cciss: factor out cciss_find_board_params

cciss: factor out cciss_find_board_params

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b702471..97feb50 100644 (file)
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4072,6 +4072,30 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
        return 0;
 }
 
+/* Interrogate the hardware for some limits:
+ * max commands, max SG elements without chaining, and with chaining,
+ * SG chain block size, etc.
+ */
+static void __devinit cciss_find_board_params(ctlr_info_t *h)
+{
+       h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+       h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+       h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
+       /*
+        * Limit in-command s/g elements to 32 save dma'able memory.
+        * Howvever spec says if 0, use 31
+        */
+       h->max_cmd_sgentries = 31;
+       if (h->maxsgentries > 512) {
+               h->max_cmd_sgentries = 32;
+               h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1;
+               h->maxsgentries--; /* save one for chain pointer */
+       } else {
+               h->maxsgentries = 31; /* default to traditional values */
+               h->chainsize = 0;
+       }
+}
+
 static int __devinit cciss_pci_init(ctlr_info_t *c)
 {
        int prod_index, err;
@@ -4127,34 +4151,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
 #ifdef CCISS_DEBUG
        print_cfg_table(c->cfgtable);
 #endif                         /* CCISS_DEBUG */
+       cciss_find_board_params(c);
 
-       /* Some controllers support Zero Memory Raid (ZMR).
-        * When configured in ZMR mode the number of supported
-        * commands drops to 64. So instead of just setting an
-        * arbitrary value we make the driver a little smarter.
-        * We read the config table to tell us how many commands
-        * are supported on the controller then subtract 4 to
-        * leave a little room for ioctl calls.
-        */
-       c->max_commands = readl(&(c->cfgtable->MaxPerformantModeCommands));
-       c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
-
-       /*
-        * Limit native command to 32 s/g elements to save dma'able memory.
-        * Howvever spec says if 0, use 31
-        */
-
-       c->max_cmd_sgentries = 31;
-       if (c->maxsgentries > 512) {
-               c->max_cmd_sgentries = 32;
-               c->chainsize = c->maxsgentries - c->max_cmd_sgentries + 1;
-               c->maxsgentries -= 1;   /* account for chain pointer */
-       } else {
-               c->maxsgentries = 31;   /* Default to traditional value */
-               c->chainsize = 0;       /* traditional */
-       }
-
-       c->nr_cmds = c->max_commands - 4;
        if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
            (readb(&c->cfgtable->Signature[1]) != 'I') ||
            (readb(&c->cfgtable->Signature[2]) != 'S') ||