drm/i915/crt: Introduce struct intel_crt
authorChris Wilson <chris@chris-wilson.co.uk>
Tue, 16 Nov 2010 10:58:37 +0000 (10:58 +0000)
committerChris Wilson <chris@chris-wilson.co.uk>
Fri, 19 Nov 2010 09:30:28 +0000 (09:30 +0000)
We will use this structure in future patches to store CRT specific
information on the encoder.

Split out and tweaked from a patch by Keith Packard.

Signed-off-by: Keith Packard <keithp@kithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
drivers/gpu/drm/i915/intel_crt.c

index c55c770..e38bc67 100644 (file)
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+struct intel_crt {
+       struct intel_encoder base;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+       return container_of(intel_attached_encoder(connector),
+                           struct intel_crt, base);
+}
+
 static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 {
        struct drm_device *dev = encoder->dev;
@@ -277,13 +287,12 @@ static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
        return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
 }
 
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_detect_ddc(struct intel_crt *crt)
 {
-       struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-       struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+       struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
 
        /* CRT should always be at 0, but check anyway */
-       if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+       if (crt->base.type != INTEL_OUTPUT_ANALOG)
                return false;
 
        if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
@@ -291,7 +300,7 @@ static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
                return true;
        }
 
-       if (intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin)) {
+       if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
                DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
                return true;
        }
@@ -300,9 +309,9 @@ static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 }
 
 static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
 {
-       struct drm_encoder *encoder = &intel_encoder->base;
+       struct drm_encoder *encoder = &crt->base.base;
        struct drm_device *dev = encoder->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -434,7 +443,7 @@ static enum drm_connector_status
 intel_crt_detect(struct drm_connector *connector, bool force)
 {
        struct drm_device *dev = connector->dev;
-       struct intel_encoder *encoder = intel_attached_encoder(connector);
+       struct intel_crt *crt = intel_attached_crt(connector);
        struct drm_crtc *crtc;
        int dpms_mode;
        enum drm_connector_status status;
@@ -447,24 +456,25 @@ intel_crt_detect(struct drm_connector *connector, bool force)
                        return connector_status_disconnected;
        }
 
-       if (intel_crt_detect_ddc(&encoder->base))
+       if (intel_crt_detect_ddc(crt))
                return connector_status_connected;
 
        if (!force)
                return connector->status;
 
        /* for pre-945g platforms use load detect */
-       if (encoder->base.crtc && encoder->base.crtc->enabled) {
-               status = intel_crt_load_detect(encoder->base.crtc, encoder);
+       crtc = crt->base.base.crtc;
+       if (crtc && crtc->enabled) {
+               status = intel_crt_load_detect(crtc, crt);
        } else {
-               crtc = intel_get_load_detect_pipe(encoder, connector,
+               crtc = intel_get_load_detect_pipe(&crt->base, connector,
                                                  NULL, &dpms_mode);
                if (crtc) {
-                       if (intel_crt_detect_ddc(&encoder->base))
+                       if (intel_crt_detect_ddc(crt))
                                status = connector_status_connected;
                        else
-                               status = intel_crt_load_detect(crtc, encoder);
-                       intel_release_load_detect_pipe(encoder,
+                               status = intel_crt_load_detect(crtc, crt);
+                       intel_release_load_detect_pipe(&crt->base,
                                                       connector, dpms_mode);
                } else
                        status = connector_status_unknown;
@@ -536,17 +546,17 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 void intel_crt_init(struct drm_device *dev)
 {
        struct drm_connector *connector;
-       struct intel_encoder *intel_encoder;
+       struct intel_crt *crt;
        struct intel_connector *intel_connector;
        struct drm_i915_private *dev_priv = dev->dev_private;
 
-       intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
-       if (!intel_encoder)
+       crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+       if (!crt)
                return;
 
        intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
        if (!intel_connector) {
-               kfree(intel_encoder);
+               kfree(crt);
                return;
        }
 
@@ -554,20 +564,20 @@ void intel_crt_init(struct drm_device *dev)
        drm_connector_init(dev, &intel_connector->base,
                           &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
-       drm_encoder_init(dev, &intel_encoder->base, &intel_crt_enc_funcs,
+       drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
                         DRM_MODE_ENCODER_DAC);
 
-       intel_connector_attach_encoder(intel_connector, intel_encoder);
+       intel_connector_attach_encoder(intel_connector, &crt->base);
 
-       intel_encoder->type = INTEL_OUTPUT_ANALOG;
-       intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
-                                  (1 << INTEL_ANALOG_CLONE_BIT) |
-                                  (1 << INTEL_SDVO_LVDS_CLONE_BIT);
-       intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+       crt->base.type = INTEL_OUTPUT_ANALOG;
+       crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+                               1 << INTEL_ANALOG_CLONE_BIT |
+                               1 << INTEL_SDVO_LVDS_CLONE_BIT);
+       crt->base.crtc_mask = (1 << 0) | (1 << 1);
        connector->interlace_allowed = 1;
        connector->doublescan_allowed = 0;
 
-       drm_encoder_helper_add(&intel_encoder->base, &intel_crt_helper_funcs);
+       drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
        drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
        drm_sysfs_connector_add(connector);