rockchip: clk: rk3368: implement DPLL (DRAM PLL) support
authorPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Thu, 22 Jun 2017 22:01:10 +0000 (00:01 +0200)
committerPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Sun, 13 Aug 2017 15:12:32 +0000 (17:12 +0200)
To implement a TPL stage (incl. its DRAM controller setup) for the
RK3368, we'll want to configure the DPLL (DRAM PLL).

This commit implements setting the DPLL (CLK_DDR) and provides PLL
configuration details for the common DRAM operating speeds found on
RK3368 boards.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
drivers/clk/rockchip/clk_rk3368.c

index d05be72..33d2946 100644 (file)
@@ -250,6 +250,37 @@ static ulong rk3368_clk_get_rate(struct clk *clk)
        return rate;
 }
 
+static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate)
+{
+       const struct pll_div *dpll_cfg = NULL;
+       const ulong MHz = 1000000;
+
+       /* Fout = ((Fin /NR) * NF )/ NO */
+       static const struct pll_div dpll_1200 =
+               PLL_DIVISORS(1200 * MHz, 1, 1);
+       static const struct pll_div dpll_1332 =
+               PLL_DIVISORS(1332 * MHz, 2, 1);
+       static const struct pll_div dpll_1600 =
+               PLL_DIVISORS(1600 * MHz, 3, 2);
+
+       switch (set_rate) {
+       case 1200*MHz:
+               dpll_cfg = &dpll_1200;
+               break;
+       case 1332*MHz:
+               dpll_cfg = &dpll_1332;
+               break;
+       case 1600*MHz:
+               dpll_cfg = &dpll_1600;
+               break;
+       default:
+               error("Unsupported SDRAM frequency!,%ld\n", set_rate);
+       }
+       rkclk_set_pll(cru, DPLL, dpll_cfg);
+
+       return set_rate;
+}
+
 static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
 {
        struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
@@ -257,6 +288,10 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
 
        debug("%s id:%ld rate:%ld\n", __func__, clk->id, rate);
        switch (clk->id) {
+       case CLK_DDR:
+               ret = rk3368_ddr_set_clk(priv->cru, rate);
+               break;
+
        case SCLK_SDMMC:
        case SCLK_EMMC:
                ret = rk3368_mmc_set_clk(priv->cru, clk->id, rate);