xilinx: Enable GUID partitions and EFI variable commands

For work with EFI it is good to have GUID partitions enabled and also
option to work with UEFI variables. That's why enable both.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index 03c81e6..7076937 100644 (file)
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -18,6 +18,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SYS_PROMPT="Versal> "
 CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
@@ -38,6 +39,7 @@ CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
+CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_BOARD=y
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_FAT=y

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 810bbdb..c94e6b3 100644 (file)
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -33,6 +33,7 @@ CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_CMD_BOOTMENU=y
 CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_BIND=y
@@ -65,6 +66,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_MTDPARTS_SPREAD=y
 CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_CMD_UBI=y
+CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
@@ -173,4 +175,5 @@ CONFIG_WDT_CDNS=y
 CONFIG_PANIC_HANG=y
 CONFIG_TPM=y
 CONFIG_SPL_GZIP=y
+# CONFIG_SPL_HEXDUMP is not set
 CONFIG_OF_LIBFDT_OVERLAY=y