is fine */
+ return security_ops->vm_enough_memory(current->mm, pages);
+}
+
int security_bprm_alloc(struct linux_binprm *bprm)
{
return security_ops->bprm_alloc_security(bprm);
tty = get_current_tty();
if (tty) {
file_list_lock();
- file = list_entry(tty->tty_files.next, typeof(*file), f_u.fu_list);
- if (file) {
+ if (!list_empty(&tty->tty_files)) {
+ struct inode *inode;
+
/* Revalidate access to controlling tty.
Use inode_has_perm on the tty inode directly rather
than using file_has_perm, as this particular open
file may belong to another process and we are only
interested in the inode-based check here. */
- struct inode *inode = file->f_path.dentry->d_inode;
+ file = list_first_entry(&tty->tty_files, struct file, f_u.fu_list);
+ inode = file->f_path.dentry->d_inode;
if (inode_has_perm(current, inode,
FILE__READ | FILE__WRITE, NULL)) {
drop_tty = 1;
return -EINVAL;
}
- snprintf(dev->ofdev.dev.bus_id, BUS_ID_SIZE, "soundbus:%x", ++devcount);
+ dev_set_name(&dev->ofdev.dev, "soundbus:%x", ++devcount);
dev->ofdev.dev.bus = &soundbus_bus_type;
return of_device_register(&dev->ofdev);
}
unsigned int idx;
ctl = file->private_data;
- fasync_helper(-1, file, 0, &ctl->fasync);
file->private_data = NULL;
card = ctl->card;
write_lock_irqsave(&card->ctl_files_rwlock, flags);
kctl.id.iface = ncontrol->iface;
kctl.id.device = ncontrol->device;
kctl.id.subdevice = ncontrol->subdevice;
- if (ncontrol->name)
+ if (ncontrol->name) {
strlcpy(kctl.id.name, ncontrol->name, sizeof(kctl.id.name));
+ if (strcmp(ncontrol->name, kctl.id.name) != 0)
+ snd_printk(KERN_WARNING
+ "Control name '%s' truncated to '%s'\n",
+ ncontrol->name, kctl.id.name);
+ }
kctl.id.index = ncontrol->index;
kctl.count = ncontrol->count ? ncontrol->count : 1;
access = ncontrol->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
}
spin_unlock(&shutdown_lock);
- if (likely(df))
+ if (likely(df)) {
+ if ((file->f_flags & FASYNC) && df->disconnected_f_op->fasync)
+ df->disconnected_f_op->fasync(-1, file, 0);
return df->disconnected_f_op->release(inode, file);
+ }
panic("%s(%p, %p) failed!", __func__, inode, file);
}
if (snd_BUG_ON(!substream))
return -ENXIO;
pcm = substream->pcm;
- fasync_helper(-1, file, 0, &substream->runtime->fasync);
mutex_lock(&pcm->open_mutex);
snd_pcm_release_substream(substream);
kfree(pcm_file);
static inline void snd_rawmidi_output_trigger(struct snd_rawmidi_substream *substream,int up)
{
+ if (!substream->opened)
+ return;
if (up) {
tasklet_hi_schedule(&substream->runtime->tasklet);
} else {
static void snd_rawmidi_input_trigger(struct snd_rawmidi_substream *substream, int up)
{
+ if (!substream->opened)
+ return;
substream->ops->trigger(substream, up);
if (!up && substream->runtime->event)
tasklet_kill(&substream->runtime->tasklet);
int result = 0, count1;
struct snd_rawmidi_runtime *runtime = substream->runtime;
+ if (!substream->opened)
+ return -EBADFD;
if (runtime->buffer == NULL) {
snd_printd("snd_rawmidi_receive: input is not active!!!\n");
return -EINVAL;
int snd_rawmidi_transmit(struct snd_rawmidi_substream *substream,
unsigned char *buffer, int count)
{
+ if (!substream->opened)
+ return -EBADFD;
count = snd_rawmidi_transmit_peek(substream, buffer, count);
if (count < 0)
return count;
if (file->private_data) {
tu = file->private_data;
file->private_data = NULL;
- fasync_helper(-1, file, 0, &tu->fasync);
if (tu->timeri)
snd_timer_close(tu->timeri);
kfree(tu->queue);
/* get irq */
irq = platform_get_irq(pfdev, 0);
if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED,
- pfdev->dev.bus_id, (void *)ml403_ac97cr)) {
+ dev_name(&pfdev->dev), (void *)ml403_ac97cr)) {
snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": "
"unable to grab IRQ %d\n",
irq);
ml403_ac97cr->irq);
irq = platform_get_irq(pfdev, 1);
if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED,
- pfdev->dev.bus_id, (void *)ml403_ac97cr)) {
+ dev_name(&pfdev->dev), (void *)ml403_ac97cr)) {
snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": "
"unable to grab IRQ %d\n",
irq);
spin_lock_irqsave(&i8253_lock, flags);
if (count) {
- /* enable counter 2 */
- outb_p(inb_p(0x61) | 3, 0x61);
/* set command for counter 2, 2 byte write */
outb_p(0xB6, 0x43);
/* select desired HZ */
outb_p(count & 0xff, 0x42);
outb((count >> 8) & 0xff, 0x42);
+ /* enable counter 2 */
+ outb_p(inb_p(0x61) | 3, 0x61);
} else {
/* disable counter 2 */
outb(inb_p(0x61) & 0xFC, 0x61);
return 0;
if (port[n] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id);
+ dev_err(dev, "please specify port\n");
return 0;
}
if (irq[n] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "%s: please specify irq\n", dev->bus_id);
+ dev_err(dev, "please specify irq\n");
return 0;
}
if (dma1[n] == SNDRV_AUTO_DMA) {
- snd_printk(KERN_ERR "%s: please specify dma1\n", dev->bus_id);
+ dev_err(dev, "please specify dma1\n");
return 0;
}
return 1;
return 0;
if (port[n] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id);
+ dev_err(dev, "please specify port\n");
return 0;
}
return 1;
card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
if (!card) {
- snd_printk(KERN_ERR "%s: could not create card\n", dev->bus_id);
+ dev_err(dev, "could not create card\n");
return -EINVAL;
}
card->private_data = request_region(port[n], 4, CRD_NAME);
if (!card->private_data) {
- snd_printk(KERN_ERR "%s: could not grab ports\n", dev->bus_id);
+ dev_err(dev, "could not grab ports\n");
error = -EBUSY;
goto out;
}
error = snd_opl3_create(card, port[n], port[n] + 2, OPL3_HW_AUTO, 1, &opl3);
if (error < 0) {
- snd_printk(KERN_ERR "%s: could not create OPL\n", dev->bus_id);
+ dev_err(dev, "could not create OPL\n");
goto out;
}
error = snd_opl3_hwdep_new(opl3, 0, 0, NULL);
if (error < 0) {
- snd_printk(KERN_ERR "%s: could not create FM\n", dev->bus_id);
+ dev_err(dev, "could not create FM\n");
goto out;
}
error = snd_card_register(card);
if (error < 0) {
- snd_printk(KERN_ERR "%s: could not register card\n", dev->bus_id);
+ dev_err(dev, "could not register card\n");
goto out;
}
return 0;
if (port[n] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id);
+ dev_err(dev, "please specify port\n");
return 0;
}
if (irq[n] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "%s: please specify irq\n", dev->bus_id);
+ dev_err(dev, "please specify irq\n");
return 0;
}
if (dma1[n] == SNDRV_AUTO_DMA) {
- snd_printk(KERN_ERR "%s: please specify dma1\n", dev->bus_id);
+ dev_err(dev, "please specify dma1\n");
return 0;
}
return 1;
mpu_port[n], 0, mpu_irq[n],
mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
- printk(KERN_WARNING "%s: MPU401 not detected\n", dev->bus_id);
+ dev_warn(dev, "MPU401 not detected\n");
}
snd_card_set_dev(card, dev);
return 0;
if (port[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "%s: please specify port\n", pdev->bus_id);
+ dev_err(pdev, "please specify port\n");
return 0;
}
if (cport[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "%s: please specify cport\n", pdev->bus_id);
+ dev_err(pdev, "please specify cport\n");
return 0;
}
if (irq[dev] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "%s: please specify irq\n", pdev->bus_id);
+ dev_err(pdev, "please specify irq\n");
return 0;
}
if (dma1[dev] == SNDRV_AUTO_DMA) {
- snd_printk(KERN_ERR "%s: please specify dma1\n", pdev->bus_id);
+ dev_err(pdev, "please specify dma1\n");
return 0;
}
return 1;
if (irq[n] == SNDRV_AUTO_IRQ) {
irq[n] = snd_legacy_find_free_irq(possible_irqs);
if (irq[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free IRQ\n",
- dev->bus_id);
+ dev_err(dev, "unable to find a free IRQ\n");
return -EBUSY;
}
}
if (dma8[n] == SNDRV_AUTO_DMA) {
dma8[n] = snd_legacy_find_free_dma(possible_dmas);
if (dma8[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free DMA\n",
- dev->bus_id);
+ dev_err(dev, "unable to find a free DMA\n");
return -EBUSY;
}
}
if (snd_opl3_create(card, chip->port, chip->port + 2,
OPL3_HW_OPL3, 0, &opl3) < 0)
- printk(KERN_WARNING "%s: opl3 not detected at 0x%lx\n",
- dev->bus_id, chip->port);
+ dev_warn(dev, "opl3 not detected at 0x%lx\n", chip->port);
else {
error = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
if (error < 0)
if (irq[n] == SNDRV_AUTO_IRQ) {
irq[n] = snd_legacy_find_free_irq(possible_irqs);
if (irq[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free IRQ\n",
- dev->bus_id);
+ dev_err(dev, "unable to find a free IRQ\n");
return -EBUSY;
}
}
if (dma1[n] == SNDRV_AUTO_DMA) {
dma1[n] = snd_legacy_find_free_dma(possible_dmas);
if (dma1[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free DMA1\n",
- dev->bus_id);
+ dev_err(dev, "unable to find a free DMA1\n");
return -EBUSY;
}
}
if (dma2[n] == SNDRV_AUTO_DMA) {
dma2[n] = snd_legacy_find_free_dma(possible_dmas);
if (dma2[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free DMA2\n",
- dev->bus_id);
+ dev_err(dev, "unable to find a free DMA2\n");
return -EBUSY;
}
}
error = -ENODEV;
if (gus->max_flag || gus->ess_flag) {
- snd_printk(KERN_ERR "%s: GUS Classic or ACE soundcard was "
- "not detected at 0x%lx\n", dev->bus_id, gus->gf1.port);
+ dev_err(dev, "GUS Classic or ACE soundcard was "
+ "not detected at 0x%lx\n", gus->gf1.port);
goto out;
}
if (irq[n] == SNDRV_AUTO_IRQ) {
irq[n] = snd_legacy_find_free_irq(possible_irqs);
if (irq[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free IRQ "
- "for ES1688\n", dev->bus_id);
+ dev_err(dev, "unable to find a free IRQ for ES1688\n");
return -EBUSY;
}
}
if (dma8[n] == SNDRV_AUTO_DMA) {
dma8[n] = snd_legacy_find_free_dma(possible_dmas);
if (dma8[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free DMA "
- "for ES1688\n", dev->bus_id);
+ dev_err(dev, "unable to find a free DMA for ES1688\n");
return -EBUSY;
}
}
if (gf1_irq[n] == SNDRV_AUTO_IRQ) {
gf1_irq[n] = snd_legacy_find_free_irq(possible_irqs);
if (gf1_irq[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free IRQ "
- "for GF1\n", dev->bus_id);
+ dev_err(dev, "unable to find a free IRQ for GF1\n");
return -EBUSY;
}
}
if (dma1[n] == SNDRV_AUTO_DMA) {
dma1[n] = snd_legacy_find_free_dma(possible_dmas);
if (dma1[n] < 0) {
- snd_printk(KERN_ERR "%s: unable to find a free DMA "
- "for GF1\n", dev->bus_id);
+ dev_err(dev, "unable to find a free DMA for GF1\n");
return -EBUSY;
}
}
error = -ENODEV;
if (!gus->ess_flag) {
- snd_printk(KERN_ERR "%s: GUS Extreme soundcard was not "
- "detected at 0x%lx\n", dev->bus_id, gus->gf1.port);
+ dev_err(dev, "GUS Extreme soundcard was not "
+ "detected at 0x%lx\n", gus->gf1.port);
goto out;
}
gus->codec_flag = 1;
if (snd_opl3_create(card, es1688->port, es1688->port + 2,
OPL3_HW_OPL3, 0, &opl3) < 0)
- printk(KERN_ERR "%s: opl3 not detected at 0x%lx\n",
- dev->bus_id, es1688->port);
+ dev_warn(dev, "opl3 not detected at 0x%lx\n", es1688->port);
else {
error = snd_opl3_hwdep_new(opl3, 0, 2, NULL);
if (error < 0)
if (!enable[dev])
return 0;
if (irq[dev] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "%s: please specify irq\n", pdev->bus_id);
+ dev_err(pdev, "please specify irq\n");
return 0;
}
if (dma8[dev] == SNDRV_AUTO_DMA) {
- snd_printk(KERN_ERR "%s: please specify dma8\n", pdev->bus_id);
+ dev_err(pdev, "please specify dma8\n");
return 0;
}
return 1;
*/
int active;
wait_queue_head_t action_queue, open_queue, sync_queue;
- fmode_t open_mode;
+ int non_blocking;
int busy, syncing, xruns, died;
};
while (uLeft) {
while (write_sq.count >= write_sq.max_active) {
sq_play();
- if (write_sq.open_mode & O_NONBLOCK)
+ if (write_sq.non_blocking)
return uWritten > 0 ? uWritten : -EAGAIN;
SLEEP(write_sq.action_queue);
if (signal_pending(current))
return rc;
}
- sq->open_mode = file->f_mode;
+ sq->non_blocking = file->f_flags & O_NONBLOCK;
}
return rc;
}
ac97->dev.bus = &ac97_bus_type;
ac97->dev.parent = ac97->bus->card->dev;
ac97->dev.release = ac97_device_release;
- snprintf(ac97->dev.bus_id, BUS_ID_SIZE, "%d-%d:%s",
- ac97->bus->card->number, ac97->num,
- snd_ac97_get_short_name(ac97));
+ dev_set_name(&ac97->dev, "%d-%d:%s",
+ ac97->bus->card->number, ac97->num,
+ snd_ac97_get_short_name(ac97));
if ((err = device_register(&ac97->dev)) < 0) {
snd_printk(KERN_ERR "Can't register ac97 bus\n");
ac97->dev.bus = NULL;
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
+ .invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102,
.driver = "Audigy2", .name = "Audigy 2 ZS [SB0350]",
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
+ .invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102,
.driver = "Audigy2", .name = "Audigy 2 ZS [2001]",
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
+ .invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
/* Audigy 2 */
/* Tested by James@superbug.co.uk 3rd July 2005 */
{ 0x14f1, "Conexant" },
{ 0x17e8, "Chrontel" },
{ 0x1854, "LG" },
+ { 0x1aec, "Wolfson Microelectronics" },
{ 0x434d, "C-Media" },
{ 0x8384, "SigmaTel" },
{} /* terminator */
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mutex.h>
+#include <linux/reboot.h>
#include <sound/core.h>
#include <sound/initval.h>
#include "hda_codec.h"
/* for pending irqs */
struct work_struct irq_pending_work;
+
+ /* reboot notifier (for mysterious hangup problem at power-down) */
+ struct notifier_block reboot_notifier;
};
/* driver types */
#endif /* CONFIG_PM */
+/*
+ * reboot notifier for hang-up problem at power-down
+ */
+static int azx_halt(struct notifier_block *nb, unsigned long event, void *buf)
+{
+ struct azx *chip = container_of(nb, struct azx, reboot_notifier);
+ azx_stop_chip(chip);
+ return NOTIFY_OK;
+}
+
+static void azx_notifier_register(struct azx *chip)
+{
+ chip->reboot_notifier.notifier_call = azx_halt;
+ register_reboot_notifier(&chip->reboot_notifier);
+}
+
+static void azx_notifier_unregister(struct azx *chip)
+{
+ if (chip->reboot_notifier.notifier_call)
+ unregister_reboot_notifier(&chip->reboot_notifier);
+}
+
/*
* destructor
*/
{
int i;
+ azx_notifier_unregister(chip);
+
if (chip->initialized) {
azx_clear_irq_pending(chip);
for (i = 0; i < chip->num_streams; i++)
pci_set_drvdata(pci, card);
chip->running = 1;
power_down_all_codecs(chip);
+ azx_notifier_register(chip);
dev++;
return err;
static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE),
+ SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
{}
};
spec->jack_present ? 0 : PIN_OUT);
}
+#if 0 /* it's broken in some acses -- temporarily disabled */
static void alc_mic_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, capsrc_idx_fmic,
HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
}
+#else
+#define alc_mic_automute(codec) /* NOP */
+#endif /* disabled */
/* unsolicited event for HP jack sensing */
static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res)
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC880_HP_EVENT);
+#if 0 /* it's broken in some acses -- temporarily disabled */
if (spec->autocfg.input_pins[AUTO_PIN_MIC] &&
spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC])
snd_hda_codec_write(codec,
spec->autocfg.input_pins[AUTO_PIN_MIC], 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC880_MIC_EVENT);
+#endif /* disabled */
spec->unsol_event = alc_sku_unsol_event;
}
static struct snd_pci_quirk alc883_cfg_tbl[] = {
SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC883_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE),
+ SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE),
return 0;
}
-#define alc269_auto_create_analog_input_ctls \
- alc880_auto_create_analog_input_ctls
+static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ int err;
+
+ err = alc880_auto_create_analog_input_ctls(spec, cfg);
+ if (err < 0)
+ return err;
+ /* digital-mic input pin is excluded in alc880_auto_create..()
+ * because it's under 0x18
+ */
+ if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
+ cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
+ struct hda_input_mux *imux = &spec->private_imux;
+ imux->items[imux->num_items].label = "Int Mic";
+ imux->items[imux->num_items].index = 0x05;
+ imux->num_items++;
+ }
+ return 0;
+}
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc269_loopbacks alc880_loopbacks
enum {
STAC_92HD73XX_REF,
STAC_DELL_M6,
+ STAC_DELL_EQ,
STAC_92HD73XX_MODELS
};
nid = codec->slave_dig_outs[smux_idx - 1];
if (spec->cur_smux[smux_idx] == smux->num_items - 1)
val = AMP_OUT_MUTE;
- if (smux_idx == 0)
- nid = spec->multiout.dig_out_nid;
else
- nid = codec->slave_dig_outs[smux_idx - 1];
+ val = AMP_OUT_UNMUTE;
/* un/mute SPDIF out */
snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE, val);
};
static struct hda_verb dell_m6_core_init[] = {
- /* set master volume to max value without distortion
- * and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
+ { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
/* setup audio connections */
{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
[STAC_DELL_M6] = dell_m6_pin_configs,
+ [STAC_DELL_EQ] = dell_m6_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = "ref",
[STAC_DELL_M6] = "dell-m6",
+ [STAC_DELL_EQ] = "dell-eq",
};
static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
sizeof(stac92hd73xx_dmux));
switch (spec->board_config) {
- case STAC_DELL_M6:
+ case STAC_DELL_EQ:
spec->init = dell_eq_core_init;
+ /* fallthru */
+ case STAC_DELL_M6:
spec->num_smuxes = 0;
spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
spec->num_amps = 1;
+
+ if (!spec->init)
+ spec->init = dell_m6_core_init;
switch (codec->subsystem_id) {
case 0x1028025e: /* Analog Mics */
case 0x1028025f:
break;
case 0x10280271: /* Digital Mics */
case 0x10280272:
- spec->init = dell_m6_core_init;
- /* fall-through */
case 0x10280254:
case 0x10280255:
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
return err;
}
- if (ice_has_con_ac97(ice))
+ if (ice_has_con_ac97(ice)) {
err = snd_ice1712_pcm(ice, pcm_dev++, NULL);
if (err < 0) {
snd_card_free(card);
return err;
}
+ }
err = snd_ice1712_ac97_mixer(ice);
if (err < 0) {
}
}
- if (ice_has_con_ac97(ice))
+ if (ice_has_con_ac97(ice)) {
err = snd_ice1712_pcm_ds(ice, pcm_dev++, NULL);
if (err < 0) {
snd_card_free(card);
return err;
}
+ }
if (!c->no_mpu401) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
SND_PCI_QUIRK(0x0e11, 0x008a, "AD1885", 41000),
SND_PCI_QUIRK(0x1028, 0x00be, "AD1885", 44100),
SND_PCI_QUIRK(0x1028, 0x0177, "AD1980", 48000),
+ SND_PCI_QUIRK(0x1028, 0x01ad, "AD1981B", 48000),
SND_PCI_QUIRK(0x1043, 0x80f3, "AD1985", 48000),
{ } /* terminator */
};
SOC_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0),
SOC_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0),
-SOC_SINGLE("ALC Decay Time ", AC97_CODEC_CLASS_REV, 4, 15, 0),
+SOC_SINGLE("ALC Decay Time", AC97_CODEC_CLASS_REV, 4, 15, 0),
SOC_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0),
SOC_ENUM("ALC Function", wm9713_enum[6]),
SOC_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 0),
struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
u16 imr;
u8 psc_cmd;
- long flags;
+ unsigned long flags;
if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
s = &psc_i2s->capture;
return count;
}
-DEVICE_ATTR(status, 0644, psc_i2s_status_show, NULL);
-DEVICE_ATTR(playback_underrun, 0644, psc_i2s_stat_show, psc_i2s_stat_store);
-DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show, psc_i2s_stat_store);
+static DEVICE_ATTR(status, 0644, psc_i2s_status_show, NULL);
+static DEVICE_ATTR(playback_underrun, 0644, psc_i2s_stat_show,
+ psc_i2s_stat_store);
+static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show,
+ psc_i2s_stat_store);
/* ---------------------------------------------------------------------
* OF platform bus binding code:
/* Register the SYSFS files */
rc = device_create_file(psc_i2s->dev, &dev_attr_status);
- rc = device_create_file(psc_i2s->dev, &dev_attr_capture_overrun);
- rc = device_create_file(psc_i2s->dev, &dev_attr_playback_underrun);
+ rc |= device_create_file(psc_i2s->dev, &dev_attr_capture_overrun);
+ rc |= device_create_file(psc_i2s->dev, &dev_attr_playback_underrun);
if (rc)
dev_info(psc_i2s->dev, "error creating sysfs files\n");
codec->ac97->dev.parent = NULL;
codec->ac97->dev.release = soc_ac97_device_release;
- snprintf(codec->ac97->dev.bus_id, BUS_ID_SIZE, "%d-%d:%s",
- codec->card->number, 0, codec->name);
+ dev_set_name(&codec->ac97->dev, "%d-%d:%s",
+ codec->card->number, 0, codec->name);
err = device_register(&codec->ac97->dev);
if (err < 0) {
snd_printk(KERN_ERR "Can't register ac97 bus\n");
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
int max = mc->max;
- unsigned int shift = mc->min;
+ unsigned int shift = mc->shift;
unsigned int rshift = mc->rshift;
if (max == 1)
dbri->dma = dma_alloc_coherent(&op->dev,
sizeof(struct dbri_dma),
&dbri->dma_dvma, GFP_ATOMIC);
+ if (!dbri->dma)
+ return -ENOMEM;
memset((void *)dbri->dma, 0, sizeof(struct dbri_dma));
dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n",
}
}
},
+{
+ /* Advanced modes of the Edirol UA-25EX.
+ * For the standard mode, UA-25EX has ID 0582:00e7, which
+ * offers only 16-bit PCM at 44.1 kHz and no MIDI.
+ */
+ USB_DEVICE_VENDOR_SPEC(0x0582, 0x00e6),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "EDIROL",
+ .product_name = "UA-25EX",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_EDIROL_UAXX
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_EDIROL_UAXX
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_EDIROL_UAXX
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Guillemot devices */
{
git.openpandora.org / pandora-kernel.git / commitdiff