*/
}
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info)
+{
+ bw_info->ep_interval = 0;
+ bw_info->mult = 0;
+ bw_info->num_packets = 0;
+ bw_info->max_packet_size = 0;
+ bw_info->type = 0;
+ bw_info->max_esit_payload = 0;
+}
+
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_input_control_ctx *ctrl_ctx,
+ struct xhci_virt_device *virt_dev)
+{
+ struct xhci_bw_info *bw_info;
+ struct xhci_ep_ctx *ep_ctx;
+ unsigned int ep_type;
+ int i;
+
+ for (i = 1; i < 31; ++i) {
+ bw_info = &virt_dev->eps[i].bw_info;
+
+ /* We can't tell what endpoint type is being dropped, but
+ * unconditionally clearing the bandwidth info for non-periodic
+ * endpoints should be harmless because the info will never be
+ * set in the first place.
+ */
+ if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) {
+ /* Dropped endpoint */
+ xhci_clear_endpoint_bw_info(bw_info);
+ continue;
+ }
+
+ if (EP_IS_ADDED(ctrl_ctx, i)) {
+ ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i);
+ ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
+
+ /* Ignore non-periodic endpoints */
+ if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+ ep_type != ISOC_IN_EP &&
+ ep_type != INT_IN_EP)
+ continue;
+
+ /* Added or changed endpoint */
+ bw_info->ep_interval = CTX_TO_EP_INTERVAL(
+ le32_to_cpu(ep_ctx->ep_info));
+ bw_info->mult = CTX_TO_EP_MULT(
+ le32_to_cpu(ep_ctx->ep_info));
+ /* Number of packets is zero-based in the input context,
+ * but we want one-based for the interval table.
+ */
+ bw_info->num_packets = CTX_TO_MAX_BURST(
+ le32_to_cpu(ep_ctx->ep_info2)) + 1;
+ bw_info->max_packet_size = MAX_PACKET_DECODED(
+ le32_to_cpu(ep_ctx->ep_info2));
+ bw_info->type = ep_type;
+ bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD(
+ le32_to_cpu(ep_ctx->tx_info));
+ }
+ }
+}
+
/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
* Useful when you want to change one particular aspect of the endpoint and then
* issue a configure endpoint command.
!(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
}
+ xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
xhci_zero_in_ctx(xhci, virt_dev);
/*
* Install any rings for completely new endpoints or changed endpoints,
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
last_freed_endpoint = i;
}
+ xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
}
xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
#define EP_STATE_ERROR 4
/* Mult - Max number of burtst within an interval, in EP companion desc. */
#define EP_MULT(p) (((p) & 0x3) << 8)
+#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
/* bits 10:14 are Max Primary Streams */
/* bit 15 is Linear Stream Array */
/* Interval - period between requests to an endpoint - 125u increments. */
#define EP_INTERVAL(p) (((p) & 0xff) << 16)
#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
#define EP_MAXPSTREAMS_MASK (0x1f << 10)
#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
/* bit 6 reserved */
/* bit 7 is Host Initiate Disable - for disabling stream selection */
#define MAX_BURST(p) (((p)&0xff) << 8)
+#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
#define MAX_PACKET(p) (((p)&0xffff) << 16)
#define MAX_PACKET_MASK (0xffff << 16)
#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
/* tx_info bitmasks */
#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
+#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
/* deq bitmasks */
#define EP_CTX_CYCLE_MASK (1 << 0)
__le32 rsvd2[6];
};
+#define EP_IS_ADDED(ctrl_ctx, i) \
+ (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
+#define EP_IS_DROPPED(ctrl_ctx, i) \
+ (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
+
/* Represents everything that is needed to issue a command on the command ring.
* It's useful to pre-allocate these for commands that cannot fail due to
* out-of-memory errors, like freeing streams.
#define SMALL_STREAM_ARRAY_SIZE 256
#define MEDIUM_STREAM_ARRAY_SIZE 1024
+/* Some Intel xHCI host controllers need software to keep track of the bus
+ * bandwidth. Keep track of endpoint info here. Each root port is allocated
+ * the full bus bandwidth. We must also treat TTs (including each port under a
+ * multi-TT hub) as a separate bandwidth domain. The direct memory interface
+ * (DMI) also limits the total bandwidth (across all domains) that can be used.
+ */
+struct xhci_bw_info {
+ unsigned int ep_interval;
+ /* mult and num_packets are zero-based */
+ unsigned int mult;
+ unsigned int num_packets;
+ unsigned int max_packet_size;
+ unsigned int max_esit_payload;
+ unsigned int type;
+};
+
struct xhci_virt_ep {
struct xhci_ring *ring;
/* Related to endpoints that are configured to use stream IDs only */
* process the missed tds on the endpoint ring.
*/
bool skip;
+ struct xhci_bw_info bw_info;
};
enum xhci_overhead_type {
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_input_control_ctx *ctrl_ctx,
+ struct xhci_virt_device *virt_dev);
void xhci_endpoint_copy(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx,
git.openpandora.org / pandora-kernel.git / commitdiff