Adds a driver for Trident TV Master tm5600/tm6000 chips.
Those USB devices are usually found with a Xceive xc2028/xc3028
tuner, although the firmware seems to be modified to work with
those chips on some older devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
--- /dev/null
+config VIDEO_TM6000
+ tristate "TV Master TM5600/6000 driver"
+ select VIDEO_V4L2
+ select TUNER_XC2028
+ select VIDEO_USB_ISOC
+ select VIDEOBUF_VMALLOC
+ help
+ Support for TM5600/TM6000 USB Device
+
+ Since these cards have no MPEG decoder onboard, they transmit
+ only compressed MPEG data over the usb bus, so you need
+ an external software decoder to watch TV on your computer.
+
+ Say Y if you own such a device and want to use it.
--- /dev/null
+tm6000-objs := tm6000-cards.o \
+ tm6000-core.o \
+ tm6000-i2c.o \
+ tm6000-video.o
+
+obj-$(CONFIG_VIDEO_TM6000) += tm6000.o
+
+EXTRA_CFLAGS = -Idrivers/media/video
--- /dev/null
+/*
+ tm6000-cards.c - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+
+#include "tm6000.h"
+
+#define TM6000_BOARD_UNKNOWN 0
+#define TM5600_BOARD_GENERIC 1
+#define TM6000_BOARD_GENERIC 2
+#define TM5600_BOARD_10MOONS_UT821 3
+#define TM6000_BOARD_10MOONS_UT330 4
+#define TM6000_BOARD_ADSTECH_DUAL_TV 5
+
+#define TM6000_MAXBOARDS 16
+static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(card, int, NULL, 0444);
+
+struct tm6000_board {
+ char *name;
+
+ struct tm6000_capabilities caps;
+
+ int tuner_type; /* type of the tuner */
+ int tuner_addr; /* tuner address */
+};
+
+
+struct tm6000_board tm6000_boards[] = {
+ [TM6000_BOARD_UNKNOWN] = {
+ .name = "Unknown tm6000 video grabber",
+ .caps = {
+ .has_tuner = 1,
+ },
+ },
+ [TM5600_BOARD_GENERIC] = {
+ .name = "Generic tm5600 board",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2,
+ .caps = {
+ .has_tuner = 1,
+ },
+ },
+ [TM6000_BOARD_GENERIC] = {
+ .name = "Generic tm6000 board",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ },
+ },
+ [TM5600_BOARD_10MOONS_UT821] = {
+ .name = "10Moons UT 821",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ },
+ [TM6000_BOARD_10MOONS_UT330] = {
+ .name = "10Moons UT 330",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc8,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ },
+ },
+ [TM6000_BOARD_ADSTECH_DUAL_TV] = {
+ .name = "ADSTECH Dual TV USB",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc8,
+ .caps = {
+ .has_tuner = 1,
+ .has_tda9874 = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ },
+ },
+};
+
+/* table of devices that work with this driver */
+struct usb_device_id tm6000_id_table [] = {
+ { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 },
+ { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
+ { },
+};
+
+static int tm6000_init_dev(struct tm6000_core *dev)
+{
+ struct v4l2_frequency f;
+ int rc = 0;
+
+ mutex_init(&dev->lock);
+
+ mutex_lock(&dev->lock);
+
+ /* Initializa board-specific data */
+ dev->tuner_type = tm6000_boards[dev->model].tuner_type;
+ dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
+
+ dev->caps = tm6000_boards[dev->model].caps;
+
+ /* initialize hardware */
+ rc=tm6000_init (dev);
+ if (rc<0)
+ goto err;
+
+ /* register i2c bus */
+ rc=tm6000_i2c_register(dev);
+ if (rc<0)
+ goto err;
+
+ /* register and initialize V4L2 */
+ rc=tm6000_v4l2_register(dev);
+ if (rc<0)
+ goto err;
+
+ /* Request tuner */
+ request_module ("tuner");
+// norm=V4L2_STD_NTSC_M;
+ dev->norm=V4L2_STD_PAL_M;
+ tm6000_i2c_call_clients(dev, VIDIOC_S_STD, &dev->norm);
+
+ /* configure tuner */
+ f.tuner = 0;
+ f.type = V4L2_TUNER_ANALOG_TV;
+ f.frequency = 3092; /* 193.25 MHz */
+ dev->freq = f.frequency;
+
+ tm6000_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+
+err:
+ mutex_unlock(&dev->lock);
+ return rc;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+static void get_max_endpoint ( struct usb_device *usbdev,
+ char *msgtype,
+ struct usb_host_endpoint *curr_e,
+ unsigned int *maxsize,
+ struct usb_host_endpoint **ep )
+{
+ u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
+ unsigned int size = tmp & 0x7ff;
+
+ if (usbdev->speed == USB_SPEED_HIGH)
+ size = size * hb_mult (tmp);
+
+ if (size>*maxsize) {
+ *ep = curr_e;
+ *maxsize = size;
+ printk("tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
+ msgtype, curr_e->desc.bEndpointAddress,
+ size);
+ }
+}
+
+/*
+ * tm6000_usb_probe()
+ * checks for supported devices
+ */
+static int tm6000_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev;
+ struct tm6000_core *dev = NULL;
+ int i,rc=0;
+ int nr=0;
+ char *speed;
+
+
+ usbdev=usb_get_dev(interface_to_usbdev(interface));
+
+ /* Selects the proper interface */
+ rc=usb_set_interface(usbdev,0,1);
+ if (rc<0)
+ goto err;
+
+ /* Check to see next free device and mark as used */
+ nr=find_first_zero_bit(&tm6000_devused,TM6000_MAXBOARDS);
+ if (nr >= TM6000_MAXBOARDS) {
+ printk ("tm6000: Supports only %i em28xx boards.\n",TM6000_MAXBOARDS);
+ usb_put_dev(usbdev);
+ return -ENOMEM;
+ }
+
+ /* Create and initialize dev struct */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ printk ("tm6000" ": out of memory!\n");
+ usb_put_dev(usbdev);
+ return -ENOMEM;
+ }
+ spin_lock_init(&dev->slock);
+
+ /* Increment usage count */
+ tm6000_devused|=1<<nr;
+
+ dev->udev= usbdev;
+ dev->model=id->driver_info;
+ snprintf(dev->name, 29, "tm6000 #%d", nr);
+ dev->devno=nr;
+
+ switch (usbdev->speed) {
+ case USB_SPEED_LOW:
+ speed = "1.5";
+ break;
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_FULL:
+ speed = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "480";
+ break;
+ default:
+ speed = "unknown";
+ }
+
+
+
+ /* Get endpoints */
+ for (i = 0; i < interface->num_altsetting; i++) {
+ int ep;
+
+ for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+ struct usb_host_endpoint *e;
+ int dir_out;
+
+ e = &interface->altsetting[i].endpoint[ep];
+
+ dir_out = ((e->desc.bEndpointAddress &
+ USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+
+ printk("tm6000: alt %d, interface %i, class %i\n",
+ i,
+ interface->altsetting[i].desc.bInterfaceNumber,
+ interface->altsetting[i].desc.bInterfaceClass);
+
+ switch (e->desc.bmAttributes) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (!dir_out) {
+ get_max_endpoint (usbdev, "Bulk IN", e,
+ &dev->max_bulk_in,
+ &dev->bulk_in);
+ } else {
+ get_max_endpoint (usbdev, "Bulk OUT", e,
+ &dev->max_bulk_out,
+ &dev->bulk_out);
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!dir_out) {
+ get_max_endpoint (usbdev, "ISOC IN", e,
+ &dev->max_isoc_in,
+ &dev->isoc_in);
+ } else {
+ get_max_endpoint (usbdev, "ISOC OUT", e,
+ &dev->max_isoc_out,
+ &dev->isoc_out);
+ }
+ break;
+ }
+ }
+ }
+
+ if (interface->altsetting->desc.bAlternateSetting) {
+ printk("selecting alt setting %d\n",
+ interface->altsetting->desc.bAlternateSetting);
+ rc = usb_set_interface (usbdev,
+ interface->altsetting->desc.bInterfaceNumber,
+ interface->altsetting->desc.bAlternateSetting);
+ if (rc<0)
+ goto err;
+ }
+
+ printk("tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
+ speed,
+ le16_to_cpu(dev->udev->descriptor.idVendor),
+ le16_to_cpu(dev->udev->descriptor.idProduct),
+ interface->altsetting->desc.bInterfaceNumber);
+
+/* check if the the device has the iso in endpoint at the correct place */
+ if (!dev->isoc_in) {
+ printk("tm6000: probing error: no IN ISOC endpoint!\n");
+ rc= -ENODEV;
+
+ goto err;
+ }
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ printk("tm6000: Found %s\n", tm6000_boards[dev->model].name);
+
+ rc=tm6000_init_dev(dev);
+
+ if (rc<0)
+ goto err;
+
+ return 0;
+
+err:
+ tm6000_devused&=~(1<<nr);
+ usb_put_dev(usbdev);
+
+ kfree(dev);
+ return rc;
+}
+
+/*
+ * tm6000_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void tm6000_usb_disconnect(struct usb_interface *interface)
+{
+ struct tm6000_core *dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (!dev)
+ return;
+
+ tm6000_i2c_unregister(dev);
+
+ printk("tm6000: disconnecting %s\n", dev->name);
+
+ mutex_lock(&dev->lock);
+
+ tm6000_i2c_unregister(dev);
+
+ tm6000_v4l2_unregister(dev);
+
+// wake_up_interruptible_all(&dev->open);
+
+ dev->state |= DEV_DISCONNECTED;
+
+ mutex_unlock(&dev->lock);
+}
+
+static struct usb_driver tm6000_usb_driver = {
+ .name = "tm6000",
+ .probe = tm6000_usb_probe,
+ .disconnect = tm6000_usb_disconnect,
+ .id_table = tm6000_id_table,
+};
+
+static int __init tm6000_module_init(void)
+{
+ int result;
+
+ printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
+ (TM6000_VERSION >> 16) & 0xff,
+ (TM6000_VERSION >> 8) & 0xff, TM6000_VERSION & 0xff);
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&tm6000_usb_driver);
+ if (result)
+ printk("tm6000"
+ " usb_register failed. Error number %d.\n", result);
+
+ return result;
+}
+
+static void __exit tm6000_module_exit(void)
+{
+ /* deregister at USB subsystem */
+ usb_deregister(&tm6000_usb_driver);
+}
+
+module_init(tm6000_module_init);
+module_exit(tm6000_module_exit);
+
+MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000 USB2 adapter");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ tm6000-core.c - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/video_decoder.h>
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+
+#ifdef HACK /* HACK */
+#include "tm6000-hack.c"
+#endif
+
+#define USB_TIMEOUT 5*HZ /* ms */
+
+int tm6000_read_write_usb (struct tm6000_core *dev, u8 req_type, u8 req,
+ u16 value, u16 index, u8 *buf, u16 len)
+{
+ int ret, i;
+ unsigned int pipe;
+ static int ini=0, last=0, n=0;
+ u8 *data=NULL;
+
+ if (len)
+ data = kzalloc(len, GFP_KERNEL);
+
+
+ if (req_type & USB_DIR_IN)
+ pipe=usb_rcvctrlpipe(dev->udev, 0);
+ else {
+ pipe=usb_sndctrlpipe(dev->udev, 0);
+ memcpy(data, buf, len);
+ }
+
+ if (tm6000_debug & V4L2_DEBUG_I2C) {
+ if (!ini)
+ last=ini=jiffies;
+
+ printk("%06i (dev %p, pipe %08x): ", n, dev->udev, pipe);
+
+ printk( "%s: %06u ms %06u ms %02x %02x %02x %02x %02x %02x %02x %02x ",
+ (req_type & USB_DIR_IN)?" IN":"OUT",
+ jiffies_to_msecs(jiffies-last),
+ jiffies_to_msecs(jiffies-ini),
+ req_type, req,value&0xff,value>>8, index&0xff, index>>8,
+ len&0xff, len>>8);
+ last=jiffies;
+ n++;
+
+ if ( !(req_type & USB_DIR_IN) ) {
+ printk(">>> ");
+ for (i=0;i<len;i++) {
+ printk(" %02x",buf[i]);
+ }
+ printk("\n");
+ }
+ }
+
+ ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index, data,
+ len, USB_TIMEOUT);
+
+ if (req_type & USB_DIR_IN)
+ memcpy(buf, data, len);
+
+ if (tm6000_debug & V4L2_DEBUG_I2C) {
+ if (ret<0) {
+ if (req_type & USB_DIR_IN)
+ printk("<<< (len=%d)\n",len);
+
+ printk("%s: Error #%d\n", __FUNCTION__, ret);
+ } else if (req_type & USB_DIR_IN) {
+ printk("<<< ");
+ for (i=0;i<len;i++) {
+ printk(" %02x",buf[i]);
+ }
+ printk("\n");
+ }
+ }
+
+ kfree(data);
+
+ return ret;
+}
+
+int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ return
+ tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+ req, value, index, NULL, 0);
+}
+
+int tm6000_get_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ int rc;
+ u8 buf[1];
+
+ rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+ value, index, buf, 1);
+
+ if (rc<0)
+ return rc;
+
+ return *buf;
+}
+
+int tm6000_get_reg16 (struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ int rc;
+ u8 buf[2];
+
+ rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+ value, index, buf, 2);
+
+ if (rc<0)
+ return rc;
+
+ return buf[1]|buf[0]<<8;
+}
+
+void tm6000_set_fourcc_format(struct tm6000_core *dev)
+{
+ if (dev->fourcc==V4L2_PIX_FMT_UYVY) {
+ /* Sets driver to UYUV */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc1, 0xd0);
+ } else {
+ /* Sets driver to YUV2 */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc1, 0x90);
+ }
+}
+
+int tm6000_init_analog_mode (struct tm6000_core *dev)
+{
+
+ /* Enables soft reset */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x3f, 0x01);
+
+ if (dev->scaler) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc0, 0x20);
+ } else {
+ /* Enable Hfilter and disable TS Drop err */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc0, 0x80);
+ }
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc3, 0x88);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xda, 0x23);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd1, 0xc0);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd2, 0xd8);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd6, 0x06);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xdf, 0x1f);
+
+ /* AP Software reset */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xff, 0x08);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xff, 0x00);
+
+ tm6000_set_fourcc_format(dev);
+
+ /* Disables soft reset */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x3f, 0x00);
+
+ /* E3: Select input 0 - TV tuner */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe3, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x60);
+
+ /* Tuner firmware can now be loaded */
+
+ tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_1, 0x00);
+ msleep(11);
+
+ /* This controls input */
+ tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_2, 0x0);
+ tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_3, 0x01);
+ msleep(20);
+
+ /*FIXME: Hack!!! */
+ struct v4l2_frequency f;
+ mutex_lock(&dev->lock);
+ f.frequency=dev->freq;
+ tm6000_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
+ mutex_unlock(&dev->lock);
+
+ msleep(100);
+ tm6000_set_standard (dev, &dev->norm);
+ tm6000_set_audio_bitrate (dev,48000);
+
+
+ return 0;
+}
+
+
+/* The meaning of those initializations are unknown */
+u8 init_tab[][2] = {
+ /* REG VALUE */
+ { 0xdf, 0x1f },
+ { 0xff, 0x08 },
+ { 0xff, 0x00 },
+ { 0xd5, 0x4f },
+ { 0xda, 0x23 },
+ { 0xdb, 0x08 },
+ { 0xe2, 0x00 },
+ { 0xe3, 0x10 },
+ { 0xe5, 0x00 },
+ { 0xe8, 0x00 },
+ { 0xeb, 0x64 }, /* 48000 bits/sample, external input */
+ { 0xee, 0xc2 },
+ { 0x3f, 0x01 }, /* Start of soft reset */
+ { 0x00, 0x00 },
+ { 0x01, 0x07 },
+ { 0x02, 0x5f },
+ { 0x03, 0x00 },
+ { 0x05, 0x64 },
+ { 0x07, 0x01 },
+ { 0x08, 0x82 },
+ { 0x09, 0x36 },
+ { 0x0a, 0x50 },
+ { 0x0c, 0x6a },
+ { 0x11, 0xc9 },
+ { 0x12, 0x07 },
+ { 0x13, 0x3b },
+ { 0x14, 0x47 },
+ { 0x15, 0x6f },
+ { 0x17, 0xcd },
+ { 0x18, 0x1e },
+ { 0x19, 0x8b },
+ { 0x1a, 0xa2 },
+ { 0x1b, 0xe9 },
+ { 0x1c, 0x1c },
+ { 0x1d, 0xcc },
+ { 0x1e, 0xcc },
+ { 0x1f, 0xcd },
+ { 0x20, 0x3c },
+ { 0x21, 0x3c },
+ { 0x2d, 0x48 },
+ { 0x2e, 0x88 },
+ { 0x30, 0x22 },
+ { 0x31, 0x61 },
+ { 0x32, 0x74 },
+ { 0x33, 0x1c },
+ { 0x34, 0x74 },
+ { 0x35, 0x1c },
+ { 0x36, 0x7a },
+ { 0x37, 0x26 },
+ { 0x38, 0x40 },
+ { 0x39, 0x0a },
+ { 0x42, 0x55 },
+ { 0x51, 0x11 },
+ { 0x55, 0x01 },
+ { 0x57, 0x02 },
+ { 0x58, 0x35 },
+ { 0x59, 0xa0 },
+ { 0x80, 0x15 },
+ { 0x82, 0x42 },
+ { 0xc1, 0xd0 },
+ { 0xc3, 0x88 },
+ { 0x3f, 0x00 }, /* End of the soft reset */
+};
+
+int tm6000_init (struct tm6000_core *dev)
+{
+ int board, rc=0, i;
+
+#ifdef HACK /* HACK */
+ init_tm6000(dev);
+ return 0;
+#else
+
+ /* Load board's initialization table */
+ for (i=0; i< ARRAY_SIZE(init_tab); i++) {
+ rc= tm6000_set_reg (dev, REQ_07_SET_GET_AVREG,
+ init_tab[i][0],init_tab[i][1]);
+ if (rc<0) {
+ printk (KERN_ERR "Error %i while setting reg %d to value %d\n",
+ rc, init_tab[i][0],init_tab[i][1]);
+ return rc;
+ }
+ }
+
+ /* Check board version - maybe 10Moons specific */
+ board=tm6000_get_reg16 (dev, 0x40, 0, 0);
+ if (board >=0) {
+ printk (KERN_INFO "Board version = 0x%04x\n",board);
+ } else {
+ printk (KERN_ERR "Error %i while retrieving board version\n",board);
+ }
+
+ tm6000_set_reg (dev, REQ_05_SET_GET_USBREG, 0x18, 0x00);
+ msleep(5); /* Just to be conservative */
+
+ /* Reset GPIO1. Maybe, this is 10 Moons specific */
+ for (i=0; i< 3; i++) {
+ rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_1, 0);
+ if (rc<0) {
+ printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc);
+ return rc;
+ }
+
+ msleep(10); /* Just to be conservative */
+ rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_1, 1);
+ if (rc<0) {
+ printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc);
+ return rc;
+ }
+
+ if (!i)
+ rc=tm6000_get_reg16(dev, 0x40,0,0);
+ }
+ return 0;
+
+#endif /* HACK */
+}
+
+#define tm6000_wrt(dev,req,reg,val, data...) \
+ { const static u8 _val[] = data; \
+ tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR, \
+ req,reg, val, (u8 *) _val, ARRAY_SIZE(_val)); \
+ }
+
+/*
+TM5600/6000 register values to set video standards.
+ There's an adjust, common to all, for composite video
+ Additional adjustments are required for S-Video, based on std.
+
+ Standards values for TV S-Video Changes
+REG PAL PAL_M PAL_N SECAM NTSC Comp. PAL PAL_M PAL_N SECAM NTSC
+0xdf 0x1f 0x1f 0x1f 0x1f 0x1f
+0xe2 0x00 0x00 0x00 0x00 0x00
+0xe8 0x0f 0x0f 0x0f 0x0f 0x0f 0x00 0x00 0x00 0x00 0x00
+0xeb 0x60 0x60 0x60 0x60 0x60 0x64 0x64 0x64 0x64 0x64 0x64
+0xd5 0x5f 0x5f 0x5f 0x4f 0x4f 0x4f 0x4f 0x4f 0x4f 0x4f
+0xe3 0x00 0x00 0x00 0x00 0x00 0x10 0x10 0x10 0x10 0x10 0x10
+0xe5 0x00 0x00 0x00 0x00 0x00 0x10 0x10 0x10 0x10 0x10
+0x3f 0x01 0x01 0x01 0x01 0x01
+0x00 0x32 0x04 0x36 0x38 0x00 0x33 0x05 0x37 0x39 0x01
+0x01 0x0e 0x0e 0x0e 0x0e 0x0f
+0x02 0x5f 0x5f 0x5f 0x5f 0x5f
+0x03 0x02 0x00 0x02 0x02 0x00 0x04 0x04 0x04 0x03 0x03
+0x07 0x01 0x01 0x01 0x01 0x01 0x00 0x00
+0x17 0xcd 0xcd 0xcd 0xcd 0xcd 0x8b
+0x18 0x25 0x1e 0x1e 0x24 0x1e
+0x19 0xd5 0x83 0x91 0x92 0x8b
+0x1a 0x63 0x0a 0x1f 0xe8 0xa2
+0x1b 0x50 0xe0 0x0c 0xed 0xe9
+0x1c 0x1c 0x1c 0x1c 0x1c 0x1c
+0x1d 0xcc 0xcc 0xcc 0xcc 0xcc
+0x1e 0xcc 0xcc 0xcc 0xcc 0xcc
+0x1f 0xcd 0xcd 0xcd 0xcd 0xcd
+0x2e 0x8c 0x88 0x8c 0x8c 0x88 0x88
+0x30 0x2c 0x20 0x2c 0x2c 0x22 0x2a 0x22 0x22 0x2a
+0x31 0xc1 0x61 0xc1 0xc1 0x61
+0x33 0x0c 0x0c 0x0c 0x2c 0x1c
+0x35 0x1c 0x1c 0x1c 0x18 0x1c
+0x82 0x52 0x52 0x52 0x42 0x42
+0x04 0xdc 0xdc 0xdc 0xdd
+0x0d 0x07 0x07 0x07 0x87 0x07
+0x3f 0x00 0x00 0x00 0x00 0x00
+*/
+
+int tm6000_set_standard (struct tm6000_core *dev, v4l2_std_id *norm)
+{
+ dev->norm=*norm;
+
+ /* HACK: Should use, instead, the common code!!! */
+ if (*norm & V4L2_STD_PAL_M) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xdf, 0x1f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe2, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe8, 0x0f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x60);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd5, 0x5f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe3, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe5, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x3f, 0x01);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x04);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x01, 0x0e);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x02, 0x5f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x07, 0x01);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x18, 0x1e);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x19, 0x83);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1a, 0x0a);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1b, 0xe0);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1c, 0x1c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1d, 0xcc);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1e, 0xcc);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1f, 0xcd);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x88);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x20);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x31, 0x61);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x33, 0x0c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x35, 0x1c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x82, 0x52);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x04, 0xdc);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0d, 0x07);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x3f, 0x00);
+ return 0;
+ }
+
+ /* */
+// tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x01);
+// tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00);
+
+ /* Set registers common to all standards */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xdf, 0x1f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe2, 0x00);
+
+ switch (dev->input) {
+ case TM6000_INPUT_TV:
+ /* Seems to disable ADC2 - needed for TV and RCA */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe8, 0x0f);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x60);
+
+ if (*norm & V4L2_STD_PAL) {
+ /* Enable UV_FLT_EN */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd5, 0x5f);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd5, 0x4f);
+ }
+
+ /* E3: Select input 0 */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe3, 0x00);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe5, 0x10);
+
+ break;
+ case TM6000_INPUT_COMPOSITE:
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x64);
+ /* E3: Select input 1 */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe3, 0x10);
+ break;
+ case TM6000_INPUT_SVIDEO:
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe8, 0x00);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x64);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xd5, 0x4f);
+ /* E3: Select input 1 */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe3, 0x10);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xe5, 0x10);
+
+ break;
+ }
+
+ /* Software reset */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x3f, 0x01);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x02, 0x5f);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x07, 0x01);
+// tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x17, 0xcd);
+
+ /* Horizontal Sync DTO = 0x1ccccccd */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1c, 0x1c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1d, 0xcc);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1e, 0xcc);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1f, 0xcd);
+
+ /* Vertical Height */
+ if (*norm & V4L2_STD_525_60) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x31, 0x61);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x31, 0xc1);
+ }
+
+ /* Horizontal Length */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2f, 640/8);
+
+ if (*norm & V4L2_STD_PAL) {
+ /* Common to All PAL Standards */
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x01, 0x0e);
+
+ /* Vsync Hsinc Lockout End */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x33, 0x0c);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x35, 0x1c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x82, 0x52);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x04, 0xdc);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0d, 0x07);
+ if (*norm & V4L2_STD_PAL_M) {
+
+ /* Chroma DTO */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x18, 0x1e);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x19, 0x83);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1a, 0x0a);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1b, 0xe0);
+
+ /* Active Video Horiz Start Time */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x88);
+
+ if (dev->input==TM6000_INPUT_SVIDEO) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x05);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x04);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x22);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x04);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x20);
+ }
+ } else if (*norm & V4L2_STD_PAL_N) {
+ /* Chroma DTO */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x18, 0x1e);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x19, 0x91);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1a, 0x1f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1b, 0x0c);
+
+ if (dev->input==TM6000_INPUT_SVIDEO) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x37);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x04);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x88);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x22);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x36);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x02);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x8c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x2c);
+ }
+ } else { // Other PAL standards
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x18, 0x25);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x19, 0xd5);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1a, 0x63);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1b, 0x50);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x8c);
+
+ if (dev->input==TM6000_INPUT_SVIDEO) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x33);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x04);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x2a);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x2c);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x32);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x02);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x2c);
+ }
+ }
+ } if (*norm & V4L2_STD_SECAM) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x01, 0x0e);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x18, 0x24);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x19, 0x92);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1a, 0xe8);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1b, 0xed);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x8c);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x33, 0x2c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x35, 0x18);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x82, 0x42);
+ // Register 0x04 is not initialized on SECAM
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0d, 0x87);
+
+ if (dev->input==TM6000_INPUT_SVIDEO) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x39);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x03);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x2a);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x38);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x02);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x2c);
+ }
+ } else { /* NTSC */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x01, 0x0f);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x18, 0x1e);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x19, 0x8b);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1a, 0xa2);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x1b, 0xe9);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x2e, 0x88);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x30, 0x22);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x33, 0x1c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x35, 0x1c);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x82, 0x42);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0d, 0x07);
+ if (dev->input==TM6000_INPUT_SVIDEO) {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x01);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x03);
+
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x07, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x17, 0x8b);
+ } else {
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00, 0x00);
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x03, 0x00);
+ }
+ }
+
+
+ /* End of software reset */
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x3f, 0x00);
+
+ msleep(40);
+
+ return 0;
+}
+
+int tm6000_set_audio_bitrate (struct tm6000_core *dev, int bitrate)
+{
+ int val;
+
+ val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x0);
+printk("Original value=%d\n",val);
+ if (val<0)
+ return val;
+
+ val &= 0x0f; /* Preserve the audio input control bits */
+ switch (bitrate) {
+ case 44100:
+ val|=0xd0;
+ break;
+ case 48000:
+ val|=0x60;
+ break;
+ }
+ val=tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, val);
+
+ return val;
+}
--- /dev/null
+/*
+ tm6000-i2c.c - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include "tuner-xc2028.h"
+
+
+/*FIXME: Hack to avoid needing to patch i2c-id.h */
+#define I2C_HW_B_TM6000 I2C_HW_B_EM28XX
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_scan = 0;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+static unsigned int i2c_debug = 0;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define i2c_dprintk(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \
+ printk(KERN_DEBUG "%s at %s: " fmt, \
+ dev->name, __FUNCTION__ , ##args); } while (0)
+
+
+/* Returns 0 if address is found */
+static int tm6000_i2c_scan(struct i2c_adapter *i2c_adap, int addr)
+{
+ struct tm6000_core *dev = i2c_adap->algo_data;
+
+#if 1
+ /* HACK: i2c scan is not working yet */
+ if (
+ (dev->caps.has_tuner && (addr==dev->tuner_addr)) ||
+ (dev->caps.has_tda9874 && (addr==0xb0)) ||
+ (dev->caps.has_zl10353 && (addr==0x1e)) ||
+ (dev->caps.has_eeprom && (addr==0xa0))
+ ) {
+ printk("Hack: enabling device at addr 0x%02x\n",addr);
+ return (1);
+ } else {
+ return -ENODEV;
+ }
+#else
+ int rc=-ENODEV;
+ char buf[1];
+
+ /* This sends addr + 1 byte with 0 */
+ rc = tm6000_read_write_usb (dev,
+ USB_DIR_IN | USB_TYPE_VENDOR,
+ REQ_16_SET_GET_I2CSEQ,
+ addr, 0,
+ buf, 0);
+ msleep(10);
+
+ if (rc<0) {
+ if (i2c_debug>=2)
+ printk("no device at addr 0x%02x\n",addr);
+ }
+
+ printk("Hack: check on addr 0x%02x returned %d\n",addr,rc);
+
+ return rc;
+#endif
+}
+
+static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct tm6000_core *dev = i2c_adap->algo_data;
+ int addr, rc, i, byte;
+
+ if (num <= 0)
+ return 0;
+ for (i = 0; i < num; i++) {
+ addr = (msgs[i].addr << 1) &0xff;
+ i2c_dprintk(2,"%s %s addr=0x%x len=%d:",
+ (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+ i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+
+ if (!msgs[i].len) {
+ /* Do I2C scan */
+ rc=tm6000_i2c_scan(i2c_adap, addr);
+ } else if (msgs[i].flags & I2C_M_RD) {
+ char buf[msgs[i].len];
+ memcpy(buf,msgs[i].buf, msgs[i].len-1);
+ buf[msgs[i].len-1]=0;
+
+ /* Read bytes */
+ /* I2C is assumed to have always a subaddr at the first byte of the
+ message bus. Also, the first i2c value of the answer is returned
+ out of message data.
+ */
+ rc = tm6000_read_write_usb (dev,
+ USB_DIR_IN | USB_TYPE_VENDOR,
+ REQ_16_SET_GET_I2CSEQ,
+ addr|(*msgs[i].buf)<<8, 0,
+ msgs[i].buf, msgs[i].len);
+ if (i2c_debug>=2) {
+ for (byte = 0; byte < msgs[i].len; byte++) {
+ printk(" %02x", msgs[i].buf[byte]);
+ }
+ }
+ } else {
+ /* write bytes */
+ if (i2c_debug>=2) {
+ for (byte = 0; byte < msgs[i].len; byte++)
+ printk(" %02x", msgs[i].buf[byte]);
+ }
+
+ rc = tm6000_read_write_usb (dev,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_16_SET_GET_I2CSEQ,
+ addr|(*msgs[i].buf)<<8, 0,
+ msgs[i].buf+1, msgs[i].len-1);
+ }
+ if (i2c_debug>=2)
+ printk("\n");
+ if (rc < 0)
+ goto err;
+ }
+
+ return num;
+err:
+ i2c_dprintk(2," ERROR: %i\n", rc);
+ return rc;
+}
+
+
+static int tm6000_i2c_eeprom( struct tm6000_core *dev,
+ unsigned char *eedata, int len )
+{
+ int i, rc;
+ unsigned char *p = eedata;
+ unsigned char bytes[17];
+
+ dev->i2c_client.addr = 0xa0 >> 1;
+
+//006779: OUT: 000006 ms 089867 ms c0 0e a0 00 00 00 01 00 <<< 00
+//006780: OUT: 000005 ms 089873 ms c0 10 a0 00 00 00 01 00 <<< 00
+//006781: OUT: 000108 ms 089878 ms 40 0e a0 00 00 00 01 00 >>> 99
+//006782: OUT: 000015 ms 089986 ms c0 0e a0 00 01 00 01 00 <<< 99
+//006783: OUT: 000004 ms 090001 ms c0 0e a0 00 10 00 01 00 <<< 99
+//006784: OUT: 000005 ms 090005 ms 40 10 a0 00 00 00 01 00 >>> 00
+//006785: OUT: 000308 ms 090010 ms 40 0e a0 00 00 00 01 00 >>> 00
+
+
+ for (i = 0; i < len; i++) {
+ bytes[0x14+i] = 0;
+
+ rc = i2c_master_recv(&dev->i2c_client, p, 1);
+ if (rc<1) {
+ if (p==eedata) {
+ printk (KERN_WARNING "%s doesn't have eeprom",
+ dev->name);
+ } else {
+ printk(KERN_WARNING
+ "%s: i2c eeprom read error (err=%d)\n",
+ dev->name, rc);
+ }
+ return -1;
+ }
+ p++;
+ if (0 == (i % 16))
+ printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
+ printk(" %02x", eedata[i]);
+ if ((eedata[i]>=' ')&&(eedata[i]<='z')) {
+ bytes[i%16]=eedata[i];
+ } else {
+ bytes[i%16]='.';
+ }
+ if (15 == (i % 16)) {
+ bytes[i%16]='\0';
+ printk(" %s\n", bytes);
+ }
+ }
+ if ((i%16)!=15) {
+ bytes[i%16]='\0';
+ printk(" %s\n", bytes);
+ }
+ return 0;
+}
+
+/* ----------------------------------------------------------- */
+
+/*
+ * algo_control()
+ */
+static int algo_control(struct i2c_adapter *adapter,
+ unsigned int cmd, unsigned long arg)
+{
+ return 0;
+}
+
+/*
+ * functionality()
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+#ifndef I2C_PEC
+static void inc_use(struct i2c_adapter *adap)
+{
+ MOD_INC_USE_COUNT;
+}
+
+static void dec_use(struct i2c_adapter *adap)
+{
+ MOD_DEC_USE_COUNT;
+}
+#endif
+
+#define mass_write(addr, reg, data...) \
+ { const static u8 _val[] = data; \
+ rc=tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR, \
+ REQ_16_SET_GET_I2CSEQ,(reg<<8)+addr, 0x00, (u8 *) _val, \
+ ARRAY_SIZE(_val)); \
+ if (rc<0) { \
+ printk(KERN_ERR "Error on line %d: %d\n",__LINE__,rc); \
+ return rc; \
+ } \
+ msleep (10); \
+ }
+
+int static init_zl10353 (struct tm6000_core *dev, u8 addr)
+{
+ int rc=0;
+
+ mass_write (addr, 0x89, { 0x38 });
+ mass_write (addr, 0x8a, { 0x2d });
+ mass_write (addr, 0x50, { 0xff });
+ mass_write (addr, 0x51, { 0x00 , 0x00 , 0x50 });
+ mass_write (addr, 0x54, { 0x72 , 0x49 });
+ mass_write (addr, 0x87, { 0x0e , 0x0e });
+ mass_write (addr, 0x7b, { 0x04 });
+ mass_write (addr, 0x57, { 0xb8 , 0xc2 });
+ mass_write (addr, 0x59, { 0x00 , 0x02 , 0x00 , 0x00 , 0x01 });
+ mass_write (addr, 0x59, { 0x00 , 0x00 , 0xb3 , 0xd0 , 0x01 });
+ mass_write (addr, 0x58, { 0xc0 , 0x11 , 0xc5 , 0xc2 , 0xa4 , 0x01 });
+ mass_write (addr, 0x5e, { 0x01 });
+ mass_write (addr, 0x67, { 0x1c , 0x20 });
+ mass_write (addr, 0x75, { 0x33 });
+ mass_write (addr, 0x85, { 0x10 , 0x40 });
+ mass_write (addr, 0x8c, { 0x0b , 0x00 , 0x40 , 0x00 });
+
+ return 0;
+}
+
+/* Tuner callback to provide the proper gpio changes needed for xc2028 */
+
+static int tm6000_tuner_callback(void *ptr, int command, int arg)
+{
+ int rc=0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type!=TUNER_XC2028)
+ return 0;
+
+ switch (command) {
+ case XC2028_RESET_CLK:
+ tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, arg);
+ msleep(10);
+ rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 0);
+ if (rc<0)
+ return rc;
+ msleep(10);
+ rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 1);
+ break;
+ case XC2028_TUNER_RESET:
+ /* Reset codes during load firmware */
+ switch (arg) {
+ case 0:
+ tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_1, 0x00);
+ msleep(10);
+ tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_1, 0x01);
+ break;
+ case 1:
+ tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, 0x01);
+ msleep(10);
+ break;
+
+ case 2:
+ rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 0);
+ if (rc<0)
+ return rc;
+ msleep(10);
+ rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ TM6000_GPIO_CLK, 1);
+ break;
+ }
+ }
+ return (rc);
+}
+
+static int attach_inform(struct i2c_client *client)
+{
+ struct tm6000_core *dev = client->adapter->algo_data;
+ struct tuner_setup tun_setup;
+ unsigned char eedata[11];
+
+ i2c_dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
+ client->driver->driver.name, client->addr, client->name);
+
+ switch (client->addr<<1) {
+ case 0x1e:
+ init_zl10353 (dev, client->addr);
+ return 0;
+ case 0xa0:
+ tm6000_i2c_eeprom(dev, eedata, sizeof(eedata)-1);
+ eedata[sizeof(eedata)]='\0';
+
+ printk("Board string ID = %s\n",eedata);
+ return 0;
+ case 0xb0:
+ request_module("tvaudio");
+ return 0;
+ }
+
+ /* If tuner, initialize the tuner part */
+ if ( dev->tuner_addr != client->addr<<1 ) {
+ return 0;
+ }
+
+ memset (&tun_setup, 0, sizeof(tun_setup));
+
+ tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr>>1;
+ tun_setup.tuner_callback = tm6000_tuner_callback;
+
+ client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup);
+
+ return 0;
+}
+
+static struct i2c_algorithm tm6000_algo = {
+ .master_xfer = tm6000_i2c_xfer,
+ .algo_control = algo_control,
+ .functionality = functionality,
+};
+
+static struct i2c_adapter tm6000_adap_template = {
+#ifdef I2C_PEC
+ .owner = THIS_MODULE,
+#else
+ .inc_use = inc_use,
+ .dec_use = dec_use,
+#endif
+ .class = I2C_CLASS_TV_ANALOG,
+ .name = "tm6000",
+ .id = I2C_HW_B_TM6000,
+ .algo = &tm6000_algo,
+ .client_register = attach_inform,
+};
+
+static struct i2c_client tm6000_client_template = {
+ .name = "tm6000 internal",
+};
+
+/* ----------------------------------------------------------- */
+
+/*
+ * i2c_devs
+ * incomplete list of known devices
+ */
+static char *i2c_devs[128] = {
+ [0xc2 >> 1] = "tuner (analog)",
+};
+
+/*
+ * do_i2c_scan()
+ * check i2c address range for devices
+ */
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+ unsigned char buf;
+ int i, rc;
+
+ for (i = 0; i < 128; i++) {
+ c->addr = i;
+ rc = i2c_master_recv(c, &buf, 0);
+ if (rc < 0)
+ continue;
+ printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n", name,
+ i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+ }
+}
+
+/*
+ * tm6000_i2c_call_clients()
+ * send commands to all attached i2c devices
+ */
+void tm6000_i2c_call_clients(struct tm6000_core *dev, unsigned int cmd, void *arg)
+{
+ BUG_ON(NULL == dev->i2c_adap.algo_data);
+ i2c_clients_command(&dev->i2c_adap, cmd, arg);
+}
+
+/*
+ * tm6000_i2c_register()
+ * register i2c bus
+ */
+int tm6000_i2c_register(struct tm6000_core *dev)
+{
+ dev->i2c_adap = tm6000_adap_template;
+ dev->i2c_adap.dev.parent = &dev->udev->dev;
+ strcpy(dev->i2c_adap.name, dev->name);
+ dev->i2c_adap.algo_data = dev;
+ i2c_add_adapter(&dev->i2c_adap);
+
+ dev->i2c_client = tm6000_client_template;
+ dev->i2c_client.adapter = &dev->i2c_adap;
+
+ if (i2c_scan)
+ do_i2c_scan(dev->name, &dev->i2c_client);
+
+ return 0;
+}
+
+/*
+ * tm6000_i2c_unregister()
+ * unregister i2c_bus
+ */
+int tm6000_i2c_unregister(struct tm6000_core *dev)
+{
+ i2c_del_adapter(&dev->i2c_adap);
+ return 0;
+}
--- /dev/null
+/*
+ tm6000-regs.h - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Define TV Master TM5600/TM6000 Request codes
+ */
+#define REQ_00_SET_IR_VALUE 0
+#define REQ_01_SET_WAKEUP_IRCODE 1
+#define REQ_02_GET_IR_CODE 2
+#define REQ_03_SET_GET_MCU_PIN 3
+#define REQ_04_EN_DISABLE_MCU_INT 4
+#define REQ_05_SET_GET_USBREG 5
+ /* Write: RegNum, Value, 0 */
+ /* Read : RegNum, Value, 1, RegStatus */
+#define REQ_06_SET_GET_USBREG_BIT 6
+#define REQ_07_SET_GET_AVREG 7
+ /* Write: RegNum, Value, 0 */
+ /* Read : RegNum, Value, 1, RegStatus */
+#define REQ_08_SET_GET_AVREG_BIT 8
+#define REQ_09_SET_GET_TUNER_FQ 9
+#define REQ_10_SET_TUNER_SYSTEM 10
+#define REQ_11_SET_EEPROM_ADDR 11
+#define REQ_12_SET_GET_EEPROMBYTE 12
+#define REQ_13_GET_EEPROM_SEQREAD 13
+#define REQ_14_SET_GET_EEPROM_PAGE 14
+#define REQ_15_SET_GET_I2CBYTE 15
+ /* Write: Subaddr, Slave Addr, value, 0 */
+ /* Read : Subaddr, Slave Addr, value, 1 */
+#define REQ_16_SET_GET_I2CSEQ 16
+ /* Subaddr, Slave Addr, 0, length */
+#define REQ_17_SET_GET_I2CFP 17
+ /* Write: Slave Addr, register, value */
+ /* Read : Slave Addr, register, 2, data */
+
+/*
+ * Define TV Master TM5600/TM6000 GPIO lines
+ */
+
+#define TM6000_GPIO_CLK 0x101
+#define TM6000_GPIO_DATA 0x100
+#define TM6000_GPIO_1 0x102
+#define TM6000_GPIO_2 0x103
+#define TM6000_GPIO_3 0x104
+#define TM6000_GPIO_4 0x300
+#define TM6000_GPIO_5 0x301
+#define TM6000_GPIO_6 0x304
+#define TM6000_GPIO_7 0x305
+
+/*
+ * Define TV Master TM5600/TM6000 URB message codes and length
+ */
+
+#define TM6000_URB_MSG_LEN 180
+enum {
+ TM6000_URB_MSG_VIDEO=1,
+ TM6000_URB_MSG_AUDIO,
+ TM6000_URB_MSG_VBI,
+ TM6000_URB_MSG_PTS,
+ TM6000_URB_MSG_ERR,
+};
--- /dev/null
+/*
+ tm6000-buf.c - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/videodev2.h>
+
+struct usb_isoc_ctl {
+ /* max packet size of isoc transaction */
+ int max_pkt_size;
+
+ /* number of allocated urbs */
+ int num_bufs;
+
+ /* urb for isoc transfers */
+ struct urb **urb;
+
+ /* transfer buffers for isoc transfer */
+ char **transfer_buffer;
+
+ /* Last buffer command and region */
+ u8 cmd;
+ int pos, size, pktsize;
+
+ /* Last field: ODD or EVEN? */
+ int field;
+};
--- /dev/null
+/*
+ tm6000-video.c - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+#include <linux/videodev.h>
+#endif
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/highmem.h>
+#include <linux/freezer.h>
+
+#include "tm6000-regs.h"
+#include "tm6000.h"
+
+#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
+
+/* Declare static vars that will be used as parameters */
+static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
+static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
+
+unsigned long tm6000_devused;
+
+/* Debug level */
+int tm6000_debug;
+
+/* supported controls */
+static struct v4l2_queryctrl tm6000_qctrl[] = {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = 54,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 0x1,
+ .default_value = 119,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 0x1,
+ .default_value = 112,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_HUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Hue",
+ .minimum = -128,
+ .maximum = 127,
+ .step = 0x1,
+ .default_value = 0, //4 ?
+ .flags = 0,
+ }
+};
+
+static int qctl_regs[ARRAY_SIZE(tm6000_qctrl)];
+
+static struct tm6000_fmt format[] = {
+ {
+ .name = "4:2:2, packed, YVY2",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .depth = 16,
+ },{
+ .name = "4:2:2, packed, UYVY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ },{
+ .name = "A/V + VBI mux packet",
+ .fourcc = V4L2_PIX_FMT_TM6000,
+ .depth = 16,
+ }
+};
+
+static LIST_HEAD(tm6000_corelist);
+
+/* ------------------------------------------------------------------
+ DMA and thread functions
+ ------------------------------------------------------------------*/
+
+#define norm_maxw(a) 720
+#define norm_maxh(a) 480
+
+//#define norm_minw(a) norm_maxw(a)
+#define norm_minw(a) norm_maxw(a)
+#define norm_minh(a) norm_maxh(a)
+
+/*
+ * video-buf generic routine to get the next available buffer
+ */
+static int inline get_next_buf (struct tm6000_dmaqueue *dma_q,
+ struct tm6000_buffer **buf)
+{
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+
+ if (list_empty(&dma_q->active)) {
+ dprintk(dev, V4L2_DEBUG_QUEUE,"No active queue to serve\n");
+ return 0;
+ }
+
+ *buf = list_entry(dma_q->active.next,
+ struct tm6000_buffer, vb.queue);
+
+ /* Nobody is waiting something to be done, just return */
+ if (!waitqueue_active(&(*buf)->vb.done)) {
+ mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+ return -1;
+ }
+
+ return 1;
+}
+
+/*
+ * Announces that a buffer were filled and request the next
+ */
+static void inline buffer_filled (struct tm6000_core *dev,
+ struct tm6000_buffer *buf)
+{
+ /* Advice that buffer was filled */
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] wakeup\n",buf,buf->vb.i);
+ buf->vb.state = STATE_DONE;
+ buf->vb.field_count++;
+ do_gettimeofday(&buf->vb.ts);
+
+ list_del(&buf->vb.queue);
+ wake_up(&buf->vb.done);
+}
+
+/*
+ * Macro to allow copying data into the proper memory type
+ */
+
+#define bufcpy(buf,out_ptr,in_ptr,size) \
+ { \
+ if (__copy_to_user(out_ptr,in_ptr,size)!=0) \
+ tm6000_err("copy_to_user failed.\n"); \
+ }
+
+/*
+ * Identify the tm5600/6000 buffer header type and properly handles
+ */
+static int copy_streams(u8 *data, u8 *out_p, unsigned long len,
+ struct urb *urb, struct tm6000_buffer **buf)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+ u8 *ptr=data, *endp=data+len;
+ u8 c;
+ unsigned int cmd, cpysize, pktsize, size, field, block, line, pos=0;
+ unsigned long header;
+ int rc=0;
+
+ /* FIXME: this is the hardcoded window size
+ */
+ unsigned int linesize=720*2;
+
+//static int last_line=-2;
+
+ for (ptr=data; ptr<endp;) {
+ if (!dev->isoc_ctl.cmd) {
+ /* Seek for sync */
+ for (ptr+=3;ptr<endp;ptr++) {
+ if (*ptr==0x47) {
+ ptr-=3;
+ break;
+ }
+ }
+ if (ptr>=endp)
+ return rc;
+
+ /* Get message header */
+ header=*(unsigned long *)ptr;
+ ptr+=4;
+ c=(header>>24) & 0xff;
+
+ /* split the header fields */
+ size = (((header & 0x7e)<<1) -1) *4;
+ block = (header>>7) & 0xf;
+ field = (header>>11) & 0x1;
+ line = (header>>12) & 0x1ff;
+ cmd = (header>>21) & 0x7;
+
+ /* FIXME: Maximum possible line is 511.
+ * This doesn't seem to be enough for PAL standards
+ */
+
+ /* Validates header fields */
+ if(size>TM6000_URB_MSG_LEN)
+ size=TM6000_URB_MSG_LEN;
+ if(block>=8)
+ cmd = TM6000_URB_MSG_ERR;
+
+ /* FIXME: Mounts the image as field0+field1
+ * It should, instead, check if the user selected
+ * entrelaced or non-entrelaced mode
+ */
+ pos=((line<<1)+field)*linesize+
+ block*TM6000_URB_MSG_LEN;
+
+
+
+ /* Don't allow to write out of the buffer */
+ if (pos+TM6000_URB_MSG_LEN > (*buf)->vb.size)
+ cmd = TM6000_URB_MSG_ERR;
+
+ /* Prints debug info */
+ dprintk(dev, V4L2_DEBUG_ISOC, "size=%d, num=%d, "
+ " line=%d, field=%d\n",
+ size, block, line, field);
+
+ dev->isoc_ctl.cmd = cmd;
+ dev->isoc_ctl.size = size;
+ dev->isoc_ctl.pos = pos;
+ dev->isoc_ctl.pktsize = pktsize = TM6000_URB_MSG_LEN;
+ } else {
+ cmd = dev->isoc_ctl.cmd;
+ size= dev->isoc_ctl.size;
+ pos = dev->isoc_ctl.pos;
+ pktsize = dev->isoc_ctl.pktsize;
+ }
+ cpysize=(endp-ptr>size)?size:endp-ptr;
+
+ if (cpysize) {
+ /* handles each different URB message */
+ switch(cmd) {
+ case TM6000_URB_MSG_VIDEO:
+ /* Fills video buffer */
+ bufcpy(*buf,&out_p[pos],ptr,cpysize);
+ break;
+ }
+ }
+ if (cpysize<size) {
+ /* End of URB packet, but cmd processing is not
+ * complete. Preserve the state for a next packet
+ */
+ dev->isoc_ctl.pos = pos+cpysize;
+ dev->isoc_ctl.size= size-cpysize;
+ dev->isoc_ctl.cmd = cmd;
+ dev->isoc_ctl.pktsize = pktsize-cpysize;
+ ptr+=cpysize;
+ } else {
+ dev->isoc_ctl.cmd = 0;
+ ptr+=pktsize;
+ }
+ }
+
+ return rc;
+}
+/*
+ * Identify the tm5600/6000 buffer header type and properly handles
+ */
+static int copy_multiplexed(u8 *ptr, u8 *out_p, unsigned long len,
+ struct urb *urb, struct tm6000_buffer **buf)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+ unsigned int pos=dev->isoc_ctl.pos,cpysize;
+ int rc=1;
+
+ while (len>0) {
+ cpysize=min(len,(*buf)->vb.size-pos);
+//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
+ bufcpy(*buf,&out_p[pos],ptr,cpysize);
+ pos+=cpysize;
+ ptr+=cpysize;
+ len-=cpysize;
+ if (pos >= (*buf)->vb.size) {
+ pos=0;
+ /* Announces that a new buffer were filled */
+ buffer_filled (dev, *buf);
+ dprintk(dev, V4L2_DEBUG_QUEUE, "new buffer filled\n");
+
+ rc=get_next_buf (dma_q, buf);
+ if (rc<=0) {
+ *buf=NULL;
+ printk(KERN_ERR "tm6000: buffer underrun\n");
+ break;
+ }
+ }
+ }
+
+ dev->isoc_ctl.pos=pos;
+ return rc;
+}
+
+/*
+ * Controls the isoc copy of each urb packet
+ */
+static inline int tm6000_isoc_copy(struct urb *urb, struct tm6000_buffer **buf)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+ void *outp=videobuf_to_vmalloc (&((*buf)->vb));
+ int i, len=0, rc=1;
+ int size=(*buf)->vb.size;
+ char *p;
+ unsigned long copied;
+
+ copied=0;
+
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ int status = urb->iso_frame_desc[i].status;
+ char *errmsg = "Unknown";
+
+ switch(status) {
+ case -ENOENT:
+ errmsg = "unlinked synchronuously";
+ break;
+ case -ECONNRESET:
+ errmsg = "unlinked asynchronuously";
+ break;
+ case -ENOSR:
+ errmsg = "Buffer error (overrun)";
+ break;
+ case -EPIPE:
+ errmsg = "Stalled (device not responding)";
+ break;
+ case -EOVERFLOW:
+ errmsg = "Babble (bad cable?)";
+ break;
+ case -EPROTO:
+ errmsg = "Bit-stuff error (bad cable?)";
+ break;
+ case -EILSEQ:
+ errmsg = "CRC/Timeout (could be anything)";
+ break;
+ case -ETIME:
+ errmsg = "Device does not respond";
+ break;
+ }
+ dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n",
+ status, errmsg);
+
+ if (status<0)
+ continue;
+
+ len=urb->iso_frame_desc[i].actual_length;
+
+ if (len>=TM6000_URB_MSG_LEN) {
+ p=urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ if (!urb->iso_frame_desc[i].status) {
+ if (((*buf)->fmt->fourcc)==V4L2_PIX_FMT_TM6000) {
+ rc=copy_multiplexed(p,outp,len,urb,buf);
+ if (rc<=0)
+ return rc;
+ } else {
+ rc=copy_streams(p,outp,len,urb,buf);
+ }
+ }
+ copied += len;
+ if (copied>=size)
+ break;
+ }
+ }
+
+ if (((*buf)->fmt->fourcc)!=V4L2_PIX_FMT_TM6000) {
+ buffer_filled (dev, *buf);
+ dprintk(dev, V4L2_DEBUG_QUEUE, "new buffer filled\n");
+ }
+
+ return rc;
+}
+
+/* ------------------------------------------------------------------
+ URB control
+ ------------------------------------------------------------------*/
+
+/*
+ * IRQ callback, called by URB callback
+ */
+static void tm6000_irq_callback(struct urb *urb)
+{
+ struct tm6000_buffer *buf;
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+ int rc,i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->slock,flags);
+
+ rc=get_next_buf (dma_q, &buf);
+ if (rc<=0)
+ goto ret;
+
+ /* Copy data from URB */
+ rc=tm6000_isoc_copy(urb, &buf);
+
+ret:
+ /* Reset urb buffers */
+ for (i = 0; i < urb->number_of_packets; i++) {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+ urb->status = 0;
+
+ if ((urb->status = usb_submit_urb(urb, GFP_ATOMIC))) {
+ tm6000_err("urb resubmit failed (error=%i)\n",
+ urb->status);
+ }
+
+ if (rc>=0) {
+ if (!rc) {
+ dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n");
+ del_timer(&dma_q->timeout);
+ } else {
+ /* Data filled, reset watchdog */
+ mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+ }
+ }
+ spin_unlock_irqrestore(&dev->slock,flags);
+}
+
+/*
+ * Stop and Deallocate URBs
+ */
+static void tm6000_uninit_isoc(struct tm6000_core *dev)
+{
+ struct urb *urb;
+ int i;
+
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ urb=dev->isoc_ctl.urb[i];
+ if (urb) {
+ usb_kill_urb(urb);
+ usb_unlink_urb(urb);
+ if (dev->isoc_ctl.transfer_buffer[i]) {
+ usb_buffer_free(dev->udev,
+ urb->transfer_buffer_length,
+ dev->isoc_ctl.transfer_buffer[i],
+ urb->transfer_dma);
+ }
+ usb_free_urb(urb);
+ dev->isoc_ctl.urb[i] = NULL;
+ }
+ dev->isoc_ctl.transfer_buffer[i] = NULL;
+ }
+
+ kfree (dev->isoc_ctl.urb);
+ kfree (dev->isoc_ctl.transfer_buffer);
+ dev->isoc_ctl.urb=NULL;
+ dev->isoc_ctl.transfer_buffer=NULL;
+
+ dev->isoc_ctl.num_bufs=0;
+}
+
+/*
+ * Stop video thread - FIXME: Can be easily removed
+ */
+static void tm6000_stop_thread(struct tm6000_dmaqueue *dma_q)
+{
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+
+ tm6000_uninit_isoc(dev);
+}
+
+
+/*
+ * Allocate URBs and start IRQ
+ */
+static int tm6000_prepare_isoc(struct tm6000_core *dev,
+ int max_packets, int num_bufs)
+{
+ struct tm6000_dmaqueue *dma_q = &dev->vidq;
+ int i;
+ int sb_size, pipe;
+ struct urb *urb;
+ int j, k;
+
+ /* De-allocates all pending stuff */
+ tm6000_uninit_isoc(dev);
+
+ dev->isoc_ctl.num_bufs=num_bufs;
+
+ dev->isoc_ctl.urb=kmalloc(sizeof(void *)*num_bufs,
+ GFP_KERNEL);
+ if (!dev->isoc_ctl.urb) {
+ tm6000_err("cannot alloc memory for usb buffers\n");
+ return -ENOMEM;
+ }
+
+ dev->isoc_ctl.transfer_buffer=kmalloc(sizeof(void *)*num_bufs,
+ GFP_KERNEL);
+ if (!dev->isoc_ctl.urb) {
+ tm6000_err("cannot allocate memory for usbtransfer\n");
+ kfree(dev->isoc_ctl.urb);
+ return -ENOMEM;
+ }
+
+ dev->isoc_ctl.max_pkt_size=dev->max_isoc_in;
+
+ sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
+
+
+ /* allocate urbs and transfer buffers */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ urb = usb_alloc_urb(max_packets, GFP_KERNEL);
+ if (!urb) {
+ tm6000_err("cannot alloc isoc_ctl.urb %i\n", i);
+ tm6000_uninit_isoc(dev);
+ return -ENOMEM;
+ }
+ dev->isoc_ctl.urb[i] = urb;
+
+ dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev,
+ sb_size, GFP_KERNEL,
+ &dev->isoc_ctl.urb[i]->transfer_dma);
+ if (!dev->isoc_ctl.transfer_buffer[i]) {
+ tm6000_err ("unable to allocate %i bytes for transfer"
+ " buffer %i\n", sb_size, i);
+ tm6000_uninit_isoc(dev);
+ return -ENOMEM;
+ }
+ memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
+
+ pipe=usb_rcvisocpipe(dev->udev,
+ dev->isoc_in->desc.bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK);
+ usb_fill_int_urb(urb, dev->udev, pipe,
+ dev->isoc_ctl.transfer_buffer[i],sb_size,
+ tm6000_irq_callback, dma_q,
+ dev->isoc_in->desc.bInterval);
+
+ urb->number_of_packets = max_packets;
+ urb->transfer_flags = URB_ISO_ASAP;
+
+ k = 0;
+ for (j = 0; j < max_packets; j++) {
+ urb->iso_frame_desc[j].offset = k;
+ urb->iso_frame_desc[j].length =
+ dev->isoc_ctl.max_pkt_size;
+ k += dev->isoc_ctl.max_pkt_size;
+ }
+ }
+
+ return 0;
+}
+
+static int tm6000_start_thread( struct tm6000_dmaqueue *dma_q,
+ struct tm6000_buffer *buf)
+{
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+ int i,rc;
+
+ dma_q->frame=0;
+ dma_q->ini_jiffies=jiffies;
+
+ init_waitqueue_head(&dma_q->wq);
+
+ /* submit urbs and enables IRQ */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_KERNEL);
+ if (rc) {
+ tm6000_err("submit of urb %i failed (error=%i)\n", i,
+ rc);
+ tm6000_uninit_isoc(dev);
+ return rc;
+ }
+ }
+
+ if (rc<0)
+ return rc;
+
+ return 0;
+}
+
+static int restart_video_queue(struct tm6000_dmaqueue *dma_q)
+{
+ struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
+
+ struct tm6000_buffer *buf, *prev;
+ struct list_head *item;
+
+ dprintk(dev, V4L2_DEBUG_QUEUE, "%s dma_q=0x%08lx\n",
+ __FUNCTION__,(unsigned long)dma_q);
+
+ if (!list_empty(&dma_q->active)) {
+ buf = list_entry(dma_q->active.next, struct tm6000_buffer, vb.queue);
+ dprintk(dev, V4L2_DEBUG_QUEUE,
+ "restart_queue [%p/%d]: restart dma\n", buf, buf->vb.i);
+
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Restarting video dma\n");
+ tm6000_stop_thread(dma_q);
+ tm6000_start_thread(dma_q, buf);
+
+ /* cancel all outstanding capture / vbi requests */
+ list_for_each(item,&dma_q->active) {
+ buf = list_entry(item, struct tm6000_buffer, vb.queue);
+
+ list_del(&buf->vb.queue);
+ buf->vb.state = STATE_ERROR;
+ wake_up(&buf->vb.done);
+ }
+ mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+
+ return 0;
+ }
+
+ prev = NULL;
+ for (;;) {
+ if (list_empty(&dma_q->queued))
+ return 0;
+ buf = list_entry(dma_q->queued.next, struct tm6000_buffer, vb.queue);
+ if (NULL == prev) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue,&dma_q->active);
+
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Restarting video dma\n");
+ tm6000_stop_thread(dma_q);
+ tm6000_start_thread(dma_q, buf);
+
+ buf->vb.state = STATE_ACTIVE;
+ mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] restart_queue -"
+ " first active\n", buf, buf->vb.i);
+
+ } else if (prev->vb.width == buf->vb.width &&
+ prev->vb.height == buf->vb.height &&
+ prev->fmt == buf->fmt) {
+ list_del(&buf->vb.queue);
+ list_add_tail(&buf->vb.queue,&dma_q->active);
+ buf->vb.state = STATE_ACTIVE;
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] restart_queue -"
+ " move to active\n",buf,buf->vb.i);
+ } else {
+ return 0;
+ }
+ prev = buf;
+ }
+}
+
+static void tm6000_vid_timeout(unsigned long data)
+{
+ struct tm6000_core *dev = (struct tm6000_core*)data;
+ struct tm6000_dmaqueue *vidq = &dev->vidq;
+ struct tm6000_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->slock,flags);
+ while (!list_empty(&vidq->active)) {
+ buf = list_entry(vidq->active.next, struct tm6000_buffer,
+ vb.queue);
+ list_del(&buf->vb.queue);
+ buf->vb.state = STATE_ERROR;
+ wake_up(&buf->vb.done);
+ dprintk(dev, V4L2_DEBUG_QUEUE, "tm6000/0: [%p/%d] timeout\n",
+ buf, buf->vb.i);
+ }
+
+ restart_video_queue(vidq);
+ spin_unlock_irqrestore(&dev->slock,flags);
+}
+
+/* ------------------------------------------------------------------
+ Videobuf operations
+ ------------------------------------------------------------------*/
+static int
+buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
+{
+ struct tm6000_fh *fh = vq->priv_data;
+
+ *size = fh->fmt->depth * fh->width * fh->height >> 3;
+ if (0 == *count)
+ *count = 32;
+ while (*size * *count > vid_limit * 1024 * 1024)
+ (*count)--;
+ return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf)
+{
+ if (in_interrupt())
+ BUG();
+
+ videobuf_waiton(&buf->vb,0,0);
+ videobuf_vmalloc_free(&buf->vb);
+ buf->vb.state = STATE_NEEDS_INIT;
+}
+
+static int
+buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+ enum v4l2_field field)
+{
+ struct tm6000_fh *fh = vq->priv_data;
+ struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb);
+ struct tm6000_core *dev = fh->dev;
+ int rc=0, urbsize, urb_init=0;
+
+ BUG_ON(NULL == fh->fmt);
+
+ if (fh->width < norm_minw(core) || fh->width > norm_maxw(core) ||
+ fh->height < norm_minh(core) || fh->height > norm_maxh(core)) {
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Window size (%dx%d) is out of "
+ "supported range\n", fh->width, fh->height);
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Valid range is from (%dx%d) to "
+ "(%dx%d)\n", norm_minw(core), norm_minh(core),
+ norm_maxw(core),norm_maxh(core));
+ return -EINVAL;
+ }
+
+ /* FIXME: It assumes depth=2 */
+ /* The only currently supported format is 16 bits/pixel */
+ buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3;
+ if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
+ return -EINVAL;
+
+ if (buf->fmt != fh->fmt ||
+ buf->vb.width != fh->width ||
+ buf->vb.height != fh->height ||
+ buf->vb.field != field) {
+ buf->fmt = fh->fmt;
+ buf->vb.width = fh->width;
+ buf->vb.height = fh->height;
+ buf->vb.field = field;
+ buf->vb.state = STATE_NEEDS_INIT;
+ }
+
+ if (STATE_NEEDS_INIT == buf->vb.state) {
+ if (0 != (rc = videobuf_iolock(vq,&buf->vb,NULL)))
+ goto fail;
+ urb_init=1;
+ }
+
+
+ if (!dev->isoc_ctl.num_bufs)
+ urb_init=1;
+
+ if (urb_init) {
+ /* Should allocate/request at least h
+ res x v res x 2 bytes/pixel */
+ urbsize=(buf->vb.size+dev->max_isoc_in-1)/dev->max_isoc_in;
+
+ /* Hack to allocate memory for Video + Audio */
+ /* FIXME: should also consider header ovehead of
+ 4 bytes/180 bytes */
+ urbsize+=((48000*4+24)/25+dev->max_isoc_in-1)/dev->max_isoc_in;
+
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d packets to handle "
+ "%lu size\n", urbsize,buf->vb.size);
+ rc = tm6000_prepare_isoc(dev, urbsize, 2);
+
+ if (rc<0)
+ goto fail;
+ }
+
+ buf->vb.state = STATE_PREPARED;
+ return 0;
+
+fail:
+ free_buffer(vq,buf);
+ return rc;
+}
+
+static void
+buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+ struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb);
+ struct tm6000_fh *fh = vq->priv_data;
+ struct tm6000_core *dev = fh->dev;
+ struct tm6000_dmaqueue *vidq = &dev->vidq;
+ struct tm6000_buffer *prev;
+
+ if (!list_empty(&vidq->queued)) {
+ list_add_tail(&buf->vb.queue,&vidq->queued);
+ buf->vb.state = STATE_QUEUED;
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] buffer_queue - "
+ "append to queued\n", buf, buf->vb.i);
+ } else if (list_empty(&vidq->active)) {
+ list_add_tail(&buf->vb.queue,&vidq->active);
+ buf->vb.state = STATE_ACTIVE;
+ mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT);
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] buffer_queue - "
+ "first active\n", buf, buf->vb.i);
+ tm6000_start_thread(vidq, buf);
+ } else {
+ prev = list_entry(vidq->active.prev, struct tm6000_buffer, vb.queue);
+ if (prev->vb.width == buf->vb.width &&
+ prev->vb.height == buf->vb.height &&
+ prev->fmt == buf->fmt) {
+ list_add_tail(&buf->vb.queue,&vidq->active);
+ buf->vb.state = STATE_ACTIVE;
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] buffer_queue -"
+ " append to active\n", buf, buf->vb.i);
+ } else {
+ list_add_tail(&buf->vb.queue,&vidq->queued);
+ buf->vb.state = STATE_QUEUED;
+ dprintk(dev, V4L2_DEBUG_QUEUE, "[%p/%d] buffer_queue -"
+ " first queued\n", buf, buf->vb.i);
+ }
+ }
+}
+
+static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+ struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb);
+ struct tm6000_fh *fh = vq->priv_data;
+ struct tm6000_core *dev = (struct tm6000_core*)fh->dev;
+ struct tm6000_dmaqueue *vidq = &dev->vidq;
+
+ tm6000_stop_thread(vidq);
+
+ free_buffer(vq,buf);
+}
+
+static struct videobuf_queue_ops tm6000_video_qops = {
+ .buf_setup = buffer_setup,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .buf_release = buffer_release,
+};
+
+/* ------------------------------------------------------------------
+ IOCTL handling
+ ------------------------------------------------------------------*/
+
+static int res_get(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+ /* is it free? */
+ mutex_lock(&dev->lock);
+ if (dev->resources) {
+ /* no, someone else uses it */
+ mutex_unlock(&dev->lock);
+ return 0;
+ }
+ /* it's free, grab it */
+ dev->resources =1;
+ dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n");
+ mutex_unlock(&dev->lock);
+ return 1;
+}
+
+static int res_locked(struct tm6000_core *dev)
+{
+ return (dev->resources);
+}
+
+static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+ mutex_lock(&dev->lock);
+ dev->resources = 0;
+ dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n");
+ mutex_unlock(&dev->lock);
+}
+
+/* ------------------------------------------------------------------
+ IOCTL vidioc handling
+ ------------------------------------------------------------------*/
+static int vidioc_querycap (struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ // struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
+
+ strlcpy(cap->driver, "tm6000", sizeof(cap->driver));
+ strlcpy(cap->card,"Trident TVMaster TM5600/6000", sizeof(cap->card));
+ // strlcpy(cap->bus_info, dev->udev->dev.bus_id, sizeof(cap->bus_info));
+ cap->version = TM6000_VERSION;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_STREAMING |
+ V4L2_CAP_TUNER |
+ V4L2_CAP_READWRITE;
+ return 0;
+}
+
+static int vidioc_enum_fmt_cap (struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (unlikely(f->index >= ARRAY_SIZE(format)))
+ return -EINVAL;
+
+ strlcpy(f->description,format[f->index].name,sizeof(f->description));
+ f->pixelformat = format[f->index].fourcc;
+ return 0;
+}
+
+static int vidioc_g_fmt_cap (struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tm6000_fh *fh=priv;
+
+ f->fmt.pix.width = fh->width;
+ f->fmt.pix.height = fh->height;
+ f->fmt.pix.field = fh->vb_vidq.field;
+ f->fmt.pix.pixelformat = fh->fmt->fourcc;
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * fh->fmt->depth) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+ return (0);
+}
+
+static struct tm6000_fmt* format_by_fourcc(unsigned int fourcc)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(format); i++)
+ if (format[i].fourcc == fourcc)
+ return format+i;
+ return NULL;
+}
+
+static int vidioc_try_fmt_cap (struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
+ struct tm6000_fmt *fmt;
+ enum v4l2_field field;
+
+ fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ if (NULL == fmt) {
+ dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Fourcc format (0x%08x)"
+ " invalid.\n", f->fmt.pix.pixelformat);
+ return -EINVAL;
+ }
+
+ field = f->fmt.pix.field;
+
+ if (field == V4L2_FIELD_ANY) {
+// field=V4L2_FIELD_INTERLACED;
+ field=V4L2_FIELD_SEQ_TB;
+ } else if (V4L2_FIELD_INTERLACED != field) {
+ dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Field type invalid.\n");
+ return -EINVAL;
+ }
+
+ if (f->fmt.pix.width < norm_minw(core))
+ f->fmt.pix.width = norm_minw(core);
+
+ if (f->fmt.pix.width > norm_maxw(core))
+ f->fmt.pix.width = norm_maxw(core);
+
+ if (f->fmt.pix.height < norm_minh(core))
+ f->fmt.pix.height = norm_minh(core);
+
+ if (f->fmt.pix.height > norm_maxh(core))
+ f->fmt.pix.height = norm_maxh(core);
+
+ f->fmt.pix.width &= ~0x01;
+
+ f->fmt.pix.field = field;
+
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * fmt->depth) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+ return 0;
+}
+
+/*FIXME: This seems to be generic enough to be at videodev2 */
+static int vidioc_s_fmt_cap (struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+ int ret = vidioc_try_fmt_cap(file,fh,f);
+ if (ret < 0)
+ return (ret);
+
+ fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ fh->width = f->fmt.pix.width;
+ fh->height = f->fmt.pix.height;
+ fh->vb_vidq.field = f->fmt.pix.field;
+ fh->type = f->type;
+
+ dev->fourcc = f->fmt.pix.pixelformat;
+
+ tm6000_set_fourcc_format(dev);
+
+ return (0);
+}
+
+static int vidioc_reqbufs (struct file *file, void *priv,
+ struct v4l2_requestbuffers *p)
+{
+ struct tm6000_fh *fh=priv;
+
+ return (videobuf_reqbufs(&fh->vb_vidq, p));
+}
+
+static int vidioc_querybuf (struct file *file, void *priv,
+ struct v4l2_buffer *p)
+{
+ struct tm6000_fh *fh=priv;
+
+ return (videobuf_querybuf(&fh->vb_vidq, p));
+}
+
+static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p)
+{
+ struct tm6000_fh *fh=priv;
+
+ return (videobuf_qbuf(&fh->vb_vidq, p));
+}
+
+static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p)
+{
+ struct tm6000_fh *fh=priv;
+
+ return (videobuf_dqbuf(&fh->vb_vidq, p,
+ file->f_flags & O_NONBLOCK));
+}
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
+{
+ struct tm6000_fh *fh=priv;
+
+ return videobuf_cgmbuf (&fh->vb_vidq, mbuf, 8);
+}
+#endif
+
+static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (i != fh->type)
+ return -EINVAL;
+
+ if (!res_get(dev,fh))
+ return -EBUSY;
+ return (videobuf_streamon(&fh->vb_vidq));
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (i != fh->type)
+ return -EINVAL;
+
+ videobuf_streamoff(&fh->vb_vidq);
+ res_free(dev,fh);
+
+ return (0);
+}
+
+static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm)
+{
+ int rc=0;
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+
+ rc=tm6000_set_standard (dev, norm);
+ if (rc<0)
+ return rc;
+
+ tm6000_i2c_call_clients(dev, VIDIOC_S_STD, &dev->norm);
+
+ return 0;
+}
+
+static int vidioc_enum_input (struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ switch (inp->index) {
+ case TM6000_INPUT_TV:
+ inp->type = V4L2_INPUT_TYPE_TUNER;
+ strcpy(inp->name,"Television");
+ break;
+ case TM6000_INPUT_COMPOSITE:
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ strcpy(inp->name,"Composite");
+ break;
+ case TM6000_INPUT_SVIDEO:
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ strcpy(inp->name,"S-Video");
+ break;
+ default:
+ return -EINVAL;
+ }
+ inp->std = TM6000_STD;
+
+ return 0;
+}
+
+static int vidioc_g_input (struct file *file, void *priv, unsigned int *i)
+{
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+
+ *i=dev->input;
+
+ return 0;
+}
+static int vidioc_s_input (struct file *file, void *priv, unsigned int i)
+{
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+ int rc=0;
+ char buf[1];
+
+ switch (i) {
+ case TM6000_INPUT_TV:
+ dev->input=i;
+ *buf=0;
+ break;
+ case TM6000_INPUT_COMPOSITE:
+ case TM6000_INPUT_SVIDEO:
+ dev->input=i;
+ *buf=1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ rc=tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+ REQ_03_SET_GET_MCU_PIN, 0x03, 1, buf, 1);
+
+ if (!rc) {
+ dev->input=i;
+ rc=vidioc_s_std (file, priv, &dev->vfd.current_norm);
+ }
+
+ return (rc);
+}
+
+ /* --- controls ---------------------------------------------- */
+static int vidioc_queryctrl (struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++)
+ if (qc->id && qc->id == tm6000_qctrl[i].id) {
+ memcpy(qc, &(tm6000_qctrl[i]),
+ sizeof(*qc));
+ return (0);
+ }
+
+ return -EINVAL;
+}
+
+static int vidioc_g_ctrl (struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct tm6000_fh *fh=priv;
+ struct tm6000_core *dev = fh->dev;
+ int val;
+
+ /* FIXME: Probably, those won't work! Maybe we need shadow regs */
+ switch (ctrl->id) {
+ case V4L2_CID_CONTRAST:
+ val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x08, 0);
+ break;
+ case V4L2_CID_BRIGHTNESS:
+ val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x09, 0);
+ return 0;
+ case V4L2_CID_SATURATION:
+ val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x0a, 0);
+ return 0;
+ case V4L2_CID_HUE:
+ val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x0b, 0);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+
+ if (val<0)
+ return val;
+
+ ctrl->value=val;
+
+ return 0;
+}
+static int vidioc_s_ctrl (struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct tm6000_fh *fh =priv;
+ struct tm6000_core *dev = fh->dev;
+ u8 val=ctrl->value;
+
+ switch (ctrl->id) {
+ case V4L2_CID_CONTRAST:
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x08, val);
+ return 0;
+ case V4L2_CID_BRIGHTNESS:
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x09, val);
+ return 0;
+ case V4L2_CID_SATURATION:
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0a, val);
+ return 0;
+ case V4L2_CID_HUE:
+ tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0b, val);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int vidioc_g_tuner (struct file *file, void *priv,
+ struct v4l2_tuner *t)
+{
+ struct tm6000_fh *fh =priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (unlikely(UNSET == dev->tuner_type))
+ return -EINVAL;
+ if (0 != t->index)
+ return -EINVAL;
+
+ strcpy(t->name, "Television");
+ t->type = V4L2_TUNER_ANALOG_TV;
+ t->capability = V4L2_TUNER_CAP_NORM;
+ t->rangehigh = 0xffffffffUL;
+ t->rxsubchans = V4L2_TUNER_SUB_MONO;
+
+ return 0;
+}
+
+static int vidioc_s_tuner (struct file *file, void *priv,
+ struct v4l2_tuner *t)
+{
+ struct tm6000_fh *fh =priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (UNSET == dev->tuner_type)
+ return -EINVAL;
+ if (0 != t->index)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int vidioc_g_frequency (struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct tm6000_fh *fh =priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (unlikely(UNSET == dev->tuner_type))
+ return -EINVAL;
+
+ f->type = V4L2_TUNER_ANALOG_TV;
+ f->frequency = dev->freq;
+
+ tm6000_i2c_call_clients(dev,VIDIOC_G_FREQUENCY,f);
+
+ return 0;
+}
+
+static int vidioc_s_frequency (struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct tm6000_fh *fh =priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+ return -EINVAL;
+
+ if (unlikely(UNSET == dev->tuner_type))
+ return -EINVAL;
+ if (unlikely(f->tuner != 0))
+ return -EINVAL;
+
+// mutex_lock(&dev->lock);
+ dev->freq = f->frequency;
+ tm6000_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,f);
+// mutex_unlock(&dev->lock);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------
+ File operations for the device
+ ------------------------------------------------------------------*/
+
+static int tm6000_open(struct inode *inode, struct file *file)
+{
+ int minor = iminor(inode);
+ struct tm6000_core *h,*dev = NULL;
+ struct tm6000_fh *fh;
+ struct list_head *list;
+ enum v4l2_buf_type type = 0;
+ int i,rc;
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called "
+ "(minor=%d)\n",minor);
+
+ list_for_each(list,&tm6000_corelist) {
+ h = list_entry(list, struct tm6000_core, tm6000_corelist);
+ if (h->vfd.minor == minor) {
+ dev = h;
+ type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ }
+ }
+ if (NULL == dev)
+ return -ENODEV;
+
+
+ /* If more than one user, mutex should be added */
+ dev->users++;
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "open minor=%d type=%s users=%d\n",
+ minor,v4l2_type_names[type],dev->users);
+
+ /* allocate + initialize per filehandle data */
+ fh = kzalloc(sizeof(*fh),GFP_KERNEL);
+ if (NULL == fh) {
+ dev->users--;
+ return -ENOMEM;
+ }
+
+ file->private_data = fh;
+ fh->dev = dev;
+
+ fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ dev->fourcc = format[0].fourcc;
+
+ fh->fmt = format_by_fourcc(dev->fourcc);
+ fh->width = norm_maxw();
+ fh->height = norm_maxh();
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, "
+ "dev->vidq=0x%08lx\n",
+ (unsigned long)fh,(unsigned long)dev,(unsigned long)&dev->vidq);
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
+ "queued=%d\n",list_empty(&dev->vidq.queued));
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
+ "active=%d\n",list_empty(&dev->vidq.active));
+
+ /* initialize hardware on analog mode */
+ if (dev->mode!=TM6000_MODE_ANALOG) {
+ rc=tm6000_init_analog_mode (dev);
+ if (rc<0)
+ return rc;
+
+ /* Put all controls at a sane state */
+ for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++)
+ qctl_regs[i] =tm6000_qctrl[i].default_value;
+
+ dev->mode=TM6000_MODE_ANALOG;
+ }
+
+ videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops,
+ NULL, &dev->slock,
+ fh->type,
+ V4L2_FIELD_INTERLACED,
+ sizeof(struct tm6000_buffer),fh);
+
+ return 0;
+}
+
+static ssize_t
+tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos)
+{
+ struct tm6000_fh *fh = file->private_data;
+
+ if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ if (res_locked(fh->dev))
+ return -EBUSY;
+
+ return videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0,
+ file->f_flags & O_NONBLOCK);
+ }
+ return 0;
+}
+
+static unsigned int
+tm6000_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_buffer *buf;
+
+ if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+ return POLLERR;
+
+ if (res_get(fh->dev,fh)) {
+ /* streaming capture */
+ if (list_empty(&fh->vb_vidq.stream))
+ return POLLERR;
+ buf = list_entry(fh->vb_vidq.stream.next,struct tm6000_buffer,vb.stream);
+ } else {
+ /* read() capture */
+ buf = (struct tm6000_buffer*)fh->vb_vidq.read_buf;
+ if (NULL == buf)
+ return POLLERR;
+ }
+ poll_wait(file, &buf->vb.done, wait);
+ if (buf->vb.state == STATE_DONE ||
+ buf->vb.state == STATE_ERROR)
+ return POLLIN|POLLRDNORM;
+ return 0;
+}
+
+static int tm6000_release(struct inode *inode, struct file *file)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_core *dev = fh->dev;
+ struct tm6000_dmaqueue *vidq = &dev->vidq;
+ int minor = iminor(inode);
+
+ tm6000_stop_thread(vidq);
+ videobuf_mmap_free(&fh->vb_vidq);
+
+ kfree (fh);
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (minor=%d, users=%d)\n",minor,dev->users);
+
+ return 0;
+}
+
+static int tm6000_mmap(struct file *file, struct vm_area_struct * vma)
+{
+ struct tm6000_fh *fh = file->private_data;
+ int ret;
+
+ ret=videobuf_mmap_mapper(&fh->vb_vidq, vma);
+
+ return ret;
+}
+
+static struct file_operations tm6000_fops = {
+ .owner = THIS_MODULE,
+ .open = tm6000_open,
+ .release = tm6000_release,
+ .ioctl = video_ioctl2, /* V4L2 ioctl handler */
+ .read = tm6000_read,
+ .poll = tm6000_poll,
+ .mmap = tm6000_mmap,
+ .llseek = no_llseek,
+};
+
+static struct video_device tm6000_template = {
+ .name = "tm6000",
+ .type = VID_TYPE_CAPTURE,
+ .fops = &tm6000_fops,
+ .minor = -1,
+ .release = video_device_release,
+
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap,
+ .vidioc_g_fmt_cap = vidioc_g_fmt_cap,
+ .vidioc_try_fmt_cap = vidioc_try_fmt_cap,
+ .vidioc_s_fmt_cap = vidioc_s_fmt_cap,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_enum_input = vidioc_enum_input,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+ .vidiocgmbuf = vidiocgmbuf,
+#endif
+ .tvnorms = TM6000_STD,
+ .current_norm = V4L2_STD_NTSC_M,
+};
+/* -----------------------------------------------------------------
+ Initialization and module stuff
+ ------------------------------------------------------------------*/
+
+int tm6000_v4l2_register(struct tm6000_core *dev)
+{
+ int ret;
+
+ list_add_tail(&dev->tm6000_corelist,&tm6000_corelist);
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&dev->vidq.active);
+ INIT_LIST_HEAD(&dev->vidq.queued);
+
+ dev->vidq.timeout.function = tm6000_vid_timeout;
+ dev->vidq.timeout.data = (unsigned long)dev;
+ init_timer(&dev->vidq.timeout);
+
+ memcpy (&dev->vfd, &tm6000_template, sizeof(dev->vfd));
+ dev->vfd.debug=tm6000_debug;
+
+ ret = video_register_device(&dev->vfd, VFL_TYPE_GRABBER, video_nr);
+ printk(KERN_INFO "Trident TVMaster TM5600/TM6000 USB2 board (Load status: %d)\n", ret);
+ return ret;
+}
+
+int tm6000_v4l2_unregister(struct tm6000_core *dev)
+{
+ struct tm6000_core *h;
+ struct list_head *list;
+
+ while (!list_empty(&tm6000_corelist)) {
+ list = tm6000_corelist.next;
+ h = list_entry(list, struct tm6000_core, tm6000_corelist);
+ if (h == dev) {
+ video_unregister_device(&dev->vfd);
+ list_del(list);
+ kfree (h);
+ }
+ }
+
+ return 0;
+}
+
+int tm6000_v4l2_exit(void)
+{
+ return 0;
+}
+
+module_param(video_nr, int, 0);
+MODULE_PARM_DESC(video_nr,"Allow changing video device number");
+
+module_param_named (debug, tm6000_debug, int, 0444);
+MODULE_PARM_DESC(debug,"activates debug info");
+
+module_param(vid_limit,int,0644);
+MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes");
+
--- /dev/null
+/*
+ tm6000.h - driver for TM5600/TM6000 USB video capture devices
+
+ Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation version 2
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+// Use the tm6000-hack, instead of the proper initialization code
+//#define HACK 1
+
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-vmalloc.h>
+#include "tm6000-usb-isoc.h"
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#define TM6000_VERSION KERNEL_VERSION(0, 0, 1)
+
+/* Inputs */
+#define TM6000_INPUT_TV 0
+#define TM6000_INPUT_COMPOSITE 1
+#define TM6000_INPUT_SVIDEO 2
+
+/* ------------------------------------------------------------------
+ Basic structures
+ ------------------------------------------------------------------*/
+
+struct tm6000_fmt {
+ char *name;
+ u32 fourcc; /* v4l2 format id */
+ int depth;
+};
+
+/* buffer for one video frame */
+struct tm6000_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ struct tm6000_fmt *fmt;
+};
+
+struct tm6000_dmaqueue {
+ struct list_head active;
+ struct list_head queued;
+ struct timer_list timeout;
+
+ /* thread for generating video stream*/
+ struct task_struct *kthread;
+ wait_queue_head_t wq;
+ /* Counters to control fps rate */
+ int frame;
+ int ini_jiffies;
+};
+
+/* device states */
+enum tm6000_core_state {
+ DEV_INITIALIZED = 0x01,
+ DEV_DISCONNECTED = 0x02,
+ DEV_MISCONFIGURED = 0x04,
+};
+
+/* io methods */
+enum tm6000_io_method {
+ IO_NONE,
+ IO_READ,
+ IO_MMAP,
+};
+
+enum tm6000_mode {
+ TM6000_MODE_UNKNOWN=0,
+ TM6000_MODE_ANALOG,
+ TM6000_MODE_DIGITAL,
+};
+
+struct tm6000_capabilities {
+ unsigned int has_tuner:1;
+ unsigned int has_tda9874:1;
+ unsigned int has_dvb:1;
+ unsigned int has_zl10353:1;
+ unsigned int has_eeprom:1;
+};
+
+struct tm6000_core {
+ /* generic device properties */
+ char name[30]; /* name (including minor) of the device */
+ int model; /* index in the device_data struct */
+ int devno; /* marks the number of this device */
+ v4l2_std_id norm; /* Current norm */
+
+ enum tm6000_core_state state;
+
+ /* Device Capabilities*/
+ struct tm6000_capabilities caps;
+
+ /* Tuner configuration */
+ int tuner_type; /* type of the tuner */
+ int tuner_addr; /* tuner address */
+
+ /* i2c i/o */
+ struct i2c_adapter i2c_adap;
+ struct i2c_client i2c_client;
+
+ /* video for linux */
+ struct list_head tm6000_corelist;
+ int users;
+
+ /* various device info */
+ unsigned int resources;
+ struct video_device vfd;
+ struct tm6000_dmaqueue vidq;
+
+ int input;
+ int freq;
+ unsigned int fourcc;
+
+ enum tm6000_mode mode;
+
+ /* locks */
+ struct mutex lock;
+
+ /* usb transfer */
+ struct usb_device *udev; /* the usb device */
+
+ struct usb_host_endpoint *bulk_in, *bulk_out, *isoc_in, *isoc_out;
+ unsigned int max_bulk_in, max_bulk_out;
+ unsigned int max_isoc_in, max_isoc_out;
+
+ /* scaler!=0 if scaler is active*/
+ int scaler;
+
+ /* Isoc control struct */
+ struct usb_isoc_ctl isoc_ctl;
+
+ spinlock_t slock;
+};
+
+struct tm6000_fh {
+ struct tm6000_core *dev;
+
+ /* video capture */
+ struct tm6000_fmt *fmt;
+ unsigned int width,height;
+ struct videobuf_queue vb_vidq;
+
+ enum v4l2_buf_type type;
+};
+
+#define TM6000_STD V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \
+ V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \
+ V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM
+
+/* In tm6000-core.c */
+extern unsigned long tm6000_devused;
+
+int tm6000_read_write_usb (struct tm6000_core *dev, u8 reqtype, u8 req,
+ u16 value, u16 index, u8 *buf, u16 len);
+int tm6000_get_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_init (struct tm6000_core *dev);
+int tm6000_init_after_firmware (struct tm6000_core *dev);
+
+int tm6000_init_analog_mode (struct tm6000_core *dev);
+int tm6000_set_standard (struct tm6000_core *dev, v4l2_std_id *norm);
+int tm6000_set_audio_bitrate (struct tm6000_core *dev, int bitrate);
+
+int tm6000_v4l2_register(struct tm6000_core *dev);
+int tm6000_v4l2_unregister(struct tm6000_core *dev);
+int tm6000_v4l2_exit(void);
+void tm6000_set_fourcc_format(struct tm6000_core *dev);
+
+/* In tm6000-i2c.c */
+int tm6000_i2c_register(struct tm6000_core *dev);
+int tm6000_i2c_unregister(struct tm6000_core *dev);
+void tm6000_i2c_call_clients(struct tm6000_core *dev, unsigned int cmd,
+ void *arg);
+
+/* In tm6000-queue.c */
+
+int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma);
+
+int tm6000_vidioc_streamon(struct file *file, void *priv,
+ enum v4l2_buf_type i);
+int tm6000_vidioc_streamoff(struct file *file, void *priv,
+ enum v4l2_buf_type i);
+int tm6000_vidioc_reqbufs (struct file *file, void *priv,
+ struct v4l2_requestbuffers *rb);
+int tm6000_vidioc_querybuf (struct file *file, void *priv,
+ struct v4l2_buffer *b);
+int tm6000_vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *b);
+int tm6000_vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *b);
+ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count,
+ loff_t * f_pos);
+unsigned int tm6000_v4l2_poll(struct file *file,
+ struct poll_table_struct *wait);
+int tm6000_queue_init(struct tm6000_core *dev);
+
+/* Debug stuff */
+
+extern int tm6000_debug;
+
+#define dprintk(dev, level, fmt, arg...) do {\
+ if (tm6000_debug & level) \
+ printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \
+ dev->name, __FUNCTION__ , ##arg); } while (0)
+
+#define V4L2_DEBUG_REG 0x0004
+#define V4L2_DEBUG_I2C 0x0008
+#define V4L2_DEBUG_QUEUE 0x0010
+#define V4L2_DEBUG_ISOC 0x0020
+#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */
+#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */
+
+#define tm6000_err(fmt, arg...) do {\
+ printk(KERN_ERR "tm6000 %s :"fmt, \
+ __FUNCTION__ , ##arg); } while (0)
+
+
#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
/*
* F O R M A T E N U M E R A T I O N
git.openpandora.org / pandora-kernel.git / commitdiff