[POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 5577ec1..6b362f8 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -138,15 +138,31 @@
                        device_type = "open-pic";
                };
 
-               cpm@e0000000 {
+               cpm@919c0 {
                        #address-cells = <1>;
                        #size-cells = <1>;
-                       device_type = "cpm";
-                       model = "CPM2";
-                       ranges = <0 0 c0000>;
-                       reg = <80000 40000>;
-                       command-proc = <919c0>;
-                       brg-frequency = <9d5b340>;
+                       compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+                       reg = <919c0 30>;
+                       ranges;
+
+                       muram@80000 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 80000 10000>;
+
+                               data@0 {
+                                       compatible = "fsl,cpm-muram-data";
+                                       reg = <0 4000 9000 2000>;
+                               };
+                       };
+
+                       brg@919f0 {
+                               compatible = "fsl,mpc8560-brg",
+                                            "fsl,cpm2-brg",
+                                            "fsl,cpm-brg";
+                               reg = <919f0 10 915f0 10>;
+                               clock-frequency = <d#165000000>;
+                       };
 
                        cpmpic: pic@90c00 {
                                interrupt-controller;
@@ -155,43 +171,38 @@
                                interrupts = <2e 2>;
                                interrupt-parent = <&mpic>;
                                reg = <90c00 80>;
-                               device_type = "cpm-pic";
+                               compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
                        };
 
-                       scc@91a00 {
+                       serial@91a00 {
                                device_type = "serial";
-                               compatible = "cpm_uart";
-                               model = "SCC";
-                               device-id = <1>;
+                               compatible = "fsl,mpc8560-scc-uart",
+                                            "fsl,cpm2-scc-uart";
                                reg = <91a00 20 88000 100>;
-                               clock-setup = <00ffffff 0>;
-                               rx-clock = <1>;
-                               tx-clock = <1>;
+                               fsl,cpm-brg = <1>;
+                               fsl,cpm-command = <00800000>;
                                current-speed = <1c200>;
                                interrupts = <28 8>;
                                interrupt-parent = <&cpmpic>;
                        };
 
-                       scc@91a20 {
+                       serial@91a20 {
                                device_type = "serial";
-                               compatible = "cpm_uart";
-                               model = "SCC";
-                               device-id = <2>;
+                               compatible = "fsl,mpc8560-scc-uart",
+                                            "fsl,cpm2-scc-uart";
                                reg = <91a20 20 88100 100>;
-                               clock-setup = <ff00ffff 90000>;
-                               rx-clock = <2>;
-                               tx-clock = <2>;
+                               fsl,cpm-brg = <2>;
+                               fsl,cpm-command = <04a00000>;
                                current-speed = <1c200>;
                                interrupts = <29 8>;
                                interrupt-parent = <&cpmpic>;
                        };
 
-                       fcc@91320 {
+                       ethernet@91320 {
                                device_type = "network";
-                               compatible = "fs_enet";
-                               model = "FCC";
-                               device-id = <2>;
-                               reg = <91320 20 88500 100 913a0 30>;
+                               compatible = "fsl,mpc8560-fcc-enet",
+                                            "fsl,cpm2-fcc-enet";
+                               reg = <91320 20 88500 100 913b0 1>;
                                /*
                                 * mac-address is deprecated and will be removed
                                 * in 2.6.25.  Only recent versions of
@@ -199,20 +210,17 @@
                                 */
                                mac-address = [ 00 00 00 00 00 00 ];
                                local-mac-address = [ 00 00 00 00 00 00 ];
-                               clock-setup = <ff00ffff 250000>;
-                               rx-clock = <15>;
-                               tx-clock = <16>;
+                               fsl,cpm-command = <16200300>;
                                interrupts = <21 8>;
                                interrupt-parent = <&cpmpic>;
                                phy-handle = <&phy2>;
                        };
 
-                       fcc@91340 {
+                       ethernet@91340 {
                                device_type = "network";
-                               compatible = "fs_enet";
-                               model = "FCC";
-                               device-id = <3>;
-                               reg = <91340 20 88600 100 913d0 30>;
+                               compatible = "fsl,mpc8560-fcc-enet",
+                                            "fsl,cpm2-fcc-enet";
+                               reg = <91340 20 88600 100 913d0 1>;
                                /*
                                 * mac-address is deprecated and will be removed
                                 * in 2.6.25.  Only recent versions of
@@ -220,9 +228,7 @@
                                 */
                                mac-address = [ 00 00 00 00 00 00 ];
                                local-mac-address = [ 00 00 00 00 00 00 ];
-                               clock-setup = <ffff00ff 3700>;
-                               rx-clock = <17>;
-                               tx-clock = <18>;
+                               fsl,cpm-command = <1a400300>;
                                interrupts = <22 8>;
                                interrupt-parent = <&cpmpic>;
                                phy-handle = <&phy3>;

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index cf815b2..7748a3a 100644 (file)
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -12,6 +12,7 @@ config MPC8540_ADS
 config MPC8560_ADS
        bool "Freescale MPC8560 ADS"
        select DEFAULT_UIMAGE
+       select PPC_CPM_NEW_BINDING
        help
          This option enables support for the MPC 8560 ADS board
 

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 378a244..509d46b 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -17,13 +17,13 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/mpc85xx.h>
-#include <asm/prom.h>
 #include <asm/mpic.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
@@ -32,10 +32,8 @@
 #include <sysdev/fsl_pci.h>
 
 #ifdef CONFIG_CPM2
-#include <linux/fs_enet_pd.h>
 #include <asm/cpm2.h>
 #include <sysdev/cpm2_pic.h>
-#include <asm/fs_pd.h>
 #endif
 
 #ifdef CONFIG_PCI
@@ -95,10 +93,10 @@ static void __init mpc85xx_ads_pic_init(void)
 
 #ifdef CONFIG_CPM2
        /* Setup CPM2 PIC */
-       np = of_find_node_by_type(NULL, "cpm-pic");
+       np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
        if (np == NULL) {
-               printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
-                return;
+               printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+               return;
        }
        irq = irq_of_parse_and_map(np, 0);
 
@@ -111,81 +109,75 @@ static void __init mpc85xx_ads_pic_init(void)
  * Setup the architecture
  */
 #ifdef CONFIG_CPM2
-void init_fcc_ioports(struct fs_platform_info *fpi)
+struct cpm_pin {
+       int port, pin, flags;
+};
+
+static struct cpm_pin mpc8560_ads_pins[] = {
+       /* SCC1 */
+       {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+       /* SCC2 */
+       {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+       /* FCC2 */
+       {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+       {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
+       {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
+
+       /* FCC3 */
+       {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
+       {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+};
+
+static void __init init_ioports(void)
 {
-       struct io_port *io = cpm2_map(im_ioport);
-       int fcc_no = fs_get_fcc_index(fpi->fs_no);
-       int target;
-       u32 tempval;
-
-       switch(fcc_no) {
-       case 1:
-               tempval = in_be32(&io->iop_pdirb);
-               tempval &= ~PB2_DIRB0;
-               tempval |= PB2_DIRB1;
-               out_be32(&io->iop_pdirb, tempval);
-
-               tempval = in_be32(&io->iop_psorb);
-               tempval &= ~PB2_PSORB0;
-               tempval |= PB2_PSORB1;
-               out_be32(&io->iop_psorb, tempval);
-
-               tempval = in_be32(&io->iop_pparb);
-               tempval |= (PB2_DIRB0 | PB2_DIRB1);
-               out_be32(&io->iop_pparb, tempval);
-
-               target = CPM_CLK_FCC2;
-               break;
-       case 2:
-               tempval = in_be32(&io->iop_pdirb);
-               tempval &= ~PB3_DIRB0;
-               tempval |= PB3_DIRB1;
-               out_be32(&io->iop_pdirb, tempval);
-
-               tempval = in_be32(&io->iop_psorb);
-               tempval &= ~PB3_PSORB0;
-               tempval |= PB3_PSORB1;
-               out_be32(&io->iop_psorb, tempval);
-
-               tempval = in_be32(&io->iop_pparb);
-               tempval |= (PB3_DIRB0 | PB3_DIRB1);
-               out_be32(&io->iop_pparb, tempval);
-
-               tempval = in_be32(&io->iop_pdirc);
-               tempval |= PC3_DIRC1;
-               out_be32(&io->iop_pdirc, tempval);
-
-               tempval = in_be32(&io->iop_pparc);
-               tempval |= PC3_DIRC1;
-               out_be32(&io->iop_pparc, tempval);
-
-               target = CPM_CLK_FCC3;
-               break;
-       default:
-               printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
-               return;
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
+               struct cpm_pin *pin = &mpc8560_ads_pins[i];
+               cpm2_set_pin(pin->port, pin->pin, pin->flags);
        }
 
-       /* Port C has clocks......  */
-       tempval = in_be32(&io->iop_psorc);
-       tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
-       out_be32(&io->iop_psorc, tempval);
-
-       tempval = in_be32(&io->iop_pdirc);
-       tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
-       out_be32(&io->iop_pdirc, tempval);
-       tempval = in_be32(&io->iop_pparc);
-       tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
-       out_be32(&io->iop_pparc, tempval);
-
-       cpm2_unmap(io);
-
-       /* Configure Serial Interface clock routing.
-        * First,  clear FCC bits to zero,
-        * then set the ones we want.
-        */
-       cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX);
-       cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
 }
 #endif
 
@@ -200,6 +192,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 
 #ifdef CONFIG_CPM2
        cpm2_reset();
+       init_ioports();
 #endif
 
 #ifdef CONFIG_PCI
@@ -231,6 +224,24 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
        seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
+static struct of_device_id __initdata of_bus_ids[] = {
+       { .name = "soc", },
+       { .type = "soc", },
+       { .name = "cpm", },
+       { .name = "localbus", },
+       {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+       if (!machine_is(mpc85xx_ads))
+               return 0;
+
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
+       return 0;
+}
+device_initcall(declare_of_platform_devices);
+
 /*
  * Called very early, device-tree isn't unflattened
  */