wireless: Remove unnecessary ; from while (0) macros

Semicolons are not necessary after macros that end in while (0).
Remove them.

Simplify the macros with tests of
do { if (foo>size) memset1; else memset2;} while (0);
to a single line memset(,,min_t(size_t, foo, size))

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/carl9170/cmd.h b/drivers/net/wireless/ath/carl9170/cmd.h
index 885c427..65919c9 100644 (file)
--- a/drivers/net/wireless/ath/carl9170/cmd.h
+++ b/drivers/net/wireless/ath/carl9170/cmd.h
@@ -114,7 +114,7 @@ __regwrite_out :                                                    \
 
 #define carl9170_regwrite_result()                                     \
        __err;                                                          \
-} while (0);
+} while (0)
 
 
 #define carl9170_async_regwrite_get_buf()                              \
@@ -126,7 +126,7 @@ do {                                                                        \
                __err = -ENOMEM;                                        \
                goto __async_regwrite_out;                              \
        }                                                               \
-} while (0);
+} while (0)
 
 #define carl9170_async_regwrite_begin(carl)                            \
 do {                                                                   \
@@ -169,6 +169,6 @@ __async_regwrite_out:                                                       \
 
 #define carl9170_async_regwrite_result()                               \
        __err;                                                          \
-} while (0);
+} while (0)
 
 #endif /* __CMD_H */

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/d11.h b/drivers/net/wireless/brcm80211/brcmsmac/d11.h
index 1948cb2..3f659e0 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmsmac/d11.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/d11.h
@@ -733,7 +733,7 @@ struct cck_phy_hdr {
        do { \
                plcp[1] = len & 0xff; \
                plcp[2] = ((len >> 8) & 0xff); \
-       } while (0);
+       } while (0)
 
 #define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
 #define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU)

diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index a3fb322..0ead152 100644 (file)
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -193,7 +193,7 @@
                a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \
                                                a->mp_end_port)));      \
        a->mpa_tx.pkt_cnt++;                                            \
-} while (0);
+} while (0)
 
 /* SDIO Tx aggregation limit ? */
 #define MP_TX_AGGR_PKT_LIMIT_REACHED(a)                                        \
@@ -211,7 +211,7 @@
        a->mpa_tx.buf_len = 0;                                          \
        a->mpa_tx.ports = 0;                                            \
        a->mpa_tx.start_port = 0;                                       \
-} while (0);
+} while (0)
 
 /* SDIO Rx aggregation limit ? */
 #define MP_RX_AGGR_PKT_LIMIT_REACHED(a)                                        \
@@ -242,7 +242,7 @@
        a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb;                     \
        a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len;                \
        a->mpa_rx.pkt_cnt++;                                            \
-} while (0);
+} while (0)
 
 /* Reset SDIO Rx aggregation buffer parameters */
 #define MP_RX_AGGR_BUF_RESET(a) do {                                   \
@@ -250,7 +250,7 @@
        a->mpa_rx.buf_len = 0;                                          \
        a->mpa_rx.ports = 0;                                            \
        a->mpa_rx.start_port = 0;                                       \
-} while (0);
+} while (0)
 
 
 /* data structure for SDIO MPA TX */

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
index efb9ab2..c4adb97 100644 (file)
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
@@ -530,12 +530,7 @@
        SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
 
 #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)      \
-do {                                                   \
-       if (_size > TX_DESC_NEXT_DESC_OFFSET)           \
-               memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);   \
-       else                                            \
-               memset(__pdesc, 0, _size);      \
-} while (0);
+       memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
 
 struct rx_fwinfo_92c {
        u8 gain_trsw[4];

diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
index 0dc736c..057a524 100644 (file)
--- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
@@ -530,12 +530,8 @@
        SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
 
 #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)      \
-do {                                                   \
-       if (_size > TX_DESC_NEXT_DESC_OFFSET)           \
-               memset((void *)__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);   \
-       else                                            \
-               memset((void *)__pdesc, 0, _size);      \
-} while (0);
+       memset((void *)__pdesc, 0,                      \
+              min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
 
 /* For 92D early mode */
 #define SET_EARLYMODE_PKTNUM(__paddr, __value)         \

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/def.h b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
index d1b0a1e..20afec6 100644 (file)
--- a/drivers/net/wireless/rtlwifi/rtl8192se/def.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
@@ -252,12 +252,7 @@
  * the desc is cleared. */
 #define        TX_DESC_NEXT_DESC_OFFSET                        36
 #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)              \
-do {                                                           \
-       if (_size > TX_DESC_NEXT_DESC_OFFSET)                   \
-               memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);   \
-       else                                                    \
-               memset(__pdesc, 0, _size);                      \
-} while (0);
+       memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
 
 /* Rx Desc */
 #define RX_STATUS_DESC_SIZE                            24

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
index b4afff6..d53f433 100644 (file)
--- a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
@@ -345,7 +345,7 @@ enum fw_h2c_cmd {
        do {                                                    \
                udelay(1000);                                   \
                rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit);         \
-       } while (0);
+       } while (0)
 
 #define FW_CMD_IO_UPDATE(rtlpriv, _val)                                \
        rtlpriv->rtlhal.fwcmd_iomap = _val;
@@ -354,13 +354,13 @@ enum fw_h2c_cmd {
        do {                                                    \
                rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val);      \
                FW_CMD_IO_UPDATE(rtlpriv, _val);                \
-       } while (0);
+       } while (0)
 
 #define FW_CMD_PARA_SET(rtlpriv, _val)                         \
        do {                                                    \
                rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val); \
                rtlpriv->rtlhal.fwcmd_ioparam = _val;           \
-       } while (0);
+       } while (0)
 
 #define FW_CMD_IO_QUERY(rtlpriv)                               \
        (u16)(rtlpriv->rtlhal.fwcmd_iomap)