return data;
}
-#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
-struct eth_priv_t eth_priv_cfg[] = {
- {
- .int_name = "K2E_EMAC0",
- .rx_flow = 0,
- .phy_addr = 0,
- .slave_port = 1,
- .sgmii_link_type = SGMII_LINK_MAC_PHY,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC1",
- .rx_flow = 8,
- .phy_addr = 1,
- .slave_port = 2,
- .sgmii_link_type = SGMII_LINK_MAC_PHY,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC2",
- .rx_flow = 16,
- .phy_addr = 2,
- .slave_port = 3,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC3",
- .rx_flow = 24,
- .phy_addr = 3,
- .slave_port = 4,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC4",
- .rx_flow = 32,
- .phy_addr = 4,
- .slave_port = 5,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC5",
- .rx_flow = 40,
- .phy_addr = 5,
- .slave_port = 6,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC6",
- .rx_flow = 48,
- .phy_addr = 6,
- .slave_port = 7,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
- {
- .int_name = "K2E_EMAC7",
- .rx_flow = 56,
- .phy_addr = 7,
- .slave_port = 8,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- .phy_if = PHY_INTERFACE_MODE_SGMII,
- },
-};
-
-int get_num_eth_ports(void)
-{
- return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
-}
-#endif
-
#if defined(CONFIG_MULTI_DTB_FIT)
int board_fit_config_name_match(const char *name)
{
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_DM_ETH
-unsigned int emac_open;
-static struct mii_dev *mdio_bus;
-static unsigned int sys_has_mdio = 1;
-#endif
-
#ifdef KEYSTONE2_EMAC_GIG_ENABLE
#define emac_gigabit_enable(x) keystone2_eth_gigabit_enable(x)
#else
static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16);
-#ifndef CONFIG_DM_ETH
-struct rx_buff_desc net_rx_buffs = {
- .buff_ptr = rx_buffs,
- .num_buffs = RX_BUFF_NUMS,
- .buff_len = RX_BUFF_LEN,
- .rx_flow = 22,
-};
-#endif
-
-#ifdef CONFIG_DM_ETH
-
enum link_type {
LINK_TYPE_SGMII_MAC_TO_MAC_AUTO = 0,
LINK_TYPE_SGMII_MAC_TO_PHY_MODE = 1,
#define DEVICE_EMACSW_BASE(base, x) ((base) + EMAC_EMACSW_PORT_BASE_OFS + \
(x) * 0x30)
-#elif defined CONFIG_KSNET_NETCP_V1_5
+#elif defined(CONFIG_KSNET_NETCP_V1_5)
#define EMAC_EMACSW_PORT_BASE_OFS 0x222000
bool emac_open;
bool has_mdio;
};
-#endif
/* MDIO */
return 0;
}
-#ifndef CONFIG_DM_ETH
-static void __attribute__((unused))
- keystone2_eth_gigabit_enable(struct eth_device *dev)
-{
- u_int16_t data;
- struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
-
- if (sys_has_mdio) {
- data = keystone2_mdio_read(mdio_bus, eth_priv->phy_addr,
- MDIO_DEVAD_NONE, 0);
- /* speed selection MSB */
- if (!(data & (1 << 6)))
- return;
- }
-
- /*
- * Check if link detected is giga-bit
- * If Gigabit mode detected, enable gigbit in MAC
- */
- writel(readl(DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) +
- CPGMACSL_REG_CTL) |
- EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
- DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) + CPGMACSL_REG_CTL);
-}
-#else
static void __attribute__((unused))
keystone2_eth_gigabit_enable(struct udevice *dev)
{
EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
DEVICE_EMACSL_BASE(priv->slave_port - 1) + CPGMACSL_REG_CTL);
}
-#endif
#ifdef CONFIG_SOC_K2G
int keystone_rgmii_config(struct phy_device *phy_dev)
}
#endif
-#ifndef CONFIG_DM_ETH
-
-int keystone2_eth_read_mac_addr(struct eth_device *dev)
-{
- struct eth_priv_t *eth_priv;
- u32 maca = 0;
- u32 macb = 0;
-
- eth_priv = (struct eth_priv_t *)dev->priv;
-
- /* Read the e-fuse mac address */
- if (eth_priv->slave_port == 1) {
- maca = __raw_readl(MAC_ID_BASE_ADDR);
- macb = __raw_readl(MAC_ID_BASE_ADDR + 4);
- }
-
- dev->enetaddr[0] = (macb >> 8) & 0xff;
- dev->enetaddr[1] = (macb >> 0) & 0xff;
- dev->enetaddr[2] = (maca >> 24) & 0xff;
- dev->enetaddr[3] = (maca >> 16) & 0xff;
- dev->enetaddr[4] = (maca >> 8) & 0xff;
- dev->enetaddr[5] = (maca >> 0) & 0xff;
-
- return 0;
-}
-
-int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
-{
- if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
- num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
-
- return ksnav_send(&netcp_pktdma, buffer,
- num_bytes, (slave_port_num) << 16);
-}
-
-/* Eth device open */
-static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
-{
- struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
- struct phy_device *phy_dev = eth_priv->phy_dev;
-
- debug("+ emac_open\n");
-
- net_rx_buffs.rx_flow = eth_priv->rx_flow;
-
- sys_has_mdio =
- (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
-
- if (sys_has_mdio)
- keystone2_mdio_reset(mdio_bus);
-
-#ifdef CONFIG_SOC_K2G
- keystone_rgmii_config(phy_dev);
-#else
- keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1,
- eth_priv->sgmii_link_type);
-#endif
-
- udelay(10000);
-
- /* On chip switch configuration */
- ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE);
-
- /* TODO: add error handling code */
- if (qm_init()) {
- printf("ERROR: qm_init()\n");
- return -1;
- }
- if (ksnav_init(&netcp_pktdma, &net_rx_buffs)) {
- qm_close();
- printf("ERROR: netcp_init()\n");
- return -1;
- }
-
- /*
- * Streaming switch configuration. If not present this
- * statement is defined to void in target.h.
- * If present this is usually defined to a series of register writes
- */
- hw_config_streaming_switch();
-
- if (sys_has_mdio) {
- keystone2_mdio_reset(mdio_bus);
-
- phy_startup(phy_dev);
- if (phy_dev->link == 0) {
- ksnav_close(&netcp_pktdma);
- qm_close();
- return -1;
- }
- }
-
- emac_gigabit_enable(dev);
-
- ethss_start();
-
- debug("- emac_open\n");
-
- emac_open = 1;
-
- return 0;
-}
-
-/* Eth device close */
-void keystone2_eth_close(struct eth_device *dev)
-{
- struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
- struct phy_device *phy_dev = eth_priv->phy_dev;
-
- debug("+ emac_close\n");
-
- if (!emac_open)
- return;
-
- ethss_stop();
-
- ksnav_close(&netcp_pktdma);
- qm_close();
- phy_shutdown(phy_dev);
-
- emac_open = 0;
-
- debug("- emac_close\n");
-}
-
-/*
- * This function sends a single packet on the network and returns
- * positive number (number of bytes transmitted) or negative for error
- */
-static int keystone2_eth_send_packet(struct eth_device *dev,
- void *packet, int length)
-{
- int ret_status = -1;
- struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
- struct phy_device *phy_dev = eth_priv->phy_dev;
-
- genphy_update_link(phy_dev);
- if (phy_dev->link == 0)
- return -1;
-
- if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0)
- return ret_status;
-
- return length;
-}
-
-/*
- * This function handles receipt of a packet from the network
- */
-static int keystone2_eth_rcv_packet(struct eth_device *dev)
-{
- void *hd;
- int pkt_size;
- u32 *pkt;
-
- hd = ksnav_recv(&netcp_pktdma, &pkt, &pkt_size);
- if (hd == NULL)
- return 0;
-
- net_process_received_packet((uchar *)pkt, pkt_size);
-
- ksnav_release_rxhd(&netcp_pktdma, hd);
-
- return pkt_size;
-}
-
-#ifdef CONFIG_MCAST_TFTP
-static int keystone2_eth_bcast_addr(struct eth_device *dev, u32 ip, u8 set)
-{
- return 0;
-}
-#endif
-
-/*
- * This function initializes the EMAC hardware.
- */
-int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
-{
- int res;
- struct eth_device *dev;
- struct phy_device *phy_dev;
- struct mdio_regs *adap_mdio = (struct mdio_regs *)EMAC_MDIO_BASE_ADDR;
-
- dev = malloc(sizeof(struct eth_device));
- if (dev == NULL)
- return -1;
-
- memset(dev, 0, sizeof(struct eth_device));
-
- strcpy(dev->name, eth_priv->int_name);
- dev->priv = eth_priv;
-
- keystone2_eth_read_mac_addr(dev);
-
- dev->iobase = 0;
- dev->init = keystone2_eth_open;
- dev->halt = keystone2_eth_close;
- dev->send = keystone2_eth_send_packet;
- dev->recv = keystone2_eth_rcv_packet;
-#ifdef CONFIG_MCAST_TFTP
- dev->mcast = keystone2_eth_bcast_addr;
-#endif
-
- eth_register(dev);
-
- /* Register MDIO bus if it's not registered yet */
- if (!mdio_bus) {
- mdio_bus = mdio_alloc();
- mdio_bus->read = keystone2_mdio_read;
- mdio_bus->write = keystone2_mdio_write;
- mdio_bus->reset = keystone2_mdio_reset;
- mdio_bus->priv = (void *)EMAC_MDIO_BASE_ADDR;
- strcpy(mdio_bus->name, "ethernet-mdio");
-
- res = mdio_register(mdio_bus);
- if (res)
- return res;
- }
-
-#ifndef CONFIG_SOC_K2G
- keystone2_net_serdes_setup();
-#endif
-
- /* Create phy device and bind it with driver */
-#ifdef CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
- phy_dev = phy_connect(mdio_bus, eth_priv->phy_addr,
- dev, eth_priv->phy_if);
- phy_config(phy_dev);
-#else
- phy_dev = phy_find_by_mask(mdio_bus, 1 << eth_priv->phy_addr,
- eth_priv->phy_if);
- phy_dev->dev = dev;
-#endif
- eth_priv->phy_dev = phy_dev;
-
- return 0;
-}
-
-#else
-
static int ks2_eth_start(struct udevice *dev)
{
struct ks2_eth_priv *priv = dev_get_priv(dev);
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
-#endif
git.openpandora.org / pandora-u-boot.git / commitdiff