#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <linux/mmc/protocol.h>
-#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
#include <asm/system.h>
#include <asm/uaccess.h>
endif
obj-$(CONFIG_MMC) += mmc_core.o
-mmc_core-y := core.o sysfs.o
+mmc_core-y := core.o sysfs.o mmc_ops.o sd_ops.o
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <linux/mmc/protocol.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
#include "core.h"
+#include "sysfs.h"
+
+#include "mmc_ops.h"
+#include "sd_ops.h"
#define CMD_RETRIES 3
EXPORT_SYMBOL(mmc_wait_for_cmd);
-/**
- * mmc_wait_for_app_cmd - start an application command and wait for
- completion
- * @host: MMC host to start command
- * @rca: RCA to send MMC_APP_CMD to
- * @cmd: MMC command to start
- * @retries: maximum number of retries
- *
- * Sends a MMC_APP_CMD, checks the card response, sends the command
- * in the parameter and waits for it to complete. Return any error
- * that occurred while the command was executing. Do not attempt to
- * parse the response.
- */
-int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
- struct mmc_command *cmd, int retries)
-{
- struct mmc_request mrq;
- struct mmc_command appcmd;
-
- int i, err;
-
- BUG_ON(!host->claimed);
- BUG_ON(retries < 0);
-
- err = MMC_ERR_INVALID;
-
- /*
- * We have to resend MMC_APP_CMD for each attempt so
- * we cannot use the retries field in mmc_command.
- */
- for (i = 0;i <= retries;i++) {
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- appcmd.opcode = MMC_APP_CMD;
- appcmd.arg = rca << 16;
- appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
- appcmd.retries = 0;
- memset(appcmd.resp, 0, sizeof(appcmd.resp));
- appcmd.data = NULL;
-
- mrq.cmd = &appcmd;
- appcmd.data = NULL;
-
- mmc_wait_for_req(host, &mrq);
-
- if (appcmd.error) {
- err = appcmd.error;
- continue;
- }
-
- /* Check that card supported application commands */
- if (!(appcmd.resp[0] & R1_APP_CMD))
- return MMC_ERR_FAILED;
-
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- memset(cmd->resp, 0, sizeof(cmd->resp));
- cmd->retries = 0;
-
- mrq.cmd = cmd;
- cmd->data = NULL;
-
- mmc_wait_for_req(host, &mrq);
-
- err = cmd->error;
- if (cmd->error == MMC_ERR_NONE)
- break;
- }
-
- return err;
-}
-
-EXPORT_SYMBOL(mmc_wait_for_app_cmd);
-
/**
* mmc_set_data_timeout - set the timeout for a data command
* @data: data phase for command
host->ops->set_ios(host, ios);
}
-static int mmc_select_card(struct mmc_card *card)
-{
- int err;
- struct mmc_command cmd;
-
- BUG_ON(!card->host->claimed);
-
- cmd.opcode = MMC_SELECT_CARD;
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(card->host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE)
- return err;
-
- /*
- * We can only change the bus width of SD cards when
- * they are selected so we have to put the handling
- * here.
- *
- * The card is in 1 bit mode by default so
- * we only need to change if it supports the
- * wider version.
- */
- if (mmc_card_sd(card) &&
- (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) &&
- (card->host->caps & MMC_CAP_4_BIT_DATA)) {
-
- struct mmc_command cmd;
- cmd.opcode = SD_APP_SET_BUS_WIDTH;
- cmd.arg = SD_BUS_WIDTH_4;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-
- err = mmc_wait_for_app_cmd(card->host, card->rca,
- &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE)
- return err;
-
- card->host->ios.bus_width = MMC_BUS_WIDTH_4;
- mmc_set_ios(card->host);
- }
-
- return MMC_ERR_NONE;
-}
-
-
-static inline void mmc_delay(unsigned int ms)
+void mmc_set_chip_select(struct mmc_host *host, int mode)
{
- if (ms < 1000 / HZ) {
- cond_resched();
- mdelay(ms);
- } else {
- msleep(ms);
- }
+ host->ios.chip_select = mode;
+ mmc_set_ios(host);
}
/*
return card;
}
-/*
- * Tell attached cards to go to IDLE state
- */
-static void mmc_idle_cards(struct mmc_host *host)
-{
- struct mmc_command cmd;
-
- host->ios.chip_select = MMC_CS_HIGH;
- mmc_set_ios(host);
-
- mmc_delay(1);
-
- cmd.opcode = MMC_GO_IDLE_STATE;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
-
- mmc_wait_for_cmd(host, &cmd, 0);
-
- mmc_delay(1);
-
- host->ios.chip_select = MMC_CS_DONTCARE;
- mmc_set_ios(host);
-
- mmc_delay(1);
-}
-
/*
* Apply power to the MMC stack. This is a two-stage process.
* First, we enable power to the card without the clock running.
mmc_set_ios(host);
}
-static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
-{
- struct mmc_command cmd;
- int i, err = 0;
-
- cmd.opcode = MMC_SEND_OP_COND;
- cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
-
- for (i = 100; i; i--) {
- err = mmc_wait_for_cmd(host, &cmd, 0);
- if (err != MMC_ERR_NONE)
- break;
-
- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
- break;
-
- err = MMC_ERR_TIMEOUT;
-
- mmc_delay(10);
- }
-
- if (rocr)
- *rocr = cmd.resp[0];
-
- return err;
-}
-
-static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
-{
- struct mmc_command cmd;
- int i, err = 0;
-
- cmd.opcode = SD_APP_OP_COND;
- cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
-
- for (i = 100; i; i--) {
- err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE)
- break;
-
- if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
- break;
-
- err = MMC_ERR_TIMEOUT;
-
- mmc_delay(10);
- }
-
- if (rocr)
- *rocr = cmd.resp[0];
-
- return err;
-}
-
-static int mmc_send_if_cond(struct mmc_host *host, u32 ocr, int *rsd2)
-{
- struct mmc_command cmd;
- int err, sd2;
- static const u8 test_pattern = 0xAA;
-
- /*
- * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
- * before SD_APP_OP_COND. This command will harmlessly fail for
- * SD 1.0 cards.
- */
- cmd.opcode = SD_SEND_IF_COND;
- cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
- cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
-
- err = mmc_wait_for_cmd(host, &cmd, 0);
- if (err == MMC_ERR_NONE) {
- if ((cmd.resp[0] & 0xFF) == test_pattern) {
- sd2 = 1;
- } else {
- sd2 = 0;
- err = MMC_ERR_FAILED;
- }
- } else {
- /*
- * Treat errors as SD 1.0 card.
- */
- sd2 = 0;
- err = MMC_ERR_NONE;
- }
- if (rsd2)
- *rsd2 = sd2;
- return err;
-}
-
/*
* Discover the card by requesting its CID.
*
static void mmc_discover_card(struct mmc_host *host)
{
unsigned int err;
-
- struct mmc_command cmd;
+ u32 cid[4];
BUG_ON(host->card);
- cmd.opcode = MMC_ALL_SEND_CID;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
-
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err == MMC_ERR_TIMEOUT) {
- err = MMC_ERR_NONE;
- return;
- }
+ err = mmc_all_send_cid(host, cid);
if (err != MMC_ERR_NONE) {
printk(KERN_ERR "%s: error requesting CID: %d\n",
mmc_hostname(host), err);
return;
}
- host->card = mmc_alloc_card(host, cmd.resp);
+ host->card = mmc_alloc_card(host, cid);
if (IS_ERR(host->card)) {
err = PTR_ERR(host->card);
host->card = NULL;
if (host->mode == MMC_MODE_SD) {
host->card->type = MMC_TYPE_SD;
- cmd.opcode = SD_SEND_RELATIVE_ADDR;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
-
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ err = mmc_send_relative_addr(host, &host->card->rca);
if (err != MMC_ERR_NONE)
mmc_card_set_dead(host->card);
else {
- host->card->rca = cmd.resp[0] >> 16;
-
if (!host->ops->get_ro) {
printk(KERN_WARNING "%s: host does not "
"support reading read-only "
host->card->type = MMC_TYPE_MMC;
host->card->rca = 1;
- cmd.opcode = MMC_SET_RELATIVE_ADDR;
- cmd.arg = host->card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ err = mmc_set_relative_addr(host->card);
if (err != MMC_ERR_NONE)
mmc_card_set_dead(host->card);
}
static void mmc_read_csd(struct mmc_host *host)
{
- struct mmc_command cmd;
int err;
if (!host->card)
if (mmc_card_dead(host->card))
return;
- cmd.opcode = MMC_SEND_CSD;
- cmd.arg = host->card->rca << 16;
- cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ err = mmc_send_csd(host->card, host->card->raw_csd);
if (err != MMC_ERR_NONE) {
mmc_card_set_dead(host->card);
return;
}
- memcpy(host->card->raw_csd, cmd.resp, sizeof(host->card->raw_csd));
-
mmc_decode_csd(host->card);
mmc_decode_cid(host->card);
}
static void mmc_process_ext_csd(struct mmc_host *host)
{
int err;
-
- struct mmc_request mrq;
- struct mmc_command cmd;
- struct mmc_data data;
-
u8 *ext_csd;
- struct scatterlist sg;
if (!host->card)
return;
return;
}
- memset(&cmd, 0, sizeof(struct mmc_command));
-
- cmd.opcode = MMC_SEND_EXT_CSD;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- memset(&data, 0, sizeof(struct mmc_data));
-
- mmc_set_data_timeout(&data, host->card, 0);
-
- data.blksz = 512;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
-
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- mrq.cmd = &cmd;
- mrq.data = &data;
-
- sg_init_one(&sg, ext_csd, 512);
-
- mmc_wait_for_req(host, &mrq);
-
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
+ err = mmc_send_ext_csd(host->card, ext_csd);
+ if (err != MMC_ERR_NONE) {
if (host->card->csd.capacity == (4096 * 512)) {
printk(KERN_ERR "%s: unable to read EXT_CSD "
"on a possible high capacity card. "
if (host->caps & MMC_CAP_MMC_HIGHSPEED) {
/* Activate highspeed support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_HS_TIMING << 16) |
- (1 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ err = mmc_switch(host->card, MMC_SWITCH_MODE_WRITE_BYTE,
+ EXT_CSD_HS_TIMING, 1);
if (err != MMC_ERR_NONE) {
printk("%s: failed to switch card to mmc v4 "
"high-speed mode.\n",
/* Check for host support for wide-bus modes. */
if (host->caps & MMC_CAP_4_BIT_DATA) {
/* Activate 4-bit support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BUS_WIDTH << 16) |
- (EXT_CSD_BUS_WIDTH_4 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ err = mmc_switch(host->card, MMC_SWITCH_MODE_WRITE_BYTE,
+ EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_4 |
+ EXT_CSD_CMD_SET_NORMAL);
if (err != MMC_ERR_NONE) {
printk("%s: failed to switch card to "
"mmc v4 4-bit bus mode.\n",
static void mmc_read_scr(struct mmc_host *host)
{
int err;
- struct mmc_request mrq;
- struct mmc_command cmd;
- struct mmc_data data;
- struct scatterlist sg;
if (!host->card)
return;
if (!mmc_card_sd(host->card))
return;
- memset(&cmd, 0, sizeof(struct mmc_command));
-
- cmd.opcode = MMC_APP_CMD;
- cmd.arg = host->card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(host, &cmd, 0);
- if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) {
- mmc_card_set_dead(host->card);
- return;
- }
-
- memset(&cmd, 0, sizeof(struct mmc_command));
-
- cmd.opcode = SD_APP_SEND_SCR;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- memset(&data, 0, sizeof(struct mmc_data));
-
- mmc_set_data_timeout(&data, host->card, 0);
-
- data.blksz = 1 << 3;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
-
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- mrq.cmd = &cmd;
- mrq.data = &data;
-
- sg_init_one(&sg, (u8*)host->card->raw_scr, 8);
-
- mmc_wait_for_req(host, &mrq);
-
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
+ err = mmc_app_send_scr(host->card, host->card->raw_scr);
+ if (err != MMC_ERR_NONE) {
mmc_card_set_dead(host->card);
return;
}
- host->card->raw_scr[0] = ntohl(host->card->raw_scr[0]);
- host->card->raw_scr[1] = ntohl(host->card->raw_scr[1]);
-
mmc_decode_scr(host->card);
}
static void mmc_read_switch_caps(struct mmc_host *host)
{
- struct mmc_request mrq;
- struct mmc_command cmd;
- struct mmc_data data;
+ int err;
unsigned char *status;
- struct scatterlist sg;
if (!(host->caps & MMC_CAP_SD_HIGHSPEED))
return;
return;
}
- memset(&cmd, 0, sizeof(struct mmc_command));
-
- cmd.opcode = SD_SWITCH;
- cmd.arg = 0x00FFFFF1;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- memset(&data, 0, sizeof(struct mmc_data));
-
- mmc_set_data_timeout(&data, host->card, 0);
-
- data.blksz = 64;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
-
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- mrq.cmd = &cmd;
- mrq.data = &data;
-
- sg_init_one(&sg, status, 64);
-
- mmc_wait_for_req(host, &mrq);
-
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
+ err = mmc_sd_switch(host->card, SD_SWITCH_CHECK,
+ SD_SWITCH_GRP_ACCESS, SD_SWITCH_ACCESS_HS, status);
+ if (err != MMC_ERR_NONE) {
printk("%s: unable to read switch capabilities, "
"performance might suffer.\n",
mmc_hostname(host));
if (status[13] & 0x02)
host->card->sw_caps.hs_max_dtr = 50000000;
- memset(&cmd, 0, sizeof(struct mmc_command));
-
- cmd.opcode = SD_SWITCH;
- cmd.arg = 0x80FFFFF1;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- memset(&data, 0, sizeof(struct mmc_data));
-
- mmc_set_data_timeout(&data, host->card, 0);
-
- data.blksz = 64;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
-
- memset(&mrq, 0, sizeof(struct mmc_request));
-
- mrq.cmd = &cmd;
- mrq.data = &data;
-
- sg_init_one(&sg, status, 64);
-
- mmc_wait_for_req(host, &mrq);
-
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE ||
- (status[16] & 0xF) != 1) {
+ err = mmc_sd_switch(host->card, SD_SWITCH_SET,
+ SD_SWITCH_GRP_ACCESS, SD_SWITCH_ACCESS_HS, status);
+ if (err != MMC_ERR_NONE || (status[16] & 0xF) != 1) {
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(host));
*/
static void mmc_check_card(struct mmc_card *card)
{
- struct mmc_command cmd;
int err;
BUG_ON(!card);
- cmd.opcode = MMC_SEND_STATUS;
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-
- err = mmc_wait_for_cmd(card->host, &cmd, CMD_RETRIES);
+ err = mmc_send_status(card, NULL);
if (err == MMC_ERR_NONE)
return;
host->mode = MMC_MODE_SD;
mmc_power_up(host);
- mmc_idle_cards(host);
+ mmc_go_idle(host);
- err = mmc_send_if_cond(host, host->ocr_avail, NULL);
+ err = mmc_send_if_cond(host, host->ocr_avail);
if (err != MMC_ERR_NONE) {
return;
}
* state. We wait 1ms to give cards time to
* respond.
*/
- mmc_idle_cards(host);
+ mmc_go_idle(host);
/*
* Send the selected OCR multiple times... until the cards
* (My SanDisk card seems to need this.)
*/
if (host->mode == MMC_MODE_SD) {
- int err, sd2;
- err = mmc_send_if_cond(host, host->ocr, &sd2);
- if (err == MMC_ERR_NONE) {
- /*
- * If SD_SEND_IF_COND indicates an SD 2.0
- * compliant card and we should set bit 30
- * of the ocr to indicate that we can handle
- * block-addressed SDHC cards.
- */
- mmc_send_app_op_cond(host, host->ocr | (sd2 << 30), NULL);
- }
+ /*
+ * If SD_SEND_IF_COND indicates an SD 2.0
+ * compliant card and we should set bit 30
+ * of the ocr to indicate that we can handle
+ * block-addressed SDHC cards.
+ */
+ err = mmc_send_if_cond(host, host->ocr);
+ if (err == MMC_ERR_NONE)
+ ocr = host->ocr | (1 << 30);
+
+ mmc_send_app_op_cond(host, ocr, NULL);
} else {
/* The extra bit indicates that we support high capacity */
mmc_send_op_cond(host, host->ocr | (1 << 30), NULL);
mmc_card_set_dead(host->card);
}
+ /*
+ * The card is in 1 bit mode by default so
+ * we only need to change if it supports the
+ * wider version.
+ */
+ if (host->card && !mmc_card_dead(host->card) &&
+ mmc_card_sd(host->card) &&
+ (host->card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) &&
+ (host->card->host->caps & MMC_CAP_4_BIT_DATA)) {
+ err = mmc_app_set_bus_width(host->card, SD_BUS_WIDTH_4);
+ if (err != MMC_ERR_NONE)
+ mmc_card_set_dead(host->card);
+ else {
+ host->ios.bus_width = MMC_BUS_WIDTH_4;
+ mmc_set_ios(host);
+ }
+ }
+
if (host->mode == MMC_MODE_SD) {
mmc_read_scr(host);
mmc_read_switch_caps(host);
* linux/drivers/mmc/core/core.h
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
+ * Copyright 2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef _MMC_CORE_H
-#define _MMC_CORE_H
-/* core-internal functions */
-void mmc_init_card(struct mmc_card *card, struct mmc_host *host);
-int mmc_register_card(struct mmc_card *card);
-void mmc_remove_card(struct mmc_card *card);
+#ifndef _MMC_CORE_CORE_H
+#define _MMC_CORE_CORE_H
-struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev);
-int mmc_add_host_sysfs(struct mmc_host *host);
-void mmc_remove_host_sysfs(struct mmc_host *host);
-void mmc_free_host_sysfs(struct mmc_host *host);
+#include <linux/delay.h>
+
+#define MMC_CMD_RETRIES 3
+
+void mmc_set_chip_select(struct mmc_host *host, int mode);
+
+static inline void mmc_delay(unsigned int ms)
+{
+ if (ms < 1000 / HZ) {
+ cond_resched();
+ mdelay(ms);
+ } else {
+ msleep(ms);
+ }
+}
-int mmc_schedule_work(struct work_struct *work);
-int mmc_schedule_delayed_work(struct delayed_work *work, unsigned long delay);
-void mmc_flush_scheduled_work(void);
#endif
+
--- /dev/null
+/*
+ * linux/drivers/mmc/mmc_ops.h
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+
+#include "core.h"
+#include "mmc_ops.h"
+
+static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SELECT_CARD;
+
+ if (card) {
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ } else {
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_select_card(struct mmc_card *card)
+{
+ BUG_ON(!card);
+
+ return _mmc_select_card(card->host, card);
+}
+
+int mmc_deselect_cards(struct mmc_host *host)
+{
+ return _mmc_select_card(host, NULL);
+}
+
+int mmc_go_idle(struct mmc_host *host)
+{
+ int err;
+ struct mmc_command cmd;
+
+ mmc_set_chip_select(host, MMC_CS_HIGH);
+
+ mmc_delay(1);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_GO_IDLE_STATE;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+
+ mmc_delay(1);
+
+ mmc_set_chip_select(host, MMC_CS_DONTCARE);
+
+ mmc_delay(1);
+
+ return err;
+}
+
+int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+ struct mmc_command cmd;
+ int i, err = 0;
+
+ BUG_ON(!host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_OP_COND;
+ cmd.arg = ocr;
+ cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
+
+ for (i = 100; i; i--) {
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (err != MMC_ERR_NONE)
+ break;
+
+ if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+ break;
+
+ err = MMC_ERR_TIMEOUT;
+
+ mmc_delay(10);
+ }
+
+ if (rocr)
+ *rocr = cmd.resp[0];
+
+ return err;
+}
+
+int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!host);
+ BUG_ON(!cid);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_ALL_SEND_CID;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ memcpy(cid, cmd.resp, sizeof(u32) * 4);
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_set_relative_addr(struct mmc_card *card)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SET_RELATIVE_ADDR;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_send_csd(struct mmc_card *card, u32 *csd)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+ BUG_ON(!csd);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_CSD;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ memcpy(csd, cmd.resp, sizeof(u32) * 4);
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+{
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+ BUG_ON(!ext_csd);
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = MMC_SEND_EXT_CSD;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 512;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, ext_csd, 512);
+
+ mmc_set_data_timeout(&data, card, 0);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error != MMC_ERR_NONE)
+ return cmd.error;
+ if (data.error != MMC_ERR_NONE)
+ return data.error;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (index << 16) |
+ (value << 8) |
+ set;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_send_status(struct mmc_card *card, u32 *status)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ if (status)
+ *status = cmd.resp[0];
+
+ return MMC_ERR_NONE;
+}
+
--- /dev/null
+/*
+ * linux/drivers/mmc/mmc_ops.h
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_MMC_OPS_H
+#define _MMC_MMC_OPS_H
+
+int mmc_select_card(struct mmc_card *card);
+int mmc_deselect_cards(struct mmc_host *host);
+int mmc_go_idle(struct mmc_host *host);
+int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
+int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
+int mmc_set_relative_addr(struct mmc_card *card);
+int mmc_send_csd(struct mmc_card *card, u32 *csd);
+int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
+int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value);
+int mmc_send_status(struct mmc_card *card, u32 *status);
+
+#endif
+
--- /dev/null
+/*
+ * linux/drivers/mmc/sd_ops.h
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#include "core.h"
+#include "sd_ops.h"
+
+/**
+ * mmc_wait_for_app_cmd - start an application command and wait for
+ completion
+ * @host: MMC host to start command
+ * @rca: RCA to send MMC_APP_CMD to
+ * @cmd: MMC command to start
+ * @retries: maximum number of retries
+ *
+ * Sends a MMC_APP_CMD, checks the card response, sends the command
+ * in the parameter and waits for it to complete. Return any error
+ * that occurred while the command was executing. Do not attempt to
+ * parse the response.
+ */
+int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
+ struct mmc_command *cmd, int retries)
+{
+ struct mmc_request mrq;
+
+ int i, err;
+
+ BUG_ON(!cmd);
+ BUG_ON(retries < 0);
+
+ err = MMC_ERR_INVALID;
+
+ /*
+ * We have to resend MMC_APP_CMD for each attempt so
+ * we cannot use the retries field in mmc_command.
+ */
+ for (i = 0;i <= retries;i++) {
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+ err = mmc_app_cmd(host, card);
+ if (err != MMC_ERR_NONE)
+ continue;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+ memset(cmd->resp, 0, sizeof(cmd->resp));
+ cmd->retries = 0;
+
+ mrq.cmd = cmd;
+ cmd->data = NULL;
+
+ mmc_wait_for_req(host, &mrq);
+
+ err = cmd->error;
+ if (cmd->error == MMC_ERR_NONE)
+ break;
+ }
+
+ return err;
+}
+
+EXPORT_SYMBOL(mmc_wait_for_app_cmd);
+
+int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!host);
+ BUG_ON(card && (card->host != host));
+
+ cmd.opcode = MMC_APP_CMD;
+
+ if (card) {
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ } else {
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_BCR;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ /* Check that card supported application commands */
+ if (!(cmd.resp[0] & R1_APP_CMD))
+ return MMC_ERR_FAILED;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_app_set_bus_width(struct mmc_card *card, int width)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_APP_SET_BUS_WIDTH;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ switch (width) {
+ case MMC_BUS_WIDTH_1:
+ cmd.arg = SD_BUS_WIDTH_1;
+ break;
+ case MMC_BUS_WIDTH_4:
+ cmd.arg = SD_BUS_WIDTH_4;
+ break;
+ default:
+ return MMC_ERR_INVALID;
+ }
+
+ err = mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+ struct mmc_command cmd;
+ int i, err = 0;
+
+ BUG_ON(!host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_APP_OP_COND;
+ cmd.arg = ocr;
+ cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
+
+ for (i = 100; i; i--) {
+ err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ break;
+
+ if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+ break;
+
+ err = MMC_ERR_TIMEOUT;
+
+ mmc_delay(10);
+ }
+
+ if (rocr)
+ *rocr = cmd.resp[0];
+
+ return err;
+}
+
+int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
+{
+ struct mmc_command cmd;
+ int err;
+ static const u8 test_pattern = 0xAA;
+
+ /*
+ * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
+ * before SD_APP_OP_COND. This command will harmlessly fail for
+ * SD 1.0 cards.
+ */
+ cmd.opcode = SD_SEND_IF_COND;
+ cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
+ cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ if ((cmd.resp[0] & 0xFF) != test_pattern)
+ return MMC_ERR_FAILED;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
+{
+ int err;
+ struct mmc_command cmd;
+
+ BUG_ON(!host);
+ BUG_ON(!rca);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_SEND_RELATIVE_ADDR;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ *rca = cmd.resp[0] >> 16;
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
+{
+ int err;
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+ BUG_ON(!scr);
+
+ err = mmc_app_cmd(card->host, card);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = SD_APP_SEND_SCR;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 8;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, scr, 8);
+
+ mmc_set_data_timeout(&data, card, 0);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error != MMC_ERR_NONE)
+ return cmd.error;
+ if (data.error != MMC_ERR_NONE)
+ return data.error;
+
+ scr[0] = ntohl(scr[0]);
+ scr[1] = ntohl(scr[1]);
+
+ return MMC_ERR_NONE;
+}
+
+int mmc_sd_switch(struct mmc_card *card, int mode, int group,
+ u8 value, u8 *resp)
+{
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
+ mode = !!mode;
+ value &= 0xF;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = SD_SWITCH;
+ cmd.arg = mode << 31 | 0x00FFFFFF;
+ cmd.arg &= ~(0xF << (group * 4));
+ cmd.arg |= value << (group * 4);
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 64;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, resp, 64);
+
+ mmc_set_data_timeout(&data, card, 0);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error != MMC_ERR_NONE)
+ return cmd.error;
+ if (data.error != MMC_ERR_NONE)
+ return data.error;
+
+ return MMC_ERR_NONE;
+}
+
--- /dev/null
+/*
+ * linux/drivers/mmc/sd_ops.h
+ *
+ * Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_SD_OPS_H
+#define _MMC_SD_OPS_H
+
+int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
+int mmc_app_set_bus_width(struct mmc_card *card, int width);
+int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
+int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
+int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
+int mmc_app_send_scr(struct mmc_card *card, u32 *scr);
+int mmc_sd_switch(struct mmc_card *card, int mode, int group,
+ u8 value, u8 *resp);
+
+#endif
+
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include "core.h"
+#include "sysfs.h"
#define dev_to_mmc_card(d) container_of(d, struct mmc_card, dev)
#define to_mmc_driver(d) container_of(d, struct mmc_driver, drv)
--- /dev/null
+/*
+ * linux/drivers/mmc/core/sysfs.h
+ *
+ * Copyright (C) 2003 Russell King, All Rights Reserved.
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _MMC_CORE_SYSFS_H
+#define _MMC_CORE_SYSFS_H
+
+void mmc_init_card(struct mmc_card *card, struct mmc_host *host);
+int mmc_register_card(struct mmc_card *card);
+void mmc_remove_card(struct mmc_card *card);
+
+struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev);
+int mmc_add_host_sysfs(struct mmc_host *host);
+void mmc_remove_host_sysfs(struct mmc_host *host);
+void mmc_free_host_sysfs(struct mmc_host *host);
+
+int mmc_schedule_work(struct work_struct *work);
+int mmc_schedule_delayed_work(struct delayed_work *work, unsigned long delay);
+void mmc_flush_scheduled_work(void);
+
+#endif
extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
-extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int,
+extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
* 15 May 2002
*/
-#ifndef MMC_MMC_PROTOCOL_H
-#define MMC_MMC_PROTOCOL_H
+#ifndef MMC_MMC_H
+#define MMC_MMC_H
/* Standard MMC commands (4.1) type argument response */
/* class 1 */
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
-/* SD commands type argument response */
- /* class 0 */
-/* This is basically the same command as for MMC with some quirks. */
-#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
-#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
-
- /* class 10 */
-#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
-
- /* Application commands */
-#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
-#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
-#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
-#define SD_APP_SEND_SCR 51 /* adtc R1 */
-
/*
* MMC_SWITCH argument format:
*
* [02:00] Command Set
*/
-/*
- * SD_SWITCH argument format:
- *
- * [31] Check (0) or switch (1)
- * [30:24] Reserved (0)
- * [23:20] Function group 6
- * [19:16] Function group 5
- * [15:12] Function group 4
- * [11:8] Function group 3
- * [7:4] Function group 2
- * [3:0] Function group 1
- */
-
-/*
- * SD_SEND_IF_COND argument format:
- *
- * [31:12] Reserved (0)
- * [11:8] Host Voltage Supply Flags
- * [7:0] Check Pattern (0xAA)
- */
-
/*
MMC status in R1
Type
#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
-/*
- * SCR field definitions
- */
-
-#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */
-#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */
-#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */
-
-/*
- * SD bus widths
- */
-#define SD_BUS_WIDTH_1 0
-#define SD_BUS_WIDTH_4 2
-
#endif /* MMC_MMC_PROTOCOL_H */
--- /dev/null
+/*
+ * include/linux/mmc/sd.h
+ *
+ * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SD_H
+#define MMC_SD_H
+
+/* SD commands type argument response */
+ /* class 0 */
+/* This is basically the same command as for MMC with some quirks. */
+#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
+#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
+
+ /* class 10 */
+#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
+
+ /* Application commands */
+#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
+#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
+#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
+#define SD_APP_SEND_SCR 51 /* adtc R1 */
+
+/*
+ * SD_SWITCH argument format:
+ *
+ * [31] Check (0) or switch (1)
+ * [30:24] Reserved (0)
+ * [23:20] Function group 6
+ * [19:16] Function group 5
+ * [15:12] Function group 4
+ * [11:8] Function group 3
+ * [7:4] Function group 2
+ * [3:0] Function group 1
+ */
+
+/*
+ * SD_SEND_IF_COND argument format:
+ *
+ * [31:12] Reserved (0)
+ * [11:8] Host Voltage Supply Flags
+ * [7:0] Check Pattern (0xAA)
+ */
+
+/*
+ * SCR field definitions
+ */
+
+#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */
+#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */
+#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */
+
+/*
+ * SD bus widths
+ */
+#define SD_BUS_WIDTH_1 0
+#define SD_BUS_WIDTH_4 2
+
+/*
+ * SD_SWITCH mode
+ */
+#define SD_SWITCH_CHECK 0
+#define SD_SWITCH_SET 1
+
+/*
+ * SD_SWITCH function groups
+ */
+#define SD_SWITCH_GRP_ACCESS 0
+
+/*
+ * SD_SWITCH access modes
+ */
+#define SD_SWITCH_ACCESS_DEF 0
+#define SD_SWITCH_ACCESS_HS 1
+
+#endif
+
git.openpandora.org / pandora-kernel.git / commitdiff