dm9000: Move the Davicom driver

Move the Davicom driver into drivers/net/ethernet/davicom/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e83f559..23155cc 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -246,34 +246,6 @@ config NET_NETX
          To compile this driver as a module, choose M here. The module
          will be called netx-eth.
 
-config DM9000
-       tristate "DM9000 support"
-       depends on ARM || BLACKFIN || MIPS
-       select CRC32
-       select MII
-       ---help---
-         Support for DM9000 chipset.
-
-         To compile this driver as a module, choose M here.  The module
-         will be called dm9000.
-
-config DM9000_DEBUGLEVEL
-       int "DM9000 maximum debug level"
-       depends on DM9000
-       default 4
-       help
-         The maximum level of debugging code compiled into the DM9000
-         driver.
-
-config DM9000_FORCE_SIMPLE_PHY_POLL
-       bool "Force simple NSR based PHY polling"
-       depends on DM9000
-       ---help---
-         This configuration forces the DM9000 to use the NSR's LinkStatus
-         bit to determine if the link is up or down instead of the more
-         costly MII PHY reads. Note, this will not work if the chip is
-         operating with an external PHY.
-
 config NET_PCI
        bool "EISA, VLB, PCI and on board controllers"
        depends on ISA || EISA || PCI

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 08ee56f..298587f 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DM9000) += dm9000.o
 
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 0cec25c..45eef59 100644 (file)
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -24,6 +24,7 @@ source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/cirrus/Kconfig"
 source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/davicom/Kconfig"
 
 config DNET
        tristate "Dave ethernet support (DNET)"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ebe8aee..dfd5146 100644 (file)
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
 obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_DM9000) += davicom/
 obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_NET_VENDOR_DEC) += dec/
 obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/

diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
new file mode 100644 (file)
index 0000000..1809d25
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -0,0 +1,31 @@
+#
+# Davicom device configuration
+#
+
+config DM9000
+       tristate "DM9000 support"
+       depends on ARM || BLACKFIN || MIPS
+       select CRC32
+       select MII
+       ---help---
+         Support for DM9000 chipset.
+
+         To compile this driver as a module, choose M here.  The module
+         will be called dm9000.
+
+config DM9000_DEBUGLEVEL
+       int "DM9000 maximum debug level"
+       depends on DM9000
+       default 4
+       ---help---
+         The maximum level of debugging code compiled into the DM9000
+         driver.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+       bool "Force simple NSR based PHY polling"
+       depends on DM9000
+       ---help---
+         This configuration forces the DM9000 to use the NSR's LinkStatus
+         bit to determine if the link is up or down instead of the more
+         costly MII PHY reads. Note, this will not work if the chip is
+         operating with an external PHY.

diff --git a/drivers/net/ethernet/davicom/Makefile b/drivers/net/ethernet/davicom/Makefile
new file mode 100644 (file)
index 0000000..74b31f0
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Davicom device drivers.
+#
+
+obj-$(CONFIG_DM9000) += dm9000.o

diff --git a/drivers/net/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
similarity index 100%
rename from drivers/net/dm9000.c
rename to drivers/net/ethernet/davicom/dm9000.c

diff --git a/drivers/net/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h
similarity index 100%
rename from drivers/net/dm9000.h
rename to drivers/net/ethernet/davicom/dm9000.h