--- /dev/null
+/*
+ * leds-blinkm.c
+ * (c) Jan-Simon Möller (dl9pf@gmx.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/printk.h>
+#include <linux/pm_runtime.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+
+/* Addresses to scan - BlinkM is on 0x09 by default*/
+static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
+
+static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
+static int blinkm_test_run(struct i2c_client *client);
+
+struct blinkm_led {
+ struct i2c_client *i2c_client;
+ struct led_classdev led_cdev;
+ int id;
+ atomic_t active;
+};
+
+struct blinkm_work {
+ struct blinkm_led *blinkm_led;
+ struct work_struct work;
+};
+
+#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
+#define work_to_blmwork(c) container_of(c, struct blinkm_work, work)
+
+struct blinkm_data {
+ struct i2c_client *i2c_client;
+ struct mutex update_lock;
+ /* used for led class interface */
+ struct blinkm_led blinkm_leds[3];
+ /* used for "blinkm" sysfs interface */
+ u8 red; /* color red */
+ u8 green; /* color green */
+ u8 blue; /* color blue */
+ /* next values to use for transfer */
+ u8 next_red; /* color red */
+ u8 next_green; /* color green */
+ u8 next_blue; /* color blue */
+ /* internal use */
+ u8 args[7]; /* set of args for transmission */
+ u8 i2c_addr; /* i2c addr */
+ u8 fw_ver; /* firmware version */
+ /* used, but not from userspace */
+ u8 hue; /* HSB hue */
+ u8 saturation; /* HSB saturation */
+ u8 brightness; /* HSB brightness */
+ u8 next_hue; /* HSB hue */
+ u8 next_saturation; /* HSB saturation */
+ u8 next_brightness; /* HSB brightness */
+ /* currently unused / todo */
+ u8 fade_speed; /* fade speed 1 - 255 */
+ s8 time_adjust; /* time adjust -128 - 127 */
+ u8 fade:1; /* fade on = 1, off = 0 */
+ u8 rand:1; /* rand fade mode on = 1 */
+ u8 script_id; /* script ID */
+ u8 script_repeats; /* repeats of script */
+ u8 script_startline; /* line to start */
+};
+
+/* Colors */
+#define RED 0
+#define GREEN 1
+#define BLUE 2
+
+/* mapping command names to cmd chars - see datasheet */
+#define BLM_GO_RGB 0
+#define BLM_FADE_RGB 1
+#define BLM_FADE_HSB 2
+#define BLM_FADE_RAND_RGB 3
+#define BLM_FADE_RAND_HSB 4
+#define BLM_PLAY_SCRIPT 5
+#define BLM_STOP_SCRIPT 6
+#define BLM_SET_FADE_SPEED 7
+#define BLM_SET_TIME_ADJ 8
+#define BLM_GET_CUR_RGB 9
+#define BLM_WRITE_SCRIPT_LINE 10
+#define BLM_READ_SCRIPT_LINE 11
+#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */
+#define BLM_SET_ADDR 13
+#define BLM_GET_ADDR 14
+#define BLM_GET_FW_VER 15
+#define BLM_SET_STARTUP_PARAM 16
+
+/* BlinkM Commands
+ * as extracted out of the datasheet:
+ *
+ * cmdchar = command (ascii)
+ * cmdbyte = command in hex
+ * nr_args = number of arguments (to send)
+ * nr_ret = number of return values (to read)
+ * dir = direction (0 = read, 1 = write, 2 = both)
+ *
+ */
+static const struct {
+ char cmdchar;
+ u8 cmdbyte;
+ u8 nr_args;
+ u8 nr_ret;
+ u8 dir:2;
+} blinkm_cmds[17] = {
+ /* cmdchar, cmdbyte, nr_args, nr_ret, dir */
+ { 'n', 0x6e, 3, 0, 1},
+ { 'c', 0x63, 3, 0, 1},
+ { 'h', 0x68, 3, 0, 1},
+ { 'C', 0x43, 3, 0, 1},
+ { 'H', 0x48, 3, 0, 1},
+ { 'p', 0x70, 3, 0, 1},
+ { 'o', 0x6f, 0, 0, 1},
+ { 'f', 0x66, 1, 0, 1},
+ { 't', 0x74, 1, 0, 1},
+ { 'g', 0x67, 0, 3, 0},
+ { 'W', 0x57, 7, 0, 1},
+ { 'R', 0x52, 2, 5, 2},
+ { 'L', 0x4c, 3, 0, 1},
+ { 'A', 0x41, 4, 0, 1},
+ { 'a', 0x61, 0, 1, 0},
+ { 'Z', 0x5a, 0, 1, 0},
+ { 'B', 0x42, 5, 0, 1},
+};
+
+static ssize_t show_color_common(struct device *dev, char *buf, int color)
+{
+ struct i2c_client *client;
+ struct blinkm_data *data;
+ int ret;
+
+ client = to_i2c_client(dev);
+ data = i2c_get_clientdata(client);
+
+ ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
+ if (ret < 0)
+ return ret;
+ switch (color) {
+ case RED:
+ return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
+ break;
+ case GREEN:
+ return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
+ break;
+ case BLUE:
+ return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int store_color_common(struct device *dev, const char *buf, int color)
+{
+ struct i2c_client *client;
+ struct blinkm_data *data;
+ int ret;
+ u8 value;
+
+ client = to_i2c_client(dev);
+ data = i2c_get_clientdata(client);
+
+ ret = kstrtou8(buf, 10, &value);
+ if (ret < 0) {
+ dev_err(dev, "BlinkM: value too large!\n");
+ return ret;
+ }
+
+ switch (color) {
+ case RED:
+ data->next_red = value;
+ break;
+ case GREEN:
+ data->next_green = value;
+ break;
+ case BLUE:
+ data->next_blue = value;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
+ data->next_red, data->next_green, data->next_blue);
+
+ /* if mode ... */
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+ if (ret < 0) {
+ dev_err(dev, "BlinkM: can't set RGB\n");
+ return ret;
+ }
+ return 0;
+}
+
+static ssize_t show_red(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_color_common(dev, buf, RED);
+}
+
+static ssize_t store_red(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ ret = store_color_common(dev, buf, RED);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);
+
+static ssize_t show_green(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_color_common(dev, buf, GREEN);
+}
+
+static ssize_t store_green(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ int ret;
+
+ ret = store_color_common(dev, buf, GREEN);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);
+
+static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_color_common(dev, buf, BLUE);
+}
+
+static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ ret = store_color_common(dev, buf, BLUE);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);
+
+static ssize_t show_test(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE,
+ "#Write into test to start test sequence!#\n");
+}
+
+static ssize_t store_test(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct i2c_client *client;
+ int ret;
+ client = to_i2c_client(dev);
+
+ /*test */
+ ret = blinkm_test_run(client);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);
+
+/* TODO: HSB, fade, timeadj, script ... */
+
+static struct attribute *blinkm_attrs[] = {
+ &dev_attr_red.attr,
+ &dev_attr_green.attr,
+ &dev_attr_blue.attr,
+ &dev_attr_test.attr,
+ NULL,
+};
+
+static struct attribute_group blinkm_group = {
+ .name = "blinkm",
+ .attrs = blinkm_attrs,
+};
+
+static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
+{
+ int result;
+ int i;
+ int arglen = blinkm_cmds[cmd].nr_args;
+ /* write out cmd to blinkm - always / default step */
+ result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
+ if (result < 0)
+ return result;
+ /* no args to write out */
+ if (arglen == 0)
+ return 0;
+
+ for (i = 0; i < arglen; i++) {
+ /* repeat for arglen */
+ result = i2c_smbus_write_byte(client, arg[i]);
+ if (result < 0)
+ return result;
+ }
+ return 0;
+}
+
+static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
+{
+ int result;
+ int i;
+ int retlen = blinkm_cmds[cmd].nr_ret;
+ for (i = 0; i < retlen; i++) {
+ /* repeat for retlen */
+ result = i2c_smbus_read_byte(client);
+ if (result < 0)
+ return result;
+ arg[i] = result;
+ }
+
+ return 0;
+}
+
+static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
+{
+ /* the protocol is simple but non-standard:
+ * e.g. cmd 'g' (= 0x67) for "get device address"
+ * - which defaults to 0x09 - would be the sequence:
+ * a) write 0x67 to the device (byte write)
+ * b) read the value (0x09) back right after (byte read)
+ *
+ * Watch out for "unfinished" sequences (i.e. not enough reads
+ * or writes after a command. It will make the blinkM misbehave.
+ * Sequence is key here.
+ */
+
+ /* args / return are in private data struct */
+ struct blinkm_data *data = i2c_get_clientdata(client);
+
+ /* We start hardware transfers which are not to be
+ * mixed with other commands. Aquire a lock now. */
+ if (mutex_lock_interruptible(&data->update_lock) < 0)
+ return -EAGAIN;
+
+ /* switch cmd - usually write before reads */
+ switch (cmd) {
+ case BLM_FADE_RAND_RGB:
+ case BLM_GO_RGB:
+ case BLM_FADE_RGB:
+ data->args[0] = data->next_red;
+ data->args[1] = data->next_green;
+ data->args[2] = data->next_blue;
+ blinkm_write(client, cmd, data->args);
+ data->red = data->args[0];
+ data->green = data->args[1];
+ data->blue = data->args[2];
+ break;
+ case BLM_FADE_HSB:
+ case BLM_FADE_RAND_HSB:
+ data->args[0] = data->next_hue;
+ data->args[1] = data->next_saturation;
+ data->args[2] = data->next_brightness;
+ blinkm_write(client, cmd, data->args);
+ data->hue = data->next_hue;
+ data->saturation = data->next_saturation;
+ data->brightness = data->next_brightness;
+ break;
+ case BLM_PLAY_SCRIPT:
+ data->args[0] = data->script_id;
+ data->args[1] = data->script_repeats;
+ data->args[2] = data->script_startline;
+ blinkm_write(client, cmd, data->args);
+ break;
+ case BLM_STOP_SCRIPT:
+ blinkm_write(client, cmd, NULL);
+ break;
+ case BLM_GET_CUR_RGB:
+ data->args[0] = data->red;
+ data->args[1] = data->green;
+ data->args[2] = data->blue;
+ blinkm_write(client, cmd, NULL);
+ blinkm_read(client, cmd, data->args);
+ data->red = data->args[0];
+ data->green = data->args[1];
+ data->blue = data->args[2];
+ break;
+ case BLM_GET_ADDR:
+ data->args[0] = data->i2c_addr;
+ blinkm_write(client, cmd, NULL);
+ blinkm_read(client, cmd, data->args);
+ data->i2c_addr = data->args[0];
+ break;
+ case BLM_SET_TIME_ADJ:
+ case BLM_SET_FADE_SPEED:
+ case BLM_READ_SCRIPT_LINE:
+ case BLM_WRITE_SCRIPT_LINE:
+ case BLM_SET_SCRIPT_LR:
+ case BLM_SET_ADDR:
+ case BLM_GET_FW_VER:
+ case BLM_SET_STARTUP_PARAM:
+ dev_err(&client->dev,
+ "BlinkM: cmd %d not implemented yet.\n", cmd);
+ break;
+ default:
+ dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ } /* end switch(cmd) */
+
+ /* transfers done, unlock */
+ mutex_unlock(&data->update_lock);
+ return 0;
+}
+
+static void led_work(struct work_struct *work)
+{
+ int ret;
+ struct blinkm_led *led;
+ struct blinkm_data *data ;
+ struct blinkm_work *blm_work = work_to_blmwork(work);
+
+ led = blm_work->blinkm_led;
+ data = i2c_get_clientdata(led->i2c_client);
+ ret = blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
+ atomic_dec(&led->active);
+ dev_dbg(&led->i2c_client->dev,
+ "# DONE # next_red = %d, next_green = %d,"
+ " next_blue = %d, active = %d\n",
+ data->next_red, data->next_green,
+ data->next_blue, atomic_read(&led->active));
+ kfree(blm_work);
+}
+
+static int blinkm_led_common_set(struct led_classdev *led_cdev,
+ enum led_brightness value, int color)
+{
+ /* led_brightness is 0, 127 or 255 - we just use it here as-is */
+ struct blinkm_led *led = cdev_to_blmled(led_cdev);
+ struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
+ struct blinkm_work *bl_work = kzalloc(sizeof(struct blinkm_work),
+ GFP_ATOMIC);
+
+ switch (color) {
+ case RED:
+ /* bail out if there's no change */
+ if (data->next_red == (u8) value)
+ return 0;
+ /* we assume a quite fast sequence here ([off]->on->off)
+ * think of network led trigger - we cannot blink that fast, so
+ * in case we already have a off->on->off transition queued up,
+ * we refuse to queue up more.
+ * Revisit: fast-changing brightness. */
+ if (atomic_read(&led->active) > 1)
+ return 0;
+ data->next_red = (u8) value;
+ break;
+ case GREEN:
+ /* bail out if there's no change */
+ if (data->next_green == (u8) value)
+ return 0;
+ /* we assume a quite fast sequence here ([off]->on->off)
+ * Revisit: fast-changing brightness. */
+ if (atomic_read(&led->active) > 1)
+ return 0;
+ data->next_green = (u8) value;
+ break;
+ case BLUE:
+ /* bail out if there's no change */
+ if (data->next_blue == (u8) value)
+ return 0;
+ /* we assume a quite fast sequence here ([off]->on->off)
+ * Revisit: fast-changing brightness. */
+ if (atomic_read(&led->active) > 1)
+ return 0;
+ data->next_blue = (u8) value;
+ break;
+
+ default:
+ dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
+ return -EINVAL;
+ }
+
+ atomic_inc(&led->active);
+ dev_dbg(&led->i2c_client->dev,
+ "#TO_SCHED# next_red = %d, next_green = %d,"
+ " next_blue = %d, active = %d\n",
+ data->next_red, data->next_green,
+ data->next_blue, atomic_read(&led->active));
+
+ /* a fresh work _item_ for each change */
+ bl_work->blinkm_led = led;
+ INIT_WORK(&bl_work->work, led_work);
+ /* queue work in own queue for easy sync on exit*/
+ schedule_work(&bl_work->work);
+
+ return 0;
+}
+
+static void blinkm_led_red_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ blinkm_led_common_set(led_cdev, value, RED);
+}
+
+static void blinkm_led_green_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ blinkm_led_common_set(led_cdev, value, GREEN);
+}
+
+static void blinkm_led_blue_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ blinkm_led_common_set(led_cdev, value, BLUE);
+}
+
+static void blinkm_init_hw(struct i2c_client *client)
+{
+ int ret;
+ ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+}
+
+static int blinkm_test_run(struct i2c_client *client)
+{
+ int ret;
+ struct blinkm_data *data = i2c_get_clientdata(client);
+
+ data->next_red = 0x01;
+ data->next_green = 0x05;
+ data->next_blue = 0x10;
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+ if (ret < 0)
+ return ret;
+ msleep(2000);
+
+ data->next_red = 0x25;
+ data->next_green = 0x10;
+ data->next_blue = 0x31;
+ ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
+ if (ret < 0)
+ return ret;
+ msleep(2000);
+
+ data->next_hue = 0x50;
+ data->next_saturation = 0x10;
+ data->next_brightness = 0x20;
+ ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
+ if (ret < 0)
+ return ret;
+ msleep(2000);
+
+ return 0;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int ret;
+ int count = 99;
+ u8 tmpargs[7];
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_WORD_DATA
+ | I2C_FUNC_SMBUS_WRITE_BYTE))
+ return -ENODEV;
+
+ /* Now, we do the remaining detection. Simple for now. */
+ /* We might need more guards to protect other i2c slaves */
+
+ /* make sure the blinkM is balanced (read/writes) */
+ while (count > 0) {
+ ret = blinkm_write(client, BLM_GET_ADDR, NULL);
+ usleep_range(5000, 10000);
+ ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
+ usleep_range(5000, 10000);
+ if (tmpargs[0] == 0x09)
+ count = 0;
+ count--;
+ }
+
+ /* Step 1: Read BlinkM address back - cmd_char 'a' */
+ ret = blinkm_write(client, BLM_GET_ADDR, NULL);
+ if (ret < 0)
+ return -ENODEV;
+ usleep_range(20000, 30000); /* allow a small delay */
+ ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
+ if (ret < 0)
+ return -ENODEV;
+
+ if (tmpargs[0] != 0x09) {
+ dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
+ return 0;
+}
+
+static int __devinit blinkm_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct blinkm_data *data;
+ struct blinkm_led *led[3];
+ int err, i;
+ char blinkm_led_name[28];
+
+ data = devm_kzalloc(&client->dev,
+ sizeof(struct blinkm_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ data->i2c_addr = 0x09;
+ data->i2c_addr = 0x08;
+ /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
+ data->fw_ver = 0xfe;
+ /* firmware version - use fake until we read real value
+ * (currently broken - BlinkM confused!) */
+ data->script_id = 0x01;
+ data->i2c_client = client;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
+ if (err < 0) {
+ dev_err(&client->dev, "couldn't register sysfs group\n");
+ goto exit;
+ }
+
+ for (i = 0; i < 3; i++) {
+ /* RED = 0, GREEN = 1, BLUE = 2 */
+ led[i] = &data->blinkm_leds[i];
+ led[i]->i2c_client = client;
+ led[i]->id = i;
+ led[i]->led_cdev.max_brightness = 255;
+ led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
+ atomic_set(&led[i]->active, 0);
+ switch (i) {
+ case RED:
+ snprintf(blinkm_led_name, sizeof(blinkm_led_name),
+ "blinkm-%d-%d-red",
+ client->adapter->nr,
+ client->addr);
+ led[i]->led_cdev.name = blinkm_led_name;
+ led[i]->led_cdev.brightness_set = blinkm_led_red_set;
+ err = led_classdev_register(&client->dev,
+ &led[i]->led_cdev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led[i]->led_cdev.name);
+ goto failred;
+ }
+ break;
+ case GREEN:
+ snprintf(blinkm_led_name, sizeof(blinkm_led_name),
+ "blinkm-%d-%d-green",
+ client->adapter->nr,
+ client->addr);
+ led[i]->led_cdev.name = blinkm_led_name;
+ led[i]->led_cdev.brightness_set = blinkm_led_green_set;
+ err = led_classdev_register(&client->dev,
+ &led[i]->led_cdev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led[i]->led_cdev.name);
+ goto failgreen;
+ }
+ break;
+ case BLUE:
+ snprintf(blinkm_led_name, sizeof(blinkm_led_name),
+ "blinkm-%d-%d-blue",
+ client->adapter->nr,
+ client->addr);
+ led[i]->led_cdev.name = blinkm_led_name;
+ led[i]->led_cdev.brightness_set = blinkm_led_blue_set;
+ err = led_classdev_register(&client->dev,
+ &led[i]->led_cdev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led[i]->led_cdev.name);
+ goto failblue;
+ }
+ break;
+ } /* end switch */
+ } /* end for */
+
+ /* Initialize the blinkm */
+ blinkm_init_hw(client);
+
+ return 0;
+
+failblue:
+ led_classdev_unregister(&led[GREEN]->led_cdev);
+
+failgreen:
+ led_classdev_unregister(&led[RED]->led_cdev);
+
+failred:
+ sysfs_remove_group(&client->dev.kobj, &blinkm_group);
+exit:
+ return err;
+}
+
+static int __devexit blinkm_remove(struct i2c_client *client)
+{
+ struct blinkm_data *data = i2c_get_clientdata(client);
+ int ret = 0;
+ int i;
+
+ /* make sure no workqueue entries are pending */
+ for (i = 0; i < 3; i++) {
+ flush_scheduled_work();
+ led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
+ }
+
+ /* reset rgb */
+ data->next_red = 0x00;
+ data->next_green = 0x00;
+ data->next_blue = 0x00;
+ ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ /* reset hsb */
+ data->next_hue = 0x00;
+ data->next_saturation = 0x00;
+ data->next_brightness = 0x00;
+ ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ /* red fade to off */
+ data->next_red = 0xff;
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ /* off */
+ data->next_red = 0x00;
+ ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ sysfs_remove_group(&client->dev.kobj, &blinkm_group);
+ return 0;
+}
+
+static const struct i2c_device_id blinkm_id[] = {
+ {"blinkm", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, blinkm_id);
+
+ /* This is the driver that will be inserted */
+static struct i2c_driver blinkm_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "blinkm",
+ },
+ .probe = blinkm_probe,
+ .remove = __devexit_p(blinkm_remove),
+ .id_table = blinkm_id,
+ .detect = blinkm_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(blinkm_driver);
+
+MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
+MODULE_DESCRIPTION("BlinkM RGB LED driver");
+MODULE_LICENSE("GPL");
+
git.openpandora.org / pandora-kernel.git / commitdiff