be2net: Fix initialization sequence for Lancer
authorPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Thu, 12 Jul 2012 03:56:58 +0000 (03:56 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 12 Jul 2012 15:16:46 +0000 (08:16 -0700)
Invoke only required initialization routines for Lancer.
Remove invocation of unnecessary routines.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/emulex/benet/be_cmds.c
drivers/net/ethernet/emulex/benet/be_cmds.h
drivers/net/ethernet/emulex/benet/be_main.c

index d75c9fb..431f774 100644 (file)
@@ -426,12 +426,65 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
                return 0;
 }
 
-int be_cmd_POST(struct be_adapter *adapter)
+int lancer_wait_ready(struct be_adapter *adapter)
+{
+#define SLIPORT_READY_TIMEOUT 30
+       u32 sliport_status;
+       int status = 0, i;
+
+       for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
+               sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
+               if (sliport_status & SLIPORT_STATUS_RDY_MASK)
+                       break;
+
+               msleep(1000);
+       }
+
+       if (i == SLIPORT_READY_TIMEOUT)
+               status = -1;
+
+       return status;
+}
+
+int lancer_test_and_set_rdy_state(struct be_adapter *adapter)
+{
+       int status;
+       u32 sliport_status, err, reset_needed;
+       status = lancer_wait_ready(adapter);
+       if (!status) {
+               sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
+               err = sliport_status & SLIPORT_STATUS_ERR_MASK;
+               reset_needed = sliport_status & SLIPORT_STATUS_RN_MASK;
+               if (err && reset_needed) {
+                       iowrite32(SLI_PORT_CONTROL_IP_MASK,
+                                 adapter->db + SLIPORT_CONTROL_OFFSET);
+
+                       /* check adapter has corrected the error */
+                       status = lancer_wait_ready(adapter);
+                       sliport_status = ioread32(adapter->db +
+                                                 SLIPORT_STATUS_OFFSET);
+                       sliport_status &= (SLIPORT_STATUS_ERR_MASK |
+                                               SLIPORT_STATUS_RN_MASK);
+                       if (status || sliport_status)
+                               status = -1;
+               } else if (err || reset_needed) {
+                       status = -1;
+               }
+       }
+       return status;
+}
+
+int be_fw_wait_ready(struct be_adapter *adapter)
 {
        u16 stage;
        int status, timeout = 0;
        struct device *dev = &adapter->pdev->dev;
 
+       if (lancer_chip(adapter)) {
+               status = lancer_wait_ready(adapter);
+               return status;
+       }
+
        do {
                status = be_POST_stage_get(adapter, &stage);
                if (status) {
@@ -562,6 +615,9 @@ int be_cmd_fw_init(struct be_adapter *adapter)
        u8 *wrb;
        int status;
 
+       if (lancer_chip(adapter))
+               return 0;
+
        if (mutex_lock_interruptible(&adapter->mbox_lock))
                return -1;
 
@@ -589,6 +645,9 @@ int be_cmd_fw_clean(struct be_adapter *adapter)
        u8 *wrb;
        int status;
 
+       if (lancer_chip(adapter))
+               return 0;
+
        if (mutex_lock_interruptible(&adapter->mbox_lock))
                return -1;
 
@@ -607,6 +666,7 @@ int be_cmd_fw_clean(struct be_adapter *adapter)
        mutex_unlock(&adapter->mbox_lock);
        return status;
 }
+
 int be_cmd_eq_create(struct be_adapter *adapter,
                struct be_queue_info *eq, int eq_delay)
 {
@@ -1682,6 +1742,20 @@ int be_cmd_reset_function(struct be_adapter *adapter)
        struct be_cmd_req_hdr *req;
        int status;
 
+       if (lancer_chip(adapter)) {
+               status = lancer_wait_ready(adapter);
+               if (!status) {
+                       iowrite32(SLI_PORT_CONTROL_IP_MASK,
+                                 adapter->db + SLIPORT_CONTROL_OFFSET);
+                       status = lancer_test_and_set_rdy_state(adapter);
+               }
+               if (status) {
+                       dev_err(&adapter->pdev->dev,
+                               "Adapter in non recoverable error\n");
+               }
+               return status;
+       }
+
        if (mutex_lock_interruptible(&adapter->mbox_lock))
                return -1;
 
index 3c938f5..cfc0620 100644 (file)
@@ -1656,7 +1656,7 @@ struct be_cmd_req_set_ext_fat_caps {
 };
 
 extern int be_pci_fnum_get(struct be_adapter *adapter);
-extern int be_cmd_POST(struct be_adapter *adapter);
+extern int be_fw_wait_ready(struct be_adapter *adapter);
 extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
                        u8 type, bool permanent, u32 if_handle, u32 pmac_id);
 extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
@@ -1765,4 +1765,6 @@ extern int be_cmd_get_ext_fat_capabilites(struct be_adapter *adapter,
 extern int be_cmd_set_ext_fat_capabilites(struct be_adapter *adapter,
                                          struct be_dma_mem *cmd,
                                          struct be_fat_conf_params *cfgs);
+extern int lancer_wait_ready(struct be_adapter *adapter);
+extern int lancer_test_and_set_rdy_state(struct be_adapter *adapter);
 
index 2436c3a..a3641ba 100644 (file)
@@ -2573,9 +2573,6 @@ static int be_clear(struct be_adapter *adapter)
        be_tx_queues_destroy(adapter);
        be_evt_queues_destroy(adapter);
 
-       /* tell fw we're done with firing cmds */
-       be_cmd_fw_clean(adapter);
-
        be_msix_disable(adapter);
        return 0;
 }
@@ -3476,6 +3473,9 @@ static void __devexit be_remove(struct pci_dev *pdev)
 
        be_clear(adapter);
 
+       /* tell fw we're done with firing cmds */
+       be_cmd_fw_clean(adapter);
+
        be_stats_cleanup(adapter);
 
        be_ctrl_cleanup(adapter);
@@ -3625,54 +3625,6 @@ static int be_dev_type_check(struct be_adapter *adapter)
        return 0;
 }
 
-static int lancer_wait_ready(struct be_adapter *adapter)
-{
-#define SLIPORT_READY_TIMEOUT 30
-       u32 sliport_status;
-       int status = 0, i;
-
-       for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
-               sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
-               if (sliport_status & SLIPORT_STATUS_RDY_MASK)
-                       break;
-
-               msleep(1000);
-       }
-
-       if (i == SLIPORT_READY_TIMEOUT)
-               status = -1;
-
-       return status;
-}
-
-static int lancer_test_and_set_rdy_state(struct be_adapter *adapter)
-{
-       int status;
-       u32 sliport_status, err, reset_needed;
-       status = lancer_wait_ready(adapter);
-       if (!status) {
-               sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
-               err = sliport_status & SLIPORT_STATUS_ERR_MASK;
-               reset_needed = sliport_status & SLIPORT_STATUS_RN_MASK;
-               if (err && reset_needed) {
-                       iowrite32(SLI_PORT_CONTROL_IP_MASK,
-                                       adapter->db + SLIPORT_CONTROL_OFFSET);
-
-                       /* check adapter has corrected the error */
-                       status = lancer_wait_ready(adapter);
-                       sliport_status = ioread32(adapter->db +
-                                                       SLIPORT_STATUS_OFFSET);
-                       sliport_status &= (SLIPORT_STATUS_ERR_MASK |
-                                               SLIPORT_STATUS_RN_MASK);
-                       if (status || sliport_status)
-                               status = -1;
-               } else if (err || reset_needed) {
-                       status = -1;
-               }
-       }
-       return status;
-}
-
 static void lancer_test_and_recover_fn_err(struct be_adapter *adapter)
 {
        int status;
@@ -3820,22 +3772,9 @@ static int __devinit be_probe(struct pci_dev *pdev,
        if (status)
                goto free_netdev;
 
-       if (lancer_chip(adapter)) {
-               status = lancer_wait_ready(adapter);
-               if (!status) {
-                       iowrite32(SLI_PORT_CONTROL_IP_MASK,
-                                       adapter->db + SLIPORT_CONTROL_OFFSET);
-                       status = lancer_test_and_set_rdy_state(adapter);
-               }
-               if (status) {
-                       dev_err(&pdev->dev, "Adapter in non recoverable error\n");
-                       goto ctrl_clean;
-               }
-       }
-
        /* sync up with fw's ready state */
        if (be_physfn(adapter)) {
-               status = be_cmd_POST(adapter);
+               status = be_fw_wait_ready(adapter);
                if (status)
                        goto ctrl_clean;
        }
@@ -4033,7 +3972,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
        pci_restore_state(pdev);
 
        /* Check if card is ok and fw is ready */
-       status = be_cmd_POST(adapter);
+       status = be_fw_wait_ready(adapter);
        if (status)
                return PCI_ERS_RESULT_DISCONNECT;
 
@@ -4055,6 +3994,10 @@ static void be_eeh_resume(struct pci_dev *pdev)
        if (status)
                goto err;
 
+       status = be_cmd_reset_function(adapter);
+       if (status)
+               goto err;
+
        status = be_setup(adapter);
        if (status)
                goto err;