sh: mach-edosk7705: Fix up edosk7705 so it all builds again.
authorPaul Mundt <lethal@linux-sh.org>
Wed, 17 Dec 2008 04:57:15 +0000 (13:57 +0900)
committerPaul Mundt <lethal@linux-sh.org>
Mon, 22 Dec 2008 09:44:45 +0000 (18:44 +0900)
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
arch/sh/boards/mach-edosk7705/Makefile
arch/sh/boards/mach-edosk7705/io.c
arch/sh/boards/mach-edosk7705/setup.c
arch/sh/include/asm/machvec.h
arch/sh/include/mach-common/mach/edosk7705.h

index 7d153e5..5b9c57c 100644 (file)
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/edosk7705.h>
 #include <asm/addrspace.h>
 
 #define SMC_IOADDR     0xA2000000
 
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-        #name, (port), (__u32) __builtin_return_address(0))
-
 /* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
 {
-     if (port >= 0x300 && port < 0x320) {
-         /* SMC91C96 registers are 4 byte aligned rather than the
-          * usual 2 byte!
-          */
-         return SMC_IOADDR + ( (port - 0x300) * 2);
-     }
+       /*
+        * SMC91C96 registers are 4 byte aligned rather than the
+        * usual 2 byte!
+        */
+       if (port >= 0x300 && port < 0x320)
+               return SMC_IOADDR + ((port - 0x300) * 2);
 
-     maybebadio(sh_edosk7705_isa_port2addr, port);
-     return port;
+       maybebadio(port);
+       return port;
 }
 
 /* Trying to read / write bytes on odd-byte boundaries to the Ethernet
@@ -42,53 +38,34 @@ unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
  */
 unsigned char sh_edosk7705_inb(unsigned long port)
 {
-       if (port >= 0x300 && port < 0x320 && port & 0x01) {
-               return (volatile unsigned char)(generic_inw(port -1) >> 8);
-       }
-       return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
-}
+       if (port >= 0x300 && port < 0x320 && port & 0x01)
+               return __raw_readw(port - 1) >> 8;
 
-unsigned int sh_edosk7705_inl(unsigned long port)
-{
-       return *(volatile unsigned long *)port;
+       return __raw_readb(sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_outb(unsigned char value, unsigned long port)
 {
        if (port >= 0x300 && port < 0x320 && port & 0x01) {
-               generic_outw(((unsigned short)value << 8), port -1);
+               __raw_writew(((unsigned short)value << 8), port - 1);
                return;
        }
-       *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
-}
 
-void sh_edosk7705_outl(unsigned int value, unsigned long port)
-{
-       *(volatile unsigned long *)port = value;
+       __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
 {
        unsigned char *p = addr;
-       while (count--) *p++ = sh_edosk7705_inb(port);
-}
 
-void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
-{
-       unsigned long *p = (unsigned long*)addr;
        while (count--)
-               *p++ = *(volatile unsigned long *)port;
+               *p++ = sh_edosk7705_inb(port);
 }
 
 void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
 {
-       unsigned char *p = (unsigned char*)addr;
-       while (count--) sh_edosk7705_outb(*p++, port);
-}
+       unsigned char *p = (unsigned char *)addr;
 
-void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-       unsigned long *p = (unsigned long*)addr;
-       while (count--) sh_edosk7705_outl(*p++, port);
+       while (count--)
+               sh_edosk7705_outb(*p++, port);
 }
-
index ab3f47b..d59225e 100644 (file)
@@ -9,6 +9,7 @@
  * board by S. Dunn, 2003.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/machvec.h>
 #include <mach/edosk7705.h>
 
@@ -26,18 +27,10 @@ static struct sh_machine_vector mv_edosk7705 __initmv = {
        .mv_nr_irqs             = 80,
 
        .mv_inb                 = sh_edosk7705_inb,
-       .mv_inl                 = sh_edosk7705_inl,
        .mv_outb                = sh_edosk7705_outb,
-       .mv_outl                = sh_edosk7705_outl,
-
-       .mv_inl_p               = sh_edosk7705_inl,
-       .mv_outl_p              = sh_edosk7705_outl,
 
        .mv_insb                = sh_edosk7705_insb,
-       .mv_insl                = sh_edosk7705_insl,
        .mv_outsb               = sh_edosk7705_outsb,
-       .mv_outsl               = sh_edosk7705_outsl,
 
-       .mv_isa_port2addr       = sh_edosk7705_isa_port2addr,
        .mv_init_irq            = sh_edosk7705_init_irq,
 };
index eec0d22..64b1c16 100644 (file)
@@ -14,8 +14,6 @@
 #include <linux/time.h>
 #include <asm/machtypes.h>
 
-struct device;
-
 struct sh_machine_vector {
        void (*mv_setup)(char **cmdline_p);
        const char *mv_name;
index 5bdc9d9..efc43b3 100644 (file)
@@ -1,30 +1,7 @@
-/*
- * include/asm-sh/edosk7705.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
-
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
+#ifndef __ASM_SH_EDOSK7705_H
+#define __ASM_SH_EDOSK7705_H
 
+#define __IO_PREFIX sh_edosk7705
 #include <asm/io_generic.h>
 
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */
+#endif /* __ASM_SH_EDOSK7705_H */