tg3: Fix io failures after chip reset

Commit f2096f94b514d88593355995d5dd276961e88af1, entitled
"tg3: Add 5720 H2BMC support", needed to add code to preserve some bits
set by firmware.  Unfortunately the new code causes throughput to stop
after a chip reset because it enables state machines before they are
ready.  This patch undoes the problematic code.  The bits will be
restored later in the init sequence.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index a5ff82d..5bf7671 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7412,16 +7412,11 @@ static int tg3_chip_reset(struct tg3 *tp)
                tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
        }
 
-       if (tg3_flag(tp, ENABLE_APE))
-               tp->mac_mode = MAC_MODE_APE_TX_EN |
-                              MAC_MODE_APE_RX_EN |
-                              MAC_MODE_TDE_ENABLE;
-
        if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) {
-               tp->mac_mode |= MAC_MODE_PORT_MODE_TBI;
+               tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
                val = tp->mac_mode;
        } else if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
-               tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+               tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
                val = tp->mac_mode;
        } else
                val = 0;
@@ -8559,12 +8554,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
                udelay(10);
        }
 
-       if (tg3_flag(tp, ENABLE_APE))
-               tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
-       else
-               tp->mac_mode = 0;
        tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
-               MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
+                       MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE |
+                       MAC_MODE_FHDE_ENABLE;
+       if (tg3_flag(tp, ENABLE_APE))
+               tp->mac_mode |= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
        if (!tg3_flag(tp, 5705_PLUS) &&
            !(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
            GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)