<![CDATA[
struct snd_rawmidi *rmidi;
snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
- irq, irq_flags, &rmidi);
+ irq, &rmidi);
]]>
</programlisting>
</informalexample>
by itself to start processing the output stream in the irq handler.
</para>
+ <para>
+ If the MPU-401 interface shares its interrupt with the other logical
+ devices on the card, set <constant>MPU401_INFO_IRQ_HOOK</constant>
+ (see <link linkend="midi-interface-interrupt-handler"><citetitle>
+ below</citetitle></link>).
+ </para>
+
<para>
Usually, the port address corresponds to the command port and
port + 1 corresponds to the data port. If not, you may change
</para>
<para>
- The 6th argument specifies the irq number for UART. If the irq
- is already allocated, pass 0 to the 7th argument
- (<parameter>irq_flags</parameter>). Otherwise, pass the flags
- for irq allocation
- (<constant>SA_XXX</constant> bits) to it, and the irq will be
- reserved by the mpu401-uart layer. If the card doesn't generate
- UART interrupts, pass -1 as the irq number. Then a timer
- interrupt will be invoked for polling.
+ The 6th argument specifies the ISA irq number that will be
+ allocated. If no interrupt is to be allocated (because your
+ code is already allocating a shared interrupt, or because the
+ device does not use interrupts), pass -1 instead.
+ For a MPU-401 device without an interrupt, a polling timer
+ will be used instead.
</para>
</section>
<title>Interrupt Handler</title>
<para>
When the interrupt is allocated in
- <function>snd_mpu401_uart_new()</function>, the private
- interrupt handler is used, hence you don't have anything else to do
- than creating the mpu401 stuff. Otherwise, you have to call
- <function>snd_mpu401_uart_interrupt()</function> explicitly when
- a UART interrupt is invoked and checked in your own interrupt
- handler.
+ <function>snd_mpu401_uart_new()</function>, an exclusive ISA
+ interrupt handler is automatically used, hence you don't have
+ anything else to do than creating the mpu401 stuff. Otherwise, you
+ have to set <constant>MPU401_INFO_IRQ_HOOK</constant>, and call
+ <function>snd_mpu401_uart_interrupt()</function> explicitly from your
+ own interrupt handler when it has determined that a UART interrupt
+ has occurred.
</para>
<para>
#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
#define USB_ENDPOINT_DIR_MASK 0x80
-#define USB_ENDPOINT_SYNCTYPE 0x0c
-#define USB_ENDPOINT_SYNC_NONE (0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
-
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
#define USB_ENDPOINT_XFER_CONTROL 0
#define USB_ENDPOINT_XFER_ISOC 1
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
/*-------------------------------------------------------------------------*/
/**
#define MPU401_INFO_INTEGRATED (1 << 2) /* integrated h/w port */
#define MPU401_INFO_MMIO (1 << 3) /* MMIO access */
#define MPU401_INFO_TX_IRQ (1 << 4) /* independent TX irq */
+#define MPU401_INFO_IRQ_HOOK (1 << 5) /* mpu401 irq handler is called
+ from driver irq handler */
#define MPU401_INFO_NO_ACK (1 << 6) /* No ACK cmd needed */
+#define MPU401_INFO_USE_TIMER (1 << 15) /* internal */
#define MPU401_MODE_BIT_INPUT 0
#define MPU401_MODE_BIT_OUTPUT 1
unsigned long port; /* base port of MPU-401 chip */
unsigned long cport; /* port + 1 (usually) */
struct resource *res; /* port resource */
- int irq; /* IRQ number of MPU-401 chip (-1 = poll) */
- int irq_flags;
+ int irq; /* IRQ number of MPU-401 chip */
unsigned long mode; /* MPU401_MODE_XXXX */
int timer_invoked;
unsigned long port,
unsigned int info_flags,
int irq,
- int irq_flags,
struct snd_rawmidi ** rrawmidi);
#endif /* __SOUND_MPU401_H */
int snd_pcm_hw_constraint_pow2(struct snd_pcm_runtime *runtime,
unsigned int cond,
snd_pcm_hw_param_t var);
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+ unsigned int base_rate);
int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime,
unsigned int cond,
int var,
printk(KERN_DEBUG PFX "created and attached onyx instance\n");
return 0;
fail:
- i2c_set_clientdata(client, NULL);
kfree(onyx);
return -ENODEV;
}
aoa_codec_unregister(&onyx->codec);
of_node_put(onyx->codec.node);
- if (onyx->codec_info)
- kfree(onyx->codec_info);
+ kfree(onyx->codec_info);
kfree(onyx);
return 0;
}
sdev->pcmid = -1;
list_del(&ldev->list);
layouts_list_items--;
+ kfree(ldev);
outnodev:
of_node_put(sound);
layout_device = NULL;
- kfree(ldev);
return -ENODEV;
}
long private_size;
struct user_element *ue;
int idx, err;
-
- if (card->user_ctl_count >= MAX_USER_CONTROLS)
+
+ if (!replace && card->user_ctl_count >= MAX_USER_CONTROLS)
return -ENOMEM;
if (info->count < 1)
return -EINVAL;
EXPORT_SYMBOL(snd_pcm_hw_constraint_pow2);
+static int snd_pcm_hw_rule_noresample_func(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ unsigned int base_rate = (unsigned int)(uintptr_t)rule->private;
+ struct snd_interval *rate;
+
+ rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
+ return snd_interval_list(rate, 1, &base_rate, 0);
+}
+
+/**
+ * snd_pcm_hw_rule_noresample - add a rule to allow disabling hw resampling
+ * @runtime: PCM runtime instance
+ * @base_rate: the rate at which the hardware does not resample
+ */
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+ unsigned int base_rate)
+{
+ return snd_pcm_hw_rule_add(runtime, SNDRV_PCM_HW_PARAMS_NORESAMPLE,
+ SNDRV_PCM_HW_PARAM_RATE,
+ snd_pcm_hw_rule_noresample_func,
+ (void *)(uintptr_t)base_rate,
+ SNDRV_PCM_HW_PARAM_RATE, -1);
+}
+EXPORT_SYMBOL(snd_pcm_hw_rule_noresample);
+
static void _snd_pcm_hw_param_any(struct snd_pcm_hw_params *params,
snd_pcm_hw_param_t var)
{
snd_pcm_uframes_t avail = 0;
long wait_time, tout;
+ init_waitqueue_entry(&wait, current);
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&runtime->tsleep, &wait);
+
if (runtime->no_period_wakeup)
wait_time = MAX_SCHEDULE_TIMEOUT;
else {
}
wait_time = msecs_to_jiffies(wait_time * 1000);
}
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&runtime->tsleep, &wait);
+
for (;;) {
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
}
+
+ /*
+ * We need to check if space became available already
+ * (and thus the wakeup happened already) first to close
+ * the race of space already having become available.
+ * This check must happen after been added to the waitqueue
+ * and having current state be INTERRUPTIBLE.
+ */
+ if (is_playback)
+ avail = snd_pcm_playback_avail(runtime);
+ else
+ avail = snd_pcm_capture_avail(runtime);
+ if (avail >= runtime->twake)
+ break;
snd_pcm_stream_unlock_irq(substream);
- tout = schedule_timeout_interruptible(wait_time);
+
+ tout = schedule_timeout(wait_time);
+
snd_pcm_stream_lock_irq(substream);
+ set_current_state(TASK_INTERRUPTIBLE);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_SUSPENDED:
err = -ESTRPIPE;
err = -EIO;
break;
}
- if (is_playback)
- avail = snd_pcm_playback_avail(runtime);
- else
- avail = snd_pcm_capture_avail(runtime);
- if (avail >= runtime->twake)
- break;
}
_endloop:
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&runtime->tsleep, &wait);
*availp = avail;
return err;
mutex_unlock(®ister_mutex);
} else {
timer = timeri->timer;
+ if (snd_BUG_ON(!timer))
+ goto out;
/* wait, until the active callback is finished */
spin_lock_irq(&timer->lock);
while (timeri->flags & SNDRV_TIMER_IFLG_CALLBACK) {
}
mutex_unlock(®ister_mutex);
}
+ out:
if (timeri->private_free)
timeri->private_free(timeri);
kfree(timeri->owner);
if (err < 0)
return err;
timer = timeri->timer;
+ if (!timer)
+ return -EINVAL;
spin_lock_irqsave(&timer->lock, flags);
timeri->cticks = timeri->ticks;
timeri->pticks = 0;
}
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev], 0,
- irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0,
- NULL);
+ irq[dev], NULL);
if (err < 0) {
printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
goto _err;
* Routines for control of MPU-401 in UART mode
*
* MPU-401 supports UART mode which is not capable generate transmit
- * interrupts thus output is done via polling. Also, if irq < 0, then
+ * interrupts thus output is done via polling. Without interrupt,
* input is done also via polling. Do not expect good performance.
*
*
/* first time - flush FIFO */
while (max-- > 0)
mpu->read(mpu, MPU401D(mpu));
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_add_timer(mpu, 1);
}
snd_mpu401_uart_input_read(mpu);
spin_unlock_irqrestore(&mpu->input_lock, flags);
} else {
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_remove_timer(mpu, 1);
clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode);
}
static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
{
struct snd_mpu401 *mpu = rmidi->private_data;
- if (mpu->irq_flags && mpu->irq >= 0)
+ if (mpu->irq >= 0)
free_irq(mpu->irq, (void *) mpu);
release_and_free_resource(mpu->res);
kfree(mpu);
* @hardware: the hardware type, MPU401_HW_XXXX
* @port: the base address of MPU401 port
* @info_flags: bitflags MPU401_INFO_XXX
- * @irq: the irq number, -1 if no interrupt for mpu
- * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved.
+ * @irq: the ISA irq number, -1 if not to be allocated
* @rrawmidi: the pointer to store the new rawmidi instance
*
* Creates a new MPU-401 instance.
unsigned short hardware,
unsigned long port,
unsigned int info_flags,
- int irq, int irq_flags,
+ int irq,
struct snd_rawmidi ** rrawmidi)
{
struct snd_mpu401 *mpu;
mpu->cport = port + 2;
else
mpu->cport = port + 1;
- if (irq >= 0 && irq_flags) {
- if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags,
+ if (irq >= 0) {
+ if (request_irq(irq, snd_mpu401_uart_interrupt, IRQF_DISABLED,
"MPU401 UART", (void *) mpu)) {
snd_printk(KERN_ERR "mpu401_uart: "
"unable to grab IRQ %d\n", irq);
return -EBUSY;
}
}
+ if (irq < 0 && !(info_flags & MPU401_INFO_IRQ_HOOK))
+ info_flags |= MPU401_INFO_USE_TIMER;
mpu->info_flags = info_flags;
mpu->irq = irq;
- mpu->irq_flags = irq_flags;
if (card->shortname[0])
snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI",
card->shortname);
struct fw_unit *unit;
struct fw_device *device;
u64 audio_base;
- struct fw_address_handler iris_handler;
struct snd_pcm_substream *pcm;
struct mutex mutex;
struct iso_packets_buffer buffer;
if (mpu_port[dev] > 0) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
+ mpu_port[dev], 0, mpu_irq[dev],
NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]);
}
mpu_type,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
if (mpuport[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
mpuport[dev], 0, mpuirq[dev],
- IRQF_DISABLED, NULL) < 0)
+ NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
mpuport[dev]);
}
mpu_irq[n] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[n], 0, mpu_irq[n],
- mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
dev_warn(dev, "MPU401 not detected\n");
}
mpu_irq[dev] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[dev], 0,
- mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
printk(KERN_WARNING IDENT ": MPU401 not detected\n");
}
chip->mpu_port > 0) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
chip->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ mpu_irq[n], NULL);
if (error < 0)
return error;
}
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
- mpu_port[dev], 0,
- irq[dev], 0, &chip->rmidi);
+ mpu_port[dev], MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
return err;
}
if (mpu_port[n] >= 0) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[n], 0, mpu_irq[n],
- IRQF_DISABLED, NULL);
+ mpu_port[n], 0, mpu_irq[n], NULL);
if (err < 0)
goto error;
}
if (es1688->mpu_port >= 0x300) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
- es1688->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ es1688->mpu_port, 0, mpu_irq[n], NULL);
if (error < 0)
goto out;
}
mpu_io[0],
MPU401_MODE_INPUT |
MPU401_MODE_OUTPUT,
- mpu_irq[0], IRQF_DISABLED,
+ mpu_irq[0],
&chip->rmidi);
if (err < 0) {
printk(KERN_ERR LOGNAME
}
if (midi_port[dev] >= 0x300 && midi_port[dev] < 0x340) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_OPL3SA2,
- midi_port[dev], 0,
- xirq, 0, &chip->rmidi)) < 0)
+ midi_port[dev],
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
}
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
- &rmidi);
+ mpu_port, 0, miro->mpu_irq, &rmidi);
if (error < 0)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi);
+ mpu_port, 0, mpu_irq, &rmidi);
if (error)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
MPU401_HW_MPU401,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx\n",
mpu_port[dev]);
if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SB,
- chip->mpu_port, 0,
- xirq, 0, &chip->rmidi)) < 0)
+ chip->mpu_port,
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
chip->rmidi_callback = snd_mpu401_uart_interrupt;
}
if (snd_mpu401_uart_new(card, 0,
MPU401_HW_MPU401,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
mpu_port[dev]);
}
int err;
err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
- MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
- &rawmidi);
+ MPU401_INFO_INTEGRATED, irq, &rawmidi);
if (err == 0) {
struct snd_mpu401 *mpu = rawmidi->private_data;
mpu->open_input = mpu401_open;
if (cs4232_mpu_port[dev] > 0 && cs4232_mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, midi_dev, MPU401_HW_CS4232,
cs4232_mpu_port[dev], 0,
- cs4232_mpu_irq[dev], IRQF_DISABLED,
- NULL);
+ cs4232_mpu_irq[dev], NULL);
if (err < 0) {
snd_printk (KERN_ERR "can't allocate CS4232 MPU-401 device\n");
return err;
if (pcm_channels & 2)
{
- foo = ((CLOCK_TICK_RATE / 2) + (arg / 2)) / arg;
- arg = ((CLOCK_TICK_RATE / 2) + (foo / 2)) / foo;
+ foo = ((PIT_TICK_RATE / 2) + (arg / 2)) / arg;
+ arg = ((PIT_TICK_RATE / 2) + (foo / 2)) / foo;
}
else
{
- foo = (CLOCK_TICK_RATE + (arg / 2)) / arg;
- arg = (CLOCK_TICK_RATE + (foo / 2)) / foo;
+ foo = (PIT_TICK_RATE + (arg / 2)) / arg;
+ arg = (PIT_TICK_RATE + (foo / 2)) / foo;
}
pcm_speed = arg;
if (pss_cdrom_port == -1) { /* If cdrom port enablation wasn't requested */
printk(KERN_INFO "PSS: CDROM port not enabled.\n");
- } else if (check_region(pss_cdrom_port, 2)) {
+ } else if (!request_region(pss_cdrom_port, 2, "PSS CDROM")) {
+ pss_cdrom_port = -1;
printk(KERN_ERR "PSS: CDROM I/O port conflict.\n");
} else {
set_io_base(devc, CONF_CDROM, pss_cdrom_port);
if(pssmpu)
unload_pss_mpu(&cfg_mpu);
unload_pss(&cfg);
- }
+ } else if (pss_cdrom_port != -1)
+ release_region(pss_cdrom_port, 2);
if(!pss_keep_settings) /* Keep hardware settings if asked */
{
# ALSA PCI drivers
+config SND_TEA575X
+ tristate
+ depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2
+ default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2
+
menuconfig SND_PCI
bool "PCI sound devices"
depends on PCI
FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and
SF64-PCR) into the snd-fm801 driver.
-config SND_TEA575X
- tristate
- depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2
- default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2
-
source "sound/pci/hda/Kconfig"
config SND_HDSP
0x103c0944, /* HP nc6220 */
0x103c0934, /* HP nc8220 */
0x103c006d, /* HP nx9105 */
+ 0x103c300d, /* HP Compaq dc5100 SFF(PT003AW) */
0x17340088, /* FSC Scenic-W */
0 /* end */
};
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000,
iobase + ALS4K_IOB_30_MIDI_DATA,
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n",
iobase + ALS4K_IOB_30_MIDI_DATA);
goto out_err;
if (!p_cache)
return NULL;
- p_cache->p_info =
- kmalloc(sizeof(*p_cache->p_info) * control_count, GFP_KERNEL);
+ p_cache->p_info = kzalloc(sizeof(*p_cache->p_info) * control_count,
+ GFP_KERNEL);
if (!p_cache->p_info) {
kfree(p_cache);
return NULL;
}
- memset(p_cache->p_info, 0, sizeof(*p_cache->p_info) * control_count);
p_cache->cache_size_in_bytes = size_in_bytes;
p_cache->control_count = control_count;
p_cache->p_cache = p_dsp_control_buffer;
#ifdef VORTEX_MPU401_LEGACY
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_MPU401, 0x330,
- 0, 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA);
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port,
- MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO,
- 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO |
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
int err;
snd_azf3328_dbgcallenter();
- if (dev >= SNDRV_CARDS)
- return -ENODEV;
+ if (dev >= SNDRV_CARDS) {
+ err = -ENODEV;
+ goto out;
+ }
if (!enable[dev]) {
dev++;
- return -ENOENT;
+ err = -ENOENT;
+ goto out;
}
err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
if (err < 0)
- return err;
+ goto out;
strcpy(card->driver, "AZF3328");
strcpy(card->shortname, "Aztech AZF3328 (PCI168)");
since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
card, 0,
- MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi
+ MPU401_HW_AZT2320, chip->mpu_io,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi
);
if (err < 0) {
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n",
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
iomidi,
(integrated_midi ?
- MPU401_INFO_INTEGRATED : 0),
- cm->irq, 0, &cm->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED : 0) |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &cm->rmidi)) < 0) {
printk(KERN_ERR "cmipci: no UART401 device at 0x%lx\n", iomidi);
}
}
int err;
int playback_count, capture_count;
- playback_count = (IEC958 == device) ? 1 : 8;
+ playback_count = (IEC958 == device) ? 1 : 256;
capture_count = (FRONT == device) ? 1 : 0;
err = snd_pcm_new(atc->card, "ctxfi", device,
playback_count, capture_count, &pcm);
#include "cthardware.h"
#include <linux/slab.h>
-#define SRC_RESOURCE_NUM 64
+#define SRC_RESOURCE_NUM 256
#define SRCIMP_RESOURCE_NUM 256
static unsigned int conj_mask;
#ifndef CTVMEM_H
#define CTVMEM_H
-#define CT_PTP_NUM 1 /* num of device page table pages */
+#define CT_PTP_NUM 4 /* num of device page table pages */
#include <linux/mutex.h>
#include <linux/list.h>
kfree(epcm);
return err;
}
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0) {
+ kfree(epcm);
+ return err;
+ }
mix = &emu->pcm_mixer[substream->number];
for (i = 0; i < 4; i++)
mix->send_routing[0][i] = mix->send_routing[1][i] = mix->send_routing[2][i] = i;
}
}
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ chip->mpu_port,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi) < 0) {
printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
} else {
// this line is vital for MIDI interrupt handling on ess-solo1
if (enable_mpu[dev]) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
chip->io_port + ESM_MPU401_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_WARNING "es1968: skipping MPU-401 MIDI support..\n");
}
}
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_FM801,
FM801_REG(chip, MPU401_DATA),
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
snd_card_free(card);
return err;
}
static const struct alc_config_preset alc268_presets[] = {
[ALC267_QUANTA_IL1] = {
- .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer,
- alc268_capture_nosrc_mixer },
+ .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
+ .cap_mixer = alc268_capture_nosrc_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc267_quanta_il1_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.init_hook = alc_inithook,
},
[ALC268_3ST] = {
- .mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
- alc268_beep_mixer },
+ .mixers = { alc268_base_mixer, alc268_beep_mixer },
+ .cap_mixer = alc268_capture_alt_mixer,
.init_verbs = { alc268_base_init_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.dac_nids = alc268_dac_nids,
.input_mux = &alc268_capture_source,
},
[ALC268_TOSHIBA] = {
- .mixers = { alc268_toshiba_mixer, alc268_capture_alt_mixer,
- alc268_beep_mixer },
+ .mixers = { alc268_toshiba_mixer, alc268_beep_mixer },
+ .cap_mixer = alc268_capture_alt_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_toshiba_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.init_hook = alc_inithook,
},
[ALC268_ACER] = {
- .mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
- alc268_beep_mixer },
+ .mixers = { alc268_acer_mixer, alc268_beep_mixer },
+ .cap_mixer = alc268_capture_alt_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.init_hook = alc_inithook,
},
[ALC268_ACER_DMIC] = {
- .mixers = { alc268_acer_dmic_mixer, alc268_capture_alt_mixer,
- alc268_beep_mixer },
+ .mixers = { alc268_acer_dmic_mixer, alc268_beep_mixer },
+ .cap_mixer = alc268_capture_alt_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.init_hook = alc_inithook,
},
[ALC268_ACER_ASPIRE_ONE] = {
- .mixers = { alc268_acer_aspire_one_mixer,
- alc268_beep_mixer,
- alc268_capture_nosrc_mixer },
+ .mixers = { alc268_acer_aspire_one_mixer, alc268_beep_mixer},
+ .cap_mixer = alc268_capture_nosrc_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_aspire_one_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.init_hook = alc_inithook,
},
[ALC268_DELL] = {
- .mixers = { alc268_dell_mixer, alc268_beep_mixer,
- alc268_capture_nosrc_mixer },
+ .mixers = { alc268_dell_mixer, alc268_beep_mixer},
+ .cap_mixer = alc268_capture_nosrc_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_dell_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.init_hook = alc_inithook,
},
[ALC268_ZEPTO] = {
- .mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
- alc268_beep_mixer },
+ .mixers = { alc268_base_mixer, alc268_beep_mixer },
+ .cap_mixer = alc268_capture_alt_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_toshiba_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
},
#ifdef CONFIG_SND_DEBUG
[ALC268_TEST] = {
- .mixers = { alc268_test_mixer, alc268_capture_mixer },
+ .mixers = { alc268_test_mixer },
+ .cap_mixer = alc268_capture_mixer,
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_volume_init_verbs,
alc268_beep_init_verbs },
SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_DMIC),
SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
- ALC269_DMIC),
- SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
- ALC269_DMIC),
- SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005HA", ALC269_DMIC),
- SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005HA", ALC269_DMIC),
SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_AUTO),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_DMIC),
return -1;
}
recursive++;
- for (i = 0; i < nums; i++)
+ for (i = 0; i < nums; i++) {
+ unsigned int type = get_wcaps_type(get_wcaps(codec, conn[i]));
+ if (type == AC_WID_PIN || type == AC_WID_AUD_OUT)
+ continue;
if (snd_hda_get_conn_index(codec, conn[i], nid, recursive) >= 0)
return i;
+ }
return -1;
}
EXPORT_SYMBOL_HDA(snd_hda_get_conn_index);
SNDRV_PCM_RATE_192000, /* 7: 192000Hz */
};
-static unsigned char hdmi_get_eld_byte(struct hda_codec *codec, hda_nid_t nid,
+static unsigned int hdmi_get_eld_data(struct hda_codec *codec, hda_nid_t nid,
int byte_index)
{
unsigned int val;
val = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_HDMI_ELDD, byte_index);
-
#ifdef BE_PARANOID
printk(KERN_INFO "HDMI: ELD data byte %d: 0x%x\n", byte_index, val);
#endif
-
- if ((val & AC_ELDD_ELD_VALID) == 0) {
- snd_printd(KERN_INFO "HDMI: invalid ELD data byte %d\n",
- byte_index);
- val = 0;
- }
-
- return val & AC_ELDD_ELD_DATA;
+ return val;
}
#define GRAB_BITS(buf, byte, lowbit, bits) \
if (!buf)
return -ENOMEM;
- for (i = 0; i < size; i++)
- buf[i] = hdmi_get_eld_byte(codec, nid, i);
+ for (i = 0; i < size; i++) {
+ unsigned int val = hdmi_get_eld_data(codec, nid, i);
+ if (!(val & AC_ELDD_ELD_VALID)) {
+ if (!i) {
+ snd_printd(KERN_INFO
+ "HDMI: invalid ELD data\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ snd_printd(KERN_INFO
+ "HDMI: invalid ELD data byte %d\n", i);
+ val = 0;
+ } else
+ val &= AC_ELDD_ELD_DATA;
+ buf[i] = val;
+ }
ret = hdmi_update_eld(eld, buf, size);
+error:
kfree(buf);
return ret;
}
static hda_nid_t get_adc(struct hda_codec *codec, hda_nid_t pin,
unsigned int *idxp)
{
- int i;
+ int i, idx;
hda_nid_t nid;
nid = codec->start_nid;
type = get_wcaps_type(get_wcaps(codec, nid));
if (type != AC_WID_AUD_IN)
continue;
- *idxp = snd_hda_get_conn_index(codec, nid, pin, false);
- if (*idxp >= 0)
+ idx = snd_hda_get_conn_index(codec, nid, pin, false);
+ if (idx >= 0) {
+ *idxp = idx;
return nid;
+ }
}
return 0;
}
int index, unsigned int pval, int dir,
struct snd_kcontrol **kctlp)
{
- char tmp[32];
+ char tmp[44];
struct snd_kcontrol_new knew =
HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
knew.private_value = pval;
#define MAX_AUTO_DACS 5
+#define DAC_SLAVE_FLAG 0x8000 /* filled dac is a slave */
+
/* fill analog DAC list from the widget tree */
static int fill_cx_auto_dacs(struct hda_codec *codec, hda_nid_t *dacs)
{
/* fill pin_dac_pair list from the pin and dac list */
static int fill_dacs_for_pins(struct hda_codec *codec, hda_nid_t *pins,
int num_pins, hda_nid_t *dacs, int *rest,
- struct pin_dac_pair *filled, int type)
+ struct pin_dac_pair *filled, int nums,
+ int type)
{
- int i, nums;
+ int i, start = nums;
- nums = 0;
- for (i = 0; i < num_pins; i++) {
+ for (i = 0; i < num_pins; i++, nums++) {
filled[nums].pin = pins[i];
filled[nums].type = type;
filled[nums].dac = get_unassigned_dac(codec, pins[i], dacs, rest);
- nums++;
+ if (filled[nums].dac)
+ continue;
+ if (filled[start].dac && get_connection_index(codec, pins[i], filled[start].dac) >= 0) {
+ filled[nums].dac = filled[start].dac | DAC_SLAVE_FLAG;
+ continue;
+ }
+ if (filled[0].dac && get_connection_index(codec, pins[i], filled[0].dac) >= 0) {
+ filled[nums].dac = filled[0].dac | DAC_SLAVE_FLAG;
+ continue;
+ }
+ snd_printdd("Failed to find a DAC for pin 0x%x", pins[i]);
}
return nums;
}
rest = fill_cx_auto_dacs(codec, dacs);
/* parse all analog output pins */
nums = fill_dacs_for_pins(codec, cfg->line_out_pins, cfg->line_outs,
- dacs, &rest, spec->dac_info,
- AUTO_PIN_LINE_OUT);
- nums += fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs,
- dacs, &rest, spec->dac_info + nums,
- AUTO_PIN_HP_OUT);
- nums += fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs,
- dacs, &rest, spec->dac_info + nums,
- AUTO_PIN_SPEAKER_OUT);
+ dacs, &rest, spec->dac_info, 0,
+ AUTO_PIN_LINE_OUT);
+ nums = fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs,
+ dacs, &rest, spec->dac_info, nums,
+ AUTO_PIN_HP_OUT);
+ nums = fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs,
+ dacs, &rest, spec->dac_info, nums,
+ AUTO_PIN_SPEAKER_OUT);
spec->dac_info_filled = nums;
/* fill multiout struct */
for (i = 0; i < nums; i++) {
hda_nid_t dac = spec->dac_info[i].dac;
- if (!dac)
+ if (!dac || (dac & DAC_SLAVE_FLAG))
continue;
switch (spec->dac_info[i].type) {
case AUTO_PIN_LINE_OUT:
}
if (imux->num_items >= 2 && cfg->num_inputs == imux->num_items)
cx_auto_check_auto_mic(codec);
- if (imux->num_items > 1 && !spec->auto_mic) {
+ if (imux->num_items > 1) {
for (i = 1; i < imux->num_items; i++) {
if (spec->imux_info[i].adc != spec->imux_info[0].adc) {
spec->adc_switching = 1;
nid = spec->dac_info[i].dac;
if (!nid)
nid = spec->multiout.dac_nids[0];
+ else if (nid & DAC_SLAVE_FLAG)
+ nid &= ~DAC_SLAVE_FLAG;
select_connection(codec, spec->dac_info[i].pin, nid);
}
if (spec->auto_mute) {
hda_nid_t pin, const char *name, int idx)
{
unsigned int caps;
- caps = query_amp_caps(codec, dac, HDA_OUTPUT);
- if (caps & AC_AMPCAP_NUM_STEPS)
- return cx_auto_add_pb_volume(codec, dac, name, idx);
+ if (dac && !(dac & DAC_SLAVE_FLAG)) {
+ caps = query_amp_caps(codec, dac, HDA_OUTPUT);
+ if (caps & AC_AMPCAP_NUM_STEPS)
+ return cx_auto_add_pb_volume(codec, dac, name, idx);
+ }
caps = query_amp_caps(codec, pin, HDA_OUTPUT);
if (caps & AC_AMPCAP_NUM_STEPS)
return cx_auto_add_pb_volume(codec, pin, name, idx);
for (i = 0; i < spec->dac_info_filled; i++) {
const char *label;
int idx, type;
- if (!spec->dac_info[i].dac)
- continue;
+ hda_nid_t dac = spec->dac_info[i].dac;
type = spec->dac_info[i].type;
if (type == AUTO_PIN_LINE_OUT)
type = spec->autocfg.line_out_type;
idx = num_spk++;
break;
}
- err = try_add_pb_volume(codec, spec->dac_info[i].dac,
+ err = try_add_pb_volume(codec, dac,
spec->dac_info[i].pin,
label, idx);
if (err < 0)
{
struct alc_spec *spec = codec->spec;
- if (!spec->automute)
- return;
spec->jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
spec->autocfg.hp_pins);
+ if (!spec->automute)
+ return;
update_speakers(codec);
}
{
struct alc_spec *spec = codec->spec;
- if (!spec->automute || !spec->detect_line)
- return;
spec->line_jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
spec->autocfg.line_out_pins);
+ if (!spec->automute || !spec->detect_line)
+ return;
update_speakers(codec);
}
"Speaker Playback Volume",
"Mono Playback Volume",
"Line-Out Playback Volume",
+ "PCM Playback Volume",
NULL,
};
"Mono Playback Switch",
"IEC958 Playback Switch",
"Line-Out Playback Switch",
+ "PCM Playback Switch",
NULL,
};
static void alc_auto_init_extra_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- hda_nid_t pin;
+ hda_nid_t pin, dac;
pin = spec->autocfg.hp_pins[0];
- if (pin)
- alc_auto_set_output_and_unmute(codec, pin, PIN_HP,
- spec->multiout.hp_nid);
+ if (pin) {
+ dac = spec->multiout.hp_nid;
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ alc_auto_set_output_and_unmute(codec, pin, PIN_HP, dac);
+ }
pin = spec->autocfg.speaker_pins[0];
- if (pin)
- alc_auto_set_output_and_unmute(codec, pin, PIN_OUT,
- spec->multiout.extra_out_nid[0]);
+ if (pin) {
+ dac = spec->multiout.extra_out_nid[0];
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ alc_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac);
+ }
}
/*
spec->stream_analog_capture = &alc269_44k_pcm_analog_capture;
}
+static void alc269_fixup_stereo_dmic(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ int coef;
+
+ if (action != ALC_FIXUP_ACT_INIT)
+ return;
+ /* The digital-mic unit sends PDM (differential signal) instead of
+ * the standard PCM, thus you can't record a valid mono stream as is.
+ * Below is a workaround specific to ALC269 to control the dmic
+ * signal source as mono.
+ */
+ coef = alc_read_coef_idx(codec, 0x07);
+ alc_write_coef_idx(codec, 0x07, coef | 0x80);
+}
+
enum {
ALC269_FIXUP_SONY_VAIO,
ALC275_FIXUP_SONY_VAIO_GPIO2,
ALC275_FIXUP_SONY_HWEQ,
ALC271_FIXUP_DMIC,
ALC269_FIXUP_PCM_44K,
+ ALC269_FIXUP_STEREO_DMIC,
};
static const struct alc_fixup alc269_fixups[] = {
.type = ALC_FIXUP_FUNC,
.v.func = alc269_fixup_pcm_44k,
},
+ [ALC269_FIXUP_STEREO_DMIC] = {
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc269_fixup_stereo_dmic,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
+ SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
return 0;
}
+#ifdef CONFIG_SND_HDA_POWER_SAVE
static int stac_vrefout_set(struct hda_codec *codec,
hda_nid_t nid, unsigned int new_vref)
{
return 1;
}
+#endif
static unsigned int stac92xx_vref_set(struct hda_codec *codec,
hda_nid_t nid, unsigned int new_vref)
struct via_spec *spec = codec->spec;
struct nid_path *path;
bool check_dac;
- hda_nid_t pin, dac;
+ hda_nid_t pin, dac = 0;
int err;
pin = spec->autocfg.speaker_pins[0];
if (!c->no_mpu401) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
ICEREG(ice, MPU1_CTRL),
- (c->mpu401_1_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[0]);
+ c->mpu401_1_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[0]);
if (err < 0) {
snd_card_free(card);
return err;
/* 2nd port used */
err = snd_mpu401_uart_new(card, 1, MPU401_HW_ICE1712,
ICEREG(ice, MPU2_CTRL),
- (c->mpu401_2_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[1]);
+ c->mpu401_2_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[1]);
if (err < 0) {
snd_card_free(card);
/* TODO enable MIDI IRQ and I/O */
err = snd_mpu401_uart_new(chip->card, 0, MPU401_HW_MPU401,
chip->iobase + MPU401_DATA_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi);
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
printk(KERN_WARNING "maestro3: no MIDI support.\n");
#endif
goto err_card;
if (chip->model.device_config & (MIDI_OUTPUT | MIDI_INPUT)) {
- unsigned int info_flags = MPU401_INFO_INTEGRATED;
+ unsigned int info_flags =
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK;
if (chip->model.device_config & MIDI_OUTPUT)
info_flags |= MPU401_INFO_OUTPUT;
if (chip->model.device_config & MIDI_INPUT)
info_flags |= MPU401_INFO_INPUT;
err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
chip->addr + OXYGEN_MPU401,
- info_flags, 0, 0,
- &chip->midi);
+ info_flags, -1, &chip->midi);
if (err < 0)
goto err_card;
}
.device_config = PLAYBACK_0_TO_I2S |
PLAYBACK_1_TO_SPDIF |
CAPTURE_0_FROM_I2S_2 |
+ CAPTURE_1_FROM_SPDIF |
AC97_FMIC_SWITCH,
.dac_channels_pcm = 2,
.dac_channels_mixer = 2,
val = mpu_port[dev];
pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
- val, 0, chip->irq, 0,
+ val, MPU401_INFO_IRQ_HOOK, -1,
&chip->rmidi);
if (err < 0)
snd_printk(KERN_WARNING
return rate;
}
+/* return latency in samples per period */
+static int hdspm_get_latency(struct hdspm *hdspm)
+{
+ int n;
+
+ n = hdspm_decode_latency(hdspm->control_register);
+
+ /* Special case for new RME cards with 32 samples period size.
+ * The three latency bits in the control register
+ * (HDSP_LatencyMask) encode latency values of 64 samples as
+ * 0, 128 samples as 1 ... 4096 samples as 6. For old cards, 7
+ * denotes 8192 samples, but on new cards like RayDAT or AIO,
+ * it corresponds to 32 samples.
+ */
+ if ((7 == n) && (RayDAT == hdspm->io_type || AIO == hdspm->io_type))
+ n = -1;
+
+ return 1 << (n + 6);
+}
+
/* Latency function */
static inline void hdspm_compute_period_size(struct hdspm *hdspm)
{
- hdspm->period_bytes = 1 << ((hdspm_decode_latency(hdspm->control_register) + 8));
+ hdspm->period_bytes = 4 * hdspm_get_latency(hdspm);
}
spin_lock_irq(&s->lock);
- frames >>= 7;
- n = 0;
- while (frames) {
- n++;
- frames >>= 1;
+ if (32 == frames) {
+ /* Special case for new RME cards like RayDAT/AIO which
+ * support period sizes of 32 samples. Since latency is
+ * encoded in the three bits of HDSP_LatencyMask, we can only
+ * have values from 0 .. 7. While 0 still means 64 samples and
+ * 6 represents 4096 samples on all cards, 7 represents 8192
+ * on older cards and 32 samples on new cards.
+ *
+ * In other words, period size in samples is calculated by
+ * 2^(n+6) with n ranging from 0 .. 7.
+ */
+ n = 7;
+ } else {
+ frames >>= 7;
+ n = 0;
+ while (frames) {
+ n++;
+ frames >>= 1;
+ }
}
+
s->control_register &= ~HDSPM_LatencyMask;
s->control_register |= hdspm_encode_latency(n);
break;
case MADIface:
freq_const = 131072000000000ULL;
+ break;
+ default:
+ snd_BUG();
+ return 0;
}
return div_u64(freq_const, period);
switch (hdspm->io_type) {
case MADIface:
- n = 131072000000000ULL; /* 125 MHz */
- break;
+ n = 131072000000000ULL; /* 125 MHz */
+ break;
case MADI:
case AES32:
- n = 110069313433624ULL; /* 105 MHz */
- break;
+ n = 110069313433624ULL; /* 105 MHz */
+ break;
case RayDAT:
case AIO:
- n = 104857600000000ULL; /* 100 MHz */
- break;
+ n = 104857600000000ULL; /* 100 MHz */
+ break;
+ default:
+ snd_BUG();
+ return;
}
n = div_u64(n, rate);
snd_iprintf(buffer, "--- Settings ---\n");
- x = 1 << (6 + hdspm_decode_latency(hdspm->control_register &
- HDSPM_LatencyMask));
+ x = hdspm_get_latency(hdspm);
snd_iprintf(buffer,
"Size (Latency): %d samples (2 periods of %lu bytes)\n",
snd_iprintf(buffer, "--- Settings ---\n");
- x = 1 << (6 + hdspm_decode_latency(hdspm->control_register &
- HDSPM_LatencyMask));
+ x = hdspm_get_latency(hdspm);
snd_iprintf(buffer,
"Size (Latency): %d samples (2 periods of %lu bytes)\n",
return 0;
}
-static unsigned int period_sizes_old[] = {
- 64, 128, 256, 512, 1024, 2048, 4096
-};
-
-static unsigned int period_sizes_new[] = {
- 32, 64, 128, 256, 512, 1024, 2048, 4096
-};
-
-/* RayDAT and AIO always have a buffer of 16384 samples per channel */
-static unsigned int raydat_aio_buffer_sizes[] = {
- 16384
-};
-
static struct snd_pcm_hardware snd_hdspm_playback_subinfo = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
.channels_max = HDSPM_MAX_CHANNELS,
.buffer_bytes_max =
HDSPM_CHANNEL_BUFFER_BYTES * HDSPM_MAX_CHANNELS,
- .period_bytes_min = (64 * 4),
- .period_bytes_max = (4096 * 4) * HDSPM_MAX_CHANNELS,
+ .period_bytes_min = (32 * 4),
+ .period_bytes_max = (8192 * 4) * HDSPM_MAX_CHANNELS,
.periods_min = 2,
.periods_max = 512,
.fifo_size = 0
.channels_max = HDSPM_MAX_CHANNELS,
.buffer_bytes_max =
HDSPM_CHANNEL_BUFFER_BYTES * HDSPM_MAX_CHANNELS,
- .period_bytes_min = (64 * 4),
- .period_bytes_max = (4096 * 4) * HDSPM_MAX_CHANNELS,
+ .period_bytes_min = (32 * 4),
+ .period_bytes_max = (8192 * 4) * HDSPM_MAX_CHANNELS,
.periods_min = 2,
.periods_max = 512,
.fifo_size = 0
};
-static struct snd_pcm_hw_constraint_list hw_constraints_period_sizes_old = {
- .count = ARRAY_SIZE(period_sizes_old),
- .list = period_sizes_old,
- .mask = 0
-};
-
-static struct snd_pcm_hw_constraint_list hw_constraints_period_sizes_new = {
- .count = ARRAY_SIZE(period_sizes_new),
- .list = period_sizes_new,
- .mask = 0
-};
-
-static struct snd_pcm_hw_constraint_list hw_constraints_raydat_io_buffer = {
- .count = ARRAY_SIZE(raydat_aio_buffer_sizes),
- .list = raydat_aio_buffer_sizes,
- .mask = 0
-};
-
static int snd_hdspm_hw_rule_in_channels_rate(struct snd_pcm_hw_params *params,
struct snd_pcm_hw_rule *rule)
{
spin_unlock_irq(&hdspm->lock);
snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
+ snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
switch (hdspm->io_type) {
case AIO:
case RayDAT:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_new);
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
- &hw_constraints_raydat_io_buffer);
-
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 32, 4096);
+ /* RayDAT & AIO have a fixed buffer of 16384 samples per channel */
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 16384, 16384);
break;
default:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_old);
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 64, 8192);
+ break;
}
if (AES32 == hdspm->io_type) {
+ runtime->hw.rates |= SNDRV_PCM_RATE_KNOT;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&hdspm_hw_constraints_aes32_sample_rates);
} else {
spin_unlock_irq(&hdspm->lock);
snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
+ snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
+
switch (hdspm->io_type) {
case AIO:
case RayDAT:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_new);
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
- &hw_constraints_raydat_io_buffer);
- break;
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 32, 4096);
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 16384, 16384);
+ break;
default:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_old);
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 64, 8192);
+ break;
}
if (AES32 == hdspm->io_type) {
+ runtime->hw.rates |= SNDRV_PCM_RATE_KNOT;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&hdspm_hw_constraints_aes32_sample_rates);
} else {
return err;
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SONICVIBES,
- sonic->midi_port, MPU401_INFO_INTEGRATED,
- sonic->irq, 0,
- &midi_uart)) < 0) {
+ sonic->midi_port,
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &midi_uart)) < 0) {
snd_card_free(card);
return err;
}
if (trident->device != TRIDENT_DEVICE_ID_SI7018 &&
(err = snd_mpu401_uart_new(card, 0, MPU401_HW_TRID4DWAVE,
trident->midi_port,
- MPU401_INFO_INTEGRATED,
- trident->irq, 0, &trident->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &trident->rmidi)) < 0) {
snd_card_free(card);
return err;
}
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
struct via_rate_lock *ratep;
+ bool use_src = false;
runtime->hw = snd_via82xx_hw;
SNDRV_PCM_RATE_8000_48000);
runtime->hw.rate_min = 8000;
runtime->hw.rate_max = 48000;
+ use_src = true;
} else if (! ratep->rate) {
int idx = viadev->direction ? AC97_RATES_ADC : AC97_RATES_FRONT_DAC;
runtime->hw.rates = chip->ac97->rates[idx];
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
return err;
+ if (use_src) {
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0)
+ return err;
+ }
+
runtime->private_data = viadev;
viadev->substream = substream;
pci_write_config_byte(chip->pci, VIA_PNP_CONTROL, legacy_cfg);
if (chip->mpu_res) {
if (snd_mpu401_uart_new(chip->card, 0, MPU401_HW_VIA686A,
- mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ mpu_port, MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi) < 0) {
printk(KERN_WARNING "unable to initialize MPU-401"
" at 0x%lx, skipping\n", mpu_port);
legacy &= ~VIA_FUNC_ENABLE_MIDI;
if (chip->mpu_res) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI,
mpu_port[dev],
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rawmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rawmidi)) < 0) {
printk(KERN_WARNING "ymfpci: cannot initialize MPU401 at 0x%lx, skipping...\n", mpu_port[dev]);
legacy_ctrl &= ~YMFPCI_LEGACY_MIEN; /* disable MPU401 irq */
pci_write_config_word(pci, PCIR_DSXG_LEGACY, legacy_ctrl);
struct snd_ymfpci *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_ymfpci_pcm *ypcm;
+ int err;
+
+ runtime->hw = snd_ymfpci_playback;
+ /* FIXME? True value is 256/48 = 5.33333 ms */
+ err = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_TIME,
+ 5334, UINT_MAX);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0)
+ return err;
ypcm = kzalloc(sizeof(*ypcm), GFP_KERNEL);
if (ypcm == NULL)
ypcm->chip = chip;
ypcm->type = PLAYBACK_VOICE;
ypcm->substream = substream;
- runtime->hw = snd_ymfpci_playback;
runtime->private_data = ypcm;
runtime->private_free = snd_ymfpci_pcm_free_substream;
- /* FIXME? True value is 256/48 = 5.33333 ms */
- snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME, 5333, UINT_MAX);
return 0;
}
struct snd_ymfpci *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_ymfpci_pcm *ypcm;
+ int err;
+
+ runtime->hw = snd_ymfpci_capture;
+ /* FIXME? True value is 256/48 = 5.33333 ms */
+ err = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_TIME,
+ 5334, UINT_MAX);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0)
+ return err;
ypcm = kzalloc(sizeof(*ypcm), GFP_KERNEL);
if (ypcm == NULL)
ypcm->substream = substream;
ypcm->capture_bank_number = capture_bank_number;
chip->capture_substream[capture_bank_number] = substream;
- runtime->hw = snd_ymfpci_capture;
- /* FIXME? True value is 256/48 = 5.33333 ms */
- snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME, 5333, UINT_MAX);
runtime->private_data = ypcm;
runtime->private_free = snd_ymfpci_pcm_free_substream;
snd_ymfpci_hw_start(chip);
YMFPCI_DOUBLE("ADC Capture Volume", 0, YDSXGR_PRIADCLOOPVOL),
YMFPCI_DOUBLE("ADC Playback Volume", 1, YDSXGR_SECADCOUTVOL),
YMFPCI_DOUBLE("ADC Capture Volume", 1, YDSXGR_SECADCLOOPVOL),
-YMFPCI_DOUBLE("FM Legacy Volume", 0, YDSXGR_LEGACYOUTVOL),
+YMFPCI_DOUBLE("FM Legacy Playback Volume", 0, YDSXGR_LEGACYOUTVOL),
YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("AC97 ", PLAYBACK,VOLUME), 0, YDSXGR_ZVOUTVOL),
YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("", CAPTURE,VOLUME), 0, YDSXGR_ZVLOOPVOL),
YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("AC97 ",PLAYBACK,VOLUME), 1, YDSXGR_SPDIFOUTVOL),
static int keywest_remove(struct i2c_client *client)
{
- i2c_set_clientdata(client, NULL);
if (! keywest_ctx)
return 0;
if (client == keywest_ctx->client)
#
snd-usb-audio-objs := card.o \
+ clock.o \
+ endpoint.o \
+ format.o \
+ helper.o \
mixer.o \
mixer_quirks.o \
+ pcm.o \
proc.o \
quirks.o \
- format.o \
- endpoint.o \
- urb.o \
- pcm.o \
- helper.o \
- clock.o
+ stream.o
snd-usbmidi-lib-objs := midi.o
for (i = 0; i < N_URBS; i++) {
usb_kill_urb(dev->data_urbs_in[i]);
- usb_kill_urb(dev->data_urbs_out[i]);
+
+ if (test_bit(i, &dev->outurb_active_mask))
+ usb_kill_urb(dev->data_urbs_out[i]);
}
+
+ dev->outurb_active_mask = 0;
}
static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream)
{
struct snd_usb_caiaq_cb_info *info = urb->context;
struct snd_usb_caiaqdev *dev;
- struct urb *out;
- int frame, len, send_it = 0, outframe = 0;
+ struct urb *out = NULL;
+ int i, frame, len, send_it = 0, outframe = 0;
+ size_t offset = 0;
if (urb->status || !info)
return;
if (!dev->streaming)
return;
- out = dev->data_urbs_out[info->index];
+ /* find an unused output urb that is unused */
+ for (i = 0; i < N_URBS; i++)
+ if (test_and_set_bit(i, &dev->outurb_active_mask) == 0) {
+ out = dev->data_urbs_out[i];
+ break;
+ }
+
+ if (!out) {
+ log("Unable to find an output urb to use\n");
+ goto requeue;
+ }
/* read the recently received packet and send back one which has
* the same layout */
len = urb->iso_frame_desc[outframe].actual_length;
out->iso_frame_desc[outframe].length = len;
out->iso_frame_desc[outframe].actual_length = 0;
- out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
+ out->iso_frame_desc[outframe].offset = offset;
+ offset += len;
if (len > 0) {
spin_lock(&dev->spinlock);
}
if (send_it) {
- out->number_of_packets = FRAMES_PER_URB;
+ out->number_of_packets = outframe;
out->transfer_flags = URB_ISO_ASAP;
usb_submit_urb(out, GFP_ATOMIC);
+ } else {
+ struct snd_usb_caiaq_cb_info *oinfo = out->context;
+ clear_bit(oinfo->index, &dev->outurb_active_mask);
}
+requeue:
/* re-submit inbound urb */
for (frame = 0; frame < FRAMES_PER_URB; frame++) {
urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
dev->output_running = 1;
wake_up(&dev->prepare_wait_queue);
}
+
+ clear_bit(info->index, &dev->outurb_active_mask);
}
static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
if (!dev->data_cb_info)
return -ENOMEM;
+ dev->outurb_active_mask = 0;
+ BUILD_BUG_ON(N_URBS > (sizeof(dev->outurb_active_mask) * 8));
+
for (i = 0; i < N_URBS; i++) {
dev->data_cb_info[i].dev = dev;
dev->data_cb_info[i].index = i;
int input_panic, output_panic, warned;
char *audio_in_buf, *audio_out_buf;
unsigned int samplerates, bpp;
+ unsigned long outurb_active_mask;
struct snd_pcm_substream *sub_playback[MAX_STREAMS];
struct snd_pcm_substream *sub_capture[MAX_STREAMS];
static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
KEY_5, KEY_6, KEY_7 };
static unsigned short keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4,
- KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 };
+ KEY_5, KEY_6, KEY_7, KEY_8, KEY_9 };
static unsigned short keycode_kore[] = {
KEY_FN_F1, /* "menu" */
#include "helper.h"
#include "debug.h"
#include "pcm.h"
-#include "urb.h"
#include "format.h"
#include "power.h"
+#include "stream.h"
MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
MODULE_DESCRIPTION("USB Audio");
return -EINVAL;
}
- if (! snd_usb_parse_audio_endpoints(chip, interface)) {
+ if (! snd_usb_parse_audio_interface(chip, interface)) {
usb_set_interface(dev, interface, 0); /* reset the current interface */
usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
return -EINVAL;
spinlock_t lock;
struct snd_urb_ops ops; /* callbacks (must be filled at init) */
+ int last_frame_number; /* stored frame number */
+ int last_delay; /* stored delay */
};
struct snd_usb_stream {
*
*/
+#include <linux/gfp.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/audio.h>
-#include <linux/usb/audio-v2.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include "usbaudio.h"
+#include "helper.h"
#include "card.h"
-#include "proc.h"
-#include "quirks.h"
#include "endpoint.h"
-#include "urb.h"
#include "pcm.h"
-#include "helper.h"
-#include "format.h"
-#include "clock.h"
/*
- * free a substream
+ * convert a sampling rate into our full speed format (fs/1000 in Q16.16)
+ * this will overflow at approx 524 kHz
*/
-static void free_substream(struct snd_usb_substream *subs)
+static inline unsigned get_usb_full_speed_rate(unsigned int rate)
{
- struct list_head *p, *n;
-
- if (!subs->num_formats)
- return; /* not initialized */
- list_for_each_safe(p, n, &subs->fmt_list) {
- struct audioformat *fp = list_entry(p, struct audioformat, list);
- kfree(fp->rate_table);
- kfree(fp);
- }
- kfree(subs->rate_list.list);
+ return ((rate << 13) + 62) / 125;
}
+/*
+ * convert a sampling rate into USB high speed format (fs/8000 in Q16.16)
+ * this will overflow at approx 4 MHz
+ */
+static inline unsigned get_usb_high_speed_rate(unsigned int rate)
+{
+ return ((rate << 10) + 62) / 125;
+}
/*
- * free a usb stream instance
+ * unlink active urbs.
*/
-static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
+static int deactivate_urbs(struct snd_usb_substream *subs, int force, int can_sleep)
{
- free_substream(&stream->substream[0]);
- free_substream(&stream->substream[1]);
- list_del(&stream->list);
- kfree(stream);
+ struct snd_usb_audio *chip = subs->stream->chip;
+ unsigned int i;
+ int async;
+
+ subs->running = 0;
+
+ if (!force && subs->stream->chip->shutdown) /* to be sure... */
+ return -EBADFD;
+
+ async = !can_sleep && chip->async_unlink;
+
+ if (!async && in_interrupt())
+ return 0;
+
+ for (i = 0; i < subs->nurbs; i++) {
+ if (test_bit(i, &subs->active_mask)) {
+ if (!test_and_set_bit(i, &subs->unlink_mask)) {
+ struct urb *u = subs->dataurb[i].urb;
+ if (async)
+ usb_unlink_urb(u);
+ else
+ usb_kill_urb(u);
+ }
+ }
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ if (test_bit(i+16, &subs->active_mask)) {
+ if (!test_and_set_bit(i+16, &subs->unlink_mask)) {
+ struct urb *u = subs->syncurb[i].urb;
+ if (async)
+ usb_unlink_urb(u);
+ else
+ usb_kill_urb(u);
+ }
+ }
+ }
+ }
+ return 0;
}
-static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
+
+/*
+ * release a urb data
+ */
+static void release_urb_ctx(struct snd_urb_ctx *u)
{
- struct snd_usb_stream *stream = pcm->private_data;
- if (stream) {
- stream->pcm = NULL;
- snd_usb_audio_stream_free(stream);
+ if (u->urb) {
+ if (u->buffer_size)
+ usb_free_coherent(u->subs->dev, u->buffer_size,
+ u->urb->transfer_buffer,
+ u->urb->transfer_dma);
+ usb_free_urb(u->urb);
+ u->urb = NULL;
}
}
+/*
+ * wait until all urbs are processed.
+ */
+static int wait_clear_urbs(struct snd_usb_substream *subs)
+{
+ unsigned long end_time = jiffies + msecs_to_jiffies(1000);
+ unsigned int i;
+ int alive;
+
+ do {
+ alive = 0;
+ for (i = 0; i < subs->nurbs; i++) {
+ if (test_bit(i, &subs->active_mask))
+ alive++;
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ if (test_bit(i + 16, &subs->active_mask))
+ alive++;
+ }
+ }
+ if (! alive)
+ break;
+ schedule_timeout_uninterruptible(1);
+ } while (time_before(jiffies, end_time));
+ if (alive)
+ snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive);
+ return 0;
+}
/*
- * add this endpoint to the chip instance.
- * if a stream with the same endpoint already exists, append to it.
- * if not, create a new pcm stream.
+ * release a substream
*/
-int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct audioformat *fp)
+void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force)
{
- struct list_head *p;
- struct snd_usb_stream *as;
- struct snd_usb_substream *subs;
- struct snd_pcm *pcm;
- int err;
+ int i;
+
+ /* stop urbs (to be sure) */
+ deactivate_urbs(subs, force, 1);
+ wait_clear_urbs(subs);
+
+ for (i = 0; i < MAX_URBS; i++)
+ release_urb_ctx(&subs->dataurb[i]);
+ for (i = 0; i < SYNC_URBS; i++)
+ release_urb_ctx(&subs->syncurb[i]);
+ usb_free_coherent(subs->dev, SYNC_URBS * 4,
+ subs->syncbuf, subs->sync_dma);
+ subs->syncbuf = NULL;
+ subs->nurbs = 0;
+}
- list_for_each(p, &chip->pcm_list) {
- as = list_entry(p, struct snd_usb_stream, list);
- if (as->fmt_type != fp->fmt_type)
- continue;
- subs = &as->substream[stream];
- if (!subs->endpoint)
- continue;
- if (subs->endpoint == fp->endpoint) {
- list_add_tail(&fp->list, &subs->fmt_list);
- subs->num_formats++;
- subs->formats |= fp->formats;
- return 0;
+/*
+ * complete callback from data urb
+ */
+static void snd_complete_urb(struct urb *urb)
+{
+ struct snd_urb_ctx *ctx = urb->context;
+ struct snd_usb_substream *subs = ctx->subs;
+ struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
+ int err = 0;
+
+ if ((subs->running && subs->ops.retire(subs, substream->runtime, urb)) ||
+ !subs->running || /* can be stopped during retire callback */
+ (err = subs->ops.prepare(subs, substream->runtime, urb)) < 0 ||
+ (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ clear_bit(ctx->index, &subs->active_mask);
+ if (err < 0) {
+ snd_printd(KERN_ERR "cannot submit urb (err = %d)\n", err);
+ snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
}
}
- /* look for an empty stream */
- list_for_each(p, &chip->pcm_list) {
- as = list_entry(p, struct snd_usb_stream, list);
- if (as->fmt_type != fp->fmt_type)
- continue;
- subs = &as->substream[stream];
- if (subs->endpoint)
- continue;
- err = snd_pcm_new_stream(as->pcm, stream, 1);
- if (err < 0)
- return err;
- snd_usb_init_substream(as, stream, fp);
- return 0;
+}
+
+
+/*
+ * complete callback from sync urb
+ */
+static void snd_complete_sync_urb(struct urb *urb)
+{
+ struct snd_urb_ctx *ctx = urb->context;
+ struct snd_usb_substream *subs = ctx->subs;
+ struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
+ int err = 0;
+
+ if ((subs->running && subs->ops.retire_sync(subs, substream->runtime, urb)) ||
+ !subs->running || /* can be stopped during retire callback */
+ (err = subs->ops.prepare_sync(subs, substream->runtime, urb)) < 0 ||
+ (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ clear_bit(ctx->index + 16, &subs->active_mask);
+ if (err < 0) {
+ snd_printd(KERN_ERR "cannot submit sync urb (err = %d)\n", err);
+ snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+ }
}
+}
+
- /* create a new pcm */
- as = kzalloc(sizeof(*as), GFP_KERNEL);
- if (!as)
- return -ENOMEM;
- as->pcm_index = chip->pcm_devs;
- as->chip = chip;
- as->fmt_type = fp->fmt_type;
- err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
- stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
- stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
- &pcm);
- if (err < 0) {
- kfree(as);
- return err;
+/*
+ * initialize a substream for plaback/capture
+ */
+int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
+ unsigned int period_bytes,
+ unsigned int rate,
+ unsigned int frame_bits)
+{
+ unsigned int maxsize, i;
+ int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
+ unsigned int urb_packs, total_packs, packs_per_ms;
+ struct snd_usb_audio *chip = subs->stream->chip;
+
+ /* calculate the frequency in 16.16 format */
+ if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+ subs->freqn = get_usb_full_speed_rate(rate);
+ else
+ subs->freqn = get_usb_high_speed_rate(rate);
+ subs->freqm = subs->freqn;
+ subs->freqshift = INT_MIN;
+ /* calculate max. frequency */
+ if (subs->maxpacksize) {
+ /* whatever fits into a max. size packet */
+ maxsize = subs->maxpacksize;
+ subs->freqmax = (maxsize / (frame_bits >> 3))
+ << (16 - subs->datainterval);
+ } else {
+ /* no max. packet size: just take 25% higher than nominal */
+ subs->freqmax = subs->freqn + (subs->freqn >> 2);
+ maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3))
+ >> (16 - subs->datainterval);
}
- as->pcm = pcm;
- pcm->private_data = as;
- pcm->private_free = snd_usb_audio_pcm_free;
- pcm->info_flags = 0;
- if (chip->pcm_devs > 0)
- sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
+ subs->phase = 0;
+
+ if (subs->fill_max)
+ subs->curpacksize = subs->maxpacksize;
else
- strcpy(pcm->name, "USB Audio");
+ subs->curpacksize = maxsize;
- snd_usb_init_substream(as, stream, fp);
+ if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
+ packs_per_ms = 8 >> subs->datainterval;
+ else
+ packs_per_ms = 1;
+
+ if (is_playback) {
+ urb_packs = max(chip->nrpacks, 1);
+ urb_packs = min(urb_packs, (unsigned int)MAX_PACKS);
+ } else
+ urb_packs = 1;
+ urb_packs *= packs_per_ms;
+ if (subs->syncpipe)
+ urb_packs = min(urb_packs, 1U << subs->syncinterval);
+
+ /* decide how many packets to be used */
+ if (is_playback) {
+ unsigned int minsize, maxpacks;
+ /* determine how small a packet can be */
+ minsize = (subs->freqn >> (16 - subs->datainterval))
+ * (frame_bits >> 3);
+ /* with sync from device, assume it can be 12% lower */
+ if (subs->syncpipe)
+ minsize -= minsize >> 3;
+ minsize = max(minsize, 1u);
+ total_packs = (period_bytes + minsize - 1) / minsize;
+ /* we need at least two URBs for queueing */
+ if (total_packs < 2) {
+ total_packs = 2;
+ } else {
+ /* and we don't want too long a queue either */
+ maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
+ total_packs = min(total_packs, maxpacks);
+ }
+ } else {
+ while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
+ urb_packs >>= 1;
+ total_packs = MAX_URBS * urb_packs;
+ }
+ subs->nurbs = (total_packs + urb_packs - 1) / urb_packs;
+ if (subs->nurbs > MAX_URBS) {
+ /* too much... */
+ subs->nurbs = MAX_URBS;
+ total_packs = MAX_URBS * urb_packs;
+ } else if (subs->nurbs < 2) {
+ /* too little - we need at least two packets
+ * to ensure contiguous playback/capture
+ */
+ subs->nurbs = 2;
+ }
- list_add(&as->list, &chip->pcm_list);
- chip->pcm_devs++;
+ /* allocate and initialize data urbs */
+ for (i = 0; i < subs->nurbs; i++) {
+ struct snd_urb_ctx *u = &subs->dataurb[i];
+ u->index = i;
+ u->subs = subs;
+ u->packets = (i + 1) * total_packs / subs->nurbs
+ - i * total_packs / subs->nurbs;
+ u->buffer_size = maxsize * u->packets;
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II)
+ u->packets++; /* for transfer delimiter */
+ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
+ if (!u->urb)
+ goto out_of_memory;
+ u->urb->transfer_buffer =
+ usb_alloc_coherent(subs->dev, u->buffer_size,
+ GFP_KERNEL, &u->urb->transfer_dma);
+ if (!u->urb->transfer_buffer)
+ goto out_of_memory;
+ u->urb->pipe = subs->datapipe;
+ u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ u->urb->interval = 1 << subs->datainterval;
+ u->urb->context = u;
+ u->urb->complete = snd_complete_urb;
+ }
+
+ if (subs->syncpipe) {
+ /* allocate and initialize sync urbs */
+ subs->syncbuf = usb_alloc_coherent(subs->dev, SYNC_URBS * 4,
+ GFP_KERNEL, &subs->sync_dma);
+ if (!subs->syncbuf)
+ goto out_of_memory;
+ for (i = 0; i < SYNC_URBS; i++) {
+ struct snd_urb_ctx *u = &subs->syncurb[i];
+ u->index = i;
+ u->subs = subs;
+ u->packets = 1;
+ u->urb = usb_alloc_urb(1, GFP_KERNEL);
+ if (!u->urb)
+ goto out_of_memory;
+ u->urb->transfer_buffer = subs->syncbuf + i * 4;
+ u->urb->transfer_dma = subs->sync_dma + i * 4;
+ u->urb->transfer_buffer_length = 4;
+ u->urb->pipe = subs->syncpipe;
+ u->urb->transfer_flags = URB_ISO_ASAP |
+ URB_NO_TRANSFER_DMA_MAP;
+ u->urb->number_of_packets = 1;
+ u->urb->interval = 1 << subs->syncinterval;
+ u->urb->context = u;
+ u->urb->complete = snd_complete_sync_urb;
+ }
+ }
+ return 0;
- snd_usb_proc_pcm_format_add(as);
+out_of_memory:
+ snd_usb_release_substream_urbs(subs, 0);
+ return -ENOMEM;
+}
+/*
+ * prepare urb for full speed capture sync pipe
+ *
+ * fill the length and offset of each urb descriptor.
+ * the fixed 10.14 frequency is passed through the pipe.
+ */
+static int prepare_capture_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned char *cp = urb->transfer_buffer;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->iso_frame_desc[0].length = 3;
+ urb->iso_frame_desc[0].offset = 0;
+ cp[0] = subs->freqn >> 2;
+ cp[1] = subs->freqn >> 10;
+ cp[2] = subs->freqn >> 18;
return 0;
}
-static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
- struct usb_host_interface *alts,
- int protocol, int iface_no)
+/*
+ * prepare urb for high speed capture sync pipe
+ *
+ * fill the length and offset of each urb descriptor.
+ * the fixed 12.13 frequency is passed as 16.16 through the pipe.
+ */
+static int prepare_capture_sync_urb_hs(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
{
- /* parsed with a v1 header here. that's ok as we only look at the
- * header first which is the same for both versions */
- struct uac_iso_endpoint_descriptor *csep;
- struct usb_interface_descriptor *altsd = get_iface_desc(alts);
- int attributes = 0;
-
- csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
-
- /* Creamware Noah has this descriptor after the 2nd endpoint */
- if (!csep && altsd->bNumEndpoints >= 2)
- csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
-
- if (!csep || csep->bLength < 7 ||
- csep->bDescriptorSubtype != UAC_EP_GENERAL) {
- snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
- " class specific endpoint descriptor\n",
- chip->dev->devnum, iface_no,
- altsd->bAlternateSetting);
- return 0;
- }
+ unsigned char *cp = urb->transfer_buffer;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->iso_frame_desc[0].length = 4;
+ urb->iso_frame_desc[0].offset = 0;
+ cp[0] = subs->freqn;
+ cp[1] = subs->freqn >> 8;
+ cp[2] = subs->freqn >> 16;
+ cp[3] = subs->freqn >> 24;
+ return 0;
+}
- if (protocol == UAC_VERSION_1) {
- attributes = csep->bmAttributes;
- } else {
- struct uac2_iso_endpoint_descriptor *csep2 =
- (struct uac2_iso_endpoint_descriptor *) csep;
+/*
+ * process after capture sync complete
+ * - nothing to do
+ */
+static int retire_capture_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ return 0;
+}
- attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
+/*
+ * prepare urb for capture data pipe
+ *
+ * fill the offset and length of each descriptor.
+ *
+ * we use a temporary buffer to write the captured data.
+ * since the length of written data is determined by host, we cannot
+ * write onto the pcm buffer directly... the data is thus copied
+ * later at complete callback to the global buffer.
+ */
+static int prepare_capture_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ int i, offs;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ offs = 0;
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ for (i = 0; i < ctx->packets; i++) {
+ urb->iso_frame_desc[i].offset = offs;
+ urb->iso_frame_desc[i].length = subs->curpacksize;
+ offs += subs->curpacksize;
+ }
+ urb->transfer_buffer_length = offs;
+ urb->number_of_packets = ctx->packets;
+ return 0;
+}
- /* emulate the endpoint attributes of a v1 device */
- if (csep2->bmControls & UAC2_CONTROL_PITCH)
- attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
+/*
+ * process after capture complete
+ *
+ * copy the data from each desctiptor to the pcm buffer, and
+ * update the current position.
+ */
+static int retire_capture_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned long flags;
+ unsigned char *cp;
+ int i;
+ unsigned int stride, frames, bytes, oldptr;
+ int period_elapsed = 0;
+
+ stride = runtime->frame_bits >> 3;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ if (urb->iso_frame_desc[i].status) {
+ snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
+ // continue;
+ }
+ bytes = urb->iso_frame_desc[i].actual_length;
+ frames = bytes / stride;
+ if (!subs->txfr_quirk)
+ bytes = frames * stride;
+ if (bytes % (runtime->sample_bits >> 3) != 0) {
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+ int oldbytes = bytes;
+#endif
+ bytes = frames * stride;
+ snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
+ oldbytes, bytes);
+ }
+ /* update the current pointer */
+ spin_lock_irqsave(&subs->lock, flags);
+ oldptr = subs->hwptr_done;
+ subs->hwptr_done += bytes;
+ if (subs->hwptr_done >= runtime->buffer_size * stride)
+ subs->hwptr_done -= runtime->buffer_size * stride;
+ frames = (bytes + (oldptr % stride)) / stride;
+ subs->transfer_done += frames;
+ if (subs->transfer_done >= runtime->period_size) {
+ subs->transfer_done -= runtime->period_size;
+ period_elapsed = 1;
+ }
+ spin_unlock_irqrestore(&subs->lock, flags);
+ /* copy a data chunk */
+ if (oldptr + bytes > runtime->buffer_size * stride) {
+ unsigned int bytes1 =
+ runtime->buffer_size * stride - oldptr;
+ memcpy(runtime->dma_area + oldptr, cp, bytes1);
+ memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1);
+ } else {
+ memcpy(runtime->dma_area + oldptr, cp, bytes);
+ }
}
+ if (period_elapsed)
+ snd_pcm_period_elapsed(subs->pcm_substream);
+ return 0;
+}
- return attributes;
+/*
+ * Process after capture complete when paused. Nothing to do.
+ */
+static int retire_paused_capture_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ return 0;
}
-static struct uac2_input_terminal_descriptor *
- snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id)
+
+/*
+ * prepare urb for playback sync pipe
+ *
+ * set up the offset and length to receive the current frequency.
+ */
+static int prepare_playback_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
{
- struct uac2_input_terminal_descriptor *term = NULL;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->iso_frame_desc[0].length = min(4u, ctx->subs->syncmaxsize);
+ urb->iso_frame_desc[0].offset = 0;
+ return 0;
+}
- while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
- ctrl_iface->extralen,
- term, UAC_INPUT_TERMINAL))) {
- if (term->bTerminalID == terminal_id)
- return term;
+/*
+ * process after playback sync complete
+ *
+ * Full speed devices report feedback values in 10.14 format as samples per
+ * frame, high speed devices in 16.16 format as samples per microframe.
+ * Because the Audio Class 1 spec was written before USB 2.0, many high speed
+ * devices use a wrong interpretation, some others use an entirely different
+ * format. Therefore, we cannot predict what format any particular device uses
+ * and must detect it automatically.
+ */
+static int retire_playback_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned int f;
+ int shift;
+ unsigned long flags;
+
+ if (urb->iso_frame_desc[0].status != 0 ||
+ urb->iso_frame_desc[0].actual_length < 3)
+ return 0;
+
+ f = le32_to_cpup(urb->transfer_buffer);
+ if (urb->iso_frame_desc[0].actual_length == 3)
+ f &= 0x00ffffff;
+ else
+ f &= 0x0fffffff;
+ if (f == 0)
+ return 0;
+
+ if (unlikely(subs->freqshift == INT_MIN)) {
+ /*
+ * The first time we see a feedback value, determine its format
+ * by shifting it left or right until it matches the nominal
+ * frequency value. This assumes that the feedback does not
+ * differ from the nominal value more than +50% or -25%.
+ */
+ shift = 0;
+ while (f < subs->freqn - subs->freqn / 4) {
+ f <<= 1;
+ shift++;
+ }
+ while (f > subs->freqn + subs->freqn / 2) {
+ f >>= 1;
+ shift--;
+ }
+ subs->freqshift = shift;
+ }
+ else if (subs->freqshift >= 0)
+ f <<= subs->freqshift;
+ else
+ f >>= -subs->freqshift;
+
+ if (likely(f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax)) {
+ /*
+ * If the frequency looks valid, set it.
+ * This value is referred to in prepare_playback_urb().
+ */
+ spin_lock_irqsave(&subs->lock, flags);
+ subs->freqm = f;
+ spin_unlock_irqrestore(&subs->lock, flags);
+ } else {
+ /*
+ * Out of range; maybe the shift value is wrong.
+ * Reset it so that we autodetect again the next time.
+ */
+ subs->freqshift = INT_MIN;
}
- return NULL;
+ return 0;
}
-static struct uac2_output_terminal_descriptor *
- snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id)
+/* determine the number of frames in the next packet */
+static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
{
- struct uac2_output_terminal_descriptor *term = NULL;
-
- while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
- ctrl_iface->extralen,
- term, UAC_OUTPUT_TERMINAL))) {
- if (term->bTerminalID == terminal_id)
- return term;
+ if (subs->fill_max)
+ return subs->maxframesize;
+ else {
+ subs->phase = (subs->phase & 0xffff)
+ + (subs->freqm << subs->datainterval);
+ return min(subs->phase >> 16, subs->maxframesize);
}
+}
- return NULL;
+/*
+ * Prepare urb for streaming before playback starts or when paused.
+ *
+ * We don't have any data, so we send silence.
+ */
+static int prepare_nodata_playback_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned int i, offs, counts;
+ struct snd_urb_ctx *ctx = urb->context;
+ int stride = runtime->frame_bits >> 3;
+
+ offs = 0;
+ urb->dev = ctx->subs->dev;
+ for (i = 0; i < ctx->packets; ++i) {
+ counts = snd_usb_audio_next_packet_size(subs);
+ urb->iso_frame_desc[i].offset = offs * stride;
+ urb->iso_frame_desc[i].length = counts * stride;
+ offs += counts;
+ }
+ urb->number_of_packets = ctx->packets;
+ urb->transfer_buffer_length = offs * stride;
+ memset(urb->transfer_buffer,
+ runtime->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0,
+ offs * stride);
+ return 0;
}
-int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
+/*
+ * prepare urb for playback data pipe
+ *
+ * Since a URB can handle only a single linear buffer, we must use double
+ * buffering when the data to be transferred overflows the buffer boundary.
+ * To avoid inconsistencies when updating hwptr_done, we use double buffering
+ * for all URBs.
+ */
+static int prepare_playback_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
{
- struct usb_device *dev;
- struct usb_interface *iface;
- struct usb_host_interface *alts;
- struct usb_interface_descriptor *altsd;
- int i, altno, err, stream;
- int format = 0, num_channels = 0;
- struct audioformat *fp = NULL;
- int num, protocol, clock = 0;
- struct uac_format_type_i_continuous_descriptor *fmt;
+ int i, stride;
+ unsigned int counts, frames, bytes;
+ unsigned long flags;
+ int period_elapsed = 0;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ stride = runtime->frame_bits >> 3;
+
+ frames = 0;
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->number_of_packets = 0;
+ spin_lock_irqsave(&subs->lock, flags);
+ for (i = 0; i < ctx->packets; i++) {
+ counts = snd_usb_audio_next_packet_size(subs);
+ /* set up descriptor */
+ urb->iso_frame_desc[i].offset = frames * stride;
+ urb->iso_frame_desc[i].length = counts * stride;
+ frames += counts;
+ urb->number_of_packets++;
+ subs->transfer_done += counts;
+ if (subs->transfer_done >= runtime->period_size) {
+ subs->transfer_done -= runtime->period_size;
+ period_elapsed = 1;
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
+ if (subs->transfer_done > 0) {
+ /* FIXME: fill-max mode is not
+ * supported yet */
+ frames -= subs->transfer_done;
+ counts -= subs->transfer_done;
+ urb->iso_frame_desc[i].length =
+ counts * stride;
+ subs->transfer_done = 0;
+ }
+ i++;
+ if (i < ctx->packets) {
+ /* add a transfer delimiter */
+ urb->iso_frame_desc[i].offset =
+ frames * stride;
+ urb->iso_frame_desc[i].length = 0;
+ urb->number_of_packets++;
+ }
+ break;
+ }
+ }
+ if (period_elapsed) /* finish at the period boundary */
+ break;
+ }
+ bytes = frames * stride;
+ if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
+ /* err, the transferred area goes over buffer boundary. */
+ unsigned int bytes1 =
+ runtime->buffer_size * stride - subs->hwptr_done;
+ memcpy(urb->transfer_buffer,
+ runtime->dma_area + subs->hwptr_done, bytes1);
+ memcpy(urb->transfer_buffer + bytes1,
+ runtime->dma_area, bytes - bytes1);
+ } else {
+ memcpy(urb->transfer_buffer,
+ runtime->dma_area + subs->hwptr_done, bytes);
+ }
+ subs->hwptr_done += bytes;
+ if (subs->hwptr_done >= runtime->buffer_size * stride)
+ subs->hwptr_done -= runtime->buffer_size * stride;
+
+ /* update delay with exact number of samples queued */
+ runtime->delay = subs->last_delay;
+ runtime->delay += frames;
+ subs->last_delay = runtime->delay;
+
+ /* realign last_frame_number */
+ subs->last_frame_number = usb_get_current_frame_number(subs->dev);
+ subs->last_frame_number &= 0xFF; /* keep 8 LSBs */
+
+ spin_unlock_irqrestore(&subs->lock, flags);
+ urb->transfer_buffer_length = bytes;
+ if (period_elapsed)
+ snd_pcm_period_elapsed(subs->pcm_substream);
+ return 0;
+}
- dev = chip->dev;
+/*
+ * process after playback data complete
+ * - decrease the delay count again
+ */
+static int retire_playback_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned long flags;
+ int stride = runtime->frame_bits >> 3;
+ int processed = urb->transfer_buffer_length / stride;
+ int est_delay;
- /* parse the interface's altsettings */
- iface = usb_ifnum_to_if(dev, iface_no);
+ spin_lock_irqsave(&subs->lock, flags);
- num = iface->num_altsetting;
+ est_delay = snd_usb_pcm_delay(subs, runtime->rate);
+ /* update delay with exact number of samples played */
+ if (processed > subs->last_delay)
+ subs->last_delay = 0;
+ else
+ subs->last_delay -= processed;
+ runtime->delay = subs->last_delay;
/*
- * Dallas DS4201 workaround: It presents 5 altsettings, but the last
- * one misses syncpipe, and does not produce any sound.
+ * Report when delay estimate is off by more than 2ms.
+ * The error should be lower than 2ms since the estimate relies
+ * on two reads of a counter updated every ms.
*/
- if (chip->usb_id == USB_ID(0x04fa, 0x4201))
- num = 4;
-
- for (i = 0; i < num; i++) {
- alts = &iface->altsetting[i];
- altsd = get_iface_desc(alts);
- protocol = altsd->bInterfaceProtocol;
- /* skip invalid one */
- if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
- altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
- (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
- altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
- altsd->bNumEndpoints < 1 ||
- le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
- continue;
- /* must be isochronous */
- if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
- USB_ENDPOINT_XFER_ISOC)
- continue;
- /* check direction */
- stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
- SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- altno = altsd->bAlternateSetting;
-
- if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
- continue;
-
- /* get audio formats */
- switch (protocol) {
- default:
- snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
- dev->devnum, iface_no, altno, protocol);
- protocol = UAC_VERSION_1;
- /* fall through */
-
- case UAC_VERSION_1: {
- struct uac1_as_header_descriptor *as =
- snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
-
- if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
- continue;
- }
+ if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
+ snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n",
+ est_delay, subs->last_delay);
- if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
+ spin_unlock_irqrestore(&subs->lock, flags);
+ return 0;
+}
- format = le16_to_cpu(as->wFormatTag); /* remember the format value */
- break;
- }
+static const char *usb_error_string(int err)
+{
+ switch (err) {
+ case -ENODEV:
+ return "no device";
+ case -ENOENT:
+ return "endpoint not enabled";
+ case -EPIPE:
+ return "endpoint stalled";
+ case -ENOSPC:
+ return "not enough bandwidth";
+ case -ESHUTDOWN:
+ return "device disabled";
+ case -EHOSTUNREACH:
+ return "device suspended";
+ case -EINVAL:
+ case -EAGAIN:
+ case -EFBIG:
+ case -EMSGSIZE:
+ return "internal error";
+ default:
+ return "unknown error";
+ }
+}
- case UAC_VERSION_2: {
- struct uac2_input_terminal_descriptor *input_term;
- struct uac2_output_terminal_descriptor *output_term;
- struct uac2_as_header_descriptor *as =
- snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+/*
+ * set up and start data/sync urbs
+ */
+static int start_urbs(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime)
+{
+ unsigned int i;
+ int err;
- if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
- continue;
+ if (subs->stream->chip->shutdown)
+ return -EBADFD;
+
+ for (i = 0; i < subs->nurbs; i++) {
+ if (snd_BUG_ON(!subs->dataurb[i].urb))
+ return -EINVAL;
+ if (subs->ops.prepare(subs, runtime, subs->dataurb[i].urb) < 0) {
+ snd_printk(KERN_ERR "cannot prepare datapipe for urb %d\n", i);
+ goto __error;
+ }
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ if (snd_BUG_ON(!subs->syncurb[i].urb))
+ return -EINVAL;
+ if (subs->ops.prepare_sync(subs, runtime, subs->syncurb[i].urb) < 0) {
+ snd_printk(KERN_ERR "cannot prepare syncpipe for urb %d\n", i);
+ goto __error;
}
+ }
+ }
- if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
- continue;
+ subs->active_mask = 0;
+ subs->unlink_mask = 0;
+ subs->running = 1;
+ for (i = 0; i < subs->nurbs; i++) {
+ err = usb_submit_urb(subs->dataurb[i].urb, GFP_ATOMIC);
+ if (err < 0) {
+ snd_printk(KERN_ERR "cannot submit datapipe "
+ "for urb %d, error %d: %s\n",
+ i, err, usb_error_string(err));
+ goto __error;
+ }
+ set_bit(i, &subs->active_mask);
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ err = usb_submit_urb(subs->syncurb[i].urb, GFP_ATOMIC);
+ if (err < 0) {
+ snd_printk(KERN_ERR "cannot submit syncpipe "
+ "for urb %d, error %d: %s\n",
+ i, err, usb_error_string(err));
+ goto __error;
}
+ set_bit(i + 16, &subs->active_mask);
+ }
+ }
+ return 0;
- num_channels = as->bNrChannels;
- format = le32_to_cpu(as->bmFormats);
+ __error:
+ // snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN);
+ deactivate_urbs(subs, 0, 0);
+ return -EPIPE;
+}
- /* lookup the terminal associated to this interface
- * to extract the clock */
- input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
- if (input_term) {
- clock = input_term->bCSourceID;
- break;
- }
- output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
- if (output_term) {
- clock = output_term->bCSourceID;
- break;
- }
+/*
+ */
+static struct snd_urb_ops audio_urb_ops[2] = {
+ {
+ .prepare = prepare_nodata_playback_urb,
+ .retire = retire_playback_urb,
+ .prepare_sync = prepare_playback_sync_urb,
+ .retire_sync = retire_playback_sync_urb,
+ },
+ {
+ .prepare = prepare_capture_urb,
+ .retire = retire_capture_urb,
+ .prepare_sync = prepare_capture_sync_urb,
+ .retire_sync = retire_capture_sync_urb,
+ },
+};
- snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
- dev->devnum, iface_no, altno, as->bTerminalLink);
- continue;
- }
- }
+/*
+ * initialize the substream instance.
+ */
- /* get format type */
- fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
- if (!fmt) {
- snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
- if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
- ((protocol == UAC_VERSION_2) && (fmt->bLength != 6))) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
+void snd_usb_init_substream(struct snd_usb_stream *as,
+ int stream, struct audioformat *fp)
+{
+ struct snd_usb_substream *subs = &as->substream[stream];
+
+ INIT_LIST_HEAD(&subs->fmt_list);
+ spin_lock_init(&subs->lock);
+
+ subs->stream = as;
+ subs->direction = stream;
+ subs->dev = as->chip->dev;
+ subs->txfr_quirk = as->chip->txfr_quirk;
+ subs->ops = audio_urb_ops[stream];
+ if (snd_usb_get_speed(subs->dev) >= USB_SPEED_HIGH)
+ subs->ops.prepare_sync = prepare_capture_sync_urb_hs;
+
+ snd_usb_set_pcm_ops(as->pcm, stream);
+
+ list_add_tail(&fp->list, &subs->fmt_list);
+ subs->formats |= fp->formats;
+ subs->endpoint = fp->endpoint;
+ subs->num_formats++;
+ subs->fmt_type = fp->fmt_type;
+}
- /*
- * Blue Microphones workaround: The last altsetting is identical
- * with the previous one, except for a larger packet size, but
- * is actually a mislabeled two-channel setting; ignore it.
- */
- if (fmt->bNrChannels == 1 &&
- fmt->bSubframeSize == 2 &&
- altno == 2 && num == 3 &&
- fp && fp->altsetting == 1 && fp->channels == 1 &&
- fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
- protocol == UAC_VERSION_1 &&
- le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
- fp->maxpacksize * 2)
- continue;
-
- fp = kzalloc(sizeof(*fp), GFP_KERNEL);
- if (! fp) {
- snd_printk(KERN_ERR "cannot malloc\n");
- return -ENOMEM;
- }
+int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_usb_substream *subs = substream->runtime->private_data;
- fp->iface = iface_no;
- fp->altsetting = altno;
- fp->altset_idx = i;
- fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
- fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
- fp->datainterval = snd_usb_parse_datainterval(chip, alts);
- fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
- /* num_channels is only set for v2 interfaces */
- fp->channels = num_channels;
- if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
- fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
- * (fp->maxpacksize & 0x7ff);
- fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
- fp->clock = clock;
-
- /* some quirks for attributes here */
-
- switch (chip->usb_id) {
- case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
- /* Optoplay sets the sample rate attribute although
- * it seems not supporting it in fact.
- */
- fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
- break;
- case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
- case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
- /* doesn't set the sample rate attribute, but supports it */
- fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
- break;
- case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
- case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
- case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
- case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
- an older model 77d:223) */
- /*
- * plantronics headset and Griffin iMic have set adaptive-in
- * although it's really not...
- */
- fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
- if (stream == SNDRV_PCM_STREAM_PLAYBACK)
- fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
- else
- fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
- break;
- }
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ subs->ops.prepare = prepare_playback_urb;
+ return 0;
+ case SNDRV_PCM_TRIGGER_STOP:
+ return deactivate_urbs(subs, 0, 0);
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ subs->ops.prepare = prepare_nodata_playback_urb;
+ return 0;
+ }
- /* ok, let's parse further... */
- if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
- kfree(fp->rate_table);
- kfree(fp);
- fp = NULL;
- continue;
- }
+ return -EINVAL;
+}
- snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
- err = snd_usb_add_audio_endpoint(chip, stream, fp);
- if (err < 0) {
- kfree(fp->rate_table);
- kfree(fp);
- return err;
- }
- /* try to set the interface... */
- usb_set_interface(chip->dev, iface_no, altno);
- snd_usb_init_pitch(chip, iface_no, alts, fp);
- snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
+int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_usb_substream *subs = substream->runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ subs->ops.retire = retire_capture_urb;
+ return start_urbs(subs, substream->runtime);
+ case SNDRV_PCM_TRIGGER_STOP:
+ return deactivate_urbs(subs, 0, 0);
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ subs->ops.retire = retire_paused_capture_urb;
+ return 0;
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ subs->ops.retire = retire_capture_urb;
+ return 0;
}
+
+ return -EINVAL;
+}
+
+int snd_usb_substream_prepare(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime)
+{
+ /* clear urbs (to be sure) */
+ deactivate_urbs(subs, 0, 1);
+ wait_clear_urbs(subs);
+
+ /* for playback, submit the URBs now; otherwise, the first hwptr_done
+ * updates for all URBs would happen at the same time when starting */
+ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ subs->ops.prepare = prepare_nodata_playback_urb;
+ return start_urbs(subs, runtime);
+ }
+
return 0;
}
#ifndef __USBAUDIO_ENDPOINT_H
#define __USBAUDIO_ENDPOINT_H
-int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip,
- int iface_no);
+void snd_usb_init_substream(struct snd_usb_stream *as,
+ int stream,
+ struct audioformat *fp);
-int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip,
- int stream,
- struct audioformat *fp);
+int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
+ unsigned int period_bytes,
+ unsigned int rate,
+ unsigned int frame_bits);
+
+void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);
+
+int snd_usb_substream_prepare(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime);
+
+int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd);
+int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd);
#endif /* __USBAUDIO_ENDPOINT_H */
.output = snd_usbmidi_raw_output,
};
+/*
+ * FTDI protocol: raw MIDI bytes, but input packets have two modem status bytes.
+ */
+
+static void snd_usbmidi_ftdi_input(struct snd_usb_midi_in_endpoint* ep,
+ uint8_t* buffer, int buffer_length)
+{
+ if (buffer_length > 2)
+ snd_usbmidi_input_data(ep, 0, buffer + 2, buffer_length - 2);
+}
+
+static struct usb_protocol_ops snd_usbmidi_ftdi_ops = {
+ .input = snd_usbmidi_ftdi_input,
+ .output = snd_usbmidi_raw_output,
+};
+
static void snd_usbmidi_us122l_input(struct snd_usb_midi_in_endpoint *ep,
uint8_t *buffer, int buffer_length)
{
/* endpoint 1 is input-only */
endpoints[1].out_cables = 0;
break;
+ case QUIRK_MIDI_FTDI:
+ umidi->usb_protocol_ops = &snd_usbmidi_ftdi_ops;
+
+ /* set baud rate to 31250 (48 MHz / 16 / 96) */
+ err = usb_control_msg(umidi->dev, usb_sndctrlpipe(umidi->dev, 0),
+ 3, 0x40, 0x60, 0, NULL, 0, 1000);
+ if (err < 0)
+ break;
+
+ err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+ break;
default:
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
err = -ENXIO;
if (p && p->dB) {
cval->dBmin = p->dB->min;
cval->dBmax = p->dB->max;
+ cval->initialized = 1;
}
}
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
} else {
- if (! cval->initialized)
- get_min_max(cval, 0);
+ if (!cval->initialized) {
+ get_min_max(cval, 0);
+ if (cval->initialized && cval->dBmin >= cval->dBmax) {
+ kcontrol->vd[0].access &=
+ ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK);
+ snd_ctl_notify(cval->mixer->chip->card,
+ SNDRV_CTL_EVENT_MASK_INFO,
+ &kcontrol->id);
+ }
+ }
uinfo->value.integer.min = 0;
uinfo->value.integer.max =
(cval->max - cval->min + cval->res - 1) / cval->res;
" Switch" : " Volume");
if (control == UAC_FU_VOLUME) {
check_mapped_dB(map, cval);
- if (cval->dBmin < cval->dBmax) {
+ if (cval->dBmin < cval->dBmax || !cval->initialized) {
kctl->tlv.c = mixer_vol_tlv;
kctl->vd[0].access |=
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
if (state->mixer->protocol == UAC_VERSION_1) {
csize = hdr->bControlSize;
+ if (!csize) {
+ snd_printdd(KERN_ERR "usbaudio: unit %u: "
+ "invalid bControlSize == 0\n", unitid);
+ return -EINVAL;
+ }
channels = (hdr->bLength - 7) / csize - 1;
bmaControls = hdr->bmaControls;
} else {
struct mixer_build state;
int err;
const struct usbmix_ctl_map *map;
- struct usb_host_interface *hostif;
void *p;
- hostif = mixer->chip->ctrl_intf;
memset(&state, 0, sizeof(state));
state.chip = mixer->chip;
state.mixer = mixer;
- state.buffer = hostif->extra;
- state.buflen = hostif->extralen;
+ state.buffer = mixer->hostif->extra;
+ state.buflen = mixer->hostif->extralen;
/* check the mapping table */
for (map = usbmix_ctl_maps; map->id; map++) {
}
p = NULL;
- while ((p = snd_usb_find_csint_desc(hostif->extra, hostif->extralen, p, UAC_OUTPUT_TERMINAL)) != NULL) {
+ while ((p = snd_usb_find_csint_desc(mixer->hostif->extra, mixer->hostif->extralen,
+ p, UAC_OUTPUT_TERMINAL)) != NULL) {
if (mixer->protocol == UAC_VERSION_1) {
struct uac1_output_terminal_descriptor *desc = p;
/* create the handler for the optional status interrupt endpoint */
static int snd_usb_mixer_status_create(struct usb_mixer_interface *mixer)
{
- struct usb_host_interface *hostif;
struct usb_endpoint_descriptor *ep;
void *transfer_buffer;
int buffer_length;
unsigned int epnum;
- hostif = mixer->chip->ctrl_intf;
/* we need one interrupt input endpoint */
- if (get_iface_desc(hostif)->bNumEndpoints < 1)
+ if (get_iface_desc(mixer->hostif)->bNumEndpoints < 1)
return 0;
- ep = get_endpoint(hostif, 0);
+ ep = get_endpoint(mixer->hostif, 0);
if (!usb_endpoint_dir_in(ep) || !usb_endpoint_xfer_int(ep))
return 0;
};
struct usb_mixer_interface *mixer;
struct snd_info_entry *entry;
- struct usb_host_interface *host_iface;
int err;
strcpy(chip->card->mixername, "USB Mixer");
return -ENOMEM;
}
- host_iface = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0];
- switch (get_iface_desc(host_iface)->bInterfaceProtocol) {
+ mixer->hostif = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0];
+ switch (get_iface_desc(mixer->hostif)->bInterfaceProtocol) {
case UAC_VERSION_1:
default:
mixer->protocol = UAC_VERSION_1;
struct usb_mixer_interface {
struct snd_usb_audio *chip;
+ struct usb_host_interface *hostif;
struct list_head list;
unsigned int ignore_ctl_error;
struct urb *urb;
#include "card.h"
#include "quirks.h"
#include "debug.h"
-#include "urb.h"
+#include "endpoint.h"
#include "helper.h"
#include "pcm.h"
#include "clock.h"
#include "power.h"
+/* return the estimated delay based on USB frame counters */
+snd_pcm_uframes_t snd_usb_pcm_delay(struct snd_usb_substream *subs,
+ unsigned int rate)
+{
+ int current_frame_number;
+ int frame_diff;
+ int est_delay;
+
+ current_frame_number = usb_get_current_frame_number(subs->dev);
+ /*
+ * HCD implementations use different widths, use lower 8 bits.
+ * The delay will be managed up to 256ms, which is more than
+ * enough
+ */
+ frame_diff = (current_frame_number - subs->last_frame_number) & 0xff;
+
+ /* Approximation based on number of samples per USB frame (ms),
+ some truncation for 44.1 but the estimate is good enough */
+ est_delay = subs->last_delay - (frame_diff * rate / 1000);
+ if (est_delay < 0)
+ est_delay = 0;
+ return est_delay;
+}
+
/*
* return the current pcm pointer. just based on the hwptr_done value.
*/
subs = (struct snd_usb_substream *)substream->runtime->private_data;
spin_lock(&subs->lock);
hwptr_done = subs->hwptr_done;
+ substream->runtime->delay = snd_usb_pcm_delay(subs,
+ substream->runtime->rate);
spin_unlock(&subs->lock);
return hwptr_done / (substream->runtime->frame_bits >> 3);
}
subs->hwptr_done = 0;
subs->transfer_done = 0;
subs->phase = 0;
+ subs->last_delay = 0;
+ subs->last_frame_number = 0;
runtime->delay = 0;
return snd_usb_substream_prepare(subs, runtime);
#ifndef __USBAUDIO_PCM_H
#define __USBAUDIO_PCM_H
+snd_pcm_uframes_t snd_usb_pcm_delay(struct snd_usb_substream *subs,
+ unsigned int rate);
+
void snd_usb_set_pcm_ops(struct snd_pcm *pcm, int stream);
int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
.idProduct = prod, \
.bInterfaceClass = USB_CLASS_VENDOR_SPEC
+/* FTDI devices */
+{
+ USB_DEVICE(0x0403, 0xb8d8),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "STARR LABS", */
+ /* .product_name = "Starr Labs MIDI USB device", */
+ .ifnum = 0,
+ .type = QUIRK_MIDI_FTDI
+ }
+},
+
/* Creative/Toshiba Multimedia Center SB-0500 */
{
USB_DEVICE(0x041e, 0x3048),
}
}
},
+{
+ /* Added support for Roland UM-ONE which differs from UM-1 */
+ USB_DEVICE(0x0582, 0x012a),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "ROLAND", */
+ /* .product_name = "UM-ONE", */
+ .ifnum = 0,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0003
+ }
+ }
+},
{
USB_DEVICE(0x0582, 0x011e),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
}
}
},
+{
+ USB_DEVICE(0x0582, 0x0130),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "BOSS", */
+ /* .product_name = "MICRO BR-80", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Guillemot devices */
{
.idProduct = 0x1020,
},
+/* KeithMcMillen Stringport */
+{
+ USB_DEVICE(0x1f38, 0x0001),
+ .bInterfaceClass = USB_CLASS_AUDIO,
+},
+
/* Miditech devices */
{
USB_DEVICE(0x4752, 0x0011),
#include "endpoint.h"
#include "pcm.h"
#include "clock.h"
+#include "stream.h"
/*
* handle the quirks for the contained interfaces
alts = &iface->altsetting[0];
altsd = get_iface_desc(alts);
- err = snd_usb_parse_audio_endpoints(chip, altsd->bInterfaceNumber);
+ err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
if (err < 0) {
snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
altsd->bInterfaceNumber, err);
stream = (fp->endpoint & USB_DIR_IN)
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = snd_usb_add_audio_endpoint(chip, stream, fp);
+ err = snd_usb_add_audio_stream(chip, stream, fp);
if (err < 0) {
kfree(fp);
kfree(rate_table);
stream = (fp->endpoint & USB_DIR_IN)
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = snd_usb_add_audio_endpoint(chip, stream, fp);
+ err = snd_usb_add_audio_stream(chip, stream, fp);
if (err < 0) {
kfree(fp);
return err;
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
+ [QUIRK_MIDI_FTDI] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
*/
static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
{
- int err, reg;
+ int err = 0, reg;
int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "pcm.h"
+#include "helper.h"
+#include "format.h"
+#include "clock.h"
+#include "stream.h"
+
+/*
+ * free a substream
+ */
+static void free_substream(struct snd_usb_substream *subs)
+{
+ struct list_head *p, *n;
+
+ if (!subs->num_formats)
+ return; /* not initialized */
+ list_for_each_safe(p, n, &subs->fmt_list) {
+ struct audioformat *fp = list_entry(p, struct audioformat, list);
+ kfree(fp->rate_table);
+ kfree(fp);
+ }
+ kfree(subs->rate_list.list);
+}
+
+
+/*
+ * free a usb stream instance
+ */
+static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
+{
+ free_substream(&stream->substream[0]);
+ free_substream(&stream->substream[1]);
+ list_del(&stream->list);
+ kfree(stream);
+}
+
+static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_usb_stream *stream = pcm->private_data;
+ if (stream) {
+ stream->pcm = NULL;
+ snd_usb_audio_stream_free(stream);
+ }
+}
+
+
+/*
+ * add this endpoint to the chip instance.
+ * if a stream with the same endpoint already exists, append to it.
+ * if not, create a new pcm stream.
+ */
+int snd_usb_add_audio_stream(struct snd_usb_audio *chip,
+ int stream,
+ struct audioformat *fp)
+{
+ struct list_head *p;
+ struct snd_usb_stream *as;
+ struct snd_usb_substream *subs;
+ struct snd_pcm *pcm;
+ int err;
+
+ list_for_each(p, &chip->pcm_list) {
+ as = list_entry(p, struct snd_usb_stream, list);
+ if (as->fmt_type != fp->fmt_type)
+ continue;
+ subs = &as->substream[stream];
+ if (!subs->endpoint)
+ continue;
+ if (subs->endpoint == fp->endpoint) {
+ list_add_tail(&fp->list, &subs->fmt_list);
+ subs->num_formats++;
+ subs->formats |= fp->formats;
+ return 0;
+ }
+ }
+ /* look for an empty stream */
+ list_for_each(p, &chip->pcm_list) {
+ as = list_entry(p, struct snd_usb_stream, list);
+ if (as->fmt_type != fp->fmt_type)
+ continue;
+ subs = &as->substream[stream];
+ if (subs->endpoint)
+ continue;
+ err = snd_pcm_new_stream(as->pcm, stream, 1);
+ if (err < 0)
+ return err;
+ snd_usb_init_substream(as, stream, fp);
+ return 0;
+ }
+
+ /* create a new pcm */
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (!as)
+ return -ENOMEM;
+ as->pcm_index = chip->pcm_devs;
+ as->chip = chip;
+ as->fmt_type = fp->fmt_type;
+ err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
+ stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
+ stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
+ &pcm);
+ if (err < 0) {
+ kfree(as);
+ return err;
+ }
+ as->pcm = pcm;
+ pcm->private_data = as;
+ pcm->private_free = snd_usb_audio_pcm_free;
+ pcm->info_flags = 0;
+ if (chip->pcm_devs > 0)
+ sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
+ else
+ strcpy(pcm->name, "USB Audio");
+
+ snd_usb_init_substream(as, stream, fp);
+
+ list_add(&as->list, &chip->pcm_list);
+ chip->pcm_devs++;
+
+ snd_usb_proc_pcm_format_add(as);
+
+ return 0;
+}
+
+static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
+ struct usb_host_interface *alts,
+ int protocol, int iface_no)
+{
+ /* parsed with a v1 header here. that's ok as we only look at the
+ * header first which is the same for both versions */
+ struct uac_iso_endpoint_descriptor *csep;
+ struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+ int attributes = 0;
+
+ csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
+
+ /* Creamware Noah has this descriptor after the 2nd endpoint */
+ if (!csep && altsd->bNumEndpoints >= 2)
+ csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
+
+ if (!csep || csep->bLength < 7 ||
+ csep->bDescriptorSubtype != UAC_EP_GENERAL) {
+ snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
+ " class specific endpoint descriptor\n",
+ chip->dev->devnum, iface_no,
+ altsd->bAlternateSetting);
+ return 0;
+ }
+
+ if (protocol == UAC_VERSION_1) {
+ attributes = csep->bmAttributes;
+ } else {
+ struct uac2_iso_endpoint_descriptor *csep2 =
+ (struct uac2_iso_endpoint_descriptor *) csep;
+
+ attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
+
+ /* emulate the endpoint attributes of a v1 device */
+ if (csep2->bmControls & UAC2_CONTROL_PITCH)
+ attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
+ }
+
+ return attributes;
+}
+
+static struct uac2_input_terminal_descriptor *
+ snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_input_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_INPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+ snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_output_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_OUTPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
+{
+ struct usb_device *dev;
+ struct usb_interface *iface;
+ struct usb_host_interface *alts;
+ struct usb_interface_descriptor *altsd;
+ int i, altno, err, stream;
+ int format = 0, num_channels = 0;
+ struct audioformat *fp = NULL;
+ int num, protocol, clock = 0;
+ struct uac_format_type_i_continuous_descriptor *fmt;
+
+ dev = chip->dev;
+
+ /* parse the interface's altsettings */
+ iface = usb_ifnum_to_if(dev, iface_no);
+
+ num = iface->num_altsetting;
+
+ /*
+ * Dallas DS4201 workaround: It presents 5 altsettings, but the last
+ * one misses syncpipe, and does not produce any sound.
+ */
+ if (chip->usb_id == USB_ID(0x04fa, 0x4201))
+ num = 4;
+
+ for (i = 0; i < num; i++) {
+ alts = &iface->altsetting[i];
+ altsd = get_iface_desc(alts);
+ protocol = altsd->bInterfaceProtocol;
+ /* skip invalid one */
+ if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
+ altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
+ (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
+ altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
+ altsd->bNumEndpoints < 1 ||
+ le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
+ continue;
+ /* must be isochronous */
+ if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+ USB_ENDPOINT_XFER_ISOC)
+ continue;
+ /* check direction */
+ stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
+ SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+ altno = altsd->bAlternateSetting;
+
+ if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
+ continue;
+
+ /* get audio formats */
+ switch (protocol) {
+ default:
+ snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
+ dev->devnum, iface_no, altno, protocol);
+ protocol = UAC_VERSION_1;
+ /* fall through */
+
+ case UAC_VERSION_1: {
+ struct uac1_as_header_descriptor *as =
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+
+ if (!as) {
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ if (as->bLength < sizeof(*as)) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ format = le16_to_cpu(as->wFormatTag); /* remember the format value */
+ break;
+ }
+
+ case UAC_VERSION_2: {
+ struct uac2_input_terminal_descriptor *input_term;
+ struct uac2_output_terminal_descriptor *output_term;
+ struct uac2_as_header_descriptor *as =
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+
+ if (!as) {
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ if (as->bLength < sizeof(*as)) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ num_channels = as->bNrChannels;
+ format = le32_to_cpu(as->bmFormats);
+
+ /* lookup the terminal associated to this interface
+ * to extract the clock */
+ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (input_term) {
+ clock = input_term->bCSourceID;
+ break;
+ }
+
+ output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (output_term) {
+ clock = output_term->bCSourceID;
+ break;
+ }
+
+ snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+ dev->devnum, iface_no, altno, as->bTerminalLink);
+ continue;
+ }
+ }
+
+ /* get format type */
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
+ if (!fmt) {
+ snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+ if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
+ ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ /*
+ * Blue Microphones workaround: The last altsetting is identical
+ * with the previous one, except for a larger packet size, but
+ * is actually a mislabeled two-channel setting; ignore it.
+ */
+ if (fmt->bNrChannels == 1 &&
+ fmt->bSubframeSize == 2 &&
+ altno == 2 && num == 3 &&
+ fp && fp->altsetting == 1 && fp->channels == 1 &&
+ fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
+ protocol == UAC_VERSION_1 &&
+ le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
+ fp->maxpacksize * 2)
+ continue;
+
+ fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+ if (! fp) {
+ snd_printk(KERN_ERR "cannot malloc\n");
+ return -ENOMEM;
+ }
+
+ fp->iface = iface_no;
+ fp->altsetting = altno;
+ fp->altset_idx = i;
+ fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
+ fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
+ fp->datainterval = snd_usb_parse_datainterval(chip, alts);
+ fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+ /* num_channels is only set for v2 interfaces */
+ fp->channels = num_channels;
+ if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
+ fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
+ * (fp->maxpacksize & 0x7ff);
+ fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+ fp->clock = clock;
+
+ /* some quirks for attributes here */
+
+ switch (chip->usb_id) {
+ case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
+ /* Optoplay sets the sample rate attribute although
+ * it seems not supporting it in fact.
+ */
+ fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
+ break;
+ case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
+ case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
+ /* doesn't set the sample rate attribute, but supports it */
+ fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
+ break;
+ case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
+ case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
+ case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
+ case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
+ an older model 77d:223) */
+ /*
+ * plantronics headset and Griffin iMic have set adaptive-in
+ * although it's really not...
+ */
+ fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
+ else
+ fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
+ break;
+ }
+
+ /* ok, let's parse further... */
+ if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
+ kfree(fp->rate_table);
+ kfree(fp);
+ fp = NULL;
+ continue;
+ }
+
+ snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
+ err = snd_usb_add_audio_stream(chip, stream, fp);
+ if (err < 0) {
+ kfree(fp->rate_table);
+ kfree(fp);
+ return err;
+ }
+ /* try to set the interface... */
+ usb_set_interface(chip->dev, iface_no, altno);
+ snd_usb_init_pitch(chip, iface_no, alts, fp);
+ snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
+ }
+ return 0;
+}
+
--- /dev/null
+#ifndef __USBAUDIO_STREAM_H
+#define __USBAUDIO_STREAM_H
+
+int snd_usb_parse_audio_interface(struct snd_usb_audio *chip,
+ int iface_no);
+
+int snd_usb_add_audio_stream(struct snd_usb_audio *chip,
+ int stream,
+ struct audioformat *fp);
+
+#endif /* __USBAUDIO_STREAM_H */
+
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/usb.h>
-#include <linux/usb/audio.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-
-#include "usbaudio.h"
-#include "helper.h"
-#include "card.h"
-#include "urb.h"
-#include "pcm.h"
-
-/*
- * convert a sampling rate into our full speed format (fs/1000 in Q16.16)
- * this will overflow at approx 524 kHz
- */
-static inline unsigned get_usb_full_speed_rate(unsigned int rate)
-{
- return ((rate << 13) + 62) / 125;
-}
-
-/*
- * convert a sampling rate into USB high speed format (fs/8000 in Q16.16)
- * this will overflow at approx 4 MHz
- */
-static inline unsigned get_usb_high_speed_rate(unsigned int rate)
-{
- return ((rate << 10) + 62) / 125;
-}
-
-/*
- * unlink active urbs.
- */
-static int deactivate_urbs(struct snd_usb_substream *subs, int force, int can_sleep)
-{
- struct snd_usb_audio *chip = subs->stream->chip;
- unsigned int i;
- int async;
-
- subs->running = 0;
-
- if (!force && subs->stream->chip->shutdown) /* to be sure... */
- return -EBADFD;
-
- async = !can_sleep && chip->async_unlink;
-
- if (!async && in_interrupt())
- return 0;
-
- for (i = 0; i < subs->nurbs; i++) {
- if (test_bit(i, &subs->active_mask)) {
- if (!test_and_set_bit(i, &subs->unlink_mask)) {
- struct urb *u = subs->dataurb[i].urb;
- if (async)
- usb_unlink_urb(u);
- else
- usb_kill_urb(u);
- }
- }
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- if (test_bit(i+16, &subs->active_mask)) {
- if (!test_and_set_bit(i+16, &subs->unlink_mask)) {
- struct urb *u = subs->syncurb[i].urb;
- if (async)
- usb_unlink_urb(u);
- else
- usb_kill_urb(u);
- }
- }
- }
- }
- return 0;
-}
-
-
-/*
- * release a urb data
- */
-static void release_urb_ctx(struct snd_urb_ctx *u)
-{
- if (u->urb) {
- if (u->buffer_size)
- usb_free_coherent(u->subs->dev, u->buffer_size,
- u->urb->transfer_buffer,
- u->urb->transfer_dma);
- usb_free_urb(u->urb);
- u->urb = NULL;
- }
-}
-
-/*
- * wait until all urbs are processed.
- */
-static int wait_clear_urbs(struct snd_usb_substream *subs)
-{
- unsigned long end_time = jiffies + msecs_to_jiffies(1000);
- unsigned int i;
- int alive;
-
- do {
- alive = 0;
- for (i = 0; i < subs->nurbs; i++) {
- if (test_bit(i, &subs->active_mask))
- alive++;
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- if (test_bit(i + 16, &subs->active_mask))
- alive++;
- }
- }
- if (! alive)
- break;
- schedule_timeout_uninterruptible(1);
- } while (time_before(jiffies, end_time));
- if (alive)
- snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive);
- return 0;
-}
-
-/*
- * release a substream
- */
-void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force)
-{
- int i;
-
- /* stop urbs (to be sure) */
- deactivate_urbs(subs, force, 1);
- wait_clear_urbs(subs);
-
- for (i = 0; i < MAX_URBS; i++)
- release_urb_ctx(&subs->dataurb[i]);
- for (i = 0; i < SYNC_URBS; i++)
- release_urb_ctx(&subs->syncurb[i]);
- usb_free_coherent(subs->dev, SYNC_URBS * 4,
- subs->syncbuf, subs->sync_dma);
- subs->syncbuf = NULL;
- subs->nurbs = 0;
-}
-
-/*
- * complete callback from data urb
- */
-static void snd_complete_urb(struct urb *urb)
-{
- struct snd_urb_ctx *ctx = urb->context;
- struct snd_usb_substream *subs = ctx->subs;
- struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
- int err = 0;
-
- if ((subs->running && subs->ops.retire(subs, substream->runtime, urb)) ||
- !subs->running || /* can be stopped during retire callback */
- (err = subs->ops.prepare(subs, substream->runtime, urb)) < 0 ||
- (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- clear_bit(ctx->index, &subs->active_mask);
- if (err < 0) {
- snd_printd(KERN_ERR "cannot submit urb (err = %d)\n", err);
- snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- }
- }
-}
-
-
-/*
- * complete callback from sync urb
- */
-static void snd_complete_sync_urb(struct urb *urb)
-{
- struct snd_urb_ctx *ctx = urb->context;
- struct snd_usb_substream *subs = ctx->subs;
- struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
- int err = 0;
-
- if ((subs->running && subs->ops.retire_sync(subs, substream->runtime, urb)) ||
- !subs->running || /* can be stopped during retire callback */
- (err = subs->ops.prepare_sync(subs, substream->runtime, urb)) < 0 ||
- (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- clear_bit(ctx->index + 16, &subs->active_mask);
- if (err < 0) {
- snd_printd(KERN_ERR "cannot submit sync urb (err = %d)\n", err);
- snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- }
- }
-}
-
-
-/*
- * initialize a substream for plaback/capture
- */
-int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
- unsigned int period_bytes,
- unsigned int rate,
- unsigned int frame_bits)
-{
- unsigned int maxsize, i;
- int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
- unsigned int urb_packs, total_packs, packs_per_ms;
- struct snd_usb_audio *chip = subs->stream->chip;
-
- /* calculate the frequency in 16.16 format */
- if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
- subs->freqn = get_usb_full_speed_rate(rate);
- else
- subs->freqn = get_usb_high_speed_rate(rate);
- subs->freqm = subs->freqn;
- subs->freqshift = INT_MIN;
- /* calculate max. frequency */
- if (subs->maxpacksize) {
- /* whatever fits into a max. size packet */
- maxsize = subs->maxpacksize;
- subs->freqmax = (maxsize / (frame_bits >> 3))
- << (16 - subs->datainterval);
- } else {
- /* no max. packet size: just take 25% higher than nominal */
- subs->freqmax = subs->freqn + (subs->freqn >> 2);
- maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3))
- >> (16 - subs->datainterval);
- }
- subs->phase = 0;
-
- if (subs->fill_max)
- subs->curpacksize = subs->maxpacksize;
- else
- subs->curpacksize = maxsize;
-
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
- packs_per_ms = 8 >> subs->datainterval;
- else
- packs_per_ms = 1;
-
- if (is_playback) {
- urb_packs = max(chip->nrpacks, 1);
- urb_packs = min(urb_packs, (unsigned int)MAX_PACKS);
- } else
- urb_packs = 1;
- urb_packs *= packs_per_ms;
- if (subs->syncpipe)
- urb_packs = min(urb_packs, 1U << subs->syncinterval);
-
- /* decide how many packets to be used */
- if (is_playback) {
- unsigned int minsize, maxpacks;
- /* determine how small a packet can be */
- minsize = (subs->freqn >> (16 - subs->datainterval))
- * (frame_bits >> 3);
- /* with sync from device, assume it can be 12% lower */
- if (subs->syncpipe)
- minsize -= minsize >> 3;
- minsize = max(minsize, 1u);
- total_packs = (period_bytes + minsize - 1) / minsize;
- /* we need at least two URBs for queueing */
- if (total_packs < 2) {
- total_packs = 2;
- } else {
- /* and we don't want too long a queue either */
- maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
- total_packs = min(total_packs, maxpacks);
- }
- } else {
- while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
- urb_packs >>= 1;
- total_packs = MAX_URBS * urb_packs;
- }
- subs->nurbs = (total_packs + urb_packs - 1) / urb_packs;
- if (subs->nurbs > MAX_URBS) {
- /* too much... */
- subs->nurbs = MAX_URBS;
- total_packs = MAX_URBS * urb_packs;
- } else if (subs->nurbs < 2) {
- /* too little - we need at least two packets
- * to ensure contiguous playback/capture
- */
- subs->nurbs = 2;
- }
-
- /* allocate and initialize data urbs */
- for (i = 0; i < subs->nurbs; i++) {
- struct snd_urb_ctx *u = &subs->dataurb[i];
- u->index = i;
- u->subs = subs;
- u->packets = (i + 1) * total_packs / subs->nurbs
- - i * total_packs / subs->nurbs;
- u->buffer_size = maxsize * u->packets;
- if (subs->fmt_type == UAC_FORMAT_TYPE_II)
- u->packets++; /* for transfer delimiter */
- u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
- if (!u->urb)
- goto out_of_memory;
- u->urb->transfer_buffer =
- usb_alloc_coherent(subs->dev, u->buffer_size,
- GFP_KERNEL, &u->urb->transfer_dma);
- if (!u->urb->transfer_buffer)
- goto out_of_memory;
- u->urb->pipe = subs->datapipe;
- u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
- u->urb->interval = 1 << subs->datainterval;
- u->urb->context = u;
- u->urb->complete = snd_complete_urb;
- }
-
- if (subs->syncpipe) {
- /* allocate and initialize sync urbs */
- subs->syncbuf = usb_alloc_coherent(subs->dev, SYNC_URBS * 4,
- GFP_KERNEL, &subs->sync_dma);
- if (!subs->syncbuf)
- goto out_of_memory;
- for (i = 0; i < SYNC_URBS; i++) {
- struct snd_urb_ctx *u = &subs->syncurb[i];
- u->index = i;
- u->subs = subs;
- u->packets = 1;
- u->urb = usb_alloc_urb(1, GFP_KERNEL);
- if (!u->urb)
- goto out_of_memory;
- u->urb->transfer_buffer = subs->syncbuf + i * 4;
- u->urb->transfer_dma = subs->sync_dma + i * 4;
- u->urb->transfer_buffer_length = 4;
- u->urb->pipe = subs->syncpipe;
- u->urb->transfer_flags = URB_ISO_ASAP |
- URB_NO_TRANSFER_DMA_MAP;
- u->urb->number_of_packets = 1;
- u->urb->interval = 1 << subs->syncinterval;
- u->urb->context = u;
- u->urb->complete = snd_complete_sync_urb;
- }
- }
- return 0;
-
-out_of_memory:
- snd_usb_release_substream_urbs(subs, 0);
- return -ENOMEM;
-}
-
-/*
- * prepare urb for full speed capture sync pipe
- *
- * fill the length and offset of each urb descriptor.
- * the fixed 10.14 frequency is passed through the pipe.
- */
-static int prepare_capture_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned char *cp = urb->transfer_buffer;
- struct snd_urb_ctx *ctx = urb->context;
-
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->iso_frame_desc[0].length = 3;
- urb->iso_frame_desc[0].offset = 0;
- cp[0] = subs->freqn >> 2;
- cp[1] = subs->freqn >> 10;
- cp[2] = subs->freqn >> 18;
- return 0;
-}
-
-/*
- * prepare urb for high speed capture sync pipe
- *
- * fill the length and offset of each urb descriptor.
- * the fixed 12.13 frequency is passed as 16.16 through the pipe.
- */
-static int prepare_capture_sync_urb_hs(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned char *cp = urb->transfer_buffer;
- struct snd_urb_ctx *ctx = urb->context;
-
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->iso_frame_desc[0].length = 4;
- urb->iso_frame_desc[0].offset = 0;
- cp[0] = subs->freqn;
- cp[1] = subs->freqn >> 8;
- cp[2] = subs->freqn >> 16;
- cp[3] = subs->freqn >> 24;
- return 0;
-}
-
-/*
- * process after capture sync complete
- * - nothing to do
- */
-static int retire_capture_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- return 0;
-}
-
-/*
- * prepare urb for capture data pipe
- *
- * fill the offset and length of each descriptor.
- *
- * we use a temporary buffer to write the captured data.
- * since the length of written data is determined by host, we cannot
- * write onto the pcm buffer directly... the data is thus copied
- * later at complete callback to the global buffer.
- */
-static int prepare_capture_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- int i, offs;
- struct snd_urb_ctx *ctx = urb->context;
-
- offs = 0;
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- for (i = 0; i < ctx->packets; i++) {
- urb->iso_frame_desc[i].offset = offs;
- urb->iso_frame_desc[i].length = subs->curpacksize;
- offs += subs->curpacksize;
- }
- urb->transfer_buffer_length = offs;
- urb->number_of_packets = ctx->packets;
- return 0;
-}
-
-/*
- * process after capture complete
- *
- * copy the data from each desctiptor to the pcm buffer, and
- * update the current position.
- */
-static int retire_capture_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned long flags;
- unsigned char *cp;
- int i;
- unsigned int stride, frames, bytes, oldptr;
- int period_elapsed = 0;
-
- stride = runtime->frame_bits >> 3;
-
- for (i = 0; i < urb->number_of_packets; i++) {
- cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
- if (urb->iso_frame_desc[i].status) {
- snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
- // continue;
- }
- bytes = urb->iso_frame_desc[i].actual_length;
- frames = bytes / stride;
- if (!subs->txfr_quirk)
- bytes = frames * stride;
- if (bytes % (runtime->sample_bits >> 3) != 0) {
-#ifdef CONFIG_SND_DEBUG_VERBOSE
- int oldbytes = bytes;
-#endif
- bytes = frames * stride;
- snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
- oldbytes, bytes);
- }
- /* update the current pointer */
- spin_lock_irqsave(&subs->lock, flags);
- oldptr = subs->hwptr_done;
- subs->hwptr_done += bytes;
- if (subs->hwptr_done >= runtime->buffer_size * stride)
- subs->hwptr_done -= runtime->buffer_size * stride;
- frames = (bytes + (oldptr % stride)) / stride;
- subs->transfer_done += frames;
- if (subs->transfer_done >= runtime->period_size) {
- subs->transfer_done -= runtime->period_size;
- period_elapsed = 1;
- }
- spin_unlock_irqrestore(&subs->lock, flags);
- /* copy a data chunk */
- if (oldptr + bytes > runtime->buffer_size * stride) {
- unsigned int bytes1 =
- runtime->buffer_size * stride - oldptr;
- memcpy(runtime->dma_area + oldptr, cp, bytes1);
- memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1);
- } else {
- memcpy(runtime->dma_area + oldptr, cp, bytes);
- }
- }
- if (period_elapsed)
- snd_pcm_period_elapsed(subs->pcm_substream);
- return 0;
-}
-
-/*
- * Process after capture complete when paused. Nothing to do.
- */
-static int retire_paused_capture_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- return 0;
-}
-
-
-/*
- * prepare urb for playback sync pipe
- *
- * set up the offset and length to receive the current frequency.
- */
-static int prepare_playback_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- struct snd_urb_ctx *ctx = urb->context;
-
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->iso_frame_desc[0].length = min(4u, ctx->subs->syncmaxsize);
- urb->iso_frame_desc[0].offset = 0;
- return 0;
-}
-
-/*
- * process after playback sync complete
- *
- * Full speed devices report feedback values in 10.14 format as samples per
- * frame, high speed devices in 16.16 format as samples per microframe.
- * Because the Audio Class 1 spec was written before USB 2.0, many high speed
- * devices use a wrong interpretation, some others use an entirely different
- * format. Therefore, we cannot predict what format any particular device uses
- * and must detect it automatically.
- */
-static int retire_playback_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned int f;
- int shift;
- unsigned long flags;
-
- if (urb->iso_frame_desc[0].status != 0 ||
- urb->iso_frame_desc[0].actual_length < 3)
- return 0;
-
- f = le32_to_cpup(urb->transfer_buffer);
- if (urb->iso_frame_desc[0].actual_length == 3)
- f &= 0x00ffffff;
- else
- f &= 0x0fffffff;
- if (f == 0)
- return 0;
-
- if (unlikely(subs->freqshift == INT_MIN)) {
- /*
- * The first time we see a feedback value, determine its format
- * by shifting it left or right until it matches the nominal
- * frequency value. This assumes that the feedback does not
- * differ from the nominal value more than +50% or -25%.
- */
- shift = 0;
- while (f < subs->freqn - subs->freqn / 4) {
- f <<= 1;
- shift++;
- }
- while (f > subs->freqn + subs->freqn / 2) {
- f >>= 1;
- shift--;
- }
- subs->freqshift = shift;
- }
- else if (subs->freqshift >= 0)
- f <<= subs->freqshift;
- else
- f >>= -subs->freqshift;
-
- if (likely(f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax)) {
- /*
- * If the frequency looks valid, set it.
- * This value is referred to in prepare_playback_urb().
- */
- spin_lock_irqsave(&subs->lock, flags);
- subs->freqm = f;
- spin_unlock_irqrestore(&subs->lock, flags);
- } else {
- /*
- * Out of range; maybe the shift value is wrong.
- * Reset it so that we autodetect again the next time.
- */
- subs->freqshift = INT_MIN;
- }
-
- return 0;
-}
-
-/* determine the number of frames in the next packet */
-static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
-{
- if (subs->fill_max)
- return subs->maxframesize;
- else {
- subs->phase = (subs->phase & 0xffff)
- + (subs->freqm << subs->datainterval);
- return min(subs->phase >> 16, subs->maxframesize);
- }
-}
-
-/*
- * Prepare urb for streaming before playback starts or when paused.
- *
- * We don't have any data, so we send silence.
- */
-static int prepare_nodata_playback_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned int i, offs, counts;
- struct snd_urb_ctx *ctx = urb->context;
- int stride = runtime->frame_bits >> 3;
-
- offs = 0;
- urb->dev = ctx->subs->dev;
- for (i = 0; i < ctx->packets; ++i) {
- counts = snd_usb_audio_next_packet_size(subs);
- urb->iso_frame_desc[i].offset = offs * stride;
- urb->iso_frame_desc[i].length = counts * stride;
- offs += counts;
- }
- urb->number_of_packets = ctx->packets;
- urb->transfer_buffer_length = offs * stride;
- memset(urb->transfer_buffer,
- runtime->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0,
- offs * stride);
- return 0;
-}
-
-/*
- * prepare urb for playback data pipe
- *
- * Since a URB can handle only a single linear buffer, we must use double
- * buffering when the data to be transferred overflows the buffer boundary.
- * To avoid inconsistencies when updating hwptr_done, we use double buffering
- * for all URBs.
- */
-static int prepare_playback_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- int i, stride;
- unsigned int counts, frames, bytes;
- unsigned long flags;
- int period_elapsed = 0;
- struct snd_urb_ctx *ctx = urb->context;
-
- stride = runtime->frame_bits >> 3;
-
- frames = 0;
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->number_of_packets = 0;
- spin_lock_irqsave(&subs->lock, flags);
- for (i = 0; i < ctx->packets; i++) {
- counts = snd_usb_audio_next_packet_size(subs);
- /* set up descriptor */
- urb->iso_frame_desc[i].offset = frames * stride;
- urb->iso_frame_desc[i].length = counts * stride;
- frames += counts;
- urb->number_of_packets++;
- subs->transfer_done += counts;
- if (subs->transfer_done >= runtime->period_size) {
- subs->transfer_done -= runtime->period_size;
- period_elapsed = 1;
- if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
- if (subs->transfer_done > 0) {
- /* FIXME: fill-max mode is not
- * supported yet */
- frames -= subs->transfer_done;
- counts -= subs->transfer_done;
- urb->iso_frame_desc[i].length =
- counts * stride;
- subs->transfer_done = 0;
- }
- i++;
- if (i < ctx->packets) {
- /* add a transfer delimiter */
- urb->iso_frame_desc[i].offset =
- frames * stride;
- urb->iso_frame_desc[i].length = 0;
- urb->number_of_packets++;
- }
- break;
- }
- }
- if (period_elapsed) /* finish at the period boundary */
- break;
- }
- bytes = frames * stride;
- if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
- /* err, the transferred area goes over buffer boundary. */
- unsigned int bytes1 =
- runtime->buffer_size * stride - subs->hwptr_done;
- memcpy(urb->transfer_buffer,
- runtime->dma_area + subs->hwptr_done, bytes1);
- memcpy(urb->transfer_buffer + bytes1,
- runtime->dma_area, bytes - bytes1);
- } else {
- memcpy(urb->transfer_buffer,
- runtime->dma_area + subs->hwptr_done, bytes);
- }
- subs->hwptr_done += bytes;
- if (subs->hwptr_done >= runtime->buffer_size * stride)
- subs->hwptr_done -= runtime->buffer_size * stride;
- runtime->delay += frames;
- spin_unlock_irqrestore(&subs->lock, flags);
- urb->transfer_buffer_length = bytes;
- if (period_elapsed)
- snd_pcm_period_elapsed(subs->pcm_substream);
- return 0;
-}
-
-/*
- * process after playback data complete
- * - decrease the delay count again
- */
-static int retire_playback_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned long flags;
- int stride = runtime->frame_bits >> 3;
- int processed = urb->transfer_buffer_length / stride;
-
- spin_lock_irqsave(&subs->lock, flags);
- if (processed > runtime->delay)
- runtime->delay = 0;
- else
- runtime->delay -= processed;
- spin_unlock_irqrestore(&subs->lock, flags);
- return 0;
-}
-
-static const char *usb_error_string(int err)
-{
- switch (err) {
- case -ENODEV:
- return "no device";
- case -ENOENT:
- return "endpoint not enabled";
- case -EPIPE:
- return "endpoint stalled";
- case -ENOSPC:
- return "not enough bandwidth";
- case -ESHUTDOWN:
- return "device disabled";
- case -EHOSTUNREACH:
- return "device suspended";
- case -EINVAL:
- case -EAGAIN:
- case -EFBIG:
- case -EMSGSIZE:
- return "internal error";
- default:
- return "unknown error";
- }
-}
-
-/*
- * set up and start data/sync urbs
- */
-static int start_urbs(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime)
-{
- unsigned int i;
- int err;
-
- if (subs->stream->chip->shutdown)
- return -EBADFD;
-
- for (i = 0; i < subs->nurbs; i++) {
- if (snd_BUG_ON(!subs->dataurb[i].urb))
- return -EINVAL;
- if (subs->ops.prepare(subs, runtime, subs->dataurb[i].urb) < 0) {
- snd_printk(KERN_ERR "cannot prepare datapipe for urb %d\n", i);
- goto __error;
- }
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- if (snd_BUG_ON(!subs->syncurb[i].urb))
- return -EINVAL;
- if (subs->ops.prepare_sync(subs, runtime, subs->syncurb[i].urb) < 0) {
- snd_printk(KERN_ERR "cannot prepare syncpipe for urb %d\n", i);
- goto __error;
- }
- }
- }
-
- subs->active_mask = 0;
- subs->unlink_mask = 0;
- subs->running = 1;
- for (i = 0; i < subs->nurbs; i++) {
- err = usb_submit_urb(subs->dataurb[i].urb, GFP_ATOMIC);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot submit datapipe "
- "for urb %d, error %d: %s\n",
- i, err, usb_error_string(err));
- goto __error;
- }
- set_bit(i, &subs->active_mask);
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- err = usb_submit_urb(subs->syncurb[i].urb, GFP_ATOMIC);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot submit syncpipe "
- "for urb %d, error %d: %s\n",
- i, err, usb_error_string(err));
- goto __error;
- }
- set_bit(i + 16, &subs->active_mask);
- }
- }
- return 0;
-
- __error:
- // snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN);
- deactivate_urbs(subs, 0, 0);
- return -EPIPE;
-}
-
-
-/*
- */
-static struct snd_urb_ops audio_urb_ops[2] = {
- {
- .prepare = prepare_nodata_playback_urb,
- .retire = retire_playback_urb,
- .prepare_sync = prepare_playback_sync_urb,
- .retire_sync = retire_playback_sync_urb,
- },
- {
- .prepare = prepare_capture_urb,
- .retire = retire_capture_urb,
- .prepare_sync = prepare_capture_sync_urb,
- .retire_sync = retire_capture_sync_urb,
- },
-};
-
-/*
- * initialize the substream instance.
- */
-
-void snd_usb_init_substream(struct snd_usb_stream *as,
- int stream, struct audioformat *fp)
-{
- struct snd_usb_substream *subs = &as->substream[stream];
-
- INIT_LIST_HEAD(&subs->fmt_list);
- spin_lock_init(&subs->lock);
-
- subs->stream = as;
- subs->direction = stream;
- subs->dev = as->chip->dev;
- subs->txfr_quirk = as->chip->txfr_quirk;
- subs->ops = audio_urb_ops[stream];
- if (snd_usb_get_speed(subs->dev) >= USB_SPEED_HIGH)
- subs->ops.prepare_sync = prepare_capture_sync_urb_hs;
-
- snd_usb_set_pcm_ops(as->pcm, stream);
-
- list_add_tail(&fp->list, &subs->fmt_list);
- subs->formats |= fp->formats;
- subs->endpoint = fp->endpoint;
- subs->num_formats++;
- subs->fmt_type = fp->fmt_type;
-}
-
-int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_usb_substream *subs = substream->runtime->private_data;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- subs->ops.prepare = prepare_playback_urb;
- return 0;
- case SNDRV_PCM_TRIGGER_STOP:
- return deactivate_urbs(subs, 0, 0);
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- subs->ops.prepare = prepare_nodata_playback_urb;
- return 0;
- }
-
- return -EINVAL;
-}
-
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_usb_substream *subs = substream->runtime->private_data;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- subs->ops.retire = retire_capture_urb;
- return start_urbs(subs, substream->runtime);
- case SNDRV_PCM_TRIGGER_STOP:
- return deactivate_urbs(subs, 0, 0);
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- subs->ops.retire = retire_paused_capture_urb;
- return 0;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- subs->ops.retire = retire_capture_urb;
- return 0;
- }
-
- return -EINVAL;
-}
-
-int snd_usb_substream_prepare(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime)
-{
- /* clear urbs (to be sure) */
- deactivate_urbs(subs, 0, 1);
- wait_clear_urbs(subs);
-
- /* for playback, submit the URBs now; otherwise, the first hwptr_done
- * updates for all URBs would happen at the same time when starting */
- if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
- subs->ops.prepare = prepare_nodata_playback_urb;
- return start_urbs(subs, runtime);
- }
-
- return 0;
-}
-
+++ /dev/null
-#ifndef __USBAUDIO_URB_H
-#define __USBAUDIO_URB_H
-
-void snd_usb_init_substream(struct snd_usb_stream *as,
- int stream,
- struct audioformat *fp);
-
-int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
- unsigned int period_bytes,
- unsigned int rate,
- unsigned int frame_bits);
-
-void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);
-
-int snd_usb_substream_prepare(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime);
-
-int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd);
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd);
-
-#endif /* __USBAUDIO_URB_H */
QUIRK_MIDI_CME,
QUIRK_MIDI_AKAI,
QUIRK_MIDI_US122L,
+ QUIRK_MIDI_FTDI,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UAXX,
git.openpandora.org / pandora-kernel.git / commitdiff