Merge master.kernel.org:/home/rmk/linux-2.6-serial

diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c
index 7e98434..9783caf 100644 (file)
--- a/drivers/misc/ibmasm/uart.c
+++ b/drivers/misc/ibmasm/uart.c
@@ -50,7 +50,7 @@ void ibmasm_register_uart(struct service_processor *sp)
        memset(&uport, 0, sizeof(struct uart_port));
        uport.irq       = sp->irq;
        uport.uartclk   = 3686400;
-       uport.flags     = UPF_AUTOPROBE | UPF_SHARE_IRQ;
+       uport.flags     = UPF_SHARE_IRQ;
        uport.iotype    = UPIO_MEM;
        uport.membase   = iomem_base;
 

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 221999b..7aef751 100644 (file)
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -366,7 +366,7 @@ static struct uart_port serial21285_port = {
        .irq            = NO_IRQ,
        .fifosize       = 16,
        .ops            = &serial21285_ops,
-       .flags          = ASYNC_BOOT_AUTOCONF,
+       .flags          = UPF_BOOT_AUTOCONF,
 };
 
 static void serial21285_setup_ports(void)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index bc36edf..179c1f0 100644 (file)
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
-#include <linux/mca.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
@@ -2026,12 +2025,6 @@ static void serial8250_config_port(struct uart_port *port, int flags)
        int probeflags = PROBE_ANY;
        int ret;
 
-       /*
-        * Don't probe for MCA ports on non-MCA machines.
-        */
-       if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus)
-               return;
-
        /*
         * Find the region that we can probe for.  This in turn
         * tells us whether we can probe for the type of port.
@@ -2164,7 +2157,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 /*
  *     Wait for transmitter & holding register to empty
  */
-static inline void wait_for_xmitr(struct uart_8250_port *up)
+static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
 {
        unsigned int status, tmout = 10000;
 
@@ -2178,7 +2171,7 @@ static inline void wait_for_xmitr(struct uart_8250_port *up)
                if (--tmout == 0)
                        break;
                udelay(1);
-       } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+       } while ((status & bits) != bits);
 
        /* Wait up to 1s for flow control if necessary */
        if (up->port.flags & UPF_CONS_FLOW) {
@@ -2218,7 +2211,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
         *      Now, do each character
         */
        for (i = 0; i < count; i++, s++) {
-               wait_for_xmitr(up);
+               wait_for_xmitr(up, UART_LSR_THRE);
 
                /*
                 *      Send the character out.
@@ -2226,7 +2219,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
                 */
                serial_out(up, UART_TX, *s);
                if (*s == 10) {
-                       wait_for_xmitr(up);
+                       wait_for_xmitr(up, UART_LSR_THRE);
                        serial_out(up, UART_TX, 13);
                }
        }
@@ -2235,8 +2228,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
         *      Finally, wait for transmitter to become empty
         *      and restore the IER
         */
-       wait_for_xmitr(up);
-       serial_out(up, UART_IER, ier);
+       wait_for_xmitr(up, BOTH_EMPTY);
+       serial_out(up, UART_IER, ier | UART_IER_THRI);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9fd1925..0d38f0f 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -23,7 +23,7 @@ config SERIAL_8250
          work.)
 
          To compile this driver as a module, choose M here: the
-         module will be called serial.
+         module will be called 8250.
          [WARNING: Do not compile this driver as a module if you are using
          non-standard serial ports, since the configuration information will
          be lost when the driver is unloaded.  This limitation may be lifted

diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 3490022..429de27 100644 (file)
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -566,7 +566,7 @@ static struct uart_amba_port amba_ports[UART_NR] = {
                        .uartclk        = 14745600,
                        .fifosize       = 16,
                        .ops            = &amba_pl010_pops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .dtr_mask       = 1 << 5,
@@ -581,7 +581,7 @@ static struct uart_amba_port amba_ports[UART_NR] = {
                        .uartclk        = 14745600,
                        .fifosize       = 16,
                        .ops            = &amba_pl010_pops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .dtr_mask       = 1 << 7,

diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 8ef9994..ce7b2e4 100644 (file)
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -410,7 +410,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
                .fifosize       = 16,
                .ops            = &clps711x_pops,
                .line           = 0,
-               .flags          = ASYNC_BOOT_AUTOCONF,
+               .flags          = UPF_BOOT_AUTOCONF,
        },
        {
                .iobase         = SYSCON2,
@@ -419,7 +419,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
                .fifosize       = 16,
                .ops            = &clps711x_pops,
                .line           = 1,
-               .flags          = ASYNC_BOOT_AUTOCONF,
+               .flags          = UPF_BOOT_AUTOCONF,
        }
 };
 

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index fa3bbd6..858048e 100644 (file)
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -674,7 +674,7 @@ static struct imx_port imx_ports[] = {
                .irq            = UART1_MINT_RX,
                .uartclk        = 16000000,
                .fifosize       = 8,
-               .flags          = ASYNC_BOOT_AUTOCONF,
+               .flags          = UPF_BOOT_AUTOCONF,
                .ops            = &imx_pops,
                .line           = 0,
        },
@@ -690,7 +690,7 @@ static struct imx_port imx_ports[] = {
                .irq            = UART2_MINT_RX,
                .uartclk        = 16000000,
                .fifosize       = 8,
-               .flags          = ASYNC_BOOT_AUTOCONF,
+               .flags          = UPF_BOOT_AUTOCONF,
                .ops            = &imx_pops,
                .line           = 1,
        },

diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 1bd9316..ff7b60b 100644 (file)
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -665,21 +665,21 @@ void __init sa1100_register_uart(int idx, int port)
                sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0;
                sa1100_ports[idx].port.mapbase = _Ser1UTCR0;
                sa1100_ports[idx].port.irq     = IRQ_Ser1UART;
-               sa1100_ports[idx].port.flags   = ASYNC_BOOT_AUTOCONF;
+               sa1100_ports[idx].port.flags   = UPF_BOOT_AUTOCONF;
                break;
 
        case 2:
                sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0;
                sa1100_ports[idx].port.mapbase = _Ser2UTCR0;
                sa1100_ports[idx].port.irq     = IRQ_Ser2ICP;
-               sa1100_ports[idx].port.flags   = ASYNC_BOOT_AUTOCONF;
+               sa1100_ports[idx].port.flags   = UPF_BOOT_AUTOCONF;
                break;
 
        case 3:
                sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0;
                sa1100_ports[idx].port.mapbase = _Ser3UTCR0;
                sa1100_ports[idx].port.irq     = IRQ_Ser3UART;
-               sa1100_ports[idx].port.flags   = ASYNC_BOOT_AUTOCONF;
+               sa1100_ports[idx].port.flags   = UPF_BOOT_AUTOCONF;
                break;
 
        default:

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 9437704..0717abf 100644 (file)
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -332,7 +332,7 @@ uart_get_baud_rate(struct uart_port *port, struct termios *termios,
                   struct termios *old, unsigned int min, unsigned int max)
 {
        unsigned int try, baud, altbaud = 38400;
-       unsigned int flags = port->flags & UPF_SPD_MASK;
+       upf_t flags = port->flags & UPF_SPD_MASK;
 
        if (flags == UPF_SPD_HI)
                altbaud = 57600;
@@ -615,8 +615,9 @@ static int uart_set_info(struct uart_state *state,
        struct serial_struct new_serial;
        struct uart_port *port = state->port;
        unsigned long new_port;
-       unsigned int change_irq, change_port, old_flags, closing_wait;
+       unsigned int change_irq, change_port, closing_wait;
        unsigned int old_custom_divisor, close_delay;
+       upf_t old_flags, new_flags;
        int retval = 0;
 
        if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
@@ -655,6 +656,7 @@ static int uart_set_info(struct uart_state *state,
                      new_serial.type != port->type;
 
        old_flags = port->flags;
+       new_flags = new_serial.flags;
        old_custom_divisor = port->custom_divisor;
 
        if (!capable(CAP_SYS_ADMIN)) {
@@ -664,10 +666,10 @@ static int uart_set_info(struct uart_state *state,
                    (close_delay != state->close_delay) ||
                    (closing_wait != state->closing_wait) ||
                    (new_serial.xmit_fifo_size != port->fifosize) ||
-                   (((new_serial.flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+                   (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
                        goto exit;
                port->flags = ((port->flags & ~UPF_USR_MASK) |
-                              (new_serial.flags & UPF_USR_MASK));
+                              (new_flags & UPF_USR_MASK));
                port->custom_divisor = new_serial.custom_divisor;
                goto check_and_exit;
        }
@@ -764,7 +766,7 @@ static int uart_set_info(struct uart_state *state,
        port->irq              = new_serial.irq;
        port->uartclk          = new_serial.baud_base * 16;
        port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
-                                (new_serial.flags & UPF_CHANGE_MASK);
+                                (new_flags & UPF_CHANGE_MASK);
        port->custom_divisor   = new_serial.custom_divisor;
        state->close_delay     = close_delay;
        state->closing_wait    = closing_wait;
@@ -1870,7 +1872,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
        mutex_lock(&state->mutex);
 
        if (state->info && state->info->flags & UIF_INITIALIZED) {
-               struct uart_ops *ops = port->ops;
+               const struct uart_ops *ops = port->ops;
 
                spin_lock_irq(&port->lock);
                ops->stop_tx(port);
@@ -1932,7 +1934,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
        }
 
        if (state->info && state->info->flags & UIF_INITIALIZED) {
-               struct uart_ops *ops = port->ops;
+               const struct uart_ops *ops = port->ops;
                int ret;
 
                ops->set_mctrl(port, 0);

diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index d4a1f0e..d0490f6 100644 (file)
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -506,7 +506,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
                        .uartclk        = 14745600/2,
                        .fifosize       = 16,
                        .ops            = &lh7a40x_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
        },
@@ -519,7 +519,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
                        .uartclk        = 14745600/2,
                        .fifosize       = 16,
                        .ops            = &lh7a40x_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
        },
@@ -532,7 +532,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
                        .uartclk        = 14745600/2,
                        .fifosize       = 16,
                        .ops            = &lh7a40x_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 2,
                },
        },

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a9e0707..0111206 100644 (file)
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1113,10 +1113,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xfffffe80,
                        .mapbase        = 0xfffffe80,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 25,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCI,
@@ -1128,10 +1128,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)SCIF0,
                        .mapbase        = SCIF0,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 55,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1142,10 +1142,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)SCIF2,
                        .mapbase        = SCIF2,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 59,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCIF,
@@ -1157,10 +1157,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xfffffe80,
                        .mapbase        = 0xfffffe80,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 25,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCI,
@@ -1171,10 +1171,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xa4000150,
                        .mapbase        = 0xa4000150,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 59,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCIF,
@@ -1185,10 +1185,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xa4000140,
                        .mapbase        = 0xa4000140,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 55,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 2,
                },
                .type           = PORT_IRDA,
@@ -1200,10 +1200,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xA4430000,
                        .mapbase        = 0xA4430000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 25,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1215,10 +1215,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe00000,
                        .mapbase        = 0xffe00000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 25,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1230,10 +1230,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe80000,
                        .mapbase        = 0xffe80000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 43,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1245,10 +1245,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe00000,
                        .mapbase        = 0xffe00000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 25,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCI,
@@ -1259,10 +1259,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe80000,
                        .mapbase        = 0xffe80000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 43,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCIF,
@@ -1274,10 +1274,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xfe600000,
                        .mapbase        = 0xfe600000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 55,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1288,10 +1288,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xfe610000,
                        .mapbase        = 0xfe610000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 75,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCIF,
@@ -1302,10 +1302,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xfe620000,
                        .mapbase        = 0xfe620000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 79,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 2,
                },
                .type           = PORT_SCIF,
@@ -1317,10 +1317,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe80000,
                        .mapbase        = 0xffe80000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 43,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1332,10 +1332,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe00000,
                        .mapbase        = 0xffe00000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 26,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1346,10 +1346,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0xffe80000,
                        .mapbase        = 0xffe80000,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 43,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCIF,
@@ -1359,10 +1359,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
        {
                .port   = {
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 42,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCIF,
@@ -1374,10 +1374,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0x00ffffb0,
                        .mapbase        = 0x00ffffb0,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 54,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCI,
@@ -1388,10 +1388,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0x00ffffb8,
                        .mapbase        = 0x00ffffb8,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 58,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCI,
@@ -1402,10 +1402,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0x00ffffc0,
                        .mapbase        = 0x00ffffc0,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 62,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 2,
                },
                .type           = PORT_SCI,
@@ -1417,10 +1417,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0x00ffff78,
                        .mapbase        = 0x00ffff78,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 90,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 0,
                },
                .type           = PORT_SCI,
@@ -1431,10 +1431,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0x00ffff80,
                        .mapbase        = 0x00ffff80,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 94,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 1,
                },
                .type           = PORT_SCI,
@@ -1445,10 +1445,10 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                .port   = {
                        .membase        = (void *)0x00ffff88,
                        .mapbase        = 0x00ffff88,
-                       .iotype         = SERIAL_IO_MEM,
+                       .iotype         = UPIO_MEM,
                        .irq            = 98,
                        .ops            = &sci_uart_ops,
-                       .flags          = ASYNC_BOOT_AUTOCONF,
+                       .flags          = UPF_BOOT_AUTOCONF,
                        .line           = 2,
                },
                .type           = PORT_SCI,

diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9a3665b..bc67442 100644 (file)
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -669,7 +669,7 @@ static int sunsu_startup(struct uart_port *port)
         * if it is, then bail out, because there's likely no UART
         * here.
         */
-       if (!(up->port.flags & ASYNC_BUGGY_UART) &&
+       if (!(up->port.flags & UPF_BUGGY_UART) &&
            (serial_inp(up, UART_LSR) == 0xff)) {
                printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
                return -ENODEV;
@@ -707,7 +707,7 @@ static int sunsu_startup(struct uart_port *port)
        up->ier = UART_IER_RLSI | UART_IER_RDI;
        serial_outp(up, UART_IER, up->ier);
 
-       if (up->port.flags & ASYNC_FOURPORT) {
+       if (up->port.flags & UPF_FOURPORT) {
                unsigned int icp;
                /*
                 * Enable interrupts on the AST Fourport board
@@ -740,7 +740,7 @@ static void sunsu_shutdown(struct uart_port *port)
        serial_outp(up, UART_IER, 0);
 
        spin_lock_irqsave(&up->port.lock, flags);
-       if (up->port.flags & ASYNC_FOURPORT) {
+       if (up->port.flags & UPF_FOURPORT) {
                /* reset interrupts on the AST Fourport board */
                inb((up->port.iobase & 0xfe0) | 0x1f);
                up->port.mctrl |= TIOCM_OUT1;
@@ -1132,7 +1132,7 @@ ebus_done:
 
        spin_lock_irqsave(&up->port.lock, flags);
 
-       if (!(up->port.flags & ASYNC_BUGGY_UART)) {
+       if (!(up->port.flags & UPF_BUGGY_UART)) {
                /*
                 * Do a simple existence test first; if we fail this, there's
                 * no point trying anything else.
@@ -1170,7 +1170,7 @@ ebus_done:
         * manufacturer would be stupid enough to design a board
         * that conflicts with COM 1-4 --- we hope!
         */
-       if (!(up->port.flags & ASYNC_SKIP_TEST)) {
+       if (!(up->port.flags & UPF_SKIP_TEST)) {
                serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
                status1 = serial_inp(up, UART_MSR) & 0xF0;
                serial_outp(up, UART_MCR, save_mcr);
@@ -1371,7 +1371,7 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
        } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
 
        /* Wait up to 1s for flow control if necessary */
-       if (up->port.flags & ASYNC_CONS_FLOW) {
+       if (up->port.flags & UPF_CONS_FLOW) {
                tmout = 1000000;
                while (--tmout &&
                       ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
@@ -1513,7 +1513,7 @@ static int __init sunsu_serial_init(void)
                    up->su_type == SU_PORT_KBD)
                        continue;
 
-               up->port.flags |= ASYNC_BOOT_AUTOCONF;
+               up->port.flags |= UPF_BOOT_AUTOCONF;
                up->port.type = PORT_UNKNOWN;
                up->port.uartclk = (SU_BASE_BAUD * 16);
 

diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index cee302a..73b464f 100644 (file)
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -26,7 +26,7 @@ struct plat_serial8250_port {
        unsigned char   regshift;       /* register shift */
        unsigned char   iotype;         /* UPIO_* */
        unsigned char   hub6;
-       unsigned int    flags;          /* UPF_* flags */
+       upf_t           flags;          /* UPF_* flags */
 };
 
 /*

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index ec35100..4041122 100644 (file)
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -203,6 +203,8 @@ struct uart_icount {
        __u32   buf_overrun;
 };
 
+typedef unsigned int __bitwise__ upf_t;
+
 struct uart_port {
        spinlock_t              lock;                   /* port lock */
        unsigned int            iobase;                 /* in/out[bwl] */
@@ -230,36 +232,34 @@ struct uart_port {
        unsigned long           sysrq;                  /* sysrq timeout */
 #endif
 
-       unsigned int            flags;
-
-#define UPF_FOURPORT           (1 << 1)
-#define UPF_SAK                        (1 << 2)
-#define UPF_SPD_MASK           (0x1030)
-#define UPF_SPD_HI             (0x0010)
-#define UPF_SPD_VHI            (0x0020)
-#define UPF_SPD_CUST           (0x0030)
-#define UPF_SPD_SHI            (0x1000)
-#define UPF_SPD_WARP           (0x1010)
-#define UPF_SKIP_TEST          (1 << 6)
-#define UPF_AUTO_IRQ           (1 << 7)
-#define UPF_HARDPPS_CD         (1 << 11)
-#define UPF_LOW_LATENCY                (1 << 13)
-#define UPF_BUGGY_UART         (1 << 14)
-#define UPF_AUTOPROBE          (1 << 15)
-#define UPF_MAGIC_MULTIPLIER   (1 << 16)
-#define UPF_BOOT_ONLYMCA       (1 << 22)
-#define UPF_CONS_FLOW          (1 << 23)
-#define UPF_SHARE_IRQ          (1 << 24)
-#define UPF_BOOT_AUTOCONF      (1 << 28)
-#define UPF_IOREMAP            (1 << 31)
-
-#define UPF_CHANGE_MASK                (0x17fff)
-#define UPF_USR_MASK           (UPF_SPD_MASK|UPF_LOW_LATENCY)
+       upf_t                   flags;
+
+#define UPF_FOURPORT           ((__force upf_t) (1 << 1))
+#define UPF_SAK                        ((__force upf_t) (1 << 2))
+#define UPF_SPD_MASK           ((__force upf_t) (0x1030))
+#define UPF_SPD_HI             ((__force upf_t) (0x0010))
+#define UPF_SPD_VHI            ((__force upf_t) (0x0020))
+#define UPF_SPD_CUST           ((__force upf_t) (0x0030))
+#define UPF_SPD_SHI            ((__force upf_t) (0x1000))
+#define UPF_SPD_WARP           ((__force upf_t) (0x1010))
+#define UPF_SKIP_TEST          ((__force upf_t) (1 << 6))
+#define UPF_AUTO_IRQ           ((__force upf_t) (1 << 7))
+#define UPF_HARDPPS_CD         ((__force upf_t) (1 << 11))
+#define UPF_LOW_LATENCY                ((__force upf_t) (1 << 13))
+#define UPF_BUGGY_UART         ((__force upf_t) (1 << 14))
+#define UPF_MAGIC_MULTIPLIER   ((__force upf_t) (1 << 16))
+#define UPF_CONS_FLOW          ((__force upf_t) (1 << 23))
+#define UPF_SHARE_IRQ          ((__force upf_t) (1 << 24))
+#define UPF_BOOT_AUTOCONF      ((__force upf_t) (1 << 28))
+#define UPF_IOREMAP            ((__force upf_t) (1 << 31))
+
+#define UPF_CHANGE_MASK                ((__force upf_t) (0x17fff))
+#define UPF_USR_MASK           ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
 
        unsigned int            mctrl;                  /* current modem ctrl settings */
        unsigned int            timeout;                /* character-based timeout */
        unsigned int            type;                   /* port type */
-       struct uart_ops         *ops;
+       const struct uart_ops   *ops;
        unsigned int            custom_divisor;
        unsigned int            line;                   /* port index */
        unsigned long           mapbase;                /* for ioremap */
@@ -289,6 +289,9 @@ struct uart_state {
 };
 
 #define UART_XMIT_SIZE PAGE_SIZE
+
+typedef unsigned int __bitwise__ uif_t;
+
 /*
  * This is the state information which is only valid when the port
  * is open; it may be freed by the core driver once the device has
@@ -298,17 +301,16 @@ struct uart_state {
 struct uart_info {
        struct tty_struct       *tty;
        struct circ_buf         xmit;
-       unsigned int            flags;
+       uif_t                   flags;
 
 /*
- * These are the flags that specific to info->flags, and reflect our
- * internal state.  They can not be accessed via port->flags.  Low
- * level drivers must not change these, but may query them instead.
+ * Definitions for info->flags.  These are _private_ to serial_core, and
+ * are specific to this structure.  They may be queried by low level drivers.
  */
-#define UIF_CHECK_CD           (1 << 25)
-#define UIF_CTS_FLOW           (1 << 26)
-#define UIF_NORMAL_ACTIVE      (1 << 29)
-#define UIF_INITIALIZED                (1 << 31)
+#define UIF_CHECK_CD           ((__force uif_t) (1 << 25))
+#define UIF_CTS_FLOW           ((__force uif_t) (1 << 26))
+#define UIF_NORMAL_ACTIVE      ((__force uif_t) (1 << 29))
+#define UIF_INITIALIZED                ((__force uif_t) (1 << 31))
 
        int                     blocked_open;
 
@@ -430,7 +432,7 @@ static inline int uart_handle_break(struct uart_port *port)
                port->sysrq = 0;
        }
 #endif
-       if (info->flags & UPF_SAK)
+       if (port->flags & UPF_SAK)
                do_SAK(info->tty);
        return 0;
 }