Merge with /home/wd/git/u-boot/custodian/u-boot-mpc5xxx

diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 45bcd4b..5fe3af9 100644 (file)
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -126,6 +126,9 @@ tlbtab:
        /* TLB-entry for peripherals */
        tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
 
+       /* TLB-entry PCI IO Space - from sr@denx.de */
+       tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
        tlbtab_end
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)

diff --git a/drivers/Makefile b/drivers/Makefile
index 3ee6312..6bf05cc 100755 (executable)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -43,7 +43,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \
          sed13806.o sed156x.o \
          serial.o serial_max3100.o \
          serial_pl010.o serial_pl011.o serial_xuartlite.o \
-         sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
+         sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
          status_led.o sym53c8xx.o systemace.o ahci.o \
          ti_pci1410a.o tigon3.o tsec.o \
          tsi108_eth.o tsi108_i2c.o tsi108_pci.o \

diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 2378553..acfda83 100644 (file)
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -28,6 +28,11 @@
 
 #define        PCIAUTO_IDE_MODE_MASK           0x05
 
+/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */
+#ifndef CFG_PCI_CACHE_LINE_SIZE
+#define CFG_PCI_CACHE_LINE_SIZE        8
+#endif
+
 /*
  *
  */
@@ -150,7 +155,8 @@ void pciauto_setup_device(struct pci_controller *hose,
        }
 
        pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
-       pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+       pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
+               CFG_PCI_CACHE_LINE_SIZE);
        pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 }
 

diff --git a/drivers/sil680.c b/drivers/sil680.c
new file mode 100644 (file)
index 0000000..a6143df
--- /dev/null
+++ b/drivers/sil680.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2007
+ * Gary Jennejohn, DENX Software Engineering, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* sil680.c - ide support functions for the Sil0680A controller */
+
+/*
+ * The following parameters must be defined in the configuration file
+ * of the target board:
+ *
+ * #define CFG_IDE_SIL680
+ *
+ * #define CONFIG_PCI_PNP
+ * NOTE it may also be necessary to define this if the default of 8 is
+ * incorrect for the target board (e.g. the sequoia board requires 0).
+ * #define CFG_PCI_CACHE_LINE_SIZE     0
+ *
+ * #define CONFIG_CMD_IDE
+ * #undef  CONFIG_IDE_8xx_DIRECT
+ * #undef  CONFIG_IDE_LED
+ * #undef  CONFIG_IDE_RESET
+ * #define CONFIG_IDE_PREINIT
+ * #define CFG_IDE_MAXBUS              2 - modify to suit
+ * #define CFG_IDE_MAXDEVICE   (CFG_IDE_MAXBUS*2) - modify to suit
+ * #define CFG_ATA_BASE_ADDR   0
+ * #define CFG_ATA_IDE0_OFFSET 0
+ * #define CFG_ATA_IDE1_OFFSET 0
+ * #define CFG_ATA_DATA_OFFSET 0
+ * #define CFG_ATA_REG_OFFSET  0
+ * #define CFG_ATA_ALT_OFFSET  0x0004
+ *
+ * The mapping for PCI IO-space.
+ * NOTE this is the value for the sequoia board. Modify to suit.
+ * #define CFG_PCI0_IO_SPACE   0xE8000000
+ */
+
+#include <common.h>
+#if defined(CFG_IDE_SIL680)
+#include <ata.h>
+#include <ide.h>
+#include <pci.h>
+
+extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+
+int ide_preinit (void)
+{
+       int status;
+       pci_dev_t devbusfn;
+       int l;
+
+       status = 1;
+       for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+               ide_bus_offset[l] = -ATA_STATUS;
+       }
+       devbusfn = pci_find_device (0x1095, 0x0680, 0);
+       if (devbusfn != -1) {
+               status = 0;
+
+               pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
+                                      (u32 *) &ide_bus_offset[0]);
+               ide_bus_offset[0] &= 0xfffffff8;
+               ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+               pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
+                                      (u32 *) &ide_bus_offset[1]);
+               ide_bus_offset[1] &= 0xfffffff8;
+               ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+               /* init various things - taken from the Linux driver */
+               /* set PIO mode */
+               pci_write_config_byte(devbusfn, 0x80, 0x00);
+               pci_write_config_byte(devbusfn, 0x84, 0x00);
+               /* IDE0 */
+               pci_write_config_byte(devbusfn,  0xA1, 0x02);
+               pci_write_config_word(devbusfn,  0xA2, 0x328A);
+               pci_write_config_dword(devbusfn, 0xA4, 0x62DD62DD);
+               pci_write_config_dword(devbusfn, 0xA8, 0x43924392);
+               pci_write_config_dword(devbusfn, 0xAC, 0x40094009);
+               /* IDE1 */
+               pci_write_config_byte(devbusfn,  0xB1, 0x02);
+               pci_write_config_word(devbusfn,  0xB2, 0x328A);
+               pci_write_config_dword(devbusfn, 0xB4, 0x62DD62DD);
+               pci_write_config_dword(devbusfn, 0xB8, 0x43924392);
+               pci_write_config_dword(devbusfn, 0xBC, 0x40094009);
+       }
+       return (status);
+}
+
+void ide_set_reset (int flag) {
+       return;
+}
+
+#endif /* CFG_IDE_SIL680 */

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 824a812..c2e1386 100644 (file)
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -400,7 +400,8 @@
  *----------------------------------------------------------------------*/
 /* General PCI */
 #define CONFIG_PCI                     /* include pci support          */
-#undef CONFIG_PCI_PNP                  /* do (not) pci plug-and-play   */
+#define CONFIG_PCI_PNP                 /* do pci plug-and-play   */
+#define CFG_PCI_CACHE_LINE_SIZE        0 /* to avoid problems with PNP */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
 #define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/