treewide: transciever/transceiver spelling fixes

Just tyops.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 0011055..5dfd119 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -34,7 +34,7 @@
 #define CORGI_GPIO_LCDCON_CS           (19) /* LCD Control Chip Select */
 #define CORGI_GPIO_MAX1111_CS          (20) /* MAX1111 Chip Select */
 #define CORGI_GPIO_ADC_TEMP_ON         (21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON                       (22) /* Enable IR Transciever */
+#define CORGI_GPIO_IR_ON                       (22) /* Enable IR Transceiver */
 #define CORGI_GPIO_ADS7846_CS          (24) /* ADS7846 Chip Select */
 #define CORGI_GPIO_SD_PWR                      (33) /* MMC/SD Power */
 #define CORGI_GPIO_CHRG_ON                     (38) /* Enable battery Charging */

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
index ab1443f..4cf28f6 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -56,9 +56,9 @@
 #define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
 #define UDCOTGICR      __REG(0x40600018) /* UDC On-The-Go interrupt control */
 #define UDCOTGICR_IESF (1 << 24)       /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR (1 << 17)       /* Extra Transceiver Interrupt
                                           Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF (1 << 16)       /* Extra Transceiver Interrupt
                                           Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)     /* OTG Vbus Valid 4.0V Rising Edge
                                           Interrupt Enable */

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 9ed0f90..0f2e522 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
 static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
        /* SoC core supply, no device */
        REGULATOR_SUPPLY("v-intcore", NULL),
-       /* USB Transciever */
+       /* USB Transceiver */
        REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
 };
 

diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 3df1bc8..3876a24 100644 (file)
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -227,7 +227,7 @@ static int highlander_i2c_read(struct highlander_i2c_dev *dev)
 
        /*
         * The R0P7780LC0011RL FPGA needs a significant delay between
-        * data read cycles, otherwise the transciever gets confused and
+        * data read cycles, otherwise the transceiver gets confused and
         * garbage is returned when the read is subsequently aborted.
         *
         * It is not sufficient to wait for BBSY.

diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 48ee51b..a192285 100644 (file)
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -365,7 +365,7 @@ static int __init do_express_probe(struct net_device *dev)
                        dev->irq = mca_irqmap[(pos1>>4)&0x7];
 
                        /*
-                        * XXX: Transciever selection is done
+                        * XXX: Transceiver selection is done
                         * differently on the MCA version.
                         * How to get it to select something
                         * other than external/AUI is currently

diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 99e1ec0..19ad460 100644 (file)
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -78,7 +78,7 @@
  * Target hardware: IRWave IR320ST-2
  *
  *     The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
- *     TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ *     TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transceiver.
  *     It uses a hex inverter and some discrete components to buffer and
  *     line convert the RS232 down to 5V.
  *

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be08..ab28629 100644 (file)
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2919,7 +2919,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 
        /*
         * If we're ignoring the PHY then autoneg and the internal
-        * transciever are really not going to work so don't let the
+        * transceiver are really not going to work so don't let the
         * user select them.
         */
        if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||

diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 4b4968a..afb974b 100644 (file)
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -743,7 +743,7 @@ pci_ni8430_setup(struct serial_private *priv,
        len =  pci_resource_len(priv->dev, bar);
        p = ioremap_nocache(base, len);
 
-       /* enable the transciever */
+       /* enable the transceiver */
        writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
               p + offset + NI8430_PORTCON);
 

diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index cd16231..b01696e 100644 (file)
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -88,9 +88,9 @@
 #define UDCISR_INT_MASK        (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
 
 #define UDCOTGICR_IESF (1 << 24)       /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR (1 << 17)       /* Extra Transceiver Interrupt
                                           Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF (1 << 16)       /* Extra Transceiver Interrupt
                                           Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)     /* OTG Vbus Valid 4.0V Rising Edge
                                           Interrupt Enable */

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c71b037..bcbd1ab 100644 (file)
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1955,7 +1955,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
         *   - initializes musb->xceiv, usually by otg_get_transceiver()
         *   - stops powering VBUS
         *
-        * There are various transciever configurations.  Blackfin,
+        * There are various transceiver configurations.  Blackfin,
         * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
         * external/discrete ones in various flavors (twl4030 family,
         * isp1504, non-OTG, etc) mostly hooking up through ULPI.

diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c28225..ca9b690 100644 (file)
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -660,7 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
        int             ret = IRQ_NONE;
        struct isp1301  *isp = _isp;
 
-       /* update ISP1301 transciever from OTG controller */
+       /* update ISP1301 transceiver from OTG controller */
        if (otg_irq & OPRT_CHG) {
                omap_writew(OPRT_CHG, OTG_IRQ_SRC);
                isp1301_defer_work(isp, WORK_UPDATE_ISP);
@@ -755,7 +755,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
                ret = IRQ_HANDLED;
 
-       /* switch driver; the transciever code activates it,
+       /* switch driver; the transceiver code activates it,
         * ungating the udc clock or resuming OHCI.
         */
        } else if (otg_irq & DRIVER_SWITCH) {

diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index f4594d7..ca39896 100644 (file)
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -87,7 +87,7 @@ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;     /* ID for this card */
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;/* Enable this card */
 static char *model[SNDRV_CARDS];
 static int omni[SNDRV_CARDS];                          /* Delta44 & 66 Omni I/O support */
-static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transciever reset timeout value in msec */
+static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transceiver reset timeout value in msec */
 static int dxr_enable[SNDRV_CARDS];                    /* DXR enable for DMX6FIRE */
 
 module_param_array(index, int, NULL, 0444);