usb: musb: tusb6010_omap: Do not reset the other direction's packet size

commit 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 upstream.

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index b67b4bc..659960b 100644 (file)
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -237,6 +237,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
        u32                             dma_remaining;
        int                             src_burst, dst_burst;
        u16                             csr;
+       u32                             psize;
        int                             ch;
        s8                              dmareq;
        s8                              sync_dev;
@@ -408,15 +409,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 
        if (chdat->tx) {
                /* Send transfer_packet_sz packets at a time */
-               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-                       chdat->transfer_packet_sz);
+               psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+               psize &= ~0x7ff;
+               psize |= chdat->transfer_packet_sz;
+               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
                musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
        } else {
                /* Receive transfer_packet_sz packets at a time */
-               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-                       chdat->transfer_packet_sz << 16);
+               psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+               psize &= ~(0x7ff << 16);
+               psize |= (chdat->transfer_packet_sz << 16);
+               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
                musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));