# Patch managed by http://www.holgerschurig.de/patcher.html
#
---- /dev/null
-+++ linux-2.6.12/Documentation/fb/elpp.txt
+Index: linux-2.6.12/Documentation/fb/elpp.txt
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.12/Documentation/fb/elpp.txt 2005-07-24 18:21:08.000000000 +0100
@@ -0,0 +1,181 @@
+
+ ELPP, The Enhanced Linux Progress Patch v1.0
+ -----------------------------------------
+ Comments, queries and changes welcome at:
+ Matthias Kunze <elpp at foofighter.de>
---- linux-2.6.12/drivers/video/Kconfig~add-elpp-stuff.patch
-+++ linux-2.6.12/drivers/video/Kconfig
+Index: linux-2.6.12/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.12.orig/drivers/video/Kconfig 2005-07-24 18:20:46.000000000 +0100
++++ linux-2.6.12/drivers/video/Kconfig 2005-07-24 18:21:08.000000000 +0100
@@ -108,6 +108,11 @@
This is particularly important to one driver, matroxfb. If
unsure, say N.
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
---- linux-2.6.12/drivers/video/console/Makefile~add-elpp-stuff.patch
-+++ linux-2.6.12/drivers/video/console/Makefile
+Index: linux-2.6.12/drivers/video/console/Makefile
+===================================================================
+--- linux-2.6.12.orig/drivers/video/console/Makefile 2005-07-24 18:20:21.000000000 +0100
++++ linux-2.6.12/drivers/video/console/Makefile 2005-07-24 18:21:08.000000000 +0100
@@ -31,6 +31,8 @@
obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += tileblit.o
endif
obj-$(CONFIG_FB_STI) += sticore.o font.o
# Targets that kbuild needs to know about
---- /dev/null
-+++ linux-2.6.12/drivers/video/console/elpp.c
+Index: linux-2.6.12/drivers/video/console/elpp.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.12/drivers/video/console/elpp.c 2005-07-24 18:21:08.000000000 +0100
@@ -0,0 +1,685 @@
+
+/*
+ return -1;
+}
+
---- linux-2.6.12/drivers/video/console/fbcon.c~add-elpp-stuff.patch
-+++ linux-2.6.12/drivers/video/console/fbcon.c
+Index: linux-2.6.12/drivers/video/console/fbcon.c
+===================================================================
+--- linux-2.6.12.orig/drivers/video/console/fbcon.c 2005-07-24 18:20:21.000000000 +0100
++++ linux-2.6.12/drivers/video/console/fbcon.c 2005-07-24 18:21:08.000000000 +0100
@@ -91,6 +91,9 @@
#include <asm/machdep.h>
#include <asm/setup.h>
static signed char con2fb_map_boot[MAX_NR_CONSOLES];
static int logo_height;
static int logo_lines;
-@@ -1002,6 +1005,19 @@
+@@ -996,6 +999,19 @@
softback_top = 0;
}
}
}
static void fbcon_deinit(struct vc_data *vc)
-@@ -2002,6 +2018,12 @@
+@@ -1996,6 +2012,12 @@
logo_shown = fg_console;
/* This is protected above by initmem_freed */
fb_show_logo(info);
update_region(vc,
vc->vc_origin + vc->vc_size_row * vc->vc_top,
vc->vc_size_row * (vc->vc_bottom -
---- /dev/null
-+++ linux-2.6.12/drivers/video/console/symbols_16x16.c
+Index: linux-2.6.12/drivers/video/console/symbols_16x16.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.12/drivers/video/console/symbols_16x16.c 2005-07-24 18:21:08.000000000 +0100
@@ -0,0 +1,123 @@
+
+#include <linux/font.h>
+ 0
+};
+
---- linux-2.6.12/drivers/video/fbmem.c~add-elpp-stuff.patch
-+++ linux-2.6.12/drivers/video/fbmem.c
+Index: linux-2.6.12/drivers/video/fbmem.c
+===================================================================
+--- linux-2.6.12.orig/drivers/video/fbmem.c 2005-07-24 18:20:37.000000000 +0100
++++ linux-2.6.12/drivers/video/fbmem.c 2005-07-24 18:21:08.000000000 +0100
@@ -360,7 +360,13 @@
fb_logo.depth = 4;
else
info->fbops->fb_imageblit(info, &image);
}
---- linux-2.6.12/drivers/video/logo/Makefile~add-elpp-stuff.patch
-+++ linux-2.6.12/drivers/video/logo/Makefile
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_superh_mono.o
+Index: linux-2.6.12/drivers/video/logo/Makefile
+===================================================================
+--- linux-2.6.12.orig/drivers/video/logo/Makefile 2005-07-24 18:20:21.000000000 +0100
++++ linux-2.6.12/drivers/video/logo/Makefile 2005-07-24 18:22:21.000000000 +0100
+@@ -13,6 +13,7 @@
obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
+ obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o
+obj-$(CONFIG_FB_ELPP) += logo_linux_elpp.o
# How to generate logo's
---- linux-2.6.12/drivers/video/logo/logo.c~add-elpp-stuff.patch
-+++ linux-2.6.12/drivers/video/logo/logo.c
+Index: linux-2.6.12/drivers/video/logo/logo.c
+===================================================================
+--- linux-2.6.12.orig/drivers/video/logo/logo.c 2005-07-24 18:20:21.000000000 +0100
++++ linux-2.6.12/drivers/video/logo/logo.c 2005-07-24 18:23:04.000000000 +0100
@@ -14,6 +14,10 @@
#include <linux/stddef.h>
#include <linux/module.h>
#ifdef CONFIG_M68K
#include <asm/setup.h>
#endif
-@@ -33,6 +37,8 @@
- extern const struct linux_logo logo_superh_mono;
+@@ -34,6 +38,8 @@
extern const struct linux_logo logo_superh_vga16;
extern const struct linux_logo logo_superh_clut224;
+ extern const struct linux_logo logo_m32r_clut224;
+extern const struct linux_logo logo_linux_elpp;
+extern struct elpp_struct elpp;
const struct linux_logo *fb_find_logo(int depth)
-@@ -97,6 +103,12 @@
- /* SuperH Linux logo */
- logo = &logo_superh_clut224;
+@@ -102,6 +108,12 @@
+ /* M32R Linux logo */
+ logo = &logo_m32r_clut224;
#endif
+#ifdef CONFIG_FB_ELPP
+ if( elpp.logo != (void*)0)
}
return logo;
}
---- /dev/null
-+++ linux-2.6.12/drivers/video/logo/logo_linux_elpp.c
+Index: linux-2.6.12/drivers/video/logo/logo_linux_elpp.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.12/drivers/video/logo/logo_linux_elpp.c 2005-07-24 18:21:08.000000000 +0100
@@ -0,0 +1,25669 @@
+/*
+ * DO NOT EDIT THIS FILE!
+ .data = logo_linux_elpp_data
+};
+
---- /dev/null
-+++ linux-2.6.12/include/linux/elpp.h
+Index: linux-2.6.12/include/linux/elpp.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.12/include/linux/elpp.h 2005-07-24 18:21:08.000000000 +0100
@@ -0,0 +1,96 @@
+
+/*
+extern struct elpp_struct elpp;
+
+#endif
---- linux-2.6.12/init/main.c~add-elpp-stuff.patch
-+++ linux-2.6.12/init/main.c
-@@ -107,6 +107,12 @@
+Index: linux-2.6.12/init/main.c
+===================================================================
+--- linux-2.6.12.orig/init/main.c 2005-07-24 18:20:41.000000000 +0100
++++ linux-2.6.12/init/main.c 2005-07-24 18:21:08.000000000 +0100
+@@ -108,6 +108,12 @@
enum system_states system_state;
EXPORT_SYMBOL(system_state);
/*
* Boot command-line arguments
*/
-@@ -521,6 +527,9 @@
+@@ -523,6 +529,9 @@
signals_init();
/* rootfs populating might need page-writeback */
page_writeback_init();
#ifdef CONFIG_PROC_FS
proc_root_init();
#endif
-@@ -562,7 +571,7 @@
+@@ -564,7 +573,7 @@
}
(*call)();
msg = NULL;
if (preempt_count() != count) {
msg = "preemption imbalance";
-@@ -629,6 +638,13 @@
+@@ -631,6 +640,13 @@
#ifdef CONFIG_SMP
int i;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-mm1
-# Tue Jun 21 19:04:43 2005
+# Linux kernel version: 2.6.13-rc3-mm1
+# Sun Jul 24 18:32:14 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# Class Based Kernel Resource Management
+#
+# CONFIG_CKRM is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
+# CONFIG_DELAY_ACCT is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
#
# Intel PXA2xx Implementations
#
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_APM=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_MARK is not set
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
#
# PCMCIA character devices
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_SENSOR is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# Video Adapters
#
-# CONFIG_CONFIG_TUNER_MULTI_I2C is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CORGI=y
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+CONFIG_SPEAKUP_DEFAULT="none"
+
#
# Sound
#
CONFIG_USB_MTOUCH=m
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_AX8817X=y
# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
#
# USB port drivers
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
#KV = "${@bb.data.getVar('PV',d,True).split('-')[0]}"
KV = "${@bb.data.getVar('PV',d,True)}"
-PR = "r6"
+PR = "r0"
DOSRC = "http://www.do13.in-berlin.de/openzaurus/patches"
RPSRC = "http://www.rpsys.net/openzaurus/patches"
# http://www.kernel.org/pub/linux/kernel/v2.6/snapshots/patch-2.6.12-rc4-git1.bz2;patch=1 \
# ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.12-rc6.bz2;patch=1 \
-
-# ${RPSRC}/corgi_kbd1-r1.patch;patch=1 \
-# ${RPSRC}/sharpsl_mapprom-r1.patch;patch=1 \
+# ${RPSRC}/rmk_devbuff-r0.patch;patch=1 \
# Patches submitted upstream are towards top of this list
SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.12.tar.gz \
- ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12/2.6.12-mm1/2.6.12-mm1.bz2;patch=1 \
- ${RPSRC}/machtype_update-r1.patch;patch=1 \
- ${RPSRC}/collie_typofix-r0.patch;patch=1 \
- ${RPSRC}/rmk_armsmp_fix-r0.patch;patch=1 \
- ${RPSRC}/corgi_tspmu-r1.patch;patch=1 \
- ${RPSRC}/oprofile_trace-r3.patch;patch=1 \
+ ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.13-rc3.bz2;patch=1 \
+ ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13-rc3/2.6.13-rc3-mm1/2.6.13-rc3-mm1.bz2;patch=1 \
+ ${RPSRC}/corgi_tspmu-r2.patch;patch=1 \
${RPSRC}/preempt_nwfpe-r0.patch;patch=1 \
+ ${RPSRC}/preempt_nwfpe1-r0.patch;patch=1 \
${RPSRC}/w100_core-r0.patch;patch=1 \
${RPSRC}/w100_corgi-r0.patch;patch=1 \
${RPSRC}/corgi_kbd3-r6.patch;patch=1 \
- ${RPSRC}/corgi_kbd_susres-r0.patch;patch=1 \
+ ${RPSRC}/corgi_kbd_susres-r1.patch;patch=1 \
${RPSRC}/pxa_rtc-r1.patch;patch=1 \
${RPSRC}/pxa_irda-r2.patch;patch=1 \
${RPSRC}/sharp_multi_pcmcia-r2.patch;patch=1 \
${DOSRC}/pxa-i2c-func-r0.patch;patch=1 \
${RPSRC}/mmc_timeout-r0.patch;patch=1 \
${RPSRC}/spitz_mtd-r0.patch;patch=1 \
- ${RPSRC}/ipaq/hx2750_base-r17.patch;patch=1 \
+ ${RPSRC}/ipaq/hx2750_base-r19.patch;patch=1 \
${RPSRC}/ipaq/hx2750_bl-r0.patch;patch=1 \
- ${RPSRC}/ipaq/hx2750_pcmcia-r0.patch;patch=1 \
- ${RPSRC}/ipaq/pxa_keys-r0.patch;patch=1 \
+ ${RPSRC}/ipaq/hx2750_pcmcia-r1.patch;patch=1 \
+ ${RPSRC}/ipaq/pxa_keys-r1.patch;patch=1 \
${RPSRC}/ipaq/tsc2101-r7.patch;patch=1 \
+ ${RPSRC}/ipaq/hx2750_test1-r1.patch;patch=1 \
${DOSRC}/tosa-detection-r0.patch;patch=1 \
${BASRC}/spitz-detection-r0.patch;patch=1 \
${DOSRC}/pxa2xx-ir-dma-r0.patch;patch=1 \
${DOSRC}/tc6393-device-r4.patch;patch=1 \
- ${DOSRC}/tc6393_nand-r5.patch;patch=1 \
+ ${DOSRC}/tc6393_nand-r6.patch;patch=1 \
${DOSRC}/tosa-machine-base-r6.patch;patch=1 \
- ${DOSRC}/tosa-keyboard-r5.patch;patch=1 \
+ ${DOSRC}/tosa-keyboard-r6.patch;patch=1 \
${DOSRC}/tc6393fb-r6.patch;patch=1 \
${DOSRC}/tosa-power-r5.patch;patch=1 \
${DOSRC}/tosa-mmc-r3.patch;patch=1 \
${DOSRC}/tosa-udc-r3.patch;patch=1 \
${DOSRC}/tosa-irda-r2.patch;patch=1 \
- ${DOSRC}/tosa-lcd-r2.patch;patch=1 \
+ ${DOSRC}/tosa-lcd-r3.patch;patch=1 \
${DOSRC}/tosa-bl-r4.patch;patch=1 \
${JLSRC}/zaurus-local-2.6.11.diff.gz;patch=1 \
file://add-oz-release-string.patch;patch=1 \
git.openpandora.org / openembedded.git / commitdiff