powerpc/85xx: add Freescale P5040 SOC and SEC v5.2 device trees
authorKim Phillips <kim.phillips@freescale.com>
Thu, 26 Jul 2012 15:08:53 +0000 (10:08 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 12 Sep 2012 19:57:07 +0000 (14:57 -0500)
Add device tree (dtsi) files for the Freescale P5040 SOC.  Since this
SOC introduces SEC v5.2, add the dtsi file for that also.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi [new file with mode: 0644]

diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
new file mode 100644 (file)
index 0000000..db2c9a7
--- /dev/null
@@ -0,0 +1,320 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+&lbc {
+       compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
+       interrupts = <25 2 0 0>;
+       #address-cells = <2>;
+       #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+       compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       clock-frequency = <33333333>;
+       interrupts = <16 2 1 15>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <16 2 1 15>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 40 1 0 0
+                       0000 0 0 2 &mpic 1 1 0 0
+                       0000 0 0 3 &mpic 2 1 0 0
+                       0000 0 0 4 &mpic 3 1 0 0
+                       >;
+       };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+       compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0 0xff>;
+       clock-frequency = <33333333>;
+       interrupts = <16 2 1 14>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <16 2 1 14>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 41 1 0 0
+                       0000 0 0 2 &mpic 5 1 0 0
+                       0000 0 0 3 &mpic 6 1 0 0
+                       0000 0 0 4 &mpic 7 1 0 0
+                       >;
+       };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+       compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       clock-frequency = <33333333>;
+       interrupts = <16 2 1 13>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <16 2 1 13>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 42 1 0 0
+                       0000 0 0 2 &mpic 9 1 0 0
+                       0000 0 0 3 &mpic 10 1 0 0
+                       0000 0 0 4 &mpic 11 1 0 0
+                       >;
+       };
+};
+
+&dcsr {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "fsl,dcsr", "simple-bus";
+
+       dcsr-epu@0 {
+               compatible = "fsl,dcsr-epu";
+               interrupts = <52 2 0 0
+                             84 2 0 0
+                             85 2 0 0>;
+               reg = <0x0 0x1000>;
+       };
+       dcsr-npc {
+               compatible = "fsl,dcsr-npc";
+               reg = <0x1000 0x1000 0x1000000 0x8000>;
+       };
+       dcsr-nxc@2000 {
+               compatible = "fsl,dcsr-nxc";
+               reg = <0x2000 0x1000>;
+       };
+       dcsr-corenet {
+               compatible = "fsl,dcsr-corenet";
+               reg = <0x8000 0x1000 0xB0000 0x1000>;
+       };
+       dcsr-dpaa@9000 {
+               compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
+               reg = <0x9000 0x1000>;
+       };
+       dcsr-ocn@11000 {
+               compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
+               reg = <0x11000 0x1000>;
+       };
+       dcsr-ddr@12000 {
+               compatible = "fsl,dcsr-ddr";
+               dev-handle = <&ddr1>;
+               reg = <0x12000 0x1000>;
+       };
+       dcsr-ddr@13000 {
+               compatible = "fsl,dcsr-ddr";
+               dev-handle = <&ddr2>;
+               reg = <0x13000 0x1000>;
+       };
+       dcsr-nal@18000 {
+               compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
+               reg = <0x18000 0x1000>;
+       };
+       dcsr-rcpm@22000 {
+               compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
+               reg = <0x22000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@40000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu0>;
+               reg = <0x40000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@41000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu1>;
+               reg = <0x41000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@42000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu2>;
+               reg = <0x42000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@43000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu3>;
+               reg = <0x43000 0x1000>;
+       };
+};
+
+&soc {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       device_type = "soc";
+       compatible = "simple-bus";
+
+       soc-sram-error {
+               compatible = "fsl,soc-sram-error";
+               interrupts = <16 2 1 29>;
+       };
+
+       corenet-law@0 {
+               compatible = "fsl,corenet-law";
+               reg = <0x0 0x1000>;
+               fsl,num-laws = <32>;
+       };
+
+       ddr1: memory-controller@8000 {
+               compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+               reg = <0x8000 0x1000>;
+               interrupts = <16 2 1 23>;
+       };
+
+       ddr2: memory-controller@9000 {
+               compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+               reg = <0x9000 0x1000>;
+               interrupts = <16 2 1 22>;
+       };
+
+       cpc: l3-cache-controller@10000 {
+               compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+               reg = <0x10000 0x1000
+                      0x11000 0x1000>;
+               interrupts = <16 2 1 27
+                             16 2 1 26>;
+       };
+
+       corenet-cf@18000 {
+               compatible = "fsl,corenet-cf";
+               reg = <0x18000 0x1000>;
+               interrupts = <16 2 1 31>;
+               fsl,ccf-num-csdids = <32>;
+               fsl,ccf-num-snoopids = <32>;
+       };
+
+       iommu@20000 {
+               compatible = "fsl,pamu-v1.0", "fsl,pamu";
+               reg = <0x20000 0x5000>;
+               interrupts = <
+                       24 2 0 0
+                       16 2 1 30>;
+       };
+
+/include/ "qoriq-mpic.dtsi"
+
+       guts: global-utilities@e0000 {
+               compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
+               reg = <0xe0000 0xe00>;
+               fsl,has-rstcr;
+               #sleep-cells = <1>;
+               fsl,liodn-bits = <12>;
+       };
+
+       pins: global-utilities@e0e00 {
+               compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
+               reg = <0xe0e00 0x200>;
+               #sleep-cells = <2>;
+       };
+
+       clockgen: global-utilities@e1000 {
+               compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+               reg = <0xe1000 0x1000>;
+               clock-frequency = <0>;
+       };
+
+       rcpm: global-utilities@e2000 {
+               compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
+               reg = <0xe2000 0x1000>;
+               #sleep-cells = <1>;
+       };
+
+       sfp: sfp@e8000 {
+               compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
+               reg        = <0xe8000 0x1000>;
+       };
+
+       serdes: serdes@ea000 {
+               compatible = "fsl,p5040-serdes";
+               reg        = <0xea000 0x1000>;
+       };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+       spi@110000 {
+               fsl,espi-num-chipselects = <4>;
+       };
+
+/include/ "qoriq-esdhc-0.dtsi"
+       sdhc@114000 {
+               sdhci,auto-cmd12;
+       };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+               usb0: usb@210000 {
+                       compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+                       phy_type = "utmi";
+                       port0;
+               };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+               usb1: usb@211000 {
+                       compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+                       dr_mode = "host";
+                       phy_type = "utmi";
+               };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec5.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
new file mode 100644 (file)
index 0000000..52721b6
--- /dev/null
@@ -0,0 +1,111 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+/ {
+       compatible = "fsl,P5040";
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       aliases {
+               ccsr = &soc;
+               dcsr = &dcsr;
+
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
+               serial3 = &serial3;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+               usb0 = &usb0;
+               usb1 = &usb1;
+               dma0 = &dma0;
+               dma1 = &dma1;
+               sdhc = &sdhc;
+               msi0 = &msi0;
+               msi1 = &msi1;
+               msi2 = &msi2;
+
+               crypto = &crypto;
+               sec_jr0 = &sec_jr0;
+               sec_jr1 = &sec_jr1;
+               sec_jr2 = &sec_jr2;
+               sec_jr3 = &sec_jr3;
+               rtic_a = &rtic_a;
+               rtic_b = &rtic_b;
+               rtic_c = &rtic_c;
+               rtic_d = &rtic_d;
+               sec_mon = &sec_mon;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: PowerPC,e5500@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       next-level-cache = <&L2_0>;
+                       L2_0: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu1: PowerPC,e5500@1 {
+                       device_type = "cpu";
+                       reg = <1>;
+                       next-level-cache = <&L2_1>;
+                       L2_1: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu2: PowerPC,e5500@2 {
+                       device_type = "cpu";
+                       reg = <2>;
+                       next-level-cache = <&L2_2>;
+                       L2_2: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu3: PowerPC,e5500@3 {
+                       device_type = "cpu";
+                       reg = <3>;
+                       next-level-cache = <&L2_3>;
+                       L2_3: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
new file mode 100644 (file)
index 0000000..7b2ab8a
--- /dev/null
@@ -0,0 +1,118 @@
+/*
+ * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+       compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
+       #address-cells = <1>;
+       #size-cells = <1>;
+       reg              = <0x300000 0x10000>;
+       ranges           = <0 0x300000 0x10000>;
+       interrupts       = <92 2 0 0>;
+
+       sec_jr0: jr@1000 {
+               compatible = "fsl,sec-v5.2-job-ring",
+                            "fsl,sec-v5.0-job-ring",
+                            "fsl,sec-v4.0-job-ring";
+               reg = <0x1000 0x1000>;
+               interrupts = <88 2 0 0>;
+       };
+
+       sec_jr1: jr@2000 {
+               compatible = "fsl,sec-v5.2-job-ring",
+                            "fsl,sec-v5.0-job-ring",
+                            "fsl,sec-v4.0-job-ring";
+               reg = <0x2000 0x1000>;
+               interrupts = <89 2 0 0>;
+       };
+
+       sec_jr2: jr@3000 {
+               compatible = "fsl,sec-v5.2-job-ring",
+                            "fsl,sec-v5.0-job-ring",
+                            "fsl,sec-v4.0-job-ring";
+               reg = <0x3000 0x1000>;
+               interrupts = <90 2 0 0>;
+       };
+
+       sec_jr3: jr@4000 {
+               compatible = "fsl,sec-v5.2-job-ring",
+                            "fsl,sec-v5.0-job-ring",
+                            "fsl,sec-v4.0-job-ring";
+               reg = <0x4000 0x1000>;
+               interrupts = <91 2 0 0>;
+       };
+
+       rtic@6000 {
+               compatible = "fsl,sec-v5.2-rtic",
+                            "fsl,sec-v5.0-rtic",
+                            "fsl,sec-v4.0-rtic";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0x6000 0x100>;
+               ranges = <0x0 0x6100 0xe00>;
+
+               rtic_a: rtic-a@0 {
+                       compatible = "fsl,sec-v5.2-rtic-memory",
+                                    "fsl,sec-v5.0-rtic-memory",
+                                    "fsl,sec-v4.0-rtic-memory";
+                       reg = <0x00 0x20 0x100 0x80>;
+               };
+
+               rtic_b: rtic-b@20 {
+                       compatible = "fsl,sec-v5.2-rtic-memory",
+                                    "fsl,sec-v5.0-rtic-memory",
+                                    "fsl,sec-v4.0-rtic-memory";
+                       reg = <0x20 0x20 0x200 0x80>;
+               };
+
+               rtic_c: rtic-c@40 {
+                       compatible = "fsl,sec-v5.2-rtic-memory",
+                                    "fsl,sec-v5.0-rtic-memory",
+                                    "fsl,sec-v4.0-rtic-memory";
+                       reg = <0x40 0x20 0x300 0x80>;
+               };
+
+               rtic_d: rtic-d@60 {
+                       compatible = "fsl,sec-v5.2-rtic-memory",
+                                    "fsl,sec-v5.0-rtic-memory",
+                                    "fsl,sec-v4.0-rtic-memory";
+                       reg = <0x60 0x20 0x500 0x80>;
+               };
+       };
+};
+
+sec_mon: sec_mon@314000 {
+       compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+       reg = <0x314000 0x1000>;
+       interrupts = <93 2 0 0>;
+};