arm: apple: Point stdout-path to framebuffer when keyboard present

Unless you have a spare Apple Silicon machine, getting access to
the serial port on Apple Silicon machines requires special
hardware. Given that most machines come with a built-in screen
the framebuffer is likely to be the most convenient output device
for most users. While U-Boot will output to both serial and
framebuffer, OSes might not. Therefore set stdout-path to point
at /chosen/framebuffer when a keyboard is connected to the machine.

This behaviour can be overridden by setting the "stdout" variable
in the U-Boot environment. I addition to that keep the serial
console as the default when running under the m1n1 hypervisor.
The m1n1 hypervisor virtualizes the serial port such that it
can be easily accessed from any other machine with a USB port.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Tested-by: Janne Grunau <j@jannau.net>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3243bd0..57946f6 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1021,6 +1021,7 @@ config ARCH_APPLE
        select DM_VIDEO
        select IOMMU
        select LINUX_KERNEL_IMAGE_HEADER
+       select OF_BOARD_SETUP
        select OF_CONTROL
        select PINCTRL
        select POSITION_INDEPENDENT

diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
index ffc1301..1525a9e 100644 (file)
--- a/arch/arm/mach-apple/board.c
+++ b/arch/arm/mach-apple/board.c
@@ -5,6 +5,7 @@
 
 #include <common.h>
 #include <dm.h>
+#include <dm/uclass-internal.h>
 #include <efi_loader.h>
 #include <lmb.h>
 
@@ -461,3 +462,42 @@ int board_late_init(void)
 
        return 0;
 }
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+       struct udevice *dev;
+       const char *stdoutname;
+       int node, ret;
+
+       /*
+        * Modify the "stdout-path" property under "/chosen" to point
+        * at "/chosen/framebuffer if a keyboard is available and
+        * we're not running under the m1n1 hypervisor.
+        * Developers can override this behaviour by dropping
+        * "vidconsole" from the "stdout" environment variable.
+        */
+
+       /* EL1 means we're running under the m1n1 hypervisor. */
+       if (current_el() == 1)
+               return 0;
+
+       ret = uclass_find_device(UCLASS_KEYBOARD, 0, &dev);
+       if (ret < 0)
+               return 0;
+
+       stdoutname = env_get("stdout");
+       if (!stdoutname || !strstr(stdoutname, "vidconsole"))
+               return 0;
+
+       /* Make sure we actually have a framebuffer. */
+       node = fdt_path_offset(blob, "/chosen/framebuffer");
+       if (node < 0 || !fdtdec_get_is_enabled(blob, node))
+               return 0;
+
+       node = fdt_path_offset(blob, "/chosen");
+       if (node < 0)
+               return 0;
+       fdt_setprop_string(blob, node, "stdout-path", "/chosen/framebuffer");
+
+       return 0;
+}