- arm,filter-ranges : <start length> Starting address and length of window to
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
+- arm,io-coherent : indicates that the system is operating in an hardware
+ I/O coherent mode. Valid only when the arm,pl310-cache compatible
+ string is used.
- interrupts : 1 combined interrupt.
- cache-id-part: cache id part number to be used if it is not present
on hardware
struct scoop_config *inf;
struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int ret;
- int temp;
if (!mem)
return -EINVAL;
struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS];
};
-extern unsigned long sync_phys; /* physical address of *mcpm_sync */
-
void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster);
void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster);
void __mcpm_outbound_leave_critical(unsigned int cluster, int state);
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
#define thread_saved_sp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
+
+#ifndef CONFIG_THUMB2_KERNEL
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
+#else
+#define thread_saved_fp(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.r7))
+#endif
extern void crunch_task_disable(struct thread_info *);
extern void crunch_task_copy(struct thread_info *, void *);
struct perf_event *event)
{
int idx;
- int bit;
+ int bit = -1;
unsigned int prefix;
unsigned int region;
unsigned int code;
}
idx = armv7pmu_get_event_idx(cpuc, event);
- if (idx < 0 && krait_event)
+ if (idx < 0 && bit >= 0)
clear_bit(bit, cpuc->used_mask);
return idx;
PTRACE_SYSCALL_EXIT,
};
-static int tracehook_report_syscall(struct pt_regs *regs,
+static void tracehook_report_syscall(struct pt_regs *regs,
enum ptrace_syscall_dir dir)
{
unsigned long ip;
current_thread_info()->syscall = -1;
regs->ARM_ip = ip;
- return current_thread_info()->syscall;
}
asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
return -1;
if (test_thread_flag(TIF_SYSCALL_TRACE))
- scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
+ tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
+
+ scno = current_thread_info()->syscall;
if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
trace_sys_enter(regs, scno);
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
- select PL310_ERRATA_588369 if CACHE_PL310
- select PL310_ERRATA_727915 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
+ select PL310_ERRATA_588369 if CACHE_L2X0
+ select PL310_ERRATA_727915 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
- select PL310_ERRATA_588369 if CACHE_PL310
- select PL310_ERRATA_727915 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
+ select PL310_ERRATA_588369 if CACHE_L2X0
+ select PL310_ERRATA_727915 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
- select PL310_ERRATA_588369
- select PL310_ERRATA_727915
+ select PL310_ERRATA_588369 if CACHE_L2X0
+ select PL310_ERRATA_727915 if CACHE_L2X0
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select ARM_ERRATA_754322
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = 0x00e20000,
+ }, {
+ .name = "bootblock",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x00020000,
+ .mask_flags = MTD_WRITEABLE
}
};
}
static struct flash_platform_data collie_flash_data = {
- .map_name = "jedec_probe",
+ .map_name = "cfi_probe",
.init = collie_flash_init,
.set_vpp = collie_set_vpp,
.exit = collie_flash_exit,
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
- select PL310_ERRATA_753970 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
+ select PL310_ERRATA_753970 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
help
Include support for STiH41x SOCs like STiH415/416 using the device tree
for discovery
select PINCTRL
select PINCTRL_ABX500
select PINCTRL_NOMADIK
- select PL310_ERRATA_753970 if CACHE_PL310
+ select PL310_ERRATA_753970 if CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
bool "Enable A5 and A9 only errata work-arounds"
default y
select ARM_ERRATA_720789
- select PL310_ERRATA_753970 if CACHE_PL310
+ select PL310_ERRATA_753970 if CACHE_L2X0
help
Provides common dependencies for Versatile Express platforms
based on Cortex-A5 and Cortex-A9 processors. In order to
help
This option enables the L2x0 PrimeCell.
+if CACHE_L2X0
+
config CACHE_PL310
bool
- depends on CACHE_L2X0
default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
help
This option enables optimisations for the PL310 cache
config PL310_ERRATA_588369
bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
- depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
config PL310_ERRATA_727915
bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
- depends on CACHE_L2X0
help
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
operation (offset 0x7FC). This operation runs in background so that
config PL310_ERRATA_753970
bool "PL310 errata: cache sync operation may be faulty"
- depends on CACHE_PL310
help
This option enables the workaround for the 753970 PL310 (r3p0) erratum.
config PL310_ERRATA_769419
bool "PL310 errata: no automatic Store Buffer drain"
- depends on CACHE_L2X0
help
On revisions of the PL310 prior to r3p2, the Store Buffer does
not automatically drain. This can cause normal, non-cacheable
on systems with an outer cache, the store buffer is drained
explicitly.
+endif
+
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
{
- unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
+ unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
if (rev >= L310_CACHE_ID_RTL_R2P0) {
},
};
+/*
+ * This is a variant of the of_l2c310_data with .sync set to
+ * NULL. Outer sync operations are not needed when the system is I/O
+ * coherent, and potentially harmful in certain situations (PCIe/PL310
+ * deadlock on Armada 375/38x due to hardware I/O coherency). The
+ * other operations are kept because they are infrequent (therefore do
+ * not cause the deadlock in practice) and needed for secondary CPU
+ * boot and other power management activities.
+ */
+static const struct l2c_init_data of_l2c310_coherent_data __initconst = {
+ .type = "L2C-310 Coherent",
+ .way_size_0 = SZ_8K,
+ .num_lock = 8,
+ .of_parse = l2c310_of_parse,
+ .enable = l2c310_enable,
+ .fixup = l2c310_fixup,
+ .save = l2c310_save,
+ .outer_cache = {
+ .inv_range = l2c210_inv_range,
+ .clean_range = l2c210_clean_range,
+ .flush_range = l2c210_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c310_disable,
+ .resume = l2c310_resume,
+ },
+};
+
/*
* Note that the end addresses passed to Linux primitives are
* noninclusive, while the hardware cache range operations use
data = of_match_node(l2x0_ids, np)->data;
+ if (of_device_is_compatible(np, "arm,pl310-cache") &&
+ of_property_read_bool(np, "arm,io-coherent"))
+ data = &of_l2c310_coherent_data;
+
old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
if (old_aux != ((old_aux & aux_mask) | aux_val)) {
pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",
sanity_check_meminfo_mpu();
end = memblock_end_of_DRAM();
high_memory = __va(end - 1) + 1;
+ memblock_set_current_limit(end);
}
/*
.long \cpu_val
.long \cpu_mask
.long PMD_TYPE_SECT | \
+ PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
git.openpandora.org / pandora-kernel.git / commitdiff