--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+
+#include "mt7628a.dtsi"
+
+/ {
+ compatible = "seeed,linkit-smart-7688", "ralink,mt7628a-soc";
+ model = "LinkIt-Smart-7688";
+
+ aliases {
+ serial0 = &uart2;
+ spi0 = &spi0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ stdout-path = &uart2;
+ };
+};
+
+&uart2 {
+ status = "okay";
+ clock-frequency = <40000000>;
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <2>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash", "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+};
choice
prompt "Board select"
+config BOARD_LINKIT_SMART_7688
+ bool "LinkIt Smart 7688"
+ depends on SOC_MT7620
+ select SUPPORTS_BOOT_RAM
+ help
+ Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
+ and 32 MiB of flash (SPI).
+ Between its different peripherals there's an integrated switch with 4
+ ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
+ a MT7688 (PCIe).
+
endchoice
choice
config SUPPORTS_BOOT_RAM
bool
+source "board/seeed/linkit-smart-7688/Kconfig"
+
endmenu
--- /dev/null
+if BOARD_LINKIT_SMART_7688
+
+config SYS_BOARD
+ default "linkit-smart-7688"
+
+config SYS_VENDOR
+ default "seeed"
+
+config SYS_CONFIG_NAME
+ default "linkit-smart-7688"
+
+endif
--- /dev/null
+LINKIT_SMART_7688 BOARD
+M: Stefan Roese <sr@denx.de>
+S: Maintained
+F: board/seeed/linkit-smart-7688
+F: include/configs/linkit-smart-7688.h
+F: configs/linkit-smart-7688_defconfig
+F: configs/linkit-smart-7688_ram_defconfig
+F: arch/mips/dts/linkit-smart-7688.dts
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += board.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MT76XX_GPIO1_MODE 0xb0000060
+
+void board_debug_uart_init(void)
+{
+ /* Select UART2 mode instead of GPIO mode (default) */
+ clrbits_le32((void __iomem *)MT76XX_GPIO1_MODE, GENMASK(27, 26));
+}
+
+int board_early_init_f(void)
+{
+ /*
+ * The pin muxing of UART2 also needs to be done, if debug uart
+ * is not enabled. So we need to call this function here as well.
+ */
+ board_debug_uart_init();
+
+ return 0;
+}
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_ARCH_MT7620=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_NET is not set
+CONFIG_CMD_TIME=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_CLK=y
+CONFIG_CPU=y
+CONFIG_DM_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=57600
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_SYSRESET_SYSCON=y
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x9c000000
+CONFIG_ARCH_MT7620=y
+CONFIG_BOOT_ROM=y
+CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
+CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_NET is not set
+CONFIG_CMD_TIME=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_CLK=y
+CONFIG_CPU=y
+CONFIG_DM_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=57600
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_SYSRESET_SYSCON=y
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Stefan Roese <sr@denx.de>
+ */
+
+#ifndef __CONFIG_LINKIT_SMART_7688_H
+#define __CONFIG_LINKIT_SMART_7688_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 200000000
+
+/* RAM */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+#ifdef CONFIG_BOOT_RAM
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* UART */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
+ 230400, 500000, 1500000 }
+
+/* RAM */
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80400000
+
+/* Memory usage */
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
+#define CONFIG_SYS_CBSIZE 512
+
+/* U-Boot */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+/* Environment settings */
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_SIZE (16 << 10)
+#define CONFIG_ENV_SECT_SIZE (64 << 10)
+
+/*
+ * Environment is right behind U-Boot in flash. Make sure U-Boot
+ * doesn't grow into the environment area.
+ */
+#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
+
+#endif /* __CONFIG_LINKIT_SMART_7688_H */
git.openpandora.org / pandora-u-boot.git / commitdiff