ARM: dts: vf610: Add eDMA node

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 107e2c0..e1e1e51 100644 (file)
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -88,6 +88,21 @@
                                arm,tag-latency = <2 2 2>;
                        };
 
+                       edma0: dma-controller@40018000 {
+                               #dma-cells = <2>;
+                               compatible = "fsl,vf610-edma";
+                               reg = <0x40018000 0x2000>,
+                                       <0x40024000 0x1000>,
+                                       <0x40025000 0x1000>;
+                               interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+                                               <0 9 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "edma-tx", "edma-err";
+                               dma-channels = <32>;
+                               clock-names = "dmamux0", "dmamux1";
+                               clocks = <&clks VF610_CLK_DMAMUX0>,
+                                       <&clks VF610_CLK_DMAMUX1>;
+                       };
+
                        uart0: serial@40027000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x40027000 0x1000>;
@@ -263,6 +278,21 @@
                        reg = <0x40080000 0x80000>;
                        ranges;
 
+                       edma1: dma-controller@40098000 {
+                               #dma-cells = <2>;
+                               compatible = "fsl,vf610-edma";
+                               reg = <0x40098000 0x2000>,
+                                       <0x400a1000 0x1000>,
+                                       <0x400a2000 0x1000>;
+                               interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
+                                               <0 11 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "edma-tx", "edma-err";
+                               dma-channels = <32>;
+                               clock-names = "dmamux0", "dmamux1";
+                               clocks = <&clks VF610_CLK_DMAMUX2>,
+                                       <&clks VF610_CLK_DMAMUX3>;
+                       };
+
                        uart4: serial@400a9000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x400a9000 0x1000>;