+/*
+ * support for probing IDE PCI devices in the PCI bus order
+ *
+ * Copyright (c) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (c) 1995-1998 Mark Lord
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ */
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
+/*
+ * Module interfaces
+ */
+
+static int pre_init = 1; /* Before first ordered IDE scan */
+static LIST_HEAD(ide_pci_drivers);
+
+/*
+ * __ide_pci_register_driver - attach IDE driver
+ * @driver: pci driver
+ * @module: owner module of the driver
+ *
+ * Registers a driver with the IDE layer. The IDE layer arranges that
+ * boot time setup is done in the expected device order and then
+ * hands the controllers off to the core PCI code to do the rest of
+ * the work.
+ *
+ * Returns are the same as for pci_register_driver
+ */
+
+int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
+ const char *mod_name)
+{
+ if (!pre_init)
+ return __pci_register_driver(driver, module, mod_name);
+ driver->driver.owner = module;
+ list_add_tail(&driver->node, &ide_pci_drivers);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
+
+/**
+ * ide_scan_pcidev - find an IDE driver for a device
+ * @dev: PCI device to check
+ *
+ * Look for an IDE driver to handle the device we are considering.
+ * This is only used during boot up to get the ordering correct. After
+ * boot up the pci layer takes over the job.
+ */
+
+static int __init ide_scan_pcidev(struct pci_dev *dev)
+{
+ struct list_head *l;
+ struct pci_driver *d;
+
+ list_for_each(l, &ide_pci_drivers) {
+ d = list_entry(l, struct pci_driver, node);
+ if (d->id_table) {
+ const struct pci_device_id *id =
+ pci_match_id(d->id_table, dev);
+
+ if (id != NULL && d->probe(dev, id) >= 0) {
+ dev->driver = d;
+ pci_dev_get(dev);
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * ide_scan_pcibus - perform the initial IDE driver scan
+ *
+ * Perform the initial bus rather than driver ordered scan of the
+ * PCI drivers. After this all IDE pci handling becomes standard
+ * module ordering not traditionally ordered.
+ */
+
+int __init ide_scan_pcibus(void)
+{
+ struct pci_dev *dev = NULL;
+ struct pci_driver *d;
+ struct list_head *l, *n;
+
+ pre_init = 0;
+ if (!ide_scan_direction)
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
+ ide_scan_pcidev(dev);
+ else
+ while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
+ dev)))
+ ide_scan_pcidev(dev);
+
+ /*
+ * Hand the drivers over to the PCI layer now we
+ * are post init.
+ */
+
+ list_for_each_safe(l, n, &ide_pci_drivers) {
+ list_del(l);
+ d = list_entry(l, struct pci_driver, node);
+ if (__pci_register_driver(d, d->driver.owner,
+ d->driver.mod_name))
+ printk(KERN_ERR "%s: failed to register %s driver\n",
+ __FUNCTION__, d->driver.mod_name);
+ }
+
+ return 0;
+}
+
static int __init ide_scan_pci(void)
{
return ide_scan_pcibus();
}
EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
-
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-/*
- * Module interfaces
- */
-
-static int pre_init = 1; /* Before first ordered IDE scan */
-static LIST_HEAD(ide_pci_drivers);
-
-/*
- * __ide_pci_register_driver - attach IDE driver
- * @driver: pci driver
- * @module: owner module of the driver
- *
- * Registers a driver with the IDE layer. The IDE layer arranges that
- * boot time setup is done in the expected device order and then
- * hands the controllers off to the core PCI code to do the rest of
- * the work.
- *
- * Returns are the same as for pci_register_driver
- */
-
-int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
- const char *mod_name)
-{
- if (!pre_init)
- return __pci_register_driver(driver, module, mod_name);
- driver->driver.owner = module;
- list_add_tail(&driver->node, &ide_pci_drivers);
- return 0;
-}
-EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
-
-/**
- * ide_scan_pcidev - find an IDE driver for a device
- * @dev: PCI device to check
- *
- * Look for an IDE driver to handle the device we are considering.
- * This is only used during boot up to get the ordering correct. After
- * boot up the pci layer takes over the job.
- */
-
-static int __init ide_scan_pcidev(struct pci_dev *dev)
-{
- struct list_head *l;
- struct pci_driver *d;
-
- list_for_each(l, &ide_pci_drivers) {
- d = list_entry(l, struct pci_driver, node);
- if (d->id_table) {
- const struct pci_device_id *id =
- pci_match_id(d->id_table, dev);
-
- if (id != NULL && d->probe(dev, id) >= 0) {
- dev->driver = d;
- pci_dev_get(dev);
- return 1;
- }
- }
- }
- return 0;
-}
-
-/**
- * ide_scan_pcibus - perform the initial IDE driver scan
- *
- * Perform the initial bus rather than driver ordered scan of the
- * PCI drivers. After this all IDE pci handling becomes standard
- * module ordering not traditionally ordered.
- */
-
-int __init ide_scan_pcibus(void)
-{
- struct pci_dev *dev = NULL;
- struct pci_driver *d;
- struct list_head *l, *n;
-
- pre_init = 0;
- if (!ide_scan_direction)
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
- ide_scan_pcidev(dev);
- else
- while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
- dev)))
- ide_scan_pcidev(dev);
-
- /*
- * Hand the drivers over to the PCI layer now we
- * are post init.
- */
-
- list_for_each_safe(l, n, &ide_pci_drivers) {
- list_del(l);
- d = list_entry(l, struct pci_driver, node);
- if (__pci_register_driver(d, d->driver.owner,
- d->driver.mod_name))
- printk(KERN_ERR "%s: failed to register %s driver\n",
- __FUNCTION__, d->driver.mod_name);
- }
-
- return 0;
-}
-#endif
git.openpandora.org / pandora-kernel.git / commitdiff