mpc8xxx: LCRR[CLKDIV] is sometimes five bits
authorTrent Piepho <tpiepho@freescale.com>
Wed, 3 Dec 2008 23:16:34 +0000 (15:16 -0800)
committerAndrew Fleming-AFLEMING <afleming@freescale.com>
Sat, 20 Dec 2008 00:20:25 +0000 (18:20 -0600)
On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
instead of four.

In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems.  It
should be safe as the fifth bit was defined as reserved and set to 0.

Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
15 files changed:
board/freescale/mpc8540ads/mpc8540ads.c
board/freescale/mpc8541cds/mpc8541cds.c
board/freescale/mpc8548cds/mpc8548cds.c
board/freescale/mpc8555cds/mpc8555cds.c
board/freescale/mpc8560ads/mpc8560ads.c
board/freescale/mpc8568mds/mpc8568mds.c
board/mpc8540eval/mpc8540eval.c
board/pm854/pm854.c
board/pm856/pm856.c
board/sbc8548/sbc8548.c
board/socrates/socrates.c
board/tqc/tqm85xx/tqm85xx.c
cpu/mpc85xx/cpu.c
cpu/mpc86xx/cpu.c
include/asm-ppc/fsl_lbc.h

index a0b6fbd..9e3f677 100644 (file)
@@ -133,7 +133,7 @@ local_bus_init(void)
         */
 
        get_sys_info(&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        if (lbc_hz < 66) {
index 7e40c5c..e6025c8 100644 (file)
@@ -308,7 +308,7 @@ local_bus_init(void)
         */
 
        get_sys_info(&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        if (lbc_hz < 66) {
index c562fc9..90e89bc 100644 (file)
@@ -125,7 +125,7 @@ local_bus_init(void)
        sys_info_t sysinfo;
 
        get_sys_info(&sysinfo);
-       clkdiv = (lbc->lcrr & 0x0f) * 2;
+       clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        gur->lbiuiplldcr1 = 0x00078080;
index 33685c1..53d5a93 100644 (file)
@@ -308,7 +308,7 @@ local_bus_init(void)
         */
 
        get_sys_info(&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        if (lbc_hz < 66) {
index 3730818..ac7778e 100644 (file)
@@ -337,7 +337,7 @@ local_bus_init(void)
         */
 
        get_sys_info(&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        if (lbc_hz < 66) {
index bc93be8..7a23b33 100644 (file)
@@ -188,7 +188,7 @@ local_bus_init(void)
        sys_info_t sysinfo;
 
        get_sys_info(&sysinfo);
-       clkdiv = (lbc->lcrr & 0x0f) * 2;
+       clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        gur->lbiuiplldcr1 = 0x00078080;
index fa0a336..bf270f4 100644 (file)
@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type)
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
        get_sys_info(&sysinfo);
        /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
-       if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
+       if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) {
                lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
        } else {
                lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
index fed0ed4..5353d73 100644 (file)
@@ -150,7 +150,7 @@ local_bus_init(void)
         */
 
        get_sys_info(&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        if (lbc_hz < 66) {
index 932f112..b14a3d3 100644 (file)
@@ -306,7 +306,7 @@ local_bus_init(void)
         */
 
        get_sys_info(&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        if (lbc_hz < 66) {
index 8c073cb..519b0f7 100644 (file)
@@ -126,7 +126,7 @@ local_bus_init(void)
        sys_info_t sysinfo;
 
        get_sys_info(&sysinfo);
-       clkdiv = (lbc->lcrr & 0x0f) * 2;
+       clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
        lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        gur->lbiuiplldcr1 = 0x00078080;
index d83dc7d..df9696e 100644 (file)
@@ -156,7 +156,7 @@ void local_bus_init (void)
        uint lcrr = CONFIG_SYS_LBC_LCRR;
 
        get_sys_info (&sysinfo);
-       clkdiv = lbc->lcrr & 0x0f;
+       clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        /* Disable PLL bypass for Local Bus Clock >= 66 MHz */
index 73f1d01..cda8208 100644 (file)
@@ -361,7 +361,7 @@ uint get_lbc_clock (void)
 {
        volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
        sys_info_t sys_info;
-       ulong clkdiv = lbc->lcrr & 0x0f;
+       ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
 
        get_sys_info (&sys_info);
 
index 943602f..59a9ac8 100644 (file)
@@ -174,7 +174,7 @@ int checkcpu (void)
            lcrr = lbc->lcrr;
        }
 #endif
-       clkdiv = lcrr & 0x0f;
+       clkdiv = lcrr & LCRR_CLKDIV;
        if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
 #if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
     defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536)
index 4cace98..0ff76e3 100644 (file)
@@ -110,7 +110,7 @@ checkcpu(void)
                lcrr = lbc->lcrr;
        }
 #endif
-       clkdiv = lcrr & 0x0f;
+       clkdiv = lcrr & LCRR_CLKDIV;
        if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
                printf("LBC:%4lu MHz\n",
                       sysinfo.freqSystemBus / 1000000 / clkdiv);
index 51fc5c1..e492c62 100644 (file)
 #define LCRR_EADC_2                    0x00020000
 #define LCRR_EADC_3                    0x00030000
 #define LCRR_EADC_4                    0x00000000
-#define LCRR_CLKDIV                    0x0000000F
+/* CLKDIV is five bits only on 8536, 8572, and 8610, so far, but the fifth bit
+ * should always be zero on older parts that have a four bit CLKDIV.
+ */
+#define LCRR_CLKDIV                    0x0000001F
 #define LCRR_CLKDIV_SHIFT              0
 #define LCRR_CLKDIV_2                  0x00000002
 #define LCRR_CLKDIV_4                  0x00000004