bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select CLKDEV_LOOKUP
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
/* irq0 .. irq2 */
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The five programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&hck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at572d940hf_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
platform_device_register(&at572d940hf_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
platform_device_register(&at572d940hf_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
platform_device_register(&at572d940hf_tcb_device);
}
#else
case 0: /* DBGU */
pdev = &at572d940hf_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US0:
pdev = &at572d940hf_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US1:
pdev = &at572d940hf_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT572D940HF_ID_US2:
pdev = &at572d940hf_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at572d940hf_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq1
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91cap9_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
/* Pullup pin is handled internally by USB device peripheral */
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
platform_device_register(&at91_usba_udc_device);
}
#else
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc0_device);
} else { /* MCI1 */
/* CLK */
}
mmc1_data = *data;
- at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc1_device);
}
}
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
platform_device_register(&at91cap9_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
platform_device_register(&at91cap9_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has one clock and irq for all three TC channels */
- at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
platform_device_register(&at91cap9_tcb_device);
}
#else
case AT91CAP9_ID_SSC0:
pdev = &at91cap9_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91CAP9_ID_SSC1:
pdev = &at91cap9_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91cap9_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US0:
pdev = &at91cap9_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US1:
pdev = &at91cap9_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US2:
pdev = &at91cap9_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91cap9_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq6
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91rm9200_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb0_device);
-
- at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
- at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
- at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb1_device);
}
#else
case AT91RM9200_ID_SSC0:
pdev = &at91rm9200_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC1:
pdev = &at91rm9200_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC2:
pdev = &at91rm9200_ssc2_device;
configure_ssc2_pins(pins);
- at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91rm9200_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US0:
pdev = &at91rm9200_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US1:
pdev = &at91rm9200_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US2:
pdev = &at91rm9200_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US3:
pdev = &at91rm9200_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91rm9200_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq2
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+ CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
+};
+
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9260_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9260_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9260_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
platform_device_register(&at91sam9260_tcb0_device);
-
- at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
- at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
- at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
platform_device_register(&at91sam9260_tcb1_device);
}
#else
case AT91SAM9260_ID_SSC:
pdev = &at91sam9260_ssc_device;
configure_ssc_pins(pins);
- at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91sam9260_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US0:
pdev = &at91sam9260_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US1:
pdev = &at91sam9260_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US2:
pdev = &at91sam9260_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US3:
pdev = &at91sam9260_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US4:
pdev = &at91sam9260_uart4_device;
configure_usart4_pins();
- at91_clock_associate("usart4_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US5:
pdev = &at91sam9260_uart5_device;
configure_usart5_pins();
- at91_clock_associate("usart5_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9260_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq2
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&hck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9261_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9261_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9261_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
platform_device_register(&at91sam9261_tcb_device);
}
#else
case AT91SAM9261_ID_SSC0:
pdev = &at91sam9261_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9261_ID_SSC1:
pdev = &at91sam9261_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
case AT91SAM9261_ID_SSC2:
pdev = &at91sam9261_ssc2_device;
configure_ssc2_pins(pins);
- at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91sam9261_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9261_ID_US0:
pdev = &at91sam9261_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9261_ID_US1:
pdev = &at91sam9261_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9261_ID_US2:
pdev = &at91sam9261_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9261_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq1
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9263_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
platform_device_register(&at91sam9263_mmc0_device);
} else { /* MCI1 */
/* CLK */
}
mmc1_data = *data;
- at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
platform_device_register(&at91sam9263_mmc1_device);
}
}
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9263_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9263_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has one clock and irq for all three TC channels */
- at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
platform_device_register(&at91sam9263_tcb_device);
}
#else
case AT91SAM9263_ID_SSC0:
pdev = &at91sam9263_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9263_ID_SSC1:
pdev = &at91sam9263_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91sam9263_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9263_ID_US0:
pdev = &at91sam9263_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9263_ID_US1:
pdev = &at91sam9263_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9263_ID_US2:
pdev = &at91sam9263_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9263_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
.type = CLK_TYPE_PERIPHERAL,
};
-/* One additional fake clock for ohci */
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 0,
- .type = CLK_TYPE_PERIPHERAL,
- .parent = &uhphs_clk,
-};
-
-/* One additional fake clock for second TC block */
-static struct clk tcb1_clk = {
- .name = "tcb1_clk",
- .pmc_mask = 0,
- .type = CLK_TYPE_PERIPHERAL,
- .parent = &tcb0_clk,
-};
-
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&udphs_clk,
&mmc1_clk,
// irq0
- &ohci_clk,
- &tcb1_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for ohci */
+ CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
clk_register(&vdec_clk);
clk_register(&pck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9g45_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
}
usbh_ehci_data = *data;
- at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
platform_device_register(&at91_usbh_ehci_device);
}
#else
/* Pullup pin is handled internally by USB device peripheral */
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
platform_device_register(&at91_usba_udc_device);
}
#else
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
platform_device_register(&at91sam9g45_mmc0_device);
} else { /* MCI1 */
}
mmc1_data = *data;
- at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
platform_device_register(&at91sam9g45_mmc1_device);
}
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9g45_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9g45_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has one clock and irq for all six TC channels */
- at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb0_device);
- at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb1_device);
}
#else
case AT91SAM9G45_ID_SSC0:
pdev = &at91sam9g45_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9G45_ID_SSC1:
pdev = &at91sam9g45_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91sam9g45_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US0:
pdev = &at91sam9g45_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US1:
pdev = &at91sam9g45_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US2:
pdev = &at91sam9g45_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US3:
pdev = &at91sam9g45_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9g45_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9rl_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
/* Pullup pin is handled internally by USB device peripheral */
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
platform_device_register(&at91_usba_udc_device);
}
#else
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
platform_device_register(&at91sam9rl_tcb_device);
}
#else
case AT91SAM9RL_ID_SSC0:
pdev = &at91sam9rl_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9RL_ID_SSC1:
pdev = &at91sam9rl_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
default:
return;
case 0: /* DBGU */
pdev = &at91sam9rl_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US0:
pdev = &at91sam9rl_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US1:
pdev = &at91sam9rl_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US2:
pdev = &at91sam9rl_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US3:
pdev = &at91sam9rl_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9rl_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
return AT91X40_MASTER_CLOCK;
}
-struct clk *clk_get(struct device *dev, const char *id)
-{
- return NULL;
-}
-
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
.parent = &pllb,
.mode = pmc_sys_mode,
};
-static struct clk utmi_clk = {
+struct clk utmi_clk = {
.name = "utmi_clk",
.parent = &main_clk,
.pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */
* memory, interfaces to on-chip peripherals, the AIC, and sometimes more
* (e.g baud rate generation). It's sourced from one of the primary clocks.
*/
-static struct clk mck = {
+struct clk mck = {
.name = "mck",
.pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */
};
return NULL;
}
-/*
- * Associate a particular clock with a function (eg, "uart") and device.
- * The drivers can then request the same 'function' with several different
- * devices and not care about which clock name to use.
- */
-void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
-{
- struct clk *clk = clk_get(NULL, id);
-
- if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
- return;
-
- clk->function = func;
- clk->dev = dev;
-}
-
-/* clocks cannot be de-registered no refcounting necessary */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *clk;
-
- list_for_each_entry(clk, &clocks, node) {
- if (strcmp(id, clk->name) == 0)
- return clk;
- if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
- return clk;
- }
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
static void __clk_enable(struct clk *clk)
{
if (clk->parent)
/*------------------------------------------------------------------------*/
/* Register a new clock */
+static void __init at91_clk_add(struct clk *clk)
+{
+ list_add_tail(&clk->node, &clocks);
+
+ clk->cl.con_id = clk->name;
+ clk->cl.clk = clk;
+ clkdev_add(&clk->cl);
+}
+
int __init clk_register(struct clk *clk)
{
if (clk_is_peripheral(clk)) {
if (!clk->parent)
clk->parent = &mck;
clk->mode = pmc_periph_mode;
- list_add_tail(&clk->node, &clocks);
}
else if (clk_is_sys(clk)) {
clk->parent = &mck;
clk->mode = pmc_sys_mode;
-
- list_add_tail(&clk->node, &clocks);
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
else if (clk_is_programmable(clk)) {
clk->mode = pmc_sys_mode;
init_programmable_clock(clk);
- list_add_tail(&clk->node, &clocks);
}
#endif
+ at91_clk_add(clk);
+
return 0;
}
-
/*------------------------------------------------------------------------*/
static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
- list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+ at91_clk_add(standard_pmc_clocks[i]);
if (cpu_has_pllb())
- list_add_tail(&pllb.node, &clocks);
+ at91_clk_add(&pllb);
if (cpu_has_uhp())
- list_add_tail(&uhpck.node, &clocks);
+ at91_clk_add(&uhpck);
if (cpu_has_udpfs())
- list_add_tail(&udpck.node, &clocks);
+ at91_clk_add(&udpck);
if (cpu_has_utmi())
- list_add_tail(&utmi_clk.node, &clocks);
+ at91_clk_add(&utmi_clk);
/* MCK and CPU clock are "always on" */
clk_enable(&mck);
* published by the Free Software Foundation.
*/
+#include <linux/clkdev.h>
+
#define CLK_TYPE_PRIMARY 0x1
#define CLK_TYPE_PLL 0x2
#define CLK_TYPE_PROGRAMMABLE 0x4
struct clk {
struct list_head node;
const char *name; /* unique clock name */
- const char *function; /* function of the clock */
- struct device *dev; /* device associated with function */
+ struct clk_lookup cl;
unsigned long rate_hz;
struct clk *parent;
u32 pmc_mask;
extern int __init clk_register(struct clk *clk);
+extern struct clk mck;
+extern struct clk utmi_clk;
+
+#define CLKDEV_CON_ID(_id, _clk) \
+ { \
+ .con_id = _id, \
+ .clk = _clk, \
+ }
+
+#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \
+ { \
+ .con_id = _con_id, \
+ .dev_id = _dev_id, \
+ .clk = _clk, \
+ }
* published by the Free Software Foundation.
*/
+#include <linux/clkdev.h>
+
/* Map io */
extern void __init at91rm9200_map_io(void);
extern void __init at91sam9260_map_io(void);
/* Clocks */
extern int __init at91_clock_init(unsigned long main_clock);
+/*
+ * function to specify the clock of the default console. As we do not
+ * use the device/driver bus, the dev_name is not intialize. So we need
+ * to link the clock to a specific con_id only "usart"
+ */
+extern void __init at91rm9200_set_console_clock(int id);
+extern void __init at91sam9260_set_console_clock(int id);
+extern void __init at91sam9261_set_console_clock(int id);
+extern void __init at91sam9263_set_console_clock(int id);
+extern void __init at91sam9rl_set_console_clock(int id);
+extern void __init at91sam9g45_set_console_clock(int id);
+extern void __init at91cap9_set_console_clock(int id);
+extern void __init at572d940hf_set_console_clock(int id);
struct device;
-extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
/* Power Management */
extern void at91_irq_suspend(void);
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
git.openpandora.org / pandora-kernel.git / commitdiff